Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 239/1061 | < Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >

  • How to get the speed of a network card on the command line?

    - by nelaar
    I am trying to see what the speed of some network cards on a remote server. Our reporting software says they are 10Mbps, but I am sure that is wrong they should be 1Gbps. Our monitoring software uses SNMP to query the servers, perhaps the servers are reporting information incorrectly. ifconfig does not report what the speed of the devices are. How can I see what the currently configured speed of the cards are.

    Read the article

  • Toshiba Satellite Laptop Realtek Network Driver Error code (10)?

    - by Silent
    hello all i have a Toshiba 64 bit windows vista, i tried looking for the drivers from the main website but no luck all the ones i got did not work or did not do anything. would someone know where i can find it or maybe fix this issue it will not find any network wireless or even if i hook up the Ethernet cable. i don't know why Toshiba makes it hard they should have a complete bundle. Model: A305-S687

    Read the article

  • What is the correct network configuration for a devStack VM (virtualbox)?

    - by Olivier
    Usually when I setup a new Ubuntu VM, i keep the eth0 in NAT mode to get the internet & I add a eth1 interface in HostOnly mode so that I can ssh. But using this devStack guide : Running a Cloud in a VM, it looks like it tried to use eth0 as the public interface (install got stuck because eth0 lost the network). I know an OpenStack setup usually requires two NICs, so I'm wondering what is the correct configuration for my VM.

    Read the article

  • Why should I use a switched network over routed?

    - by SRobertJames
    Now that routers are affordable, why should I build a network using Layer 2 switches, which degenerate to broadcasting under poor conditions, and not just use real routing at Layer 3? Edit: Got some great replies. Let me clarify the question: Of course, at the lowest level, you want to plug your end nodes into a switch, not a router (as demonstrated by AlReece). I'm referring to switches which are used to bridge traffic between segments - that is, switches connected to other switches.

    Read the article

  • What logs should I collect from a Windows server network?

    - by Cygnus X
    I'm setting up a log collection server for my Windows network (about 30 servers ranging from 2003 to 2008 R2, and about 300 vista/7 clients), and I was wondering which logs are good to collect and which ones are a waste of time. I'm going to collect the obvious ones (system, security, event, firewall, and role specific logs) but are there any others I should be worried about? I'm using Splunk if that helps answer the question.

    Read the article

  • How to output a simple network activity plot in console in Linux?

    - by Vi.
    There's tload that plots load average. There's iftop that network usage as bars. How to do something like this: # tcpdump -i eth0 --plot 'host 1.2.3.4' 13:45:03 | | 0 in 0 out 13:45:04 |O | 0 in 1MB out 13:45:05 |OOOI | 500 KB in 4MB out 13:45:06 |OIIII | 6MB in 1MB out 13:45:07 | | 0 in 0 out 13:45:08 |IIIIIIIIIIII | 53M in 0 out

    Read the article

  • Limiting network throughput of an already launched process ? (Linux/FreeBSD)

    - by jbdenis
    Hello everybody, is there any utility to limit the network throughput of a process after it has been launched ? Simple example: you note that a user takes all your upload bandwidth using scp and you'd like to limit the rate or decrease the priority of the transfer. I guess i could use a combination of iptables/tc or pf to achieve that, but i was wondering if there is a "one-shot" tool available (like tickle with a --pid option ^^) ? Regards, Jean-Baptiste

    Read the article

  • Atheros Wireless card shows up as two different models?

    - by geermc4
    Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

    Read the article

  • WDS 2008 R2 DHCP Error

    - by scampbell
    Im having a problem where I get the error 'An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment' when booting from a standard WDS boot.wim image taken from a Windows 7 DVD. I am using Server 2008 R2 and am adding the drivers to the boot using WDS, but also have the problem if the drivers are injected beforehand using DISM. When the error occurs I can shift + F10 and IPCONFIG and see it HAS picked up an internal IP from DHCP. Seems maybe it is timing out before it gets the IP? DHCP server is not on the WDS box but is in the same subnet. As per some fixes I have read I enabled RSTP on my switches but that didnt help. I have included the end of setupact.log to see if any of you have any ideas. Seems to be failing but as I say, the network IS initialized as I can see the internal IP assigned by DHCP when running IPCONFIG. I dont suppose theres any way of increasing the timeout? Thanks. 2011-04-11 17:26:31, Info [0x0b0022] WDS StartNetworking: Trying to start networking. 2011-04-11 17:26:31, Info WDS Network service dhcp not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service lmhosts not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service lanmanworkstation not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service bfe not running or could not be queried: 264e18 1 1 2011-04-11 17:26:31, Info WDS Network service ikeext not running or could not be queried: 264d00 1 1 2011-04-11 17:26:31, Info WDS Network service mpssvc not running or could not be queried: 264e18 1 1 2011-04-11 17:27:24, Info WDS Installing device pci\ven_14e4&dev_1691&subsys_04aa1028 X:\WINDOWS\INF\oem37.inf succeeded 2011-04-11 17:27:25, Info WDS No computer name specified, generating a random name. 2011-04-11 17:27:25, Info WDS Renaming computer to MININT-VN2P876. 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Service winmgmt disable: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt stop: 0x00000000 2011-04-11 17:27:25, Info WDS Service winmgmt enable: 0x00000000 2011-04-11 17:27:25, Info WDS Released profiling mutex 2011-04-11 17:27:25, Info WDS Acquired profiling mutex 2011-04-11 17:27:25, Info WDS Install MS_MSCLIENT: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_NETBIOS: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_SMB: 0x0004a020 2011-04-11 17:27:25, Info WDS Install MS_TCPIP6: 0x0004a020 2011-04-11 17:27:26, Info WDS Install MS_TCPIP: 0x0004a020 2011-04-11 17:27:26, Info WDS Service dhcp start: 0x00000000 2011-04-11 17:27:26, Info WDS Service lmhosts start: 0x00000000 2011-04-11 17:27:26, Info WDS Service ikeext start: 0x00000000 2011-04-11 17:27:26, Info WDS Service mpssvc start: 0x00000000 2011-04-11 17:27:26, Info WDS Released profiling mutex 2011-04-11 17:27:26, Info WDS Spent 967ms installing network components 2011-04-11 17:27:28, Info WDS Spent 2247ms installing network drivers 2011-04-11 17:27:38, Info WDS QueryAdapterStatus: no operational adapters found. 2011-04-11 17:27:38, Info WDS Spent 10140ms confirming network initialization; status 0x80004005 2011-04-11 17:27:38, Info WDS WaitForNetworkToInitialize failed; ignoring error 2011-04-11 17:27:38, Info WDS GetNetworkingInfo: WpeNetworkStatus returned [0x0]. Flags set: 2011-04-11 17:27:38, Error [0x0b003f] WDS StartNetworking: Failed to start networking. Error code [0x800704C6].[gle=0x000000cb] 2011-04-11 17:27:38, Info [0x0640ae] IBSLIB PublishMessage: Publishing message [WdsClient: An error occurred while obtaining an IP address from the DHCP server. Please check to ensure that there is an operational DHCP server on this network segment.]

    Read the article

  • Boot From a USB Drive Even if your BIOS Won’t Let You

    - by Trevor Bekolay
    You’ve always got a trusty bootable USB flash drive with you to solve computer problems, but what if a PC’s BIOS won’t let you boot from USB? We’ll show you how to make a CD or floppy disk that will let you boot from your USB drive. This boot menu, like many created before USB drives became cheap and commonplace, does not include an option to boot from a USB drive. A piece of freeware called PLoP Boot Manager solves this problem, offering an image that can burned to a CD or put on a floppy disk, and enables you to boot to a variety of devices, including USB drives. Put PLoP on a CD PLoP comes as a zip file, which includes a variety of files. To put PLoP on a CD, you will need either plpbt.iso or plpbtnoemul.iso from that zip file. Either disc image should work on most computers, though if in doubt plpbtnoemul.iso should work “everywhere,” according to the readme included with PLoP Boot Manager. Burn plpbtnoemul.iso or plpbt.iso to a CD and then skip to the “booting PLoP Boot Manager” section. Put PLoP on a Floppy Disk If your computer is old enough to still have a floppy drive, then you will need to put the contents of the plpbt.img image file found in PLoP’s zip file on a floppy disk. To do this, we’ll use a freeware utility called RawWrite for Windows. We aren’t fortunate enough to have a floppy drive installed, but if you do it should be listed in the Floppy drive drop-down box. Select your floppy drive, then click on the “…” button and browse to plpbt.img. Press the Write button to write PLoP boot manager to your floppy disk. Booting PLoP Boot Manager To boot PLoP, you will need to have your CD or floppy drive boot with higher precedence than your hard drive. In many cases, especially with floppy disks, this is done by default. If the CD or floppy drive is not set to boot first, then you will need to access your BIOS’s boot menu, or the setup menu. The exact steps to do this vary depending on your BIOS – to get a detailed description of the process, search for your motherboard’s manual (or your laptop’s manual if you’re working with a laptop). In general, however, as the computer boots up, some important keyboard strokes are noted somewhere prominent on the screen. In our case, they are at the bottom of the screen. Press Escape to bring up the Boot Menu. Previously, we burned a CD with PLoP Boot Manager on it, so we will select the CD-ROM Drive option and hit Enter. If your BIOS does not have a Boot Menu, then you will need to access the Setup menu and change the boot order to give the floppy disk or CD-ROM Drive higher precedence than the hard drive. Usually this setting is found in the “Boot” or “Advanced” section of the Setup menu. If done correctly, PLoP Boot Manager will load up, giving a number of boot options. Highlight USB and press Enter. PLoP begins loading from the USB drive. Despite our BIOS not having the option, we’re now booting using the USB drive, which in our case holds an Ubuntu Live CD! This is a pretty geeky way to get your PC to boot from a USB…provided your computer still has a floppy drive. Of course if your BIOS won’t boot from a USB it probably has one…or you really need to update it. Download PLoP Boot Manager Download RawWrite for Windows Similar Articles Productive Geek Tips Create a Bootable Ubuntu 9.10 USB Flash DriveReinstall Ubuntu Grub Bootloader After Windows Wipes it OutCreate a Bootable Ubuntu USB Flash Drive the Easy WayBuilding a New Computer – Part 3: Setting it UpInstall Windows XP on Your Pre-Installed Windows Vista Computer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • Unable to Mange DNS via MMC

    - by IT Helpdesk Team Manager
    When trying to access the DNS service on Microsoft Windows Server 2003 (Build 3790) domain controller/schema master via the MMC DNS snap in or locally via the DNS MMC from Administrative tools I'm getting a red "X" through the icon for the DNS Server. The inability to access DNS management via MMC happens on all domain controllers as well. We've looked at items such as the DHCP client not being started, incorrect DNS setup ( the machine points at itself and another DC ), the DNS service not running ( it is and all DNS queries via NSLOOKUP work correctly ), dslint returns the correct information and functions as expected. There is the following entry in the DNS event log: The DNS server could not initialize the remote procedure call (RPC) service. If it is not running, start the RPC service or reboot the computer. The event data is the error code. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. 0000: 0000051b dnscmd fails with RPC server unavailable yet RPC is started: C:\Documents and Settings\Administrator.DOMAIN>dnscmd /Info Info query failed status = 1722 (0x000006ba) Command failed: RPC_S_SERVER_UNAVAILABLE 1722 (000006ba) DCDIAG /TEST:DNS /V /E produces the following errors: Warning: no DNS RPC connectivity (error or non Microsoft DNS server is running) [Error details: 1753 (Type: Win32 - Description: There are no more endpoints available from the endpoint mapper.)] Warning: no DNS RPC connectivity (error or non Microsoft DNS server is running) [Error details: 1722 (Type: Win32 - Description: The RPC server is unavailable.)] The DNS server could not initialize the remote procedure call (RPC) service. If it is not running, start the RPC service or reboot the computer. The event data is the error code. A DNS query for _ldap._tcp.dc._msdcs. returns the correct results. All domain and ADS related activities are working except that I can't manage my DNS via MMC or dnscmd. Any thoughts or solutions would be greatly appreciated. EDIT: Adding Registry export per request: Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc Class Name: <NO CLASS> Last Write Time: 10/18/2012 - 2:29 PM Value 0 Name: DCOM Protocols Type: REG_MULTI_SZ Data: ncacn_ip_tcp Value 1 Name: UuidSequenceNumber Type: REG_DWORD Data: 0xb19bd0f Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\ClientProtocols Class Name: <NO CLASS> Last Write Time: 3/9/2007 - 12:11 PM Value 0 Name: ncacn_np Type: REG_SZ Data: rpcrt4.dll Value 1 Name: ncacn_ip_tcp Type: REG_SZ Data: rpcrt4.dll Value 2 Name: ncadg_ip_udp Type: REG_SZ Data: rpcrt4.dll Value 3 Name: ncacn_http Type: REG_SZ Data: rpcrt4.dll Value 4 Name: ncacn_at_dsp Type: REG_SZ Data: rpcrt4.dll Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\NameService Class Name: <NO CLASS> Last Write Time: 2/20/2006 - 4:48 PM Value 0 Name: DefaultSyntax Type: REG_SZ Data: 3 Value 1 Name: Endpoint Type: REG_SZ Data: \pipe\locator Value 2 Name: NetworkAddress Type: REG_SZ Data: \\. Value 3 Name: Protocol Type: REG_SZ Data: ncacn_np Value 4 Name: ServerNetworkAddress Type: REG_SZ Data: \\. Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\NetBios Class Name: <NO CLASS> Last Write Time: 2/20/2006 - 4:48 PM Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\RpcProxy Class Name: <NO CLASS> Last Write Time: 3/9/2007 - 12:11 PM Value 0 Name: Enabled Type: REG_DWORD Data: 0x1 Value 1 Name: ValidPorts Type: REG_SZ Data: pdc:100-5000 Key Name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\SecurityService Class Name: <NO CLASS> Last Write Time: 2/20/2006 - 4:48 PM Value 0 Name: 9 Type: REG_SZ Data: secur32.dll Value 1 Name: 10 Type: REG_SZ Data: secur32.dll Value 2 Name: 14 Type: REG_SZ Data: schannel.dll Value 3 Name: 16 Type: REG_SZ Data: secur32.dll Value 4 Name: 1 Type: REG_SZ Data: secur32.dll Value 5 Name: 18 Type: REG_SZ Data: secur32.dll Value 6 Name: 68 Type: REG_SZ Data: netlogon.dll

    Read the article

  • default outlook calendar update with holidays

    - by New IT Manager
    We are currently on a SBS2003 with exchange + outlook 2010 client environment. we have some developers working across 3 countries connected to the same domain however i would like all three country holidays to appear in everyone's default calendar. i did try several options synchronizing back to everyones calendar and well it was not so helpful. any thoughts would be much appreciated.. thanks in advance folds :)

    Read the article

  • Network authentication + roaming home directory - which technology should I look into using?

    - by Brian
    I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

    Read the article

  • MacBook Pro 10.6 losing dns service, network connection still functional if you know the ip address.

    - by Vincent
    MacBook pro connected to a wireless network (not sure about wired) I lose DNS. I still have a functioning connection and as long as I know the ip address of the website, server... for example skype works, ssh name@ipaddress, .... Things can be working properly and then just quit, Once I was im via skype and lost dns skype continued to work. This has happened in multiple locations on private and public networks. What does not work/fix it: Resetting router changing dns server on computer or router connecting to another network removing the airport interface and adding it back flushing dns The only solution seems to be a restart. A solution to this would be great, but any ideas of this to try would be great. Even a sure way to reproduce this would be useful. Maybe related question: But this is most definitely not true for me. "if I refresh enough -- 3 to 4 times --, it will usually pull up the site. " Here are some tests from terminal. Basically this confirms dns in not functioning vmd17:~ vmd$ ping google.com ping: cannot resolve google.com: Unknown host Trace route to google dns, This works vmd17:~ vmd$ /usr/sbin/traceroute -n -w 2 -q 2 -m 30 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 52 byte packets 1 192.168.1.1 5.195 ms 2.519 ms 2 67.172.136.1 31.881 ms 9.177 ms 3 68.85.107.121 12.168 ms 10.003 ms 4 68.86.103.41 12.021 ms 9.594 ms 5 68.86.91.1 16.712 ms 12.837 ms 6 68.86.86.210 29.951 ms 25.826 ms 7 68.86.87.218 29.554 ms 42.894 ms 8 75.149.231.70 68.271 ms 68.362 ms 9 72.14.233.77 141.178 ms 72.14.233.85 82.553 ms 10 72.14.238.243 83.381 ms 82.811 ms 11 72.14.232.213 194.387 ms 72.14.232.215 84.837 ms 12 209.85.253.145 100.294 ms * 13 8.8.8.8 101.689 ms 89.694 ms 208.67.222.22 is the ip address of opendns dns server vmd17:~ vmd$ dig @208.67.222.222 8.8.8.8 ; <<>> DiG 9.6.0-APPLE-P2 <<>> @208.67.222.222 8.8.8.8 ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached vmd17:~ vmd$ dig @208.67.222.222 gogle.com vmd17:~ vmd$ dig @208.67.222.222 google.com ; <<>> DiG 9.6.0-APPLE-P2 <<>> @208.67.222.222 google.com ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached vmd17:~ vmd$ dig @8.8.8.8 google.com ; <<>> DiG 9.6.0-APPLE-P2 <<>> @8.8.8.8 google.com ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached

    Read the article

  • Network update solutions for a company of ~20 (5 local, 15 remote)?

    - by Margaret
    Hi all This is probably going to be a bit up in the air, because we're still in the "reaching towards solutions" phase, but I figured I'd see what you guys had to say. Plus I honestly know very little about systems and what is good and bad pratice. My organisation has always more or less worked on the concept of local machines; since it primarily employed contractors who were working from home, each of those people was largely responsible for their own machine and backup procedures and the like. We're now expanding, though we're still reasonably small (we're up to about 20 staff members). Most people still work remotely, but we have a central office where about five people are working. But we're getting large enough that we're starting to think it would be a good idea to have a central file server, and things like that - if someone gets hit by a bus, we want someone else to know where to look for the files to continue their work. A lot of the people who work for us remotely work on projects for other companies as well, so I don't want to force them to log in to our server whenever they're on a network. But I do want to make connection to be as painless as possible to do so, to improve utilisation. The other thing is that we're getting more people who would like to remote into the office server and do their work there. Our current remote connection application is an SSH install that allows people access to the network; the problem is, it's a black box to me, and I've never understood how to even connect to it (despite supposedly being de facto sysadmin). Thus far I've been able to bounce questions about how to get it working to the guy who does know it well, but he's leaving the company soon. So we probably need a solution for this that I actually understand. We were knocking around the idea of implementing a VPN with some form of remote desktop, and someone mentioned that this was largely a matter of purchasing a router capable of it; I'm not sure of the truth of that statement. This is what we have in the office: Two shiny new i7 servers, each running Windows Server 2008. Precise eventual layout is still being debated, a little, but the current suggestion is that one is primary database crunching, while the other is a warm backup of the databases, along with running Reporting Services. They currently have SQL Server 2008 installed on them, which is being connected to via the 'sa' account. We're hoping to make each person use their own account (preferably one tied to the 'central' password we set up, so we can use Windows Authentication). An older server, running XP Pro, that we are currently using as a test bed for a project that requires access to older versions of software. This machine is also being used to take backups, but I'm thinking of moving that functionality elsewhere. A spare desktop from a guy who left the company (XP Pro). We're thinking of bumping up the hard disk space and using it as the magical file server that's going to solve one particular everything. Assorted desktops, laptops, etc, at least one for each person in the office (mix of Win XP and Win 7; occasionally a person who normally works remotely might drop in to the office and bring a laptop bearing Vista, but it's pretty rare). All are set up as local user accounts at the moment; I don't know if it's the best arrangement. Purchasing more hardware is not a big problem, but we figure we might as well make use of what we've got first. Is Active Directory a big magic wand that's going to solve all the world's problems? Is there some other arrangement we should be looking to instead?

    Read the article

  • Importing owl files

    - by Mikae Combarado
    Hello, I have a problem with importing owl files using owl api in Java. I successfully can import 2 owl files. However, a problem occurs, when I try to import 3 or more owl files that are integrated to each other. E.g. Base.owl -- base ontology Electronics.owl -- electronics ontology which imports Base.owl Telephone.owl -- telephone ontology which imports Base.owl and Electronics.owl When, I just import Base.owl and run Electronics.owl, it works smoothly. The code is given below: File fileBase = new File("filepath/Base.owl"); File fileElectronic = new File("filePath/Electronic.owl"); SimpleIRIMapper iriMapper = new SimpleIRIMapper(IRI.create("url/Base.owl"), IRI.create(fileBase)); OWLOntologyManager manager = OWLManager.createOWLOntologyManager(); manager.addIRIMapper(iriMapper); OWLOntology ont = manager.loadOntologyFromOntologyDocument(fileElectronic); However, when I want to load Telephone.owl, I just create an additional iriMapper and add it to the manager. The additional code is shown with ** : File fileBase = new File("filepath/Base.owl"); File fileElectronic = new File("filePath/Electronic.owl"); **File fileTelephone = new File("filePath/Telephone.owl");** SimpleIRIMapper iriMapper = new SimpleIRIMapper(IRI.create("url/Base.owl"), IRI.create(fileBase)); **SimpleIRIMapper iriMapper2 = new SimpleIRIMapper(IRI.create("url/Electronic.owl"), IRI.create(fileElectronic));** OWLOntologyManager manager = OWLManager.createOWLOntologyManager(); manager.addIRIMapper(iriMapper); **manager.addIRIMapper(iriMapper2);** OWLOntology ont = manager.loadOntologyFromOntologyDocument(**fileTelephone**); The code shown above gives this error : Could not load import: Import(url/Electronic.owl>) Reason: Could not loaded imported ontology: <url/Base.owl> Cause: null It would be really appreciated, if someone gives me a hand... Thanks in advance...

    Read the article

  • MySQL: Complex Join Statement involving two tables and a third correlation table

    - by Stephen
    I have two tables that were built for two disparate systems. I have records in one table (called "leads") that represent customers, and records in another table (called "manager") that are the exact same customers but "manager" uses different fields (For example, "leads" contains an email address, and "manager" contains two fields for two different emails--either of which might be the email from "leads"). So, I've created a correlation table that contains the lead_id and manager_id. currently this correlation table is empty. I'm trying to query the "leads" table to give me records that match either "manager" email field with the single "leads" email field, while at the same time ignoring fields that have already been added to the "correlated" table. (this way I can see how many leads that match have not yet been correlated.) Here's my current, invalid SQL attempt: SELECT leads.id, manager.id FROM leads, manager LEFT OUTER JOIN correlation ON correlation.lead_id = leads.id WHERE correlation.id IS NULL AND leads.project != "someproject" AND (manager.orig_email = leads.email OR manager.dest_email = leads.email) AND leads.created BETWEEN '1999-01-01 00:00:00' AND '2010-05-10 23:59:59' ORDER BY leads.created ASC; I get the error: Unknown column 'leads.id' in 'on clause' Before you wonder: there are records in the "leads" table where leads.project != "someproject" and leads.created falls between those dates. I've included those additional parameters for completeness.

    Read the article

< Previous Page | 235 236 237 238 239 240 241 242 243 244 245 246  | Next Page >