Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 24/1947 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Internet keeps connecting and disconnecting

    - by OmerPT
    I have a PC running 32bit Windows 7 Professional. My wireless internet card is Edimax EW-7128G, it is inside my computer case and it is connected to an antenna. My problem is: I have a wireless connection to my router, the signal is fine and it's not slow or anything, but it just keeps disconnecting every 30 seconds or so, then connects back, then it disconnects, then connects back and so on. This is new - it only started about a week ago, everything worked just fine until then. I know it's not a problem with the router because: Other computers can connect to it easily and they work just fine, no disconnections (My phone too). I know it's not a problem with the computer or the wireless card itself because: I have Ubuntu installed side-by-side with my Windows, and when I switch to Ubuntu the internet works great. This caused me to think it's probably a problem with the wireless card drivers installed on windows (Ubuntu auto-installed them, I installed them manually on windows): I tried uninstalling them, and then installing them back again, sadly that didn't help. I'm kind of lost here - can anyone think of anything else I should try? Thanks :)

    Read the article

  • Ubuntu 12.04 share the internet over WiFi from wvdial?

    - by Sour Lemon
    I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

    Read the article

  • What does path finding in internet routing do and how is it different from A*?

    - by alan2here
    Note: If you don't understand this question then feel free to ask clarification in the comments instead of voting down, it might be that this question needs some more work at the moment. I've been directed here from the Stack Excange chat room Root Access because my question didn't fit on Super User. In many aspects path finding algorithms like A star are very similar to internet routing. For example: A node in an A* path finding system can search for a path though edges between other nodes. A router that's part of the internet can search for a route though cables between other routers. In the case of A*, open and closed lists are kept by the system as a whole, sepratly from any individual node as well as each node being able to temporarily store a state involving several numbers. Routers on the internet seem to have remarkable properties, as I understand it: They are very performant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, there's never any doubling back for example. Similar IP addresses don't have to be geographically nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router doesn't have to store a list of all the addresses each of it's directions leads most directly to. I'm looking for a basic, general, high level description of the algorithms workings from the point of view of an individual router. Does anyone have one? I presume public internet routers don't use A* as the overheads would be to large, and scale to poorly. I also presume there is a single method worldwide because it seems as if must involve a lot of transferring data to update and communicate a reasonable amount of state between neighboring routers. For example, perhaps the amount of data that needs to be stored in each router scales logarithmically with the number of routers that exist worldwide, the detail and reliability of the routing is reduced over increasing distances, there is increasing backtracking involved in parts of the network that are less geographically uniform or maybe each router really does perform an A* style search, temporarily maintaining open and closed lists when a packet arrives.

    Read the article

  • ISA Server 2006 SP1 :: Allow unauthenticated users (non domain users) access to external (internet)

    - by Klaptrap
    Now that we have applied an internal to external rule blocking all users access to the internet, other than those users in a whitelist, we have the obvious issue of non authenticated users, not on our domain, i.e.; domain-less guests not being able to access the internet. Other than configuring each machine to use our alternative gateway - which would require a member of IT to be onsite everytime a guest arrives - can this be done through ISA adn AD?

    Read the article

  • ISA Server 2006 SP1 :: Allow unauthenticated users (non domain users) access to external (internet)

    - by Klaptrap
    Now that we have applied an internal to external rule blocking all users access to the internet, other than those users in a whitelist, we have the obvious issue of non authenticated users, not on our domain, i.e.; domain-less guests not being able to access the internet. Other than configuring each machine to use our alternative gateway - which would require a member of IT to be onsite everytime a guest arrives - can this be done through ISA adn AD?

    Read the article

  • How Do I Restrict Repository Access via WebSVN?

    - by kaybenleroll
    I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

    Read the article

  • How Do I Restrict Repository Access via WebSVN?

    - by kaybenleroll
    I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

    Read the article

  • lightweight access point?

    - by Joelio
    Im moving from an all in one to a router + access point. In doing googling and reasearch and talking to friends I ended up with router - cisco rv016 wifi access point - airnet 1142 lightweight access point. (lap1142n) In trying to set all this up and reading I think I bought the wrong access point. It seems I need a wireless controller? Can someone confirm that I should not have bought the lightweight one?

    Read the article

  • Internet Explorer-like clicking sound without using Explorer

    - by Tom
    When I switch on my Windows 7 laptop a few minutes after turning it on I hear a single click sound like the one Internet Explorer gives during browsing. I don't use Explorer at all. I use Firefox. What can it be then? Is it coming from Explorer running in the background? Or is it not related to Explorer at all? Has anyone else experienced something like this?

    Read the article

  • Calculating and billing IP multicast usage on the Internet

    - by obvio171
    I've been searching for the reasons why IP multicast isn't widely supported on the Public Internet, and a commonly-cited reason is the difficulty ISPs have in tracking Multicast usage for later billing. Given this difficulty, since ISPs control the routers and they're not forced to support Multicast (as per IPv4), they just disable it. I couldn't find what this difficulty was though. Since an ISP has full control of any inbound and outbound traffic, be it Unicast or Multicast, what's the difficulty in tracking and billing the latter that does not exist in the former?

    Read the article

  • Intermittent loss of internet connectivity with good wireless signal

    - by rsheart
    I recently bought a HP touch smart running windows 7. At random times, internet connectivity is lost while the wireless signal remains strong. The only way to restore connectivity is to restart the PC. Nothing else works. Have many other PC's on the same router also running windows 7 and no problems there. Have changed routers and problem remains. I have reinstalled the network drivers with no help. Any thoughts?

    Read the article

  • Internet Sharing via router

    - by mak4pi
    Question: How to setup Internet Sharing among two computers (one Mac 10.5.6, one Ubuntu 9.10) via a router? Situation: The Mac is using AirPort (wireless interface) to connect to router as 192.168.1.101. The Ubuntu is using an ethernet cable to connect to router as 192.168.1.104. Visual: Mac )))))) Router ======= Ubuntu Any ideas are greatly appreciated. Thanks.

    Read the article

  • Internet Connection losing

    - by Mehdi Golchin
    When my internet connection is idle for a while about 5 mins, the connection will be lost. It merely happens when the connection is idle, not during download. I'm using an ADSL service by a HUAWEI smartAX MT882a ADSL modem. Any help will be appreciated

    Read the article

  • Troubleshooting an unstable internet connection

    - by Konrad Rudolph
    My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

    Read the article

  • How to use PC's Internet Connection in Windows Mobile

    - by Vishnu
    Hi, I use Palm Treo 750 running Windows mobile 6.1. I don't have GPRS on my mobile. But, I have Broadband connection in my laptop running Windows Vista. How can I use the PC's internet connection to browse from mobile (either USB or bluetooth)? I have done this in one of my previous Windows mobiles (Smart Phone 2003 SE). Thanks in advance guys. Regards, Vishnu Prasath

    Read the article

  • Socks proxy on mac's shared internet

    - by AliBZ
    Hi all I use my mac's internet sharing to create wireless network for my ipod touch. I have a linux server and I use socks proxy. I wanna use this proxy on my ipod but i don't know how. I put my shared network connection behind the proxy with localhost ip but my ipod isn't behind the proxy. any ideas?

    Read the article

  • Internet Explorer StartUp Page

    - by quandary
    Question: In windows, is there a systemwide setting to change the internet explorer homepage ? So that when a new user is created, the homepage will be the one I set. Of course the user can change his setting later individually.

    Read the article

  • Java works under Firefox but not under Internet Explorer

    - by Dominic Grenier
    Java works under Firefox but not under IE. Java applet activated in security settings, activated in add-ons, activated in advanced tab; that's the advice they usually give in forums... I've also deleted my temporary internet files, reinstalled IE8 and it is also set as the default java for IE through the control panel. IE version: 8.0.6001.18702 Java version: 1.7.0_03. Windows XP SP3. Any advice? Thanks :)

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >