static ip address - Page 238

Typesafe fire-and-forget asynchronous delegate invocation in C#

- by LBushkin

I recently found myself needing a typesafe "fire-and-forget" mechanism for running code asynchronously. Ideally, what I would want to do is something like: var myAction = (Action)(() => Console.WriteLine("yada yada")); myAction.FireAndForget(); // async invocation Unfortunately, the obvious choice of calling BeginInvoke() without a corresponding EndInvoke() does not work - it results in a slow resource leak (since the asyn state is held by the runtime and never released ... it's expecting an eventual call to EndInvoke(). I also can't run the code on the .NET thread pool because it may take a very long time to complete (it's advised to only run relatively short-lived code on the thread pool) - this makes it impossible to use the ThreadPool.QueueUserWorkItem(). Initially, I only needed this behavior for methods whose signature matches Action, Action<...>, or Func<...>. So I put together a set of extension methods (see listing below) that let me do this without running into the resource leak. There are overloads for each version of Action/Func. Unfortunately, I now want to port this code to .NET 4 where the number of generic parameters on Action and Func have been increased substantially. Before I write a T4 script to generate these, I was also hoping to find a simpler more elegant way to do this. Any ideas are welcome. public static class AsyncExt { public static void FireAndForget( this Action action ) { action.BeginInvoke(OnActionCompleted, action); } public static void FireAndForget<T1>( this Action<T1> action, T1 arg1 ) { action.BeginInvoke(arg1, OnActionCompleted<T1>, action); } public static void FireAndForget<T1,T2>( this Action<T1,T2> action, T1 arg1, T2 arg2 ) { action.BeginInvoke(arg1, arg2, OnActionCompleted<T1, T2>, action); } public static void FireAndForget<TResult>(this Func<TResult> func, TResult arg1) { func.BeginInvoke(OnFuncCompleted<TResult>, func); } public static void FireAndForget<T1,TResult>(this Func<T1, TResult> action, T1 arg1) { action.BeginInvoke(arg1, OnFuncCompleted<T1,TResult>, action); } // more overloads of FireAndForget<..>() for Action<..> and Func<..> private static void OnActionCompleted( IAsyncResult result ) { var action = (Action)result.AsyncState; action.EndInvoke(result); } private static void OnActionCompleted<T1>( IAsyncResult result ) { var action = (Action<T1>)result.AsyncState; action.EndInvoke( result ); } private static void OnActionCompleted<T1,T2>(IAsyncResult result) { var action = (Action<T1,T2>)result.AsyncState; action.EndInvoke(result); } private static void OnFuncCompleted<TResult>( IAsyncResult result ) { var func = (Func<TResult>)result.AsyncState; func.EndInvoke( result ); } private static void OnFuncCompleted<T1,TResult>(IAsyncResult result) { var func = (Func<T1, TResult>)result.AsyncState; func.EndInvoke(result); } // more overloads of OnActionCompleted<> and OnFuncCompleted<> }

Read the article

BadPaddingException in Android encrypt

- by DarthRoman

Hi everyone, I am making an Android application, and I want to encrypt a String before sending it to a DataBase, and encrytpion is correct. The problem is when I am going to decrypt the String, because I get a BadPaddingException and I have no idea where the problem is. Here is the code: public final static String HEX = "36A52C8FB7DF9A3F"; public static String encrypt(String seed, String cleartext) throws Exception { byte[] rawKey = getRawKey(seed.getBytes()); byte[] result = encrypt(rawKey, cleartext.getBytes()); return toHex(result); } public static String decrypt(String seed, String encrypted) throws Exception { byte[] rawKey = getRawKey(seed.getBytes()); byte[] enc = toByte(encrypted); byte[] result = decrypt(rawKey, enc); return new String(result); } public static String toHex(String txt) { return toHex(txt.getBytes()); } public static String fromHex(String hex) { return new String(toByte(hex)); } public static byte[] toByte(String hexString) { int len = hexString.length()/2; byte[] result = new byte[len]; for (int i = 0; i < len; i++) result[i] = Integer.valueOf(hexString.substring(2*i, 2*i+2), 16).byteValue(); return result; } public static String toHex(byte[] buf) { if (buf == null) return ""; StringBuffer result = new StringBuffer(2*buf.length); for (int i = 0; i < buf.length; i++) { appendHex(result, buf[i]); } return result.toString(); } private static byte[] getRawKey(byte[] seed) throws Exception { KeyGenerator kgen = KeyGenerator.getInstance("AES"); SecureRandom sr = SecureRandom.getInstance("SHA1PRNG"); sr.setSeed(seed); kgen.init(128, sr); // 192 and 256 bits may not be available SecretKey skey = kgen.generateKey(); byte[] raw = skey.getEncoded(); return raw; } private static byte[] encrypt(byte[] raw, byte[] clear) throws Exception { SecretKeySpec skeySpec = new SecretKeySpec(raw, "AES"); Cipher cipher = Cipher.getInstance("AES"); cipher.init(Cipher.ENCRYPT_MODE, skeySpec); byte[] encrypted = cipher.doFinal(clear); return encrypted; } private static byte[] decrypt(byte[] raw, byte[] encrypted) throws Exception { SecretKeySpec skeySpec = new SecretKeySpec(raw, "AES"); Cipher cipher = Cipher.getInstance("AES"); cipher.init(Cipher.DECRYPT_MODE, skeySpec); byte[] decrypted = cipher.doFinal(encrypted); return decrypted; } private static void appendHex(StringBuffer sb, byte b) { sb.append(HEX.charAt((b>>4)&0x0f)).append(HEX.charAt(b&0x0f)); } I encrypt and decrypt with this code: String encrypted = encrypt(HEX, "some text"); String decrypted = decrypt(HEX, encrypted); Can anyone help me please? Thank you very much!!

Read the article

Sqlite returns error

- by ruruma

I'm trying to implement loading data from database and put it into different views. But log cat returns error, that it cannot find "_id" column. Can somebody help me with this? SqlHelper Code public class FiboSqlHelper extends SQLiteOpenHelper { public static final String TABLE_FILMDB = "FiboFilmTop250"; public static final String COLUMN_ID = "_id"; private static final String DATABASE_NAME = "FiboFilmDb250.sqlite"; private static final int DATABASE_VERSION = 1; public static final String COLUMN_TITLE = "Title"; public static final String COLUMN_RATING = "Rating"; public static final String COLUMN_GENRE = "Genre"; public static final String COLUMN_TIME = "Time"; public static final String COLUMN_PREMDATE = "PremDate"; public static final String COLUMN_PLOT = "Plot"; private static final String DATABASE_CREATE = "create table "+TABLE_FILMDB+"("+COLUMN_ID +" integer primary key autoincrement, " +COLUMN_TITLE+" text not null "+COLUMN_RATING+" text not null "+COLUMN_GENRE+" text not null "+COLUMN_TIME+" text not null "+COLUMN_PREMDATE+" text not null "+COLUMN_PLOT+" "+"text not null)"; public FiboSqlHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); // TODO Auto-generated constructor stub } @Override public void onCreate(SQLiteDatabase db) { // TODO Auto-generated method stub db.execSQL(DATABASE_CREATE); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { // TODO Auto-generated method stub Log.w(FiboSqlHelper.class.getName(), "Upgrading database from version " + oldVersion + " to " + newVersion + ", which will destroy all old data"); db.execSQL("DROP TABLE IF EXISTS " + TABLE_FILMDB); onCreate(db); } }` SqlAdapterCode: public class FiboSqlAdapter { private SQLiteDatabase database; private FiboSqlHelper dbHelper; private String[] allColumns = {FiboSqlHelper.COLUMN_ID, FiboSqlHelper.COLUMN_TITLE, FiboSqlHelper.COLUMN_GENRE, FiboSqlHelper.COLUMN_PREMDATE, FiboSqlHelper.COLUMN_TIME, FiboSqlHelper.COLUMN_PLOT}; public FiboSqlAdapter (Context context){ dbHelper = new FiboSqlHelper(context); } public void open() throws SQLException { database = dbHelper.getWritableDatabase(); } public void close(){ dbHelper.close(); } public List<FilmDataEntity> getAllFilmData(){ List<FilmDataEntity> fDatas = new ArrayList<FilmDataEntity>(); Cursor cursor = database.query(FiboSqlHelper.TABLE_FILMDB, allColumns, null,null,null,null,null); cursor.moveToFirst(); while(!cursor.isAfterLast()){ FilmDataEntity fData = cursorToData(cursor); fDatas.add(fData); cursor.moveToNext(); } cursor.close(); return fDatas; } private FilmDataEntity cursorToData(Cursor cursor){ FilmDataEntity fData = new FilmDataEntity(); fData.setId(cursor.getLong(1)); fData.setTitle(cursor.getString(2)); fData.setRating(cursor.getString(6)); fData.setGenre(cursor.getString(4)); fData.setPremDate(cursor.getString(5)); fData.setShortcut(cursor.getString(8)); return fData; }} DataEntity: ` public class FilmDataEntity { private long id; private String title; private String rating; private String genre; private String premDate; private String shortcut; public String getShortcut() { return shortcut; } public void setShortcut(String shortcut) { this.shortcut = shortcut; } public String getGenre() { return genre; } public void setGenre(String genre) { this.genre = genre; } public String getPremDate() { return premDate; } public void setPremDate(String premDate) { this.premDate = premDate; } public String getTitle() { return title; } public void setTitle(String title) { this.title = title; } public String getRating() { return rating; } public void setRating(String rating) { this.rating = rating; } public long getId() { return id; } public void setId(long id) { this.id = id; } } Part from main activity: `List<FilmDataEntity> fE1; sqA = new FiboSqlAdapter(this); sqA.open(); fE1 = sqA.getAllFilmData(); `

Read the article

How to use Bonjour?

- by Roman

First, what exactly Bonjour does (pleas read my guesses written bellow)? Here I found out that Bonjour enables automatic discovery of computers, devices, and services on IP networks. But I thought that it not only "discovers devices on IP network" it also creates an IP network by assigning IP addresses to devices where Bonjour is running. Am I right? And I still miss the essence. Does it work in the following way? First I connect devices (for example laptops) physically so that they potentially can communicate with each other. Then, let say, on some laptops I have Bonjour running and then, as a consequence, these laptops assign IP addresses to them self in automatic way. So, laptops (where Bonjour is running) build an IP network. Does it work in this way? Or may be a computer running Bonjour is not considered as a service and it does not broadcast itself just because Bonjour is running on this computer. I mean that the applications running on the computers need to use Bonjour to broadcast themself. So, it is applications that broadcast themself (not computers) and it is not done automatically (application needs to broadcast themself explicitly). Is it right? How exactly my application can broadcast itself? Can I use command line to register an service (so that all applications using Bonjour knows that a new service appeared)? Further, I would like to have an application which use the IP network created by Bonjour. For that my application needs to know which devices/services are present in the network. In more details, my application needs to have a list of services. Each service in the list should have a name, the IP address where it is running and the port which is used by the application. Can Bonjour provide this information in some way? If it is the case, how exactly it works. How my program can get this information from Bonjour? Can my program read some file created by Bonjour and containing the above mentioned information? Can I use some commands in command line to retrieve this information? I have a special interest in accessing the information about services from files, environment variables or commands in command line. These options seems to me to be the simplest! Since in these case I do not need to use any additional libraries to communicate with Bonjour from a particular programming language. P.S. Pleas ask questions if something is not clear in my question. I will try to formulate my question in a more clear way. P.P.S. I use Windows 7. ADDED: I plan to write my applications in PHP. Every computer should run a Apache web server. And I want to use Bonjour to help computer discover each other (computers are working in a local network).

Read the article

Linux pptp client stops working after several hours

- by Aron Rotteveel

Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

Read the article

Initial Cisco ASA 5510 Config

- by Brendan ODonnell

Fair warning, I'm a but of a noob so please bear with me. I'm trying to set up a new ASA 5510. I have a pretty simple set up with one /24 on the inside NATed to a DHCP address on the outside. Everything on the inside works and I can ping the outside interface from external devices. No matter what I do I can't get anything internal to route across the border to the outside and back. To try and eliminate ACL issues as a possibility I added permit any any rules to the incoming access lists on the inside and outside interfaces. I'd appreciate any help I can get. Here's the sh run. : Saved : ASA Version 8.4(3) ! hostname gateway domain-name xxx.local enable password xxx encrypted passwd xxx encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/1 nameif inside security-level 100 ip address 10.x.x.x 255.255.255.0 ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 shutdown no nameif no security-level no ip address ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 10.x.x.x domain-name xxx.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-network subnet 10.x.x.x 255.255.255.0 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list outside_access_in extended permit ip any any access-list inside_access_in extended permit ip any any pager lines 24 logging enable logging buffered informational logging asdm informational mtu management 1500 mtu inside 1500 mtu outside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside icmp permit any outside no asdm history enable arp timeout 14400 ! object network inside-network nat (any,outside) dynamic interface access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy user-identity default-domain LOCAL aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 192.168.1.0 255.255.255.0 management http 10.x.x.x 255.255.255.0 inside http authentication-certificate management http authentication-certificate inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart telnet timeout 5 ssh 192.168.1.0 255.255.255.0 management ssh 10.x.x.x 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 dhcp-client client-id interface outside dhcpd address 192.168.1.2-192.168.1.254 management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn username xxx password xxx encrypted ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:fe19874e18fe7107948eb0ada6240bc2 : end no asdm history enable

Read the article

mod_mono 'Service Temporarily Unavailable' issue

- by Charlie Somerville

I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

Read the article

Inconsistent file downloads of (what should be) the same file

- by Austin A.

I'm working on a system that archives large collections of timetstamped images. Part of the system deals with saving an image to a growing .zip file. This morning I noticed that the log system said that an image was successfully downloaded and placed in the zip file, but when I downloaded the .zip (from an apache alias running on our server), the images didn't match the log. For example, although the log said that camera 3484 captured on January 17, 2011, when I download from the apache alias, the downloaded zip file only contains images up to January 14. So, I sshed onto the server, and unzipped the file in its own directory, and that zip file has images from January 14 to today (January 17). What strikes me as odd is that this should be the exact same file as the one I downloaded from the apache alias. Other experiments: I scp-ed the file from the server to my local machine, and the zip file has the newer images. But when I use an SCP client (in this case, Fugu for OSX), I get the zip file for the older images. In short: unzipping a file on the server or after downloading through scp or after downloading through wget gives one zip file, but unzipping a file from Chrome, Firefox, or SCP client gives a different zip file, when they should be exactly the same. Unzipping on the server... [user@server ~]$ cd /export1/amos/images/2011/84/3484/00003484/ [user@server 00003484]$ ls -la total 6180 drwxr-sr-x 2 user groupname 24 Jan 17 11:20 . drwxr-sr-x 4 user groupname 36 Jan 11 19:58 .. -rw-r--r-- 1 user groupname 6309980 Jan 17 12:05 2011.01.zip [user@server 00003484]$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg extracting: 20110114_143554.jpg replace 20110114_143554.jpg? [y]es, [n]o, [A]ll, [N]one, [r]ename: y extracting: 20110114_143554.jpg extracting: 20110114_153458.jpg (...bunch of files...) extracting: 20110117_170459.jpg extracting: 20110117_173458.jpg extracting: 20110117_180501.jpg Using the wget through apache alias. local:~ user$ wget http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip --12:38:13-- http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip => `2011.01.zip' Resolving example.com... ip.ip.ip.ip Connecting to example.com|ip.ip.ip.ip|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 6,327,747 (6.0M) [application/zip] 100% [=====================================================================================================>] 6,327,747 1.03M/s ETA 00:00 12:38:56 (143.23 KB/s) - `2011.01.zip' saved [6327747/6327747] local:~ user$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg (... same as before...) extracting: 20110117_183459.jpg Using scp to grab the zip local:~ user$ scp user@server:/export1/amos/images/2011/84/3484/00003484/2011.01.zip . 2011.01.zip 100% 6179KB 475.3KB/s 00:13 local:~ user$ unzip 2011.01.zip Archive: 2011.01.zip extracting: 20110114_140547.jpg (...same as before...) extracting: 20110117_183459.jpg Using Fugu to download 2011.01.zip from /export1/amos/images/2011/84/3484/00003484/ gives images 20110113_090457.jpg through 201100114_010554.jpg Using Firefox to download 2011.01.zip from http://example.com/zipfiles/2011/84/3484/00003484/2011.01.zip gives images 20110113_090457.jpg through 201100114_010554.jpg Using Chrome gives same results as Firefox. Relevant section from apache httpd.conf: # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the realname directory are treated as applications and # run by the server when requested rather than as documents sent to the client. # The same rules about trailing "/" apply to ScriptAlias directives as to # Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" Alias /zipfiles/ /export1/amos/images/

Read the article

Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

- by Brian Stinar

I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

Read the article

Apt-Get Update: failure to fetch; can't connect to any sources

- by weberc2

I realize there are dozens of "apt-get update: failure to fetch" questions (I read through all I could find), but my present circumstance is unique to 12.04 and it affects all sources; not just launchpad. Additionally, I've tried several different servers in Europe and the U.S. as well as the "main server" (wherever that is) and they all yield the same result: I can't connect to any software sources. Additionally, I'm fairly certain the problem stems from the upgrade from 11.10-12.04 I performed this morning, as updates worked immediately before. Updates from the Update Manager worked fine and I could download some things (mutter) from the Software Center without incident, which makes me think I can connect to some subset of the Ubuntu servers (however, several other Ubuntu servers--like extras--and some canonical servers are listed as 'unable to connect'). Here is the output from sudo apt-get update: sudo apt-get update Ign http://ftp.u-picardie.fr precise InRelease Ign http://archive.canonical.com precise InRelease Ign http://ftp.u-picardie.fr precise-updates InRelease Ign http://ftp.u-picardie.fr precise-backports InRelease Err http://ftp.u-picardie.fr precise-security InRelease Err http://ftp.u-picardie.fr precise Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-updates Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-backports Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-security Release.gpg Unable to connect to ftp.u-picardie.fr:http: Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.canonical.com precise/partner i386 Packages Ign http://archive.canonical.com precise/partner TranslationIndex Ign http://dl.google.com stable InRelease Ign http://dl.google.com stable InRelease Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Ign http://extras.ubuntu.com precise InRelease Get:1 http://dl.google.com stable Release.gpg [198 B] Err http://extras.ubuntu.com precise Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) Ign http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Get:2 http://dl.google.com stable Release.gpg [198 B] Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Get:3 http://dl.google.com stable Release [1,347 B] Get:4 http://dl.google.com stable Release [1,347 B] Get:5 http://dl.google.com stable/main i386 Packages [1,268 B] Ign http://dl.google.com stable/main TranslationIndex Get:6 http://dl.google.com stable/main i386 Packages [769 B] Ign http://dl.google.com stable/main TranslationIndex Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Fetched 5,127 B in 7s (673 B/s) Reading package lists... Done W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/InRelease W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-updates/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-backports/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) W: Failed to fetch http://ppa.launchpad.net/caffeine-developers/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Some index files failed to download. They have been ignored, or old ones used instead. W: Duplicate sources.list entry http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_nemequ_sqlheavy_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_sgringwe_beatbox_ubuntu_dists_precise_main_binary-i386_Packages) Contents of /etc/apt/sources.list: # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release i386 (20111012)]/ oneiric main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security restricted main multiverse universe #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main Testing Alternate sources.list file These are the steps I followed to produce the following output: Please backup your sources.list: sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup and then replace the contents of /etc/apt/sources.list with the below lines and run apt-get update: deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner deb http://extras.ubuntu.com/ubuntu precise main Output: someone@someone-UBook:~$ sudo apt-get update Ign http://archive.canonical.com precise InRelease Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Ign http://archive.ubuntu.com precise InRelease Ign http://extras.ubuntu.com precise InRelease Ign http://archive.ubuntu.com precise-updates InRelease Hit http://archive.canonical.com precise/partner i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Ign http://archive.ubuntu.com precise-backports InRelease Ign http://archive.canonical.com precise/partner TranslationIndex Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Hit http://extras.ubuntu.com precise Release Get:1 http://archive.ubuntu.com precise Release.gpg [198 B] Ign http://dl.google.com stable InRelease Err http://dl.google.com stable InRelease Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Get:2 http://archive.ubuntu.com precise-updates Release.gpg [198 B] Hit http://extras.ubuntu.com precise/main i386 Packages Get:3 http://archive.ubuntu.com precise-backports Release.gpg [198 B] Ign http://security.ubuntu.com precise-security InRelease Ign http://extras.ubuntu.com precise/main TranslationIndex Err http://extras.ubuntu.com precise/main Translation-en_US Unable to connect to extras.ubuntu.com:http: Err http://extras.ubuntu.com precise/main Translation-en Unable to connect to extras.ubuntu.com:http: Get:4 http://security.ubuntu.com precise-security Release.gpg [198 B] Get:5 http://archive.ubuntu.com precise Release [49.6 kB] Get:6 http://security.ubuntu.com precise-security Release [49.6 kB] Get:7 http://archive.ubuntu.com precise-updates Release [49.6 kB] Get:8 http://archive.ubuntu.com precise-backports Release [49.6 kB] Get:9 http://security.ubuntu.com precise-security/main i386 Packages [32.9 kB] Get:10 http://archive.ubuntu.com precise/main i386 Packages [1,274 kB] Get:11 http://security.ubuntu.com precise-security/restricted i386 Packages [14 B] Get:12 http://security.ubuntu.com precise-security/universe i386 Packages [8,594 B] Get:13 http://security.ubuntu.com precise-security/multiverse i386 Packages [1,393 B] Get:14 http://security.ubuntu.com precise-security/main TranslationIndex [73 B] Get:15 http://security.ubuntu.com precise-security/multiverse TranslationIndex [71 B] Get:16 http://security.ubuntu.com precise-security/restricted TranslationIndex [70 B] Get:17 http://security.ubuntu.com precise-security/universe TranslationIndex [72 B] Get:18 http://security.ubuntu.com precise-security/main Translation-en [13.6 kB] Get:19 http://security.ubuntu.com precise-security/multiverse Translation-en [587 B] Get:20 http://security.ubuntu.com precise-security/restricted Translation-en [14 B] Get:21 http://security.ubuntu.com precise-security/universe Translation-en [6,261 B] Get:22 http://archive.ubuntu.com precise/restricted i386 Packages [8,431 B] Get:23 http://archive.ubuntu.com precise/universe i386 Packages [4,796 kB] Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Get:24 http://ppa.launchpad.net precise Release.gpg [316 B] Get:25 http://ppa.launchpad.net precise Release.gpg [316 B] Get:26 http://ppa.launchpad.net precise Release.gpg [316 B] Ign http://ppa.launchpad.net precise Release.gpg Get:27 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:28 http://ppa.launchpad.net precise Release.gpg [316 B] Get:29 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:30 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:31 http://ppa.launchpad.net precise Release [11.9 kB] Get:32 http://ppa.launchpad.net precise Release [11.9 kB] Get:33 http://archive.ubuntu.com precise/multiverse i386 Packages [121 kB] Get:34 http://ppa.launchpad.net precise Release [11.9 kB] Ign http://ppa.launchpad.net precise Release Get:35 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://ppa.launchpad.net precise Release Hit http://archive.ubuntu.com precise/restricted TranslationIndex Get:36 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/universe TranslationIndex Get:37 http://ppa.launchpad.net precise Release [11.9 kB] Get:38 http://archive.ubuntu.com precise-updates/main i386 Packages [96.5 kB] Hit http://ppa.launchpad.net precise Release Get:39 http://ppa.launchpad.net precise Release [11.9 kB] Get:40 http://archive.ubuntu.com precise-updates/restricted i386 Packages [770 B] Hit http://ppa.launchpad.net precise Release Get:41 http://archive.ubuntu.com precise-updates/universe i386 Packages [27.7 kB] Get:42 http://ppa.launchpad.net precise/main Sources [524 B] Get:43 http://archive.ubuntu.com precise-updates/multiverse i386 Packages [1,393 B] Get:44 http://ppa.launchpad.net precise/main i386 Packages [507 B] Hit http://archive.ubuntu.com precise-updates/main TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://archive.ubuntu.com precise-updates/restricted TranslationIndex Get:45 http://ppa.launchpad.net precise/main Sources [932 B] Hit http://archive.ubuntu.com precise-updates/universe TranslationIndex Get:46 http://ppa.launchpad.net precise/main i386 Packages [1,017 B] Get:47 http://archive.ubuntu.com precise-backports/main i386 Packages [559 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:48 http://archive.ubuntu.com precise-backports/restricted i386 Packages [14 B] Get:49 http://archive.ubuntu.com precise-backports/universe i386 Packages [1,391 B] Get:50 http://ppa.launchpad.net precise/main Sources [1,402 B] Get:51 http://archive.ubuntu.com precise-backports/multiverse i386 Packages [14 B] Hit http://archive.ubuntu.com precise-backports/main TranslationIndex Get:52 http://ppa.launchpad.net precise/main i386 Packages [1,605 B] Hit http://archive.ubuntu.com precise-backports/multiverse TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse Translation-en Get:53 http://ppa.launchpad.net precise/main Sources [931 B] Hit http://archive.ubuntu.com precise/restricted Translation-en Get:54 http://ppa.launchpad.net precise/main i386 Packages [1,079 B] Hit http://archive.ubuntu.com precise/universe Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/main Translation-en Hit http://ppa.launchpad.net precise/main Sources Hit http://archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Hit http://archive.ubuntu.com precise-updates/restricted Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/universe Translation-en Get:55 http://ppa.launchpad.net precise/main Sources [3,611 B] Hit http://archive.ubuntu.com precise-backports/main Translation-en Get:56 http://ppa.launchpad.net precise/main i386 Packages [2,468 B] Hit http://archive.ubuntu.com precise-backports/multiverse Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted Translation-en Hit http://archive.ubuntu.com precise-backports/universe Translation-en Get:57 http://ppa.launchpad.net precise/main Sources [1,524 B] Get:58 http://ppa.launchpad.net precise/main i386 Packages [2,719 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://ppa.launchpad.net precise/main Sources Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Get:59 http://ppa.launchpad.net precise/main Sources [1,052 B] Get:60 http://ppa.launchpad.net precise/main i386 Packages [1,388 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:61 http://ppa.launchpad.net precise/main Sources [1,185 B] Get:62 http://ppa.launchpad.net precise/main i386 Packages [1,698 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Err http://ppa.launchpad.net precise/main Sources 404 Not Found Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Fetched 6,699 kB in 15s (445 kB/s) Reading package lists... Done W: Failed to fetch http://dl.google.com/linux/talkplugin/deb/dists/stable/InRelease W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/sta

Read the article

12.04: Apt-Get Update: failure to fetch; can't connect to any sources

- by weberc2

I realize there are dozens of "apt-get update: failure to fetch" questions (I read through all I could find), but my present circumstance is unique to 12.04 and it affects all sources; not just launchpad. Additionally, I've tried several different servers in Europe and the U.S. as well as the "main server" (wherever that is) and they all yield the same result: I can't connect to any software sources. Additionally, I'm fairly certain the problem stems from the upgrade from 11.10-12.04 I performed this morning, as updates worked immediately before. Updates from the Update Manager worked fine and I could download some things (mutter) from the Software Center without incident, which makes me think I can connect to some subset of the Ubuntu servers (however, several other Ubuntu servers--like extras--and some canonical servers are listed as 'unable to connect'). Here is the output from sudo apt-get update: sudo apt-get update Ign http://ftp.u-picardie.fr precise InRelease Ign http://archive.canonical.com precise InRelease Ign http://ftp.u-picardie.fr precise-updates InRelease Ign http://ftp.u-picardie.fr precise-backports InRelease Err http://ftp.u-picardie.fr precise-security InRelease Err http://ftp.u-picardie.fr precise Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-updates Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-backports Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-security Release.gpg Unable to connect to ftp.u-picardie.fr:http: Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.canonical.com precise/partner i386 Packages Ign http://archive.canonical.com precise/partner TranslationIndex Ign http://dl.google.com stable InRelease Ign http://dl.google.com stable InRelease Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Ign http://extras.ubuntu.com precise InRelease Get:1 http://dl.google.com stable Release.gpg [198 B] Err http://extras.ubuntu.com precise Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) Ign http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Get:2 http://dl.google.com stable Release.gpg [198 B] Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Get:3 http://dl.google.com stable Release [1,347 B] Get:4 http://dl.google.com stable Release [1,347 B] Get:5 http://dl.google.com stable/main i386 Packages [1,268 B] Ign http://dl.google.com stable/main TranslationIndex Get:6 http://dl.google.com stable/main i386 Packages [769 B] Ign http://dl.google.com stable/main TranslationIndex Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Fetched 5,127 B in 7s (673 B/s) Reading package lists... Done W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/InRelease W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-updates/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-backports/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) W: Failed to fetch http://ppa.launchpad.net/caffeine-developers/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Some index files failed to download. They have been ignored, or old ones used instead. W: Duplicate sources.list entry http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_nemequ_sqlheavy_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_sgringwe_beatbox_ubuntu_dists_precise_main_binary-i386_Packages) Contents of /etc/apt/sources.list: # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release i386 (20111012)]/ oneiric main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security restricted main multiverse universe #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main Testing Alternate sources.list file These are the steps I followed to produce the following output: Please backup your sources.list: sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup and then replace the contents of /etc/apt/sources.list with the below lines and run apt-get update: deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner deb http://extras.ubuntu.com/ubuntu precise main Output: someone@someone-UBook:~$ sudo apt-get update Ign http://archive.canonical.com precise InRelease Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Ign http://archive.ubuntu.com precise InRelease Ign http://extras.ubuntu.com precise InRelease Ign http://archive.ubuntu.com precise-updates InRelease Hit http://archive.canonical.com precise/partner i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Ign http://archive.ubuntu.com precise-backports InRelease Ign http://archive.canonical.com precise/partner TranslationIndex Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Hit http://extras.ubuntu.com precise Release Get:1 http://archive.ubuntu.com precise Release.gpg [198 B] Ign http://dl.google.com stable InRelease Err http://dl.google.com stable InRelease Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Get:2 http://archive.ubuntu.com precise-updates Release.gpg [198 B] Hit http://extras.ubuntu.com precise/main i386 Packages Get:3 http://archive.ubuntu.com precise-backports Release.gpg [198 B] Ign http://security.ubuntu.com precise-security InRelease Ign http://extras.ubuntu.com precise/main TranslationIndex Err http://extras.ubuntu.com precise/main Translation-en_US Unable to connect to extras.ubuntu.com:http: Err http://extras.ubuntu.com precise/main Translation-en Unable to connect to extras.ubuntu.com:http: Get:4 http://security.ubuntu.com precise-security Release.gpg [198 B] Get:5 http://archive.ubuntu.com precise Release [49.6 kB] Get:6 http://security.ubuntu.com precise-security Release [49.6 kB] Get:7 http://archive.ubuntu.com precise-updates Release [49.6 kB] Get:8 http://archive.ubuntu.com precise-backports Release [49.6 kB] Get:9 http://security.ubuntu.com precise-security/main i386 Packages [32.9 kB] Get:10 http://archive.ubuntu.com precise/main i386 Packages [1,274 kB] Get:11 http://security.ubuntu.com precise-security/restricted i386 Packages [14 B] Get:12 http://security.ubuntu.com precise-security/universe i386 Packages [8,594 B] Get:13 http://security.ubuntu.com precise-security/multiverse i386 Packages [1,393 B] Get:14 http://security.ubuntu.com precise-security/main TranslationIndex [73 B] Get:15 http://security.ubuntu.com precise-security/multiverse TranslationIndex [71 B] Get:16 http://security.ubuntu.com precise-security/restricted TranslationIndex [70 B] Get:17 http://security.ubuntu.com precise-security/universe TranslationIndex [72 B] Get:18 http://security.ubuntu.com precise-security/main Translation-en [13.6 kB] Get:19 http://security.ubuntu.com precise-security/multiverse Translation-en [587 B] Get:20 http://security.ubuntu.com precise-security/restricted Translation-en [14 B] Get:21 http://security.ubuntu.com precise-security/universe Translation-en [6,261 B] Get:22 http://archive.ubuntu.com precise/restricted i386 Packages [8,431 B] Get:23 http://archive.ubuntu.com precise/universe i386 Packages [4,796 kB] Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Get:24 http://ppa.launchpad.net precise Release.gpg [316 B] Get:25 http://ppa.launchpad.net precise Release.gpg [316 B] Get:26 http://ppa.launchpad.net precise Release.gpg [316 B] Ign http://ppa.launchpad.net precise Release.gpg Get:27 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:28 http://ppa.launchpad.net precise Release.gpg [316 B] Get:29 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:30 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:31 http://ppa.launchpad.net precise Release [11.9 kB] Get:32 http://ppa.launchpad.net precise Release [11.9 kB] Get:33 http://archive.ubuntu.com precise/multiverse i386 Packages [121 kB] Get:34 http://ppa.launchpad.net precise Release [11.9 kB] Ign http://ppa.launchpad.net precise Release Get:35 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://ppa.launchpad.net precise Release Hit http://archive.ubuntu.com precise/restricted TranslationIndex Get:36 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/universe TranslationIndex Get:37 http://ppa.launchpad.net precise Release [11.9 kB] Get:38 http://archive.ubuntu.com precise-updates/main i386 Packages [96.5 kB] Hit http://ppa.launchpad.net precise Release Get:39 http://ppa.launchpad.net precise Release [11.9 kB] Get:40 http://archive.ubuntu.com precise-updates/restricted i386 Packages [770 B] Hit http://ppa.launchpad.net precise Release Get:41 http://archive.ubuntu.com precise-updates/universe i386 Packages [27.7 kB] Get:42 http://ppa.launchpad.net precise/main Sources [524 B] Get:43 http://archive.ubuntu.com precise-updates/multiverse i386 Packages [1,393 B] Get:44 http://ppa.launchpad.net precise/main i386 Packages [507 B] Hit http://archive.ubuntu.com precise-updates/main TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://archive.ubuntu.com precise-updates/restricted TranslationIndex Get:45 http://ppa.launchpad.net precise/main Sources [932 B] Hit http://archive.ubuntu.com precise-updates/universe TranslationIndex Get:46 http://ppa.launchpad.net precise/main i386 Packages [1,017 B] Get:47 http://archive.ubuntu.com precise-backports/main i386 Packages [559 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:48 http://archive.ubuntu.com precise-backports/restricted i386 Packages [14 B] Get:49 http://archive.ubuntu.com precise-backports/universe i386 Packages [1,391 B] Get:50 http://ppa.launchpad.net precise/main Sources [1,402 B] Get:51 http://archive.ubuntu.com precise-backports/multiverse i386 Packages [14 B] Hit http://archive.ubuntu.com precise-backports/main TranslationIndex Get:52 http://ppa.launchpad.net precise/main i386 Packages [1,605 B] Hit http://archive.ubuntu.com precise-backports/multiverse TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse Translation-en Get:53 http://ppa.launchpad.net precise/main Sources [931 B] Hit http://archive.ubuntu.com precise/restricted Translation-en Get:54 http://ppa.launchpad.net precise/main i386 Packages [1,079 B] Hit http://archive.ubuntu.com precise/universe Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/main Translation-en Hit http://ppa.launchpad.net precise/main Sources Hit http://archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Hit http://archive.ubuntu.com precise-updates/restricted Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/universe Translation-en Get:55 http://ppa.launchpad.net precise/main Sources [3,611 B] Hit http://archive.ubuntu.com precise-backports/main Translation-en Get:56 http://ppa.launchpad.net precise/main i386 Packages [2,468 B] Hit http://archive.ubuntu.com precise-backports/multiverse Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted Translation-en Hit http://archive.ubuntu.com precise-backports/universe Translation-en Get:57 http://ppa.launchpad.net precise/main Sources [1,524 B] Get:58 http://ppa.launchpad.net precise/main i386 Packages [2,719 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://ppa.launchpad.net precise/main Sources Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Get:59 http://ppa.launchpad.net precise/main Sources [1,052 B] Get:60 http://ppa.launchpad.net precise/main i386 Packages [1,388 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:61 http://ppa.launchpad.net precise/main Sources [1,185 B] Get:62 http://ppa.launchpad.net precise/main i386 Packages [1,698 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Err http://ppa.launchpad.net precise/main Sources 404 Not Found Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Fetched 6,699 kB in 15s (445 kB/s) Reading package lists... Done W: Failed to fetch http://dl.google.com/linux/talkplugin/deb/dists/stable/InRelease W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/sta

Read the article

Wireless Connected But No Internet Connection (Ubuntu 12.04)

- by Zxy

I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

Read the article

What does DetourAttach(&(PVOID &)BindKeyT, BindKeyD); mean? Attaching a detour to a memory address..

- by user288546

Hello everyone! This is just a simple question. I've been reading the source of something which attaches to a memory address of a subroutine using DetourAttach(&(PVOID &)BindKeyT, BindKeyD); where BindKeyT is the address to a subroutine in memory. I'm curious, what exactly does (&(PVOID &) mean in english? I understand that PVOID is a void pointer, but how does this get translated into a function which can be used to attach a detour to?

Read the article

Ports do not open after rules appended in iptables

- by user2699451

I have a server that I am trying to setup for OpenVPN. I have followed all the steps, but I see that when I try to connect to it in Windows, it doesn't allow me, it just hangs on connecting, so I did a nmap scan and I see that port 1194 is not open so naturally I append the rule to open 1194 with: iptables -A INPUT -i eth0 -p tcp --dport 1194 -j ACCEPT followed by service iptables save and service iptables restart which all executed successfully. Then I try again, but it doesn't work and another nmap scan says that port 1194 is closed. Here is the iptables configuration: # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *nat :PREROUTING ACCEPT [27410:3091993] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [5042:376160] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -j SNAT --to-source 41.185.26.238 -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE COMMIT # Completed on Thu Oct 31 09:47:38 2013 # Generated by iptables-save v1.4.7 on Thu Oct 31 09:47:38 2013 *filter :INPUT ACCEPT [23571:2869068] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [27558:3656524] :vl - [0:0] -A INPUT -p tcp -m tcp --dport 5252 -m comment --comment "SSH Secure" -j ACCEPT -A INPUT -p icmp -m icmp --icmp-type 8 -m state --state NEW,RELATED,ESTABLISHED -$ -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -m comment --comment "SSH" -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -m comment --comment "HTTP" -j ACCEPT -A INPUT -p tcp -m tcp --dport 8080 -m comment --comment "HTTPS" -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -m comment --comment "HTTP Encrypted" -j ACCEP$ -A INPUT -i eth0 -p tcp -m tcp --dport 1723 -j ACCEPT -A INPUT -i eth0 -p gre -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A FORWARD -i ppp+ -o eth0 -j ACCEPT -A FORWARD -i eth0 -o ppp+ -j ACCEPT -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 10.8.0.0/24 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-port-unreachable -A OUTPUT -p icmp -m icmp --icmp-type 0 -m state --state RELATED,ESTABLISHED -j A$ COMMIT # Completed on Thu Oct 31 09:47:38 2013 and my nmap scan from: localhost: nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds remote pc: nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 09:53 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.025s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 15.70 seconds So, I do not know what is causing this, any assistance will be appreciated! UPDATE AFTER FIRST ANSWER::: [root@RLA04-NIX1 ~]# iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT [root@RLA04-NIX1 ~]# iptables -A FORWARD -j REJECT [root@RLA04-NIX1 ~]# iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE [root@RLA04-NIX1 ~]# service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ] [root@RLA04-NIX1 ~]# service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter nat [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: [ OK ] [root@RLA04-NIX1 ~]# lsof -i :1194 -bash: lsof: command not found iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:5252 /* SSH Secure */ ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 state NEW,RELATED,ESTABLISHED ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 /* SSH */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 /* HTTP */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 /* HTTPS */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 /* HTTP Encrypted */ ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:1723 ACCEPT 47 -- 0.0.0.0/0 0.0.0.0/0 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 0.0.0.0/0 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 state RELATED,ESTABLISHED Chain vl (0 references) target prot opt source destination [root@RLA04-NIX1 ~]# nmap localhostt Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST remote pc nmap [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:11 SAST Nmap scan report for rla04-nix1.wadns.net (41.185.26.238) Host is up (0.020s latency). Not shown: 858 filtered ports, 139 closed ports PORT STATE SERVICE 22/tcp open ssh 443/tcp open https 8008/tcp open http Nmap done: 1 IP address (1 host up) scanned in 4.18 seconds localhost nmap localhost Starting Nmap 5.51 ( http://nmap.org ) at 2013-10-31 11:13 SAST Nmap scan report for localhost (127.0.0.1) Host is up (0.000011s latency). Other addresses for localhost (not scanned): 127.0.0.1 Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 443/tcp open https 1723/tcp open pptp Nmap done: 1 IP address (1 host up) scanned in 0.06 seconds UPDATE AFTER SCANNING UDP PORTS Sorry, I am noob, I am still learning, but here is the output for: nmap -sU [server ip] Starting Nmap 6.00 ( http://nmap.org ) at 2013-10-31 11:33 SAST Nmap scan report for [server address] ([server ip]) Host is up (0.021s latency). Not shown: 997 open|filtered ports PORT STATE SERVICE 53/udp closed domain 123/udp closed ntp 33459/udp closed unknown Nmap done: 1 IP address (1 host up) scanned in 8.57 seconds btw, no changes have been made since post started (except for iptables changes)

Read the article

ASA 5505 Vlan question

- by Wayne

I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1 nameif inside security-level 100 ip address 192.168.110.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 pppoe client vpdn group birdie ip address removedIP 255.255.255.255 pppoe ! interface Vlan3 no forward interface Vlan1 nameif home security-level 50 ip address 192.168.7.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 3 ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring access-list Outside-In extended permit icmp any any access-list Outside-In extended permit tcp any any eq www access-list Outside-In extended permit tcp any any eq https access-list Outside-In extended permit tcp any any eq 5969 access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 any access-list inside_in extended permit icmp any any access-list inside_in extended permit ip any any access-list home_in extended permit icmp any any access-list home_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1492 mtu outside 1492 mtu home 1500 ip local pool vpnuser 192.168.111.5-192.168.111.20 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 nat (home) 1 192.168.7.0 255.255.255.0 static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 access-group inside_in in interface inside access-group Outside-In in interface outside access-group home_in in interface home route outside 0.0.0.0 0.0.0.0 RemovedIP 1

Read the article

Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

- by thomas

I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

Read the article

Infinite sharing system (PHP/MySQLi)

- by Toine Lille

I'm working on a discount system for whichever customer shares a product and brings in new customers. Each unique visit = $0.05 off, each new customer = $0.50 off (it's a cheap product so yeah, no big numbers). When a new customer shares the site, the customer initially responsible for the new customer (if any) will get half of the new customer's discount as well. The initial customer would get a fourth for the next level and the new customer half of that, etc, creating a tree or pyramid that way that could be infinite. Initial customer ($1.35 discount: 2 new+3 visits + half of 1 new+2 visits) Visitor ($0) Visitor ($0) New customer ($0.60) Visitor ($0) Visitor ($0) Newer customer ($0) New customer ($0) Visitor ($0) The customers are saved along with their IP addresses (bin2hex(inet_pton)) in a database table (customers) with info like a unique id, e-mail address and first date/time the purchased a product (= time of registration). The shares are saved in a separate table within the same database (sharing). Each unique IP addresses that visits the site creates a new row featuring the IP address (also saved as bin2hex(inet_pton)), the id of the customer who shared it and the date/time of the visit. Sharing goes via URL, featuring a GET element containing the customer's id. Visits and new customers overlap, as visits will always occur before the new customer does. That's fine. The date/times are used just to make it a little more secure (I also use the IP along with cookies to see if people cheat the system). If an IP is already in the sharing or customer tables, it does not count and will not create a new entry. Now the problem is, how to make the infinity happen and apply the different values to it? That's all I'd need to know. It needs to calculate the discount for each customer separately, but also allow for monitoring altogether (though that's just a matter of passing all ID's through it). I figured I'd start (after the database connection) with $stmt = $con->prepare('SELECT ip,datetime FROM sharing WHERE sender=?'); $stmt->bind_param('i',$customerid); $stmt->execute(); $stmt->store_result(); $discount = $discount + ($stmt->num_rows * 0.05); $stmt->bind_result($ip,$timeofsharing); to translate all the visits to $0.05 of discount each. To check for the new customers that came from these visits, I wrote the following: while ($sql->fetch()) { $stmt2 = $con->prepare("SELECT datetime FROM users WHERE ip=?"); $stmt2->bind_param('s',$ip); $stmt2->execute(); $stmt2->store_result(); $stmt2->bind_result($timeofpurchase); Followed by a little more security comparing the datetimes: while ($stmt2->fetch()) { if (strtotime($timeofpurchase) < strtotime($timeofsharing)) { $discount = $discount + $0.50; } But this is just for the initial customer's direct results. If I'd want to check for the next level, I'd basically have to put the exact same check and loop in itself, checking each new customer the initial customer they brought to the site, and then for the next level again to check all of the newer customers, etc, etc. What to do? / Where to go? / What would be the correct practice for this? Thanks!

Read the article

Communication Between Your PC and Azure VM via Windows Azure Connect

- by Shaun

With the new release of the Windows Azure platform there are a lot of new features available. In my previous post I introduced a little bit about one of them, the remote desktop access to azure virtual machine. Now I would like to talk about another cool stuff – Windows Azure Connect. What’s Windows Azure Connect I would like to quote the definition of the Windows Azure Connect in MSDN With Windows Azure Connect, you can use a simple user interface to configure IP-sec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. IP-sec protects communications over Internet Protocol (IP) networks through the use of cryptographic security services. There’s an image available at the MSDN as well that I would like to forward here As we can see, using the Windows Azure Connect the Worker Role 1 and Web Role 1 are connected with the development machines and database servers which some of them are inside the organization some are not. With the Windows Azure Connect, the roles deployed on the cloud could consume the resource which located inside our Intranet or anywhere in the world. That means the roles can connect to the local database, access the local shared resource such as share files, folders and printers, etc. Difference between Windows Azure Connect and AppFabric It seems that the Windows Azure Connect are duplicated with the Windows Azure AppFabric. Both of them are aiming to solve the problem on how to communication between the resource in the cloud and inside the local network. The table below lists the differences in my understanding. Category Windows Azure Connect Windows Azure AppFabric Purpose An IP-sec connection between the local machines and azure roles. An application service running on the cloud. Connectivity IP-sec, Domain-joint Net Tcp, Http, Https Components Windows Azure Connect Driver Service Bus, Access Control, Caching Usage Azure roles connect to local database server Azure roles use local shared files, folders and printers, etc. Azure roles join the local AD. Expose the local service to Internet. Move the authorization process to the cloud. Integrate with existing identities such as Live ID, Google ID, etc. with existing local services. Utilize the distributed cache. And also some scenarios on which of them should be used. Scenario Connect AppFabric I have a service deployed in the Intranet and I want the people can use it from the Internet. Y I have a website deployed on Azure and need to use a database which deployed inside the company. And I don’t want to expose the database to the Internet. Y I have a service deployed in the Intranet and is using AD authorization. I have a website deployed on Azure which needs to use this service. Y I have a service deployed in the Intranet and some people on the Internet can use it but need to be authorized and authenticated. Y I have a service in Intranet, and a website deployed on Azure. This service can be used from Internet and that website should be able to use it as well by AD authorization for more functionalities. Y Y How to Enable Windows Azure Connect OK we talked a lot information about the Windows Azure Connect and differences with the Windows Azure AppFabric. Now let’s see how to enable and use the Windows Azure Connect. First of all, since this feature is in CTP stage we should apply before use it. On the Windows Azure Portal we can see our CTP features status under Home, Beta Program page. You can send the apply to join the Beta Programs to Microsoft in this page. After a few days the Microsoft will send an email to you (the email of your Live ID) when it’s available. In my case we can see that the Windows Azure Connect had been activated by Microsoft and then we can click the Connect button on top, or we can click the Virtual Network item from the left navigation bar. The first thing we need, if it’s our first time to enter the Connect page, is to enable the Windows Azure Connect. After that we can see our Windows Azure Connect information in this page. Add a Local Machine to Azure Connect As we explained below the Windows Azure Connect can make an IP-sec connection between the local machines and azure role instances. So that we firstly add a local machine into our Azure Connect. To do this we will click the Install Local Endpoint button on top and then the portal will give us an URL. Copy this URL to the machine we want to add and it will download the software to us. This software will be installed in the local machines which we want to join the Connect. After installed there will be a tray-icon appeared to indicate this machine had been joint our Connect. The local application will be refreshed to the Windows Azure Platform every 5 minutes but we can click the Refresh button to let it retrieve the latest status at once. Currently my local machine is ready for connect and we can see my machine in the Windows Azure Portal if we switched back to the portal and selected back Activated Endpoints node. Add a Windows Azure Role to Azure Connect Let’s create a very simple azure project with a basic ASP.NET web role inside. To make it available on Windows Azure Connect we will open the azure project property of this role from the solution explorer in the Visual Studio, and select the Virtual Network tab, check the Activate Windows Azure Connect. The next step is to get the activation token from the Windows Azure Portal. In the same page there is a button named Get Activation Token. Click this button then the portal will display the token to me. We copied this token and pasted to the box in the Visual Studio tab. Then we deployed this application to azure. After completed the deployment we can see the role instance was listed in the Windows Azure Portal - Virtual Connect section. Establish the Connect Group The final task is to create a connect group which contains the machines and role instances need to be connected each other. This can be done in the portal very easy. The machines and instances will NOT be connected until we created the group for them. The machines and instances can be used in one or more groups. In the Virtual Connect section click the Groups and Roles node from the left side navigation bar and clicked the Create Group button on top. This will bring up a dialog to us. What we need to do is to specify a group name, description; and then we need to select the local computers and azure role instances into this group. After the Azure Fabric updated the group setting we can see the groups and the endpoints in the page. And if we switch back to the local machine we can see that the tray-icon have been changed and the status turned connected. The Windows Azure Connect will update the group information every 5 minutes. If you find the status was still in Disconnected please right-click the tray-icon and select the Refresh menu to retrieve the latest group policy to make it connected. Test the Azure Connect between the Local Machine and the Azure Role Instance Now our local machine and azure role instance had been connected. This means each of them can communication to others in IP level. For example we can open the SQL Server port so that our azure role can connect to it by using the machine name or the IP address. The Windows Azure Connect uses IPv6 to connect between the local machines and role instances. You can get the IP address from the Windows Azure Portal Virtual Network section when select an endpoint. I don’t want to take a full example for how to use the Connect but would like to have two very simple tests. The first one would be PING. When a local machine and role instance are connected through the Windows Azure Connect we can PING any of them if we opened the ICMP protocol in the Filewall setting. To do this we need to run a command line before test. Open the command window on the local machine and the role instance, execute the command as following netsh advfirewall firewall add rule name="ICMPv6" dir=in action=allow enable=yes protocol=icmpv6 Thanks to Jason Chen, Patriek van Dorp, Anton Staykov and Steve Marx, they helped me to enable the ICMPv6 setting. For the full discussion we made please visit here. You can use the Remote Desktop Access feature to logon the azure role instance. Please refer my previous blog post to get to know how to use the Remote Desktop Access in Windows Azure. Then we can PING the machine or the role instance by specifying its name. Below is the screen I PING my local machine from my azure instance. We can use the IPv6 address to PING each other as well. Like the image following I PING to my role instance from my local machine thought the IPv6 address. Another example I would like to demonstrate here is folder sharing. I shared a folder in my local machine and then if we logged on the role instance we can see the folder content from the file explorer window. Summary In this blog post I introduced about another new feature – Windows Azure Connect. With this feature our local resources and role instances (virtual machines) can be connected to each other. In this way we can make our azure application using our local stuff such as database servers, printers, etc. without expose them to Internet. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Oracle Solaris Zones Physical to virtual (P2V)

- by user939057

IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature: Simple- easy build process using Oracle Solaris 10 built-in commands. Robust- based on Oracle Solaris Zones a robust and well known virtualization technology. Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following: -S specifies that we skip the disk space check and do not write archive size data to the archive (faster). -n specifies the image name. -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

Read the article

Introducción a ENUM (E.164 Number Mapping)

- by raul.goycoolea

E.164 Number Mapping (ENUM o Enum) se diseñó para resolver la cuestión de como se pueden encontrar servicios de internet mediante un número telefónico, es decir cómo se pueden usar los los teléfonos, que solamente tienen 12 teclas, para acceder a servicios de Internet. La parte más básica de ENUM es por tanto la convergencia de las redes del STDP y la IP; ENUM hace que pueda haber una correspondencia entre un número telefónico y un identificador de Internet. En síntesis, Enum es un conjunto de protocolos para convertir números E.164 en URIs, y viceversa, de modo que el sistema de numeración E.164 tenga una función de correspondencia con las direcciones URI en Internet. Esta función es necesaria porque un número telefónico no tiene sentido en el mundo IP, ni una dirección IP tiene sentido en las redes telefónicas. Así, mediante esta técnica, las comunicaciones cuyo destino se marque con un número E.164, puedan terminar en el identificador correcto (número E.164 si termina en el STDP, o URI si termina en redes IP). La solución técnica de mirar en una base de datos cual es el identificador de destino tiene consecuencias muy interesantes, como que la llamada se pueda terminar donde desee el abonado llamado. Esta es una de las características que ofrece ENUM : el destino concreto, el terminal o terminales de terminación, no lo decide quien inicia la llamada o envía el mensaje sino la persona que es llamada o recibe el mensaje, que ha escrito sus preferencias en una base de datos. En otras palabras, el destinatario de la llamada decide cómo quiere ser contactado, tanto si lo que se le comunica es un email, o un sms, o telefax, o una llamada de voz. Cuando alguien quiera llamarle a usted, lo que tiene que hacer el llamante es seleccionar su nombre (el del llamado) en la libreta de direcciones del terminal o marcar su número ENUM. Una aplicación informática obtendrá de una base de datos los datos de contacto y disponibilidad que usted decidió. Y el mensaje le será remitido tal como usted especificó en dicha base de datos. Esto es algo nuevo que permite que usted, como persona llamada, defina sus preferencias de terminación para cualquier tipo de contenido. Por ejemplo, usted puede querer que todos los emails le sean enviados como sms o que los mensajes de voz se le remitan como emails; las comunicaciones ya no dependen de donde esté usted o deque tipo de terminal utiliza (teléfono, pda, internet). Además, con ENUM usted puede gestionar la portabilidad de sus números fijos y móviles. ENUM emplea una técnica de búsqueda indirecta en una base de datos que tiene los registros NAPTR ("Naming Authority Pointer Resource Records" tal como lo define el RFC 2915), y que utiliza el número telefónico Enum como clave de búsqueda, para obtener qué URIs corresponden a cada número telefónico. La base de datos que almacena estos registros es del tipo DNS.Si bien en uno de sus diversos usos sirve para facilitar las llamadas de usuarios de VoIP entre redes tradicionales del STDP y redes IP, debe tenerse en cuenta que ENUM no es una función de VoIP sino que es un mecanismo de conversión entre números/identificadores. Por tanto no debe ser confundido con el uso normal de enrutar las llamadas de VoIP mediante los protocolos SIP y H.323. ENUM puede ser muy útil para aquellas organizaciones que quieran tener normalizada la manera en que las aplicaciones acceden a los datos de comunicación de cada usuario. FundamentosPara que la convergencia entre el Sistema Telefónico Disponible al Público (STDP) y la Telefonía por Internet o Voz sobre IP (VoIP) y que el desarrollo de nuevos servicios multimedia tengan menos obstáculos, es fundamental que los usuarios puedan realizar sus llamadas tal como están acostumbrados a hacerlo, marcando números. Para eso, es preciso que haya un sistema universal de correspondencia de número a direcciones IP (y viceversa) y que las diferentes redes se puedan interconectar. Hay varias fórmulas que permiten que un número telefónico sirva para establecer comunicación con múltiples servicios. Una de estas fórmulas es el Electronic Number Mapping System ENUM, normalizado por el grupo de tareas especiales de ingeniería en Internet (IETF, Internet engineering task force), del que trata este artículo, que emplea la numeración E.164, los protocolos y la infraestructura telefónica para acceder indirectamente a diferentes servicios. Por tanto, se accede a un servicio mediante un identificador numérico universal: un número telefónico tradicional. ENUM permite comunicar las direcciones del mundo IP con las del mundo telefónico, y viceversa, sin problemas. Antes de entrar en mayores profundidades, conviene dar una breve pincelada para aclarar cómo se organiza la correspondencia entre números o URI. Para ello imaginemos una llamada que se inicia desde el servicio telefónico tradicional con destino a un número Enum. En ENUM Público, el abonado o usuario Enum a quien va destinada lallamada, habrá decidido incluir en la base de datos Enum uno o varios URI o números E.164, que forman una lista con sus preferencias para terminar la llamada. Y el sistema como se explica más adelante, elegirá cual es el número o URI adecuado para dicha terminación. Por tanto como resultado de la consulta a la base dedatos Enum siempre se da una relación unívoca entre el número Enum marcado y el de terminación, conforme a los deseos de la persona llamada.Variedades de ENUMUna posible fuente de confusión cuando se trata sobre ENUM es la variedad de soluciones o sistemas que emplean este calificativo. Lo habitual es que cuando se haga una referencia a ENUM se trate de uno de los siguientes casos: ENUM Público: Es la visión original de ENUM, como base de datos pública, parecida a un directorio, donde el abonado "opta" a ser incluido en la base de datos, que está gestionada en el dominio e164.arpa, delegando a cada país la gestión de la base de datos y la numeración. También se conoce como ENUM de usuario. Carrier ENUM, o ENUM Infraestructura, o de Operador: Cuando grupos de operadores proveedores de servicios de comunicaciones electrónicas acuerdan compartir la información de los abonados por medio de ENUM mediante acuerdos privados. En este caso son los operadores quienes controlan la información del abonado en vez de hacerlo (optar) los propios abonados. Carrier ENUM o ENUM de Operador también se conoce como Infrastructure ENUM o ENUM Infraestructura, y está siendo normalizado por IETF para la interconexión de VoIP (mediante acuerdos de peering). Como se explicará en la correspondiente sección, también se puede utilizar para la portabilidad o conservación de número. ENUM Privado: Un operador de telefonía o de VoIP, o un ISP, o un gran usuario, puede utilizar las técnicas de ENUM en sus redes y en las de sus clientes sin emplear DNS públicos, con DNS privados o internos. Resulta fácil imaginar como puede utilizarse esta técnica para que compañías multinacionales, o bancos, o agencias de viajes, tengan planes de numeración muy coherentes y eficaces. Cómo funciona ENUMPara conocer cómo funciona Enum, le remitimos a la página correspondiente a ENUM Público, puesto que esa variedad de Enum es la típica, la que dió lugar a todos los procedimientos y normas de IETF .Más detalles sobre: @page { margin: 0.79in } P { margin-bottom: 0.08in } H4 { margin-bottom: 0.08in } H4.ctl { font-family: "Lohit Hindi" } A:link { so-language: zxx } -- ENUM Público. En esta página se explica con cierto detalle como funciona Enum Carrier ENUM o ENUM de Operador ENUM Privado Normas técnicas: RFC 2915: NAPTR RR. The Naming Authority Pointer (NAPTR) DNS Resource Record RFC 3761: ENUM Protocol. The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM). (obsoletes RFC 2916). RFC 3762: Usage of H323 addresses in ENUM Protocol RFC 3764: Usage of SIP addresses in ENUM Protocol RFC 3824: Using E.164 numbers with SIP RFC 4769: IANA Registration for an Enumservice Containing Public Switched Telephone Network (PSTN) Signaling Information RFC 3026: Berlin Liaison Statement RFC 3953: Telephone Number Mapping (ENUM) Service Registration for Presence Services RFC 2870: Root Name Server Operational Requirements RFC 3482: Number Portability in the Global Switched Telephone Network (GSTN): An Overview RFC 2168: Resolution of Uniform Resource Identifiers using the Domain Name System Organizaciones relacionadas con ENUM RIPE - Adimistrador del nivel 0 de ENUM e164.arpa. ITU-T TSB - Unión Internacional de Telecomunicaciones ETSI - European Telecommunications Standards Institute VisionNG - Administrador del rango ENUM 878-10 IETF ENUM Chapter

Read the article

How to properly add .NET assemblies to Powershell session?

- by amandion

I have a .NET assembly (a dll) which is an API to backup software we use here. It contains some properties and methods I would like to take advantage of in my Powershell script(s). However, I am running into a lot of issues with first loading the assembly, then using any of the types once the assembly is loaded. The complete file path is: C:\rnd\CloudBerry.Backup.API.dll In Powershell I use: $dllpath = "C:\rnd\CloudBerry.Backup.API.dll" Add-Type -Path $dllpath I get the error below: Add-Type : Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. At line:1 char:9 + Add-Type <<<< -Path $dllpath + CategoryInfo : NotSpecified: (:) [Add-Type], ReflectionTypeLoadException + FullyQualifiedErrorId : System.Reflection.ReflectionTypeLoadException,Microsoft.PowerShell.Commands.AddTypeComma ndAdd-Type : Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information. Using the same cmdlet on another .NET assembly, DotNetZip, which has examples of using the same functionality on the site also does not work for me. I eventually find that I am seemingly able to load the assembly using reflection: [System.Reflection.Assembly]::LoadFrom($dllpath) Although I don't understand the difference between the methods Load, LoadFrom, or LoadFile that last method seems to work. However, I still seem to be unable to create instances or use objects. Each time I try, I get errors that describe that Powershell is unable to find any of the public types. I know the classes are there: $asm = [System.Reflection.Assembly]::LoadFrom($dllpath) $cbbtypes = $asm.GetExportedTypes() $cbbtypes | Get-Member -Static ---- start of excerpt ---- TypeName: CloudBerryLab.Backup.API.BackupProvider Name MemberType Definition ---- ---------- ---------- PlanChanged Event System.EventHandler`1[CloudBerryLab.Backup.API.Utils.ChangedEventArgs] PlanChanged(Sy... PlanRemoved Event System.EventHandler`1[CloudBerryLab.Backup.API.Utils.PlanRemoveEventArgs] PlanRemoved... CalculateFolderSize Method static long CalculateFolderSize() Equals Method static bool Equals(System.Object objA, System.Object objB) GetAccounts Method static CloudBerryLab.Backup.API.Account[], CloudBerry.Backup.API, Version=1.0.0.1, Cu... GetBackupPlans Method static CloudBerryLab.Backup.API.BackupPlan[], CloudBerry.Backup.API, Version=1.0.0.1,... ReferenceEquals Method static bool ReferenceEquals(System.Object objA, System.Object objB) SetProfilePath Method static System.Void SetProfilePath(string profilePath) ----end of excerpt---- Trying to use static methods fail, I don't know why!!! [CloudBerryLab.Backup.API.BackupProvider]::GetAccounts() Unable to find type [CloudBerryLab.Backup.API.BackupProvider]: make sure that the assembly containing this type is load ed. At line:1 char:42 + [CloudBerryLab.Backup.API.BackupProvider] <<<< ::GetAccounts() + CategoryInfo : InvalidOperation: (CloudBerryLab.Backup.API.BackupProvider:String) [], RuntimeException + FullyQualifiedErrorId : TypeNotFound Any guidance appreciated!!

Read the article

httpd dead but subsys locked

- by McShark

Hello, I modified today max_execution_time in php.ini, when I restarted the server, I get this error : Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs I killed httpd proc : killall httpd, and started it fine, but the I can't open any web site on the server. service httpd status OUTPUT : httpd dead but subsys locked I removed httpd file from /var/lock/subsys/ :S Same problem. Please Help!

Read the article

Excessive CPU Utilization for Bind 9.8.1 `named` processes

- by justinzane

I just noticed that named is eating vast amounts of CPU time for a very small network with only a few domains. Can someone help me determine what is misconfigured, please? Or how to debug this. top top - 14:13:08 up 25 days, 14:16, 1 user, load average: 1.04, 1.04, 1.05 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.3 us, 4.3 sy, 0.0 ni, 78.2 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 2042776 total, 1347916 used, 694860 free, 249396 buffers KiB Swap: 3976080 total, 30552 used, 3945528 free, 574164 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17445 bind 20 0 244m 42m 3124 S 99.4 2.2 2345:03 named rndc stats +++ Statistics Dump +++ (1352931389) ++ Incoming Requests ++ 65869 QUERY ++ Incoming Queries ++ 31809 A 241 NS 3 CNAME 27455 SOA 276 PTR 123 MX 462 TXT 5400 AAAA 7 A6 1 DS 14 DNSKEY 15 SPF 55 AXFR 8 ANY ++ Outgoing Queries ++ [View: internal] 22206 A 509 NS 10 SOA 25 PTR 12 MX 524 TXT 4851 AAAA 62 DNSKEY 19 SPF 3157 DLV [View: external] 87 A 2 NS 80 AAAA 120 DNSKEY 7 DLV [View: _bind] ++ Name Server Statistics ++ 65869 IPv4 requests received 27670 requests with EDNS(0) received 112 TCP requests received 65652 responses sent 20 truncated responses sent 27670 responses with EDNS(0) sent 62920 queries resulted in successful answer 37117 queries resulted in authoritative answer 28482 queries resulted in non authoritative answer 7 queries resulted in referral answer 591 queries resulted in nxrrset 53 queries resulted in SERVFAIL 2081 queries resulted in NXDOMAIN 14530 queries caused recursion 162 duplicate queries received 55 requested transfers completed ++ Zone Maintenance Statistics ++ 109536 IPv4 notifies sent ++ Resolver Statistics ++ [Common] [View: internal] 29362 IPv4 queries sent 2013 IPv6 queries sent 28531 IPv4 responses received 4209 NXDOMAIN received 6 SERVFAIL received 31 FORMERR received 32 EDNS(0) query failures 3359 query retries 836 query timeouts 5348 IPv4 NS address fetches 3271 IPv6 NS address fetches 83 IPv4 NS address fetch failed 2779 IPv6 NS address fetch failed 17421 DNSSEC validation attempted 12731 DNSSEC validation succeeded 4690 DNSSEC NX validation succeeded 21104 queries with RTT 10-100ms 7418 queries with RTT 100-500ms 3 queries with RTT 500-800ms 1 queries with RTT 800-1600ms [View: external] 192 IPv4 queries sent 104 IPv6 queries sent 192 IPv4 responses received 2 NXDOMAIN received 104 query retries 44 IPv4 NS address fetches 44 IPv6 NS address fetches 1 IPv4 NS address fetch failed 1 IPv6 NS address fetch failed 4 DNSSEC validation attempted 3 DNSSEC validation succeeded 1 DNSSEC NX validation succeeded 152 queries with RTT 10-100ms 40 queries with RTT 100-500ms [View: _bind] ++ Cache DB RRsets ++ [View: internal (Cache: internal)] 2007 A 652 NS 131 CNAME 1 MX 32 TXT 421 AAAA 28 DS 244 RRSIG 110 NSEC 3 DNSKEY 2 !A 2 !TXT 89 !AAAA 2 !SPF 14 !DLV 148 NXDOMAIN [View: external (Cache: external)] 55 A 12 NS 34 AAAA 2 DS 10 RRSIG 1 DNSKEY [View: _bind (Cache: _bind)] ++ Socket I/O Statistics ++ 82958 UDP/IPv4 sockets opened 2118 UDP/IPv6 sockets opened 4 TCP/IPv4 sockets opened 1 TCP/IPv6 sockets opened 82956 UDP/IPv4 sockets closed 2117 UDP/IPv6 sockets closed 58 TCP/IPv4 sockets closed 15 UDP/IPv4 socket bind failures 2117 UDP/IPv6 socket connect failures 29554 UDP/IPv4 connections established 59 TCP/IPv4 connections accepted 2117 UDP/IPv6 send errors 5 UDP/IPv4 recv errors ++ Per Zone Query Statistics ++ --- Statistics Dump --- (1352931389)

Read the article

VirtualBox 4.1.12 Ubuntu Host Bridged Networking

- by hidden_premise

Setup Ubuntu Server 11.10 x64 VirtualBox 4.1.12 One network adapter eth0 with a static IP address My /etc/network/interfaces looks like #Local loopback auto lo iface lo inet loopback #Primary Interface auto eth0 iface eth0 inet static address 10.0.0.6 netmask 255.255.255.0 gateway 10.0.0.1 Need Static IP for Ubuntu Host Static IP for multiple Ubuntu guests My attempt Downloaded the .deb for 64bit virtual box dpkg -i virtualbox.deb Create a VM and install ubuntu server 11.10 x64 from ISO Set the networking mode to bridged and choose 'eth0' as the interface Fail. None of the guides I can find for bridged networking work because everything changed since vbox 2

Read the article

PPTP ping client to client error

- by Linux Intel

I installed pptp server on a centos 6 64bit server PPTP Server ip : 55.66.77.10 PPTP Local ip : 10.0.0.1 Client1 IP : 10.0.0.60 centos 5 64bit Client2 IP : 10.0.0.61 centos5 64bit PPTP Server can ping Client1 And client 1 can ping PPTP Server PPTP Server can ping Client2 And client 2 can ping PPTP Server The problem is client 1 can not ping Client 2 route -n on PPTP Server Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.60 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 10.0.0.61 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1 55.66.77.10 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 55.66.77.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 1 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 70.14.13.19 255.255.255.255 UGH 0 0 0 eth0 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 0.0.0.0 70.14.13.19 0.0.0.0 UG 0 0 0 eth0 route -n On Client 2 Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 55.66.77.10 84.56.120.60 255.255.255.255 UGH 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0 0.0.0.0 84.56.120.60 0.0.0.0 UG 0 0 0 eth1 cat /etc/ppp/options.pptpd on PPTP server ############################################################################### # $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $ # # Sample Poptop PPP options file /etc/ppp/options.pptpd # Options used by PPP when a connection arrives from a client. # This file is pointed to by /etc/pptpd.conf option keyword. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 and the kernel MPPE module. ############################################################################### # Authentication # Name of the local system for authentication purposes # (must match the second field in /etc/ppp/chap-secrets entries) name pptpd # Strip the domain prefix from the username before authentication. # (applies if you use pppd with chapms-strip-domain patch) #chapms-strip-domain # Encryption # (There have been multiple versions of PPP with encryption support, # choose with of the following sections you will use.) # BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o # {{{ refuse-pap refuse-chap refuse-mschap # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. require-mschap-v2 # Require MPPE 128-bit encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) require-mppe-128 # }}} # OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o # {{{ #-chap #-chapms # Require the peer to authenticate itself using MS-CHAPv2 [Microsoft # Challenge Handshake Authentication Protocol, Version 2] authentication. #+chapms-v2 # Require MPPE encryption # (note that MPPE requires the use of MSCHAP-V2 during authentication) #mppe-40 # enable either 40-bit or 128-bit, not both #mppe-128 #mppe-stateless # }}} # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the second instance (if given) # specifies the secondary DNS address. #ms-dns 10.0.0.1 #ms-dns 10.0.0.2 # If pppd is acting as a server for Microsoft Windows or "Samba" # clients, this option allows pppd to supply one or two WINS (Windows # Internet Name Services) server addresses to the clients. The first # instance of this option specifies the primary WINS address; the # second instance (if given) specifies the secondary WINS address. #ms-wins 10.0.0.3 #ms-wins 10.0.0.4 # Add an entry to this system's ARP [Address Resolution Protocol] # table with the IP address of the peer and the Ethernet address of this # system. This will have the effect of making the peer appear to other # systems to be on the local ethernet. # (you do not need this if your PPTP server is responsible for routing # packets to the clients -- James Cameron) proxyarp # Normally pptpd passes the IP address to pppd, but if pptpd has been # given the delegate option in pptpd.conf or the --delegate command line # option, then pppd will use chap-secrets or radius to allocate the # client IP address. The default local IP address used at the server # end is often the same as the address of the server. To override this, # specify the local IP address here. # (you must not use this unless you have used the delegate option) #10.8.0.100 # Logging # Enable connection debugging facilities. # (see your syslog configuration for where pppd sends to) debug # Print out all the option values which have been set. # (often requested by mailing list to verify options) #dump # Miscellaneous # Create a UUCP-style lock file for the pseudo-tty to ensure exclusive # access. lock # Disable BSD-Compress compression nobsdcomp # Disable Van Jacobson compression # (needed on some networks with Windows 9x/ME/XP clients, see posting to # poptop-server on 14th April 2005 by Pawel Pokrywka and followups, # http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2 ) novj novjccomp # turn off logging to stderr, since this may be redirected to pptpd, # which may trigger a loopback nologfd # put plugins here # (putting them higher up may cause them to sent messages to the pty) cat /etc/ppp/options.pptp on Client1 and Client2 ############################################################################### # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $ # # Sample PPTP PPP options file /etc/ppp/options.pptp # Options used by PPP when a connection is made by a PPTP client. # This file can be referred to by an /etc/ppp/peers file for the tunnel. # Changes are effective on the next connection. See "man pppd". # # You are expected to change this file to suit your system. As # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ # and the kernel MPPE module available from the CVS repository also on # http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe. ############################################################################### # Lock the port lock # Authentication # We don't need the tunnel server to authenticate itself noauth # We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2 # (you may need to remove these refusals if the server is not using MPPE) refuse-pap refuse-eap refuse-chap refuse-mschap # Compression # Turn off compression protocols we know won't be used nobsdcomp nodeflate # Encryption # (There have been multiple versions of PPP with encryption support, # choose which of the following sections you will use. Note that MPPE # requires the use of MSCHAP-V2 during authentication) # # Note that using PPTP with MPPE and MSCHAP-V2 should be considered # insecure: # http://marc.info/?l=pptpclient-devel&m=134372640219039&w=2 # https://github.com/moxie0/chapcrack/blob/master/README.md # http://technet.microsoft.com/en-us/security/advisory/2743314 # http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras # ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o # If the kernel is booted in FIPS mode (fips=1), the ppp_mppe.ko module # is not allowed and PPTP-MPPE is not available. # {{{ # Require MPPE 128-bit encryption #require-mppe-128 # }}} # http://mppe-mppc.alphacron.de/ fork from PPP project by Jan Dubiec # ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o # {{{ # Require MPPE 128-bit encryption #mppe required,stateless # }}} IPtables are stopped on clients and server, Also net.ipv4.ip_forward = 1 is enabled on PPTP Server. How can i solve this problem .?

Search Results

Search found 33162 results on 1327 pages for 'static ip address'.

Page 238/1327 | < Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >

- by LBushkin

- by DarthRoman

- by ruruma

- by Roman

- by Aron Rotteveel

- by Brendan ODonnell

- by Charlie Somerville

- by Austin A.

- by Brian Stinar

- by weberc2

- by weberc2

- by Zxy

- by user288546

- by user2699451

- by Wayne

- by thomas

- by Toine Lille

- by Shaun

- by user939057

- by raul.goycoolea

- by amandion

- by McShark

- by justinzane

- by hidden_premise

- by Linux Intel

< Previous Page | 234 235 236 237 238 239 240 241 242 243 244 245 | Next Page >