Search Results

Search found 10530 results on 422 pages for 'remote administration'.

Page 24/422 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Remote support via VPN without split tunnel

  - by Robe Eleckers

  my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

  Read the article

• Remote desktop sessions - Unwanted automatic log off after period of time

  - by alex

  I'm having an issue whenever I connect to any of our servers via RDP - After a certain period of time, it seems to close these sessions, closing all the applications i had open etc... This is particularly annoying if I am running a long process - for example, copying a file - it cuts it off... I then re-connect via RDP, and it effectively loads a new session. Is this set somewhere in Group Policy? Or somewhere else? This is happening on Windows 2008 (it may also be on our 2003 servers, although I haven't noticed...)

  Read the article

• Alternative to Microsoft Remote Desktop Connection for Mac?

  - by Adam Tuttle

  When working from Windows, I prefer to use RoyalTS instead of the default Microsoft RDP client, because it allows me to save multiple connections, the credentials of the connection, etc; as well has having more than 1 connection open at a time. Is there a similar (or any) alternative to the Microsoft RDP client for connecting from OSX to Windows? Aside from VNC, that is; at this point I'm hoping to continue using the RDP protocol.

  Read the article

• error on remote connection to mysql

  - by Ahmet vardar

  Hi, I ve been trying to connect my dedicated server mysql db from my computers localhost my code is here; $dbhost = 'domain.com'; $dbuser = 'username'; $dbpass = 'pass'; $conn = mysql_connect($dbhost, $dbuser, $dbpass) or die('Could not connect: ' . mysql_error()); $dbname = 'dbname'; mysql_select_db($dbname); I get that error Could not connect: Lost connection to MySQL server at 'reading initial communication packet', system error: 61 Dedicated server is Linux centos 64 bit, php 3.2.4, mysql 5.1.54 Is there any workaround that ? Thanks

  Read the article

• Solution for secure online remote presentation?

  - by Greg Joshner

  Hello, what is your (subscription free) solution to share a presentation with a number of users (below 50) that works without plug-ins in a browser and allows the presentation to be centrally controlled (and thus prevents participating users from "flipping forward")? I won't need print, save as or offline features, just showing and controlling a presentation centrally. Thanks a lot for your help!

  Read the article

• Remote running program from server

  - by Armen Khachatryan

  Hello, I have Windows serrver 2008 and more computers in it domain. all i need is to run program from server in all comps , for example install kaspersky for all comps. can i do it? thanks

  Read the article

• Remote Desktop to home server: From mac gives english keyboard layout, from pc gives norwegian layou

  - by format71

  I'm trying to connect to my home server from my mac, but struggle with typing the password, which contains a plus sign. I have a norwegian keyboard layout, and when I log in from windows (via wmware), I get a norwegian keyboard at the logon screen, but when I connect directly from the mac, I get a english keyboard layout, which makes it impossible to type my password... Why does it give me a different layout for the mac? How can I type a plus sign? The key that should give me a plus sign if the keyboard was english, is the key that contains the ´ and `, and using this button doesn't give me anything in the login prompt... regards, -Vegar

  Read the article

• How to find username on remote computer?

  - by Neil

  I have the IP addresses of some computers on my network. Is there any command line tool like PsExec, which can take the IP Address as input and find out the username of the currently logged in user? I can install stuff on my workstation, but not the others. I can also run Metasploit / NMap / any other such program on my workstation.

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• Remote execution in a domain environment

  - by T. Crancker

  I have a windows domain environment and it contains only Server 2008 Os's. I'm trying to execute a script or a program from 1 server on multiple servers, but I can't configure or install any applications. I was trying to user powershell v2.0 (invoke-command) but its not configured and I cant configure it. I'm looking for an alternative maybe WMI. Psexec and rcmd are not installed on any servers. Any advise could help a lot.

  Read the article

• Strange RDP / Remote Desktop problem

  - by John Landheer

  I'll try to be as specific as I can be: Server is running SBS 2008 R2 (with all updates) Server is connected to the internet Server has 2 NIC's, one is disabled Server is running RDP Service (accessible directly from the internet, I know, not as secure as it should be) Computers A and B are on the same local net. Computers A and B are both Windows 7. Users X and Y are both admins on the server Computer A can connect as user X to the server with mstsc Computer A can connect as user Y to the server with mstsc Computer B can connect as user X to the server with mstsc Computer B CANNOT connect as user Y to the server with mstsc! Error that username/password is incorrect. The last point is the problem, I get an authentication error. This used to work flawlessly for the last year. The server and desktops have been rebooted. EDIT: I tried: prefixing domain to the username prefixing the server computer name to the username change the password copy/paste the password from notepad to make sure it was correct I find it very strange.... EDIT: The computers are not on the same subnet as the server. The server is at my hosting provider. All computers as all users can reach the web app that is running on the server.

  Read the article

• Camtasia on remote computer?

  - by daughtkom

  I have a need to use one laptop for a live presentation (with projector, etc.), but record that presentation on another laptop -- similar to what I can do with Camtasia, only with the recording happening on another laptop. Is this possible? What do I need to do this? Some VGA device that goes between the presenting machine and the projector? Some USB device? My ideal requirements: The machines must be "standard" laptops (so I can't just add a new card to a desktop, etc.). I prefer a hardware solution, but cannot involve studio type equipment. I'd prefer not to install Camtasia (or similar) on the presenting machine for two reasons: licensing issues performance issues (sometimes the presentations are machine intensive and I don't want the recording software to interfere with the presentation) I'd appreciate any tips. Thanks.

  Read the article

• Remote script execution on Windows 2003 server - alternatives to PSEXEC

  - by chickeninabiscuit

  We are wanting to deploy our application to our Test server from our Hudson server. I'd like to be able to have hudson copy the application files and start a script that would run locally on our Test server. We can't use psexec because of a cross domain policy. Currently we are doing this manually, by RDPing to the Test server and checking out the code from subversion manually. Are there alternatives to PSExec that can bypass the cross domain policy problem?

  Read the article

• Remote Desktop Log?

  Is there a log or some other way to tell who has remoted in to my (xp) machine?

  Read the article

• users connecting to remote desktop to use software

  - by Jordan

  Im an IT assistant at a CNC milling company and we use a program called made2manage. Its an ERP (enterprise resource management) software. Each license is something like 5k and instead of giving each employee there own copy of the software he has everyone that uses the program connect to a server that has a copy of m2m on it. Its slow when there are a bunch of people connected to it. But I guess they dont want to buy more licenses. Is there a better way to do something like this? How bad of a practice is this?

  Read the article

• Remote Control Home PC from Corporate Work PC

  - by muncherelli

  Here is my situation: I am currently on a Windows XP workstation at work. I have an android tablet that I use to splashtop into my home PC. I would like to be able to use my work keyboard and mouse to control my home PC while I am splashtop'd into it using my tablet. My work PC is on a corporate LAN, and not on the same network as my tablet. The company I work for provides wifi for personal devices, but they are not accessable to the internal network. I thought about going the Synergy route, however that would require my home PC to be able to connect to my work PC which isn't really possible. The opposite would work though, if I could reverse connect the server to the client, but the Synergy software doesn't really support that. I do have a couple linux boxes running at home, so I can ssh into my home network and tunnel ports via SSH if needed. With what I have, how can I accomplish seamless keyboard and mouse sharing between my work PC and either my home PC or my android tablet?

  Read the article

• Setting Remote Desktop to allows IPv6 connections

  - by Garrett

  Setup: Basically I have 3 machines (2 virtual and 1 physical) that I would like to be able to RDP in to from outside my NAT (a router). The VMs are Windows 7 and Windows XP, both fully patched with Teredo installed and working, both running in VirtualBox (their host also has Teredo working, though I'm not sure if that matters). They both have bridged network adapters with promiscuous mode enabled. The physical machine is Windows 7 fully patched with an HFS server running on it and a dynamic DNS set up for my public IPv4 address and port forwarded. It also has Teredo installed and working. Symptoms: According to http://test-ipv6.com/ all 3 have public IPv6 addresses, and they can all connect to http://ipv6.google.com/. I can ping the XP VM from the host it's running on but I cannot ping it from any other machine. Also, I cannot ping either of the other machines from anywhere. I cannot connect to any of them over RDP from IPv6, however I can connect to all of them through IPv4. Any ideas what is going wrong?

  Read the article

• Remote access to phpmyadmin from computer belongs to same LAN

  - by Charles

  OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

  Read the article

• Solutions for exporting a remote desktop app (display and audio)

  - by Richard

  I'm looking for a solution that will allow me to export a desktop app running on a server to a client machine. The server is ideally Linux, the desktop is Windows (+Mac for icing on the cake). The export should be encrypted and I need to support multiple clients from one server. I only want to export an individual app, not a whole desktop, and ideally am looking for open source solutions. The obvious, cheapest, simplest choice is to use X tunnelled over ssh (e.g using Xming on the desktop) but X doesn't support audio. What are the alternatives? Or is there a way to support audio using X or in parallel to X? Thanks

  Read the article

• How can I send a Ctrl+Alt+Delete through Remote Desktop in Windows 8?

  - by Tanner

  I need to send a CtrlAltDelete to a remote machine through Remote Desktop. The CtrlAltDelete is being intercepted by Windows 8, regardless of whether the remote desktop has focus or is in full screen. I'm remoting in to a Windows XP machine, and I've tried launching Remote Desktop through both the desktop and the Modern UI. How can I send a CtrlAltDelete? I'd rather not install anything on the machine.

  Read the article

• Alternative to Microsoft Remote Desktop Connection for Mac?

  - by Adam Tuttle

  When working from Windows, I prefer to use RoyalTS instead of the default Microsoft RDP client, because it allows me to save multiple connections, the credentials of the connection, etc; as well has having more than 1 connection open at a time. Is there a similar (or any) alternative to the Microsoft RDP client for connecting from OSX to Windows? Aside from VNC, that is; at this point I'm hoping to continue using the RDP protocol.

  Read the article

• Remote Desktop to a user while still logged on

  - by Jonathan

  Is there a way to connect remotely to another user while there is a user still on the same PC. So one PC with users and both of them logged in at the same time, one locally and one remotely? Sorry i didn't explain my question very well, I don't mean 2 users viewing the same screen. I mean 2 user accounts. Say UserA is sitting at the desk on his account. and then UserB is on his account account but it remotely connecting to it. So they both have different desktops in front on their respective screens.

  Read the article

• Why does remote desktop connection flash from one PC but not others?

  - by Randy Orrison

  I have 20 PCs (Windows XP) in remote locations connecting to the same server (Windows Server 2003) using Remote Desktop over a VPN. On just one of the PCs the remote desktop screen flashes (redraws) multiple times after connecting, the others don't. The screen resolution is the same: local is 800x600 32bit; RDP file is set to full screen, 256 color; remote when connected is 800x600 8bit color. Any suggestions what the problem might be, or what to investigate next?

  Read the article

• seamless mode remote desktop connection from linux to windows

  - by mateusz.fiolka

  I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

  Read the article

• I can't connect to mysql on a remote server

  - by eisaacson

  I'm trying to connect from an Ubuntu server to a RHEL6 server using mysql. I've tried telneting into the server as well as trying to connect with mysql. I've tried commenting out the bind-address but didn't have any success with that either. I don't get an error code or anything with telnet. It just fails after a minute or so. With mysql, I get this error code ERROR 2003 (HY000): Can't connect to MySQL server on 'SERVER_IP' (111). "SERVER_IP" is of course a placeholder where actual error gives that actual IP. I've included my my.cnf as well as well as my iptables from the destination server. On Destination Server... my.cnf: [mysqld] bind-address=0.0.0.0 tmp_table_size=512M max_heap_table_size=512M sort_buffer_size=32M read_buffer_size=128K read_rnd_buffer_size=256K table_cache=2048 key_buffer_size=512M thread_cache_size=50 query_cache_type=1 query_cache_size=256M query_cache_limit=24M #query_alloc_block_size=128 #query_cache_min_res_unit=128 innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_file_per_table innodb_log_files_in_group=2 innodb_buffer_pool_size=32G innodb_log_file_size=512M innodb_additional_mem_pool_size=20M join_buffer_size=128K max_allowed_packet=100M max_connections=256 wait_timeout=28800 interactive_timeout=3600 # modify isolation method for faster inserting. # Do not uncomment the line below unless you understand what this does. # transaction-isolation = READ-COMMITTED # do not reverse lookup clients skip-name-resolve #long_query_time=6 #log_slow_queries=/var/log/mysqld-slow.log #log_queries_not_using_indexes=On #log_slow_admin_statements=On datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 #Added by Magento ECG long_query_time=1 slow_query_log [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid iptables: :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 225 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp -i eth1 --dport 11211 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT sudo netstat -ntpl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:11211 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:2123 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:1581 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 :::11211 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 :::225 :::* LISTEN -

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >