Search Results

Search found 680 results on 28 pages for 'loopback'.

Page 24/28 | < Previous Page | 20 21 22 23 24 25 26 27 28  | Next Page >

  • Flush kernel's TCP buffer with `MSG_MORE`-flagged packets

    - by timn
    send()'s man page reveals the MSG_MORE flag which is asserted to act like TCP_CORK. I have a wrapper function around send(): int SocketConnection_Write(SocketConnection *this, void *buf, int len) { errno = 0; int sent = send(this->fd, buf, len, MSG_NOSIGNAL); if (errno == EPIPE || errno == ENOTCONN) { throw(exc, &SocketConnection_NotConnectedException); } else if (errno == ECONNRESET) { throw(exc, &SocketConnection_ConnectionResetException); } else if (sent != len) { throw(exc, &SocketConnection_LengthMismatchException); } return sent; } Assuming I want to use the kernel buffer, I could go with TCP_CORK, enable whenever it is necessary and then disable it to flush the buffer. But on the other hand, thereby the need for an additional system call arises. Thus, the usage of MSG_MORE seems more appropriate to me. I'd simply change the above send() line to: int sent = send(this->fd, buf, len, MSG_NOSIGNAL | MSG_MORE); According to lwm.net, packets will be flushed automatically if they are large enough: If an application sets that option on a socket, the kernel will not send out short packets. Instead, it will wait until enough data has shown up to fill a maximum-size packet, then send it. When TCP_CORK is turned off, any remaining data will go out on the wire. But this section only refers to TCP_CORK. Now, what is the proper way to flush MSG_MORE packets? I can only think of two possibilities: Call send() with an empty buffer and without MSG_MORE being set Re-apply the TCP_CORK option as described on this page Unfortunately the whole topic is very poorly documented and I couldn't find much on the Internet. I am also wondering how to check that everything works as expected? Obviously running the server through strace' is not an option. So the only simplest way would be to usenetcat' and then look at its `strace' output? Or will the kernel handle traffic differently transmitted over a loopback interface?

    Read the article

  • SharpPcap issue

    - by Eyla
    This is my first time to use SharpPcap library. I created new project with VC# 2008 and I added SharpPcap as a reference to my project. I post a sample code to get interface of my pc but I'm getting this error: Error 1 The type or namespace name 'PcapDeviceList' could not be found (are you missing a using directive or an assembly reference?) C:\Users\Ali\Documents\Visual Studio 2008\Projects\Pcap\Pcap\Form1.cs 28 13 Pcap please advice to solve this problem. here is my code: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using SharpPcap; using SharpPcap.Packets; using SharpPcap.Protocols; using SharpPcap.Util; namespace Pcap { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void button1_Click(object sender, EventArgs e) { /* Retrieve the device list */ PcapDeviceList devices = SharpPcap.GetAllDevices(); /*If no device exists, print error */ if (devices.Count < 1) { Console.WriteLine("No device found on this machine"); return; } int i = 0; /* Scan the list printing every entry */ foreach (PcapDevice dev in devices) { /* Description */ label1.Text = "{0}) {1}" + i + dev.PcapDescription +"\n"+ /* Name */ "\tName:\t{0}" + dev.PcapName+"\n"+ /* IP Address */ "\tIP Address: \t\t{0}"+ dev.PcapIpAddress+"\n"+ /* Is Loopback */ "\tLoopback: \t\t{0}"+ dev.PcapLoopback; i++; } } } }

    Read the article

  • Bidirectional replication update record problem

    - by Mirek
    Hi, I would like to present you my problem related to SQL Server 2005 bidirectional replication. What do I need? My teamleader wants to solve one of our problems using bidirectional replication between two databases, each used by different application. One application creates records in table A, changes should replicate to second database into a copy of table A. When data on second server are changed, then those changes have to be propagated back to the first server. I am trying to achieve bidirectional transactional replication between two databases on one server, which is running SQL Server 2005. I have manage to set this up using scripts, established 2 publications and 2 read only subscriptions with loopback detection. Distributtion database is created, publishment on both databases is enabled. Distributor and publisher are up. We are using some rules to control, which records will be replicated, so we need to call our custom stored procedures during replication. So, articles are set to use update, insert and delete custom stored procedures. So far so good, but? Everything works fine, changes are replicating, until updates are done on both tables simultaneously or before changes are replicated (and that takes about 3-6 seconds). Both records then end up with different values. UPDATE db1.dbo.TestTable SET Col = 4 WHERE ID = 1 UPDATE db2.dbo.TestTable SET Col = 5 WHERE ID = 1 results to: db1.dbo.TestTable COL = 5 db2.dbo.TestTable COL = 4 But we want to have last change winning replication. Please, is there a way to solve my problem? How can I ensure same values in both records? Or is there easier solution than this kind of replication? I can provide sample replication script which I am using. I am looking forward for you ideas, Mirek

    Read the article

  • Trigger ad-hoc activity within a workflow

    - by Chris Taylor
    I am looking to use WF 4 to replace an existing workflow solution we have. One feature that is currently used in the existing workflow engine is the ability to cancel a current activity and loopback to a FlowSwitch type activity. So given the following crude workflow where we start at 'O' and base in the input data the workflow follows the path to 'A2' which is currently blocking on s bookmark waiting for input. ---------A1--\ | \ /\ \ O------- ---->--(A2)-------| ^ \/ / | | | / | | ---------A3--/ | | | |----------------------| However in the meantime some out of band data comes in that means we should cancel 'A2' and return to the FlowSwitch to re-evaluate based on the new data. The question is what is the best way to handle the out of band data that arrived? My initial guess is to have a Parallel activity with one branch waiting for out of band data and the other branch containing the workflow sequence described above. If data came in on the brach waiting for the out of band data, how would I cancel the current activity in the workflow and force it to return to the FlowSwitch. Or of course is there a better way to handle this. I have not actually done any work with the WF4 stuff for WF3 for that matter so I might be missing something obvious here.

    Read the article

  • Is this a good starting point for iptables in Linux?

    - by sbrattla
    Hi, I'm new to iptables, and i've been trying to put together a firewall which purpose is to protect a web server. The below rules are the ones i've put together so far, and i would like to hear if the rules makes sense - and wether i've left out anything essential? In addition to port 80, i also need to have port 3306 (mysql) and 22 (ssh) open for external connections. Any feedback is highly appreciated! #!/bin/sh # Clear all existing rules. iptables -F # ACCEPT connections for loopback network connection, 127.0.0.1. iptables -A INPUT -i lo -j ACCEPT # ALLOW established traffic iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # DROP packets that are NEW but does not have the SYN but set. iptables -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # DROP fragmented packets, as there is no way to tell the source and destination ports of such a packet. iptables -A INPUT -f -j DROP # DROP packets with all tcp flags set (XMAS packets). iptables -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # DROP packets with no tcp flags set (NULL packets). iptables -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # ALLOW ssh traffic (and prevent against DoS attacks) iptables -A INPUT -p tcp --dport ssh -m limit --limit 1/s -j ACCEPT # ALLOW http traffic (and prevent against DoS attacks) iptables -A INPUT -p tcp --dport http -m limit --limit 5/s -j ACCEPT # ALLOW mysql traffic (and prevent against DoS attacks) iptables -A INPUT -p tcp --dport mysql -m limit --limit 25/s -j ACCEPT # DROP any other traffic. iptables -A INPUT -j DROP

    Read the article

  • Forwarding HTTP Request with Direct Server Return

    - by Daniel Crabtree
    I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything.

    Read the article

  • CXF code first service, WSDL generation; soap:address changes?

    - by jcalvert
    I have a simple Java interface/implementation I am exposing via CXF. I have a jaxws element in my Spring configuration file like this: <jaxws:endpoint id="managementServiceJaxws" implementor="#managementService" address="/jaxws/ManagementService" > </jaxws:endpoint> It generates the WSDL from my annotated interface and exposes the service. Then when I hit http://myhostname/cxf/jaxws/ManagementService?wsdl I get a lovely WSDL. At the bottom in the wsdl:service element, I'll see <soap:address location="http://myhostname/cxf/jaxws/ManagementService"/> However, some time a day or so later, with no application restart, hitting that same url produces: This causes a number of problems, but what I really want is to fix it. Right now, there's a particular client to the webservice that sets the endpoint to localhost; because it runs on the same machine. Is it possible the wsdl is getting regenerated and cached and then exposing the 'localhost' version? In part I don't know the exact mechanism by which one goes from a ?wsdl request in CXF to the response. It seems almost certain that it's retrieving some cached version, given that it's supposed to be determining the address by asking the servletcontainer (Jetty). For reference I know a stopgap solution is using the hostname on the client and making sure an alias in place so that it goes over the loopback. EDIT: For reference, I confirmed that if I bring my application up and first hit it over localhost, then querying for the wsdl via the hostname shows the address as localhost. Conversely, first hitting it over the hostname causes localhost requests to show the hostname. So obviously something is getting cached here.

    Read the article

  • UDP packets are dropped when its size is less than 12 byte in a certain PC. how do i figure it out the reason?

    - by waan
    Hi. i've stuck in a problem that is never heard about before. i'm making an online game which uses UDP packets in a certain character action. after i developed the udp module, it seems to work fine. though most of our team members have no problem, but a man, who is my boss, told me something is wrong for that module. i have investigated the problem, and finally i found the fact that... on his PC, if udp packet size is less than 12, the packet is never have been delivered to the other host. the following is some additional information: 1~11 bytes udp packets are dropped, 12 bytes and over 12 bytes packets are OK. O/S: Microsoft Windows Vista Business NIC: Attansic L1 Gigabit Ethernet 10/100/1000Base-T Controller WSASendTo returns TRUE. loopback udp packet works fine. how do you think of this problem? and what do you think... what causes this problem? what should i do for the next step for the cause? PS. i don't want to padding which makes length of all the packets up to 12 bytes.

    Read the article

  • Can't get bonding and bridging to work for KVM

    - by user9546
    Hi everyone. I can't for the life of me get bonding and bridging to work for the KVM setup I'm building. I'm using a fresh install (not an upgrade) of Ubuntu Server 10.10. I have 4 NICs on the same subnet (two intended for each of my two VMs). I'm trying to achieve the setup that Uthark describes here. But following his guidelines didn't work for me. My eth0 and eth1 did not come up, and "brctl show" showed that br0 didn't have any interfaces (the bond). I assumed it didn't work because he's using 10.4, and this article says there's a recent change in bonding: [I can't post more than one hyperlink per post because I'm a newbie.] I had to use this article to get my interfaces to work at all on the same subnet, which is why I have the post-up lines on some of my interfaces: [I can't post more than one hyperlink per post because I'm a newbie.] I installed ifenslave and ethtool. I also created /etc/modprobe.d/aliases.conf with the following content: alias bond0 bonding options bonding mode=6 miimon=100 downdelay=200 updelay=200 And I included "bonding" in /etc/modules So, after several approaches, here is my latest interfaces file: auto lo iface lo inet loopback auto eth5 iface eth5 inet manual auto br5 iface br5 inet static post-up /sbin/ip rule add from [network].79 lookup 10 post-up /sbin/ip route add table 10 default via [network].1 src [network].79 dev br5 address [network].79 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth5 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth2 iface eth2 inet manual auto br2 iface br2 inet static post-up /sbin/ip rule add from [network].78 lookup 11 post-up /sbin/ip route add table 11 default via [network].1 src [network].78 dev br2 address [network].78 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth2 bridge_stp off bridge_fd 0 bridge_maxwait 0 iface eth0 inet manual iface eth1 inet manual auto bond0 iface bond0 inet static bond_miimon 100 bond_mode balance-alb up /sbin/ifenslave bond0 eth0 eth1 down /sbin/ifenslave -d bond0 eth0 eth1 auto br0 iface br0 inet static address [network].60 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports bond0 eth2, eth5, br2, and br5 all seem to be working fine. The only other thing I could find that looked suspicious is an error regarding bonding in /var/log/messages: kernel: [ 3.828684] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. even though there is a bond-miimon line in /etc/network/interfaces (if that's what they're talking about). Also, the bond seems to go in and out of promiscuous mode several times on boot: Jan 20 14:19:02 kvmhost kernel: [ 3.902378] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902390] device bond0 left promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902393] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902397] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.998990] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999005] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999008] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999012] device bond0 left promiscuous mode Any advice would be greatly appreciated. It seems that this must be possible, based on other posts, but I can't see what I'm doing wrong. Thanks.

    Read the article

  • The Raspberry Pi JavaFX In-Car System (Part 3)

    - by speakjava
    Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

    Read the article

  • Ubuntu 12.10 no network and no graphics

    - by khasiKoMasu
    I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

    Read the article

  • L2TP iptables port forward

    - by The_cobra666
    Hi all, I'm setting up port forwarding for an L2TP VPN connection to the local Windows 2003 VPN server. The router is a simpel Debian machine with iptables. The VPN server works perfect. But I cannot log in from the WAN. I'm missing something. The VPN server is using a pre-shared key (L2TP) and give's out an IP in the range: 192.168.3.0. Local network range is 192.168.2.0/24 I added the route: with route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13 (the vpn server) iptables -t nat -A PREROUTING -p udp --dport 1701 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 1701 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 500 -j ACCEPT iptables -t nat -A PREROUTING -p udp --dport 4500 -i eth0 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p udp --dport 4500 -j ACCEPT iptables -t nat -A PREROUTING -p 50 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 50 -j ACCEPT iptables -t nat -A PREROUTING -p 51 -j DNAT --to 192.168.2.13 iptables -A FORWARD -p 51 -j ACCEPT The whole iptables script is (without the line's from above): echo 1 > /proc/sys/net/ipv4/ip_forward echo 1 > /proc/sys/net/ipv4/tcp_syncookies #Flush table's iptables -F INPUT iptables -F OUTPUT iptables -F FORWARD iptables -t nat -F #Drop traffic iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT #verkeer naar buiten toe laten en nat aanzetten iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE #RDP forward voor windows servers iptables -t nat -A PREROUTING -p tcp --dport 3389 -i eth0 -j DNAT --to 192.168.2.10:3389 iptables -A FORWARD -p tcp --dport 3389 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 3340 -i eth0 -j DNAT --to 192.168.2.12:3340 iptables -A FORWARD -p tcp --dport 3340 -j ACCEPT #toestaan SSH verkeer iptables -t nat -A PREROUTING -p tcp --dport 22 -i eth0 -j DNAT --to-destination 192.168.2.1 iptables -A INPUT -p tcp --dport 22 -j ACCEPT #toestaan verkeer loopback iptables -A INPUT -i lo -j ACCEPT #toestaan lokaal netwerk iptables -A INPUT -i eth1 -j ACCEPT #accepteren established traffic iptables -A INPUT -i eth0 --match state --state RELATED,ESTABLISHED -j ACCEPT #droppen ICMP boodschappen iptables -A INPUT -p icmp -i eth0 -m limit --limit 10/minute -j ACCEPT iptables -A INPUT -p icmp -i eth0 -j REJECT ifconfig eth1 192.168.2.1/24 ifconfig eth0 XXXXXXXXXXXXX/30 ifconfig eth0 up ifconfig eth1 up route add default gw XXXXXXXXXXXXXXXXXXX route add -net 192.168.3.0 netmask 255.255.255.240 gw 192.168.2.13

    Read the article

  • BIND9 / DNS Zone / Dedicated Server / Unique Reverse DNS

    - by user2832131
    I locate a dedicated server in a datacenter with no DNS Zone setup. Datacenter panel have 1 textfield only you can fill one Reverse DNS only. According with datacenter instructions here... [instructions]: http://www.wiki.hetzner.de/index.php/DNS-Reverse-DNS/en#How_can_I_assign_several_names_to_my_IP_address.2C_if_different_domains_are_hosted_on_my_server.3F How_can_I_assign_several_names_to_my_IP_address ...I need to install BIND9 in order to configure other records like CNAME and MX. Ok, I've installed BIND9, created a Master Zone. And following this example, I put it in the Zone File: [example]: http://wiki.hetzner.de/index.php/DNS_Zonendatei/en example $ttl 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 1383411730 14400 1800 604800 86400 ) @ IN NS ns1.first-ns.de. @ IN NS robotns2.second-ns.de. @ IN NS robotns3.second-ns.com. localhost IN A 127.0.0.1 @ IN A 144.86.786.651 www IN A 144.86.786.651 loopback IN CNAME localhost But when I point my domain to ns1.first-ns.de, DNS Register says "time out". Am I missing something? I created a Master zone. Should it be a Slave zone? named.conf: include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; named.conf.options: options { directory "/var/cache/bind"; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; named.conf.local: zone "mydomain.com" { type master; file "/var/lib/bind/mydomain.com.hosts"; allow-update {any;}; allow-transfer {any;}; allow-query {any;}; }; named.conf.default-zones: zone "." { type hint; file "/etc/bind/db.root"; }; zone "localhost" { type master; file "/etc/bind/db.local"; }; zone "127.in-addr.arpa" { type master; file "/etc/bind/db.127"; }; zone "0.in-addr.arpa" { type master; file "/etc/bind/db.0"; }; zone "255.in-addr.arpa" { type master; file "/etc/bind/db.255"; }; Problem is that I'm moving my site, and can't update the new NS server due to a 'timeout' message when filling new datacenter NS. I'm filling: MASTER: ns1.first-ns.de SLAVE1: robotns2.second-ns.de SLAVE2: robotns3.second-ns.com

    Read the article

  • IIS 7.5 FTPS external access - 534 Policy requires SSL

    - by markmnl
    I have setup a FTP site that requires SSL but when I try connect to it externally I get the error: 220 Microsoft FTP Service 534 Policy requires SSL. I know - I set it so! Why doesnt it fetch the SSL cert from the site and allow me to logon?! (Incidentally beware of all the tutorials that Allow but do not Require SSL - while that will solve the problem it will be because SSL is not being used!). I suspect it may be I need a client that supports FTPS (FTP over SSL) and Windows explorer just uses IE which does not. But trying FileZilla and WinSCP I get a little further but then it hangs on TLS/SSL negotiation expecting a response from the server.... UPDATE: I have tried (from: http://learn.iis.net/page.aspx/309/configuring-ftp-firewall-settings/): Configure the Passive Port Range for the FTP Service. Configure the external IPv4 Address for a Specific FTP Site. Configure the firewall to allow the FTP service to listen on all ports that it opens. Disabling stateful FTP filtering so that Windows Firewall will not block FTP traffic. And still I get (in FileZilla trying both Active and Passive): Status: Connecting to 203.x.x.x:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: AUTH TLS Response: 234 AUTH command ok. Expecting TLS Negotiation. Status: Initializing TLS... Error: Connection timed out Error: Could not connect to server The Windows firewall logs unhelpfully have nothing to say.. UPDATE2: Turning the firewall off does not resolve the problem. I cannot believe how difficult it is to get something so simple to work and even once following the documentation it does not work. UPDATE3: Running FileZilla locally connecting through the loopback works in Active mode, in Passive mode I get up to: Command: LIST Response: 150 Opening BINARY mode data connection. Error: GnuTLS error -53: Error in the push function. Turning the firewall off at both ends I can still not connect the client and get the same error as above.

    Read the article

  • using own mail server with external domain and dns. Now have internal dns. dkim test not working

    - by mojotaker
    I am not very knowledgeable in this area, but have been able to make great head way. Now i am stuck I setup my own mail server, e.g mailbox.example.com. I had the domain dns point to my mail server in my office. i was able to set up everything working fine. such as dkim and spf records. Recently i decided to setup an internal dns server in the office so as to resolve some addresses for some development servers internally. Ok the problem now is my mail server is sitting on the internal dns server (the mail server is on the same box as the dns server) its still able to send and receive emails but not sure if dkim is working properly. when i try to do a dkim test "amavisd test keys" i get "invalid (public key: not available)" and i know that that means i have a dns issue. so what should i do? I am currently looking at my internal dns zonefile and i dont know what to do (i am using bind dns server on an ubuntu-server box). do i configure a dkim txt record on the local dns ? or is there a way to forward dkim "request" to the external dns ? or do i have this whole thing done wrong ? To be clear Basically my internal domain name is the same as my external domain name (i.e example.com) i have a mail server within my internal domain mailbox.example.com, that uses my external domain dns (external dns has been setup to point to my emailserver (which of course is now sitting behind my internal dns)) dkim (i dont think its working because it fails the dkim test") Need help in determing the proper setup What is the proper way to set this up ? thank you Update: Here is my local dns zone file ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA webserver.example.com. root.example.com. ( //dns and webserver on the same box 2012030809 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS webserver.example.com. @ IN A 192.168.1.117 @ IN AAAA ::1 ns IN A 192.168.1.117 www IN A xx.xx.xx.xxx // ip of external domain box (bluehost) work around to let local clients access website newsletter IN A xx.xx.xxx.117 // external ip address of local network mailbox.example.com. IN A 192.168.1.111 // internal ip of mailbox (mailserver webserver.example.com. IN A 192.168.1.117 //internal ip of a webserver

    Read the article

  • No network upsets gnome

    - by Darren Cook
    An issue that has been bothering me for over a year now. My notebook, running ubuntu 10.04, is almost all the time using a wired connection, with static IP address. And a remote DNS server. Network is configured with entries in /etc/network/interfaces and /etc/resolv.conf, rather than whatever the gnome UI tool was (*) But if I'm out, or simply unplug the network cable, a few things get weird. Specifically the gnome-panel stops working - it is still there, but isn't updating. And opening a nautilus window (e.g. to look at files on the local disk) has huge time-outs. By that I mean it will not open the window for something like 30 or 60 seconds; but when it does finally open it I can see the files and it is perfectly usable. Everything else works fine, alt-tab between windows, etc. I use the commandline to find the pid of gnome-panel, kill it, wait a couple of seconds, and it opens up a fresh panel which is normally usable. (Something like 10 minutes later it will have locked/crashed again; the same for the nautilus windows.) I'm guessing this is a DNS issue? Would setting up a local DNS server help? Guess number 2 was related to having a file server mount (samba, though running on another linux box), and symbolic links to files and directories on that file server on my desktop. My question is a bit vague... Does anyone recognize these symptoms, and have a suggestion? Or do you have some troubleshooting suggestions for narrowing down the problem? My /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myhost # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts 127.0.0.1 testsite.local #Other test website URLs here UPDATE: Some timings to open some desktop folder icons. This is after pulling out the network cable. A sub-directory of the desktop took 23 secs to open up. Content appears immediately (just 8 files, it has no further subdirectories). The home directory icon took 12 seconds to open up, but then took about 30 seconds for the files to appear. I closed it and tried again. This time it took 18 seconds to open up, but then 70 seconds before anything appeared. *: I couldn't work out how to use the gnome network tool for my needs, which include 3-4 static IPs for testing virtual hosts locally.

    Read the article

  • Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

    - by Srekel
    I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either.

    Read the article

  • Debian Apache2 SSL Issues - Error code: ssl_error_rx_record_too_long

    - by Tone
    I'm setting up apache on Debian lenny and having issues with SSL. I've been through numberous tutorials and i had this working on Ubuntu server, but for the life of me can't get anywhere with Debian. Port 80 (http) works fine, but port 443 (https) gives me the following error (in firefox) - homeserver is my hostname and my dhcp assigned ip is 192.168.1.109. I have a feeling it's something with my config and not with the cert/key generation. An error occurred during a connection to homeserver. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) Anyone see any issues with the following config files? /etc/apache2/sites-available/default-ssl <IfModule mod_ssl.c> <VirtualHost *:443> ServerAdmin webmaster@localhost ServerName homeserver DocumentRoot /var/www/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log LogLevel warn CustomLog /var/log/apache2/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> SSLEngine on SSLCertificateFile /etc/ssl/certs/server.crt SSLCertificateKeyFile /etc/ssl/private/server.key SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 </VirtualHost> </IfModule> /etc/apache2/ports.conf NameVirtualHost *:80 Listen 80 Listen 443 #<IfModule mod_ssl.c> # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here #Listen 443 #</IfModule> /etc/hosts 127.0.0.1 localhost 127.0.0.1 homeserver #192.168.1.109 homeserver #tried this but it didn't work # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts

    Read the article

  • Connectivity issues with dual NIC machine in EC2

    - by Matt Sieker
    I'm trying to get some servers set up in EC2 in a Virtual Private Cloud. To do this, I have two subnets: 10.0.42.0/24 - Public subnet 10.0.83.0/24 - Private subnet To bridge these two, I have a Funtoo instance with a pair of NICs: eth0 10.0.42.10 eth1 10.0.83.10 Which has the following routing table: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.83.0 * 255.255.255.0 U 0 0 0 eth1 10.0.83.0 * 255.255.255.0 U 203 0 0 eth1 10.0.42.0 * 255.255.255.0 U 202 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default 10.0.42.1 0.0.0.0 UG 0 0 0 eth0 default 10.0.42.1 0.0.0.0 UG 202 0 0 eth0 An elastic IP is attached to the eth0 interface, and I can connect to it fine remotely. However, I cannot ping anything in the 10.0.83.0 subnet. For now iptables is not set up on the box, so there's no rules that would get in the way (Eventually this will be managed by Shorewall, but I should get basic connectivity done first) Subnet details from the VPC interface: CIDR: 10.0.83.0/24 Destination Target 10.0.0.0/16 local 0.0.0.0/0 [ID of eth1 on NAT box] Network ACL: Default Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY   CIDR: 10.0.83.0/24 VPC: Destination Target 10.0.0.0/16 local 0.0.0.0/0 [Internet Gateway ID] Network ACL: Default (replace) Inbound: Rule # Port (Service) Protocol Source Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY Outbound: Rule # Port (Service) Protocol Destination Allow/Deny 100 ALL ALL 0.0.0.0/0 ALLOW * ALL ALL 0.0.0.0/0 DENY I've been trying to work this out most of the evening, but I'm just stuck. I'm either missing something obvious, or am doing something very wrong. I would think I'd be able to ping from either interface on this box without issue. Hopefully some more pairs of eyes on this configuration will help. EDIT: I am an idiot. After I bothered to install nmap to run some more tests, I discover I can see the ports, and connect to them, pings are just being blocked.

    Read the article

  • Virtual Network Interface and NAT disables localhost access for MySQL and Apache

    - by Interarticle
    I'm running an Ubuntu Server 12.04, and recently I configured it to do NAT for my laptop. Since the server has only one NIC, I followed instructions online to create a virtual network device (eth0:0) that has a LAN IP address, then further configured iptables and UFW to allow internet sharing. However, just a few days ago, I discovered that one of the PHP pages hosted on the server failed for no apparent reason. A little digging revealed that the MySQL server started refusing connections from localhost. The same happened with a page (PhpMyAdmin) that was configured to be accessible only from localhost (in Apache2). The error, as shown by $mysql --protocol=tcp -u root -p looks like ERROR 1130 (HY000): Host '<host name of eth0>' is not allowed to connect to this MySQL server However, the funny thing is, I configured the mysql server to allow root access from localhost (only). Moreover, the mysql server listens only on 127.0.0.1:3306, as shown by: sudo netstat -npa | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 1029/mysqld which means that the connection could have only come from 127.0.0.1 (Note that MySQL is working because I can still connect to it via unix domain sockets) In effect, it seems that all tcp connections originating from 127.0.0.1 to 127.0.0.1 appear to any local daemon to come from the eth0 IP address. Indeed, apache2 allowed me to access PhpMyAdmin after I added allow <eth0 IP address>. The following are my network configurations (redacted): /etc/hosts: 127.0.0.1 localhost 211.x.x.x <host name of eth0> <server name> #IPv6 Defaults follows .... /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.x.x.x netmask 255.255.255.0 gateway 211.x.x.x dns-nameservers 8.8.8.8 # dns-* options are implemented by the resolvconf package, if installed dns-search xxxxxxx.com hwaddress ether xx:xx:xx:xx:xx:xx auto eth0:0 iface eth0:0 inet static address 192.168.57.254 netmask 255.255.254.0 broadcast 192.168.57.255 network 192.168.57.0 /etc/ufw/sysctl.conf: #Uncommented the following lines net/ipv4/ip_forward=1 net/ipv6/conf/default/forwarding=1 /etc/default/ufw: DEFAULT_FORWARD_POLICY="ACCEPT" #Changed DROP to ACCEPT /etc/init/internet-sharing.conf (upstart script I wrote), section pre-start script: iptables -A FORWARD -o eth0 -i eth0:0 -s 192.168.57.22 -m conntrack --ctstate NEW -j ACCEPT iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT iptables -A POSTROUTING -t nat -j MASQUERADE Note again that my problem here is that programs cannot access localhost tcp services, from the server itself, and that access is blocked because the services have access control allowing only 127.0.0.1. I have no problem connecting (as in TCP connections) to services via tcp, even if the services listen only on 127.0.0.1. I do NOT want to connect to the services from another computer.

    Read the article

  • ubuntu mail server settings and /etc/hosts file

    - by mbrc
    This is my /etc/hosts file 127.0.0.1 localhost.localdomain localhost 127.0.1.1 ubuntu-server.xx.com ubuntu-server 193.77.xx.xx mail.xx.com mail # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters is this correct configuration for my mail server. I am behind router so i don't know if is ok to use my IP for mail.xx.com and 127.0.0.1 for localhost problem is that i can receive mail but when i send it i get Oct 17 21:29:32 ubuntu-server postfix/smtpd[2453]: warning: SASL authentication failure: Password verification failed Oct 17 21:29:32 ubuntu-server postfix/smtpd[2453]: warning: my.router[192.168.1.1]: SASL PLAIN authentication failed: authentication failure Oct 17 21:29:34 ubuntu-server postfix/smtpd[2453]: warning: my.router[192.168.1.1]: SASL LOGIN authentication failed: authentication failure EDIT: mabye is problem some port. i foward this ports. POP3 - port 110 IMAP - port 143 SMTP - port 25 HTTP - port 80 Secure SMTP (SSMTP) - port 465 Secure IMAP (IMAP4-SSL) - port 585 StartTLS - port 587 IMAP4 over SSL (IMAPS) - port 993 Secure POP3 (SSL-POP) - port 995 postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = amavis:[127.0.0.1]:10024 delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all inet_protocols = all mailbox_size_limit = 0 maximal_backoff_time = 8000s maximal_queue_lifetime = 7d message_size_limit = 0 minimal_backoff_time = 1000s mydestination = myhostname = mail.xx.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = /etc/mailname readme_directory = no receive_override_options = no_address_mappings recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_data_restrictions = reject_unauth_pipelining smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/private/mail.xx.com.crt smtpd_tls_key_file = /etc/ssl/private/mail.xx.com.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/maps/alias.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/maps/domain.cf virtual_mailbox_limit = 0 virtual_mailbox_maps = mysql:/etc/postfix/maps/user.cf virtual_uid_maps = static:5000 saslfinger -c version: 1.0.4ostfix Cyrus sasl configuration Ä mode: client-side SMTP AUTH -- basics -- Postfix: 2.9.3 System: Ubuntu 12.04.1 LTS \n \l -- smtp is linked to -- libsasl2.so.2 => /usr/lib/i386-linux-gnu/libsasl2.so.2 (0x00d3a000) -- active SMTP AUTH and TLS parameters for smtp -- relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes -- listing of /usr/lib/sasl2 -- total 28 drwxr-xr-x 2 root root 4096 okt 14 15:18 . drwxr-xr-x 72 root root 12288 okt 14 15:03 .. -rw-r--r-- 1 root root 1 maj 4 06:17 berkeley_db.txt -rw-r----- 1 root root 701 okt 14 15:18 saslpasswd.conf -rw-r----- 1 smmta smmsp 885 okt 14 15:18 Sendmail.conf -- listing of /etc/postfix/sasl -- total 12 drwxr-xr-x 2 root root 4096 okt 11 18:55 . drwxr-xr-x 4 root root 4096 okt 12 06:59 .. -rwx------ 1 root root 241 okt 11 18:55 smtpd.conf Cannot find the smtp_sasl_password_maps parameter in main.cf. Client-side SMTP AUTH cannot work without this parameter!

    Read the article

  • How to specify what network interface to use with TTCP or IPERF?

    - by Sammy
    The PC has two Gigabit Ethernet ports. They function as two separate network adapters. I'm trying to do a simple loopback test between the two. I've tried TTCP and IPERF. They're giving me hard time because I'm using the same physical PC. Using pcattcp... On the receiver end: C:\PCATTCP-0114>pcattcp -r PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Receive Test 0... TCP Receive Test Local Host : GIGA ************** Listening...: On TCPv4 0.0.0.0:5001 Accept : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 Buffer Size : 8192; Alignment: 16384/0 Receive Mode: Sinking (discarding) Data Statistics : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 16777216 bytes in 0.076 real seconds = 215578.95 KB/sec +++ numCalls: 2052; msec/call: 0.038; calls/sec: 27000.000 C:\PCATTCP-0114> On the transmitter end: C:\PCATTCP-0114>PCATTCP.exe -t 10.1.1.1 PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Transmit Test 0... TCP Transmit Test Transmit : TCPv4 0.0.0.0 -> 10.1.1.1:5001 Buffer Size : 8192; Alignment: 16384/0 TCP_NODELAY : DISABLED (0) Connect : Connected to 10.1.1.1:5001 Send Mode : Send Pattern; Number of Buffers: 2048 Statistics : TCPv4 0.0.0.0 -> 10.1.1.1:5001 16777216 bytes in 0.075 real seconds = 218453.33 KB/sec +++ numCalls: 2048; msec/call: 0.037; calls/sec: 27306.667 C:\PCATTCP-0114> It's responding alright. But why does it say 0.0.0.0? Is it passing through only one of the network adapters? I want 10.1.1.1 to be the server (receiver) and 10.1.1.2 to be the client (transmitter). These are the IP addresses assigned manually to each network adapter. How do I specify these addresses in TTCP? There is also the IPERF tool which has the -B option. Unfortunately I've been only able to use this option to bind the server to the 10.1.1.1 address. I was unable to bind the client to the 10.1.1.2 address. I might be doing it wrong. Can the -B option be used for both the server as well as the client side? What does the syntax look like for the client?

    Read the article

  • Mysql server fails to start

    - by Nicolas Thery
    Googling since two hours, I require your assistance. I'm on a Debian virtual machine and I cloned it. The only change is the new IP adress it has. Mysql doesn't start any more: Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! There is no process called mysql. All the mysql log files in /var/log are empty. here is my.cnf file : [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M general_log_file = /var/log/mysql/mysql.log log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M [mysqld_safe] syslog Here is the result of ifconfig : eth0 Link encap:Ethernet HWaddr 00:0c:29:12:98:9a inet adr:192.168.1.138 Bcast:192.168.1.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:754 errors:0 dropped:0 overruns:0 frame:0 TX packets:106 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:101177 (98.8 KiB) TX bytes:17719 (17.3 KiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B) As requested, here is the result of : sudo -u mysql mysqld, here is the result : root@debian:/home/nicolas/Bureau# sudo -u mysql mysqld 121004 14:26:57 [Note] Plugin 'FEDERATED' is disabled. mysqld: Can't find file: './mysql/plugin.frm' (errno: 13) 121004 14:26:57 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121004 14:26:57 InnoDB: Initializing buffer pool, size = 8.0M 121004 14:26:57 InnoDB: Completed initialization of buffer pool 121004 14:26:57 InnoDB: Started; log sequence number 0 70822697 121004 14:26:57 [Note] Recovering after a crash using /var/log/mysql/mysql-bin 121004 14:26:57 [Note] Starting crash recovery... 121004 14:26:57 [Note] Crash recovery finished. 121004 14:26:57 [ERROR] mysqld: Can't find file: './mysql/host.frm' (errno: 13) 121004 14:26:57 [ERROR] Fatal error: Can't open and lock privilege tables: Can't find file: './mysql/host.frm' (errno: 13)

    Read the article

  • FTP could not connect after applying local DNS(private DNS)

    - by Rahul
    I made a software router in CentOS linux and in that made a DNS server. I am using centOS 6..4 for making DNS i applied following steps: changed the host name = abc.zoom.com and domain name = zoom.com. then did changes in the named.rfc.1912 file as per rename named.localhost = forward and named.loopback = reverse in forward lookups i changed zone "zoom.com" IN { type master; file "forward"; allow-update { none; }; and in reverse lookups i changed zone "x.168.192.in-addr.arpa" IN { type master; file "reverse"; allow-update { none; }; and then did changes in the named.conf file options { listen-on port 53 {192.168.x.x;}; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; allow-query {any;}; recursion yes; 192.168.x.x is my local DNS address. then i copied lookups file in /var/named and edited the file "forward" $TTL 1D @ IN SOA abc.zoom.com. rahul.abc.zoom.com. ( 0 ; serial 1D ; refresh 1H ; retry 1W ; expire 3H ) ; minimum NS abc.zoom.com. abc A 192.168.x.x and for " reverse" $TTL 1D @ IN SOA abc.zoom.com. rahul.abc.zoom.com.( 0 ; serial 1D ; refresh 1H ; retry 1W ; expire 3H ) ; minimum NS abc.zoom.com. x PTR abc.zoom.com. when i put the public ip details in the Eth0 it was automatically redirect in to the resolve.conf when i checked through dig command the answer, query all were 1. my system is itself a Software router.In gateway of my all local machine i give my system ip address. however my DNS and Gateway IP is same. Now the problem is that. i gave the static ips to all my local machines when i give the DNS which i made i.e 192.168.x.x that time my ftp is not connect in filezilla software E.g: host : pqr.zoom.com ("zoom.com" is my local domain name) username : pqr password : pqr gives an error: Error: Connection timed out Error: Could not connect to server but if i give the public DNS address it get connected. i want to solve this problem please give solution on this.

    Read the article

  • DHCP server with multiple interfaces on ubuntu, destroys default gateway

    - by Henrik Kjus Alstad
    I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28  | Next Page >