Search Results

Search found 1875 results on 75 pages for 'tom irons'.

Page 24/75 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• DVI to VGA adapter only working in one output

  - by Tom Jenkinson

  I have a AMD Radeon HD 6800 Series graphics card which has 2 DVI outputs. I tried to set it up with 2 monitors which both have vga connectors on the end and used 2 dvi to vga adapters like these. http://www.tvcables.co.uk/images/items/vga-to-dvi.jpg For some reason nothing would reach the monitor, it would remain in standby, if it was plugged into the second output. I tried all the different combinations of cables, adapters and the 2 monitors but whichever monitor that was plugged into the second output wouldn't work. I then randomly decided to plug a different monitor into the second output which has a dvi connector on the end so there was no need for an adapter and plugged it in and it worked! Does anyone know why the second output on the graphics card won't work with a dvi to vga adapter (and the first output will)? I'm really confused! Thanks

  Read the article

• TCP 3 way handshake

  - by Tom

  Hi, i'm just observing what NMAP is doing for the 3 ports it reports are open. I understand what a half-scan attack is, but what's happening doesnt make sense. NMAP is reporting ports 139 are 445 are open..... all fine. But when i look at the control bits, NMAP never sends RST once it has found out the port is open, It does this for port 135- but not 139 and 445. This is what happens: (I HAVE OMITTED THE victim's replies) Sends a 2 (SYN) Sends a 16 (ACK) Sends a 24 (ACK + PST) Sends a 16 (ACK) Sends a 17 (ACK + FIN) I dont get why NMAP doesnt 'RST' ports 139 and 445??

  Read the article

• Conditionally set an Apache environment variable

  - by Tom McCarthy

  I would like to conditionally set the value of an Apache2 environment variable and assign a default value if one of the conditions is not met. This example if a simplification of what I'm trying to do but, in effect, if the subdomain portion of the host name is hr, finance or marketing I want to set an environment var named REQUEST_TYPE to 2, 3 or 4 respectively. Otherwise it should be 1. I tried the following configuration in httpd.conf: <VirtualHost *:80> ServerName foo.com ServerAlias *.foo.com DocumentRoot /var/www/html SetEnv REQUEST_TYPE 1 SetEnvIfNoCase Host ^hr\. REQUEST_TYPE=2 SetEnvIfNoCase Host ^finance\. REQUEST_TYPE=3 SetEnvIfNoCase Host ^marketing\. REQUEST_TYPE=4 </VirtualHost> However, the variable is always assigned a value of 1. The only way I have so far been able get it to work is to replace: SetEnv REQUEST_TYPE 1 with a regular expression containing a negative lookahead: SetEnvIfNoCase Host ^(?!hr.|finance.|marketing.) REQUEST_TYPE=1 Is there a better way to assign the default value of 1? As I add more subdomain conditions the regular expression could get ugly. Also, if I want to allow another request attribute to affect the REQUEST_TYPE (e.g. if Remote_Addr = 192.168.1.[100-150] then REQUEST_TYPE = 5) then my current method of assigning a default value (i.e. using the regular expression with a negative lookahead) probaby won't work.

  Read the article

• create vmware virtual machine via command line on linux system

  - by tom smith

  evaluating/investigating vmware, and how you create a "virtual machine" using the command line for rhel/centos. basically, i want to be able to create a test virtual machine and then be able to run the VM on another system using the virtual player. so, i'm looking for pointers/articles/instructions that detail what i need (in terms of tools/apps) and the steps needed to accomplish this. i've seen a few articles/sites that discuss creating virtual machines, but they all involve using the GUI. thanks update:: while vmware is the company. there are different tools/apps provided to create a Virtual Machine. Basically, I want to do a test, to ultimately have a Virtual Machine/Image that can be run on a separate server using the vmplayer app I've seen docs that discuss using the GUI to create the VM, but haven't found any (yet) that discuss how to accomplish this using the command line approach. thanks...

  Read the article

• Terrible Performance with SATA Drives on Dell PowerEdge, steps to troubleshoot?

  - by Tom

  I had asked this question earlier and the question went missing so here it is again. Bought a DELL Poweredge 2950 to use as in-house QA Server. Disk performance is beyond terrible, 1000-4000 ms response time on the drive with our SQL Server database .mdf. Sql Server disk queue upwards of 300 at times. I'm a software guy, can anyone help me with steps to determine the issue? I don't know what RAID controller it has, how can I determine that? I'm speculating it could be BIOS issue. Perhaps the server used to have another kind of drive in it and when I added SATA the ??? buffer size is wrong??? Perhaps I chose wrong options (chose defaults) when setting up the RAID 1 arrays? I thought RAID 1 was a performance array?

  Read the article

• Which twitter client can synchronize unread tweets?

  - by Tom Burger

  Right now I'm forced to read all the tweets in a single client on a single device (TweetDeck on my Android phone). If I would switch to another device and/or client, I would need to search for the last unread tweet, which is sometimes complicated (too many tweets). So, the question: Is there a client who can keep the status (read/unread) on tweets across multiple devices? My target systems would be now Android and MS Windows, but also Linux might be handy.

  Read the article

• CMD Command to create folder for each file and move file into folder

  - by Tom

  I need a command that can be run from the command line to create a folder for each file (based on the file-name) in a directory and then move the file into the newly created folders. Example : Starting Folder: Dog.jpg Cat.jpg The following command works great at creating a folder for each filename in the current working directory. for %i in (*) do md "%~ni" Result Folder: \Dog\ \Cat\ Dog.jpg Cat.jpg I need to take this one step further and move the file into the folder. What I want to achieve is: \Dog\Dog.jpg \Cat\Cat.jpg Can someone help me with one command to do all of this?

  Read the article

• Offline installer for .net 3.5 sp1 not working

  - by Tim Tom

  I download a big file of .Net 3.5 SP1 from http://download.microsoft.com/download/2/0/e/20e90413-712f-438c-988e-fdaa79a8ac3d/dotnetfx35.exe Now when I try to install it on Windows Server 2012, I get the following screenshot: What the?? When will the microsoft learn? Now this is a loop. When I try to install from Server Manager, I get installation cannot be done. It needs installation disk. Does that mean I can't install at all without the installation disk in presence?

  Read the article

• WPF Application from Visual Studio 2010 crashes Windows 7

  - by Tom

  Hello, I am using visual studio 2010 on Windows 7 64bit. I compiled and ran a simple application basically a thing a child could make. Well the second it started to run, it froze my computer and rendered it unresponsive. It continues to do this every time and for every application. Any ideas why this is happening?

  Read the article

• What do you think iPad is util for?

  - by Tom Brito

  "Ultimate browsing experience" apart, what can you say iPad is util for?

  Read the article

• Creating multiple SFTP users for one account

  - by Tom Marthenal

  I'm in the process of migrating an aging shared-hosting system to more modern technologies. Right now, plain old insecure FTP is the only way for customers to access their files. I plan on replacing this with SFTP, but I need a way to create multiple SFTP users that correspond to one UNIX account. A customer has one account on the machine (e.g. customer) with a home directory like /home/customer/. Our clients are used to being able to create an arbitrary number of FTP accounts for their domains (to give out to different people). We need the same capability with SFTP. My first thought is to use SSH keys and just add each new "user" to authorized_keys, but this is confusing for our customers, many of whom are not technically-inclined and would prefer to stick with passwords. SSH is not an issue, only SFTP is available. How can we create multiple SFTP accounts (customer, customer_developer1, customer_developer2, etc.) that all function as equivalents and don't interfere with file permissions (ideally, all files should retain customer as their owner)? My initial thought was some kind of PAM module, but I don't have a clear idea of how to accomplish this within our constraints. We are open to using an alternative SSH daemon if OpenSSH isn't suitable for our situation; again, it needs to support only SFTP and not SSH. Currently our SSH configuration has this appended to it in order to jail the users in their own directories: # all customers have group 'customer' Match group customer ChrootDirectory /home/%u # jail in home directories AllowTcpForwarding no X11Forwarding no ForceCommand internal-sftp # force SFTP PasswordAuthentication yes # for non-customer accounts we use keys instead Our servers are running Ubuntu 12.04 LTS.

  Read the article

• Can I prevent Internet Explorer 8 from running scripts until the page is loaded?

  - by Tom W

  When trying to veiw a number of different websites in IE8, I get the following error message: HTML Parsing Error: Unable to modify the parent container element before the child element is closed (KB927917) On investigating the error message, it appears the script is trying to modify parts of the page before it is fully loaded. Is there a setting in IE8 I can change to prevent scripts from running until the page is fully loaded? EDIT: The sites in question used to work just fine, until I had to re-install IE8 for a seperate issue. Then they stopped working.

  Read the article

• How can I force my browser to search Google in English?

  - by Tom Wijsman

  I'm too bored of seeing sites like Google and such show up in my native language, I would rather like them to be in English. Yet, I have to explicitly change the URL to .com and en and that kind of parameters in order for them to show up in English. Can I somehow force this? So, how is Google configured? However, it is set to English on the site itself so it has to be my browser: Then, how does my browser land up on non-english pages, like Google? It usually shows up in non-English when I'm performing a search, which uses: {google:baseURL}search?{google:RLZ}{google:acceptedSuggestion}{google:originalQueryForSuggestion}{google:searchFieldtrialParameter}{google:instantFieldTrialGroupParameter}sourceid=chrome&ie={inputEncoding}&q=%s When performing a search, it fills these variables in with non-english values. How can I tell my browser to fill these in with the English values? My Google Chrome options give preference to English:

  Read the article

• Run a .bat file in a scheduled task without a window

  - by Tom Dunham

  I have a scheduled task that starts a batch script that runs robocopy every hour. Every time it runs a window pops up on the desktop with robocopy's output, which I don't really want to see. I managed to make the window appear minimized by making the scheduled job run cmd /c start /min mybat.bat but that gives me a new command window every hour. I was surprised by this, given cmd /c "Carries out the command specified by string and then terminates" - I must have misunderstood the docs. Is there a way to run a batch script without it popping up a cmd window?

  Read the article

• Is it possible to use rsync over sftp (without an ssh shell) ?

  - by Tom Feiner

  Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

  Read the article

• Bluetooth Headset drivers on Windows 7

  - by Tom Ribbens

  I have a Dell Precision with integrated bluetooth from work. I wanted to connect either one of my two bluetooth headsets (Plantronics UC Voyager Pro v2 and Sennheiser MM450X) in order to make calls with it using our Cisco IP Communicator. In both cases, the bluetooth pairs ok. Then Windows tries to install drivers, and fails, leaving the device useless. The devices work perfectly with my phone and tablet (both android). What can I do to get it to work? I can't seem to find drivers on either the Plantronics or the Sennheiser site. I am using the Plantronics without the USB dongle they provide, because that is temporarily misplaced :).

  Read the article

• What's the best way to get a stored POP3 password out of Outlook 2007?

  - by Tom Morris

  If you have a password for a POP3 account in Outlook 2007 (Windows 7 Home Premium) and you then forget the password, how do you retrieve it? I tried copy-and-paste. No go. I downloaded Mail PassView, but upon installing it, AVG said it was malware, so I removed it. I eventually found the account details by opening up RegEdit, and found it in HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\Outlook\ (...) but it was encoded in REG_BINARY. I Googled around and found various Visual Basic routines for decoding it but being a Unix dork I had absolutely no idea what to do with said scripts. By this point, I gave up and managed to get hold of the password by another means (it was written down on a piece of paper in the briefcase of the owner of the account - I know, it makes the inner sysadmin rage). I also attempted to write a simple POP3 server in Python and then get Outlook to log on to it, but that didn't really work out (it was about 4am at that point). For future reference, is there an easy and sensible way of doing this? Is Mail PassView actually evil spyware or was AVG just giving me a false positive? (Any chance of Windows 8 having something like OS X's Keychain?)

  Read the article

• Hidden features of Ubuntu

  - by Tom Brito

  That I know: In command line, use TAB to autocomplete the commands. You need just to select a text to copy it, and use mouse middle button to paste. Which other "untold" secrets Ubuntu hides? obs. I don't know which of the items I told are for any Linux or Ubuntu specific.

  Read the article

• Debugging info for authentication in tomcat

  - by Tom A

  I have a JDBC realm setup and a web-app using basic authentication, but I can't get it to work. It is putting up the password dialog but it never succeeds. If I could get the authentication process to spit out some logs, I would be fine. I have debug="99" in my realm specification but I see nothing getting logged in the usual places. Am I missing something?

  Read the article

• Using watch with pipes

  - by Tom

  Hi! I'd like to run this command: watch -n 1 tail -n 200 log/site_dev.log | grep Doctrine But it does not run, because "I think" that the grep tries to run on the watch instead of the tail... Is there a way to do something like watch -n 1 (tail -n 200 log/site_dev.log | grep Doctrine) Thanks a lot!

  Read the article

• Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

  - by Tom

  I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

  Read the article

• How can I make Excel correlate data from two data sets into a single graph?

  - by Tom Ritter

  I have two datasets, one being sparser than the other. They look like this: Data Set 1: 4 50 5 55 6 60 7 70 8 80 Data Set 2: 4 10 6 20 8 30 I have several hundred points instead of this few. I want them in the same graph, the X axis being 4-8, the y axis being 0-100ish, and two lines, one for each data set. What I get is two lines, not correlated at all along the X axis, and the X axis being labeled from one of the two datasets, with the labels being wrong for the other. The smaller data set is one-point-per-tick on the x axis, when I need it to skip ticks and actually line up with the other data set. Not married to excel, willing to try this in something else if it's free.

  Read the article

• IP-restricted port forwarding with iptables

  - by Tom

  For an example, I have two authorized client computers, 1.1.1.1 and 2.1.1.1. My server running iptables is 3.1.1.1 and my firewalled web server is 4.1.1.1. When one of the authorized client IPs connects to 3.1.1.1 on port 80, I would like the connection to be forwarded to 4.1.1.1 on port 8888. If any other IP attempts to connect I would like it to refuse/drop the connection. What iptables config would accomplish this? Is there something more specific out there that would be better suited for this job?

  Read the article

• add blank for 0 result into existing formula

  - by Tom

  is there any way to use this formula [<30,0,1)) for a group of cells in Sheet1!(A14:I100)] and if result == 0 insert blank or add [=IF(O16=0,"",] somehow so all 0 results just show a blank result. I'm just not sure how to add this to my formula so if Cell a176= 07:48:16 and formula [<30,0,1)) for a group of cells in Sheet1!(A14:I100)] changes it to 468, all is good - however if Cell a176= 00:00:16, the result is "0" - I would like the result to be "" blank "" instead of "0". any ideas??

  Read the article

• Fortigate restrict traffic through one external IP

  - by Tom O'Connor

  I've got a fortigate 400A at a client's site. They've got a /26 from British Telecom, and we're using 4 of those IPs as a NAT Pool. Is there a way to say that traffic from 172.18.4.40-45 can only ever come out of (and hence go back into) x.x.x.140 as the external IP? We're having some problems with SIP which looks like it's coming out of one, and trying to go back into another. I tried enabling asymmetric routing, didn't work. I tried setting a VIP, but even when I did that, it didn't appear to do anything. Any ideas? I can probably post some firewall snippets if need be.. Tell me what you want to see. SIP ALG config system settings set sip-helper disable set sip-nat-trace disable set sip-tcp-port 5061 set sip-udp-port 5061 set multicast-forward enable end Interesting Sidenote VoIP phones, with no special configuration can register fine to proxy.sipgate.co.uk, which has an IP address of 217.10.79.16. Which is cool. Two phones are using a different provider, whose proxy IP address is 178.255.x.x. These phones can register for outbound, but inbound INVITEs never make it to the phone. Is it possible that the Fortigate is having trouble with 178.255.x.x as it's got a 255 in it? Or am I just imagining things?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >