Search Results

Search found 35784 results on 1432 pages for 'number format'.

Page 238/1432 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >

• OCZ Vertex 2 not recognized by Ubuntu installer

  - by Zsub

  As I boot into the Ubuntu 10.10 (or 11.04, doesn't matter) live environment or installer, it just refuses to recognise my Vertex 2. It reports the disk as ATA and not supporting smart, shows no serial number, and doesn't list the size correctly. All fdisk tells me is Unable to read /dev/sda (it's the only storage in the PC). I'm now running a temporary install of Windows 7 off of it, which worked like a charm, so where am I going wrong with Ubuntu... Specs: Asus M4N68T-M LE V2 (BIOS 0702, most recent) OCZ Vertex 2 SSD 60 GB Amd Athlon II X4 640 Patriot PSD34G13332 4GB DDR3 ram (two banks) EDIT I installed a second drive, installed Ubuntu on that and booted, it recognised the SSD just fine. I'm now trying to apt-get upgrade the live-environment. I wonder if there is any way to sort of install Ubuntu from Ubuntu (I boot into the working install on the other drive, install it on the SSD and then boot from the SSD). EDIT2 Ok, so that doesn't work. The install detects the SSD, however, it cannot format it. EDIT3 After a fresh boot I can read out SMART-data and even perform a read-benchmark, but if I try to format it, or do a write-bench, it'll crap out and after that it says SMART is not supported. So basically it seems I can't write to the disk, as it will stop working when I do, I will try to run repeated read-benchmarks to see if that has any effect. EDIT4 I'm running several read benchmarks on the drive right now, they give results that are to be expected from an SSD. If the read-benches don't fail, I can use fdisk on the disk, but it is now stuck trying to re-read the partition table after issueing the 'w' command. EDIT5 Parted Magic did recognize the drive and with hdparm -I even could tell me the drive was in a frozen state. I powercycled it (just pull out the plug from the SSD and plug it back in) and it wasn't frozen anymore. After that I could upgrade the firmware on the drive (still using Parted Magic) and format it to Ext4. After I rebooted into the Ubuntu installer, it wouldn't get recognized and hdparm didn't want to talk to it saying HDIO_DRIVE_CMD(identify) failed: Invalid exchange. EDIT6 For some reason if I enable one of the RAID controllers (the one the SSD is connected to, obviously) Ubuntu will let me format it, mount it and write to it. The installer also recognizes it. However if the raid controller is enabled but no array is defined the motherboard can't boot from it :(

  Read the article

• List full timestamps of files in a tarball

  - by Mechanical snail

  I have a large tar archive and want to see the exact (nanosecond) timestamps that are stored for each file in the archive. In case it's relevant, the tarball is in POSIX-2001 format (tar --format=posix). tar --list --verbose displays the timestamps rounded off to the minute. For comparison, ls --full-time does what I want, but I'd rather not have to extract everything first because it's huge. For my purposes, command-line and GUI tools are both fine.

  Read the article

• Can an image based backup potentially corrupt data?

  - by ServerAdminGuy45

  I'm considering doing image based backups (Acronis) on production Windows systems during non-peak hours. I'm just wondering if they can potentially lead to application data corruption. Lets say that I have a database that is getting hit pretty hard. Could I potentially have the beginning blocks of the database be commit ed to the image, data inserted into the db (which changes the beginning blocks of the DB on the server but not the image), then the blocks of data committed to the image (leading to an inconsistent state). Here's an example of what I'm trying to illustrate. Imagine a simple data structure which has a number in the front which represents the number of "a"s in a file. The number and data are delimited by a "-". For example: 4-ajjjjjjjajuuuuuuuaoffffa If an "a" is changed, the datastructure resets the number in the begining of the file such as: 3-ajjjjjjjajuuuuuuuboffffa I assume acronis writes block by block being a straight up image so here is what i'm invisioning happening with my database t0: 4-ajjjjjjjajuuuuuuuaoffffa ^pointer is here t1: 4-ajjjjjjjajuuuuuuuaoffffa ^pointer is here (all data before this is comitted to the image) t2: 4-ajjjjjjjajuuuuuuuboffffa ^pointer is here (all data before this is comitted to the image) Also notice how one of the "a"s change to a b. There are only 3 "a"s now t3: 4-ajjjjjjjajuuuuuuuboffffa ^pointer is here (all data before this is comitted to the image) The final image now reads "4-ajjjjjjjajuuuuuuuboffffa", while the true data is "3-ajjjjjjjajuuuuuuuboffffa" leading to a corrupt "database". Basically changes further down the blockchain could be reflected in the image, while important header and synchronization could already be committed. The out of date header information doesn't accurately reflect the structure of the blocks to come.

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• Pages '09 reverts to a specific printer after choosing "Any Printer"

  - by Matthew Rankin

  When I select Any Printer in the Format For: drop down box for a Pages '09 document, the next time I reopen the document it reverts to formatting for the specific printer that was originally selected. Why isn't the Format For: selection persistent? I know for certain that this problem exists on documents that I originally created in an earlier version of Pages. I have not yet confirmed if it also happens in documents originally created in Pages '09.

  Read the article

• Unable to open an ra_local session to URL

  - by AntonAL

  I have repository on my Windows machine, using VisualSVN + TortoiseSVN I want to use this repositories on my Mac with Versions.app I create a new Repository bookmark, choose a repository directory and after clicking "Create", get following error: Unable to open an ra_local session to URL Unable to open repository 'file://localhost/Path/to/my/repositories/MyRepo' Expected FS format '2'; found format '4' I can surf through the repository, using svn ls file://localhost/Path/to/my/repositories/MyRepo Also, when i create local repository, using Versions.app, the bookmark is created well and i can work with it Help!

  Read the article

• Suggestions for sharing and using data between Ubuntu and Windows 7 dual boot

  - by wizjany

  Note: TL;DR, scroll to bottom for summary. I recently set up my computer for a dual boot between Ubuntu 9.10 and Windows 7. My current drive setup is as follows. | A1 | A2 | | B1 | B2 | B3 | A1: 100 mb, windows 7 "System Reserved" boot partition A2: 230 gb, data section, this one needs to be shared between the operating systems B1: 125 gb, windows 7 OS B2: 123 gb, ubuntu OS B3: 2gb, linux swap space Pretty much i want to have my documents, music, pictures, videos, etc accessible from both operating systems. My first attempt involved making the data (a2) partition NTFS, and moving my home folder from ubuntu to the data partition. However, as I read NTFS does not work nice with permission, and it messed up my home folder. My next idea is one of the following: 1) format the data partition to ext2/3/4 and move my home folder from linux there, and get a driver to read ext partitions in windows 7. The problem with that is that most of the ext drivers/software are not compatible with windows 7 or do not integrate with windows explorer (I really don't want to open a separate software window just to access my data, plus it's probably not compatible with other software.) http://www.fs-driver.org/ looks promising, but I'm not sure how it works with ext4 and windows 7 (not officially supported, when trying in vista compatibility mode, it tells me I need to format the ext drive to use it). My next idea, 2) keep the home folder in ubuntu where it is, but create symlinks for the Documents, Music, etc folders to an NTFS formatted Data (A2) partition, and add those locations to the windows 7 libraries. I'm not totally sure how the permissions would work out, but it should be fine since it's only the documents, music, etc and not the important config files in the rest of /home/user/. Correct me if I'm wrong. Currently, symlinks is my best idea, although i'm not sure how it will work. Any suggestions, additions to my ideas, links, pointers, whatever would be greatly appreciated. Even if it means i should reformat both my drives and repartition (2 250gb drives if you want to suggest a setup for that), I won't be too opposed if that's the best suggestion (I've gone through the format/install/format/reinstall process 5 times over the past 3 days, once more won't hurt me). TL;DR, summary: I have two hard drives. One is partitioned for Ubuntu and Windows 7, the second one I want accessible to both operating systems to store documents, music, pictures, videos, etc. Suggestions on how to set up the data drive please =) P.S. bonus if I can get an apache server document root folder working between the two OS's as well (permissions could become very complicated, so don't worry too much about that) P.P.S. Related question, but data viewing is one way: http://superuser.com/questions/84586/partition-scheme-and-size-for-dual-boot-windows-7-and-ubuntu-9-10-with-separate-p

  Read the article

• Best Processor for MediaSmart Server?

  - by Kent Boogaart

  I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

  Read the article

• Automate Excel Text Import Wizard?

  - by Dave Mackey

  I receive files on occasion in a fixed width format. I need to import them into Excel but Excel doesn't perfectly pick up the columns. I can do it manually each time with the Text Import Wizard, but I'm wondering if there is a way to create a "text import template" or something similar - since these files are always the same format.

  Read the article

• Subscribe to YouTube channel in iTunes

  - by ejunker

  What is the best way to subscribe to a YouTube channel and have it show up in iTunes as a podcast? I want iTunes to automatically download the videos in MP4 format or download them in FLV and convert them to MP4 in iPod format. I have used these services in the past but they don't seem to be working anymore: RSSHandler Youtube Podcaster

  Read the article

• NTFS5 file system in Windows XP

  - by Sauron

  How can I get NTFS5 file system in XP? When I install XP to my PC it shows only format using FAT32 and format using NTFS. Which version of XP contains NTFS5?

  Read the article

• Writing ~ 630 MBs of MP3 to a Regular Audio CD

  - by Maxim Z.

  I have around 630 MBs of an MP3 podcast that I want to burn to a CD so that a friend can listen to it while driving. I understand that MP3 is very different from the normal audio CD format, but would it be possible to fit this amount onto a typical 700mb CD in the correct (non-MP3) format? I don't really care if some quality is lost. Thanks in advance!

  Read the article

• voice recording software for Windows laptop?

  - by George2

  Hello guys, I want to record voice using the built-in Microphone of my laptop, the OS is Windows 7. The built-in recorder of Windows could only record into wav format, and I want to record in mp3 or other compact format for a long time -- around 10 hours. Record only voice is fine. Any recommendations? Better free software and easy to use. Thanks in advance!

  Read the article

• Managing multiple Apache proxies simultaneously (mod_proxy_balancer)

  - by Hank

  The frontend of my web application is formed by currently two Apache reverse proxies, using mod_proxy_balancer to distribute traffic over a number of backend application servers. Both frontend reverse proxies, running on separate hosts, are accessible from the internet. DNS round robin distributes traffic over both. In the future, the number of reverse proxies is likely to grow, since the webapplication is very bandwidth-heavy. My question is: how do I keep the state of both reverse balancers / proxies in sync? For example, for maintenance purposes, I might want to reduce the load on one of the backend appservers. Currently I can do that by accessing the Balancer-Manager web form on each proxy, and change the distribution rules. But I have to do that on each proxy manually and make sure I enter the same stuff. Is it possible to "link" multiple instances of mod_proxy_balancer? Or is there a tool out there that connects to a number of instances, and updates all with the same information? Update: The tool should retrieve the runtime status and make runtime changes, just like the existing Balancer-Manager, only for a number of proxies - not just for one. Modification of configuration files is not what I'm interested in (as there are plenty tools for that).

  Read the article

• Windows Media Player - always show Current Time/Total Time

  - by Siim K

  I'm using Windows Media Player 12 on Windows 7. When I open a video file then it by default only shows the current position (time). If I click on it once then it changes to format Current Time / Total Time Is there any way to make this format permanent (registry hack/some setting I have not noticed)? Right now every time I close WMP and open another file it's back to the default (only current time) setting.

  Read the article

• Excel - convert groupped data into PivotTable - is it possible?

  - by zmische

  I have report in Excel format (Excel 2007) from Accountant department - and it has Groupping by Rows. + Client 1 300$ (group Bills by Client) |-- BIll 1 100$ |-- Bill 2 200$ So in Excel It looks like this in plain rows format (If I ungroup those rows): 1 Client1 300$ 2 Bill1 100$ 3 Bill2 200$ 1,2,3 - row numbers. So I cant Pivot these data to get Client-by-Bill-SUm report, because rows with Client Name are not Connected (that is necessary for Pivoting info by Client, Bills) with Bills rows after UnGroupping.

  Read the article

• Reliable applicance for routing IT emergency calls (SIP and ISDN)

  - by chiborg

  We have a fairly big IT installation and our IT staff needs to be reachable 24/7. At the moment we have the following setup for "emergency" calls to our IT staff on our main Asterisk box: An incoming emergency number (connected via SIP trunk and a BRI card in case the SIP trunk goes down). When the number is called during the office hours, all the SIP phones of the IT staff are called simultaneously. When the number is called out of office hours interface, a list of mobile phone numbers is called, one after another until someone picks up. The list can be changed by the IT staff via command line script. The setup works well, but the Asterisk is heavily used in a call center, has experienced some outages and misconfigurations, each of them bringing down the IT emergency number. So we'd like to put the IT emergency call functionality on a separate device. This does not need to be a big server, it even does not need to be Asterisk, it only has one purpose and should do it reliably. It should be very low-maintenance. Any suggestions for hard- and software?

  Read the article

• rsync general question

  - by CaptnLenz

  I'm trying to use rsync. At first, everything looks very good: rsync -Pniahv -e ssh /home/xxx/Videos/ [email protected]:"/shares/Public/Shared\ Videos/" --stats ... <f+++++++++ Serien/blah.avi <f+++++++++ Serien/blah S01E01 <f+++++++++ Serien/blah - S01E02 <f+++++++++ Serien/blah - S01E03 <f+++++++++ Serien/blah - S01E04 <f+++++++++ Serien/blah - S01E05 <f+++++++++ Serien/blah - S01E06 <f+++++++++ Serien/blah - S01E07 ... Number of files: 232 Number of files transferred: 223 Total file size: 118.24G bytes Total transferred file size: 117.51G bytes Literal data: 0 bytes Matched data: 0 bytes File list size: 9.46K File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 10.18K Total bytes received: 712 After that, i copied some of the files manually and runned rsync again in dry mode: rsync -Pniahv -e ssh /home/xxx/Videos/ [email protected]:"/shares/Public/Shared\ Videos/" --stats ... <f..tpo.... Serien/blah.avi <f..tpo.... Serien/blah S01E01 <f..tpo.... Serien/blah - S01E02 <f..tpo.... Serien/blah - S01E03 <f..tpo.... Serien/blah - S01E04 <f..tpo.... Serien/blah - S01E05 <f..tpo.... Serien/blah - S01E06 <f..tpo.... Serien/blah - S01E07 ... Number of files: 232 Number of files transferred: 223 Total file size: 118.24G bytes Total transferred file size: 117.51G bytes Literal data: 0 bytes Matched data: 0 bytes File list size: 9.46K File list generation time: 0.001 seconds File list transfer time: 0.000 seconds Total bytes sent: 10.18K Total bytes received: 712 Why hasn't changed something in the --stats, although only the permissions and the timestamp have to be updated and not the full files need to be copied?

  Read the article

• Proper Imaging Procedures to Restore and Deploy Image with Separate System Reserved Partition

  - by alharaka

  UPDATE: As per my experience here, no one responded. If I do not hear back from TechNet forum members about it, I will post a bounty here, if it makes a difference. I have banged my head against a wall for what seems like all week. I am going to explain my simple procedure, and how none of it, absolutely none, seems to work afterword despite few alternatives and everyone on the internet telling assuming this is how to do it. Diskpart Commands to Create FS Structure REM Select the disk targeted for deployment. REM REM NOTE: Usually disk 0, but drive failure can make it external USB REM media. This will erase the drive regardless! select disk 0 REM Remove previous formatting. clean REM Create System Reserved partition bootloader and files. create partition primary size=100 REM Format the volume format fs=ntfs label="System Reserved" quick override noerr REM Assign the System Reserved partition the D: mount for now assign letter=C REM The main system partition, size not specified to occupy whole drive. create partition primary REM Format the volume format fs=ntfs quick override noerr REM Assign the OS partition the D: mount for now assign letter=D REM Make this the active/bootable partition. sel disk 0 sel partition 1 active REM Close out the diskpart session. exit Now, I thought this was madness, but it turns out the System Reserved partition and standard "System Partition" (C:, commonly both the boot and system volumes where you find the Windows directory AND the bootmgr/ntldr hardware files, this is where Windows 7 diverges) as mounted in the Windows PE session where I run these commands do not matter. See reference here. Since this needs to be BitLocker-ready, enter this crappy System Reserved partition that is separate 100MB of awesome that goes before the regular boot volume. I do this, then I proceed to the next step. Deploy System Reserved and Normal System Images REM C is still the "System Reserved Partition", and the image is just like it sounds. imagex /apply G:\images\systemreserved.wim 1 C: REM D is now what will be the C: system partition on reboot, supposedly. imagex /apply G:\images\testimage.wim 1 D: Reboot the system Now, the images I just captured should look good. This is not even sysprepped, but reapplying the same fscking image I prepared on the same reference workstation hours before. Problem is I get 0xc000000e could not detect the accessible boot device \Windows\system32\winload.exe or different kinds of nonsense revolving around being able to find the boot volume with all the right files. I try different variations of things, now none of them work. I tried repairs with bcdboot, with a fresh System Reserved partition or not, bootrec, and maually editing the damn BCD store with bcdedit. I tried finalizing the above process with and without bootsect /nt60 C: /force. I need to wrap up and automate this procedure. What am I doing wrong that does not make the image happy, but really just miserable.

  Read the article

• Can a faulty battery cause a laptop to crash?

  - by Paul Johnson

  After replacing a blown out motherboard, my Toshiba Satellite C600 is still malfunctioning lately: BSODs. Distorted graphics, and freezes. Sudden shutdowns. After removing the battery and doing a re-format the laptop works perfectly (I should mention the problems continued before removing the battery after the re-format). I haven't seen a fault while solely running on A/C power for two days. Could the problem be a faulty battery?

  Read the article

• The MySQL service is in the status "starting" on windows

  - by andres descalzo

  I have several months working to "MySQL-5-1-47" on windows 2003. When I restarted, the service "MySQL" stay in this state "starting". The only way to raise the service was running the program directly: C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld This is the MySQL error log 100906 16:07:29 [Note] Event Scheduler: Purging the queue. 0 events 100906 16:07:32 InnoDB: Starting shutdown... 100906 16:07:37 [Note] Plugin 'FEDERATED' is disabled. 100906 16:07:38 InnoDB: Shutdown completed; log sequence number 0 44233 100906 16:07:38 [Note] mysqld: Shutdown complete 100906 16:07:39 InnoDB: Started; log sequence number 0 44233 100906 16:17:21 [Note] Plugin 'FEDERATED' is disabled. 100906 16:17:22 InnoDB: Started; log sequence number 0 44233 100906 16:22:01 [Note] Plugin 'FEDERATED' is disabled. 100906 16:22:02 InnoDB: Started; log sequence number 0 44233 100906 16:22:02 [Note] Event Scheduler: Loaded 0 events 100906 16:22:02 [Note] C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld.exe: ready for connections. Version: '5.1.47-community' socket: '' port: 3306 MySQL Community Server (GPL) The last lines are after loading the program from the shell Thank.

  Read the article

• Powershell Exchange script returning inconsistent results - PS weirdness

  - by Ian

  Maybe someone can shed some light on a bit of Powershell weirdness I've come across and can't explain. This PS script returns a list of exchange databases, their sizes and the number of mailboxes in each one: Get-MailboxDatabase | Select Server, StorageGroupName, Name, @{Name="Size (GB)";Expression={$objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$"+ $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1048576KB; [math]::round($size, 2)}}, @{Name="Size (MB)";Expression={$objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$"+ $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1024KB; [math]::round($size, 2)}}, @{Name="No. Of Mbx";expression={(Get-Mailbox -Database $_.Identity | Measure-Object).Count}} | Format-table –AutoSize If I add a simple 'sort name' before the 'format-table' my resulting table contains blanks where the database sizes and number of mailboxes should appear (not zeros, blank empty space).... but only in some rows, not all rows. Some rows contain numbers! If I put the '|sort name| ' after the initial 'get-mailboxdatabase' it works fine. Whats even weirder is if I do the following: Execute the above command Add the sort before format-table Execute the new command Execute the initial command again What I see is different amounts in each of the three cases - all of which are incorrect. Yet 1 and 3 are the same command and the only difference with 2 is a sort. 1 and 3 should, at a minimum, return the same results. I get blanks where I should have MBs If I add the sort after the get-mailboxdatabase, it always returns identical results (as it should). Can anyone suggest an explanation as to what may be going on? If its of any help in reading the expression, I've reformatted it here to make it a bit more readable: Get-MailboxDatabase | Select Server, StorageGroupName, Name, @{Name="Size (GB)";Expression={ $objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$" + $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1048576KB; [math]::round($size, 2) }}, @{Name="Size (MB)";Expression={ $objitem = (Get-MailboxDatabase $_.Identity); $path = "`\`\" + $objitem.server + "`\" + $objItem.EdbFilePath.DriveName.Remove(1).ToString() + "$" + $objItem.EdbFilePath.PathName.Remove(0,2); $size = ((Get-ChildItem $path).length)/1024KB; [math]::round($size, 2) }}, @{Name="No. Of Mbx";expression={ (Get-Mailbox -Database $_.Identity | Measure-Object).Count }} | Format-table –AutoSize

  Read the article

• Decyphering Seagate drive model numbers?

  - by Stefan Lasiewski

  I'm comparing Seagate's Enterprise and Desktop drives for a variety of old and new servers. These servers come from different generations, so options like size (73GB, 2TB) and interface (SATA vs SAS 3.0Gbps vs SAS 6Gbps vs SCSI Ultra320) are widely variable. I'm trying to compare the sizes, speeds and interfaces, but I'm getting thrown off by different models. Also, their website is not the best. Does anyone know of a documented explanation of the Seagate model numbers? And is there a single spreadsheet which compares the features for all drives (or all 'Enterprise' drives?). Seagate drives have model numbers like this: Model ST3600057SS 6-Gb/s SAS 600 GB None at Cheetah® 15K Hard Drives Model ST373455LW Ultra320 SCSI 73.4 GB 68-Pin LW at Cheetah® 15K Hard Drives Model ST32000644NS SATA 3Gb/s 2 TB None at Constellation™ ES Hard Drives Model ST973452SS 6-Gb/s SAS 73 GB None Savvio® 15K Hard Drives Model ST9200011FS SATA 3Gb/s 200 GB Pulsar™ Solid State Drives I understand the model numbers read something like this: ST - SOMETHING1 - SIZE - SOMETHING2 - INTERFACE Where the fields mean something like this: ST : For 'Seagate'? 'Seagate Technoligies'? SOMETHING1 - This field has number, but I'm not sure what that represents. SIZE - Size in Gigabytes. This is a number like '73' or '300' or '2000' SOMETHING2 - This field also has a number, but I'm not sure what it means. INTERFACE - This field seems to indicate the Interface. 'SS' means SAS, 'FC' means Fibre Channel, but I don't see how to distinguish between 6Gbps SAS and 3Gbps SAS, or different SATA or FC speeds. I don't see a field which indicates the RPM (15K , 10K, 7.2K) etc. Is this part of the model number?

  Read the article

• Extract music files from a Audio CD [closed]

  - by Jatin

  Possible Duplicate: What good, free audio CD ripping/extraction tools exist for Windows, and supporting multiple formats? I have an audio cd, which has audio files with the file format as .cda ( CD Audio Track ). Each one of these files have a size of 1 KB each, and the rest of the CD has nothing else. Is there a way that I can get the audio files from the CD and then convert it into mp3 format and then play it in any other devices as I like.

  Read the article

• Logging Redirect Location in Apache

  - by matthew

  Using the standard "Combined" log format, when Apache returns a 301 response it logs it in the access log, which is good, but it only logs the response code. It doesn't log the location to which the client is being directed. What argument do I need to add to the CustomLog format in order to get it to log this information? It wasn't obvious to me from the documentation.

  Read the article

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245  | Next Page >