Search Results

Search found 2726 results on 110 pages for 'processor'.

Page 24/110 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • Critical Threads Optimization

    - by Rafael Vanoni
    Background One of the more common issues we've been seeing in the field is the growing difficulty in optimizing performance of multi-threaded applications. A good portion of this difficulty is due to the increasing complexity of modern processors that present various degrees of sharing relationships between hardware components. Take any current CMT processor and you'll find any number of CPUs sharing execution pipelines, floating point units, caches, etc. Consequently, applying the traditional recipe of one software thread for each CPU will have varying degrees of success, according to the layout of the underlying hardware. On top of this increasing complexity we've also seen processors with features that aim at dynamically resourcing software threads according to their utilization. Intel's Turbo Boost allows processors to increase their operating frequency if there is enough thermal headroom available and the processor isn't fully utilized. More recently, the SPARC T4 processor introduced dynamic threading, allowing each core to dynamically allocate more resources to its active CPUs. Both cases are in essence recognizing that current processors will be running a wide mix of workloads, some will be designed for throughput, others for low latency. The hardware is providing mechanisms to dynamically resource threads according to their runtime behavior. We're very aware of these challenges in Solaris, and have been working to provide the best out of box performance while providing mechanisms to further optimize applications when necessary. The Critical Threads Optimzation was introduced in Solaris 10 8/11 and Solaris 11 as one such mechanism that allows customers to both address issues caused by contention over shared hardware resources and explicitly take advantage of features such as T4's dynamic threading. What it is The basic idea is to allow performance critical threads to execute with more exclusive access to hardware resources. For example, when deploying an application that implements a producer/consumer model, it'll likely be advantageous to give the producer more exclusive access to the hardware instead of having it competing for resources with all the consumers. In the case of a T4 based system, we may want to have a producer running by itself on a single core and create one consumer for each of the remaining CPUs. With the Critical Threads Optimization we're extending the semantics of scheduling priorities (which thread should run first) to include priority over shared resources (which thread should have more "space"). Now the scheduler will not only run higher priority threads first: it will also provide them with more exclusive access to hardware resources if they are available. How does it work ? Using the previous example in Solaris 11, all you'd have to do would be to place the producer in the Fixed Priority (FX) scheduling class at priority 60, or in the Real Time (RT) class at any priority and Solaris will try to give it more "hardware space". On both Solaris 10 8/11 and Solaris 11 this can be achieved through the existing priocntl(1,2) and priocntlset(2) interfaces. If your application already assigns these priorities to performance critical threads, there's no additional step you need to take. One important aspect of this optimization is that it requires some level of idleness in the system, either as a result of sizing the application before hand or through periods of transient idleness during runtime. If the system is fully committed, the scheduler will put all the available CPUs to work.Best practices If you're an application developer, we encourage you to look into assigning the right priorities for the different threads in your application. Solaris provides different scheduling classes (Time Share, Interactive, Fair Share, Fixed Priority and Real Time) that offer different policies and behaviors. It is not always simple to figure out which set of threads are critical to the performance of a workload, and it may not always be feasible to take advantage of this optimization, but we believe that this can be correctly (and safely) done during development. Overall, the out of box performance in Solaris should meet your workload's requirements. If you are looking into that extra bit of performance, then the Critical Threads Optimization may be what you're looking for.

    Read the article

  • Dell 3721 Wifi problem Ubuntu 13.04

    - by Sebastian
    I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

    Read the article

  • WiFi stops working after a while in Lenovo ThinkPad W520 (Ubuntu 12.04)

    - by el10780
    After several minutes(I do not know how many) there is no internet connection on my laptop via Wi-Fi.Ubuntu doesn't show any kind of message that my WiFi was disconnected neither there is a signal drop,but suddenly Firefox stops connecting to web pages.I checked my modem/router and it seems that it is working fine.I tried also to reboot the WiFi device and nothing happens.The only thing that it makes it work again is a reboot of the system and if I do not want to do a reboot then I am enforced to connect to the Internet using Ethernet cable.Does anybody know what is happening? ## Some Hardware info that might be helpful ## el10780@ThinkPad-W520:~$ sudo lshw -class network *-network description: Ethernet interface product: 82579LM Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 04 serial: f0:de:f1:f1:be:10 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.5.1-k duplex=full firmware=0.13-3 ip=192.168.0.10 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:50 memory:f3a00000-f3a1ffff memory:f3a2b000-f3a2bfff ioport:6080(size=32) *-network description: Wireless interface product: Centrino Advanced-N + WiMAX 6250 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 5e serial: 64:80:99:63:14:74 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=41.28.5.1 build 33926 ip=192.168.0.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:52 memory:f3900000-f3901fff *-network description: Ethernet interface physical id: 1 bus info: usb@2:1.3 logical name: wmx0 serial: 00:1d:e1:53:b2:e8 capabilities: ethernet physical configuration: driver=i2400m firmware=i6050-fw-usb-1.5.sbcf link=no el10780@ThinkPad-W520:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b4) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 (rev 5e) 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 08) 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller (rev 04) 0e:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) el10780@ThinkPad-W520:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no 3: i2400m-usb:2-1.3:1.0: WiMAX Soft blocked: yes Hard blocked: no The weirdest thing is this screenshot which I took after running the **Additional Drivers** program.I mean I have a NVidia Quadro 1000M and my Intel Centrino WiFi Card and this shows that there are not proprietay drivers for my system. http://imageshack.us/photo/my-images/268/screenshotfrom201207062.png/

    Read the article

  • 12.04 making BCM4313 card work with aircrack-ng?

    - by Charles Forest
    I'm a real Linux Noob, just started using it (this month) and until now i had no issues. now i'm trying to set-up aircrack-ng on my laptop, but it seems like it's using the worst card possible (or almost) there is a TON of tutorial on this card (seems to be hell to set-up) i have tryed some, but i ended up uninstalling my drivers, messing with my desktops, and ended by having no more "X" to close my windows (i have no clue how i ended there) i just re-installed my linux (took me 2 hours to setup everything again), but now i'm a bit "Scared" to try tutorials randomly again. Right now it says the driver is wl, wich is not the one i want (AFAIK it's not supported) i'm not sure what kind of informations are needed, but here's what i think could be usefull. lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel modules: i2c-i801 01:00.0 3D controller [0302]: NVIDIA Corporation GF108 [GeForce GT 540M] [10de:0df4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb WIRELESS CARD 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac REST... 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: r8169 Kernel modules: r8169 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) Subsystem: Samsung Electronics Co Ltd Device [144d:c0a5] Kernel driver in use: xhci_hcd Also, if i'm "screwed" with my hardware, just tell me.

    Read the article

  • How to safely copy an object?

    - by Prog
    This question is going to be a little long. Please bear with me. Something that happened in a project of mine made me think about how to safely copy objects. I'll present the situation I had and then ask a question. There was a class SomeClass: class SomeClass{ Thing[] things; public SomeClass(Thing[] things){ this.things = things; } // irrelevant stuff omitted public SomeClass copy(){ return new SomeClass(things); } } There was another class Processor that takes SomeClass objects, copies them (via someClassInstance.copy()), manipulates the copy's state, and returns the copy. Here it is: class Processor{ public SomeClass processObject(SomeClass object){ SomeClass copy = object.copy(); manipulateTheCopy(copy); return copy; } // irrelevant stuff omitted } I ran this, and it had bugs. I looked into these bugs, and it turned out that the manipulations Processor does on copy actually affect not only the copy, but also the original SomeClass object that was passed into processObject. I found out that it was because the original and the copy shared state - because the original passed it's field things into the copy when creating it. This made me realize that copying objects is harder than simply instantiating them with the same fields as the original. For the two objects to be completely disconnected, without any shared state, each of the fields passed to the copy also has to be copied. And if that object contains other objects - they have to be copied too. And so on. So basically, in order to be able to actually copy an object, each class in the system must have a copy() method, that also invokes copy() on all of it's fields, and so on. So for example, for copy() in SomeClass to work, it needs to look like this: public SomeClass copy(){ Thing[] copyThings = new Thing[things.length]; for(int i=0; i<things.length; i++) copyThings[i] = things[i].copy(); return new SomeClass(copyThings); } And if Thing has object fields of it's own, than it's own copy() method must be appropriate: class Thing{ Apple apple; Pencil pencil; int number; public Thing(Apple apple, Pencil pencil, int number){ this.apple = apple; this.pencil = pencil; this.number = number; } public Thing copy(){ // 'number' is a primitve. return new Thing(apple.getCopy(), pencil.getCopy(), number); } } And so on. Of course, instead of all classes having a copy() method, the copying mechanism can happen in all of the getters and the constructors of classes (unless places where it isn't suitable, for example when the field points to an external object, not to an object that 'is part' of this object). Still, that means that in order to be able to safely copy an object - most classes would have to have copying mechanisms in their getters. My question is divided into two parts: How frequently do you need to get a copy of an object? Is this a regular issue? Is the technique described common and/or reasonable? Or is there a better way to make safe copies of objects? Or is there an easier way to safely copy objects, without them sharing any state?

    Read the article

  • installer can't find partition, but fdisk can find them

    - by pxd
    I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

    Read the article

  • Rails3 and Paperclip

    - by arkannia
    Hi, I have migrated my application from rails 2.3 to rails3 and i have a problem with paperclip. I saw there was a branch for rails3 on paperclip git. So I added "gem 'paperclip', :git = 'git://github.com/thoughtbot/paperclip.git', :branch = 'rails3'" into the Gemfile and launch the command bundle install. Once paperclip installed, the upload worked fine but not the styles. I saw a hack to fix it. # in lib/paperclip/attachment.rb at line 293 def callback which #:nodoc: # replace this line... # instance.run_callbacks(which, @queued_for_write){|result,obj| result == false } # with this: instance.run_callbacks(which, @queued_for_write) end The styles are ok after that, but i'm not able to active the processor. My code is : has_attached_file :image, :default_url => "/images/nopicture.jpg", :styles => { :large => "800x600>", :cropped => Proc.new { |instance| "#{instance.width}x#{instance.height}>" }, :crop => "300x300>" }, :processors => [:cropper] My processor is located in RAILS_APP/lib/paperclip_processors/cropper.rb and contains : module Paperclip class Cropper < Thumbnail def transformation_command if crop_command and !skip_crop? crop_command + super.sub(/ -crop \S+/, '') else super end end def crop_command target = @attachment.instance trans = ""; trans << " -crop #{target.crop_w}x#{target.crop_h}+#{target.crop_x}+#{target.crop_y}" if target.cropping? trans << " -resize \"#{target.width}x#{target.height}\"" trans end def skip_crop? ["800x600>", "300x300>"].include?(@target_geometry.to_s) end end end My problem is that i got this error message : uninitialized constant Paperclip::Cropper The cropped processor is not loaded. Is anybody has an idea to fix that ? For information my application works fine on rails 2.3.4.

    Read the article

  • "Work stealing" vs. "Work shrugging"?

    - by John
    Why is it that I can find lots of information on "work stealing" and nothing on "work shrugging" as a dynamic load-balancing strategy? By "work-shrugging" I mean busy processors pushing excessive work towards less loaded neighbours rather than idle processors pulling work from busy neighbours ("work-stealing"). I think the general scalability should be the same for both strategies. However I believe that it is much more efficient for busy processors to wake idle processors if and when there is definitely work for them to do than having idle processors spinning or waking periodically to speculatively poll all neighbours for possible work. Anyway a quick google didn't show up anything under the heading of "Work Shrugging" or similar so any pointers to prior-art and the jargon for this strategy would be welcome. Clarification/Confession In more detail:- By "Work Shrugging" I actually envisage the work submitting processor (which may or may not be the target processor) being responsible for looking around the immediate locality of the preferred target processor (based on data/code locality) to decide if a near neighbour should be given the new work instead because they don't have as much work to do. I am talking about an atomic read of the immediate (typically 2 to 4) neighbours' estimated q length here. I do not think this is any more coupling than implied by the thieves polling & stealing from their neighbours - just much less often - or rather - only when it makes economic sense to do so. (I am assuming "lock-free, almost wait-free" queue structures in both strategies). Thanks.

    Read the article

  • Interfaces with structs, by reference using Generics

    - by Fraga
    I can't pass by reference an interface with a struct in it, what am I doing wrong? Here is the example code: class Processor<T> where T : new() { public Processor() { Data = new T(); } public T Data; } class PeriodsProcessor : Processor<Periods> { public PeriodsProcessor() { DataBase DB = new DataBase(); Console.WriteLine(Data.Value); DB.ModifyData<Period>(Data); Console.WriteLine(Data.Value); Console.ReadLine(); } } public class Period { public string Name; } public interface IDataTable<T> { string Value { get; set; } T Filter { get; set; } } [Serializable] public struct Periods : IDataTable<Period> { public string Value { get; set; } public Period Filter { get; set; } } public class DataBase { public void ModifyData<T>(IDataTable<T> data) where T : new() { data.Value = "CHANGE"; } } class Program { static void Main(string[] args) { PeriodsProcessor PeriodsProcessor = new PeriodsProcessor(); } }

    Read the article

  • BackgroundWorker and instance variables

    - by Alastair Pitts
    One thing that's always confused me is how a BackgroundWorker seems to have thread-safe access to the instance variables of the surrounding class. Given a basic class: public class BackgroundProcessor { public List<int> Items { get; private set; } public BackgroundProcessor(IEnumerable<int> items) { Items = new List<int>(items); } public void DoWork() { BackgroundWorker worker = new BackgroundWorker(); worker.RunWorkerCompleted += new RunWorkerCompletedEventHandler(worker_RunWorkerCompleted); worker.DoWork += new DoWorkEventHandler(worker_DoWork); worker.RunWorkerAsync(); } void worker_DoWork(object sender, DoWorkEventArgs e) { var processor = new ProcessingClass(); processor.Process(this.Points); //Accessing the instance variable } void worker_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { //Stuff goes here } } Am I erroneous in my assumption the the call to processor.Process(this.Points); is a thread-safe call? How don't I get a cross-thread access violation? I'm sure it's obvious, but it always has confused me.

    Read the article

  • Can't get RDFlib to work on windows

    - by john
    I have installed RDFlib 3.0 and everything that is needed, but when I run the following code I get an error. The code below is from: http://code.google.com/p/rdflib/wiki/IntroSparql. I have tried for hours to fix this but with no success. Can please someone help? import rdflib rdflib.plugin.register('sparql', rdflib.query.Processor, 'rdfextras.sparql.processor', 'Processor') rdflib.plugin.register('sparql', rdflib.query.Result, 'rdfextras.sparql.query', 'SPARQLQueryResult') from rdflib import ConjunctiveGraph g = ConjunctiveGraph() g.parse("http://bigasterisk.com/foaf.rdf") g.parse("http://www.w3.org/People/Berners-Lee/card.rdf") from rdflib import Namespace FOAF = Namespace("http://xmlns.com/foaf/0.1/") g.parse("http://danbri.livejournal.com/data/foaf") [g.add((s, FOAF['name'], n)) for s,_,n in g.triples((None, FOAF['member_name'], None))] for row in g.query( """SELECT ?aname ?bname WHERE { ?a foaf:knows ?b . ?a foaf:name ?aname . ?b foaf:name ?bname . }""", initNs=dict(foaf=Namespace("http://xmlns.com/foaf/0.1/"))): print "%s knows %s" % row The error I get is: Traceback (most recent call last): File "...", line 18 in <module> initNs=dict(foaf=Namespace("http://xmlns.com/foaf/0.1/"))): TypeError: query() got an unexpected keyword argument 'initNS'

    Read the article

  • Not delete params in URL, when sorting [ RAILS 3 ]

    - by kamil
    I have sortable table columns, made like that http://asciicasts.com/episodes/228-sortable-table-columns And I have simply filter options for two columns in table, made at select_tag (GET method). This two function don't work together. When I change filter, the sort parameter disappear and inversely. <th><%= sortable "Id" %></th> <th> Status<br/> <form method="get"> <%= select_tag(:status, options_for_select([['All', 'all']]+@statuses, params[:status]),{:onchange => 'this.form.submit()'}) %> </th> <th><%= sortable "Operation" %></th> <th> Processor<br/> <%= select_tag(:processor, options_for_select([['All', 'all']]+@processor_names, params[:processor]),{:onchange => 'this.form.submit()'}) %> </form> </th>

    Read the article

  • Concept: Is mongo right for applying schemas?

    - by Jan
    I am currently in charge of checking wether it is valuable for one of our upcoming products to be developed on mongo. Without going too much into detail, I'll try to explain, what the app does. The app simply has "entities". These entities are technical stuff, like cell phones, TVs, Laptops, tablet pcs, and so forth. Of course, a cell phone has other attributes than a Tablet PCs and a Laptop has even other attributes, like RAM, CPU, display size and so on. Now I want to have something that we wanna call a scheme: We define that we need to have saved the display size, amount of ram size of flash devices, processor type, processor speed and so on for tablet pcs. For cell phone we might save display size, GSM, Edge, 3g, 4g, processor, ram, touch screen technology, bla bla bla. I think you got it :) What I want to realize is, that each "category" has a schema and when one of the system's users enters a new product (let's say the new iphone 4), the app constructs the form to be filled out with the appropriate attributes. So far it sounds nice and should not be a problem with mongo. But now the tough for which I could not find a clean solution.... An attribute modeled in mongo looks like: { _id: 1234456, name: "Attribute name", type: 0, "description" } But what to do, if i need this attribute in several languages, like: { en: {name: "Attribute name", type: 0, "description"}, de: {name: "Name des Attributs, type: 0, "Beschreibung"} } I also need to ensure that the german attribute gets updated as soon as the english gets updated, for instance when type changes from 0 to 1. Any ideas on that?

    Read the article

  • A basic load test question

    - by user236131
    I have a very basic load test question. I am running a load test using VSTS 2008 and I have test rig with controller + 10 agents. This load test is against a SharePoint farm I have. My goal of the load test is to find out the resource utilization on web+app+db tiers of my farm for any given load scenario. An example of a load scenario is Usage profile: Average collaboration (as defined by SCCP) User Load: 500 (using step load pattern=a step of 50 every 2 mins and a warm up time of 2mins for every step) Think time: 0 Load duration: 8hrs Now, the question is: Is it fair to expect that metrics like Requests/sec, %processor time on web front end / App / DB, Test/sec, and etc become flat or enter a steady state at one point in time during the load test. Like I said, the goal is not to create a bottleneck but to only measure the utilization of resources by the above load profile. I am asking this question because I see something different. At one point in the load test, requests/sec becomes more or less flat. But processor utilization on the web/DB servers keeps increasing. After digging through the data a bit, I see that "tests running" counter also steadily increased over time. So, if I run the load test for more than 8hrs, %processor may go up further. This way, I don't know what to consider as the load excreted by the load profile. What does this "tests running" counter really signify? How is this different from tests/sec? Another question is: how can I find out why "tests running" counter shows an increase overtime? Thanks for your time

    Read the article

  • Help me choose a desktop: which of these two should I buy?

    - by Sammy
    I just want the more powerful of the two: Choice 1: http://www.bestbuy.com/site/Gateway+-+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9698936.p?id=1218153428687&skuId=9698936 Choice 2: /site/HP+-+Pavilion+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9694506.p?id=1218150609828&skuId=9694506 I can't post more than one hyperlink since I am a new user, so please add bestbuy domain name before choice 2. The latter choice is a bit more expensive but not by much so I don't care about that. As for what I intend to use my machine for, just regular web surfing, light gaming, web development related work, etc. But that doesn't really matter, of these two I just want to know which is the better more powerful system and which you would buy if you were in my position.

    Read the article

  • nice linux distro for vxl itona

    - by akiva_eshbal
    I'm trying to have some productivity with my VXL ITONA thin client. it is very minimalistic: 128 MB disk, 64 MB ram, with an Ezra via processor. out of the box it comes with GIO linux, I could run from a USB key puppy linux and damnsmalllinux (but I couldn't make them installed on the SSD drive). more customizable distros like arch-linux and slax fail to load due to kernel failure caused by lack of cmov instruction in the VIA processor. I really like to make it usable, can you please recommend me a nice distro? I'm afraid the Gentoo solution is too scary for me right now (compiling a linux kernel over a a thin client is too much) thanks!

    Read the article

  • Ubuntu suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Windows 7 crashes with STOP 0x101 ("A clock interrupt was not received..") every time the laptop tri

    - by Blorgbeard
    I have an HP Compaq nc8430 with a new install of Windows 7 (32 bit). Every time I sleep the laptop, it crashes. It also crashes sometimes just during normal use. It does hibernate properly. The only reliable trigger I've found to crash it is sleep mode. It's not overclocked, and only standard drivers are installed. It seems to always be the following error: A clock interrupt was not received on a secondary processor within the time interval. And the following STOP code: STOP: 0x00000101 (0x00000061, 0x00000000, 0x80DBF120, 0X00000001) I'm not sure it's always the same parameters exactly, but always seems to be error 101. Given the text of the error message, I've disabled the Dual Core option in BIOS, and this appears to have fixed it - no crashes so far, and it sleeps ok now. However, I'd love a solution that doesn't involve cutting processor performance in half. Any suggestions?

    Read the article

  • Ubuntu/Windows suddenly freezes

    - by tapan
    I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

    Read the article

  • Why are my uWSGI processes dying immediately?

    - by orokusaki
    I'm using Supervisor and the uWSGI Emperor mode. When I set limit-as to 512 (MB), workers die instantly (respawn, die, respawn, die, every 3/4 of a second or so): [uwsgi] workers = 4 threads = 40 limit-as = 512 harakiri = 20 max-requests = 1600 ... non-performance/memory/processor-related settings ommitted But, if I change limit-as to: [uwsgi] workers = 4 threads = 40 limit-as = 1024 harakiri = 20 max-requests = 1600 ... non-performance/memory/processor-related settings ommitted and restart uwsgi, the problem is gone immediately. In order to put a sham in this, I've modified the setting back to 512, restarted again, and the problem is back immediately. Notes: My app is a simple Django app without much additional Python setup during start-up time.

    Read the article

  • OSX 10.6.6 SSH md5 break-in check

    - by Alex
    Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

    Read the article

  • MSSQL 2008 License for both Web application and desktop application

    - by Bayonian
    I have ASP.NET web application using MSSQL express at the moment. But I want to use MSSQL 2008. But I'm NOT sure about what kind of license I should buy. I'm considering the Processor License according to this document. I'm not sure if it's the right choice. If I buy User CAL. should I buy only 1 CAL for my web application? or for all visitors who visit my web site? I also have a Windows desktop application that write/read data from the server. Do I need a seperate license with for this Windows application if I buy Processor License. Thank you for suggestion.

    Read the article

  • Selection between two laptops for casual gaming [closed]

    - by Prabhpreet
    I have selected two laptops that meet my budget. Here are the differences: Laptop #1: 4GB Ram, Intel Core i5 2450M 2nd Gen processor w/ 2.5 Ghz clockspeed NVIDIA GeForce GT 520MX DDR3 1 GB Dedicated Graphics 750 GB SATA II Hard disk USB 2.0 Ports 6 hrs battery life Laptop #2: 4 GB Ram, Intel Core i5 3210M 3rd Gen processor w/ 2.5 Ghz clockspeed Integrated Intel HD Graphics 4000 500 GB SATA Hard disk USB 3.0 Ports 3 hrs battery life (This concerns me) First and foremost, does dedicated graphics matter for a casual gamer like me? Secondly, does the generation of the processors make a difference despite the same clockspeed. Thirdly, do usb 3.0 ports make a difference? And lastly, which laptop is more future proof? Please help me out. Thanks!

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >