kevin white - Page 24 - Developer IT

Please help me, I need some solid career advice, put myself in a dumb situation

- by Kevin

Hi, First off, I just want to say thank you in advance for looking at my question and would really value your input on this subject. My core question is how do I proceed from the following predicament. I will be honest with you, I wasted my College Experience. I slacked off and didn't take any of my comp sci classes that seriously, somehow i still got out with a 3.25 GPA. But truth be told I learned nothing. I befriended most of my professors who went pretty lenient on me in terms of grading. However, I basically came out of College knowing how to program a simple calculator in VB.Net. I was (to my great surprise) hired by a very large respected company in Denver as a Junior developer. Well the long and the short of it is that I knew so little about programming that I quickly became the office pariah and was almost fired due to my incompetence. It has been 8 months now and I feel I have learned some basic things and I am not as picked on as I used to be by the other developers. However, everyone hates me and the first few months have given the other developers a horrible perception of me. I am no longer afraid of code or learning, but I have put my self in the precarious position of being the scapegoat of our department. I hate going to work every day because no one there is my friend and pretty much everyone is hostile to me. What should I do? Any advice?

Read the article

Other games that employ mechanics like the game "Diplomacy"

- by Kevin Peno

I'm doing a little bit of research and I'm hoping you can help me track down any games, other than Diplomacy (online version here), that employ all or some of the mechanics in Diplomacy (rules, short form). Examples I'm looking for: Simultaneous orders given prior to execution of orders In Diplomacy, players "write down" their moves and execute them "at the same time" Support, in terms of supporting an attacker or defender "take" a territory. In Diplomacy, no one unit is stronger than another you need to combine the strength of multiple units to attack other territories. Rules for how move conflicts are resolved Example, 2 units move into a space, but only one is allowed, what happens. I may add to this list later, but these are the primary things I'm looking for. If you need clarification on anything just let me know. Note: I tried asking this on GamingSE, but it was shot down. So, I am unsure where else I could post this. Since I am researching this for game development purposes, I assume this post is on topic. Please let me know if this is not the case. Please also feel free to re-categorize this. Thanks!

Read the article

How much Ruby should I learn before moving to Rails?

- by Kevin

Just a quick question.. I can never get a definitive answer when googling this, either. Some people say you can learn Rails without knowing any Ruby, but at some point you'll run into a brick wall and wish you knew Ruby and will have to go back to learn it..and some say to learn the "basics" of Ruby before learning Rails and it will make your life that much easier.. My current knowledge is low. I'm not a beginner, but I'm not pro, either. I went through the Learn Python The Hard Way online book in about a month, but I stopped once I got to the OOP side of Python (I know booleans, elif/if/else/statements, for loops, while loops, functions) I agree with learning the "basics" of Ruby before learning Rails, but what exactly are the "basics" of Ruby? Would I need to learn the whole OOP side of Ruby before I went on to Rails? Or would I just need to learn the Ruby syntax up to where I learned Python (booleans, elif/if/else/statements, for loops, while loops, functions) before I went on to Rails? Thanks!

Read the article

Would using a self-signed SSL certificate be appropriate in this scenario?

- by Kevin Y

Now I realize this topic has been discussed in a few questions before (specifically this one), but I'm still a little confused about the implications of using a self-signed certificate, and how I would be affected by doing so in this case. After reading various sources, I'm still a little confused about the exact details of using one. The biggest problem with a self-signed certificate, is a man-in-the-middle attack. Even if you are 100% sure that you are on the correct website and you completely trust the site (your email server for example), you could have someone intercept the connection and present you with their own self-signed certificate. You would think that you are using a secure connection with your email server but you are really using a secure connection to an attacker's email server. – SSL Shopper So somebody could switch out my self-signed certificate with their own, and I wouldn't be able to detect it? The way this site phrases it, it makes it sound worse to install a self-signed certificate than to leave your site without a certificate at all. Self-signed certificates cannot (by nature) be revoked, which may allow an attacker who has already gained access to monitor and inject data into a connection to spoof an identity if a private key has been compromised. CAs on the other hand have the ability to revoke a compromised certificate if alerted, which prevents its further use. - Wikipedia Does this mean that the only way someone could switch out their own certificate for mine is for them to find out the private key? I suppose this is more secure, but I'm still slightly confused about what exactly results from using a self-signed certificate. Is the only issue that obnoxious security warning that pops up in your browser when directed to the site, or is there more to it? Now in my case, I want to add the an SSL certificate to a minuscule Wordpress blog I run that I don't expect anyone else will read anytime soon; I mainly started it to get into the habit of blogging, and to learn more about the process of administrating a site (ex. what to do in situations like this one). Whenever I go to the login page and there's an HTTP:// instead of HTTPS://, I cringe a little. Submitting my password feels like I'm shouting my password out loud with hundreds of people listening. I don't plan on adding any other authors to the site, so I am the only person who would ever need to login. This isn't a site I'm trying to get page views from, or one that handles e-commerce or any sensitive info like that, simply my username and password to login with. One of the concerns (that I've gathered so far) of a self-signed certificate is that non-technical users might be scared by the security warning, but this would not be an issue in my case. TL;DR: If scaring visitors away isn't a concern (which it isn't in my case), is it acceptable to use a self-signed certificate for the purpose of encrypting my Wordpress blog's password, or are there added security issues I should be aware of? Essentially, I'm wondering whether adding a self-signed certificate will be safer than leaving my login page the way it is now, or if it adds the potential for more security breaches than leaving it sans-SSL.

Read the article

My experience working with Teradata SQL Assistant

- by Kevin Shyr

Originally posted on: http://geekswithblogs.net/LifeLongTechie/archive/2014/05/28/my-experience-working-with-teradata-sql-assistant.aspx To this date, I still haven't figure out how to "toggle" between my query windows. It seems like unless I click on that "new" button on top, whatever SQL I generate from right-click just overrides the current SQL in the window. I'm probably missing a "generate new sql in new window" setting The default Teradata SQL Assistant doesn't execute just the SQL query I highlighted. There is a setting I have to change first. I'm not really happy that the SQL assistant and SQL admin are different app. Still trying to get used to the fact that I can't quickly look up a table's keys/relationships while writing query. I have to switch between windows. LOVE the execution plan / explanation. I think that part is better done than MS SQL in some ways. The error messages can be better. I feel that Teradata .NET provider sends smaller query command over than others. I don't have any hard data to support my claim. One of my query in SSRS was passing multi-valued parameters to another query, and got error "Teradata 3577 row size or sort key size overflow". The search on this error says the solution is to cast result column into smaller data type, but I found that the problem was that the parameter passed into the where clause could not be too large. I wish Teradata SQL Assistant would remember the window size I just adjusted to. Every time I execute the query, the result set, query, and exec log auto re-adjust back to the default size. In SSMS, if I adjust the result set area to be smaller, it would stay like that if I execute query in the same window.

Read the article

Ubuntu 12.04 doesn't start after installing with LiveUSB

- by Kevin Arutyunyan

I need help! I installed Ubuntu with my LiveUSB, and it said restart to use your system, so I restarted. Now I am just stuck in a completely black screen with a blinking _ I'm already waiting 10 minutes for something to happen, but there's nothing. I don't know what the problem could be, but maybe the message I got during installation that said 'APT couldn't be configured, so no additional apps will be installed' was the problem? I'm still waiting.. Fast answers please :) thanks.

Read the article

SSAS deployment error: Internal error: Invalid enumeration value. Please call customer support! is not a valid value for this element.

- by Kevin Shyr

The first search on this error yielded some blog posts that says to check SQL server version. It suggested that I couldn't deploy a SSAS project originally set for SSAS 2008 to a SSAS 2008 R2, which didn't make sense to me. Combined with the fact that the error message was telling me to call customer support. Why do I need to call customer support unless something catastrophic happened?Turns out that one of the file on the SQL server is corrupt. I could simply delete the database on the SSAS server and re-run deployment. Problem solved.SSAS errors in visual studio: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Error 10 Internal error: Invalid enumeration value. Please call customer support! is not a valid value for this element. 0 0 Error 11 An error occurred while parsing the 'StorageMode' element at line 1, column 10523 ('http://schemas.microsoft.com/analysisservices/2003/engine' namespace) under Load/ObjectDefinition/Dimension/StorageMode. 0 0 Error 12 Errors in the metadata manager. An error occurred when instantiating a metadata object from the file, '\\?\E:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data\DWH Sales Facts.0.db\Competitor.48.dim.xml'. 0 0

Read the article

Deploying SSIS to Integration Services Catalog (SSISDB) via SQL Server Data Tools

- by Kevin Shyr

There are quite a few good articles/blogs on this. For a straight forward deployment, read this (http://www.bibits.co/post/2012/08/23/SSIS-SQL-Server-2012-Project-Deployment.aspx). For a more dynamic and comprehensive understanding about all the different settings, read part 1 (http://www.mssqltips.com/sqlservertip/2450/ssis-package-deployment-model-in-sql-server-2012-part-1-of-2/) and part 2 (http://www.mssqltips.com/sqlservertip/2451/ssis-package-deployment-model-in-sql-server-2012-part-2-of-2/) Microsoft official doc: http://technet.microsoft.com/en-us/library/hh213373 This only thing I would add is the following. After your first deployment, you'll notice that the subsequent deployment skips the second step (go directly "Select Destination" and skipped "Select Source"). That's because after your initial deployment, a ispac file is created to track deployment. If you decide to go back to "Select Source" and select SSIS catalog again, the deployment process will complete, but the packages will not be deployed.

Read the article

ParticleSystem in Slick2d (with MarteEngine)

- by Bro Kevin D.

First of all, sorry if this sounds very newbie-ish. I'm stuck at making a ParticleSystem I made using Pedigree to work in my game. It's basically an explosion that I want to display whenever an enemy dies. The ParticleSystem has two emitters, smoke and explosion I tried putting it in my Enemy (extends Entity) class Enemy extends Entity class @Override public void update(GameContainer gc, int delta) throws SlickException { super.update(gc, delta); /** bunch of codes */ explosionSystem.update(delta); } @Override public void render(GameContainer gc, Graphics gfx) throws SlickException { super.render(gc, gfx); if(isDestroyed) { explosionSystem.render(x,y); if(explosionSystem.getEmitter(1).completed()) { this.destroy(); } } } And it does not render. I'm not sure if this is the proper way of implementing it, as I've considered creating an Entity to serve as controller for all the Enemies. Right now, I'm just adding enemies every second. So how do I render the ParticleSystem when the enemy dies? If anyone can point me to the right direction. Thank you for your time.

Read the article

Getting PHP to work with apache to run .php files through browser [closed]

- by Kevin Duke

I have VPS running Debian 5.0 (I think) and I would like to get it to run PHP files. I was told it needed to be configured with Apache. I tried entering the command apt-get install apache2 php5 libapache2-mod-php5. But there was no change. Console output: http://pastebin.com/sVMWq6mA This is everything in my /etc/apache2/mods-enabled: http://img35.imageshack.us/img35/6474/modsb.jpg My webserver can be accessed here: http://206.217.223.136/test/ In my test.php file I have the code : <?php phpinfo(); ?> but instead of displaying the page, it tries to download it. How can I fix this?

Read the article

OpenGL - have object follow mouse

- by kevin james

I want to have an object follow around my mouse on the screen in OpenGL. (I am also using GLEW, GLFW, and GLM). The best idea I've come up with is: Get the coordinates within the window with glfwGetCursorPos. The window was created with window = glfwCreateWindow( 1024, 768, "Test", NULL, NULL); and the code to get coordinates is double xpos, ypos; glfwGetCursorPos(window, &xpos, &ypos); Next, I use GLM unproject, to get the coordinates in "object space" glm::vec4 viewport = glm::vec4(0.0f, 0.0f, 1024.0f, 768.0f); glm::vec3 pos = glm::vec3(xpos, ypos, 0.0f); glm::vec3 un = glm::unProject(pos, View*Model, Projection, viewport); There are two potential problems I can already see. The viewport is fine, as the initial x,y, coordinates of the lower left are indeed 0,0, and it's indeed a 1024*768 window. However, the position vector I create doesn't seem right. The Z coordinate should probably not be zero. However, glfwGetCursorPos returns 2D coordinates, and I don't know how to go from there to the 3D window coordinates, especially since I am not sure what the 3rd dimension of the window coordinates even means (since computer screens are 2D). Then, I am not sure if I am using unproject correctly. Assume the View, Model, Projection matrices are all OK. If I passed in the correct position vector in Window coordinates, does the unproject call give me the coordinates in Object coordinates? I think it does, but the documentation is not clear. Finally, to each vertex of the object I want to follow the mouse around, I just increment the x coordinate by un[0], the y coordinate by -un[1], and the z coordinate by un[2]. However, since my position vector that is being unprojected is likely wrong, this is not giving good results; the object does move as my mouse moves, but it is offset quite a bit (i.e. moving the mouse a lot doesn't move the object that much, and the z coordinate is very large). I actually found that the z coordinate un[2] is always the same value no matter where my mouse is, probably because the position vector I pass into unproject always has a value of 0.0 for z. Edit: The (incorrectly) unprojected x-values range from about -0.552 to 0.552, and the y-values from about -0.411 to 0.411.

Read the article

Playing Blu-ray using VLC

- by Kevin

I've been searching for a way to play Blu-ray using VLC on Ubuntu 12.04 64bit and all of them tell me that I've to somehow rip the disk into .mkv format then play it. But today, I found a page with directions on how to play Blu-rays directly on VLC. I've already finished downloading and pasting the files it told me to do, But it didn't work for me. Then I found a page where someone had tried it and it worked for them. Does anyone know how they got it to work? The page with the directions. The page where it worked. I also found this Does anyone know what it is talking about? I've already downloaded lxBDplayer, but I encountered a problem when installing the lcbdaacs plugins. Are there any other ways to install the lxbdaacs plugin?

Read the article

Multiple Audio listeners in Scene

- by Kevin Jensen Petersen

THIS IS UNITY Im trying to make a FPS game over networking, it works fine. But now, when im trying to implement sound, it won't work. My guess would be, to add a Audio listener to the prefab, that gets instansiated whenever a player connects to the server, however the problem about this is that each player's audiolistener have been switched out which the other player(s), so the AudioSource won't play at the player, but at someone else in the game. Any suggestions ?

Read the article

Ubuntu on a netbook. Wait for 12.10?

- by Kevin Duke

My friend has a really slow 2 yr old Toshiba netbook with 1GB of RAM. She is annoyed how slow Windows Starter runs on it so I suggested switching to Ubuntu. Since 12.10 is due in a few days, I'm not sure if we should wait before installing Ubuntu or if we should install it now in order to use Unity 2D. For a low-end device, should we use Unity 2D or use Unity 3D on 12.10 since Unity 2D is no longer present in 12.10? I understand Unity 3D has been greatly improved but is it faster than Unity 2D in the LTS version for a low-spec'd device?

Read the article

11.04 radeon screen tearing oddity

- by Kevin Qiu

I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

Read the article

WebCenter Content (WCC) Trace Sections

- by Kevin Smith

Kyle has a good post on how to modify the size and number of WebCenter Content (WCC) trace files. His post reminded me I have been meaning to write a post on WCC trace sections for a while. searchcache - Tells you if you query was found in the WCC search cache. searchquery - Shows the processing of the query as it is converted form what the user submitted to the end query that will be sent to the database. Shows conversion from the universal query syntax to the syntax specific to the search solution WCC is configured to use. services (verbose) - Lists the filters that are called for each service. This will let you know what filters are available for each service and will also tell you what filters are used by WCC add-on components and any custom components you have installed. The How To Component Sample has a list of filters, but it has not been updated since 7.5, so it is a little outdated now. With each new release WCC adds more filters. If you have a filter that has no code attached to it you will see output like this: services/6 09.25 06:40:26.270 IdcServer-423 Called filter event computeDocName with no filter plugins registered When a WCC add-on or custom component uses a filter you will see trace output like this: services/6 09.25 06:40:26.275 IdcServer-423 Calling filter event postValidateCheckinData on class collections.CollectionValidateCheckinData with parameter postValidateCheckinDataservices/6 09.25 06:40:26.275 IdcServer-423 Calling filter event postValidateCheckinData on class collections.CollectionFilters with parameter postValidateCheckinData As you can see from this sample output it is possible to have multiple code points using the same filter. systemdatabase - Dumps the database call AFTER it executes. This can be somewhat troublesome if you are trying to track down some weird database problems. We had a problem where WCC was getting into a deadlock situation. We turned on the systemdatabase trace section and thought we had the problem database call, but it turned out since it printed out the database call after it was executed we were looking at the database call BEFORE the one causing the deadlock. We ended up having to turn on tracing at the database level to see the database call WCC was making that was causing the deadlock. socketrequests (verbose) - dumps the actual messages received and sent over the socket connection by WCC for a service. If you have gzip enabled you will see junk on the response coming back from WCC. For debugging disable the gzip of the WCC response.Here is an example of the dump of the request for a GET_SEARCH_RESULTS service call. socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: REMOTE_USER=sysadmin.USER-AGENT=Java;.Stel socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: lent.CIS.11g.CONTENT_TYPE=text/html.HEADER socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: _ENCODING=UTF-8.REQUEST_METHOD=POST.CONTEN socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: T_LENGTH=270.HTTP_HOST=CIS.$$$$.NoHttpHead socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: ers=0.IsJava=1.IdcService=GET_SEARCH_RESUL socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: [email protected] socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: calData.SortField=dDocName.ClientEncoding= socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: UTF-8.IdcService=GET_SEARCH_RESULTS.UserTi socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: meZone=UTC.UserDateFormat=iso8601.SortDesc socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: =ASC.QueryText=dDocType..matches..`Documen socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: t`.@end. userstorage, jps - Provides trace details for user authentication and authorization. Includes information on the determination of what roles and accounts a user has access to. In 11g a new trace section, jps, was added with the addition of the JpsUserProvider to communicate with WebLogic Server. The WCC developers decide when to use the verbose option for their trace output, so sometime you need to try verbose to see what different information you get. One of the things I would always have liked to see if the ability to turn on verbose output selectively for individual trace sections. When you turn on verbose output you get it for all trace sections you have enabled. This can quickly fill up your trace files with a lot of information if you have the socket trace section turned on.

Read the article

Lightest weight ubuntu desktop for text editing in big terminal windows?

- by Kevin Pauli

I have an older windows laptop onto which I'm installing ubuntu within a VM. My goal is just to use terminal-based linux tools such as vim and shell scripting. I don't give a hoot about any gui for this box. So I first installed ubuntu minimalcd and chose "Basic Ubuntu Server". Upon boot, the text-based terminal came up and I logged in, but the problem is it only gives me 80 columns. I want to do terminal mode vim but have a couple hundred columns to take advantage of my large monitor. If you happen to know how to do that, please see my question here . This post is assuming that the other question is not answerable, and that I will need a desktop to get more than 80 columns in a terminal window. So if that is the case, I want the lightest weight one possible, because this is older hardware and all I want is the ability to have nice big text-based terminal windows for editing text. From the ubuntu minimal CD, I see options for Edubuntu, Kubuntu, etc. Which one of the available desktops would be a good choice for my needs?

Read the article

Screen tearing oddity when one window is on top of another with Radeon

- by Kevin Qiu

I have a mobility radeon 5850 running 11.04 and am running catalyst 11.10 drivers. I noticed that whenever I have two windows open, one of top of the other, scrolling results in minor screen tearing, usually around the border of the window on the bottom. When I minimize or close the bottom the tearing goes away. I have tear free desktop enabled and tried looking for this specific issue but couldn't find anyone else with it. It happens in both Unity and Classic. Is there any fix for this?

Read the article

Using SSIS to send a HTML E-Mail Message with built-in table of Counts.

- by Kevin Shyr

For the record, this can be just as easily done with a .NET class with a DLL call. The two major reasons for this ending up as a SSIS package are: There are a lot of SQL resources for maintenance, but not as many .NET developers. There is an existing automated process that links up SQL Jobs (more on that in the next post), and this is part of that process. To start, this is what the SSIS looks like: The first part of the control flow is just for the override scenario. In the Execute SQL Task, it calls a stored procedure, which already formats the result into XML by using "FOR XML PATH('Row'), ROOT(N'FieldingCounts')". The result XML string looks like this: <FieldingCounts> <Row> <CellId>M COD</CellId> <Mailed>64</Mailed> <ReMailed>210</ReMailed> <TotalMail>274</TotalMail> <EMailed>233</EMailed> <TotalSent>297</TotalSent> </Row> <Row> <CellId>M National</CellId> <Mailed>11</Mailed> <ReMailed>59</ReMailed> <TotalMail>70</TotalMail> <EMailed>90</EMailed> <TotalSent>101</TotalSent> </Row> <Row> <CellId>U COD</CellId> <Mailed>91</Mailed> <ReMailed>238</ReMailed> <TotalMail>329</TotalMail> <EMailed>291</EMailed> <TotalSent>382</TotalSent> </Row> <Row> <CellId>U National</CellId> <Mailed>63</Mailed> <ReMailed>286</ReMailed> <TotalMail>349</TotalMail> <EMailed>374</EMailed> <TotalSent>437</TotalSent> </Row> </FieldingCounts> This result is saved into an internal SSIS variable with the following settings on the General tab and the Result Set tab: Now comes the trickier part. We need to use the XML Task to format the XML string result into an HTML table, and I used Direct input XSLT And here is the code of XSLT: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="html" indent="yes"/> <xsl:template match="/ROOT"> <table border="1" cellpadding="6"> <tr> <td></td> <td>Mailed</td> <td>Re-mailed</td> <td>Total Mail (Mailed, Re-mailed)</td> <td>E-mailed</td> <td>Total Sent (Mailed, E-mailed)</td> </tr> <xsl:for-each select="FieldingCounts/Row"> <tr> <xsl:for-each select="./*"> <td> <xsl:value-of select="." /> </td> </xsl:for-each> </tr> </xsl:for-each> </table> </xsl:template> </xsl:stylesheet> Then a script task is used to send out an HTML email (as we are all painfully aware that SSIS Send Mail Task only sends plain text) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 using System; using System.Data; using Microsoft.SqlServer.Dts.Runtime; using System.Windows.Forms; using System.Net.Mail; using System.Net; namespace ST_b829a2615e714bcfb55db0ce97be3901.csproj { [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")] public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase { #region VSTA generated code enum ScriptResults { Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success, Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure }; #endregion public void Main() { String EmailMsgBody = String.Format("<HTML><BODY><P>{0}</P><P>{1}</P></BODY></HTML>" , Dts.Variables["Config_SMTP_MessageSourceText"].Value.ToString() , Dts.Variables["InternalStr_CountResultAfterXSLT"].Value.ToString()); MailMessage EmailCountMsg = new MailMessage(Dts.Variables["Config_SMTP_From"].Value.ToString().Replace(";", ",") , Dts.Variables["Config_SMTP_Success_To"].Value.ToString().Replace(";", ",") , Dts.Variables["Config_SMTP_SubjectLinePrefix"].Value.ToString() + " " + Dts.Variables["InternalStr_FieldingDate"].Value.ToString() , EmailMsgBody); //EmailCountMsg.From. EmailCountMsg.CC.Add(Dts.Variables["Config_SMTP_Success_CC"].Value.ToString().Replace(";", ",")); EmailCountMsg.IsBodyHtml = true; SmtpClient SMTPForCount = new SmtpClient(Dts.Variables["Config_SMTP_ServerAddress"].Value.ToString()); SMTPForCount.Credentials = CredentialCache.DefaultNetworkCredentials; SMTPForCount.Send(EmailCountMsg); Dts.TaskResult = (int)ScriptResults.Success; } } } Note on this code: notice the email list has Replace(";", ","). This is only here because the list is configurable in the SQL Job Step at Set Values, which does not react well with colons as email separator, but system.Net.Mail only handles comma as email separator, hence the extra replace in the string. The result is a nicely formatted email message with count information:

Read the article

Parsing google site speed in analytics

- by Kevin Burke

I'm having a hard time making heads or tails of the Site Speed graphs in Google Analytics. Our site speed is fluctuating wildly from month to month, despite a large sample (the report is "based on 100,000's of visits) and a consistent web set up (static files served from an EC2 instance running nginx behind a load balancer). Here's our site speed, with each datapoint representing a week worth of data. Over this time period we modified our source and HTTP headers to increase our cache hits on static resources by 5x. Why would it fluctuate so much? Is there any way to get more reliable information from those graphs?

Read the article

What package do I need to build a Qt 5 & CMake application?

- by Kevin Reid

I'm trying to build sdrangelove, which wants Qt 5 and uses CMake for its build system, on Ubuntu 13.10. What package do I need to install to give it the file it's asking for here? There are a lot of *qt5* packages, and I've tried installing the promising looking ones to no effect. All the discussions I've found either have things working fine or are talking about writing CMake build rules rather than executing them. I don't have a lot of experience with the organization of Debian/Ubuntu packaging. CMake Error at CMakeLists.txt:14 (find_package): By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has asked CMake to find a package configuration file provided by "Qt5Core", but CMake did not find one. Could not find a package configuration file provided by "Qt5Core" (requested version 5.0) with any of the following names: Qt5CoreConfig.cmake qt5core-config.cmake Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set "Qt5Core_DIR" to a directory containing one of the above files. If "Qt5Core" provides a separate development package or SDK, be sure it has been installed.

Read the article

Instead of alter table column to turn IDENTITY on and off, turn IDENTITY_INSERT on and off

- by Kevin Shyr

First of all, I don't know which version of SQL this post (http://www.techonthenet.com/sql/tables/alter_table.php) is based on, but at least for Microsoft SQL Server 2008, the syntax is not: ALTER TABLE [table_name] MODIFY [column_name] [data_type] NOT NULL; Instead, it should be: ALTER TABLE [table_name] ALTER COLUMN [column_name] [data_type] NOT NULL; Then, as several posts point out, you can't use T-SQL to run an existing column into an IDENTITY column. Instead, use the IDENTITY_INSERT to copy data from other tables. http://msdn.microsoft.com/en-us/library/ms188059.aspx SET IDENTITY_INSERT [table_name] ON INSERT .... SET IDENTITY_INSERT [table_name] OFF http://www.sqlservercentral.com/Forums/Topic126147-8-1.aspx http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=65257

Read the article

SSL setup with GoDaddy subdomains and EC2 servers

- by Kevin

We have two EC2 instances that are used to host various scripts. Our main page 'companyname.com' is hosted with GoDaddy but is unrelated to those EC2 instances. I need to setup SSL connections for the two EC2 microinstances, one running Linux AMI and the other running Windows Server. I purchased two single-domain Comodo certificates and am at the part to generate CSR's on the instances. I'm not sure what to put as "Server Name" on EC2. I would like each server to be accessible through a subdomain which I have forwarded on GoDaddy to the elastic IPs on EC2. For server name, do I use the elastic ip, the EC2 public dns, or the subdomain that I want? And which of these do I then place in my VirtualHosts file on Apache? The Windows instance is running IIS7 but the Apache box is priority.

Read the article

How to run RCU from the command line

- by Kevin Smith

When I was trying to figure out how to run RCU on 64-bit Linux I found this post. It shows how to run RCU from the command line. It didn't actually work for me, so you can see my post on how to run RCU on 64-bit Linux. But, seeing how to run RCU from the command got me started thinking about running RCU from the command line to create the schema for WebCenter Content. That post got me part of the way there since it shows how run RCU silently from the command line, but to do this you need to know the name of the RCU component for WebCenter Content. I poked around in the RCU files and found the component name for WCC is CONTENTSERVER11. There is a contentserver11 directory in rcuHome/rcu/integration and when you look at the contentserver11.xml file you will see <RepositoryConfig COMP_ID="CONTENTSERVER11"> With the component name for WCC in hand I was able to use this command line to run RCU and create the schema for WCC. .../rcuHome/bin/rcu -silent -createRepository -databaseType ORACLE -connectString localhost:1521:orcl1 -dbUser sys -dbRole sysdba -schemaPrefix TEST -component CONTENTSERVER11 -f <rcu_passwords.txt To make the silent part work and not have it prompt you for the passwords needed (sys password and password for each schema) you use the -f option and specify a file containing the passwords, one per line, in the order the components are listed on the -component argument. Here is the output from rcu when I ran the above command. Processing command line ....Repository Creation Utility - Checking PrerequisitesChecking Global PrerequisitesRepository Creation Utility - Checking PrerequisitesChecking Component PrerequisitesRepository Creation Utility - Creating TablespacesValidating and Creating TablespacesRepository Creation Utility - CreateRepository Create in progress.Percent Complete: 0...Percent Complete: 100Repository Creation Utility: Create - Completion SummaryDatabase details:Host Name : localhostPort : 1521Service Name : ORCL1Connected As : sysPrefix for (prefixable) Schema Owners : TESTRCU Logfile : /u01/app/oracle/logdir.2012-09-26_07-53/rcu.logComponent schemas created:Component Status LogfileOracle Content Server 11g - Complete Success /u01/app/oracle/logdir.2012-09-26_07-53/contentserver11.logRepository Creation Utility - Create : Operation Completed This works fine if you want to use the default tablespace sizes and options, but there does not seem to be a way to specify the tablespace options on the command line. You can specify the name of the tablespace and temp tablespace, but they must already exist in the database before running RCU. I guess you can always create the tablespaces first using your desired sizes and options and then run RCU and specify the tablespaces you created. When looking up the command line options in the RCU doc I found it has the list of components for each product that it supports. See Appendix B in the RCU User's Guide.

Read the article

Solving Inbound Refinery PDF Conversion Issues, Part 1

- by Kevin Smith

Working with Inbound Refinery (IBR) and PDF Conversion can be very frustrating. When everything is working smoothly you kind of forgot it is even there. Documents are cheeked into WebCenter Content (WCC), sent to IBR for conversion, converted to PDF, returned to WCC, and viola your Office documents have a nice PDF rendition available for viewing. Then a user checks in a bunch of password protected Word files, the conversions fail, your IBR queue starts backing up, users start calling asking why their document have not been released yet, and your spend a frustrating afternoon trying to recover and get things back running properly again. Password protected documents are one cause of PDF conversion failures, and I will cover those in a future blog post, but there are many other problems that can cause conversions to fail, especially when working with the WinNativeConverter and using the native applications, e.g. Word, to convert a document to PDF. There are other conversion options like PDFExportConverter which uses Oracle OutsideIn to convert documents directly to PDF without the need for the native applications. However, to get the best fidelity to the original document the native applications must be used. Many customers have tried PDFExportConverter, but have stayed with the native applications for conversion since the conversion results from PDFExportConverter were not as good as when the native applications are used. One problem I ran into recently, that at least has a easy solution, are Word documents that display a Show Repairs dialog when the document is opened. If you open the problem document yourself you will see this dialog. This will cause the conversion to time out. Any time the native application displays a dialog that requires user input the conversion will time out. The solution is to set add a setting for BulletProofOnCorruption to the registry for the user running Word on the IBR server. See this support note from Microsoft for details. The support note says to set the registry key under HKEY_CURRENT_USER, but since we are running IBR as a service the correct location is under HKEY_USERS\.DEFAULT. Also since in our environment we were using Office 2007, the correct registry key to use was: HKEY_USERS\.DEFAULT\Software\Microsoft\Office\11.0\Word\Options Once you have done this restart the IBR managed server and resubmit your problem document. It should now be converted successfully. For more details on IBR see the Oracle® WebCenter Content Administrator's Guide for Conversion.

Search Results

Search found 5096 results on 204 pages for 'kevin white'.

Page 24/204 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31 | Next Page >

- by Kevin

- by Kevin Peno

- by Kevin

- by Kevin Y

- by Kevin Shyr

- by Kevin Arutyunyan

- by Kevin Shyr

- by Kevin Shyr

- by Bro Kevin D.

- by Kevin Duke

- by kevin james

- by Kevin

- by Kevin Jensen Petersen

- by Kevin Duke

- by Kevin Qiu

- by Kevin Smith

- by Kevin Pauli

- by Kevin Qiu

- by Kevin Shyr

- by Kevin Burke

- by Kevin Reid

- by Kevin Shyr

- by Kevin

- by Kevin Smith

- by Kevin Smith

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31 | Next Page >