Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 24/1027 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Exchange 2010 Deployment Notes - ISA 2004 Server Issue

    - by BWCA
    An interesting ISA 2004 tidbit … While we were setting up our Exchange 2010 ActiveSync environment, we encountered a problem where we could not successfully telnet over port 443 from one of our ISA 2004 Servers to our Exchange 2010 Client Access Server Array. When we tried to telnet over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Could not open connection to the host on port 443: Connect failed” error message. Also, when we used portqry over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Error opening socket: 10065” and “No route to host” error messages. It was odd because we did not have any problems with using ping or tracert from the ISA Server to the Client Access Server Array and our firewall firewall policy was allowing 443 traffic to pass through. After some troubleshooting, we were able to telnet and use portqry over port 443 successfully if we stopped the Microsoft Firewall service on the ISA 2004 Server.  So, it was strictly a problem with ISA.  Eventually, we were able to isolate the problem to a ISA 2004 Server System Policy setting as shown below (to modify the System Policy, right-click Firewall Policy and click Edit System Policy). Under the Diagnostics Services – HTTP Connectivity verifiers Configuration Group, you need to enable the configuration group under the General tab to resolve the problem.  After we enabled the setting, we no longer had a problem.

    Read the article

  • VirtualBox Clone Root HD / Ubuntu / Network issue

    - by john.graves(at)oracle.com
    When you clone a root Ubuntu disk in VirtualBox, one thing that gets messed up is the network card definition.  This is because Ubuntu (as it should) uses UDEV IDs for the network device.  When you boot your new disk, the network device ID has changed, so it creates a new eth1 device.  Unfortunately, this conflicts with the VirtualBox network setup.  What to do? Boot the box (no network) Edit the /etc/udev/rules.d/70-persistent-net.rules Delete the eth0 line and modify the eth1 line to be eth0 --------- Example OLD ----------- # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x8086:0x100e (e1000) <-------------------- Delete these two lines SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:d8:8d:15", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x8086:0x100e (e1000) ---Modify the next line and change eth1 to be eth0 SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:89:84:98", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } ---------------------------------------- --------- Example NEW ----------- # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x8086:0x100e (e1000) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:89:84:98", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } ----------------------------------------

    Read the article

  • Issue tracking multiple domains with Google Analytics

    - by user359650
    I have 2 domains mydomain.com and mydomain.net which I'm trying to track with the same GA code. Here are the options I turned on: Subdomains of mydomain ON Examples: www.mydomain.com -and- apps.mydomain.com -and- store.mydomain.com Multiple top-level domains of mydomain ON Examples: mydomain.uk -and- mydomain.cn -and- mydomain.fr Which gave me the following code: _gaq.push(['_setAccount', 'UA-123456789-1']); _gaq.push(['_setDomainName', 'mydomain.com']); _gaq.push(['_setAllowLinker', true]); _gaq.push(['_trackPageview']); In this help page I read that _setDomainName must be changed for each domain which I did: -if you go to mydomain.net you get _gaq.push(['_setDomainName', 'mydomain.net']); -if you go to mydomain.com you get _gaq.push(['_setDomainName', 'mydomain.com']); When I generate traffic on both mydomain.dom and mydomain.net and watches GA push requests made with firebug I can see requests generated for both domains and the parameter called utmhn has the proper domain value (which matches that of _setDomainName and the browser address bar). However when I monitor the realtime statistics under Home->Real-Time->Overview I see pageviews for mydomain.net BUT NOT for mydomain.dom :( What am I missing to properly track both domains? PS: in the help page I mentioned they talk about setting up cross links which I didn't do for now as my understanding is that it shouldn't be needed to get what I'm trying to do to work. Also I want to mention that I do not have any tracking code for any of these 2 domains other than the one I mentioned.

    Read the article

  • Canonicalization issue regarding academic URL vs. blog URL

    - by user5395
    I'm sorry if what I am about to write is long-winded. I only wish to be clear. I am an academic in the scientific community. I maintain a web site for my research, teaching, and other professional activities. Until recently, the content for this site was hosted in a directory on my university department's own server. The address is of the typical form (universityname).edu/~(myusername) I decided that I wanted to use WordPress in order to host and manage my page. So I set up a WordPress.com blog and then replaced the index.html file in (universityname).edu/~(myusername) with a new one consisting of a single frame, containing the WordPress.com blog. Now when a user visits (universityname).edu/~(myusername), he or she sees the blog instead. This has been pretty nice because, even when the user clicks on links between pages or posts in the blog, the only thing showing up in the address bar of the browser is www.(universityname).edu/~(myusername), because the blog is constrained to a frame. However, the effect of this change on the search side of things has not been so kind to me. Before, when someone searched for my name in Google, the first result was always (universityname).edu/~(myusername). This is the most desirable outcome, for professional reasons. (Having my academic URL come up first suggests that I am an accredited professional, and not just some crank with a blog!) But now, Google seems to have canonicalized my web presence under the blog's WordPress.com address. It has completely forgotten about my academic URL and considers the WordPress.com address to be the best address representing me on the web. Unfortunately, WordPress.com doesn't support the canonical tag, so I can't tell the blog to advertise itself as my academic URL in the header. (It doesn't seem to help at all that I have used the WordPress.com dashboard to turn on no-indexing of the blog.) One obvious solution would be to use the departmental server to host my content again, and use a local installation of the WordPress platform. For reasons beyond my control, the platform will not be deployed on the departmental server at this time. Another solution would be to use shared hosting with WordPress.org support, because the WordPress.org platform does support the canonical tag (albeit via a plug-in). But this seems to usually require purchasing a domain name and other fees, and there is no guarantee that Google will listen to the canonical tag (it might use whatever domain name I end up with instead). Is there a way I can more cleverly integrate the WordPress.com blog into a page hosted on my department's server? Is there some PHP code I can write to retrieve the blog's contents in a way that Google won't treat as a link / "perceive" the blog? Please note: I am a PHP novice at best. I just feel there should be a simpler solution to all this, within the constraints of what I have described above. Thanks!

    Read the article

  • Solving security issue in PowerPivot for SharePoint and Power View

    - by Marco Russo (SQLBI)
    I just installed a brand new server (well, a virtual machine) with SharePoint 2010 SP1 and SQL Server 2012 RC0, including PowerPivot and Reporting Services / Power View. The server is joined to the domain I use in our development environment. I published a workbook in the PowerPivot Gallery and my user was immediately able to connect, browse and navigate data of the Excel workbook published by SharePoint. Moreover, I was able to open it in Power View. However, other users failed the connection. After...(read more)

    Read the article

  • need advice for small css issue [migrated]

    - by JaPerk14
    I have a small design problem in my css, and I'd like to know if someone could check it out for me. The design problem is in the rollover effect of my horizontal navigation. There seems to be some sort of added margin or padding, but I'm having trouble finding the problem in the css. I will paste the code I'm using below, so you can see for yourself. You won't be able to see the problem until you rollover the navigation list items. HTML: <div class="Horiznav"> <ul> <li id="active"><a href="#">Link #1</a></li> <li><a href="#">Link #2</a></li> <li><a href="#">Link #3</a></li> <li><a href="#">Link #4</a></li> <li><a href="#">Link #5</a></li> </ul> </div> CSS: .Horiznav { background: #1F00CA; border-top: solid 1px #fff; border-bottom: solid 1px #fff; } .Horiznav ul { font-family: Arial, Helvetica, sans-serif; font-weight: bold; color: #fff; text-Align: center; margin: 0; padding-top: 5px; padding-bottom: 5px; } .Horiznav ul li { display: inline; } .Horiznav ul li a { padding-top: 5px; padding-bottom: 5px; color: #fff; text-decoration: none; border-right: 1px solid #fff; } .Horiznav ul li a:hover { background: #16008D; color: #fff; } #active a { border-left: 1px solid #fff; }

    Read the article

  • How to handle compensation issue

    - by Ali
    I consider myself an expert Software Developer. Recently, I noticed my current company posted a new job through a recruting firm requiring half experience than I have and even lesser set of skills. However, they are offering the same salary as my current salary. When I joined my current company a year ago, they declined to pay my asking salary. My evaluations are good and there are critical projects in the pipeline where my involvement is crucial for their success. I'm little confused on how to handle this situation. I don't want to come across threatning or any thing like that.

    Read the article

  • Solving File Upload Cancel Issue

    - by Frank Nimphius
    In Oracle JDeveloper 11g R1 (I did not test 11g R2) the file upload component is submitted even if users click a cancel button with immediate="true" set. Usually, immediate="true" on a command button by-passes all modle updates, which would make you think that the file upload isn't processed either. However, using a form like shown below, pressing the cancel button has no effect in that the file upload is not suppressed. <af:form id="f1" usesUpload="true">        <af:inputFile label="Choose file" id="fileup" clientComponent="true"                 value="#{FileUploadBean.file}"  valueChangeListener="#{FileUploadBean.onFileUpload}">   </af:inputFile>   <af:commandButton text="Submit" id="cb1" partialSubmit="true"                     action="#{FileUploadBean.onInputFormSubmit}"/>   <af:commandButton text="cancel" id="cb2" immediate="true"/> </af:form> The solution to this problem is a change of the event root, which you can achieve either by setting i) partialSubmit="true" on the command button, or by surrounding the form parts that should not be submitted when the cancel button is pressed with an ii) af:subform tag. i) partialSubmit solution <af:form id="f1" usesUpload="true">      <af:inputFile .../>   <af:commandButton text="Submit" .../>   <af:commandButton text="cancel" immediate="true" partialSubmit="true" .../> </af:form> ii) subform solution <af:form id="f1" usesUpload="true">   <af:subform id="sf1">     <af:inputFile ... />     <af:commandButton text="Submit" ..."/>   </af:subform>   <af:commandButton text="cancel" immediate="true" .../> </af:form> Note that the af:subform surrounds the input form parts that you want to submit when the submit button is pressed. By default, the af:subform only submits its contained content if the submit issued from within.

    Read the article

  • Lubuntu wireless issue with Broadcom chipset

    - by Variant Web Solutions
    I'm a web dev that just started a new venture in buying wiped laptops in bulk and selling them at a low cost to lower income families that want a laptop that will simply preform and not become virus ridden and require constant maintenance, so naturally I opted for a linux distro and after some research, lubuntu was my top pick. I'm not a stranger to linux as all of my servers for my web dev business are linux, but I am however new to L/Ubuntu and I'm having some issues with both wifi (broadcom chipsets) on the 20 or so dells that I have right now, D800's, D810's and E5400's. Not sure if you can point me in a solid direction, I've scoured (and implemented) the suggestions on ask ubuntu and still coming up short. On one of the e5400's ( though they all seem to suffer the same errors) I got the following: [code]dell-latitude-e5400@dell-Latitude-E5400:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell-latitude-e5400@dell-Latitude-E5400:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe (rev 10) dell-latitude-e5400@dell-Latitude-E5400:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.5-1ubuntu1 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm nfc dell-latitude-e5400@dell-Latitude-E5400:~$ [/code]

    Read the article

  • TBXML parsing issue while the value cannot get in UILabel

    - by Dany
    In my app I'm using TBXML parser where I need to get a value from xml file and print it on the label. This is my xml file in server <gold> <price> <title>22 K Gold</title> </price> <price> <title>24 K Gold</title> </price> </gold> any my Viewcontroller.h looks like #import <UIKit/UIKit.h> #import "TBXML.h" @interface ViewController : UIViewController{ IBOutlet UILabel *lab; IBOutlet UILabel *lab1; TBXML *tbxml; } @end and my Viewcontrooler.m looks like - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view, typically from a nib. NSData *xmlData = [[NSData alloc]initWithContentsOfURL:[NSURL URLWithString:@"http://www.abcde.com/sample.xml"]]; tbxml = [[TBXML alloc]initWithXMLData:xmlData]; TBXMLElement * root = tbxml.rootXMLElement; if (root) { TBXMLElement * elem_PLANT = [TBXML childElementNamed:@"price" parentElement:root]; while (elem_PLANT !=nil) { TBXMLElement * elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; NSString *botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab.text=[NSString stringWithFormat:@"re %@", botanicalName]; elem_PLANT = [TBXML nextSiblingNamed:@"price" searchFromElement:elem_PLANT]; elem_BOTANICAL = [TBXML childElementNamed:@"title" parentElement:elem_PLANT]; botanicalName = [TBXML textForElement:elem_BOTANICAL]; lab1.text=[NSString stringWithFormat:@"re %@", botanicalName]; } } } I'm getting BAD_ACCESS thread. Am I missing anything?

    Read the article

  • Precise Touch Screen Dragging Issue: Trouble Aligning with the Finger due to Different Screen Resolution

    - by David Dimalanta
    Please, I need your help. I'm trying to make a game that will drag-n-drop a sprite/image while my finger follows precisely with the image without being offset. When I'm trying on a 900x1280 (in X [900] and Y [1280]) screen resolution of the Google Nexus 7 tablet, it follows precisely. However, if I try testing on a phone smaller than 900x1280, my finger and the image won't aligned properly and correctly except it still dragging. This is the code I used for making a sprite dragging with my finger under touchDragged(): x = ((screenX + Gdx.input.getX())/2) - (fruit.width/2); y = ((camera_2.viewportHeight * multiplier) - ((screenY + Gdx.input.getY())/2) - (fruit.width/2)); This code above will make the finger and the image/sprite stays together in place while dragging but only works on 900x1280. You'll be wondering there's camera_2.viewportHeight in my code. Here are for two reasons: to prevent inverted drag (e.g. when you swipe with your finger downwards, the sprite moves upward instead) and baseline for reading coordinate...I think. Now when I'm adding another orthographic camera named camera_1 and changing its setting, I recently used it for adjusting the falling object by meter per pixel. Also, it seems effective independently for smartphones that has smaller resolution and this is what I used here: show() camera_1 = new OrthographicCamera(); camera_1.viewportHeight = 280; // --> I set it to a smaller view port height so that the object would fall faster, decreasing the chance of drag force. camera_1.viewportWidth = 196; // --> Make it proportion to the original screen view size as possible. camera_1.position.set(camera_1.viewportWidth * 0.5f, camera_1.viewportHeight * 0.5f, 0f); camera_1.update(); touchDragged() x = ((screenX + (camera_1.viewportWidth/Gdx.input.getX()))/2) - (fruit.width/2); y = ((camera_1.viewportHeight * multiplier) - ((screenY + (camera_1.viewportHeight/Gdx.input.getY()))/2) - (fruit.width/2)); But the result instead of just following the image/sprite closely to my finger, it still has a space/gap between the sprite/image and the finger. It is possibly dependent on coordinates based on the screen resolution. I'm trying to drag the blueberry sprite with my finger. My expectation did not met since I want my finger and the sprite/image (blueberry) to stay close together while dragging until I release it. Here's what it looks like: I got to figure it out how to make independent on all screen sizes by just following the image/sprite closely to my finger while dragging even on most different screen sizes instead.

    Read the article

  • Model View Control Issue: Null Pointer Initialization Question [closed]

    - by David Dimalanta
    Good morning again. This is David. Please, I need an urgent help regarding control model view where I making a code that uniquely separating into groups: An Activity Java Class to Display the Interface A View and Function Java Class for Drawing Cards and Display it on the Activity Class The problem is that the result returns a Null Pointer Exception. I have initialize for the ID for Text View and Image View. Under this class "draw_deck.java". Please help me. Here's my code for draw_deck.java: package com.bodapps.inbetween.model; import android.content.Context; import android.view.View; import android.widget.ImageView; import android.widget.TextView; import com.bodapps.inbetween.R; public class draw_deck extends View { public TextView count_label; public ImageView draw_card; private int count; public draw_deck(Context context) { super(context); // TODO Auto-generated constructor stub //I have initialized two widgets for ID. I still don't get it why I got forced closed by Null Pointer Exception thing. draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); } public void draw(int s, int c, String strSuit, String strValue, Pile pile, Context context) { //super(context); //Just printing the card drawn from pile int suit, value = 1; draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); Card card; if(!pile.isEmpty()) //Setting it to IF statement displays the card one by one. { card = pile.drawFromPile(); //Need to check first if card is null. if (card != null) { //draws an extra if (card != null) { //Get suit of card to print out. suit = card.getSuit(); switch (suit) { case CardInfo.DIAMOND: strSuit = "DIAMOND"; s=0; break; case CardInfo.HEART: strSuit = "HEART"; s=1; break; case CardInfo.SPADE: strSuit = "SPADE"; s=2; break; case CardInfo.CLUB: strSuit = "CLUB"; s=3; break; } //Get value of card to print out. value = card.getValue(); switch (value) { case CardInfo.ACE: strValue = "ACE"; c=0; break; case CardInfo.TWO: c=1; break; case CardInfo.THREE: strValue = "THREE"; c=2; break; case CardInfo.FOUR: strValue = "FOUR"; c=3; break; case CardInfo.FIVE: strValue = "FIVE"; c=4; break; case CardInfo.SIX: strValue = "SIX"; c=4; break; case CardInfo.SEVEN: strValue = "SEVEN"; c=4; break; case CardInfo.EIGHT: strValue = "EIGHT"; c=4; break; case CardInfo.NINE: strValue = "NINE"; c=4; break; case CardInfo.TEN: strValue = "TEN"; c=4; break; case CardInfo.JACK: strValue = "JACK"; c=4; break; case CardInfo.QUEEN: strValue = "QUEEN"; c=4; break; case CardInfo.KING: strValue = "KING"; c=4; break; } } } }// //Below two lines of code, this is where issued the Null Pointer Exception. draw_card.setImageResource(deck[s][c]); count_label.setText(new StringBuilder(strValue).append(" of ").append(strSuit).append(String.valueOf(" " + count++)).toString()); } //Choice of Suits in a Deck public Integer[][] deck = { //Array Group 1 is [0][0] (No. of Cards: 4 - DIAMOND) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 2 is [1][0] (No. of Cards: 4 - HEART) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 3 is [2][0] (No. of Cards: 4 - SPADE) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 4 is [3][0] (No. of Cards: 4 - CLUB) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, }; } And this one of the activity class, Player_Mode_2.java: package com.bodapps.inbetween; import java.util.Random; import android.app.Activity; import android.app.Dialog; import android.content.Context; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.bodapps.inbetween.model.Card; import com.bodapps.inbetween.model.Pile; import com.bodapps.inbetween.model.draw_deck; /* * * Public class for Two-Player mode. * */ public class Player_Mode_2 extends Activity { //Image Views private ImageView draw_card; private ImageView player_1; private ImageView player_2; private ImageView icon; //Buttons private Button set_deck; //Edit Texts private EditText enter_no_of_decks; //text Views private TextView count_label; //Integer Data Types private int no_of_cards, count; private int card_multiplier; //Contexts final Context context = this; //Pile Model public Pile pile; //Card Model public Card card; //create View @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.play_2_player_mode); //-----[ Search for Views ]----- //Initialize for Image View draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); player_1 = (ImageView) findViewById(R.id.IV_Player_1_Card); player_2 = (ImageView) findViewById(R.id.IV_Player_2_Card); //Initialize for Text view or Label count_label = (TextView) findViewById(R.id.Text_View_Count_Card); //-----[ Adding Values ]----- //Integer Values count = 0; no_of_cards = 0; //-----[ Adding Dialog ]----- //Initializing Dialog final Dialog deck_dialog = new Dialog(context); deck_dialog.setContentView(R.layout.dialog); deck_dialog.setTitle("Deck Dialog"); //-----[ Initializing Views for Dialog's Contents ]----- //Initialize for Edit Text enter_no_of_decks = (EditText) deck_dialog.findViewById(R.id.Edit_Text_Set_Number_of_Decks); //Initialize for Button set_deck = (Button) deck_dialog.findViewById(R.id.Button_Deck); //-----[ Setting onClickListener() ]----- //Set Event Listener for Image view draw_card.setOnClickListener(new Draw_Card_Model()); //Set Event Listener for Setting the Deck set_deck.setOnClickListener(new OnClickListener() { public void onClick(View v) { if(card_multiplier <= 8) { //Use "Integer.parseInt()" method to instantly convert from String to int value. card_multiplier = Integer.parseInt(enter_no_of_decks.getText().toString()); //Shuffling cards... pile = new Pile(card_multiplier); //Multiply no. of decks //Dismiss or close the dialog. deck_dialog.dismiss(); } else { Toast.makeText(getApplicationContext(), "Please choose a number from 1 to 8.", Toast.LENGTH_SHORT).show(); } } }); //Show dialog. deck_dialog.show(); } //Shuffling the Array public void Shuffle_Cards(Integer[][] Shuffle_Deck) { Random random = new Random(); for(int i = Shuffle_Deck[no_of_cards].length - 1; i >=0; i--) { int Index = random.nextInt(i + 1); //Simple Swapping Integer swap = Shuffle_Deck[card_multiplier-1][Index]; Shuffle_Deck[card_multiplier-1][Index] = Shuffle_Deck[card_multiplier-1][i]; Shuffle_Deck[card_multiplier-1][i] = swap; } } //Private Class for Random Card Draw private class Draw_Card_Model implements OnClickListener { public void onClick(View v) { //Just printing the card drawn from pile int suit = 0, value = 0; String strSuit = "", strValue = ""; draw_deck draw = new draw_deck(context); //This line is where issued the Null Pointer Exception. if (count == card_multiplier*52) { // A message shows up when all cards are draw out. Toast.makeText(getApplicationContext(), "All cards have been used up.", Toast.LENGTH_SHORT).show(); draw_card.setEnabled(false); } else { draw.draw(suit, value, strSuit, strValue, pile, context); count_label.setText(count); //This is where I got force closed error, although "int count" have initialized the number. This was supposed to accept in the setText() method. count++; } } } } Take note that the issues on Null Pointer Exception is the Image View and the Edit Text. I got to test it. Thanks. If you have any info about my question, let me know it frankly.

    Read the article

  • Google Fetch issue

    - by Karen
    When I do a Google fetch on any of my webpages the results are all the same (below). I'm not a programmer but I'm pretty sure this is not correct. Out of all the fetches I have done only one was different and the content length was 6x below and showed meta tags etc. Maybe this explains other issues I've been having with the site: a drop in indexed pages. Meta tag analyzer says I have no title tag, meta tags or description even though I do it on all pages. I had an SEO team working on the site and they were stumped by why pages were not getting indexed. So they figure it was some type of code error. Are they right? HTTP/1.1 200 OK Cache-Control: private Content-Type: text/html; charset=utf-8 Content-Encoding: gzip Vary: Accept-Encoding Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Thu, 11 Oct 2012 11:45:41 GMT Content-Length: 1054 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title></title> <script type="text/javascript"> function getCookie(cookieName) { if (document.cookie.length > 0) { cookieStart = document.cookie.indexOf(cookieName + "="); if (cookieStart != -1) { cookieStart = cookieStart + cookieName.length + 1; cookieEnd = document.cookie.indexOf(";", cookieStart); if (cookieEnd == -1) cookieEnd = document.cookie.length; return unescape(document.cookie.substring(cookieStart, cookieEnd)); } } return ""; } function setTimezone() { var rightNow = new Date(); var jan1 = new Date(rightNow.getFullYear(), 0, 1, 0, 0, 0, 0); // jan 1st var june1 = new Date(rightNow.getFullYear(), 6, 1, 0, 0, 0, 0); // june 1st var temp = jan1.toGMTString(); var jan2 = new Date(temp.substring(0, temp.lastIndexOf(" ") - 1)); temp = june1.toGMTString(); var june2 = new Date(temp.substring(0, temp.lastIndexOf(" ") - 1)); var std_time_offset = (jan1 - jan2) / (1000 * 60 * 60); var daylight_time_offset = (june1 - june2) / (1000 * 60 * 60); var dst; if (std_time_offset == daylight_time_offset) { dst = "0"; // daylight savings time is NOT observed } else { // positive is southern, negative is northern hemisphere var hemisphere = std_time_offset - daylight_time_offset; if (hemisphere >= 0) std_time_offset = daylight_time_offset; dst = "1"; // daylight savings time is observed } var exdate = new Date(); var expiredays = 1; exdate.setDate(exdate.getDate() + expiredays); document.cookie = "TimeZoneOffset=" + std_time_offset + ";"; document.cookie = "Dst=" + dst + ";expires=" + exdate.toUTCString(); } function checkCookie() { var timeOffset = getCookie("TimeZoneOffset"); var dst = getCookie("Dst"); if (!timeOffset || !dst) { setTimezone(); window.location.reload(); } } </script> </head> <body onload="checkCookie()"> </body> </html>

    Read the article

  • Units issue when exporting from 3DS Max to XNA

    - by miguelSantirso
    I am working on a XNA game where we have defined that 1 XNA unit equals to 1 meter. Then, I set meters as system unit in 3DS Max and set to meters the units in the FBX exporter. However, when I export my models, they are much bigger in the game. Am I missing something? What should I do to avoid problems with my units? Investigating the FBX file, I noticed that I it has two values called UnitScaleFactor and OriginalUnitScaleFactor. They both are 100 when I export the files... And if I manually change UnitScaleFactor to 1, it works fine :S

    Read the article

  • apt-get issue after upgrading to 12.04

    - by user83906
    I have recently upgraded my cluster from 11.10 to 12.04. After the upgrade, I am having trouble running apt-get on the cluster nodes. I can ssh between the nodes (client-to-client; client-to-head; client-to-external etc.). However, sudo apt-get update produces the following errors: Ign http://us.archive.ubuntu.com precise InRelease Ign http://security.ubuntu.com precise-security InRelease Ign http://www.openfoam.org maverick InRelease Ign http://us.archive.ubuntu.com precise-updates InRelease Err http://security.ubuntu.com precise-security Release.gpg Something wicked happened resolving 'security.ubuntu.com:http' (-5 - No address associated with hostname) Err http://www.openfoam.org maverick Release.gpg Something wicked happened resolving 'www.openfoam.org:http' (-5 - No address associated with hostname) Ign http://us.archive.ubuntu.com precise-backports InRelease Ign http://www.openfoam.org maverick Release Ign http://security.ubuntu.com precise-security Release Err http://us.archive.ubuntu.com precise Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/main Sources/DiffIndex Err http://us.archive.ubuntu.com precise-updates Release.gpg Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname) Ign http://security.ubuntu.com precise-security/restricted Sources/DiffIndex 15% [Connecting to us.archive.ubuntu.com] [Connecting to security.ubuntu.com] [Connecting to www.openfoam.org] On the headnode, I have in /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.1/24 On the client nodes, I have /etc/network/iterfaces: auto eth0 iface eth0 inet static address 192.168.0.101 netmask 255.255.255.0 gateway 192.168.0.1 Please advise.

    Read the article

  • Job Search Engine Url Structure Issue [closed]

    - by Justin
    Possible Duplicate: What is the best stucture of SEO friendly URL? I am working on a job board, and i'm trying to figure out a good design for URL structure. Some things that I have found through research: 100 - 150 Chars long is ideal 3-5 words in your url, according to Matt Cutts Use .htaccess to force clean urls Do not duplicate data (important) Clean and precise, describing the content Use hyphens On the homepage, I try to detect the users location based on IP, but this isn't always accurate, and not always reliable. So until they put in their city/location, I can't always use this structure but this is potentially work-able. For Searching, a form post to a results page: domain.com/jobs/[city]/[search] ie: domain.com/jobs/toronto/sales manager/ OR domain.com/search/jobs/toronto/sales manager/ or do I remove the word JOBS and just use Search. I trying to keep good search terms in the URL, but also keep it clean and concise. Can someone give me some feedback and thoughts to 'why'...

    Read the article

  • Iptables Issue can't SSH Remote Machines

    - by Lonston
    I want to SSH to 192.168.1.15 Server from my machine, my ip was 192.168.1.99 Source Destination was UP, with IP 192.168.1.15. This is LAN Network there are 30 Machine's Connected to the network and working fine, I'm Playing around the local machine's cos i need to apply the same rules in Production VPS I have applied the below iptables in my machine 192.168.1.99, Now i can't receive any packets from Outside and i can't send any packets Outside, While applying the Below Chain iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP After the above CHAIN i have added the Below rules and it want to allow ssh from machine to 192.168.1.15 to access the 192.164.1.15 but still i can't access 192.168.1.15 iptables -A INPUT -p tcp -i eth0 --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -p tcp -o eth0 --sport 22 -m state --state ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --sport 22 -m state --state ESTABLISHED -j ACCEPT Any one Please Check Weather my Rules are Wrigt. Still i can't access the machine 15

    Read the article

  • Microsoft LifeCam Audio Issue

    - by Daniel Samson
    Running Ubuntu 12.04.1 LTS 32-bit on a computer with an Intel core i5 processor, 4GB RAM and a NVIDIA 450GTS Graphics card. I am trying to set up Skype with my webcam. So far everything works almost perfectly, however my Microsoft LifeCam-VX700 v2.0 audio does not work correctly. The audio feed is just static/white noise. I have checked the hardware using windows and it worked perfectly there. The video works great in Ubuntu. It is just the audio that is the problem. What can I do to rectify this problem?

    Read the article

  • Serious Forum Design Issue

    - by John
    I want to launch a school forum for a country. I'm in dilemma as to how to design this forum. Country will have many states, each state will have cities, each city will have many schools. Each school will have many classes( 1st - 12th). It looks like this: States - Cities - Schools - Classes I want to make each class as forum. Now the biggest problems are two fold: If I were to list even 1000 schools it will create huge number of forums and I don't think forum softwares(PHPBB, MyBB) are designed to support these many Secondly creating and maintaining huge forums is also very difficult. Ideally I'd like to duplicate existing forum hierarchy to new one. I've done lot of search and I've found that such type of forums are infeasible and such designs don't work. Leave alone the fact the nobody uses such a forum. Keeping in mind this, how should I go about designing this forum?

    Read the article

  • Graphic issue on intel945 chipset

    - by peeyush tiwari
    I used Intrepid(8.10) and my graphics used to work fine with compiz effects and all(on better resolution than 1024x768).Now I have upgraded to Precise(12.04)but I use gnome classic(with compiz effects)as my desktop but the compiz effects seem not to work, only unity 2D works. When I ran lshw -c video it gives: *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fea40000-fea7ffff Sysinfo shows: Display Resolution 1024x768 pixels OpenGL Renderer Gallium 0.4 on llvmpipe(LLVM 0x300) X11 Vendor The X.Org Foundation On SystemSettings: Memory 993.3 MiB Processor Intel® Pentium(R) 4 CPU 2.40GHz Graphics VESA: Intel(r) 82945G Chipset Family Graphics OS type 32-bit glxgears output comes to be around 100fps which used to be around 900fps in Intrepid

    Read the article

  • Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

    - by Gaurav_Java
    I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

    Read the article

  • wild card redirects issue giving error this webpage has a redirect loop

    - by kath
    In my website I changed or better word modified the directory name ""vehicles-cars"" to ""vehicles-cars-for-sale"" when i tryed to redirect using wild card redirect my old directory name to new directory name in my web hosting cpanel account. every time when i open pages from that directory i am getting error code this webpage has a redirect loop the website is php the problem is that that my lots of pages from old directory are indexed in googles and they are getting duplicate contents i really need some advice what to do with this problem here is .htaccess file code for redirect thanks RewriteEngine on RewriteCond %{HTTP_HOST} ^adsbuz\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.adsbuz\.com$ RewriteRule ^vehicles\-cars\/?(.*)$ "http\:\/\/adsbuz\.com\/vehicles\-cars\-for\-sale\/$1" [R=301,L]

    Read the article

  • Ubuntu 12.04 resolution issue ATI radeon x1600

    - by JP Hellemons
    I have a brand new Ubuntu 12.04 installation, but my resolution is set to 800*600 4:3 and my resolution using windows xp is 1440*900 but that option is unavailable for me. When I search for restricted drivers, there are none. So I searched the ati website and downloaded a .run file of about 80 mb. but that gave me an error when I tried to open it. I downloaded some fglrx thing from the repositories and now there are some widescreen options available but still no 1440*900 there is some ATI controlpanel installed, but when I try to open it, it fails telling me that there is now suitable driver. ps. my video card is a 512MB ATI Radeon Sapphire X1600 AGP

    Read the article

  • Issue with a point coordinates, which creates an unwanted triangle

    - by Paul
    I would like to connect the points from the red path, to the y-axis in blue. I figured out that the problem with my triangles came from the first point (V0) : it is not located where it should be. In the console, it says its location is at 0,0, but in the emulator, it is not. The code : for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } The output : _polyVertices[i-1].x : 0.000000, _polyVertices[i-1].y : 0.000000 _polyVertices[i].x : 50.000000, _polyVertices[i].y : 0.000000 And the result : (the layer goes up, i could not take the screenshot before the layer started to go up, but the first red point starts at y=0) : Then it creates an unwanted triangle when the code continues : Would you have any idea about this? (So to force the first blue point to start at 0,0, and not at 50,0 as it seems to be now) Here is the code : - (void)generatePath{ float x = 50; //first red point float y = 0; for(int i = 0; i < kMaxKeyPoints+1; i++) { if (i<3){ _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<20){ //going right _hillKeyPoints[i] = CGPointMake(x, y); x += (random() % (int) 30); y += -40; } else if(i<25){ //stabilize _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } else if(i<30){ //going left _hillKeyPoints[i] = CGPointMake(x, y); //x -= (random() % (int) 10); x = 150 + (random() % (int) 30); y += -40; } else { //back to normal _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += -40; } } } -(void)generatePolygons{ static int prevFromKeyPointI = -1; static int prevToKeyPointI = -1; // key points interval for drawing while (_hillKeyPoints[_fromKeyPointI].y > -_offsetY+winSizeTop) { _fromKeyPointI++; } while (_hillKeyPoints[_toKeyPointI].y > -_offsetY-winSizeBottom) { _toKeyPointI++; } if (prevFromKeyPointI != _fromKeyPointI || prevToKeyPointI != _toKeyPointI) { _nPolyVertices = 0; float x1 = 0; int keyPoints = _fromKeyPointI; for (int i=_fromKeyPointI; i<_toKeyPointI; i++){ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); //first blue point _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //CCLOG(@"_nPolyVertices V2 again : %i", _nPolyVertices); //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } prevFromKeyPointI = _fromKeyPointI; prevToKeyPointI = _toKeyPointI; } } - (void) draw { //RED glColor4f(1, 1, 1, 1); for(int i = MAX(_fromKeyPointI, 1); i <= _toKeyPointI; ++i) { glColor4f(1.0, 0, 0, 1.0); ccDrawLine(_hillKeyPoints[i-1], _hillKeyPoints[i]); } //BLUE glColor4f(0, 0, 1, 1); for(int i = 1; i < 2; i++) { CCLOG(@"_polyVertices[i-1].x : %f, _polyVertices[i-1].y : %f", _polyVertices[i-1].x, _polyVertices[i-1].y); CCLOG(@"_polyVertices[i].x : %f, _polyVertices[i].y : %f", _polyVertices[i].x, _polyVertices[i].y); ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } } Thanks

    Read the article

  • On dual-boot iMac, after fixing "EFI Boot" issue, will booting Windows cause the same issue again?

    - by Shane
    On my dual-boot iMac, after fixing the well-known "EFI Boot" issue, will booting Windows cause the same issue again? I'm hesitant to try booting Windows until I hear from others. Details: It all started when I had been working in Windows and then re-booted into Mac OSX Snow Leopard. Any attempt to boot into OSX would result in two giveaway symptoms: 1) The MAC HD was re-named "EFI Boot", and 2) a gray progress bar stopped at 10% and the spinning wheel kept spinning - no joy. Many articles on Mac Forums describe the same thing, including the fix, which is to erasing the damaged partition and either: a) re-install the OS from DVD, or b) perform a Time Machine RESTORE (which I did). Is there anything I can do to keep enjoying the benefits of a dual-boot iMac without fear of a repeat problem and associated 2-hour restore from Time Machine?

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >