Search Results

Search found 650 results on 26 pages for 'universe hacker'.

Page 24/26 | < Previous Page | 20 21 22 23 24 25 26  | Next Page >

  • Ubuntu 12.04: apt-get "failed to fetch"; apt is trying to fetch via old static IP

    - by gabe
    Sample error: W: Failed to fetch http://security.ubuntu.com/ubuntu/dists/precise-security/universe/i18n/Translation-en Unable to connect to 192.168.1.70:8118: Now this was working just fine until I changed the IP this morning. I have the server set to a static IP of 10.0.1.70 and for years it has been 192.168.1.70 - the IP apt-get is trying to use right now. I use privoxy and tor thus the 8118 port. Like I said it all worked until I changed the static IP from 192.168.1.70 to 10.0.1.70. I was forced to do so because of router issues. (Long and involved story, I didn't really want to change the IP because I know something like this would happen.) The setup for TOR/Privoxy requires that has you point Privoxy at TOR via 127.0.0.1:9050. Then point curl, etc to Privoxy via $HOME/.bashrc. Typically you would set the listen to IP for Privoxy to 127.0.0.1 but if you want it accessible to the rest of the LAN you set the IP to the server's LAN IP. Which I did a long time ago and was working fine until this morning. I have changed all instances of 192.168.1.70 to 10.0.1.70 in both /etc/privoxy/config and $HOME/.bashrc. What makes this really strange for me is that curl is working fine. I curl icanhazip.com and voila I get a new IP every 10 minutes or so. I curl CNN.com and I get the short but sweet permanently moved to www.cnn.com message I expect. Firefox works fine. Ping works fine. And I've tested all of this via Remote Desktop over my LAN. So the connection appears to be fine for everything except apt. I've also rebooted hoping that would clear 192.168.1.70 from apt. So the connection to the internet and DNS aren't an issue for these programs. And they are, as far as I can tell, using Privoxy/TOR just fine. The real irony here is that I've tried to open up Privoxy to go to Ubuntu's servers directly without going through TOR to speed up the downloads from Ubuntu (did this months ago). So somewhere that I have not been able to find, apt has stored the IP 192.168.1.70. And 192.168.1.70 is no longer valid. Thanks for the help

    Read the article

  • Why is 50.22.53.71 hitting my localhost node.js in an attempt to find a php setup

    - by laggingreflex
    I just created a new app using angular-fullstack yeoman generator, edited it a bit to my liking, and ran it with grunt on my localhost, and immediately upon starting up I get this flood of requests to paths that I haven't even defined. Is this a hacking attempt? And if so, how does the hacker (human or bot) immediately know where my server is and when it came online? Note that I haven't made anything online, it's just a localhost setup and I'm merely connected to the internet. (Although my router does allow 80 port incoming.) Whois shows that the IP address belongs to a SoftLayer Technologies. Never heard of it. Express server listening on 80, in development mode GET / [200] | 127.0.0.1 (Chrome 31.0.1650) GET /w00tw00t.at.blackhats.romanian.anti-sec:) [404] | 50.22.53.71 (Other) GET /scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/pma/scripts/setup.php [404] | 50.22.53.71 (Other) GET /admin/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /db/scripts/setup.php [404] | 50.22.53.71 (Other) GET /dbadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /myadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /mysql/scripts/setup.php [404] | 50.22.53.71 (Other) GET /mysqladmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /typo3/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin1/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin2/scripts/setup.php [404] | 50.22.53.71 (Other) GET /pma/scripts/setup.php [404] | 50.22.53.71 (Other) GET /web/phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /xampp/phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /web/scripts/setup.php [404] | 50.22.53.71 (Other) GET /php-my-admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /websql/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpmyadmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2/scripts/setup.php [404] | 50.22.53.71 (Other) GET /php-my-admin/scripts/setup.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2.5.5/index.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin-2.5.5-pl1/index.php [404] | 50.22.53.71 (Other) GET /phpMyAdmin/ [404] | 50.22.53.71 (Other) GET /phpmyadmin/ [404] | 50.22.53.71 (Other) GET /mysqladmin/ [404] | 50.22.53.71 (Other)

    Read the article

  • nginx - Redirect specific page paths to https while keeping everything else on http (in a single server call)?

    - by Kris Anderson
    From what I've gathered so far it's clear that running if statements in nginx should be avoided at all costs. Most of the examples I've found so far regarding specific page redirects involve multiple servers being used. But, isn't that a bit wasteful? I'm not sure, but I would think multiple servers to accomplish this would be somewhat slower then a single server when under heavy load. My current server call is this: server { listen 10.0.0.60:80; listen 10.0.0.60:443 default ssl; #other code } What I want to do is redirect certain http requests to https requests. For example, I want /login/ and /my-account/ to always be forced to use SSL. If you're on /help/ though, I want that served over the default http. Is there a way to accomplish this within a single server call? Or is there no downside to using 2 server calls to get this working? nginx seems to be under pretty active development and a lot of the older guides I've followed were from times when you couldn't listen to requests for port 80 and 443 within the same server call. But now that nginx has been updated to support that (I'm running 1.2.4), I'm wondering if there's a "best practice" way of handling this today. Any help would be greatly appreciated. EDIT: I did find this guide: http://redant.com.au/blog/manage-ssl-redirection-in-nginx-using-maps-and-save-the-universe/ and I updated my code as follows: map $uri $my_preferred_proto { default "http"; ~^/#/user/login "https"; } server { listen 10.0.0.60:80; ## listen for ipv4; this line is default and implied listen 10.0.0.60:443 default ssl; if ($my_preferred_proto = "none") { set $my_preferred_proto $scheme; } if ($my_preferred_proto != $scheme) { return 301 $my_preferred_proto://mysite.com$request_uri; } It's not working though. When I change the default to https everything is redirected to SSL so it does somewhat work. But the redirect of /#/user/login is not redirecting to HTTPS. Any ideas? Also, is this a good way to go about this?

    Read the article

  • Pinning based on origin of a reprepro repository.

    - by Shtééf
    I'm on Ubuntu 10.04, and trying to set up a repository using reprepro. I'd also like the pin everything in that repository to be preferred over anything else, even if packages are older versions. (It will only contain a select set of packages.) However, I cannot seem to get the pinning to work, and believe it has something to do with the repository side of things, rather than the apt configuration on the client. I've taken the following steps to set up my repository Installed a web server (my personal choice here is Cherokee), Created the directory /var/www/apt/, Created the file conf/distributions, like so: Origin: Shteef Label: Shteef Suite: lucid Version: 10.04 Codename: lucid Architectures: i386 amd64 source Components: main Description: My personal repository Ran reprepro export from the /var/www/apt/ directory. Now on any other machine, I can add this (empty) repository over HTTP to my /etc/apt/sources.list, and run apt-get update without any errors: Ign http://archive.lan lucid Release.gpg Ign http://archive.lan/apt/ lucid/main Translation-en_US Get:1 http://archive.lan lucid Release [2,244B] Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Ign http://archive.lan lucid/main Packages Ign http://archive.lan lucid/main Sources Hit http://archive.lan lucid/main Packages Hit http://archive.lan lucid/main Sources In my case, now I want to use an old version of Asterisk, namely Asterisk 1.4. I rebuilt the asterisk-1:1.4.21.2~dfsg-3ubuntu2.1 package from Ubuntu 9.04 (with some small changes to fix dependencies) and uploaded it to my repository. At this point I can see the new package in aptitude, but it naturally prefers the newer Asterisk 1.6 currently in the Ubuntu 10.04 repositories. To try and fix that, I have created /etc/apt/preferences.d/personal like so: Package: * Pin: release o=Shteef Pin-Priority: 1000 But when I try to install the asterisk package, it will still prefer the 1.6 version over my own 1.4 version. This is what apt-cache policy asterisk shows: asterisk: Installed: (none) Candidate: 1:1.6.2.5-0ubuntu1 Version table: 1:1.6.2.5-0ubuntu1 0 500 http://nl.archive.ubuntu.com/ubuntu/ lucid/universe Packages 1:1.4.21.2~dfsg-3ubuntu2.1shteef1 0 500 http://archive.lan/apt/ lucid/main Packages Clearly, it is not picking up my pin. In fact, when I run just apt-cache policy, I get the following: Package files: 100 /var/lib/dpkg/status release a=now 500 http://archive.lan/apt/ lucid/main Packages origin archive.lan 500 http://security.ubuntu.com/ubuntu/ lucid-security/multiverse Packages release v=10.04,o=Ubuntu,a=lucid-security,n=lucid,l=Ubuntu,c=multiverse origin security.ubuntu.com [...] Unlike Ubuntu's repository, apt doesn't seem to pick up a release-line at all for my own repository. I'm suspecting this is the cause why I can't pin on release o=Shteef in my preferences file. But I can't find any noticable difference between my repository's Release files and Ubuntu's that would cause this. Is there a step I've missed or mistake I've made in setting up my repository?

    Read the article

  • Wiimote accelerometer input on Windows? (in 2013 - Glovepie alternative?)

    - by user568458
    There were a few options for getting accelerometer input into Windows using a Nintendo Wiimote. As of mid 2013, these projects seem to be dead, corrupted with malware, or both. Are there any tools out there that can do this that are still available (and not full of malware)? Quick roundup of the options that used to exist, or that still exist but aren't suitable: Glovepie, which used to be the most recommended option, appears to be dead: it's own website hacked, its creator's googlepages page full of strange stuff that sounds like hacker-humour about the end of the world... (I'd rather not link to them, very dubious stuff...), and lots of forum threads asking if it's a dead project with comments along the lines of "I heard that the author intends to return to it" dated 2011... Wiiuse seems to be dead: its sourceforge page simply says "Error.", its own website has turned into a squatter page. There apparently was an extension for Autohotkey that allowed Wiimote input, but I've seen warnings that this too is now full of malware (see final commentin above link) Everything else I can find about using Wiimotes as input on Windows - for example, Johnny Lee Cheng's work - seems to be exclusively about using infrared or sensor bar, or tied to a specific purpose (e.g. FPS gaming). My main interest is in the accelerometer, and buttons if possible (although something that supports the IR stuff too would be ideal). Is there anything that works for getting Wiimote accelerometer input into Windows that is reliable and not a malware-fest? If anyone's interested in "Why?", it's to use the Wiimote as an audio / midi controller: to use movement, pitch, roll etc to modulate lots of different sound variables at once with one hand. Wiimotes are great for this, and Glovepie used to be the standard way to make this work (e.g. see for example this tutorial, and this one, ignore the unrelated video; I've also seen musicians using wiimote/glovepie setups at gigs, creating some really unique sounds). As of 2013, however, Glovepie seems to be a dead and thoroughly hacked project, sadly. Is there anything else? With or without MotionPlus is fine (with would be better). If anyone knows of any worthy alternatives to Wiimotes in terms of price and quality that can be made to work with a PC, that would also be great: but in my research I coulnd't find any (here's a link to someone reaching the same conclusion). found some potentially relevant stuff here, not had time to test any of it yet though - http://stackoverflow.com/questions/2984450/using-accelerometer-in-wiimote-for-physics-practicals

    Read the article

  • unable to install anything on ubuntu 9.10 with aptitude

    - by Srisa
    Hello, Earlier i could install software by using the 'sudo aptitude install ' command. Today when i tried to install rkhunter i am getting errors. It is not just rkhunter, i am not able to install anything. Here is the text output: user@server:~$ sudo aptitude install rkhunter ................ ................ 20% [3 rkhunter 947/271kB 0%] Get:4 http://archive.ubuntu.com karmic/universe unhide 20080519-4 [832kB] 40% [4 unhide 2955/832kB 0%] 100% [Working] Fetched 1394kB in 1s (825kB/s) Preconfiguring packages ... Selecting previously deselected package lsof. (Reading database ... ................ (Reading database ... 95% (Reading database ... 100% (Reading database ... 20076 files and directories currently installed.) Unpacking lsof (from .../lsof_4.81.dfsg.1-1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb (--unpack): unable to create `/usr/bin/lsof.dpkg-new' (while processing `./usr/bin/lsof'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package libmd5-perl. Unpacking libmd5-perl (from .../libmd5-perl_2.03-1_all.deb) ... Selecting previously deselected package rkhunter. Unpacking rkhunter (from .../rkhunter_1.3.4-5_all.deb) ... dpkg: error processing /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb (--unpack): unable to create `/usr/bin/rkhunter.dpkg-new' (while processing `./usr/bin/rkhunter'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package unhide. Unpacking unhide (from .../unhide_20080519-4_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/unhide_20080519-4_amd64.deb (--unpack): unable to create `/usr/sbin/unhide-posix.dpkg-new' (while processing `./usr/sbin/unhide-posix'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb /var/cache/apt/archives/unhide_20080519-4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up libmd5-perl (2.03-1) ... Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree Reading state information... 0% ........... .................... I have removed some lines to reduce the text. All the error messages are in here though. My experience with linux is limited and i am not sure what the problem is or how it is to be resolved. Thanks.

    Read the article

  • How much did it cost our competitor to DDoS us at 50 Gbps for two weeks?

    - by MiniQuark
    I know that this question may sound like an invalid serverfault question, but I believe that it's quite valid: the amount of time and effort that a sysadmin should spend on DDoS protection is a direct function of typical DDoS prices. Let me rephrase this: protecting a web site against small attacks is one thing, but resisting 50 Gbps of UDP flood is another and requires time & money. Deciding whether or not to spend that time & money depends on whether such an attack is likely or not, and this in turn depends on how cheap and simple such an attack is for the attacker. So here's the full story: our company has been victim to a massive DDoS attack (over 50 Gbps of UDP traffic, full-time during 2 weeks). We are pretty sure that it's one of our competitors, and we actually know which one, because we were the only two remaining competitors on a very big request for proposal, and the DDoS attack magically stopped the day we won (double hurray, by the way)! These people have proved in the past that they are very dishonest, but we know that they are not technical at all, so we believe that they simply paid for some botnet DDoS service. I would like to know how much these services typically cost, for such a large scale attack. Please do not give any link to such services, I would really hate to give these people any publicity. I understand that a hacker could very well do this for free, but what's a typical price for such an attack if our competitors paid for it through some kind of botnet service? It is really starting to scare me (if we're talking thousands of dollars here, then I am really going to freak off: who knows, they might just hire a hit-man one day?). Of course we filed a complaint, but the police says that they cannot do much about it (DDoS attacks are virtually untraceable, so they say), and our suspicions are not enough to justify them raiding our competitor's offices to search for proofs. For your information, we now changed our infrastructure to be able to sustain such attacks: we now use a major CDN service so that our servers are not directly affected by DDoS attacks. Requests for dynamic pages do get proxied to our servers, but for low level attacks (UDP flood, or Syn floods, for example) we only receive legitimate trafic, so we're fine. If they decide to launch higher level attacks (HTTP flood or slowloris attacks for example), most of the load should be handled by the CDN... at least I hope so! Thank you very much for your help.

    Read the article

  • Book Review Charlene Li's New Book: Open Leadership

    - by david.talamelli
    A few weeks ago, I was surprised when I looked in our mail box. I had received an Advance Copy of Charlene Li's new book titled "Open Leadership: How Social Technology Can Transform the Way You Lead". Charlene sent a tweet a while back asking anyone interested in receiving the book to submit their details. I sent off my details and didn't think I would hear anything back, so it was a pleasant surprise. With that I almost feel bad that it has taken me 3 weeks to read her book. It took this long mainly because it has been hard to fit in some quality reading time for myself with work, the kids, volunteering, etc..... I am happy to report I have finished her book and wanted to run through my initial thoughts with you. I first came across Charlene Li after reading her book "Groundswell" a few years ago, her latest book "Open Leadership" is a follow on from Groundswell and to me it seems like a natural progression from the question "Ok the business landscape is changing, what do we do now?" For me these two books have a different writing style to them. Groundswell from memory spoke about broad social media concepts and adoption and alerted us to some of the changes taking place in the SM landscape. Open Leadership seems to be focussed on taking those broad concepts and finding ways to implement them into your environment. That is breaking broad concepts down into individual action items that can be measured and analysed. As the business world changes Leaders must change their approach and let go of control to more control. One of the things I love reading about is seeing real life examples of how people and organisations are making these things happen. In this book Charlene has collected some great collateral and case studies from companies such as Cisco, Best Buy, The Red Cross and The State Bank of India (as a side-note, I wish now that I submitted my input for the Leaders I work with here at Oracle - there are some great examples here of people who empower their staff). As society becomes more adept at using social media it is inevitable that Leaders must become open with their employees, clients and partners. From the book some of the key points I took away are (I actually took away a lot more from this book, this is just an overview) : 1) Organisations should encourage risk taking. Without being a "hacker", how can we improve ourselves, our processes, our business, etc... The old saying you only fail by not trying applies here. If Leaders create a culture where people are afraid to stick their neck out - how will you innovate? 2) Leaders need to lead by example - if you want to promote an open and transparent business, a Leader needs to exemplify the traits they would like to see out of their employees. 3) The definition of a Leader is changing, open leadership is about being a catalyst to change that uses networks to spread a vision as opposed to traditional leadership that is viewed as a role. 4) There is a cultural and business shift taking place. Information is more wide-spread and is being disseminated faster than any other time in the past. Leaders who are open and transparent will thrive in this new business environment. 5) Leadership is not defined by a title - it is defined by a person's actions. Also anyone can be a Leader or has Leadership potential in them- it is a matter of drawing that out of people. I found this book useful and I also found myself looking at my own actions and the actions of others around me (including my management) to see how open and transparent I am in my work. For me I am glad I read this book as it validated my own thoughts of the changes we are seeing take place. This book has certainly given me some new ideas and helped me push my own boundaries of what I can do. The book has a number of action plans at the end of some of the chapters such as "Conducting you Openness Audit" that I think have helped me take thoughts and ideas and turn them into concrete action items. I have included a link to the introduction of the book here if anyone wants to have a read of it. If anyone else has read this book, it would be great to hear your thoughts/comments/review. Leave your comments below. This article was originally posted on David Talamelli's Blog - David's Journal on Tap

    Read the article

  • Can't install wine (or ia32-libs) in Ubuntu 12.10 64 bit

    - by carestad
    As already pointed out here, people seems to have issues with installing wine in the latest version of Ubuntu. I'm suspecting this only happens with 64 bit users. For example, when trying to install wine, wine1.4, wine1.4:i386, wine1.5, wine1.5:i386, ia32-libs or ia32-libs:i386 with apt-get, I get a lot of dependency errors. Doing a sudo apt-get -f install doesn't seem to do the trick, neither does using aptitude. The errors I get is normally that the packages depend on some :i386 package, but installing those manually doesn't work either because they also have dependency issues (isn't APT supposed to do this automatically?!). I also downloaded CrossOver today and tried installing the .deb manually, but the dependency issues show up there as well. When running sudo apt-get -f install after trying to install the CrossOver .deb, apt-get wants to purge the following packages: ia32-crossover intel-gpu-tools libdrm-nouveau2 libgl1-mesa-dri libva-x11-1 ubuntu-desktop vlc xorg xserver-xorg-video-ati xserver-xorg-video-intel xserver-xorg-video-modesetting xserver-xorg-video-openchrome xserver-xorg-video-radeon xserver-xorg-video-vmware What I've tried so far (and didn't work): Installing synaptic, reloading my repositories, searching for ia32 and installing ia32-libs. Using Ubuntu Software Center to install Wine and ia32-libs. Using apt-get and aptitude to install all the differend varieties of the wine packages, both with and without the :i386 and -amd64 suffixes in package names. Disabling the universe and multiverse repos, run a sudo apt-get update and then re-enable them again. Boot a newly downloaded Ubuntu 12.10 x64 live USB and try to install all the different packages there. What I haven't tried (yet): Boot a newly downloaded Ubuntu 12.10 x32 image and try to install wine there (I'm just guessing that will work). Reinstall Ubuntu. Throw my computer out a window. wine alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: wine : Depends: wine1.5 but it is not going to be installed E: Unable to correct problems, you have held broken packages. wine-1.4 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4 (...) The following packages have unmet dependencies: wine1.4 : Depends: wine1.4-i386 (= 1.4.1-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.4:i386 alexander@cosmo:~$ LANGUAGE=en_US sudo apt-get install wine1.4:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.4:i386 : Depends: wine1.4-i386:i386 (= 1.4.1-0ubuntu1) Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. wine-1.5 alexander@cosmo:~$ sudo apt-get install wine1.5 (...) The following packages have unmet dependencies: wine1.5 : Depends: wine1.5-i386 (= 1.5.16-0ubuntu1) E: Unable to correct problems, you have held broken packages. wine-1.5:i386 alexander@cosmo:~$ sudo apt-get install wine1.5:i386 (...) The following packages have unmet dependencies: libaudio2:i386 : Depends: libxt6:i386 but it is not going to be installed libqtgui4:i386 : Depends: libsm6:i386 but it is not going to be installed libunity-webapps0 : Depends: unity-webapps-service but it is not going to be installed openssh-client : Depends: adduser (>= 3.10) but it is not going to be installed Depends: passwd ssh : Depends: openssh-server wine1.5:i386 : Depends: wine1.5-i386:i386 (= 1.5.16-0ubuntu1) but it is not going to be installed Depends: binfmt-support:i386 (>= 1.1.2) Depends: procps:i386 Recommends: cups-bsd:i386 Recommends: gnome-exe-thumbnailer:i386 but it is not installable or kde-runtime:i386 but it is not going to be installed Recommends: ttf-droid:i386 but it is not installable Recommends: ttf-liberation:i386 but it is not installable Recommends: ttf-mscorefonts-installer:i386 Recommends: ttf-umefont:i386 but it is not installable Recommends: ttf-unfonts-core:i386 but it is not installable Recommends: ttf-wqy-microhei:i386 but it is not installable Recommends: winbind:i386 Recommends: winetricks:i386 but it is not going to be installed Recommends: xdg-utils:i386 but it is not installable E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. ia32-libs alexander@cosmo:~$ sudo apt-get install ia32-libs (...) The following packages have unmet dependencies: ia32-libs : Depends: ia32-libs-multiarch E: Unable to correct problems, you have held broken packages. ia32-libs:i386 alexander@cosmo:~$ sudo apt-get install ia32-libs:i386 (...) Package ia32-libs:i386 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: lib32z1 lib32ncurses5 lib32bz2-1.0 lib32asound2 E: Package 'ia32-libs:i386' has no installation candidate

    Read the article

  • Error when trying to compile abgx360: C++ compiler cannot create executables

    - by era878
    I am trying to compile the abgx360 GUI. First I run home/eric/Desktop/abgx360-1.0.5/configure but I recieve this error: checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Then i run make but I recieve this error: make: * No rule to make target `/home/eric/Desktop/abgx360-1.0.5/Makefile.am', needed by `/home/eric/Desktop/abgx360-1.0.5/Makefile.in'. Stop. Here is my 'config.log': This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by abgx360gui configure 1.0.2, which was generated by GNU Autoconf 2.61. Invocation command line was $ /home/eric/Desktop/abgx360gui-1.0.2/configure ## --------- ## ## Platform. ## ## --------- ## hostname = Eric-Desktop uname -m = x86_64 uname -r = 2.6.35-27-generic uname -s = Linux uname -v = #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/sbin PATH: /usr/bin PATH: /sbin PATH: /bin PATH: /usr/games ## ----------- ## ## Core tests. ## ## ----------- ## configure:1800: checking for a BSD-compatible install configure:1856: result: /usr/bin/install -c configure:1867: checking whether build environment is sane configure:1910: result: yes configure:1938: checking for a thread-safe mkdir -p configure:1977: result: /bin/mkdir -p configure:1990: checking for gawk configure:2020: result: no configure:1990: checking for mawk configure:2006: found /usr/bin/mawk configure:2017: result: mawk configure:2028: checking whether make sets $(MAKE) configure:2049: result: yes configure:2302: checking for g++ configure:2332: result: no configure:2302: checking for c++ configure:2332: result: no configure:2302: checking for gpp configure:2332: result: no configure:2302: checking for aCC configure:2332: result: no configure:2302: checking for CC configure:2332: result: no configure:2302: checking for cxx configure:2332: result: no configure:2302: checking for cc++ configure:2332: result: no configure:2302: checking for cl.exe configure:2332: result: no configure:2302: checking for FCC configure:2332: result: no configure:2302: checking for KCC configure:2332: result: no configure:2302: checking for RCC configure:2332: result: no configure:2302: checking for xlC_r configure:2332: result: no configure:2302: checking for xlC configure:2332: result: no configure:2360: checking for C++ compiler version configure:2367: g++ --version >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2368: g++: command not found configure:2370: $? = 127 configure:2377: g++ -v >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2378: g++: command not found configure:2380: $? = 127 configure:2387: g++ -V >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2388: g++: command not found configure:2390: $? = 127 configure:2413: checking for C++ compiler default output file name configure:2440: g++ conftest.cpp >&5 /home/eric/Desktop/abgx360gui-1.0.2/configure: line 2441: g++: command not found configure:2443: $? = 127 configure:2481: result: configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "abgx360gui" | #define PACKAGE_TARNAME "abgx360gui" | #define PACKAGE_VERSION "1.0.2" | #define PACKAGE_STRING "abgx360gui 1.0.2" | #define PACKAGE_BUGREPORT "" | #define PACKAGE "abgx360gui" | #define VERSION "1.0.2" | /* end confdefs.h. */ | | int | main () | { | | ; | return 0; | } configure:2488: error: C++ compiler cannot create executables See `config.log' for more details. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_env_CCC_set= ac_cv_env_CCC_value= ac_cv_env_CC_set= ac_cv_env_CC_value= ac_cv_env_CFLAGS_set= ac_cv_env_CFLAGS_value= ac_cv_env_CPPFLAGS_set= ac_cv_env_CPPFLAGS_value= ac_cv_env_CPP_set= ac_cv_env_CPP_value= ac_cv_env_CXXFLAGS_set= ac_cv_env_CXXFLAGS_value= ac_cv_env_CXX_set= ac_cv_env_CXX_value= ac_cv_env_LDFLAGS_set= ac_cv_env_LDFLAGS_value= ac_cv_env_LIBS_set= ac_cv_env_LIBS_value= ac_cv_env_build_alias_set= ac_cv_env_build_alias_value= ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_make_make_set=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run aclocal-1.10' AMDEPBACKSLASH='' AMDEP_FALSE='' AMDEP_TRUE='' AMTAR='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run tar' AUTOCONF='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run autoconf' AUTOHEADER='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run autoheader' AUTOMAKE='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run automake-1.10' AWK='mawk' CC='' CCDEPMODE='' CFLAGS='' CPP='' CPPFLAGS='' CXX='g++' CXXDEPMODE='' CXXFLAGS='' CYGPATH_W='echo' DEFS='' DEPDIR='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='' EXEEXT='' GREP='' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LDFLAGS='' LIBOBJS='' LIBS='' LTLIBOBJS='' MAKEINFO='${SHELL} /home/eric/Desktop/abgx360gui-1.0.2/missing --run makeinfo' OBJEXT='' PACKAGE='abgx360gui' PACKAGE_BUGREPORT='' PACKAGE_NAME='abgx360gui' PACKAGE_STRING='abgx360gui 1.0.2' PACKAGE_TARNAME='abgx360gui' PACKAGE_VERSION='1.0.2' PATH_SEPARATOR=':' SET_MAKE='' SHELL='/bin/bash' STRIP='' VERSION='1.0.2' WX_CFLAGS='' WX_CFLAGS_ONLY='' WX_CONFIG_PATH='' WX_CPPFLAGS='' WX_CXXFLAGS='' WX_CXXFLAGS_ONLY='' WX_LIBS='' WX_LIBS_STATIC='' WX_RESCOMP='' WX_VERSION='' ac_ct_CC='' ac_ct_CXX='' am__fastdepCC_FALSE='' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='' am__fastdepCXX_TRUE='' am__include='' am__isrc=' -I$(srcdir)' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build_alias='' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host_alias='' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' install_sh='$(SHELL) /home/eric/Desktop/abgx360gui-1.0.2/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' mkdir_p='/bin/mkdir -p' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='NONE' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "abgx360gui" #define PACKAGE_TARNAME "abgx360gui" #define PACKAGE_VERSION "1.0.2" #define PACKAGE_STRING "abgx360gui 1.0.2" #define PACKAGE_BUGREPORT "" #define PACKAGE "abgx360gui" #define VERSION "1.0.2" configure: exit 77

    Read the article

  • An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

    - by Brian Schroer
    Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O.    Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter.  Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers.  Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

    Read the article

  • SQL Developer Data Modeler v3.3 Early Adopter: Collaborative Design via Excel?

    - by thatjeffsmith
    As you may have heard last week, we have a new version of Oracle SQL Developer Data Modeler now available as an Early Adopter release. Version 3.3 has quite a few new features and I’ll be previewing them here. Today’s topic is our new Excel integration. It builds off of last week’s lesson: Search, so you may want to go read that first. They say it takes a village to raise a child. I say it takes a team to build a data model. You have your techie folks, your business folks, your in-betweeners, and your database geeks. Who gets to define how customers are represented and stored in your database? That data lives forever, so you better get it right from the beginning, or you’ll be living in a hacker’s paradise for years to come. Lots of good rantings, ravings, and advice on this topic in general on Karen Lopez’s (@datachick) blog. But let’s say you are the primary modeler on a project. You dutifully interview the business folks for their requirements. You sit down and start to model and think you’re pretty close. Now you need someone to confirm your assumptions and provide some feedback. Do you send your model over? Take a screenshot and blow it up on a whiteboard? Export to HTML and let them take a magic marker to their monitors? Or maybe you bite the bullet and install your modeling software on their desktops and take the hours or days required to train them up on how to use the the tool. Wouldn’t it be nice if they could just mark up their corrections in Excel and let you suck the updates back in? This is what we have started to build in Oracle SQL Developer Data Modeler. Let’s say you have a new table called ‘UT_STARTUPS.’ It looks a little something like this: A table in Oracle SQL Developer Data Modeler What I would like to do is have my team or co-worker review how I have defined those columns. Perhaps TIMESTAMP is overkill or maybe the column names themselves aren’t up to snuff. What I am going to do is now search for all the columns in my table, then export that to Excel. So do a search for UT_STARTUPS. Search, filter, then Report With the filter set to ‘Columns,’ if I do a report I’ll be only getting the columns that are resolving to my search term. So as long as my table name is unique in the model, I should get what I’m looking for. Here’s what I see when I click on the Report button: XLS or XLSX, either format is just fine I want to decide how the Column data is exported to Excel though, so I’m going to create a report template that I can use going forward. So click the ‘Manage’ button and setup a new template. I’m going to call mine ‘CollaborativeDevelopment.’ The templates allow me to define what properties are included in the reports. Once this is set, I’ll have the XLS file generated, and get to work Now let the Excel junkies do their stuff Note that not ALL of the report properties are update-able (yes, I made up a new word there) via Excel. We’ll have the full list of properties documented going forward, but in my Excel sheet, note that I can’t change the table name or the data types for the columns. I’m going to update some column names and supply ‘nice’ comments so the database users know what’s what. Here’s my input for the designer/architect/database dude: Be kind, please rew…use comments. Save the file, email it back to your modeler. Update the model from Excel That’s right, it’s a right mouse click from your model in the tree If everything goes right, you’ll see a nice confirmation message: It’s alive! Another to-do item on tap – making this dialog more informative. We’ll be showing exactly what in your model was updated from Excel. Let’s take another look at the model now Voila! Why are we doing this again? The goal is to reduce the number of round-trips from the modeler and the business process owner. One is used to working with Excel – why not allow them to mark up their changes in the tool they already know? This is an early adopter release and I anticipate this feature getting a good bit of tuning up before we release. Why don’t you download 3.3, give it a whirl, and let us know what you think?

    Read the article

  • SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos

    - by pinaldave
    TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Pinal Dave at TechEd India 2012 Family Event Every single year, TechEd is a special affair for my entire family.  Four months before the start of TechEd, I usually start to build the mental image of the event. I start to think  about various things. For the most part, what excites me most is presenting a session and meeting friends. Seriously, I start thinking about presenting my session 4 months earlier than the event!  I work on my presentation day and night. I want to make sure that what I present is accurate and that I have experienced it firsthand. My wife and my daughter also contribute to my efforts. For us, TechEd is a family event, and the two of them feel equally responsible as well. They give up their family time so I can bring out the best content for the Community. Pinal, Shaivi and Nupur at TechEd India 2012 Guinea Pigs (My Experiment Victims) I do not rehearse my session, ever. However, I test my demo almost every single day till the last moment that I have to present it already. I sometimes go over the demo more than 2-3 times a day even though the event is more than a month away. I have two “guinea pigs”: 1) Nupur Dave and 2) Vinod Kumar. When I am at home, I present my demos to my wife Nupur. At times I feel that people often backup their demo, but in my case, I have backup demo presenters. In the office during lunch time, I present the demos to Vinod. I am sure he can walk my demos easily with eyes closed. Pinal and Vinod at TechEd India 2012 My Sessions I’ve been determined to present my sessions in a real and practical manner. I prefer to present the subject that I myself would be eager to attend to and sit through if I were an audience. Just keeping that principle in mind, I have created two sessions this year. SQL Server Misconception and Resolution Pinal and Vinod at TechEd India 2012 We believe all kinds of stuff – that the earth is flat, or that the forbidden fruit is apple, or that the big bang theory explains the origin of the universe, and so many other things. Just like these, we have plenty of misconceptions in SQL Server as well. I have had this dream of co-presenting a session with Vinod Kumar for the past 3 years. I have been asking him every year if we could present a session together, but we never got it to work out, until this year came. Fortunately, we got a chance to stand on the same stage and present a single subject.  I believe that Vinod Kumar and I have an excellent synergy when we are working together. We know each other’s strengths and weakness. We know when the other person will speak and when he will keep quiet. The reason behind this synergy is that we have worked on 2 Video Learning Courses (SQL Server Indexes and SQL Server Questions and Answers) and authored 1 book (SQL Server Questions and Answers) together. Crowd Outside Session Hall This session was inspired from the “Laurel and Hardy” show so we performed a role-playing of those famous characters. We had an excellent time at the stage and, for sure, the audience had a wonderful time, too. We had an extremely large audience for this session and had a great time interacting with them. Speed Up! – Parallel Processes and Unparalleled Performance Pinal Dave at TechEd India 2012 I wanted to approach this session at level 400 and I was very determined to do so. The biggest challenge I had was that this was a total of 60 minutes of session and the audience profile was very generic. I had to present at level 100 as well at 400. I worked hard to tune up these demos. I wanted to make sure that my messages would land perfectly to the minds of the attendees, and when they walk out of the session, they could use the knowledge I shared on their servers. After the session, I felt an extreme satisfaction as I received lots of positive feedback at the event. At one point, so many people rushed towards me that I was a bit scared that the stage might break and someone would get injured. Fortunately, nothing like that happened and I was able to shake hands with everybody. Pinal Dave at TechEd India 2012 Crowd rushing to Pinal at TechEd India 2012 Networking This is one of the primary reasons many of us visit the annual TechEd event. I had a fantastic time meeting SQL Server enthusiasts. Well, it was a terrific time meeting old friends, user group members, MVPs and SQL Enthusiasts. I have taken many photographs with lots of people, but I have received a very few back. If you are reading this blog and have a photo of us at the event, would you please send it to me so I could keep it in my memory lane? SQL Track Speaker: Jacob and Pinal at TechEd India 2012 SQL Community: Pinal, Tejas, Nakul, Jacob, Balmukund, Manas, Sudeepta, Sahal at TechEd India 2012 Star Speakers: Amit and Balmukund at TechEd India 2012 TechED Rockstars: Nakul, Tejas and Pinal at TechEd India 2012 I guess TechEd is a mix of family affair and culture for me! Hamara TechEd (Our TechEd) Please tell me which photo you like the most! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • Fun With the Chrome JavaScript Console and the Pluralsight Website

    - by Steve Michelotti
    Originally posted on: http://geekswithblogs.net/michelotti/archive/2013/07/24/fun-with-the-chrome-javascript-console-and-the-pluralsight-website.aspxI’m currently working on my third course for Pluralsight. Everyone already knows that Scott Allen is a “dominating force” for Pluralsight but I was curious how many courses other authors have published as well. The Pluralsight Authors page - http://pluralsight.com/training/Authors – shows all 146 authors and you can click on any author’s page to see how many (and which) courses they have authored. The problem is: I don’t want to have to click into 146 pages to get a count for each author. With this in mind, I figured I could write a little JavaScript using the Chrome JavaScript console to do some “detective work.” My first step was to figure out how the HTML was structured on this page so I could do some screen-scraping. Right-click the first author - “Inspect Element”. I can see there is a primary <div> with a class of “main” which contains all the authors. Each author is in an <h3> with an <a> tag containing their name and link to their page:     This web page already has jQuery loaded so I can use $ directly from the console. This allows me to just use jQuery to inspect items on the current page. Notice this is a multi-line command. In order to use multiple lines in the console you have to press SHIFT-ENTER to go to the next line:     Now I can see I’m extracting data just fine. At this point I want to follow each URL. Then I want to screen-scrape this next page to see how many courses each author has done. Let’s take a look at the author detail page:       I can see we have a table (with a css class of “course”) that contains rows for each course authored. This means I can get the number of courses pretty easily like this:     Now I can put this all together. Back on the authors page, I want to follow each URL, extract the returned HTML, and grab the count. In the code below, I simply use the jQuery $.get() method to get the author detail page and the “data” variable that is in the callback contains the HTML. A nice feature of jQuery is that I can simply put this HTML string inside of $() and I can use jQuery selectors directly on it in conjunction with the find() method:     Now I’m getting somewhere. I have every Pluralsight author and how many courses each one has authored. But that’s not quite what I’m after – what I want to see are the authors that have the MOST courses in the library. What I’d like to do is to put all of the data in an array and then sort that array descending by number of courses. I can add an item to the array after each author detail page is returned but the catch here is that I can’t perform the sort operation until ALL of the author detail pages have executed. The jQuery $.get() method is naturally an async method so I essentially have 146 async calls and I don’t want to perform my sort action until ALL have completed (side note: don’t run this script too many times or the Pluralsight servers might think your an evil hacker attempting a DoS attack and deny you). My C# brain wants to use a WaitHandle WaitAll() method here but this is JavaScript. I was able to do this by using the jQuery Deferred() object. I create a new deferred object for each request and push it onto a deferred array. After each request is complete, I signal completion by calling the resolve() method. Finally, I use a $.when.apply() method to execute my descending sort operation once all requests are complete. Here is my complete console command: 1: var authorList = [], 2: defList = []; 3: $(".main h3 a").each(function() { 4: var def = $.Deferred(); 5: defList.push(def); 6: var authorName = $(this).text(); 7: var authorUrl = $(this).attr('href'); 8: $.get(authorUrl, function(data) { 9: var courseCount = $(data).find("table.course tbody tr").length; 10: authorList.push({ name: authorName, numberOfCourses: courseCount }); 11: def.resolve(); 12: }); 13: }); 14: $.when.apply($, defList).then(function() { 15: console.log("*Everything* is complete"); 16: var sortedList = authorList.sort(function(obj1, obj2) { 17: return obj2.numberOfCourses - obj1.numberOfCourses; 18: }); 19: for (var i = 0; i < sortedList.length; i++) { 20: console.log(authorList[i]); 21: } 22: });   And here are the results:     WOW! John Sonmez has 44 courses!! And Matt Milner has 29! I guess Scott Allen isn’t the only “dominating force”. I would have assumed Scott Allen was #1 but he comes in as #3 in total course count (of course Scott has 11 courses in the Top 50, and 14 in the Top 100 which is incredible!). Given that I’m in the middle of producing only my third course, I better get to work!

    Read the article

  • Adding a DLL to the GAC in Windows 7

    - by Jim Giercyk
    I recently created a DLL and I wanted to reference it from a project I was developing in Visual Studio.  In previous versions of Windows, doing so was simply a matter of dropping the DLL file in the C:\Windows\assembly folder.  That would add the DLL to the Global Assembly Cache (GAC) and make it accessible in Visual Studio.  However, as is often the case, Window 7 is different.  Even if you have Administrator privileges on your machine, you still do not have permission to drop a file in the assembly folder.  Undaunted, I thought about using the old DOS command line utility gacutil.exe.  Microsoft developed the tool as part of the .Net framework, and it is available in the Windows SDK Framework Tools.  If you have never used gacutil.exe before, you can find out everything you ever wanted to know but were afraid to ask here: http://msdn.microsoft.com/en-us/library/ex0ss12c(v=vs.80).aspx .  Unfortunately, if you do not have the Windows SDK loaded on your development machine, you will need to install it to use gacutil, but it is relatively quick and painless, and the framework tools are very useful.  Look here for your latest SDK: http://www.microsoft.com/download/en/search.aspx?q=Windows%20SDK .   After installing the SDK, I tried installing my DLL to the GAC by running gacutil from a DOS command line: That’s odd.  Microsoft is shipping a tool that cannot be executed even with Administrator rights?  Let me stop here and say that I am by no means a Windows security expert, so I actually did contact my system administrators, and they were not sure how to fix the problem….there must be a super administrator access level, but it isn’t available to your average developer in my company.  The solution outlined here is working within the boundaries of a normal windows Administrator. So, now the hacker in me bubbles to the surface.  What if I were to create a simple BAT file containing the gacutil command?  It’s so crazy it just might work!  Ugh!  I was starting to think this would never work, but then I realized that simply executing a batch program did not change my level of access.  Typically in Windows 7, you would select the “Run As Administrator” option to temporarily act as an administrator for the purpose of executing a process.  However, that option is not available for BAT files run from the command line.  SOLUTION: Create a desktop shortcut to execute the BAT file, which in turn will execute the line command…..are you still with me?  I created a shortcut and pointed it to my batch file.  Theoretically, all I need to do now is right-click on the shortcut and select “Run As Administrator” and we’re good, right?  Well, kinda.  If you notice the syntax of my BAT file, the name of the DLL is passed in as a parameter.  Therefore, I either have to hard-code the file name in the BAT program (YUCK!!), or I can leave the parameter and drag the DLL file to the shortcut and drop it.  Sweet, drag-and-drop works for me…..but if I use the drag-and-drop method, there is no way for me to right-click and select “Run As Administrator”.  That is not a problem…..I simply have to adjust the properties of the shortcut I created and I am in business.  I Right-clicked on the shortcut and select “Properties”.  Under the “Shortcut” tab there is an “Advanced” button…..I clicked it. All I needed to do was check the “Run As Administrator” box: In summary, what I have done is create a BAT file to execute a command line utility, gacutil.exe.  Then, rather than executing the BAT file from the command line, I created a desktop shortcut to run it and set the shortcut properties to “Run As Administrator”.  This will effectively mean I am executing the command line utility with Administrator privileges.  Pretty sneaky. Now, when I drag the DLL file  over to the shortcut, it starts the BAT file and adds the DLL to the assembly cache.  I created another BAT file to remove a DLL from the GAC in case the need should arise.  The code for that is: Give it a try.  I can’t imagine why updating the GAC has been made into such a chore in Windows 7.  Hopefully there is a service pack in the works that will give developers the functionality they had in Windows XP, but in the meantime, this workaround is extremely useful.

    Read the article

  • My Red Gate Experience

    - by Colin Rothwell
    I’m Colin, and I’ve been an intern working with Mike in publishing on Simple-Talk and SQLServerCentral for the past ten weeks. I’ve mostly been working “behind the scenes”, making improvements to the spam filtering, along with various other small tweaks. When I arrived at Red Gate, one of the first things Mike asked me was what I wanted to get out of the internship. It wasn’t a question I’d given a great deal of thought to, but my immediate response was the same as almost anybody: to support my growing family. Well, ok, not quite that, but money was certainly a motivator, along with simply making sure that I didn’t get bored over the summer. Three months is a long time to fill, and many of my friends end up getting bored, or worse, knitting obsessively. With the arrogance which seems fairly common among Cambridge people, I wasn’t expecting to really learn much here! In my mind, the part of the year where I am at Uni is the part where I learn things, whilst Red Gate would be an opportunity to apply what I’d learnt. Thankfully, the opposite is true: I’ve learnt a lot during my time here, and there has been a definite positive impact on the way I write code. The first thing I’ve really learnt is that test-driven development is, in general, a sensible way of working. Before coming, I didn’t really get it: how could you test something you hadn’t yet written? It didn’t make sense! My problem was seeing a test as having to test all the behaviour of a given function. Writing tests which test the bare minimum possible and building them up is a really good way of crystallising the direction the code needs to grow in, and ensures you never attempt to write too much code at time. One really good experience of this was early on in my internship when Mike and I were working on the query used to list active authors: I’d written something which I thought would do the trick, but by starting again using TDD we grew something which revealed that there were several subtle mistakes in the query I’d written. I’ve also been awakened to the value of pair programming. Whilst I could sort of see the point before coming, I also thought that it was impossible that two people would ever get more done at the same computer than if they were working separately. I still think that this is true for projects with pieces that developers can easily work on independently, and with developers who both know the codebase, but I’ve found that pair programming can be really good for learning a code base, and for building up small projects to the point where you can start working on separate components, as well as solving particularly difficult problems. Later on in my internship, for my down tools week project, I was working on adding Python support to Glimpse. Another intern and I we pair programmed the entire project, using ping pong pair programming as much as possible. One bonus that this brought which I wasn’t expecting was that I found myself less prone to distraction: with someone else peering over my shoulder, I didn’t have the ever-present temptation to open gmail, or facebook, or yammer, or twitter, or hacker news, or reddit, and so on, and so forth. I’m quite proud of this project: I think it’s some of the best code I’ve written. I’ve also been really won over to the value of descriptive variables names. In my pre-Red Gate life, as a lone-ranger style cowboy programmer, I’d developed a tendency towards laziness in variable names, sometimes abbreviating or, worse, using acronyms. I’ve swiftly realised that this is a bad idea when working with a team: saving a few key strokes is inevitably not worth it when it comes to reading code again in the future. Longer names also mean you can do away with a majority of comments. I appreciate that if you’ve come up with an O(n*log n) algorithm for something which seemed O(n^2), you probably want to explain how it works, but explaining what a variable name means is a big no no: it’s so very easy to change the behaviour of the code, whilst forgetting about the comments. Whilst at Red Gate, I took the opportunity to attend a code retreat, which really helped me to solidify all the things I’d learnt. To be completely free of any existing code base really lets you focus on best practises and think about how you write code. If you get a chance to go on a similar event, I’d highly recommend it! Cycling to Red Gate, I’ve also become much better at fitting inner tubes: if you’re struggling to get the tube out, or re-fit the tire, letting a bit of air out usually helps. I’ve also become quite a bit better at foosball and will miss having a foosball table! I’d like to finish off by saying thank you to everyone at Red Gate for having me. I’ve really enjoyed working with, and learning from, the team that brings you this web site. If you meet any of them, buy them a drink!

    Read the article

  • "Yes, but that's niche."

    - by Geertjan
    JavaOne 2012 has come to an end though it feels like it hasn't even started yet! What happened, time is a weird thing. Too many things to report on. James Gosling's appearance at the JavaOne community keynote was seen, by everyone (which is quite a lot) of people I talked to, as the highlight of the conference. It was interesting that the software for the Duke's Choice Award winning Liquid Robotics that James Gosling is now part of and came to talk about is a Swing application that uses the WorldWind libraries. It was also interesting that James Gosling pointed out to the conference: "There are things you can't do using HTML." That brings me to the wonderful counter argument to the above, which I spend my time running into a lot: "Yes, but that's niche." It's a killer argument, i.e., it kills all discussions completely in one fell swoop. Kind of when you're talking about someone and then this sentence drops into the conversation: "Yes, but she's got cancer now." Here's one implementation of "Yes, but that's niche": Person A: All applications are moving to the web, tablet, and mobile phone. That's especially true now with HTML5, which is going to wipe away everything everywhere and all applications are going to be browser based. Person B: What about air traffic control applications? Will they run on mobile phones too? And do you see defence applications running in a browser? Don't you agree that there are multiple scenarios imaginable where the Java desktop is the optimal platform for running applications? Person A: Yes, but that's niche. Here's another implementation, though it contradicts the above [despite often being used by the same people], since JavaFX is a Java desktop technology: Person A: Swing is dead. Everyone is going to be using purely JavaFX and nothing else. Person B: Does JavaFX have a docking framework and a module system? Does it have a plugin system?  These are some of the absolutely basic requirements of Java desktop software once you get to high end systems, e.g., banks, defence force, oil/gas services. Those kinds of applications need a web browser and so they love the JavaFX WebView component and they also love the animated JavaFX charting components. But they need so much more than that, i.e., an application framework. Aren't there requirements that JavaFX isn't meeting since it is a UI toolkit, just like Swing is a UI toolkit, and what they have in common is their lack, i.e., natively, of any kind of application framework? Don't people need more than a single window and a monolithic application structure? Person A: Yes, but that's niche. In other words, anything that doesn't fit within the currently dominant philosophy is "niche", for no other reason than that it doesn't fit within the currently dominant philosophy... regardless of the actual needs of real developers. Saying "Yes, but that's niche", kills the discussion completely, because it relegates one side of the conversation to the arcane and irrelevant corners of the universe. You're kind of like Cobol now, as soon as "Yes, but that's niche" is said. What's worst about "Yes, but that's niche" is that it doesn't enter into any discussion about user requirements, i.e., there's so few that need this particular solution that we don't even need to talk about them anymore. Note, of course, that I'm not referring specifically or generically to anyone or anything in particular. Just picking up from conversations I've picked up on as I was scurrying around the Hilton's corridors while looking for the location of my next presentation over the past few days. It does, however, mean that there were people thinking "Yes, but that's niche" while listening to James Gosling pointing out that HTML is not the be-all and end-all of absolutely everything. And so this all leaves me wondering: How many applications must be part of a niche for the niche to no longer be a niche? And what if there are multiple small niches that have the same requirements? Don't all those small niches together form a larger whole, one that should be taken seriously, i.e., a whole that is not a niche?

    Read the article

  • Specs, Form and Function – What am I Missing?

    - by Barry Shulam
    0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

    Read the article

  • How Can I Safely Destroy Sensitive Data CDs/DVDs?

    - by Jason Fitzpatrick
    You have a pile of DVDs with sensitive information on them and you need to safely and effectively dispose of them so no data recovery is possible. What’s the most safe and efficient way to get the job done? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader HaLaBi wants to know how he can safely destroy CDs and DVDs with personal data on them: I have old CDs/DVDs which have some backups, these backups have some work and personal files. I always had problems when I needed to physically destroy them to make sure no one will reuse them. Breaking them is dangerous, pieces could fly fast and may cause harm. Scratching them badly is what I always do but it takes long time and I managed to read some of the data in the scratched CDs/DVDs. What’s the way to physically destroy a CD/DVD safely? How should he approach the problem? The Answer SuperUser contributor Journeyman Geek offers a practical solution coupled with a slightly mad-scientist solution: The proper way is to get yourself a shredder that also handles cds – look online for cd shredders. This is the right option if you end up doing this routinely. I don’t do this very often – For small scale destruction I favour a pair of tin snips – they have enough force to cut through a cd, yet are blunt enough to cause small cracks along the sheer line. Kitchen shears with one serrated side work well too. You want to damage the data layer along with shearing along the plastic, and these work magnificently. Do it in a bag, cause this generates sparkly bits. There’s also the fun, and probably dangerous way – find yourself an old microwave, and microwave them. I would suggest doing this in a well ventilated area of course, and not using your mother’s good microwave. There’s a lot of videos of this on YouTube – such as this (who’s done this in a kitchen… and using his mom’s microwave). This results in a very much destroyed cd in every respect. If I was an evil hacker mastermind, this is what I’d do. The other options are better for the rest of us. Another contributor, Keltari, notes that the only safe (and DoD approved) way to dispose of data is total destruction: The answer by Journeyman Geek is good enough for almost everything. But oddly, that common phrase “Good enough for government work” does not apply – depending on which part of the government. It is technically possible to recover data from shredded/broken/etc CDs and DVDs. If you have a microscope handy, put the disc in it and you can see the pits. The disc can be reassembled and the data can be reconstructed — minus the data that was physically destroyed. So why not just pulverize the disc into dust? Or burn it to a crisp? While technically, that would completely eliminate the data, it leaves no record of the disc having existed. And in some places, like DoD and other secure facilities, the data needs to be destroyed, but the disc needs to exist. If there is a security audit, the disc can be pulled to show it has been destroyed. So how can a disc exist, yet be destroyed? Well, the most common method is grinding the disc down to destroy the data, yet keep the label surface of the disc intact. Basically, it’s no different than using sandpaper on the writable side, till the data is gone. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • With Its MySQL Database-as-a-Service CERN Empowers Scientists

    - by Bertrand Matthelié
    The European Organization for Nuclear Research (CERN) is one of the world’s largest and most respected centers for scientific research. Founded in 1954 and located near Geneva on the Franco-Swiss border, CERN was one of Europe’s first joint ventures. Today, it has 20 member states. The organization uses the world’s largest and most complex scientific instruments to study fundamental particles and the origin of the universe. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Challenges Better support the scientists associated with a CERN research program who selected MySQL as their database. Empower users, enabling them to be as self-reliant as possible. Minimize complexity and costs for the CERN IT department to support the growing number of MySQL deployments. Solution Delivered a MySQL Database-as-a-Service offering to the CERN employees and the scientists associated with the organization. Allowed researchers selecting MySQL for their project to get access to a database instance hosted by the CERN IT department, either from the start or once their application has become critical. Implemented the service using Oracle’s server virtualization software, Oracle VM, for increased flexibility and reduced costs. Empowered users with a self-service approach, providing them with tools to manage MySQL themselves while handling backups and other basic database administration tasks for them. Enabled scientists to rely on MySQL with increased reliability, security and manageability while reducing complexity and minimizing costs. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} "The Cloud model has allowed us to deliver a self-service platform to our MySQL users, empowering them while minimizing costs for CERN." Tony Cass, Database Services Group Leader, IT department, CERN.

    Read the article

  • Are there Negative Impact of opensource on commercial environment?

    - by Lostsoul
    I know this is not a good fit for Stack Overflow but wasn't sure if it was good for this site also so let me know if its not and I'll delete it. I love programming for fun but my role in my company is not technical. I have always loved the hacker culture and have been trying to drive that openness within my company from day one. My company has a very broad range of products and there are a few that are not strategic to us so I wanted to open source them (so we can focus on what makes us unique and open source the products that every firm has). Our industry does not open source(we would be the first firm to try this) and the feedback I'm getting from my management team is either 1) we'll destroy the industry or 2) all competitive commercial firms will unite against us and we'll be wiped out either way. I disagreed on both points because I think transparency will only grow our industry and our firm (think of McDonalds/KFC sharing their recipe openly, people may copy you, competitors may target you, but customers also may feel more comfortable buying your product. The value add, I believe, is in the delivery and experience not in hoarding the recipe). It's a big battle in my firm right now between the IT people who have seen the positive effects of sharing and the business people who think we'll be giving up everything (they prefer we sell parts we want to opensource, but in their defense this is standard when divesting something). Our industry is very secretive and I don't want to put anyone(even my competitors employees) out of a job yet I don't want to protect inefficient people by not being open with everyone. Yet I've seen so many amazing technologies created in interesting ways just by giving people freedom to take apart code and put it back together. I'm interested in hearing people's thoughts(doesn't have to be to my specific situation, I'm looking for the general lessons). Its a very stressful decision(but one I feel I must make) because if we go the open source route then there will be no going back. So what are your thoughts? Does open sourcing apply generally or is it only really applicable to software? Is it overall good for people in the industry and outside? I'm actually more interested in the negativeness effects(although positive are welcomed as well) Update: Long story short, although code is involved this is not so much about code as it is more about the idea of open sourcing. We are a mid sized quant hedge fund. We have some unique strategies but also have the standard long/short, arbitrage, global macro, etc.. funds. We are keeping the unique funds we have but the other stuff that everyone else has we are considering open sourcing (We have put in years of work & millions of dollars into. Our funds is pretty popular and our performance is either in first or second quartile so I suspect there will be interest but I don't know to what extent). The goal is not to get a community to work for us or anything, the goal is to let anyone who wants to tinker with it do so and create anything they want (it will not be part of our product line although I may unofficially allocate some our of staff's time to assist any community that grows). Although the code base is quite large, the value in this is the industry knowledge and approaches we have acquired (there are many books on artificial intelligence and quant trading but they are often years behind what's really going on as most firms forbid their staff from discussing what they are doing). We are also considering after we move our clients out to let the software still run and output the resulting portfolios for free as well so people can at least see the results(as long as we have avail. infrastructure). I think our main choices are, we can continue to fight for market share in a products that are becoming commoditized, we can shut the funds/products down(and keep the code but no one outside of our firm will ever learn from it) or we can open source it and let people do what they want. By open sourcing it, my idea is that the talent pool in the industry will grow because right now most of our hires have the same background (CFA, MBA, similar school, same experience,etc.. because we can't spend time training people so the industry 'standardizes' most people and thus the firms themselves start to look/act similar) but this may allow us to identify talent that has never been in the industry before (if we put a GPU license then as people learn from what we did, we can learn from what they do as well and maybe apply it to other areas of our firm). I see a lot of benefits but not many negatives while my peers at the company see the opposite.

    Read the article

  • WpfToolkit DataGrid does not work in Windows Phone 7

    - by Igor Zevaka
    I am trying to use WpfToolkit DataGrid in Windows Phone 7 project (Silverligt 4) and it's not working. Here is the XAML: <UserControl x:Class="SilverlightControls.Grid" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:wtk="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" d:DesignHeight="480" d:DesignWidth="480"> <Grid x:Name="LayoutRoot" Background="#FF1F1F1F" Width="960"> <Grid x:Name="TitleGrid"> <TextBlock Text="{Binding Title}" Style="{StaticResource PhoneTextPageTitle2Style}"/> </Grid> <wtk:DataGrid> </wtk:DataGrid> </Grid> </UserControl> The project compiles fine but crashes at runtime trying to load this control. The best clue I got so far is from Visual Studio Designer. Once I add wtk:DataGrid to the control the visual designer does not load and below is the exception it displays. Could it be that WpfToolkit relies on PresentationFramework.dll and it's not available in SL4? System.Reflection.Adds.UnresolvedAssemblyException Type universe cannot resolve assembly: PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35. at System.Reflection.Adds.AssemblyProxy.GetResolvedAssembly() at System.Reflection.Adds.AssemblyProxy.get_FullName() at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.PrepareAttributes(Reflectable`1 reflectableAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.PrepareAttributes(Reflectable`1 reflectableType) at MS.Internal.Metadata.ClrType.GetAttributes[T](ReflectionMetadataContext context, IReflectable`1 member, ITypeMetadata attributeType, Boolean merge, AttributeMergeCache& cache) at MS.Internal.Metadata.ClrMember`1.GetLocalAttributes(ITypeMetadata attributeType) at MS.Internal.Design.Metadata.Xaml.XamlType.GetSpecialProperty(Int32 idx, PropertyIdentifier pid) at MS.Internal.Design.Metadata.Xaml.XamlType.get_ContentProperty() at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensionImplementations.GetContentProperty(ITypeMetadata sourceType) at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensions.GetContentProperty(ITypeMetadata source) at MS.Internal.Design.Metadata.ReflectionTypeNode.get_ContentProperty() at MS.Internal.Design.Markup.XmlElement.CalcChildWhitespaceImportant(XamlElement element) at MS.Internal.Design.Markup.XmlElement.ConvertChildrenToXaml(XamlElement result, PrefixScope scope, IParseContext context, IMarkupSourceProvider provider, Boolean childrenAsString) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.Markup.XmlElement.ConvertChildrenToXaml(XamlElement result, PrefixScope scope, IParseContext context, IMarkupSourceProvider provider, Boolean childrenAsString) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.ParseElementFromSkeleton(XamlParseContext context, SkeletonNode node, XamlElement parent, Boolean fullElement) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.UpdateSkeleton(IDamageListener listener) at Microsoft.Windows.Design.DocumentModel.Trees.MarkupDocumentTreeManager.Update() at Microsoft.Windows.Design.DocumentModel.MarkupProducer.Update() at Microsoft.Windows.Design.DocumentModel.MarkupProducer.HandleMessage(DocumentTreeCoordinator sender, MessageKey key, MessageArguments args) at Microsoft.Windows.Design.DocumentModel.MarkupProducer.Microsoft.Windows.Design.DocumentModel.IDocumentTreeConsumer.HandleMessage(DocumentTreeCoordinator sender, MessageKey key, MessageArguments args) at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.SendMessage[T](MessageKey`1 key, T args, Boolean isPrivateMessage) at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.QueuedMessage`1.Microsoft.Windows.Design.DocumentModel.IQueuedMessage.Invoke() at Microsoft.Windows.Design.DocumentModel.DocumentTreeCoordinator.ProcessQueuedMessages(Object state) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)

    Read the article

  • Hidden Features of PHP?

    - by George Mauer
    EDIT: This didn't really start as a hidden features of PHP topic, but thats what it ended up as, so go nuts. I know this sounds like a point-whoring question but let me explain where I'm coming from. Out of college I got a job at a PHP shop. I worked there for a year and a half and thought that I had learned all there was to learn about programming. Then I got a job as a one-man internal development shop at a sizable corporation where all the work was in C#. In my commitment to the position I started reading a ton of blogs and books and quickly realized how wrong I was to think I knew everything. I learned about unit testing, dependency injection and decorator patterns, the design principle of loose coupling, the composition over inheritance debate, and so on and on and on - I am still very much absorbing it all. Needless to say my programming style has changed entirely in the last year. Now I find myself picking up a php project doing some coding for a friend's start-up and I feel completely constrained as opposed to programming in C#. It really bothers me that all variables at a class scope have to be referred to by appending '$this-' . It annoys me that none of the IDEs that I've tried have very good intellisense and that my SimpleTest unit tests methods have to start with the word 'test'. It drives me crazy that dynamic typing keeps me from specifying implicitly which parameter type a method expects, and that you have to write a switch statement to do method overloads. I can't stand that you can't have nested namespaces and have to use the :: operator to call the base class's constructor. Now I have no intention of starting a PHP vs C# debate, rather what I mean to say is that I'm sure there are some PHP features that I either don't know about or know about yet fail to use properly. I am set in my C# universe and having trouble seeing outside the glass bowl. So I'm asking, what are your favorite features of PHP? What are things you can do in it that you can't or are more difficult in the .Net languages?

    Read the article

  • A shortest path problem with superheroes and intergalactic journeys

    - by Dman
    You are a super-hero in the year 2222 and you are faced with this great challenge: starting from your home planet Ilop you must try to reach Acinhet or else your planet will be destroyed by evil green little monsters. To do this you are given a map of the universe: there are N planets and M inter-planetary connections ( bidirectional ) that bind these planets. Each connection requires a certain time and a certain amount of fuel in order for you to cover the connection from one planet to another. The total time spent going from one planet to another is obtained by multiplying the time past to cover each connection between all the planets you go through. There are some "key planets", that allow you to refuel if you arrive on those certain "key planets". A "key planet" is the planet with the property that if it disappears the road between at least two planets would be lost.(In the example posted below with the input/output files such a "key planet" is 2 because without it the road to 7 would be lost) When you start your mission you are given the possibility of choosing between K ships each with its own maximum fuel capacity. The goal is to find the SHORTEST TIME CONSUMING path but also choose the ship with the minimum fuel capacity that can cover that shortest path(this means that if more ships can cover the shortest path you choose the one with the minimum fuel capacity). Because the minimum time can be a rather large number (over long long int) you are asked to provide only the last 6 digits of the number. For a better understanding of the task, here is an example of input/output files: INPUT: mission.in 7 8 6 1 4 6 5 9 8 7 10 1 2 7 8 1 4 14 9 1 5 3 1 2 3 1 2 2 7 7 1 3 4 2 2 4 6 4 1 5 6 3 7 On the first line (in order): N M K On the second line :the number for the starting planet and the finishing planet On the third line :K numbers that represent the capacities of the ships you can choose from Then you have M lines, all of them have the same structure: Xi Yi Ti Fi-which means that there is a connection between Xi and Yi and you can cover the distance from Xi to Yi in Ti time and with a Fi fuel consumption. OUTPUT:mission.out 000014 8 1 2 3 4 On the first line:the minimum time and fuel consumption; On the second line :the path Restrictions: 2 = N = 1 000 1 = M = 30 000 1 = K = 10 000 Any suggestions or ideas of how this problem might be solved would be most welcomed.

    Read the article

  • unable to install anything on ubuntu 9.10 with aptitude

    - by Srisa
    Hello, Earlier i could install software by using the 'sudo aptitude install ' command. Today when i tried to install rkhunter i am getting errors. It is not just rkhunter, i am not able to install anything. Here is the text output: user@server:~$ sudo aptitude install rkhunter ................ ................ 20% [3 rkhunter 947/271kB 0%] Get:4 http://archive.ubuntu.com karmic/universe unhide 20080519-4 [832kB] 40% [4 unhide 2955/832kB 0%] 100% [Working] Fetched 1394kB in 1s (825kB/s) Preconfiguring packages ... Selecting previously deselected package lsof. (Reading database ... ................ (Reading database ... 95% (Reading database ... 100% (Reading database ... 20076 files and directories currently installed.) Unpacking lsof (from .../lsof_4.81.dfsg.1-1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb (--unpack): unable to create `/usr/bin/lsof.dpkg-new' (while processing `./usr/bin/lsof'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package libmd5-perl. Unpacking libmd5-perl (from .../libmd5-perl_2.03-1_all.deb) ... Selecting previously deselected package rkhunter. Unpacking rkhunter (from .../rkhunter_1.3.4-5_all.deb) ... dpkg: error processing /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb (--unpack): unable to create `/usr/bin/rkhunter.dpkg-new' (while processing `./usr/bin/rkhunter'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Selecting previously deselected package unhide. Unpacking unhide (from .../unhide_20080519-4_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/unhide_20080519-4_amd64.deb (--unpack): unable to create `/usr/sbin/unhide-posix.dpkg-new' (while processing `./usr/sbin/unhide-posix'): Permission denied dpkg-deb: subprocess paste killed by signal (Broken pipe) Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/lsof_4.81.dfsg.1-1_amd64.deb /var/cache/apt/archives/rkhunter_1.3.4-5_all.deb /var/cache/apt/archives/unhide_20080519-4_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up libmd5-perl (2.03-1) ... Building dependency tree... 0% Building dependency tree... 50% Building dependency tree... 50% Building dependency tree Reading state information... 0% ........... .................... I have removed some lines to reduce the text. All the error messages are in here though. My experience with linux is limited and i am not sure what the problem is or how it is to be resolved. Thanks.

    Read the article

< Previous Page | 20 21 22 23 24 25 26  | Next Page >