Search Results

Search found 60319 results on 2413 pages for 'display name'.

Page 24/2413 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Ubuntu not detecting second monitor

  - by Julian Le Saux

  I'm running Ubuntu 12.04 on a Lenovo x61s Thinkpad. As the screen's rather small and I want to do some video editing, I thought I'd plug in a monitor and use that. The monitor is Relisys JM777 (quite old). When I plug it into my other computer, which is running Windows 7, it immediately mirrors the display; but when plugged into the Lenovo the monitor screen remains blank. The graphics card on the Lenovo is a "VGA compatible controller" according to SysInfo. Anybody got any suggestions? I'm quite new to Linux, so simple explanations would be greatly appreciated. The contents of my Xorg.0.log file can be seen at http://paste.ubuntu.com/1009855/ .

  Read the article

• Adjust resolution in xfce4 virtualbox guest guest

  - by David

  I have Virtualbox 4.1.2_ubuntur3859 installed on an Ubuntu 11.10 host, running a guest ubuntu server 10.04 with xfce4 and xorg installed with no-install-recommends. I have installed guest additions, but the maximum resolution in the display settings is 800x600. I have read related questions: How to change resolution of the VirtualBox (Ubuntu guest and host)? Higher screen resolution in VirtualBox? upgrading VirtualBox 3.2.10 breaks my guest Ubuntu screen resolution Ubuntu as guest OS (with Vista host) stuck at 800x600 resolution but none contain the solution to my issue. Am I missing any particular packages that would allow me to change resolution? I would like to keep the machine as small as possible.

  Read the article

• Screen Corruption in half the screen only

  - by Guy DAmico

  About 50% of the my NATTY desktop screen is corrupted. Once that happens I can re-boot as many times as I want but the problem continues. If I logout and then into WINDOWS for a day I may be successful and boot UBUNTU with a good screen. The desktop is formatted correctly, there's no pixelation, rather there is a fine grained white crosshatch pattern covering the entire screen. If I open any application the screen corruption worsens eventually to the point I can no longer make out anything. I ran ram memory test w/o any errors. I have no display issues when running WINDOWS 7. Any ideas. My computer is a Dual Boot stock DELL 5150 w/3gig of ram an on board video.

  Read the article

• Monitor resolution messed up, monitor is unknown.

  - by Kaustubh P

  Is there anyway to reset my monitor? My moitor is using the xorg.conf file. I use 10.04, without any Graphics Card. My monitor is an Acer X193W, with a native resolution of 1440x900. This is my xorg.conf file: Section "Screen" Identifier "Configured Screen Device" Device "Configured Video Device" Monitor "Test" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1440x900_60.00" EndSubSection EndSection #Section "Device" # Identifier "Configured Video Device" # HorizSync # VertRefresh #EndSection I still cant view the native resolution, even when defined in the xorg file. An way I can revert to the default, or delete some files, to make the system detect the monitor again? My last resort is the cvt method, and adding it to the xrandr file. EDIT: I use Intel Drivers. My /proc/fb contains 0 VGA16 VGA

  Read the article

• Ubuntu 12.04 "Do nothing" when "lid closed" blanks out external monitor

  - by Elijah Lynn

  This is not the same as this question. I have Ubuntu 12.04 running with an Nvidia card on a W510 Thinkpad. I have one external monitor connected. When I change the power settings to "Do nothing" when "Lid closed" it still keeps the system running which is great. However, it blanks out the display on any external monitors making the system useless. I plan on getting a dock soon and having to identical resolution monitors and would love to be able to dock the monitor and work as normal on the external monitors. Does anyone have a suggestion or fix for this? Should I report this as a bug or feature request?

  Read the article

• Ubuntu 12.10 "Turn screen off when inactive for: Never" still turns off

  - by Will

  After a fresh install of Ubuntu 12.10, my screen still goes off after about ten minutes. I've been to the Brightness and Lock control panel. The Turn screen off when inactive for: setting is set for Never. I've been through the dconf Editor searching for power, screen, and idle changing parameters. This doesn't seem to have any effect on the display timeout. Here's one more interesting thing, the screen doesn't go off, per se. It just goes black. Meaning, the back lighting is still on, and all the pixels are black. When it goes black, it does a very pleasant quick dim to black. Similarly, it quickly un-dim's after a key press, mouse movement, or mouse click. So, I'm feeling this is more of a software setting the timeout, not a power saving function.

  Read the article

• Screen has 1px vertical dead area on the right side

  - by pileofrocks

  Meaning that I can not click anything on that 1px vertical area (such as scrollbars). Illustration (purple = screen, black = the dead area): I am thinking Compiz has to be the main suspect, especially as on a guest account, this problem does not exist. I have a dual-monitor setup and this does not happen on the 2nd screen. However, turning off the 2nd display does not make any difference. I had this issue already before upgrading to 13.10 and while doing that, I also resetted all Compiz settings and re-loaded my profile configuration file. I have tried disabling all Compiz plugins under "Window Management" What next?

  Read the article

• Dimming the backlight is irreversible on a Samsung Q210 notebook, what do I do?

  - by user27304

  I'm new to the community, although I have been using Ubuntu since 2010. I have a Samsung Q210 notebook; Specs: Intel® Core™2 Duo CPU P8400 @ 2.26GHz × 2 4 Gigs RAM Nvidia 9200m GS (although system information in Ubuntu doesn't know) 194 GB HD OS: Ubuntu 11.10 Kernel is 3.0.0-12-generic-pae Although Samsung seems to be infamous for problems with Ubuntu, after upgrading to Oneiric, finally the FN Brightness Buttons are recognized. The only problem is, after dimming the backlight for a fixed amount of steps (3 or 4, I dare not count now because that would mean rebooting because I can't see anything), the display goes completely dark and using the FN buttons to brighten the backlight does not work anymore (before reaching that threshold, going brighter after dimming works). Now what do I do? File a bug report? If not, what then? If yes, how? Not sure... guess I should ask here first.. thanks for answering in advance.

  Read the article

• Ubuntu appears very small at 1080p, text almost undreadable.

  - by Dakota

  Alright... So I have a 15" dell studio xps with a 1080p screen. Everything seems really small with 1080p, in 720 everything is fine but just looks very low res. So I definitely want to get the full resolution the display can give me but dont want everything so small. help?? EDIT: Well yes higher resolution means more pixels. But it shouldnt mean fonts the size of of 7 in MS word, and webpages looking like their at 50%... http://i.imgur.com/Ds76nk8.jpg http://i.imgur.com/9fW8vEt.jpg Im not saying windows is better, but windows did not appear miniature at 1080.

  Read the article

• Ubuntu 12.10 - Resolution stuck at 1024x768 using Open Source Radeon Driver

  - by mumble

  I'm using Ubuntu 12.10 with an ATI Radeon HD5670 card. I currently have the open source xorg-edgers driver. I've been using this driver interchangeably with the Radeon open source driver since fglrx seems to give me a lot of freezes. So I can't really use proprietary drivers, the Radeon driver seems to be stable for me, the resolution is the only problem. The resolution is stuck at 1024x768, where my monitor's native resolution is 1366x768. How do I enable that resolution? Going to System Settings Display only gives me 800x600 and 1024x768 by the way. And just another question, how do I know if xorg-edgers driver is enabled? When I run sudo lshw -c video, I still see the radeon driver. configuration: driver=radeon latency=0 Thanks a lot in advance!

  Read the article

• Second monitor not coming back on after going into hibernate

  - by dabraude

  10 and a new problem has come up. When I my machine hibernates the second monitor does not come back on. I did not have this problem in 11.04. The main monitor is plugged into a vga port, and the second plugged into a display port then an adapter to vga the system is a Dell Optiplex 790 and the graphics card is (according to lspci) a VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I am running the classic Gnome desktop though the problem occurs in Unity as well.

  Read the article

• How do you change your screen's color temperature in Ubuntu?

  - by RPG Master

  I edit my photos on my laptop (yes, I know they have crap displays) and I recently had to replace the screen because the old one just randomly died. The old one had decent color reproduction by default, but this new one is VERY blue. After playing with the Gamma I've gotten it to be a bit better, but it's still pretty blue. So, my question is, how do I go about changing my laptop's display's color temperature? And I don't mean through something like the Red, Green, Blue sliders in the NVIDIA config menu. I'm talking about like adjusting in degrees, like editing a photo's white balance. EDIT: So now I've found Redshift and it's doing me pretty good. I thought it might be helpful if I out here the command I'm using. redshift -t 5000:5000 -g .5 By adding this to my start up commands I should be good. I'm still open to other suggestions, because I'd like something that actually edited my xorg.conf or something like that.

  Read the article

• Force Xorg to run in specific resolution

  - by Z9iT

  From my past experience (using Win-Xp), this particular monitor works only on 60Hz , Best resolution being 1024*768. I have "installed n configured" Ubuntu 12.04 Minimal (on USB stick) so that most of the time terminal is used, however whenever theirs a need to enter GUI I may issue startx command to go into gnome. However the problem is that on this particular system, issuing this command poses problem for its default refresh rate don't synchronize with the monitor. The display keep on flickering and utterly unreadable. It is visible that gnome has been loaded and default wallpaper and desktop items are visible. But the problem is due to refresh rate different than 60Hz. I am looking for a command attribute to startx command which will force the refresh rate to 60Hz and resolution preferably to 1204*768

  Read the article

• Name resolution for the name <name> timed out after none of the configured DNS servers responded.

  - by Paul Brown

  Installed Windows 7 (previously ran XP and Vista with no problems) a couple of weeks ago and I'm at least once a day getting the above error show up in the event logs and losing all internet connection. The only current way to resolve it is to reboot my cable modem. My ISP have been running diagnostics on it and tell me there is no problem whatsoever. I've configured my router (and PC on occasion) to point at OpenDNS - still occurs. I've had the PC directly connected to the modem - still occurs. If I can give more info that might of use please ask thanks Update: After moaning at my ISP for a couple of weeks (VirginMedia) they agreed to send me out a new cable modem ... and I've not had the issue since.

  Read the article

• Why not all users can log in to a network computer by using <network computer name>/<user name> form

  - by Haris

  There is a file server in my office that is not connected to my office LAN. In this server there are folders that are shared. This server is connected to a switch and a wireless router. Everyone who wants to access this server uses wireless network connection. They log in to this server by providing user name and password registered to the server. Some people can log in to my office file server by providing user name in (the server name)/(user name) format, while other must use (the server IP address)/(user name) format. Why is it like this? I need everyone can access the file server by providing user name in (the server name)/(user name) format. I have tried to change the %SystemRoot%\system32\drivers\etc\hosts file, as some suggested, but it won't work. Any other suggestion?

  Read the article

• What to do with ca.crt, name.crt, name.key, name.ovpn files?

  - by tipu

  I was given these four files to access the office's vpn server. I am on ubuntu 12.04, and am unsure how to began using these. I tried using the vpn connection tab under the network connections, but my files didn't specify a username after importing and it forced to me to save one, so attempting to connect to it didn't yield any results. What am I supposed to do with these four files to connect to the vpn?

  Read the article

• Magical moving desktop icons

  - by Nathan Taylor

  I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

  Read the article

• poorman's redandunt domain name server array

  - by John

  Can I configure my domain, example.com's name servers as: ns1.dyndns.com ns2.dyndns.com ns1.opendns.com ns2.opendns.com That is, combining free dns services to create a redundant name server array? Note these name servers from different companies are not aware other companies' name servers also serve our domain. In case one company, say, ns1(2).dyndns.com is down, will people experience interruption when visiting my example.com? If one name server is unreachable, the next name server will be tried, or?

  Read the article

• SQL SERVER – Create Primary Key with Specific Name when Creating Table

  - by pinaldave

  It is interesting how sometimes the documentation of simple concepts is not available online. I had received email from one of the reader where he has asked how to create Primary key with a specific name when creating the table itself. He said, he knows the method where he can create the table and then apply the primary key with specific name. The attached code was as follows: CREATE TABLE [dbo].[TestTable]( [ID] [int] IDENTITY(1,1) NOT NULL, [FirstName] [varchar](100) NULL) GO ALTER TABLE [dbo].[TestTable] ADD  CONSTRAINT [PK_TestTable] PRIMARY KEY CLUSTERED ([ID] ASC) GO He wanted to know if we can create Primary Key as part of the table name as well, and also give it a name at the same time. Though it would look very normal to all experienced developers, it can be still confusing to many. Here is the quick code that functions as the above code in one single statement. CREATE TABLE [dbo].[TestTable]( [ID] [int] IDENTITY(1,1) NOT NULL, [FirstName] [varchar](100) NULL CONSTRAINT [PK_TestTable] PRIMARY KEY CLUSTERED ([ID] ASC) ) GO Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Constraint and Keys, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to fix E: Internal Error, No file name for libc6

  - by Loren Ramly

  How to fix E: Internal Error, No file name for libc6, Like that will show If I do: $ sudo apt-get upgrade or $ sudo apt-get install package This is example : $ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn hplip hplip-data libdrm-dev libdrm-intel1 libdrm-nouveau1a libdrm-radeon1 libdrm2 libgrip0 libhpmud0 libkms1 libsane-hpaio libunity-2d-private0 libunity-core-5.0-5 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae printer-driver-hpcups printer-driver-hpijs unity unity-2d-common unity-2d-panel unity-2d-shell unity-2d-spread unity-common unity-services The following packages will be upgraded: alsa-base firefox firefox-globalmenu firefox-gnome-support firefox-locale-en icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-7-jre-jamvm libdbus-glib-1-2 libdbus-glib-1-dev libgnutls-dev libgnutls-openssl27 libgnutls26 libgnutlsxx27 libssl-dev libssl-doc libssl1.0.0 linux-sound-base openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openjdk-7-jdk openjdk-7-jre openjdk-7-jre-headless openjdk-7-jre-lib openssl sudo 27 upgraded, 0 newly installed, 0 to remove and 26 not upgraded. 3 not fully installed or removed. Need to get 0 B/126 MB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? y E: Internal Error, No file name for libc6 I have follow instruction from here E: Internal Error, No file name for libssl1.0.0 . Which do: sudo apt-get update sudo apt-get clean sudo apt-get install -fy sudo dpkg -i /var/cache/apt/archives/*.deb sudo dpkg --configure -a sudo apt-get install -fy sudo apt-get dist-upgrade But stuck with same error E: Internal Error, No file name for libc6 when do command sudo apt-get install -fy. And I've been looking on google, but have not been successful until now. Thanks.

  Read the article

• Setting up VPS: How to configure name servers

  - by MeltingDog

  So I got a VPS set up (LAMP) and have transfered a couple of sites over. Now I want to point my domain names from the old host to the new VPS host, which does not have any name servers yet. On my registrars console I have set the domain name 'www.mydomain.com' domain host settings to point to my VPS's ip address, eg: ns1.mydomain.com = 111.222.3.4 and ns2.mydomain.com = 111.222.3.4 I then lowered the TTL to one hour. I then switched the Nameservers on that domain to these new ones. (ns1/2.mydomain.com) In WHM I then set the servers name servers to ns1.mydomain.com and ns2.mydomain.com. I waited an hour to test...but nothing changed - the domain name still directed to the old host. Have I missed something? Is the some other record I need to change on the DNS? I find this very confusing, does anyone know a resource or can provide a step by step guide on how to configure a new servers nameservers? Thanks EDIT: added image (sorry bout the censoring. Client insists) On my regisrars console: And on my VPS' WHM:

  Read the article

• Issue updating domain name servers from BlueHost to AWS

  - by cowls

  I am trying to migrate my site hosting from bluehost to AWS cloud based service. I have the site up and running on AWS with an elastic IP configured, it loads fine when I specify the IP address in the browser. I have gone into Route 53 on the AWS console and created a "hosted zone" for the domain. I then created a new record set of type "A" using the IP address as the value. I have a domain name registered with bluehost. Ive logged into the bluehost account and updated the domain name servers to point to those specified in Route 53 in the AWS console. When I hit the IP address directly the site loads, however it doesn't load when using the domain name (I get a google chrome oops error page saying page is not found) I've tried using this site: http://dns.squish.net/ to debug but it seems to be giving me the correct results. fizaclegems.com 300 IN A 107.20.209.78 Where 107.20.209.78 matches the elastic IP configured in the AWS console. This is the result it gives for all 4 name servers. Am I missing a step here? Does anyone know what else I should be doing or looking for?

  Read the article

• Problem in domain name of site in google search [on hold]

  - by Jayadratha Mondal

  My domain provider dont supports advanced DNS at this moment. So I have used iframe to forward to my webserver. Suppose my domain abc.com have a simple html which is opening xyz.com via Iframe. Google was showing abc.com on the search. But from last two days it is showing xyz.com, other things like description, name of the site are ok only the domain changed to xyz.com, but I want to show abc.com. When I'm typing the full domain then google showing the domain as I want. But If I type a part or any keyword then it showing that xyz.com. Anyone have any idea how to show abc.com again? EDIT: I dont know the domain name provider because its not mine. When I'm trying to set new A record its showing that "you need advanced dns to do this currently you are using simple DNS". I'm doing this from cpanel. Normally as per I know there are 3 sections. 1 domain name 2 A record 3Cname. But I dont have any domain name section.

  Read the article

• Android: Easiest way to make a WebView display a Bitmap?

  - by legr3c

  I have some images that I loaded from a remote source stored in Bitmap variables and I want to display them. In addition to switching between these images the user should also be able to zoom and pan them. My first idea was to somehow pass them via an intent to the built-in gallery application but this doesn't seem to be possible. A solution that is suggested in several places is using a WebView since it already supports zooming and panning. My question is how does my Bitmap data get into the WebView? Do I have to write it to a file first, which I would have to remove again later, or is there an easier way? Or are there even better ways to accomplish my main goal, which is displaying Bitmap data as zoomable and panable images?

  Read the article

• The best way to display data in a table view?

  - by LawVS

  Hey guys, I'm trying to display nutritional information in a table view but am struggling about the best way to show the info. I don't want to create unique views for each page as that would take up a lot of space. My ideal avenue would be like a website having links to data pages instead of individual views for each page. How would I best implement that? For example, I would want the first page to be a list of restaurants, then as you press the restaurant it would list the different types of food...the next page would be a list of those foods and then the final page would be the nutrition info itself. Thanks

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >