Search Results

Search found 2108 results on 85 pages for 'kvm virtualization'.

Page 24/85 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• file corruption on read/write 2.6.32-22-server (happens across many kernels)

  - by Jonathan

  Hi Guys, I'm having an issue where after the server has been up for a period of time (~week/few days) the server will start reading corrupt data. For instance when I run a sha1sum of a file after a fresh boot it remains the same. However after a while I will start to get segfaults and from then on whenever I read this file I get a different sha1sum. I've checked S.M.A.R.T with long tests and I've run an extended memtest86+(12 passes) My lspci is as follows: 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller 02:00.0 Ethernet controller: Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0) 03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 I could really use some help on this, do you have any idea what could cause this? It's really frustrating me as it seems to trigger entirely randomly and will not go away until I reboot. I'm also use KVM for virtualization as well as MD for software RAID on this server and the processor is a Phenom II X4 965. I don't believe it's the software raid however as this affects files also hosted on non-raid partitions so I don't know.

  Read the article

• 2xAMD Opteron 6128 with libvirt, Physical CPU 13 doesn't exist

  - by yak

  I need help with libvirt(?) problem. Server specs: ProLiant DL165 G7 2x AMD Opteron(tm) Processor 6128 System: Debian GNU/Linux testing (wheezy) 3.2.0-3-amd64 libvirt 0.9.12-5 kvm 1:1.1.2+dfsg-2 $ grep processor /proc/cpuinfo | wc -l 16 $ virsh nodeinfo setlocale: No such file or directory CPU model: x86_64 CPU(s): 16 CPU frequency: 800 MHz CPU socket(s): 2 Core(s) per socket: 4 Thread(s) per core: 1 NUMA cell(s): 1 Memory size: 66114200 KiB $ virsh capabilities .. <topology> <cells num='4'> <cell id='0'> <cpus num='4'> <cpu id='0'/> <cpu id='1'/> <cpu id='2'/> <cpu id='3'/> </cpus> </cell> <cell id='1'> <cpus num='4'> <cpu id='4'/> <cpu id='5'/> <cpu id='6'/> <cpu id='7'/> </cpus> </cell> <cell id='2'> <cpus num='4'> <cpu id='12'/> <cpu id='13'/> <cpu id='14'/> <cpu id='15'/> </cpus> </cell> <cell id='3'> <cpus num='4'> <cpu id='8'/> <cpu id='9'/> <cpu id='10'/> <cpu id='11'/> </cpus> </cell> </cells> </topology> .. $ virsh vcpupin vm 0 13,12,11,10,9,8,7,6,5 error: Physical CPU 13 doesn't exist. error: cpulist: Invalid format. Question? Why my VM Guests use only first 8 CPUs and next 8 are idling? $ for host in virsh list | awk '{print $2}'; do virsh vcpuinfo $host; done | grep ^CPU: | sort | uniq CPU: 0 CPU: 1 CPU: 2 CPU: 3 CPU: 4 CPU: 5 CPU: 6 CPU: 7 Any ideas how to change it?

  Read the article

• WPF Data virtualizing ListView

  - by Robert Jeppesen

  In our current WinForms app, we are displaying millions of records in ListView, using virtualization. Rows are loaded from DB as they are requested. This works well, with good performance. This is a showstopper for migrating to WPF for us. We need data virtualization in a ListView, like WinForms 2.0 has. Do you know a decent third-party control, or a relatively easy way of doing it with built-in controls? It doesn't need to be a DataGrid, a simple ListView will suffice. Note, I'm note talking about UI virtualization, it's data virtualization.

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• How two or more guest OS's hosted in a virtual environment handles editing of single resource?

  - by pramodc84

  I know this sounds very general question. Consider 2 OS's running using virtualization say operating system level virtualization. How concurrency is handled if both hosted OS using same resource and how this works?

  Read the article

• Discount Codes Galore

  - by Cassandra Clark

  Saving money is at the top of everyones list right now. With this in mind the Oracle Technology Network team has compiled a list of discounts available at the Oracle Store. We are also introducing an Oracle Technology Network member discount from O'Reilly Media. If you subscribe to any of the Oracle Technology newsletters you also saw special discounts from CRC Press, Packt Publishing and Apress. We are going to do our best to bring you more offers like this every month. Now on to the discounts... Oracle Store offers - all below expiring May 31st 2010. Don't miss out! Expand Your Productivity with Oracle Open Office and Save 15%? Enter OTNOffice at checkout. Buy Now! Drive Business Agility and Performance with Industry-leading Oracle Database Management Packs.  Save 10% when you purchase them at the Oracle Store. Enter OTNDBMP at checkout. Buy Now! 15% Savings on Oracle Virtualization and Unbreakable Linux Support at the Oracle Store Enter code OTNLinuxVM at checkout. Buy Now! 20% Savings on Oracle SQL Developer Data Modeler Use OTNSQL at checkout. Buy Now! O'Reilly Oracle Technology Network Member Offer O'Reilly is generously offering Oracle Technology Network Members 35% off for print books and 40% off of eBooks. Browse Oracle titles at- http://oreilly.com/pub/topic/oracle. Use discount code TECNT at checkout.

  Read the article

• Mirror virtualized development environment

  - by David Casillas

  I work alone in some iOS projects in a local environment. I have been thinking in a way to be able to share my development environment between my Mac Mini and my MacBook. I mostly work at home in the Mini but sometimes I need to do a demo or work outside and I would like to have the development environment mirrored in both. I have think in using a virtual machine (via VirtualBox) with just my development tools instaled. Then I could synchronize that VM with some software between both computers so I will always have the exact environment no matter what computer I use. Is there any good reason not do do this way? I have not used Virtualization to much so I have no background on the subject. My basic setup will be: Mac Mini: i7 dual Core, 8Gb. OSX Mountain Lion Host OS: MacBook: 2.4 Core 2 Duo. 4Gb. OSX Lion Host OS. Virtual Box with Mountain Lion guest OS in both machines. XCode5, Simulator.

  Read the article

• Join us for Live Oracle VM and Oracle Linux Cloud Events in Europe

  - by Monica Kumar

  Join us for a series of live events and discover how Oracle VM and Oracle Linux offer an integrated and optimized infrastructure for quickly deploying a private cloud environment at lower cost. As one of the most widely deployed operating systems today, Oracle Linux delivers higher performance, better reliability, and stability, at a lower cost for your cloud environments. Oracle VM is an application-driven server virtualization solution fully integrated and certified with Oracle applications to deliver rapid application deployment and simplified management. With Oracle VM, you have peace of mind that the entire Oracle stack deployed is fully certified by Oracle. Register now for any of the upcoming events, and meet with Oracle experts to discuss how we can help in enabling your private cloud. Nov 20: Foundation for the Cloud: Oracle Linux and Oracle VM (Belgium) Nov 21: Oracle Linux & Oracle VM Enabling Private Cloud (Germany) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Nov 28: Realize Substantial Savings and Increased Efficiency with Oracle Linux and Oracle VM (Luxembourg) Nov 29: Foundation for the Cloud: Oracle Linux and Oracle VM (Netherlands)Dec 5: MySQL Tech Tour, including Oracle Linux and Oracle VM (France) Hope to see you at one of these events!

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• Linux not buffering block I/O when the device is not "in use" (i.e. mounted)

  - by Radek Hladík

  I am installing new server and I've found an interesting issue. The server is running Fedora 19 (3.11.7-200.fc19.x86_64 kernel) and is supposed to host a few KVM/Qemu virtual servers (mail server, file server, etc..). The HW is Intel(R) Xeon(R) CPU 5160 @ 3.00GHz with 16GB RAM. One of the most important features will be Samba server and we have decided to make it as virtual machine with almost direct access to the disks. So the real HDD is cached on SSD (via bcache) then raided with md and the final device is exported into the virtual machine via virtio. The virtual machine is again Fedora 19 with the same kernel. One important topic to find out is whether the virtualization layer will not introduce high overload into disk I/Os. So far I've been able to get up to 180MB/s in VM and up to 220MB/s on real HW (on the SSD disk). I am still not sure why the overhead is so big but it is more than the network can handle so I do not care so much. The interesting thing is that I've found that the disk reads are not buffered in the VM unless I create and mount FS on the disk or I use the disks somehow. Simply put: Lets do dd to read disk for the first time (the /dev/vdd is an old Raptor disk 70MB/s is its real speed): [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 36.8038 s, 71.2 MB/s Buffers: 14444 kB Rereading the data shows that they are cached somewhere but not in buffers of the VM. Also the speed increased to "only" 500MB/s. The VM has 4GB of RAM (more that the test file) [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.16016 s, 508 MB/s Buffers: 14444 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.05727 s, 518 MB/s Buffers: 14444 kB Now lets mount the FS on /dev/vdd and try the dd again: [root@localhost ~]# mount /dev/vdd /mnt/tmp [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 4.68578 s, 559 MB/s Buffers: 2574592 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 1.50504 s, 1.7 GB/s Buffers: 2574592 kB While the first read was the same, all 2.6GB got buffered and the next read was at 1.7GB/s. And when I unmount the device: [root@localhost ~]# umount /mnt/tmp [root@localhost ~]# cat /proc/meminfo | grep Buffers Buffers: 14452 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.10499 s, 514 MB/s Buffers: 14468 kB The bcache was disabled while testing and the results are same on faster (newer) HDDs and on SSD (except for the initial read speed of course). To sum it up. When I read from the device via dd first time, it gets read from the disk. Next time I reread it gets cached in the host but not in the guest (thats actually the same issue, more on that later). When I mount the filesystem but try to read the device directly it gets cached in VM (via buffers). As soon as I stop "using" it, buffers are discarded and the device is not cached anymore in the VM. When I looked into buffers value on the host I realized that the situation is the same. The block I/O gets buffered only when the disk is in use, in this case it means "exported to a VM". On host, after all the measurement done: 3165552 buffers On the host, after the VM shutdown: 119176 buffers I know it is not important as the disks will be mounted all the time but I am curious and I would like to know why it is working like this.

  Read the article

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

• VirtualBox 4.2.14 is now available

  - by user12611829

  The VirtualBox development team has just released version 4.2.14, and it is now available for download. This is a maintenance release for version 4.2 and contains quite a few fixes. Here is the list from the official Changelog. VMM: another TLB invalidation fix for non-present pages VMM: fixed a performance regression (4.2.8 regression; bug #11674) GUI: fixed a crash on shutdown GUI: prevent stuck keys under certain conditions on Windows hosts (bugs #2613, #6171) VRDP: fixed a rare crash on the guest screen resize VRDP: allow to change VRDP parameters (including enabling/disabling the server) if the VM is paused USB: fixed passing through devices on Mac OS X host to a VM with 2 or more virtual CPUs (bug #7462) USB: fixed hang during isochronous transfer with certain devices (4.1 regression; Windows hosts only; bug #11839) USB: properly handle orphaned URBs (bug #11207) BIOS: fixed function for returning the PCI interrupt routing table (fixes NetWare 6.x guests) BIOS: don't use the ENTER / LEAVE instructions in the BIOS as these don't work in the real mode as set up by certain guests (e.g. Plan 9 and QNX 4) DMI: allow to configure DmiChassisType (bug #11832) Storage: fixed lost writes if iSCSI is used with snapshots and asynchronous I/O (bug #11479) Storage: fixed accessing certain VHDX images created by Windows 8 (bug #11502) Storage: fixed hang when creating a snapshot using Parallels disk images (bug #9617) 3D: seamless + 3D fixes (bug #11723) 3D: version 4.2.12 was not able to read saved states of older versions under certain conditions (bug #11718) Main/Properties: don't create a guest property for non-running VMs if the property does not exist and is about to be removed (bug #11765) Main/Properties: don't forget to make new guest properties persistent after the VM was terminated (bug #11719) Main/Display: don't lose seamless regions during screen resize Main/OVF: don't crash during import if the client forgot to call Appliance::interpret() (bug #10845) Main/OVF: don't create invalid appliances by stripping the file name if the VM name is very long (bug #11814) Main/OVF: don't fail if the appliance contains multiple file references (bug #10689) Main/Metrics: fixed Solaris file descriptor leak Settings: limit depth of snapshot tree to 250 levels, as more will lead to decreased performance and may trigger crashes VBoxManage: fixed setting the parent UUID on diff images using sethdparentuuid Linux hosts: work around for not crashing as a result of automatic NUMA balancing which was introduced in Linux 3.8 (bug #11610) Windows installer: force the installation of the public certificate in background (i.e. completely prevent user interaction) if the --silent command line option is specified Windows Additions: fixed problems with partial install in the unattended case Windows Additions: fixed display glitch with the Start button in seamless mode for some themes Windows Additions: Seamless mode and auto-resize fixes Windows Additions: fixed trying to to retrieve new auto-logon credentials if current ones were not processed yet Windows Additions installer: added the /with_wddm switch to select the experimental WDDM driver by default Linux Additions: fixed setting own timed out and aborted texts in information label of the lightdm greeter Linux Additions: fixed compilation against Linux 3.2.0 Ubuntu kernels (4.2.12 regression as a side effect of the Debian kernel build fix; bug #11709) X11 Additions: reduced the CPU load of VBoxClient in drag'and'drop mode OS/2 Additions: made the mouse wheel work (bug #6793) Guest Additions: fixed problems copying and pasting between two guests on an X11 host (bug #11792) The full changelog can be found here. You can download binaries for Solaris, Linux, Windows and MacOS hosts at http://www.virtualbox.org/wiki/Downloads Technocrati Tags: Oracle Virtualization VirtualBox

  Read the article

• VirtualBox 3.2 is released! A Red Letter Day?

  - by Fat Bloke

  Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

  Read the article

• Can I provision half a core as a virtual CPU?

  - by ramdaz

  I am virtualization newbie. Please advise on these questions. Please note using a commercial VM software like Citrix or VMware is not a choice for me. I have at my disposal a couple of 2x 4 core servers with 32 GB RAM. I need to create 16 VMs on each server to test some web applications. Can I provision half a core as a virtual CPU for each VM? To my best knowledge I can't do so on Xen. Is it possible on KVM or some other free open source VM solution? If it's not possible to assign half a core, how do I ensure that uniform processing power is available for all VMs? Since the job is to create separate instances for hosting 16 web apps in a physical server, do you recommend setting up a private cloud using Ubuntu Enterprise Cloud as a better option? Is there HA solution under KVM, like Remus for Xen?

  Read the article

• How do i get list of software installed on offline VM's at the Main os ?

  - by Hitesh Wadekar

  Hi all, I want list of software installed on VM's & condition is those VM's are in Offline mode not in running mode and this list should display on main OS is it possible in KVM virtualization ? any input really appriataite !!!!

  Read the article

• virt-manager can't open the display

  - by MacUsers

  My virt-manager was working just fine and all of a sudden stopped working, throwing in error: RuntimeError: could not open display root@rakcal ~]# echo $DISPLAY localhost:10.0 [root@rakcal ~]# virt-manager Traceback (most recent call last): File "/usr/share/virt-manager/virt-manager.py", line 383, in <module> main() File "/usr/share/virt-manager/virt-manager.py", line 286, in main raise gtk_error RuntimeError: could not open display Has anyone seen this before? the same thing happen to "virt-viewer" as well: [root@rakcal ~]# virt-viewer winxp1 Cannot open display: Run 'virt-viewer --help' to see a full list of available command line options Does anyone know what might be the problem or if I'm missing anything? Reinstalling "virt-manager" didn't bring any good. Any help would be appreciated. Cheers!!

  Read the article

• Libvirt installation - Centos

  - by sethu

  I am currently using Centos 6. I want to use the latest version of libvirt (libvirt 0.9.4). The machine already has libvirt 0.8.1 installed . I did yum remove libvirt to remove the existing libvirt and I compiled 0.9.4 from source using : ./configure --prefix=/ make make install ldconfig /etc/init.d/libvirtd start After the installation is complete, I wanted to use the virsh interface. Once I enter virsh , I get : virsh /lib/libvirt.so.0: version 'LIBVIRT_PRIVATE 0.8.1' not found (required by virsh) Can somone let me know how to solve this issue? Correct me if I am doing something wrong. Thanks a lot ! Sethu

  Read the article

• Using virt-install to mount multiple cdrom drives/images

  - by Dana the Sane

  I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it, i.e.: Setup could not read the CD you inserted, or the CD is not a valid Windows CD.. Is there a work-around for this?, my Googling didn't uncover anything. I've tried various combinations of mounting .iso files and specifying disks, such as: $sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom --check-cpu If I try to specify multiple cdrom drives, I receive an error: virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 --check-cpu Starting install... ERROR IDE CDROM must use 'hdc', but target in use.

  Read the article

• What is the difference betweeen "Network install" and "Network Boot" options in virt-manager when installing a new virtual machine

  - by Marwan

  From my understanding of PXE (Preboot Execution Environment), I know that there must be some negotiation first between the booting client and a DHCP server to obtain network parameters (IP address, etc) in order for the client to be able to fetch the boot loader and kernel image from the boot server. In other words, and aside from being a "virtual" machine, we're talking here about a "bare metal" machine, so there must be some "pre boot" mechanism for those negotiations to take place, and this is exactly what PXE is all about. When I think about the "Network install" option, I can't figure out how the new VM would be able to fetch the boot images (bootloader and kernel) without the previously mentioned mechanism. So, here is a short version of the question: When provisioning a new virtul machine, how do you expect the "Network install" option in virt-manager to work behind the scenes? Many thanks.

  Read the article

• missing network usage through iptables

  - by Purres

  I inserted a rule to iptables to track the input usage to a certain ip address. The vps server's IP is 192.168.1.5 and the guest os's IP is 192.168.1.115. I ran 'yum update' inside the guest OS to get some network traffic. Then I ran iptables -vnL from the hypervisor. However it only showed network usage to the host, but not to the guest. Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target source destination 0 0 0.0.0.0/0 0.0.0.0/0 destination IP range 192.168.1.115-192.168.1.115 1853 114K 0.0.0.0/0 0.0.0.0/0 destination IP range 192.168.1.5-192.168.1.5 I ran tcpdump and the log showed that there're data packets to the guest os. 16:17:43.932514 IP mirrordenver.fdcservers.net.http > 192.168.1.115.34471: Flags [.], seq 17694667:17696115, ack 1345, win 113, options [nop,nop,TS val 1060308643 ecr 1958781], length 1448 16:17:43.932559 IP 192.168.1.115.34471 > mirrordenver.fdcservers.net.http: Flags [.], ack 17696115, win 15287, options [nop,nop,TS val 1958869 ecr 1060308643], length 0 Why the guest OS network usage couldn't be tracked? iptables -L will return the INPUT chain as following: Chain INPUT (policy ACCEPT) target prot opt source destination all -- anywhere anywhere destination IP range 192.168.1.115-192.168.1.115 all -- anywhere anywhere destination IP range 192.168.1.5-192.168.1.5 all -- anywhere anywhere

  Read the article

• Slow performance by PHP directory operations on virtual machine (Ubuntu libvirt)

  - by thonixx

  Some days ago I installed an Ubuntu server and two running virtual machines with libvirt. Everything works fine except one performance problem. Everytime when I call a PHP script with directory operations the operations are very slow and not performant. Here is an example: http://zother.white-tiger.ch/ And here you see an example without a directory operation and how fast it is: http://michaeltanner.ch/ It's all on the same virtual server. The virtual machine uses 6 cores (8 are available) and 7500 megabytes RAM (8 Gigabyte are available). The disk image format is qcow2. How can I improve the performance?

  Read the article

• qemu command not running directly

  - by Dr. Death

  Can I use "qemu://localhost/system " command directly inplace of "virsh -c qemu://localhost/system " command if my both machines are physically connected in a network as virsh will simply creating the virtual shell between two systems? can I use ssh in place of virtual shell here? I tried this but system gives no directory or file name for qemu even when i had qemu installed properly in my system. but when i use virsh i did not get such errors. Do i need to open any unix socket for doing this?

  Read the article

• Installing Windows 2003 over remote DRAC 4

  - by Delli

  I'm trying to install windows 2003 over a DRAC 4 console session by using a ISO file. But it keeps freezing during the GUI installation then when login back Windows Setup says some files not found and setup won't continue. What's the best approach to install Windows 2003 over a DRAC 4 console session?

  Read the article

• Install Windows Server 2008 Core on a Dell Optiplex 790

  - by Alex Marshall

  Does anybody have experience installing Windows Server 2008 Core on a Dell Optiplex 790? When I connect to the machine with the Hyper-V Manager Administrator snap-in, and try to create and run a virtual machine, I get the error "The Virtual Machine could not be started because the hypervisor is not running". I've disabled the Execute Disable functionality in the BIOS as was requried for other Dell models, but no matter what combination of security and virtualization settings I use on the machine, I can't get this working. EDIT: I've installed Windows Server 2008 Core on a Dell Optiplex 790, and I'm trying to install and setup a guest VM on the Hypervisor EDIT 2: The Hyper-V role is installed and configured, without any errors in the event log. Hardware-assisted virtualization is also enabled.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >