Search Results

Search found 10196 results on 408 pages for 'features'.

Page 239/408 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• Can a power failure or forceful shutdown damage hardware?

  - by Vilx-

  Can computer hardware suffer damage from forceful shutdowns (holding the power button for five (5) seconds) or power failures? I believe that normal PC hardware does not suffer from this - after all, it's not much different than what they experience under a standard shutdown. But elsewhere I've read tht another person thought that it could do physical harm to the hard drive and possibly other components as well. He also said that the journaling features of filesystems are useless in face of power failures and were intended to help mitigate damage from system crashes. I think this is nonsense, but then again I lack the experience and knowledge to say it with certainty.

  Read the article

• Regression testing for firewall changes

  - by James C

  We have a number of firewalls in place around our organisation and in some cases packets can pass through four levels of firewall limiting the flow TCP traffic. A concept that I'm used to from software testing is regression testing, allowing you to run a test suite against a changed application to verify that the new changes haven't affected any old features. Does anyone have any experience or an offer any solutions to being able to perform the same type of thing with firewall changes and network testing? The problem becomes a lot more complicated because you'd ideally want to be originating (and testing receipt) of packets across many machines.

  Read the article

• Windows 7 has trouble installing software with Visual C++ 2005 & 2008

  - by John Fitzgerald

  I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

  Read the article

• Configuring htaccess to show authentication prompt only for subdomain

  - by Philipp Lenssen

  How do I write the htaccess so that it will only require authentication when on admin.example.com, but not on www.example.com (like by using some if-else clause)? Background: I have a site running in two modes: The admin mode should be reached at something like admin.example.com, whereas the normal mode would be www.example.com -- but both should point to the same directory & scripts within them (the scripts then turn on certain editing features by checking if the script is accessed from the admin subdomain). Edit: I can now see this has been asked and answered at StackOverflow, though I can't get the top answer to work for me...

  Read the article

• to measure throughput of testing device connect to server via AP

  - by samantha

  Description of project- I have a test tool to which DUT connects. The test tool has an access point in it and once DUT get connected to it via mac address we check RSSI and some other features of WiFi of DUT. Now I am wondering is there is any way I can measure throughput of Device under test via mac address of DUT from server side. Test-tool has LINUX fedora 11 in it and major coding is done in c/C++ and json command. Previously, I have tried to install ftp server on test-tool and DUT can connect to it and we can measure the throughput or data transfer rate, but this is not feasible solution as it requires lot of intervention from DUT. What I am interested in is 1) To run some script on server side /test tool and it gives me throughput of bandwidth of connected device may be via mac address of DUT OR 2) Server script transfer some files/packets to DUT and we can measure the throughput. Coding is not a major challenge at this stage , I just need some tool which requires minimum intervention from DUT.

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• Is it possible to add tcp autotuning to windows xp?

  - by Caspin

  I have a network application that needs to send messages at 60 times a second. The messages are usually 300-400 bytes, but can be as large as 1500. The default setting for SO_SNDBUF is too small and limits the number of message that can be sent if the network latency is anything greater then 100ms. The naive solution is to just bump the SO_SNDBUF size to to something large. However, depending on the latency and the packet size that could be anywhere from 64K to 8MB. One of Vista's new features is TCP autotuning. Autotuning monitors the tcp connection and dynamically adjust the buffer sizes to allow for optimal communication. I would like to use auto tuning on our windows xp machine so I don't need to guess what my buffers sizes should be. Is there a way to install either a microsoft or 3rd party tcp autotuner on windows xp?

  Read the article

• World's simplest, LIGHTEST email client?

  - by rekindleMyLoveOf

  I do not want the bloat that is outlook, nor do I need exchange server-like nifty features. Most certainly do not want the bloat that is thunderbird. I just want to be able to send and receive email as/with the particular email account I set up on my domain. Pocomail sounded like a nice idea but apparently it does not deal with html and since this is for a tiny fledgling biz, i think I might need to accomodate html... so I didn't investigate further. Too bad gmail won't let me send from my own mail server, really. :o) What do you guys use that simple and nifty? ===edit=== forgot to mention this is going to be on Windows Vista. (Hey, I'm not a "superuser", okay? I got bounced from stackoverflow :-) )

  Read the article

• Laptops trying to connect via wireless? Only able to connect only via wired connection

  - by Chris J. Lee

  It seems that all the wireless laptops in the office have disconnected and are unable to reconnect to the wifi after a terrible storm caused some power interruptions. Troubleshooting actions Verify wireless broadcasting is up With each laptop i ended up flushing their dns cache on Win 7 (ipconfig /flush ) Performed an ipconfig /all to see what the new ip is Made sure password was correct Reset the router (multiple times) restarted each laptop. Tried connecting wirelessly Am i missing some small detail ? Network information The router is a linksys/cisco WRVS4400N router. Supports a lot of fancy features i don't know how to use. We have 3 static ip's the conference room computer, the wireless printer, my computer Mostly windows machines, we have 3 mac users

  Read the article

• FoxPro 2.6 DOS on Windows 7 64-bit

  - by Rolando

  I support a company that has a very old, mission critical, FoxPro for DOS 2.6 (FPD) application. For variuos reasons the company didn't adapt/migrate their app, which, ironically, has been running even better under Windows XP (and 32-bit Win7) because the OS allowed new features like more reliable networking, distributed printing, email integration. Unfortunately for this company, most new machines now come with a 64-bit version of Windows 7, which is incompatible with their FPD app. I know this time the writing is on the wall: the only long-term solution is to migrate their app. But I wonder if anyone can suggest a temporary alternative path, which doesn't involve either: downgrade 64-bit Windows to 32-bit, or run the app on a virtualized 32-bit XP

  Read the article

• Alternatives to the ClickToPlugin Safari extension for Chrome users

  - by Stewart Adam

  I have been using Safari with ClickToPlugin and was wondering if there was anything similar for Chrome. I am looking for both the click-through to plugin functionality as well as the HTML5 video replacements. I've done some looking around the Chrome extensions page and found some specific extensions to help with forcing the HTML5 on YouTube or to block Flash but none seem offer the generic functionality (click-through works for any given plugin) and flexibility that ClickToPlugin does (ClickToPlugin has HTML5 video replacements for a plethora of websites). I am looking to mimic the aforementioned features in Chrome, but they don't necessarily have to be provided by one single extension.

  Read the article

• Need personal music collection streaming solution

  - by purpler

  I used to use Opera and it's built in media server feature for some time and it both worked and looked really well. It's dead now and i'm in search of a decent audio streaming solution (Windows 8) to be able to stream my music collection via http to work or whatever.. I tried couple of PHP scripts but they all looked really awful, also, tried couple of solutions mentioned here at Superuser but i wasn't really satisfied.. I tried vibestreamer as well and while it looks really nice i'm not really into installing it as an application. I've set up an WAMP server which i intend to use in this purpose. I'd be mostly satisfied with a way to browse my collection folders and pick the one i want to play, no playlists and various sorting features a la iTunes. Any suggestions? Thanks

  Read the article

• ntbackup workalike for adhoc full backups in Windows 7 thats free and preferably open source

  - by Justin Dearing

  On windows 2000 and XP machines I used to be able to do the following: ntbackup backup systemstate c: /f e:\backups\machineName\machineName-full+systemstate_200101206.bkf This gave me a full backup of the system that I could use to do a system restore, after doing a barebones OS install. Windows 7 has a great utility for regular backups with alerting and all that stuff. It does not seem to have command line support. I'd like a backup solution for my Windwos 7 systems that has the following features: Is free Is open source (preferebly) Works while the system is booted and leaves the system functional (clonezilla is great for offline backups, and I use that too) Gives me a backup that is suited for a full system restore or partial system restore (ruling out most imaging software even if they could work while the system is booted via some sort of shadow copy voodoo) Can work via the command line Compression would be nice, the ability to pipe output would be better.

  Read the article

• Can't set up IIS Web Server on Server 2008 x64 correctly (what have I missed?)

  - by balexandre

  Using a VM I installed Windows 2008 Server x64 and as the image below shows, added the IIS Role full image and assigned all role features of IIS full image But if I have an ASP.NET (aspx) page that does (C#) Session["test-session"] = "A"; and read in other page I always get nothing! NOTE: I do have an entire ASP.NET web application, the example above is to be succinct and explicit on what is the problem I'm facing. Can anyone know what do I have to do to the Server, so I can use the Session variables? All help is greatly appreciated, Thank you

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• Creating a custom NAS compatible with the Mac Time machine and for media streaming

  - by Bobby Alexander

  I am planning to assemble a custom NAS machine using an Intel Atom processor. I need the NAS for the following purposes: It should be accessible from by Windows PC so that I can dump data on the NAS (installations, media etc) It should be accessible from my Macbook for the above use. I should be able to use it with the Mac time machine software for backup. The media should be available to my PS3 for streaming. I should be able to access it from my iphone. All the above features should be available over wireless. The time machine feature is very important. Is this even possible? Can someone provide resources on how I can assemble such a machine and setup the required software on it? Much appreciated.

  Read the article

• Ubuntu: Alternative task-switcher to what is provided in compiz

  - by user22106

  I'm running Ubuntu 11.04 and really enjoying it. The task switcher default in Ubuntu shows a list of small icons for each running app much like the windows task switcher. It's fast and effective. I enabled Compiz and noticed that the task switcher changed to one with small thumbnails showing a smaller version of each window. Nice, but it slows the task manager down to about 0.5 seconds to display, which for me is far too long. Have googled the forums and it's a very common problem with ubuntu/compiz. I want to run compiz as it provides so many other features, but the slow task switcher is just not going to run with me. So was wondering if there is some way of NOT letting compiz override the task switcher, or, if there is some other task switcher that I can install which will not be slow like the compiz one. Any help would be appreciated.

  Read the article

• esx 4 - c7000 - cisco 3020

  - by gdavid

  I have 4 blades with esx 4 installed in a HP c7000 enclosure. They have 6 cisco 3020 for hp switches in the backend. The plan was to use 2 switches for iSCSI traffic and the other 4 for data traffic. I am having a problem trunking the switches to our existing environment. The documentation i keep finding online has commands/features that are not available on the 3020 switch. Does anyone have this setup anywhere? I am looking to do Virtual Switch Tagging (VST) so i can control the machines vlan via the port groups. The only time any configuration worked for us was when our network team placed the command switchport native vlan x this setup only allowed vlan x to pass traffic and only when the port group was in vlan 0. Ideas? thanks for any help. -GD

  Read the article

• Recommend a Software for documenting work/research

  - by Rogue

  Need a software for documenting my work & research. I was considering to use blog engine but then I don't want to be playing around with backing up the databases and the matter separately. The specifications for the software would be: 1) To catalogue work by categories, tags and date. 2) Easy editing and drawing features 3) Easily incorporate saved html files into matter I'm writing, with the formatting and pictures. (probably use the mht format, don't want to be wasting timeformatting html pages) Would like the html pages to be directly displayed in the software and not opened on demand Software should be for Windows. Any recommendations? 4) Language tools could be an addition but only an optional feature

  Read the article

• How can I make a Prism webapp look like Firefox to a website? (user agent spoofing)

  - by Alex Aaron Goven

  I thought it would be cool to use Mozilla's Prism to create a webapp for min.us, but drag and drop is disallowed because the site doesn't see the program as Firefox, Chrome or Safari, those of which are apparently the only browsers allowed to do drag and drop for fear that something will be horribly broken. I'm pretty sure Prism runs on the same engine as Firefox, yet I wouldn't doubt it if Prism is running on an older version since it's kind of a forgotten beta. Anyways, like the title says, I want to be able to make Prism webapps appear look like Firefox to websites to unlock awesome features. Also, if it can only be done with Fluid, then I answers regarding that will be fine. I'm not sure what engine it's running though.

  Read the article

• Why PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing in IT in France, and when looking on alternative on the very [...] very expensive Cisco equipment, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipment in France :( Thank you !

  Read the article

• Can't figure out how to make Slitaz USB persistent

  - by Dennis Hodapp

  I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

  Read the article

• How to install Active Directory Users and Computers for Windows 2008

  - by Mark Arnott

  I want to install the administration tools on a Windows Server 2008 (R1) machine. On Windows 2003 you installed adminpak.msi, but I can't find such a file for 2008. Is this a "feature" in Server Manager? If so what is it named? ---UPDATE--- So I drilled into the server Features list and I have "Remote Server Administration Tools" but it only includes File Services, Print Services and Web Server. This is a member server in a domain but not a domain controller. It is Windows 2008 (original) not R2. Still, why can't it run AD users and computers from this machine?

  Read the article

• REST-based file server

  - by Chris Wenham

  I need to be able to PUT files and GET them later using nothing but HTTP, so I went searching for something that might match the terms "REST file server" or "HTTP file server" or "REST drop-box", etc. Unfortunately, these terms bring up the wrong kind of results on Google. What I want is the equivalent of an SMB fileshare over HTTP. Some ideal features: Can PUT a file of any type at http://servername/service/any/path/I/want/document.pdf Anyone with access can GET that file at the URL I PUT it at Supports AV scanning on any new file that has been PUT Supports DELETE of existing resources (files) Our shop runs Windows, but I'd be interested to know about Unix software that can do this kind of thing, too. It's to be used in an IT department for private users only. It won't be on a public-facing IP address. Does anything like this exist?

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >