Search Results

Search found 26742 results on 1070 pages for 'linux kernel'.

Page 239/1070 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

• OpenVPN on Android TCP retransmissions after OpenVPN server reboot

  - by anogaki

  I raised OpenVPN on server for the first time. It worked fine until the server rebooted. The firewall configuration is unchanged. When I tcpdump from tun interface on the server, I always get TCP retransmissions on all TCP packets larger than a few bytes in Android. Using a similar(read: same) configuration on my Linux box from where I'm posting this message now works just fine; no retransmissions, no loss. It did work just fine before the server rebooted. What could possibly cause this? I already tried rebooting Android, it didn't help. Client configuration, used on both Linux PC and Android tablet: dev tun client remote 192.168.0.1 persist-key persist-tun nobind pkcs12 user.p12 mssfix 1480 cipher AES-256-CBC verb 3 1480 is below the mtu of uplink connection on server which is 1492. I tried adding tun-mtu 1480 to Android but that didn't help either.

  Read the article

• It's the End of the Life as We Know It and Linux Feels Fine

  <b>IT World:</b> "Since we live in an entropic universe, things end. Heady stuff for a Monday morning, I will admit, but just keep drinking that coffee, you'll catch up."

  Read the article

• Novell Revenues, Linux Business Slide

  As the company grapples with ownership issues, Novell reports revenues a decline in overall revenue but remains optimistic about the future.

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

• What is casper rw loop file and why do I need it to make saving persistant on usb flash drive?

  - by l245c4l

  Suppose I've installed linux on my flash drive. Why do I need something like casper loop file to make saving persistant? So files are being erased? Isn't flash drive the same as actual hard drive? I'm linux noob so be patient. Or it is because linux on flash drive is actually live cd on flash drive? Can it be installed just like it is installed on hard drive? Thanks in advance

  Read the article

• Ubuntu only boots with USB plugged in

  - by Ben

  I'm new to the Linux world so please bear with me! :-) I installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences. I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents: /media/disk$ tree . |-- adtext.cfg |-- boot.cat |-- f10.txt |-- f1.txt |-- f2.txt |-- f3.txt |-- f4.txt |-- f5.txt |-- f6.txt |-- f7.txt |-- f8.txt |-- f9.txt |-- initrd.gz |-- isolinux.bin |-- isolinux.cfg |-- ldlinux.sys |-- linux |-- menu.c32 |-- menu.cfg |-- po4a.cfg |-- prompt.cfg |-- splash.png |-- stdmenu.cfg |-- syslinux.cfg |-- text.cfg |-- ubnfilel.txt |-- ubnpathl.txt `-- vesamenu.c32 Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?

  Read the article

• List all devices of system

  - by pareshverma91

  In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

  Read the article

• Get Pidgin Logs From Other Directory

  - by silent

  I'm using pidgin on both, windows and linux on several pc. To sync my log, I use dropbox. For linux, it's easy. Just a matter of symlink. However, I don't know how to sync it on windows, without manual copy-paste once I'm done on windows. So, is there any solution to my problem? pidgin plugin, maybe? Update As MarkM's answer, I did this to solve my problem: backup and delete current log (it's located at C:\Users\{your user name}\Roaming\.purple\logs) mklink /D "C:\Users\{your user name}\Roaming\.purple\logs" "E:\My Dropbox\somepath\purplelogs" "C:\Users\{your user name}\Roaming\.purple\logs" is where you want your symlink at "E:\My Dropbox\somepath\purplelogs" is there you have your dropboxed logs.

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, Our sa recently installed Suse Linux enterprise Desktop 11 on my work box and I logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. Though when I remote log in to the machine it will let me get on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. My sa cant figure what is wrong either Thanks in advance for your help, Rohan

  Read the article

• SuSE always logs a user in TVM session

  - by rohan

  Hello all, I recently installed Suse Linux enterprise Desktop 11 on my box. I created an user and logged in first time into a GNOME session without any problems. Last time I logged in I selected the session as TWM and that got me into the T windows manager just fine. Now when I log out and try to log back into a GNOME session, it will still log me into the TVM session. I have tried restarting the box but that has not helped. However, when I remote log in to the machine it will let me got on the GNOME session just fine. I'm guessing this is probably a really simple fix, however I am a Linux newbie and doing a google search isn't yielding me what I'm looking for. Thanks in advance for your help, Rohan

  Read the article

• Fedora12, XP and connection sharing via iptables

  - by Paul L

  Just a quick question ( I Hope ) To find out if what I'm trying is even possible. I am trying to share internet connection with Fedora12 as default gateway and XP machine hooked up via NIC using iptables commands as shown in Mark Sobell's book 'A Practical Guide To Fedora And Red Hat Enterprise Linux' These are the commands as placed in /etc/rc.local iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT iptables -A FORWARD -j LOG iptables -t NAT -A POSTROUTING -o eth1 -j MASQUERADE I did flip the in and out parameters to match my NIC configuration ( as opposed to example from book ) but other than that followed example. One thing to note is that Sobell did not mention whether this should work with mix of Linux and XP. One other note ( maybe meaningless ) is that I do have samba working between the two machines. Thanks for any insights anyone might have. PL

  Read the article

• How to modify PATH variable for X11 during log-in?

  - by user1028435

  I originally posted this over at StackOverflow, but someone said it might fit better here. Original question is here: http://stackoverflow.com/questions/10096327/overwriting-print-screen-actions-in-linux-without-administrative-rights. Decided to revise my question, based on what I learned there: Essentially, my problem is that I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). You can see in the work-around I listed in the previous question, that I can make it work by starting a new X, but I was wondering if it is possible to change upon login. If this seems a poor explanation, you can check out the original link for my context and reasoning behind what I'm doing. Any ideas? Details about Distribution: cat /etc/redhat-release tells me: Red Hat Enterprise Linux Client release 5.8 (Tikanga)

  Read the article

• Tutorial: Automated Linux Server Backup Tips and Tricks

  This tutorial walks us step-by-step through creating a custom server backup script with some nifty features like bandwith throttling to avoid bogging down the server being backed up, how to exclude files, and how to synchronize deleted files.

  Read the article

• New documentation project for blind Linux users and all the others

  <b>Stop:</b> "When he realized that custom documentation for Free Software is needed for vision-impaired users, Tony Baechler offered to launch a dedicated service. I asked Tony what exactly he hopes to set up and how it should work."

  Read the article

• How do I create a customized keyboard layout for Windows?

  - by Pedro Palhoto

  On Linux you can create any layout you wish by editing the appropriate ASCII configuration files. On Windows the keyboard layout definitions are binary. Is there any tool that can create these binary keyboard layout configuration files? I grew up on the Macintosh international keyboard layout, which used the option key extensively, and now I would like to use the same layout on Windows. On Linux this Mac international keyboard layout exists for both the console as well as for X.Org. On Windows, the most similar layout is US International, which is not the same.

  Read the article

• How do I debug this FS error on a flash device?

  - by abc

  I have console access to an embedded linux device. This device has flash memory part of which is partitioned as a FAT filesystem. Its running linux-2.6.31. However I am seeing these errors on the console these days and the FAT file system becomes read only. 111109:154925 FAT: Filesystem error (dev loop0) 111109:154925 fat_get_cluster: invalid cluster chain (i_pos 0) 111109:154925 FAT: Filesystem error (dev loop0) 111109:154925 fat_get_cluster: invalid cluster chain (i_pos 0) I cannot understand why this happened? What is the root cause? And what is the fix? I would appreciate answers that can point me how to investigate the possible root cause of this issue on the device.

  Read the article

• Linux and the Dialup Modem

  <b>Raiden's Realm:</b> "However, about 35% of the US has to use dialup in one form or another. And in other countries it can be as high as 95%"

  Read the article

• Putty: Send EOF

  - by joshhendo

  Hi, I'm running Windows 7, and am connecting to a Linux server using Putty. For some programs I'm writing, I need to be able to pass EOF to the input. On Linux I'd normally type Ctrl-Z, but in Putty that seems to exit the program. Ctrl-D doesn't seem to work either. I have had a look at: http://the.earth.li/~sgtatham/putty/0.58/htmldoc/Chapter3.html#using-sysmenu , which suggests looking at http://the.earth.li/~sgtatham/putty/0.58/htmldoc/Chapter4.html#config-telnetkey , though it seems to be if I'm connecting to a Telnet server, which I'm not. Any suggestions on what I could do? Thanks.

  Read the article

• python-pam & pam_time module -- possible to check a user without password?

  - by medigeek

  I've looked at the example script of python-pam and linux pam pages, but it's a bit confusing, at least for a beginner in PAM (that I am): http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/Linux-PAM_ADG.html http://packages.ubuntu.com/python-pam Is it possible to check if a user has or does not have access to login, without entering password? I would like to create a script that root can use to check if a user is allowed or not to login to the system. If so, can someone post an example that checks if the user is allowed against pam_time? Thanks in advance!

  Read the article

• IP alias lost when changing main IP

  - by rmflow

  my /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.3.75 netmask 255.255.255.0 gateway 192.168.3.0 Situation 1: After linux booted I set an IP alias: ifconfig eth0:0 192.168.3.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.3.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 is lost! Situation 2: After linux booted I set an IP alias: ifconfig eth0:0 192.168.4.111 Now ifconfig reports two IP addresses 192.168.3.75 at eth0 and 192.168.4.111 at eth0:0 When I change main IP to another network: ifconfig eth0 192.168.1.111 the alias eth0:0 stays! How do I properly change main IP, so all my aliases are not lost?

  Read the article

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• External usb 3.0 hard drive is not recognised when plugged into usb 3 port (ubuntu natty 64 bit).

  - by kimangroo

  I have an Iomega Prestige Portable External Hard Drive 1TB USB 3.0. It works fine on windows 7 as a usb 3.0 drive. It isn't detected on ubuntu natty 64bit, 2.6.38-8-generic. fdisk -l cannot see it at all: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1bed746b Device Boot Start End Blocks Id System /dev/sda1 1 1689 13560832 27 Unknown /dev/sda2 * 1689 1702 102400 7 HPFS/NTFS /dev/sda3 1702 19978 146805760 7 HPFS/NTFS /dev/sda4 19978 60802 327914497 5 Extended /dev/sda5 25555 60802 283120640 7 HPFS/NTFS /dev/sda6 19978 23909 31571968 83 Linux /dev/sda7 23909 25555 13218816 82 Linux swap / Solaris Partition table entries are not in disk order lsusb can see it: Bus 003 Device 003: ID 059b:0070 Iomega Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai Bus 001 Device 004: ID 0c45:64b5 Microdia Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And dmesg | grep -i xhci (I may have unplugged the drive and plugged it back in again after booting): [ 1.659060] pci 0000:04:00.0: xHCI HW did not halt within 2000 usec status = 0x0 [ 11.484971] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.484997] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 11.485002] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 11.485064] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 11.636149] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 [ 11.636241] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 11.636246] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 11.636251] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.636256] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 11.636261] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 11.639654] xHCI xhci_add_endpoint called for root hub [ 11.639655] xHCI xhci_check_bandwidth called for root hub [ 11.956366] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 12.001073] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.007059] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.012932] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.018922] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.049139] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.056754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.131607] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 12.179717] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.686876] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 12.687058] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 12.687152] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 43.330737] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 2 [ 43.422579] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 43.422658] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af00 [ 43.422665] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af40 [ 43.422671] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af80 [ 43.422677] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669afc0 [ 43.531159] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 125.160248] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.766466] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 3 [ 903.807789] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.813530] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.819400] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.825104] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.855067] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862314] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862597] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.913211] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 904.424416] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 904.424599] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 904.424700] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 935.139021] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 3 [ 935.226075] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 935.226140] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b00 [ 935.226148] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b40 [ 935.226153] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b80 [ 935.226159] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186bc0 [ 935.343339] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst I thought it might be that the firmware wasn't compatible with linux or something, but when booting a live image of partedmagic, (2.6.38.4-pmagic), the drive was detected fine, I could mount it and got usb 3.0 speeds (at least they double the speeds I got from plugging same drive in usb 2 ports). dmesg in partedmagic did say something about no SuperSpeed endpoint which was an error I saw in a previous dmesg of ubuntu: Jun 27 15:49:02 (none) user.info kernel: [ 2.978743] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jun 27 15:49:02 (none) user.debug kernel: [ 2.978771] xhci_hcd 0000:04:00.0: setting latency timer to 64 Jun 27 15:49:02 (none) user.info kernel: [ 2.978781] xhci_hcd 0000:04:00.0: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 2.978856] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Jun 27 15:49:02 (none) user.info kernel: [ 3.089458] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 Jun 27 15:49:02 (none) user.debug kernel: [ 3.089541] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089544] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089546] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089548] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089550] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X Jun 27 15:49:02 (none) user.warn kernel: [ 3.092857] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values Jun 27 15:49:02 (none) user.info kernel: [ 3.092864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 Jun 27 15:49:02 (none) user.info kernel: [ 3.092866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 27 15:49:02 (none) user.info kernel: [ 3.092867] usb usb3: Product: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 3.092869] usb usb3: Manufacturer: Linux 2.6.38.4-pmagic xhci_hcd Jun 27 15:49:02 (none) user.info kernel: [ 3.092870] usb usb3: SerialNumber: 0000:04:00.0 Jun 27 15:49:02 (none) user.debug kernel: [ 3.092961] xHCI xhci_add_endpoint called for root hub Jun 27 15:49:02 (none) user.debug kernel: [ 3.092963] xHCI xhci_check_bandwidth called for root hub Well I have no idea what's going wrong, and I haven't had much luck from google and the forums so far. A number of unanswered threads with people with similar error messages and problems only. Hopefully someone here can help or point me in the right direction?!

  Read the article

• Indie Games See The Linux Market

  <b>Blog of Helios:</b> "Sure, I've played all the repository shooters...bloody chunks flying and monsters galore. I have a short attention span...mostly because I suck at shooter games. I just don't play them often. But every now and then, one game catches my eye. For this post, that game is Caster."

  Read the article

• Frank Zappa's Influence on Linux

  How the late musician lives on in the open source movement.

  Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >