Search Results

Search found 19308 results on 773 pages for 'network efficiency'.

Page 238/773 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

  • Wireless/Bluetooth problems on t43p

    - by user75965
    I have been struggling to get my wireless mini pcmcia card recognised by 12.04. It suddenly stopped, mid session. I have taken it out and replaced with a couple of spares with slightly different serial numbers. One had no joy - 'unauathorised'. The other worked briefly for thunderbird but not firefox, it seemed. The network controller reads like this: 0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) I have ordered a replacement from ebay, and hope I got the right one - used the the FRU number from the one that stopped working. But I have ALWAYS had no joy with my Thinkpad t43p Bluetooth and Ubuntu ( 12.04, and even 11.04 and 11.10, if I remember rightly). Do you think the Bluetooth problem will solve with a new mini pcmcia? Surely not, as it has never worked, whereas Wireless worked until a couple of weeks ago...

    Read the article

  • Broadcom bcm4313 Ubuntu 13.10 connection time out

    - by Wahtever
    After upgrading to Ubuntu 13.10 I keep getting connection timed out every few seconds at which point i have to disconnect and reconnect to the WiFi network. The WiFi card worked fine on 13.04 with the bcmwl-kernel-source installed but giving problems on 13.10: *-network description: Wireless interface product: BCM4313 802.11bgn Wireless Network Adapter vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 01 serial: c0:14:3d:cc:c9:c7 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.4 latency=0 multicast=yes wireless=IEEE 802.11abg resources: irq:17 memory:f0500000-f0503fff How can i fix this? Thanks

    Read the article

  • Slow writing HDD speed, Ubuntu 12.04 64-bit, Thinkpad T520i

    - by pyc
    It seems that (but I'm not completely sure), that when I'm copying files from gigabit network to HDD, I can't use full potential of the network which in my case is about 60 MB/s, because HDD writing is so slow like lower than 10 MB/s, and also it's slowing down the whole system which becomes pretty much unresponsive, almost impossible to work with. Copying files to samba share residing at Ubuntu machine, connected to share from Windows 7, I'm completely sure my network equipment is OK, and there's no CPU intensive process on Ubuntu except smbd getting about 10-20% from time to time which I think is OK. Something here is burried deep I think, maybe even in kernel. Already tried to switch from AHCI to compatibility mode, and turning acpi on and off - nothing helped. So it's like HDD buffer is full and emptying slowly while machine is sluggish, load is about 3 to 4. Somebody experienced the similar problems? Some help on troubleshooting process and identifying the cause would be helpful too :) Thanks!

    Read the article

  • Android - Multiplayer Game - Client / Server - Java etc

    - by user1405328
    I must write a multiplayer pong game for the school. Where are thousand of rooms and where two players can go in to a room and play together and collect points. I programmed the Pong game using Java (LibGDX). How can I do the Network part. I searched the web. And I came across Kryonet. Is there something better? What should I google. On the Internet there are a lot of those questions. And no good answers. I hope that this most questions can be answered. If someone has actual Open Source network game links, tutorials, books, network tutorial, etc. All this would help everyone. Thank you.

    Read the article

  • ubuntu will not connect after restart

    - by nicedoggy
    Firstly, I hope this hasn't been covered elsewhere, I have searched but haven't found this particular problem. I updated to 12.04 a while back and though I now thoroughly regret that decision, I'm able to live with 12.04 and all it's odd little quirks. The one problem that I would like to fix is this. I have a small network, using a router modem which stays on most of the time. If the computer is switched off, when it is switched on again I have to click on "auto Ethernet" in "Network" in order to get on the internet. It then works fine. Previous versions just connected automatically on restart. When 12.04 says it is unable to connect, other computers on the network are able to connect. Thanks for any help.

    Read the article

  • Need instructions on how to create wpa_supplicant.conf and add fast_reauth=0 to it

    - by nutty about natty
    Like many other natty users on a university/academic network, I'm experiencing annoying frequent disconnects/hangs/delays. See, for instance here. I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: README You will need to make a configuration file, e.g. /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

    Read the article

  • USB modem dosn't working in Ubuntu

    - by skeeph
    In Ubuntu 12.10 USB-modem Huawei 171 from MTS is not connected to the network. First on the message "Are you registered on the network", immediately after that, "You are disconnected from the network." This happened after there was an internal error notification Ubuntu. I did not pay attention, and closed by sending the report. After the reboot does not work. Settings are not changed. I am online with this modem in Windows 8. Could you tell me why it is not working,please thank you in advance P.S Sorry for my English. It's foreign language for me. Please mention to me where are my mistakes. Thanks

    Read the article

  • Connect to a VPN from a Virtual Machine

    - by kaharas
    I am running an Ubuntu ditro inside a VMWare virtual machine with a bridged connection on a windows 7 host. What I am trying to do is to have the virtual machine connect to a VPN, but I'm not having much success. At first, the system was using wicd, but I replaced it with network-manager who's supposed to have OpenVPN support. The problem is, even tho i've purged the wicd installation, there're connections shown in the network manager, and still, I'm able to access the net. I've also added the openvpn data in the network manager tab, but it's shown as never used. PS: when I try to stop and start the NetworkManager service, an error message pops up telling me that there's not such a service, but apt-get tells me i've already installed it...

    Read the article

  • How to copy the file from source to destination only once at a time?

    - by Viswa
    I have to copy the file from my desktop to my mounted directory. I was using the following command to copy the file from my desktop to mounted directory. os.system("cp -f /home/Desktop/filename /media/folder_1"). It works fine. But the problem is while copying the file from my source to mounted directory(folder_1) if any interruption is happens like network down, then the system continuously keep on trying. It couldn't skip that process. Finally, when the network comes the files are again copy to my mounted directory. Due to this continuous trying, next time i try to move the content it throws "permission denied" error. How do i copy the file only once, if any network issues happen then it will not keep try to copy, instead of that, it throws the error. If you know, Let me. Its very useful to me.

    Read the article

  • How to define default gateway with multiple DHCP interfaces?

    - by DrumEater
    How does ifconfig determine which network interface to use as the default when DHCP assigns a default route for each NIC? It seems like it's in a race-condition and I need to have a more reliable solution. Is there a setting in /etc/network/interfaces that could define the preferred gateway? I read about "metric" but that did not seem to function. 10.04 LTS Server with two NICs on a managed network. IP addresses are assigned via DHCP which I do not manage. eth0 is assigned a private NAT address; eth1 is assigned a public IP.

    Read the article

  • Ubuntu 12.10 hasa no wireless connectivity on Dell Inspiron 1520

    - by Jorge Tijerina
    I have just installed Ubuntu for the first time ever. I have just installed it in a Dell Inspiron 1520 that came pre installed with Windows Vista and i currently run both of the OS (I just choose when the computer starts up). The wifi definitely works on the computer since i used it to download Ubuntu in the first place when I was using Vista. The Network Manager says that I only have a 'Wired' Network and it doesn't have any other options to choose from. I connected the Laptop into a wired connection and downloaded the 'Wicd Network Manager' but it had no effect either. From there I continued to go into 'Software Sources' and installed the wireless drive but that had no effect either. So... What can I do?

    Read the article

  • Create a HotSpot which requires a username and password

    - by Trumbun
    I wish to set up a wireless access point which requires a username and password in order for clients to use the internet. The network setup will be internet modem connected to an Ubuntu Server (2 networks cards). The first network cards to get the internet to the server and the second network card to connect the the wifi hotspot. The server will host the software such as (Example software for windows) which will control the user connected by forcing them to login with the credentials given at the reception. Can some suggest some software that I can use? Thanks in advance

    Read the article

  • help me about install ubuntu server 12.04 on vmware

    - by zohreh
    I want to install Ubuntu server 64-bit on vmware 8.0.2 but I face with a problem ! I don't know why ! the problem is: From here you can choose to retry DHCP network autoconfiguration (which may succeed if your DHCP server takes a long time to respond) or to configure the network manually. Some DHCP servers require a DHCP hostname to be sent by the client, so you can also choose to retry DHCP network autoconfiguration with a hostname that you provide. there are 4 option for Continuation i don't know exactly to select which option also what is The cause of the problem? thanks a lot

    Read the article

  • Is the upgrade server working? Im upgrading from 8.10 to 9.04 [closed]

    - by jarod
    Possible Duplicate: How to install software or upgrade from old unsupported release? Is the upgrade server working? Im upgrading from 8.10 to 9.04 and it says "extracting the upgrade failed there may be a problem with the network or the server." Also when I hit check it says "Could not download all repository indexes The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct." and Failed to fetch http://security.ubuntu.com/ubuntu/dists/intrepid-security/main/binary-i386/Packages.gz 404 Not Found [IP: 91.189.92.184 80] and then a bunch more failed to fetch

    Read the article

  • CodePlex Daily Summary for Thursday, February 10, 2011

    CodePlex Daily Summary for Thursday, February 10, 2011Popular ReleasesSnoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! Work Item Description 5149 Dan Hanan: You can now use the mouse wheel t...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...WatchersNET.TagCloud: WatchersNET.TagCloud 01.09.03: Whats NewAdded New Skin TagTastic http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-TagTastic-Skin.jpg Added New Skin RoundedButton http://www.watchersnet.de/Portals/0/screenshots/dnn/TagCloud-RoundedButton-Skin.jpg changes Tag Count fixed on Tag Source Referrals Fixed Tag Count when multiple Tag Sources are usedFinestra Virtual Desktops: 1.1: This release adds a few more performance and graphical enhancements to 1.0. Switching desktops is now about as fast as you can blink. Desktop switching optimizations New welcome wizard for Vista/7 Fixed a few minor bugs Added a few more options to the options dialog (including ability to disable the taskbar switching)WCF Data Services Toolkit: WCF Data Services Toolkit: The source code and binary releases of the WCF Data Services Toolkit. For simplicity, the source code download doesn't include any of the MSTest files. If you want those, you can pull the code down via MercurialyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Video capturing improved Supports YouTube's new layout (january 2011) Internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.ReSharper Settings Manager: RSM v4.0 (For ReSharper 5.1): Donate ChangesChanged the mechanism of locating shared settings files (discussion, issue): You can now create a set of "global" settings files and configure how R# settings will get loaded (settings inheritance and overrides). All solutions located at the same folder and\or subfolders where the global settings file is located will load that file automatically. Improved "Manage Settings" dialog to support new settings sharing features. Bug fixes: 228048 16590 16584Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.New ProjectsAJAX Map DataConnector: AJAX Map DataConnector is an Open Source + Open Data project focused on connecting the power of Bing Maps AJAX Control, Version 7.0 to the spatial query capabilities of SQL Server 2008. The examples provided here represent a starting point, showing some ways to harness SQL ServerASP.NET Mvc Cdn Management: Cdn Management loads different resources (like styles, scripts etc) from configuration file. It reads resource location (url) from a configuration file and renders it into a page.Azure Content Provider for Telerik File Browser: Windows Azure Storage FileBrowserContentProvider makes it easier for web developers to Connect the Telerik RadFileExplorer control to the Windows Azure Storage. It's developed in VB.NET. BeerForge: BeerForge is an open source application for the home brewer to ease the creation of beer recipes and provide handy calculation tools.budget-manage: ???????????,??????????。Command Line Parsing, C++ and C#: This is a simple project that does command line arguments parsing. C# and C++ projects are supplied, together with unit tests.DeleteAfterRunning: Application allowing you to convert any file to self-deleting executable. You have a picture, audio file or a document you want to share, but don’t want anyone to keep a copy? Simply create a self-deleting package using DeleteAfterRunning that can be opened only once.DotNetNuke Contest: A module for contest voting in DotNetNuke.Foundry: Experiments in language design and data modeling.GenAttributeLib: Libreria per la gestione di attributi generici di un oggetto.Graduation Project Management System: This is our graduation project. It uses Asp.net Mvc 3,Jquery,Ado.net Entity Framework,and so on. by Veiller hu,ZSPiKnow - A tiny wiki: iKnow is a (really) tiny wiki. Up and running in 5 minutes, easy to customize and of course open source and free to use.internationalOffice: This will contain all the code and bugs for a student project.Iroo Package Manager: Orchard package management UI (auto-update)Iroo Version Manager: Version management for Content ItemsJavApi: JavApi provides a collection of .NET classes in the form of the Java API. It thus allows you to use an identical API to develop for both platforms.jsfcore @ Personal Repository: This project contains s wmultiple sampleith various snippets and projects from blog posts, user group talks, and conference sessions. M3 CMS: M3 Cms is a lightweight content management system built on the ASP.NET MVC 4.0 framework. Uses SQLCE database and nHibernate+ActiveRecord framework.Market-Basket Synthetic Data Generator: An open-source C# market-basket synthetic data generator, capable of creating transactions, sequences and taxonomies, based on the IBM Quest version. Written to address the maintainability and portability problems of the original, feedback, fixes and extensions are encouraged!MicroLinq : Libraries for .NET Micro Framework: MicroLinq is a project to bring a small subset of the power of Linq to the .NET Micro Framework. Over time (hours) the project has expanded to include other helpful libraries and proof of concept code others might find useful.MJPEG Decoder for WPF, WinForms, WP7 and XNA: Library to decode MJPEG streams for Silverlight, Windows Phone 7, XNA 4.0, WinForms, and WPF. Sample code showing usage is included with the distribution. For more information, see the full article at Coding4Fun.modSIC: Modulo's Open Distributed SCAP Infrastructure Collector, or modSIC, makes it easier for security analysts to scan an environment vulnerabilities/compliance based on OVAL-Definitions file. It's an open source service specializing in distributed assessment on a network.MoneyTracker: MoneyTracker is used to keep track of transactions, create your own categories and view reports.PixelsCMS: ASP.NET CMS, PixelsCMS, MVC 2rainTwitter: A twitter module/skin for the rainmeter Windows desktop customization platform. (IN DEVELOPMENT)Reactor.ServiceBus: Reactor Service Bus is a light weight .Net service bus built upon the Apache NMS abstraction library. It provides a slim and easy to use interface that supports all the underlying brokers NMS supports.RsMenu: RsMenu es un MenuStrip que permite tener los Informes de Reporting Services en un elegante menu en nuestra aplicacion winform.Top Protocols Expert for Network Monitor: A Network Monitor Expert which shows you the usage frequency of protocols in a trace. This expert plugs into the Network Monitor UI so you run it directly from the Expert menu. trollr.net - remotely configure & control your .Net applications: trollr.net provides a remote configuration and control network to the .Net apps in your enterprise. App configuration becomes centralised and live/runtime changes are pushed to each application - no restart required to pick up the change. Cache control commands can also be sent!Tweet 4 ME: Tweet 4 ME is a Java Micro Edition (MIDP 2.0 CLDC 1.0) based Twitter client built with a custom GUI framework. The application is part of a college project.UntitledGameProject: Untitled Game Project, Logic and Design for eventual port to Android, IOS and WP7web-framework: web??????????。C#??,framework2.0,???????。WebMatrix helpers from old school teachings: Remember when the web was fun? Well it's back with WebMatrix. We are providing just a few minor helper extensions with a sample app that should help Neo on his quest to be one with the Matrix.

    Read the article

  • Why from a virtualized Ubuntu system I can't discover the ip address of my router?

    - by AndreaNobili
    I am not into computer network and I have the following problem finding my router IP address. I have a Windows 8 PC on on which it is installed VmWare Workstation that virtualizes Linux Ubuntu. The network adapter settings of this Virtual Machine is setted as NAT. Now my problem is that if in the Windows 8 DOS shell I perform the ifconfig statment I obtain C:\Users\Andrea>ipconfig Configurazione IP di Windows Scheda Ethernet tap0: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Ethernet Connessione di rete Bluetooth: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Connessione alla rete locale (LAN)* 11: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda LAN wireless Wi-Fi: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::89ff:6d12:49cf:4354%13 Indirizzo IPv4. . . . . . . . . . . . : 192.168.1.3 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : 192.168.1.1 Scheda Ethernet Ethernet: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Ethernet VMware Network Adapter VMnet1: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::edb3:8352:f954:2b0c%23 Indirizzo IPv4. . . . . . . . . . . . : 192.168.129.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Ethernet VMware Network Adapter VMnet8: Suffisso DNS specifico per connessione: Indirizzo IPv6 locale rispetto al collegamento . : fe80::d00b:8c6e:98b:f1ec%24 Indirizzo IPv4. . . . . . . . . . . . : 192.168.15.1 Subnet mask . . . . . . . . . . . . . : 255.255.255.0 Gateway predefinito . . . . . . . . . : Scheda Tunnel Teredo Tunneling Pseudo-Interface: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.techub.lan: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: techub.lan Scheda Tunnel isatap.{5B95051D-79AB-4147-92CF-3A2E16698432}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.{340A5FAD-1597-402E-B658-29C37E8F7BC2}: Stato supporto. . . . . . . . . . . . : Supporto disconnesso Suffisso DNS specifico per connessione: Scheda Tunnel isatap.DSL2750B: Suffisso DNS specifico per connessione: DSL2750B Indirizzo IPv6 locale rispetto al collegamento . : fe80::5efe:192.168.1.3%26 Gateway predefinito . . . . . . . . . : So, looking at the previous output it appear clear that the default gateway (my router) is: 192.168.1.1, infact if I open it into a browser it apear to me the login mask to enter in the router settings.... Ok, if now I open the virtualized Ubuntu shell and perform the route command I obtain this output: andrea@andrea-virtual-machine:~$ route Tabella di routing IP del kernel Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.15.2 0.0.0.0 UG 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.15.0 * 255.255.255.0 U 1 0 0 eth0 So, here it say to me that the default gateway is 192.168.15.2 (that is not my router ip address), why? My idea is that it could depend by the NAT. Because my Windows system is connected using the wireless but in the virtualized Ubuntu I see that I am connected to a "wired network". So I think that the NAT virtualize a network adapter (or something like this) and that 192.168.15.2 could be the ip address of this network adapter... But it seems strange to me because, as you can see in the previous ipconfig output the VmWare network adapter addresses are: 192.168.129.1 and 192.168.15.1. So I have also 2 others doubts: 1) What device represents the 192.168.15.2 ip address that the virtualized Ubuntu see as Default gateway but that is not my router? 2) What exactly do the two VmWare network adapter that I have configured into my Windows 8 system? There is a way to discover my router ip from the virtualized Ubuntu system ? Tnx Andrea

    Read the article

  • New Communications Industry Data Model with "Factory Installed" Predictive Analytics using Oracle Da

    - by charlie.berger
    Oracle Introduces Oracle Communications Data Model to Provide Actionable Insight for Communications Service Providers   We've integrated pre-installed analytical methodologies with the new Oracle Communications Data Model to deliver automated, simple, yet powerful predictive analytics solutions for customers.  Churn, sentiment analysis, identifying customer segments - all things that can be anticipated and hence, preconcieved and implemented inside an applications.  Read on for more information! TM Forum Management World, Nice, France - 18 May 2010 News Facts To help communications service providers (CSPs) manage and analyze rapidly growing data volumes cost effectively, Oracle today introduced the Oracle Communications Data Model. With the Oracle Communications Data Model, CSPs can achieve rapid time to value by quickly implementing a standards-based enterprise data warehouse that features communications industry-specific reporting, analytics and data mining. The combination of the Oracle Communications Data Model, Oracle Exadata and the Oracle Business Intelligence (BI) Foundation represents the most comprehensive data warehouse and BI solution for the communications industry. Also announced today, Hong Kong Broadband Network enhanced their data warehouse system, going live on Oracle Communications Data Model in three months. The leading provider increased its subscriber base by 37 percent in six months and reduced customer churn to less than one percent. Product Details Oracle Communications Data Model provides industry-specific schema and embedded analytics that address key areas such as customer management, marketing segmentation, product development and network health. CSPs can efficiently capture and monitor critical data and transform it into actionable information to support development and delivery of next-generation services using: More than 1,300 industry-specific measurements and key performance indicators (KPIs) such as network reliability statistics, provisioning metrics and customer churn propensity. Embedded OLAP cubes for extremely fast dimensional analysis of business information. Embedded data mining models for sophisticated trending and predictive analysis. Support for multiple lines of business, such as cable, mobile, wireline and Internet, which can be easily extended to support future requirements. With Oracle Communications Data Model, CSPs can jump start the implementation of a communications data warehouse in line with communications-industry standards including the TM Forum Information Framework (SID), formerly known as the Shared Information Model. Oracle Communications Data Model is optimized for any Oracle Database 11g platform, including Oracle Exadata, which can improve call data record query performance by 10x or more. Supporting Quotes "Oracle Communications Data Model covers a wide range of business areas that are relevant to modern communications service providers and is a comprehensive solution - with its data model and pre-packaged templates including BI dashboards, KPIs, OLAP cubes and mining models. It helps us save a great deal of time in building and implementing a customized data warehouse and enables us to leverage the advanced analytics quickly and more effectively," said Yasuki Hayashi, executive manager, NTT Comware Corporation. "Data volumes will only continue to grow as communications service providers expand next-generation networks, deploy new services and adopt new business models. They will increasingly need efficient, reliable data warehouses to capture key insights on data such as customer value, network value and churn probability. With the Oracle Communications Data Model, Oracle has demonstrated its commitment to meeting these needs by delivering data warehouse tools designed to fill communications industry-specific needs," said Elisabeth Rainge, program director, Network Software, IDC. "The TM Forum Conformance Mark provides reassurance to customers seeking standards-based, and therefore, cost-effective and flexible solutions. TM Forum is extremely pleased to work with Oracle to certify its Oracle Communications Data Model solution. Upon successful completion, this certification will represent the broadest and most complete implementation of the TM Forum Information Framework to date, with more than 130 aggregate business entities," said Keith Willetts, chairman and chief executive officer, TM Forum. Supporting Resources Oracle Communications Oracle Communications Data Model Data Sheet Oracle Communications Data Model Podcast Oracle Data Warehousing Oracle Communications on YouTube Oracle Communications on Delicious Oracle Communications on Facebook Oracle Communications on Twitter Oracle Communications on LinkedIn Oracle Database on Twitter The Data Warehouse Insider Blog

    Read the article

  • Python — Time complexity of built-in functions versus manually-built functions in finite fields

    - by stackuser
    Generally, I'm wondering about the advantages versus disadvantages of using the built-in arithmetic functions versus rolling your own in Python. Specifically, I'm taking in GF(2) finite field polynomials in string format, converting to base 2 values, performing arithmetic, then output back into polynomials as string format. So a small example of this is in multiplication: Rolling my own: def multiply(a,b): bitsa = reversed("{0:b}".format(a)) g = [(b<<i)*int(bit) for i,bit in enumerate(bitsa)] return reduce(lambda x,y: x+y,g) Versus the built-in: def multiply(a,b): # a,b are GF(2) polynomials in binary form .... return a*b #returns product of 2 polynomials in gf2 Currently, operations like multiplicative inverse (with for example 20 bit exponents) take a long time to run in my program as it's using all of Python's built-in mathematical operations like // floor division and % modulus, etc. as opposed to making my own division, remainder, etc. I'm wondering how much of a gain in efficiency and performance I can get by building these manually (as shown above). I realize the gains are dependent on how well the manual versions are built, that's not the question. I'd like to find out 'basically' how much advantage there is over the built-in's. So for instance, if multiplication (as in the example above) is well-suited for base 10 (decimal) arithmetic but has to jump through more hoops to change bases to binary and then even more hoops in operating (so it's lower efficiency), that's what I'm wondering. Like, I'm wondering if it's possible to bring the time down significantly by building them myself in ways that maybe some professionals here have already come across.

    Read the article

  • links for 2010-05-25

    - by Bob Rhubart
    Oracle Customer Success Self-Assessment Free, 10-minute online self-assessment designed to share Oracle Customer Services good practices across five domains: Strategy, Process, Technology, People, and Governance. (tags: oracle otn entarch) Porus Homi Havewala: Oracle Enterprise Manager 11g Grid Control simplifies RAC management in Oracle Exadata V2 "In Oracle Database 11g Release 2, which is the latest version of the database used in Oracle Exadata Version 2, RAC install and management is vastly simplified, especially if you are using Oracle Enterprise Manager 11g Grid Control." Oracle ACE Director Porus Homi Havewala (tags: oracle otn architect ace grid database exadata) @fteter: Just Do It "Make a [SOA] business case based on a job that needs to be done (or currently gets done in a cumbersome way) and make a business case specific to that job that needs doing." Oracle ACE Director Floyd Teter (tags: oracle otn oracleace soa architect entarch) Jeff Davies: Tidbits of goodness - Podcasts, REST, JSON SOA author Jeff Davies shares links and insight into new SCA, BPEL and Oracle Adapters code samples for the Oracle Service Bus 11g release. (tags: oracle otn soa sca bpel) On-Demand Webcast – Drive Efficiency and Reduce Cost with Oracle's Sun SPARC Enterprise Servers Learn how refreshing legacy systems onto the latest server technology can optimize datacenter efficiency and reduce TCO. (tags: oracle webcast sparc servers datacenter)

    Read the article

  • InfiniBand Enabled Diskless PXE Boot

    - by Neeraj Gupta
    When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

    Read the article

  • Microsoft Cloud Day - the ups and downs

    - by Charles Young
    The term ‘cloud’ can sometimes obscure the obvious.  Today’s Microsoft Cloud Day conference in London provided a good example.  Scott Guthrie was halfway through what was an excellent keynote when he lost network connectivity.  This proved very disruptive to his presentation which centred on a series of demonstrations of the Azure platform in action.  Great efforts were made to find a solution, but no quick fix presented itself.  The venue’s IT facilities were dreadful – no WiFi, poor 3G reception (forget 4G…this is the UK) and, unbelievably, no-one on hand from the venue staff to help with infrastructure issues.  Eventually, after an unscheduled break, a solution was found and Scott managed to complete his demonstrations.  Further connectivity issues occurred during the day. I can say that the cause was prosaic.  A member of the venue staff had interfered with a patch board and inadvertently disconnected Scott Guthrie’s machine from the network by pulling out a cable. I need to state the obvious here.  If your PC is disconnected from the network it can’t communicate with other systems.  This could include a machine under someone’s desk, a mail server located down the hall, a server in the local data centre, an Internet search engine or even, heaven forbid, a role running on Azure. Inadvertently disconnecting a PC from the network does not imply a fundamental problem with the cloud or any specific cloud platform.  Some of the tweeted comments I’ve seen today are analogous to suggesting that, if you accidently unplug your microwave from the mains, this suggests some fundamental flaw with the electricity supply to your house.   This is poor reasoning, to say the least. As far as the conference was concerned, the connectivity issue in the keynote, coupled with some later problems in a couple of presentations, served to exaggerate the perception of poor organisation.   Software problems encountered before the conference prevented the correct set-up of a smartphone app intended to convey agenda information to attendees.  Although some information was available via this app, the organisers decided to print out an agenda at the last moment.  Unfortunately, the agenda sheet did not convey enough information, and attendees were forced to approach conference staff through the day to clarify locations of the various presentations. Despite these problems, the overwhelming feedback from conference attendees was very positive.  There was a real sense of excitement in the morning keynote.  For many, this was their first sight of new Azure features delivered in the ‘spring’ release.  The most common reaction I heard was amazement and appreciation that Azure’s new IaaS features deliver built-in template support for several flavours of Linux from day one.  This coupled with open source SDKs and several presentations on Azure’s support for Java, node.js, PHP, MongoDB and Hadoop served to communicate that the Azure platform is maturing quickly.  The new virtual network capabilities also surprised many attendees, and the much improved portal experience went down very well. So, despite some very irritating and disruptive problems, the event served its purpose well, communicating the breadth and depth of the newly upgraded Azure platform.  I enjoyed the day very much.

    Read the article

  • BPM11g Launch - Spotlight on Innovation: A Unified Business Process Management Solution June 17th 2

    - by Jürgen Kress
    Spotlight on Innovation: A Unified Business Process Management Solution Thursday, June 17th, 2010 10 a.m. PT / 18:00 UK / 19:00 CET Presented by: Hasan Rizvi Senior Vice President Oracle Product Management Business Process Management (BPM) is essential for managing change and increasing business visibility, agility, and efficiency. To make the most of BPM, businesses today need to benefit from a new generation of process management solutions. Join Hasan Rizvi, Senior Vice President, Oracle Product Development, as he discusses Oracle’s innovations in the new BPM Suite 11g which will define the next generation of process management. Discover how you can leverage this complete, open, and integrated BPM solution that delivers: Management of all types of processes; including system, human, document, and decision-centric A simplified path to achieving greater business visibility, agility, and efficiency A unified process foundation that simplifies process management with a unified process engine and preintegration of process subsystems User-centric design that simplifies process modeling and interaction Social BPM interaction that provides social computing in the context of BPM to simplify and add richness to collaboration Register today for this live Webcast, another edition in a series introducing the next wave of products in Oracle Fusion Middleware 11g. Did you missed our BPM 11g webcast with Clemens Utschig-Utschig? The recorded version is now available! Here is your feedback: First experience with BPMN 2.0 in Oracle BPM Studio 11g by Hajo Normann Warum Oracle BPM Studio 11g? by Torsten Winterberg Oracle BPM 11g, less is more by Léon Smiers Oracle BPM 11g Integration with ADF and WebCenter Suite by Andrejus Baranovskis Oracle BPM11g available! by Guido Schmutz Listen to more feedback here. If you are working on BPM 11g projects and you would like to attend a hands-on training session, please contact Jürgen Kress. Technorati Tags: BPM,BPMN2.0,SOA,Hasan Rizvi,SOA Partner Community

    Read the article

  • wifi hardware switch doesn't work on a Dell 1018

    - by user42566
    I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

    Read the article

  • Jagran Prakashan Increases Staff Productivity by 40%

    - by Michael Snow
    Jagran Prakashan Increases Staff Productivity by 40%, Launches New IT Projects up to 4x Faster, Enables Mobile Service, and Improves Business Agility Oracle Customer: JPL Location:  Uttar Pradesh, India Industry: Media and Entertainment Employees:  10,000 Annual Revenue:  $100 to $500 Million Jagran Prakashan Ltd. (JPL) is one of India's premier media and communications groups with interests spanning print, advertising, event management, and mobile services for weather, cricket scores, and educational activities. It is a major media enterprise, with 300 locations across 15 states. Its impressive stable of print publications includes Dainik Jagran, the world’s most widely read daily newspaper––with a readership of over 55 million––the country’s leading afternoon dailies, and a range of popular local, bilingual, and English language newspapers. JPL was using multiple systems to manage its business processes. Users were resistant to using multiple passwords for various applications, preferring to continue their less efficient, legacy work practices. In addition, there was no single repository for sharing documents across the organization, such as company announcements or project documents. The company relied on e-mail to disseminate up-to-date company information, often missing employees. It was also time-consuming and difficult for managers to track the status of ongoing assignments or projects because collaboration and document sharing was inefficient and ineffective.With diverse businesses and many geographic locations, JPL needed to implement a centralized and user-friendly enterprise portal to improve document sharing and collaboration and increase business agility. The company implemented Oracle WebCenter Portal to create a dynamic, secure, and intuitive self-service enterprise portal to improve the user experience and increase operating efficiency. It improved staff productivity by 40%, accelerated new IT projects by up to 4x, boosted staff morale, and increased business agility.   Increases Staff Productivity by 40%, Launches New Products up to 2x Faster A word from JPL "With Oracle WebCenter Portal, we gained a dynamic, secure, and intuitive self-service enterprise portal that provided an exceptional user experience and enabled us to engage employees in a collaborative environment. It increased IT staff productivity by 40%, delivered new projects up to 4x faster, and enabled mobile service to improve our business agility.” Sarbani Bhatia, Vice President IT, Jagran Prakashahn Ltd Before implementing Oracle WebCenter Portal, JPL stored project-critical information, such as page planning of daily newspaper editions and the launch of new editions or supplements on individual laptops or in the e-mail system. Collaboration between colleagues was limited to physical meetings, telephone discussions, and e-mail. It was difficult to trace and recover important project documents when a staff member resigned, which represented a significant risk to business continuity. Employees were also averse to multiple passwords and resisted using the systems, affecting staff productivity. With Oracle WebCenter Portal, JPL created a dynamic, secure, and intuitive self-service enterprise portal with business activity streams. The portal allowed users to navigate, discover, and access information, such as advertising rates, requisition approvals, ad-hoc queries, and employee surveys from a single entry point with a single password. Managers can also upload important documents, such as new pricing for advertisers or newspaper distributors, and share them through the information and instruction section in the portal. In addition, managers can now easily track and review timelines for projects online rather than gathering information from meetings and e-mails. The company gained the ability to centrally manage information, ensured business continuity, and improved staff productivity by 40%.“In the media industry, news has a very short shelf life, so speed is crucial. Information delayed is like information lost,” said Sarbani Bhatia, vice president IT, Jagran Prakashahn Ltd. “Thanks to Oracle WebCenter Portal’s contextual collaboration tools, we can provide and share feedback for new project launches, such as career or education supplements, up to 2x faster through discussion forums or knowledge groups. Tasks that previously required four months, we now complete in one month.”In addition, the company can broadcast announcements, flash employee birthdays, and promote important events through the message section on the webpage, instead of using the e-mail system. The company can also conduct opinion polls to gauge employee response to organizational issues and improve management decision-making.“With over 10,000 employees across 300 locations, it is critical for management to hear the voice of employees and develop a cohesive organizational culture. Oracle WebCenter Portal enables employees to engage with business processes and systems in a collaborative environment, providing users with an exceptional experience,” Bhatia said. Enables Mobility Access and Increases Business Agility Newspaper advertisements generate the majority of JPL’s revenue. With most sales staff on the move, the company needed to ensure timely approval of print advertisement discounts for specific clients and meet tight publication deadlines.  By integrating Oracle WebCenter Portal seamlessly with its enterprise resource planning (ERP) system and other applications, such as the organizational mass mailing system, business intelligence, and management information system, JPL embedded its approval workflow processes into the enterprise portal and provided users with an integrated and intuitive interface. About 30% of JPL’s sales staff members now have tablets and receive advertising discount approval from managers while in the field and no longer need to return to the office, which has significantly improved efficiency and increased business agility.“Application mobility was critical for sales representatives in the field to meet stringent auditing requirements for online accountability, particularly for our newspaper advertising business. Staff member satisfaction has improved significantly now that the sales team can use tablets to access the portal––a capability we will extend to smart phones in the second stage of the implementation,” Bhatia said. Accelerates Application Development by up to 4x and Cuts Costs by up to 60% With Oracle WebCenter Portal, users can easily create, modify, and upload information to their personalized webpages without IT assistance. By seamlessly integrating Oracle WebCenter Portal with the payroll database, managers can decide which members of their team can access the page and with whom they will share information, a decision based on role or geographical location. A sales representative selling advertising space for a local language daily newspaper, for example, can upload an updated advertising rate relevant only to that particular publication. Users can also easily adapt to the new platform, thanks to its intuitive design and look, reducing the need for training and lowering resistance to using the system.Using Oracle WebCenter Portal’s out-of-the-box reusable components, such as portal pages and templates, provided JPL’s developers with a comprehensive and flexible user experience platform and increased the speed of application development. In less than five months, JPL developed more than 55 workflows. The IT team accelerated deployment of new applications by up to 4x, as they do not need to install them on individual machines now that they have a web-based environment.   “Previously, we would have spent a whole day deploying a new application for each department or location. With a browser-based environment, we have cut costs by up to 60% by reducing deployment time to zero, because our IT team can roll out a new application from a single point, thanks to Oracle WebCenter Portal,” Bhatia said. Challenges Provide a dynamic, secure, and intuitive self-service enterprise portal to improve staff productivity and ensure business continuity Enable seamless integration with multiple enterprise applications to improve workflow efficiency—including approval of print advertisement discounts—and increase business agility Improve engagement with employees and enable collaboration to enhance management decision-making Accelerate time-to-market for new services, such as new advertising programs Solutions Oracle Product and ServicesOracle WebCenter Portal 11g Increased staff productivity by 40% and enhanced user satisfaction by enabling employees to easily navigate, discover, and access information from a single, self-service enterprise portal without IT assistance Launched new products, such as career or education supplements, up to 2x faster by enabling peer collaboration and incorporating feedback generated through discussion forums, thanks to Oracle WebCenter Portal’s out-of-the-box collaboration tools Accelerated application development up to 4x by enabling developers to optimize reusable components for managing and deploying new applications in a browser-based environment rather than spending one day to install applications for each department, cutting costs by up to 60% Ensured business continuity by enabling managers to easily track and review project timelines online rather than storing important documents on individual laptops or relying on the e-mail system Increased business agility and operational efficiency by seamlessly integrating with the in-house, ERP system and embedding business processes into a single portal Boosted company revenue by enabling sales team members to submit print-advertising discount requests through mobile devices instead of waiting to return to office, ensuring timely approval from managers to meet tight publication deadlines Improved management decision-making by enabling employees to easily share and access feedback through opinion polls or forums, boosting staff morale Introduced the single sign-on capability and enhanced security by enabling managers to decide access level for staff members based on role or geographical location Reduced the need for staff training and minimized user resistance to systems by providing a dynamic and intuitive user experience Why Oracle JPL did not consider other products because the company was already using Oracle Database, Enterprise Edition with Real Application Clusters and had a positive experience with Oracle. JPL chose Oracle WebCenter Portal to ensure no compatibility issues for integration with its existing Oracle products and to take advantage of the experience and support of a reputable vendor to ensure business continuity. “We chose Oracle because we knew we could rely on its support and experience. In addition, Oracle WebCenter Portal’s speed, agility, and mobile access features were a perfect fit for our business requirements,” Bhatia said. Implementation Process JPL launched the enterprise portal to 500 users in the first phase of the project, and plans to extend this to 2,000 users when the portal is fully launched. Oracle partner PricewaterhouseCoopers used Oracle Application Development Framework for the intial set-up, user training and to develop and design sample workflows. JPL’s internal IT staff then took charge of the implementation, bringing it to completion on budget. Partner Oracle PartnerPricewaterhouseCoopers (India)

    Read the article

  • Hill International Wins Oracle Eco-Enterprise Innovation Award

    - by Evelyn Neumayr
    In my last blog entry, I discussed Oracle’s Eco-Enterprise Innovation Award, part of the Oracle Excellence awards. Nominations for this year’s awards are due July 17. These awards are presented to organizations that use Oracle products to reduce their environmental footprint while improving their operational efficiency. One of last year’s winners was Hill International. Engineering News-Record magazine recently ranked Hill as the eighth-largest construction management firm in the United States. Hill International was able to streamline its forecasting and improve its visibility into its construction projects’ productivity and profitability using Oracle Primavera. They also implemented Oracle Hyperion Financial Management to standardize its financial reporting and forecasting processes and support its decision-making. With Oracle, Hill gained visibility into the true productivity of each project and cut its financial reporting cycle time from two weeks to one. The company also used the data generated to support new construction project proposals and determine the profitability of potential projects. Hill International realized significant cost savings and reduced its environmental impact on its US$400 million Comcast Center construction project in Philadelphia by centralizing its data storage, reducing paper usage, and maximizing project efficiency. It also leveraged the increased visibility offered by the Oracle solutions to make more environmentally-sound business decisions regarding on-site demolition, re-use of previous structures, green design of new facilities, procurement, and materials usage. See more about Hill International and the other Eco-Enterprise Innovation award winners here.  

    Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >