Search Results

Search found 682 results on 28 pages for 'semi'.

Page 24/28 | < Previous Page | 20 21 22 23 24 25 26 27 28  | Next Page >

• Code Golf: Evaluating Mathematical Expressions

  - by Noldorin

  Challenge Here is the challenge (of my own invention, though I wouldn't be surprised if it has previously appeared elsewhere on the web). Write a function that takes a single argument that is a string representation of a simple mathematical expression and evaluates it as a floating point value. A "simple expression" may include any of the following: positive or negative decimal numbers, +, -, *, /, (, ). Expressions use (normal) infix notation. Operators should be evaluated in the order they appear, i.e. not as in BODMAS, though brackets should be correctly observed, of course. The function should return the correct result for any possible expression of this form. However, the function does not have to handle malformed expressions (i.e. ones with bad syntax). Examples of expressions: 1 + 3 / -8 = -0.5 (No BODMAS) 2*3*4*5+99 = 219 4 * (9 - 4) / (2 * 6 - 2) + 8 = 10 1 + ((123 * 3 - 69) / 100) = 4 2.45/8.5*9.27+(5*0.0023) = 2.68... Rules I anticipate some form of "cheating"/craftiness here, so please let me forewarn against it! By cheating, I refer to the use of the eval or equivalent function in dynamic languages such as JavaScript or PHP, or equally compiling and executing code on the fly. (I think my specification of "no BODMAS" has pretty much guaranteed this however.) Apart from that, there are no restrictions. I anticipate a few Regex solutions here, but it would be nice to see more than just that. Now, I'm mainly interested in a C#/.NET solution here, but any other language would be perfectly acceptable too (in particular, F# and Python for the functional/mixed approaches). I haven't yet decided whether I'm going to accept the shortest or most ingenious solution (at least for the language) as the answer, but I would welcome any form of solution in any language, except what I've just prohibited above! My Solution I've now posted my C# solution here (403 chars). Update: My new solution has beaten the old one significantly at 294 chars, with the help of a bit of lovely regex! I suspected that this will get easily beaten by some of the languages out there with lighter syntax (particularly the funcional/dynamic ones), and have been proved right, but I'd be curious if someone could beat this in C# still. Update I've seen some very crafty solutions already. Thanks to everyone who has posted one. Although I haven't tested any of them yet, I'm going to trust people and assume they at least work with all of the given examples. Just for the note, re-entrancy (i.e. thread-safety) is not a requirement for the function, though it is a bonus. Format Please post all answers in the following format for the purpose of easy comparison: Language Number of characters: ??? Fully obfuscated function: (code here) Clear/semi-obfuscated function: (code here) Any notes on the algorithm/clever shortcuts it takes.

  Read the article

• How to pass the 'argument-line' of one PowerShell function to another?

  - by jwfearn

  I'm trying to write some PowerShell functions that do some stuff and then transparently call through to existing built-in function. I want to pass along all the arguments untouched. I don't want to have to know any details of the arguments. I tired using 'splat' to do this with @args but that didn't work as I expected. In the example below, I've written a toy function called myls which supposed to print hello! and then call the same built-in function, Get-ChildItem, that the built-in alias ls calls with the rest of the argument line intact. What I have so far works pretty well: function myls { Write-Output "hello!" Invoke-Expression("Get-ChildItem "+$MyInvocation.UnboundArguments -join " ") } A correct version of myls should be able to handle being called with no arguments, with one argument, with named arguments, from a line containing multiple semi-colon delimited commands, and with variables in the arguments including string variables containing spaces. The tests below compare myls and the builtin ls: [NOTE: output elided and/or compacted to save space] PS> md C:\p\d\x, C:\p\d\y, C:\p\d\"jay z" PS> cd C:\p\d PS> ls # no args PS> myls # pass PS> cd .. PS> ls d # one arg PS> myls d # pass PS> $a="A"; $z="Z"; $y="y"; $jz="jay z" PS> $a; ls d; $z # multiple statements PS> $a; myls d; $z # pass PS> $a; ls d -Exclude x; $z # named args PS> $a; myls d -Exclude x; $z # pass PS> $a; ls d -Exclude $y; $z # variables in arg-line PS> $a; myls d -Exclude $y; $z # pass PS> $a; ls d -Exclude $jz; $z # variables containing spaces in arg-line PS> $a; myls d -Exclude $jz; $z # FAIL! Is there a way I can re-write myls to get the behavior I want?

  Read the article

• UIViewController not oreintating. Methods not called

  - by capple

  Greetings, This question does seem to be an ongoing saga in the world of iphone SDK... so heres my contribution... Had two separate projects from the same template... one semi-works, the other not at all... Please let me explain my steps... used this basic GL ES template //iphonedevelopment.blogspot.com/2008/12/opengl-project-template-for-xcode.html had to sort out some of the 'Release' configuration but otherwises has eveything I need to add orientation to a GL ES project. One my first project, did my stuff, then added these methods.... -(BOOL)shouldAutoRotateToInterfaceOrientation ..... -(void)willRotateToInterfaceOrientation .... -(void)didRotateFromInterfaceOrientation .... -(void)willAnimateRotationToInterfaceOrientation .... And understand what they do (or are trying to do in my case), the (BOOL)should... gets called once when the view controller is created, and returns 'YES'. But after that none of the other methods are called! So I started from scratch with a blank template (GL ES one from above)...and added minimum to support auto rotation. But this time none of the methods get called! So I investigated .... //developer.apple.com/iphone/library/qa/qa2010/qa1688.html as it said, I added the GLViewController.view first, then added the GLview as subviews of the application delegate. Nothing! Then found this //www.iphonedevsdk.com/forum/iphone-sdk-development/44993-how-determine-ipad-launch-orientation.html which states to enable orientation notifications [[UIDevice currentDevice] beginGeneratingDeviceOrientationNotifications]; and then subsequently disable them in the view controller... makes sense...did it, nothing... I think the notifications might be on by default though, since I didn't need to enable them in the first project, yet it still try to verify a orientation (i.e (BOOL)shouldAutoRotate... )... If any one could help me out it would be greatly appreciated as this issue is driving me insane. Thanks in advance. The code can be found here ... http://rapidshare.com/files/392053688/autoRotation.zip N.B These projects avoid nib/xib resources, would like to keep it that way if possible. P.S iPad device not out where I am so I cannot test on a device yet. Would be nice for it to work on the simulator.

  Read the article

• Fuzzy Regex, Text Processing, Lexical Analysis?

  - by justinzane

  I'm not quite sure what terminology to search for, so my title is funky... Here is the workflow I've got: Semi-structured documents are scanned to file. The files are OCR'd to text. The text is parsed into Python objects The objects are serialized (to SQL, JSON, whatever) for use. The documents are structures like this: HEADER blah blah, Page ### blah Garbage text... 1. Question Text... continued until now. A. Choice text... adsadsf. B. Another Choice... 2. Another Question... I need to extract the questions and choices. The problem is that, because the text is OCR output, there are occasional strange substitutions like '2' - 'Z' which makes ordinary regular expressions useless. I've tried the Levenshtein module and it helps, but it requires prior knowledge of what edit distance is to be expected. I don't know whether I'm looking to create a parser? a lexer? something else? This has lead me down all kinds of interesting but nonrelevant paths. Guidance would be greatly appreciated. Oh, also, the text is generally from specific technical domains, so general spelling tools are not so helpful. Regarding the structure of the documents, there is no clear visual pattern -- like line breaks or indentation -- with the exception of the fact that "questions" usually begin a line. Crap on the document can cause characters to appear before the actual beginning of the line, which means that something along the lines of r'^[0-9]+' does not reliably work. Though the "questions" always begin with an int, a period and a space; the OCR can substitute other characters or skip characters. This is not so much a problem with Tesseract or Cunieform, rather with the poor quality of the paper documents. # Note: for the project in question, it was decided that having a human prep the OCR'd text was better that spending the time coding a solution. I'd still love good pointers, however.

  Read the article

• Is this way of storing typed objects in memory good?

  - by Pindatjuh

  This is an "is this okay, or can it be done better" question. Topic: Storing typed objects in memory. Background information: I'm building a compiler for the x86-32 platform for my language. My goal includes typed objects. Idea: Every primitive is a semi-class (it can be used as if it was a normal class, but it's stored more compact). Every class is represented by primitives and some meta-data (containing class-properties, inheritance stuff, etc.). The meta-data is complex: it doesn't use fields but instead context-switches. For primitives, the meta-data is very small, compared to a "real" class, which is alot bigger. This enables another idea that "primitives are objects", in my language, which I found nessecairy. Example: If I have an array of 32 booleans, then the pure content of this array is exactly 4 byte (32 bits of booleans). The meta-data will contain flags that the type is an array of booleans, which contains 32 entries. The meta-data is very compacted, on bit-level: using a sort of "packing" mechanism, which is read by a FSM at runtime, when doing inspection of the type (like when passing the object to methods for checking, etc.) For instance (read from left to right, top to bottom, remember vertical possition when going to the right, and check nearest column header for meaning of switch): Primitive? Array? Type-Meta 1 Byte? || Size (1 byte) 1 1 [...] 1 [...] done 0 2 Bytes? || Size (2 bytes) 1 [...] done || Size (4 bytes) 0 [...] done Integer? 1 Byte? 2 Bytes? 0 1 0 1 done 1 done 0 done Boolean? Byte? 0 1 0 done 1 done More-Primitives 0 .... Class-Stuff (Huge) 0 ... (After reaching done the data is inserted. || = byte alignement. [...] is variable sized. ... is not described here, for simplicity. And let's call them cost-based-data-structures.) For an array of 32 booleans containing all true values, the memory for this type would be (read top-down): 1 Primitive 1 Array 1 ArrayType: Primitive 0 Not-Array 0 Not-Integer 1 Boolean 0 Not-Byte (thus bit) 1 Integer Size: 1 Byte 00100000 Array size 11111111 11111111 11111111 11111111 Data Thus, 8 bytes represent 32 booleans in an array: 11100101 00100000 11111111 11111111 11111111 11111111 Is this okay, or can it be done better?

  Read the article

• Embedded Javascript in Master Page or Pages That Use Master Page throw "Object Expected Error"

  - by Philter

  I'm semi-new to writing ASP.Net applications using master pages and I've run into an issue I've spent some time on but can't seem to solve. My situation is that I have a master page with a structure that looks like this: <head runat="server"> <title>Test Site</title> <link rel="Stylesheet" type="text/css" href="Default.css" /> <script type="text/javascript" language="javascript" src="js/Default.js" /> <meta http-equiv="Expires" content="0"/> <meta http-equiv="Cache-Control" content="no-cache"/> <meta http-equiv="Pragma" content="no-cache"/> <asp:ContentPlaceHolder ID="cphHead" runat="server"> </asp:ContentPlaceHolder> </head> <body> <form id="form1" runat="server"> <div id="divHeader"> <asp:ContentPlaceHolder ID="cphPageTitle" runat="server"></asp:ContentPlaceHolder> </div> <div id="divMainContent"> <asp:ContentPlaceHolder ID="cphMainContent" runat="server"></asp:ContentPlaceHolder> </div> </div> </form> </body> I then have a page that uses this master page that contains the following: <asp:Content ContentPlaceHolderID="cphHead" runat="server"> <script type="text/javascript" language="javascript" > function test() { alert("Hello World"); } </script> </asp:Content> <asp:Content ContentPlaceHolderID="cphMainContent" runat="server"> <fieldset> <img alt="Select As Of Date" src="Images/Calendar.png" id="aAsOfDate" class="clickable" runat="server" onclick="test();" /> <asp:Button runat="server" CssClass="buttonStyle" ID="btnSubmit" Text="Submit" OnClick="btnSubmit_Clicked"/> </fieldset> </asp:Content> When I run this page and click on the image I get an "Object Expected" error. However, if I place the test function into my Default.js external file it will function perfectly. I can't seem to figure out why this is happening. Any ideas?

  Read the article

• Maven mercurial extension constantly fails

  - by TheLQ

  After 2+ hours I was able to get the maven-scm-provider-hg extension (for pushing to mercurial repos from Maven) semi working, meaning that it was executing commands instead of just giving errors. However I think I've run into a wall with this error [INFO] [deploy:deploy {execution: default-deploy}] [INFO] Retrieving previous build number from pircbotx.googlecode.com [INFO] Removing C:\DOCUME~1\Owner\LOCALS~1\Temp\wagon-scm1210107000.checkout\pir cbotx\pircbotx\1.3-SNAPSHOT [INFO] EXECUTING: cmd.exe /X /C "hg clone -r tip https://*SNIP*@site.pircbotx.googlecode.com/hg/maven2/snapshots/pircbotx/pircbotx/1.3-SNAPSHOT C:\DOCUME~1\Owner\LOCALS~1\Temp\wagon-scm1210107000.checkout\pircbotx\pircbotx\1.3-SNAPSHOT" [INFO] EXECUTING: cmd.exe /X /C "hg locate" [INFO] repository metadata for: 'snapshot pircbotx:pircbotx:1.3-SNAPSHOT' could not be found on repository: pircbotx.googlecode.com, so will be created Uploading: scm:hg:https://site.pircbotx.googlecode.com/hg/maven2/snapshots/pircbotx/pircbotx/1.3-SNAPSHOT/pircbotx-1.3-SNAPSHOT.jar [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Error deploying artifact: Error listing repository: No such command 'list'. What on earth would cause that error? I'm on a Windows box, so any commands that aren't commands give "'list' is not recognized as an internal or external command...", not "No such command 'list'." POM <build> <extensions> <extension> <groupId>org.apache.maven.scm</groupId> <artifactId>maven-scm-provider-hg</artifactId> <version>1.4</version> </extension> <extension> <groupId>org.apache.maven.wagon</groupId> <artifactId>wagon-scm</artifactId> <version>1.0-beta-7</version> </extension> </extensions> ... <distributionManagement> <snapshotRepository> <id>pircbotx.googlecode.com</id> <name>PircBotX Site</name> <url>scm:hg:https://site.pircbotx.googlecode.com/hg/maven2/snapshots</url> <uniqueVersion>false</uniqueVersion> </snapshotRepository> </distributionManagement> Mercurial version W:\programming\pircbot-hg>hg version Mercurial Distributed SCM (version 1.7.2) Any suggestions?

  Read the article

• Any simple approaches for managing customer data change requests for global reference files?

  - by Kelly Duke

  For the first time, I am developing in an environment in which there is a central repository for a number of different industry standard reference data tables and many different customers who need to select records from these industry standard reference data tables to fill in foreign key information for their customer specific records. Because these industry standard reference files are utilized by all customers, I want to reserve Create/Update/Delete access to these records for global product administrators. However, I would like to implement a (semi-)automated interface by which specific customers could request record additions, deletions or modifications to any of the industry standard reference files that are shared among all customers. I know I need something like a "data change request" table specifying: user id, user request datetime, request type (insert, modify, delete), a user entered text explanation of the change request, the user request's current status (pending, declined, completed), admin resolution datetime, admin id, an admin entered text description of the resolution, etc. What I can't figure out is how to elegantly handle the fact that these data change requests could apply to dozens of different tables with differing table column definitions. I would like to give the customer users making these data change requests a convenient way to enter their proposed record additions/modifications directly into CRUD screens that look very much like the reference table CRUD screens they don't have write/delete permissions for (with an additional text explanation and perhaps request priority field). I would also like to give the global admins a tool that allows them to view all the outstanding data change requests for the users they oversee sorted by date requested or user/date requested. Upon selecting a data change request record off the list, the admin would be directed to another CRUD screen that would be populated with the fields the customer users requested for the new/modified industry standard reference table record along with customer's text explanation, the request status and the text resolution explanation field. At this point the admin could accept/edit/reject the requested change and if accepted the affected industry standard reference file would be automatically updated with the appropriate fields and the data change request record's status, text resolution explanation and resolution datetime would all also be appropriately updated. However, I want to keep the actual production reference tables as simple as possible and free from these extraneous and typically null customer change request fields. I'd also like the data change request file to aggregate all data change requests across all the reference tables yet somehow "point to" the specific reference table and primary key in question for modification & deletion requests or the specific reference table and associated customer user entered field values in question for record creation requests. Does anybody have any ideas of how to design something like this effectively? Is there a cleaner, simpler way I am missing? Thank you so much for reading.

  Read the article

• Find location using only distance and range?

  - by pinnacler

  Triangulation works by checking your angle to three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and it's to my right at 90 degrees." Repeat 2 more times for different targets and angles. Trilateration works by checking your distance from three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and I'm 100 meters away from that." Repeat 2 more times for different targets and ranges. But both of those methods rely on knowing WHAT you're looking at. Say you're in a forest and you can't differentiate between trees, but you know where key trees are. These trees have been hand picked as "landmarks." You have a robot moving through that forest slowly. Do you know of any ways to determine location based solely off of angle and range, exploiting geometry between landmarks? Note, you will see other trees as well, so you won't know which trees are key trees. Ignore the fact that a target may be occluded. Our pre-algorithm takes care of that. 1) If this exists, what's it called? I can't find anything. 2) What do you think the odds are of having two identical location 'hits?' I imagine it's fairly rare. 3) If there are two identical location 'hits,' how can I determine my exact location after I move the robot next. (I assume the chances of having 2 occurrences of EXACT angles in a row, after I reposition the robot, would be statistically impossible, barring a forest growing in rows like corn). Would I just calculate the position again and hope for the best? Or would I somehow incorporate my previous position estimate into my next guess? If this exists, I'd like to read about it, and if not, develop it as a side project. I just don't have time to reinvent the wheel right now, nor have the time to implement this from scratch. So if it doesn't exist, I'll have to figure out another way to localize the robot since that's not the aim of this research, if it does, lets hope it's semi-easy.

  Read the article

• OpenGL Polygon Stipple Not Working On Different Machine

  - by FranticPedantic

  I have a situation where I am trying to draw a semi-transparent rectangle over a background that is not using openGL and so I can not use blending. I decided to use polygon stippling for a 'screen door transparency' effect as recommended by some. It works fine on my machine and some others, but on some machines with slightly old Intel graphics cards it's failing to render the rectangle at all. If I turn off polygon stipple, it renders fine (but without the stipple). I have compared many of the state variables that I thought might affect it (see code) between machines and they are all the same, and I get no errors. static const GLubyte stipplePatternChkr[128]; //definition omitted for clarity //but works on my machine // stipple the box glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); glColor4ubv(Color(COLORREF_PADGRAY)); glEnable(GL_POLYGON_STIPPLE); glPolygonStipple(stipplePatternChkr); CRect rcStipple(dim); rcStipple.DeflateRect(padding - 1, padding - 1); glBegin(GL_QUADS); glVertex2i(rcStipple.left, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.bottom); glVertex2i(rcStipple.right, rcStipple.top); glVertex2i(rcStipple.left, rcStipple.top); glEnd(); glDisable(GL_POLYGON_STIPPLE); int err = glGetError(); if (err != GL_NO_ERROR) { TRACE("glError(%s: %s)\n", s, gluErrorString(err)); } float x; glGetFloatv(GL_UNPACK_ALIGNMENT, &x); TRACE("unpack alignment %f\n", x); glGetFloatv(GL_UNPACK_IMAGE_HEIGHT, &x); TRACE("unpack height %f\n", x); glGetFloatv(GL_UNPACK_LSB_FIRST, &x); TRACE("unpack lsb %f\n", x); glGetFloatv(GL_UNPACK_ROW_LENGTH, &x); TRACE("unpack length %f\n", x); glGetFloatv(GL_UNPACK_SKIP_PIXELS, &x); TRACE("upnack skip %f\n", x); glGetFloatv(GL_UNPACK_SWAP_BYTES, &x); TRACE("upnack swap %f\n", x);

  Read the article

• Find location using only distance and bearing?

  - by pinnacler

  Triangulation works by checking your angle to three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and it's to my right at 90 degrees." Repeat 2 more times for different targets and angles. Trilateration works by checking your distance from three KNOWN targets. "I know the that's the Lighthouse of Alexandria, it's located here (X,Y) on a map, and I'm 100 meters away from that." Repeat 2 more times for different targets and ranges. But both of those methods rely on knowing WHAT you're looking at. Say you're in a forest and you can't differentiate between trees, but you know where key trees are. These trees have been hand picked as "landmarks." You have a robot moving through that forest slowly. Do you know of any ways to determine location based solely off of angle and range, exploiting geometry between landmarks? Note, you will see other trees as well, so you won't know which trees are key trees. Ignore the fact that a target may be occluded. Our pre-algorithm takes care of that. 1) If this exists, what's it called? I can't find anything. 2) What do you think the odds are of having two identical location 'hits?' I imagine it's fairly rare. 3) If there are two identical location 'hits,' how can I determine my exact location after I move the robot next. (I assume the chances of having 2 occurrences of EXACT angles in a row, after I reposition the robot, would be statistically impossible, barring a forest growing in rows like corn). Would I just calculate the position again and hope for the best? Or would I somehow incorporate my previous position estimate into my next guess? If this exists, I'd like to read about it, and if not, develop it as a side project. I just don't have time to reinvent the wheel right now, nor have the time to implement this from scratch. So if it doesn't exist, I'll have to figure out another way to localize the robot since that's not the aim of this research, if it does, lets hope it's semi-easy.

  Read the article

• JavaScript Resource Management Design Pattern

  - by Adam

  As a web developer, a common problem I find myself tackling is waiting for something to load before doing something else. In particular, I often hide (using either display: none; or visibility: hidden; depending on the situation) elements while waiting for a background image or a CSS file to load. Consider this example from Last.FM. They overlay a semi-transparant PNG over each album art image so that it looks like it's inside a jewel-case. They let it load when it loads, so depending on your internet speed, you may see the art image by itself (without the overlay) temporarily. In this case, the album art looks fine without the jewel-case effect. But in similar situations, I have found that I don't want the user to see the site's design mangled as resources incrementally load. So, in rare cases I have hidden everything from the user until the whole kit and kaboodle has loaded. But this is often a pain to write out, and may force the user to wait for a pretty long time to see anything (besides "loading..." text). I can think of (and have used on occasion) some obvious solutions/compromises: Use some inline CSS so that as certain parts of the DOM load and render, they will immediately have the correct size/position/etc. Immediately render the navigation part of the site, so that if the user wanted to use the current page purely to get somewhere else, they don't have to wait for the rest to load. Load pixelated images first as placeholders for layout while lazy-loading higher quality images as replacements. Something quirky like using a cute animated gif to distract the user during a "loading..." phase. Show useful information as a reference while loading the full UI. (Something akin to Gmail Inbox Preview, etc.) (Sorry if my question was basically just asked and answered...) Despite all of these ideas, I still find myself hoping there are better ways of doing some of these things. So I guess what I'm looking for is some inspiration and/or any creative ways of dealing with this problem that you guys may have seen out in the wild.

  Read the article

• CSS RGBA border / background alpha double

  - by stockli

  I'm working on a website that has a lot of transparency involved, and I thought I would try to build it entirely in RGBA and then do fallbacks for IE. I need a "facebox" style border effect, where the outer border is rounded and is less opaque than the background of the box it surrounds. The last example from http://24ways.org/2009/working-with-rgba-colour seems to suggest that it's possible, but I can't seem to get it to work. When I try the following: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"/> <title>RGBA Test</title> <style type='text/css'> body { background: #000; color: #fff; } #container { width: 700px; margin: 0 auto; background: rgba(255, 255, 255, 0.2); border: 10px solid rgba(255, 255, 255, 0.1); padding: 20px; } </style> </head> <body> <div id='container'> This should look like a facebox. </div> </body></html> It seems like the background "extends" underneath the border of the element, which causes the pixel values to get added together. Thus, when both the background and the border are semi-transparent, the border will ALWAYS be more opaque than the background of the element. This is exactly the opposite of what I am trying to achieve, but it seems like it should be possible based on the examples I've seen. I should also add that I can't use another element inside the container, because I'm also going to use a border-radius on the container to get rounded corners, and webkit squares the corners of the child elements if they have a background assigned, which would essentially mean a rounded outer border with square contents. Sorry I can't post an image of this... Apparently I don't have enough rep to post an image.

  Read the article

• Information Gain and Entropy

  - by dhorn

  I recently read this question regarding information gain and entropy. I think I have a semi-decent grasp on the main idea, but I'm curious as what to do with situations such as follows: If we have a bag of 7 coins, 1 of which is heavier than the others, and 1 of which is lighter than the others, and we know the heavier coin + the lighter coin is the same as 2 normal coins, what is the information gain associated with picking two random coins and weighing them against each other? Our goal here is to identify the two odd coins. I've been thinking this problem over for a while, and can't frame it correctly in a decision tree, or any other way for that matter. Any help? EDIT: I understand the formula for entropy and the formula for information gain. What I don't understand is how to frame this problem in a decision tree format. EDIT 2: Here is where I'm at so far: Assuming we pick two coins and they both end up weighing the same, we can assume our new chances of picking H+L come out to 1/5 * 1/4 = 1/20 , easy enough. Assuming we pick two coins and the left side is heavier. There are three different cases where this can occur: HM: Which gives us 1/2 chance of picking H and a 1/4 chance of picking L: 1/8 HL: 1/2 chance of picking high, 1/1 chance of picking low: 1/1 ML: 1/2 chance of picking low, 1/4 chance of picking high: 1/8 However, the odds of us picking HM are 1/7 * 5/6 which is 5/42 The odds of us picking HL are 1/7 * 1/6 which is 1/42 And the odds of us picking ML are 1/7 * 5/6 which is 5/42 If we weight the overall probabilities with these odds, we are given: (1/8) * (5/42) + (1/1) * (1/42) + (1/8) * (5/42) = 3/56. The same holds true for option B. option A = 3/56 option B = 3/56 option C = 1/20 However, option C should be weighted heavier because there is a 5/7 * 4/6 chance to pick two mediums. So I'm assuming from here I weight THOSE odds. I am pretty sure I've messed up somewhere along the way, but I think I'm on the right path! EDIT 3: More stuff. Assuming the scale is unbalanced, the odds are (10/11) that only one of the coins is the H or L coin, and (1/11) that both coins are H/L Therefore we can conclude: (10 / 11) * (1/2 * 1/5) and (1 / 11) * (1/2) EDIT 4: Going to go ahead and say that it is a total 4/42 increase.

  Read the article

• Can't access font resource in Silverlight class library

  - by Matt

  I have a reasonably large Silveright 3.0 project on the go, and I'm having issues accessing a couple of custom font resources from within one of the assemblies. I've got a working test solution where I have added a custom font as a resource, and can access it fine from XAML using: <TextBlock Text="Test" FontFamily="FontName.ttf#Font Name" /> The test solution consists of the TestProject.Application and the TestProject.Application.Web projects, with all the fun and games obviously in the TestProject.Application project However, when I try this in my main solution, the fonts refuse to show in the correct type face (instead showing in the default font). There's no difference in the way the font has been added to project between the test solution and the main solution, and the XAML is identical. However, there is a solution layout difference. In the main solution, as well as having a MainApp.Application and MainApp.Application.Web project, I also have a MainApp.Application.ViewModel project and a MainApp.Application.Views project, and the problem piece of XAML is the in the MainApp.Application.Views project (not the .Application project like the test solution). I've tried putting the font into either the .Application or .Application.Views project, tried changing the Build Action to Content, Embedded Resource etc, all to no avail. So, is there an issue accessing font resources from a child assembly that I don't know about, or has anyone successfully done this? My long term need will be to have the valid custom fonts being stored as resources in a separate .Application.FontLibrary assembly that will be on-demand downloaded and cached, and the XAML controls in the .Application.Views project will need to reference this FontLibrary assembly to get the valid fonts. I've also tried xcreating this separate font library assembly, and I can't seem to get the fonts from the second assembly. As some additional information, I've also tried the following font referencing approaches: <TextBlock Text="Test" FontFamily="/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;/FontName.ttf#Font Name" /> <TextBlock Text="Test" FontFamily="pack:application,,,/MainApp.Application.Views;component/FontName.ttf#Font Name" /> And a few similar variants with different assembly references/sub directories/random semi colons. And so far nothing works... anyone struck this (and preferably solved it)?

  Read the article

• Rails has-and-belongs-to-many form question

  - by swilliams

  Sorry for the semi-generic title, but I'm still pretty new at rails and couldn't think of a succinct way to put the question. I have a basic habtm model setup: a Project has many Resources and a Resource can have many Projects. I have the database and models setup properly, and can do everything I need to via the console, but I'm having trouble translating it all into the view. On the show view for the Project, I want to be able to create a Resource and automatically assign it to the current Project. Here's my basic html: <p> <b>Name:</b> <%=h @project.name %> </p> <h2>Equipment</h2> <ul> <% @project.resources.each do |r| %> <li><%=h r.name %></li> <% end %> </ul> <h2>Add A Resource</h2> <% form_for(@project) do |f| %> <%= f.error_messages %> <p> Resource Name:<br /> <%= f.text_field :resources %> </p> <p> <%= f.submit 'Create' %> </p> <% end %> Obviously, that form won't work, but I'm at a loss for what to do next. I've searched around for various examples, but haven't found one for what I'm trying to do here. One thing I've thought of was to change the form to be form_for(Resource.new) and include a hidden input of the @project.id. And then when the resource_controller handles the form, check for that id and go from there. That seems like an ugly kludge though.

  Read the article

• Can this way of storing typed objects be improved?

  - by Pindatjuh

  This is an "can it be improved"-question. Topic: Storing typed objects in memory. Background information: I'm building a compiler for the x86-32 Windows platform for my language. My goal includes typed objects. Idea: Every primitive is a semi-class (it can be used as if it was a normal class, but it's stored more compact). Every class is represented by primitives and some meta-data (containing class-properties, inheritance stuff, etc.). The meta-data is complex: it doesn't use fields but instead context-switches. For primitives, the meta-data is very small, compared to a "real" class, which is alot bigger. This enables another idea that "primitives are objects", in my language, which I found nessecairy. Example: If I have an array of 32 booleans, then the pure content of this array is exactly 4 byte (32 bits of booleans). The meta-data will contain flags that the type is an array of booleans, which contains 32 entries. The meta-data is very compacted, on bit-level: using a sort of "packing" mechanism, which is read by a FSM at runtime, when doing inspection of the type (like when passing the object to methods for checking, etc.) For instance (read from left to right, top to bottom, remember vertical position when going to the right, and check nearest column header for meaning of switch): Primitive? Array? Type-Meta 1 Byte? || Size (1 byte) 1 1 [...] 1 [...] done 0 2 Bytes? || Size (2 bytes) 1 [...] done || Size (4 bytes) 0 [...] done Integer? 1 Byte? 2 Bytes? 0 1 0 1 done 1 done 0 done Boolean? Byte? 0 1 0 done 1 done More-Primitives 0 .... Class-Stuff (Huge) 0 ... (After reaching done the data is inserted. || = byte alignment. [...] is variable sized. ... is not described here, for simplicity. And let's call them cost-based-data-structures.) For an array of 32 booleans containing all true values, the memory for this type would be (read top-down): 1 Primitive 1 Array 1 ArrayType: Primitive 0 Not-Array 0 Not-Integer 1 Boolean 0 Not-Byte (thus bit) 1 Integer Size: 1 Byte 00100000 Array size 01010101 01010101 01010101 01010101 Data (user defined) Thus, 8 bytes represent 32 booleans in an array: 11100101 00100000 01010101 01010101 01010101 01010101 How can I improve this? (Both performance- and memory-consumption wise)

  Read the article

• What makes a Winform position initially stale?

  - by msorens

  The code below demonstrates a very simple problem; I am hoping that I am just missing a setting that someone might be able to reveal. Goal (1) Launch main winform (MainForm). (2) Press button to display secondary winform (ShadowForm) that is semi-transparent and should exactly overlay MainForm. What Actually Happens Scenario 1: Launch main winform then press button: ShadowForm displays with correct size but incorrect location, lower and to the right (as if it was cascaded). Press button to close ShadowForm again. Press button once more to reopen ShadowForm and now it is in the correct position, covering MainForm. Scenario 2: Launch main winform, move it around, then press button: ShadowForm displays with correct size but incorrect location (where the MainForm was before moving it). Press button to close; press again to reopen and now ShadowForm is in the correct position. using System; using System.Windows.Forms; namespace LocationTest { static class Program { static void Main() { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); Application.Run(new MainForm()); } } public class MainForm : Form { ShadowForm shadowForm = new ShadowForm(); Button button1 = new Button(); System.ComponentModel.IContainer components = null; public MainForm() { this.SuspendLayout(); this.button1.Location = new System.Drawing.Point(102, 44); this.button1.Size = new System.Drawing.Size(75, 23); this.button1.Text = "button1"; this.button1.Click += new System.EventHandler(this.button1_Click); this.ClientSize = new System.Drawing.Size(292, 266); this.Controls.Add(this.button1); this.ResumeLayout(false); } private void button1_Click(object sender, EventArgs e) { if (shadowForm.Visible) { shadowForm.Hide(); } else { shadowForm.Size = Size; // this always works shadowForm.Location = Location; // this fails first time, but works second time! shadowForm.Show(); } } protected override void Dispose(bool disposing) { if (disposing && (components != null)) { components.Dispose(); } base.Dispose(disposing); } } public class ShadowForm : Form { private System.ComponentModel.IContainer components = null; public ShadowForm() { this.SuspendLayout(); this.BackColor = System.Drawing.Color.Black; this.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None; this.Opacity = 0.5; this.Click += new System.EventHandler(this.ShadowForm_Click); this.ResumeLayout(false); } private void ShadowForm_Click(object sender, EventArgs e) { Hide(); } protected override void Dispose(bool disposing) { if (disposing && (components != null)) { components.Dispose(); } base.Dispose(disposing); } } }

  Read the article

• iPhone: Create a single UIView from multiple clicks

  - by Cuzog

  I'm making a partial overlay modal in my app with the code from “Semi-Modal (Transparent) Dialogs on the iPhone” at ramin.firoozye.com. In doing so, the button that calls the modal is still visible and clickable. I will hide this button when the modal spawns, but I want to be sure if the user clicks very quickly twice, a new modal doesn't come up for each click. What is the best way to check that the modal doesn't already exist when calling it from the button click? You can download the test project here. For those that don't have xcode, the relevant functions are below: I call forth the modal on button click with this: - (IBAction)displayModal:(id)sender { ModalViewController *modalController = [[ModalViewController alloc] initWithNibName:@"ModalViewController" bundle:nil]; modalController.view.frame = CGRectOffset(modalController.view.frame, 0, 230); [self showModal:modalController.view]; } Then use this function to animate the custom modal over the current view: - (void)showModal:(UIView*) modalView { UIWindow* mainWindow = (((TestAppDelegate*) [UIApplication sharedApplication].delegate).window); CGPoint middleCenter = modalView.center; CGSize offSize = [UIScreen mainScreen].bounds.size; CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, offSize.height * 1.5); modalView.center = offScreenCenter; // we start off-screen [mainWindow addSubview:modalView]; // Show it with a transition effect [UIView beginAnimations:nil context:nil]; [UIView setAnimationDuration:0.4]; // animation duration in seconds modalView.center = middleCenter; [UIView commitAnimations]; } Then I dismiss the modal on button click with this: - (IBAction)dismissModal:(id)sender { [self hideModal:self.view]; } And then use these functions to animate the modal offscreen and clean itself up: - (void)hideModal:(UIView*) modalView { CGSize offSize = [UIScreen mainScreen].bounds.size; CGPoint offScreenCenter = CGPointMake(offSize.width / 2.0, offSize.height * 1.5); [UIView beginAnimations:nil context:modalView]; [UIView setAnimationDuration:0.7]; [UIView setAnimationDelegate:self]; [UIView setAnimationDidStopSelector:@selector(hideModalEnded:finished:context:)]; modalView.center = offScreenCenter; [UIView commitAnimations]; } - (void)hideModalEnded:(NSString *)animationID finished:(NSNumber *)finished context:(void *)context { UIView* modalView = (UIView *)context; [modalView removeFromSuperview]; [self release]; } Any help is greatly appreciated!

  Read the article

• Robust way to save/load objects with dependencies?

  - by mrteacup

  I'm writing an Android game in Java and I need a robust way to save and load application state quickly. The question seems to apply to most OO languages. To understand what I need to save: I'm using a Strategy pattern to control my game entities. The idea is I have a very general Entity class which e.g. stores the location of a bullet/player/enemy and I then attach a Behaviour class that tells the entity how to act: class Entiy { float x; float y; Behavior b; } abstract class Behavior { void update(Entity e); {} // Move about at a constant speed class MoveBehavior extends Behavior { float speed; void update ... } // Chase after another entity class ChaseBehavior extends Behavior { Entity target; void update ... } // Perform two behaviours in sequence class CombineBehavior extends Behavior { Behaviour a, b; void update ... } Essentially, Entity objects are easy to save but Behaviour objects can have a semi-complex graph of dependencies between other Entity objects and other Behaviour objects. I also have cases where a Behaviour object is shared between entities. I'm willing to change my design to make saving/loading state easier, but the above design works really well for structuring the game. Anyway, the options I've considered are: Use Java serialization. This is meant to be really slow in Android (I'll profile it sometime). I'm worried about robustness when changes are made between versions however. Use something like JSON or XML. I'm not sure how I would cope with storing the dependencies between objects however. Would I have to give each object a unique ID and then use these IDs on loading to link the right objects together? I thought I could e.g. change the ChaseBehaviour to store a ID to an entity, instead of a reference, that would be used to look up the Entity before performing the behaviour. I'd rather avoid having to write lots of loading/saving code myself as I find it really easy to make mistakes (e.g. forgetting to save something, reading things out in the wrong order). Can anyone give me any tips on good formats to save to or class designs that make saving state easier?

  Read the article

• How to count the length (number of lines) of a csv file in Rails?

  - by Mathias

  Hello, I have a form (Rails) which allows me to load a .csv file using the file_field. In the view: <% form_for(:upcsv, :html => {:multipart => true}) do |f| %> <table> <tr> <td><%= f.label("File:") %></td> <td><%= f.file_field(:filename) %></td> </tr> </table> <%= f.submit("Submit") %> <% end %> Clicking Submit redirects me to another page (create.html.erb). The file was loaded fine, and I was able to read the contents just fine in this second page. I am trying to show the number of lines in the .csv file in this second page. My controller (semi-pseudocode): class UpcsvController < ApplicationController def index end def create file = params[:upcsv][:filename] ... #params[:upcsv][:file_length] = file.length # Show number of lines in the file #params[:upcsv][:file_length] = file.size ... end end Both file.length and file.size returns '91' when my file only contains 7 lines. From the Rails documentation that I read, once the Submit button is clicked, Rails creates a temp file of the uploaded file, and the params[:upcsv][:filename] contains the contents of the temp/uploaded file and not the path to the file. And I don't know how to extract the number of lines in my original file. What is the correct way to get the number of lines in the file? My create.html.erb: <table> <tr> <td>File length:</td> <td><%= params[:upcsv][:file_length] %></td> </tr> </table> I'm really new at Rails (just started last week), so please bear with my stupid questions. Thank you!

  Read the article

• 'Scanner' does not name a type error in g++

  - by Max

  Hi. I'm trying to compile code in g++ and I get the following errors: In file included from scanner.hpp:8, from scanner.cpp:5: parser.hpp:14: error: ‘Scanner’ does not name a type parser.hpp:15: error: ‘Token’ does not name a type Here's my g++ command: g++ parser.cpp scanner.cpp -Wall Here's parser.hpp: #ifndef PARSER_HPP #define PARSER_HPP #include <string> #include <map> #include "scanner.hpp" using std::string; class Parser { // Member Variables private: Scanner lex; // Lexical analyzer Token look; // tracks the current lookahead token // Member Functions <some function declarations> }; #endif and here's scanner.hpp: #ifndef SCANNER_HPP #define SCANNER_HPP #include <iostream> #include <cctype> #include <string> #include <map> #include "parser.hpp" using std::string; using std::map; enum { // reserved words BOOL, ELSE, IF, TRUE, WHILE, DO, FALSE, INT, VOID, // punctuation and operators LPAREN, RPAREN, LBRACK, RBRACK, LBRACE, RBRACE, SEMI, COMMA, PLUS, MINUS, TIMES, DIV, MOD, AND, OR, NOT, IS, ADDR, EQ, NE, LT, GT, LE, GE, // symbolic constants NUM, ID, ENDFILE, ERROR }; class Token { public: int tag; int value; string lexeme; Token() {tag = 0;} Token(int t) {tag = t;} }; class Num : public Token { public: Num(int v) {tag = NUM; value = v;} }; class Word : public Token { public: Word() {tag = 0; lexeme = "default";} Word(int t, string l) {tag = t; lexeme = l;} }; class Scanner { private: int line; // which line the compiler is currently on int depth; // how deep in the parse tree the compiler is map<string,Word> words; // list of reserved words and used identifiers // Member Functions public: Scanner(); Token scan(); string printTag(int); friend class Parser; }; #endif anyone see the problem? I feel like I'm missing something incredibly obvious.

  Read the article

• How to diagnose computer lockup/freezing problem

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

  Read the article

• multi-user rvm gem install failure when called from CloudFormation::Init

  - by Peter Mounce

  I've taken an Amazon Linux AMI (based on CentOS) and installed RVM (1.10.3) to it in multi-user fashion (see {1} below). I used that to install ruby 1.9.3-p125, rubygems 1.8.17, and bundler 1.1 as the baseline requirements for most things I'm going to be using the instances for. I've captured that instance to an AMI, and am now launching it via CloudFormation, with some CloudFormation::Init commands. One of them is to use s3cmd to pull down a private gem from S3, and the next one, the one that fails, is to install that gem. It fails with an error message 2012-03-15 16:53:20,201 [ERROR] Command 20_install_gems (/usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem install ./*.gem) failed 2012-03-15 16:53:20,202 [DEBUG] Command 20_install_gems output: /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12:in `require': no such file to load -- rubygems (LoadError) from /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12 Now, that happens during the cfn-init execution - I assume, but haven't checked yet, that cfn-init is being run with an environment different from that of ec2-user (there are no other users on the instance). If I run gem install mygem.gem in an interactive session then that works fine. So, my question really, is what should I do to make this work for cfn-init? Have I correctly set up rvm as multi-user? I've confirmed that cfn-init is being run as the root user, with his restricted environment. How should I source the /etc/profile.d/rvm.sh into root's sessions? {1} My semi-automated rvm installation steps (run in interactive session as ec2-user): sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer ) sudo gpasswd -a ec2-user rvm # iconv-devel is baked into centos' glibc sudo yum install -y autoconf automake bison bzip2 gcc-c++ git libffi-devel libtool libxml2-devel libxslt-devel libyaml-devel make openssl-devel patch readline readline-devel zlib zlib-devel source /etc/profile.d/rvm.sh rvm list known # in a new session: rvm install ruby-1.9.3-p125 rvm use 1.9.3 --default gem update --system # gems required by public_web-awareness gem install aws-sdk bundler cocaine sinatra echo -e "gem: --no-ri --no-rdoc\n" > /home/ec2-user/.gemrc # delete unnecessary documentation files rm -rf `gem env gemdir`/doc sudo -s sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/skel/.gemrc sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/gemrc # ctrl + d out of the sudo session Some environment information: [ec2-user@ip ~]$ echo $PATH /usr/local/rvm/gems/ruby-1.9.3-p125/bin:/usr/local/rvm/gems/ruby-1.9.3-p125@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p125/bin:/usr/local/rvm/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/aws/bin:/home/ec2-user/bin [ec2-user@ip ~]$ echo $GEM_HOME /usr/local/rvm/gems/ruby-1.9.3-p125 [ec2-user@ip ~]$ echo $GEM_PATH /usr/local/rvm/gems/ruby-1.9.3-p125:/usr/local/rvm/gems/ruby-1.9.3-p125@global [ec2-user@ip ~]$ echo $BUNDLE_PATH [ec2-user@ip ~]$ gem list *** LOCAL GEMS *** aws-sdk (1.3.6) bundler (1.1.0) cocaine (0.2.1) httparty (0.8.1) json (1.6.5) multi_json (1.1.0) multi_xml (0.4.1) nokogiri (1.5.1, 1.5.0) rack (1.4.1) rack-protection (1.2.0) rake (0.9.2) sinatra (1.3.2) tilt (1.3.3) uuidtools (2.1.2) yamler (0.1.0)

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28  | Next Page >