Search Results

Search found 8224 results on 329 pages for 'sometimes'.

Page 24/329 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

  • 12.10 Booting Into Variations Of Blank Screen

    - by user93954
    I've been running the Ubuntu 12.10 beta since about a month before the final release with almost no problems. However since the day of release (I'm assuming an update has caused this) I have had problems booting into the actual GUI interface. Trying to get it to work is just a case of hard shutting down until it works, but for most of the time I need to battle with various different kinds of black screens. These include a plain black screen, a flashing line and a flashing line that doesn't fit the resolution. Nine times out of ten the cursor will be displayed over these. It also sometimes manages to boot into Ubuntu, albeit text mode or sometimes it loads GRUB which it isn't setup to do. If anyone could help out with this it'd be great. I really, really don't want to have to go through yet another clean installation. Cheers.

    Read the article

  • How to use TFS as a query tracking system?

    - by deostroll
    We already use tfs for managing defects in code etc, etc. We additionally need a way to "understand the domain & requirements of the products". Normally, without tfs we exchange emails with the consultants and have the questions/queries answered. If it is a feature implementation we sometimes "find" conflicts in the implementation itself. And when that happens the userstory is modified and the enhancement/bug as per that is raised in TFS. Sometimes it is critical we come back to decisions we made or questions we wanted answers to. Hence we need to be able to track how that "requirement idea" or that "query in concern" evolved. Hence how is it that we can use TFS to track all of this? Do we raise an "issue" item for this? Or do we raise a "bug" item? The main things we'd ideally look in a query tracking system are as follows: Area: Can be a module, submodule, domain. Sometimes this may be "General" - to address domain related stuff, or, event more granular to address modules, sub-modules. Take the case for the latter, if we were tracking this in excel sheets, we'd just write module1,submodule2; i.e. in a comma separated fashion. The things I would like here is to be able search for all queries relating to submodule2 sometime in the future. Responses: This is a record of conversations between the consultant and any other stakeholder. For a simple case, it would just be paragraphs. Each para would start with a name and date enclosed in brackets and the response following that...each para would be like a thread - much like a forum thread Action taken: We'd want to know how the query was closed, what was the input given, what were the changes that took place because of that, etc etc. These are fields I think I would need in such a system apart from some obvious ones like status, address to, resovled by, etc. I am open for any other fields which are sort of important. To summarise my question: how can we manage "queries" in the system? Where should we ideally store data pertaining to those three fields I have mentioned above (for e.g. is it wise to store responses in the history tag assuming we are opening a bug for the query)?

    Read the article

  • Ambiguous Comparison Hint

    - by Ondrej Brejla
    Hi everybody! Today we would like to show you some new hint which will be available in NetBeans 7.3. It's called Ambiguous Comparison hint. Its name seems to be quite fuzzy, but it describes exactly what the hint does. It tries to check all comparisons whether they are intended. Because sometimes you want to make a simple assignment, but you make a typo and comparison appears. It's really dangerous mistake because then your code doesn't work as expected. Your application can produce buggy results. So here is how it looks like: But sometimes a comparison is really intended. E.g. in return statements when you want to return a boolean, so then the hint works as expected and no warning appears. That's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (component php, subcomponent Editor). Thanks.

    Read the article

  • Mts mblaze doesn't connect to internet

    - by Chetan
    I've sony vaio vpceb24en laptop, I'm using dual boot system with windows 7 and ubuntu. Firstly I installed ubuntu 10.04 LTS then upgraded to 12.04 & 12.04.1 afterwards. I have mts mblaze dongle. I have set up the mts connection profile under the mobile broadband. My problem is : Sometimes my connection is easily made & I use it, sometime it never connects. So I have to restart my system then it connects to internet sometimes. But now it's not connecting even I restarted my system many times, just it shows trying to connect icon once, then never tries to connect. while in windows it's working fine. Please someone help me out how to resolve this problem as I'm very new to linux. Thanks, Chetan

    Read the article

  • What is the most effective way to add functionality to unfamiliar, structurally unsound code?

    - by Coder
    This is probably something everyone has to face during the development sooner or later. You have an existing code written by someone else, and you have to extend it to work under new requirements. Sometimes it's simple, but sometimes the modules have medium to high coupling and medium to low cohesion, so the moment you start touching anything, everything breaks. And you don't feel that it's fixed correctly when you get the new and old scenarios working again. One approach would be to write tests, but in reality, in all cases I've seen, that was pretty much impossible (reliance on GUI, missing specifications, threading, complex dependencies and hierarchies, deadlines, etc). So everything sort of falls back to good ol' cowboy coding approach. But I refuse to believe there is no other systematic way that would make everything easier. Does anyone know a better approach, or the name of the methodology that should be used in such cases?

    Read the article

  • How do I make Home and End work in PuTTY SSH with fish shell?

    - by endolith
    Years ago, an Ubuntu update broke this and I've never found a solution. I have fish as my default shell. Ubuntu 12.10 Locally (Gnome Terminal), Home and End keys work fine in both fish and bash. When I log in by SSH using PuTTY, then run bash, Home and End work fine inside of bash. However, when I log in by SSH using PuTTY, in the default fish shell, pressing Home key produces [1~ (sometimes erasing the line, sometimes not). When I press End, it produces [4~. How do I get Home and End to work correctly?

    Read the article

  • Printing takes forever and gives pixelated prints

    - by kelvinsong
    I have a Brother HL-3070CW printer, which has some serious issues. Printing takes an abnormally long time, and if the file has anything more than text in it, it becomes horribly aliased and pixelated. The printer also sometimes complains about running out of memory. This problem has appeared on and off throughout various Ubuntu releases, and can sometimes be worked around by saving a file in Postscript through Evince, and printing the PS file in Evince. I tried to install drivers from the Brother website, but it gives an error "dependency not satisfiable: hl3070cwlpr" Help, I'm wasting a huge amount of paper and ink(not to mention time) reprinting pages over and over again in trial and error.

    Read the article

  • Self Welcoming Post on geekswithblogs.net

    - by OscarRibbeck
    Hello!.As you may notice :), this is my first post on geekswithblogs.com . I  have been using the .Net Framework mainly to develop ASP.NET WebApps for some years now and I am moving from using the .Net Framework 2.0 to using the latest features on the 4.x Frameworks, I am planning to document whenever is possible some of the stuff I learn using this space kindly given by the staff of the site. The feedback I get will also be very important for my progress and my plan is to learn a lot from what you guys can teach me with your comments on here.I also found myself with the necessity of putting somewhere code samples because sometimes when you post on forums the entries get locked and you can't do anything to add relevant details on them. The code will either be explained on its entirety or will be posted on a link that has an explained working sample for you guys to test and learn from.My posts will be in English, and I am an intermediate English speaker/writer so bare with me if it's not perfect sometimes, I am always learning something new though.I hope this get to be a useful resource for anyone interested. Cheers and Happy Coding for everyone!,Oscar

    Read the article

  • better way to track defect sources in tfs

    - by deostroll
    What is the best way to track defect sources in tfs? We have various teams for a project like the vulnerability team, the customer, pre-sales, etc. We give a build and these teams independently test it. They do not have access to our tfs system. So they usually send in their defects via email. It will usually be send in an excel format. Our testing team takes these up and logs them into tfs. Sometimes they modify the original defect description (in excel) and add the expected/actual results. Sometimes they miss to cite the source. I am talking about managing the various sources as such. Is there a way we can add these sources into tfs, and actually link this particular source with the defects, with individual comments associated with them (saying where in the source we can find the actual material for the defect).

    Read the article

  • How can I force the (re)discovery of PulseAudio network sound devices?

    - by Christian
    I'm using the PulseAudio feature of network sound devices (not Multicast/RTP) to play sound from my netbook on the audio equipment connected to the HTPC when at home. This creates a virtual sound device that I can then use instead of the physical built-in one. Most of the time this works just fine. Sometimes however, the virtual sound device just doesn't appear. Disconnecting from and reconnecting to the network helps sometimes but not always and it's annoying and potentially bad for existing TCP connections. So my question basically is: Is there some way to tell PulseAudio "Hey, just look again if you really can't find a network sound device."? Edit: Unloading and reloading the module-zeroconf-discover with pacmd does not help either and it doesn't appear to be an avahi problem per se since avahi-browse -t --all | grep PulseAudio shows lots of right-looking stuff, even when the devices aren't listed in pavucontrol or pacmd list-sinks. Edit 2: I'm using Ubuntu 12.04 on both boxes for all the difference it might make.

    Read the article

  • Gmail address book in Evolution does not work

    - by wouter205
    I added my Gmail address book to evolution, but it gives my an error every time, even when choosing "use secure connection" in the address book options. The error is (I translated it on my own): unable to open address book. This is because you entered a wrong URI or the server is unavailable at the moment. Details: cannot open book: source already loaded! Sometimes, when I click the button 'reject error', it does load the address book but when I return to evolution after a while, it gives me the same error and sometimes I cannot load the address book. This is very annoying since I have to use evolution a lot.

    Read the article

  • Page Load Time - "Waiting on..." taking ages. What part of page request process is hung?

    - by James
    I have a new cluster site running on Magento that's on a development server that is made up of 2 x web servers and 1 x database server. I have optimized the site in all areas I know (gzip, increasing php memory limits, increasing database memory limits etc) but sometimes the page loading gets stuck on 'waiting for xxx.xx.xx.xxx' (Chrome and other broswers, chrome just shows it that way). It can sit there for 40 + seconds, sometimes it just never loads and I close it in frustration. What part of the page loading process is this hung at? Is it a server issue, database issue, platform issue? I need to know where to start or whether to push the hosting provider about it.

    Read the article

  • When do you use float and when do you use double

    - by Jakub Zaverka
    Frequently in my programming experience I need to make a decision whether I should use float or double for my real numbers. Sometimes I go for float, sometimes I go for double, but really this feels more subjective. If I would be confronted to defend my decision, I would probably not give sound reasons. When do you use float and when do you use double? Do you always use double, only when memory constraints are present you go for float? Or you use always float unless the precision requirement requires you to use double? Are there some substantial differences regarding computational complexity of basic arithemtics between float and double? What are the pros and cons of using float or double? And have you even used long double?

    Read the article

  • Game has noticeable frame drops but when through a profiler it always runs smooth

    - by felipedrl
    I'm trying to optimize my PC game but I can find the bottleneck since every time I run it through a profiler (gDEBugger) it runs smooths. When running outside gDEBugger I get these annoying hiccups. It's not just the graphics, the sound also gets choppy. The drops are inconsistent across runs, i.e, sometimes I run the same scenario and get no drops at all, sometimes I get a few drops, and others the game is consistently slow. The only constant is: when running through gDEBugger I ALWAYS get a smooth run. I'm suspecting something outside my game is interfering and causing these drops, but what in the hell does gDEBugger do that nullifies these drops? A higher process priority? Any ideas? Thanks in advance.

    Read the article

  • /etc/network/interfaces doesn't always take affect

    - by user1221444
    For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

    Read the article

  • Split screen and other issues on Ubuntu 11.10 with ATI graphics card

    - by garus
    Ever since updating my Ubuntu 11.04 to 11.10 I experience issues with graphics. The biggest is the "split screen" effect where my desktop is shifted to the right, resulting in having Unity bar in the middle of the screen. As shown here: http://i.imgur.com/I8nmZ.jpg This changes from boot to boot, sometimes it's on the left, sometimes in the middle. What I tried: Removing fglrx drivers completely Installing post-update version of them, but installation is broken ATM in the Ubuntu, so no go. No one is even trying to fix it (bug report https://bugs.launchpad.net/ubuntu/+source/nvidia-common/+bug/873058 and a couple of duplicates out there) Also using the open source "radeon" driver results in the same (I have a better successful boot ratio with this one, proprietary rarely lets me boot) Other artifacts are: serious screen tearing weird lines flickering in random places lagginess Did anyone experience that? My specs: Ubuntu 11.10 AMD Radeon HD 6950 1GB

    Read the article

  • Usefulness of the Backlinks shown in Webmaster Tools

    - by Ewan Heming
    Is the list of links for a site shown in Google Webmaster Tools a complete list or just a sample? I've noticed that the links in there appear to be all the ones I didn't think would have any real value - either because they were nofollow or from irrelivant sites. The few I did think would be some use have never shown up and there's also some links that are sometimes there and sometimes not (such as my linkedIn profile). Does this mean that the missing links don't/no longer carry any value? It almost appears that the list is there for Google to either inform you about problems (there was a useful list there when someone tried to SPAM my site) or mis-imform you about which link-building strategies work or not (to keep people guessing about what works or not).

    Read the article

  • How would you represent an object that can be of multiple types, when storing it as a document in MongoDB?

    - by blueberryfields
    Somewhat related to this question, say that I have an object category which, depending on which type of object I have, has different restrictions on what it contains. (if you can reword the previous sentence to make more sense I'd appreciate it) For example var SomeSchema = new Schema({ _id: ObjectID, [... large number of common fields ...] type: //Restricted somehow to members of a fixed array data: //depending on type, this might be restricted - sometimes an integer, sometimes array, etc... }); What's the idiosyncratic method for defining this type of schema? Is it appropriate to define a single schema, and handle the types inside of it's members, or am I better off with separate schema for each type?

    Read the article

  • Server 2012R2 – PowerShell Web Access

    - by Waclaw Chrabaszcz
    Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/05/17/server-2012r2--powershell-web-access.aspxHaha … Sometimes I'm joking that there is nothing worse than Linux fanboi imprisoned in Windows engineer's body. Maybe someday I will start blogging about my noob's experiences. However let's stick to the point. Sometimes the easiest solutions are the best. After couple of tries how to reach left pocket using right hand I'm going to follow easy path. Today's plan is very easy, I'm going to take advantage of Server 2012 and install Web gateway to PowerShell console. After that I would be able execute PoSH from any device including Linux. Install-WindowsFeature –Name WindowsPowerShellWebAccess –IncludeManagementToolsInstall-PswaWebApplication –UseTestCertificateAdd-PswaAuthorizationRule –UserName * -ComputerName * -ConfigurationName *  Let's test it …

    Read the article

  • Ubuntu desktop and dash problems

    - by user170163
    I am not sure if i have posted it to right place, so if no please don't judge me, I am a newbie. I installed Ubuntu 13.04 and I am happy with it. I have two OS's in dual boot. Ubuntu and Windows 7. in Ubuntu I have 2 problems. The first one is when I suspend my system I cannot resume it again. It sometimes show me the password screen (user names and etc. (sorry i don't know the exact name of it)) and sometimes just a blank screen. what can be the problem? The second one is this: When I hit ALT+F2 it looks like this ( but not always. when I restart the system everything is OK till about 30-40 minutes. and then it looks like this. Please help, I really like Ubuntu but these 2 problems ruin my plans about it. Thanks

    Read the article

  • What Counts for A DBA - Logic

    - by drsql
    "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

    Read the article

  • Locomotion-system with irregular IK

    - by htaunay
    Im having some trouble with locomtions (Unity3D asset) IK feet placement. I wouldn't call it "very bad", but it definitely isn't as smooth as the Locomotion System Examples. The strangest behavior (that is probably linked to the problem) are the rendered foot markers that "guess" where the characters next step will be. In the demo, they are smooth and stable. However, in my project, they keep flickering, as if Locomotion changed its "guess" every frame, and sometimes, the automatic defined step is too close to the previous step, or sometimes, too distant, creating a very irregular pattern. The configuration is (apparently)Identical to the human example in the demo, so I guessing the problem is my model and/or animation. Problem is, I can't figure out was it is =S Has anyone experienced the same problem? I uploaded a video of the bug to help interpreting the issue (excuse the HORRIBLE quality, I was in a hurry).

    Read the article

  • Wifi USB interface being detected after some time

    - by Dani
    I've got a wifi interface connected by USB (its chipset is the zd1211b, which I think it works with the zyd driver). When I log into my ubuntu 12.04 it don't detect the inteface but after waiting an indeterminate amount of time (sometimes a few minutes, sometimes half an hour or more) it is detected and it works fine. It's just to weird and also very annoying because you don't know when are you going to be able to use the wireless connection. Any solution to this? Can I force somehow the SO to detect the interface?

    Read the article

  • Gnome 3 - Old fashioned buttons and menus

    - by vigs1990
    I've upgraded to Gnome 3 and the problem I'm facing is that when I restart, sometimes the menus and buttons look old-fashioned like this: whereas sometimes, it looks modern and neat like this: Notice the differences between the two: here are a few differences: The menu bar (notice the difference in fonts, dark grey color of Snapshot1 vs the light grey color in Snapshot2 in the background) The file navigation bar bellow the menu bar (notice the 'Home' button there and also the left arrow button) The left-hand side navigation bar (font, background color and color of selected folder) The old style look effects the GTK aspects of the interface, such as the menu, buttons, mouse pointer etc. Another observation is that changing the GTK themes does using gnome-tweak-tool when the old style look is loaded does NOT work. However, this works when the regular look is loaded. How can I ensure that the old-fashioned look does not load on boot?

    Read the article

  • Ubuntu Wubi Booting Problem

    - by D3s7
    i have a problem with my Ubuntu 12.04 Wubi installation, sometimes when booting, the computer will get to the purple screen without the Ubuntu logo, then will go to a black screen and then lots of white saccaged colors will appear and i will be taken to the login page. But sometimes, it just get stuck on the black screen and does nothing and i have to hard shutdown and retry it until it works. What may cause this problem and why? I can shutdown correctly. Thanks for helping. Edit: RADEON HD 7650M Graphic card with latest available Drivers on amd's driver download site (fglrx drivers caused shutdown problems so i removed them). Screen resolution is 1600x900.

    Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >