Search Results

Search found 44090 results on 1764 pages for 'working conditions'.

Page 24/1764 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• Yoga Pro 2 Wi-Fi not working

  - by user293004

  I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

  Read the article

• Working with fubar/refuctored code

  - by Keyo

  I'm working with some code which was written by a contractor who left a year ago leaving a number of projects with buggy, disgustingly bad code. This is what I call cowboy PHP, say no more. Ideally I'd like to leave the project as is and never touch it again. Things break, requirements change and it needs to be maintained. Part A needs to be changed. There is a bug I cannot reproduce. Part A is connect to parts B D and E. This kind of work gives me a headache and makes me die a little inside. It kills my motivation and productivity. To be honest I'd say it's affecting my mental health. Perhaps being at the start of my career I'm being naive to think production code should be reasonably clean. I would like to hear from anyone else who has been in this situation before. What did you do to get out of it? I'm thinking long term I might have to find another job. Edit I've moved on from this company now, to a place where idiots are not employed. The code isn't perfect but it's at least manageable and peer reviewed. There are a lot of people in the comments below telling me that software is messy like this. Sure I don't agree with the way some programmers do things but this code was seriously mangled. The guy who wrote it tried to reinvent every wheel he could, and badly. He stopped getting work from us because of his bad code that nobody on the team could stand. If it were easy to refactor I would have. Eventually after many 'just do this small 10minute change' situations had ballooned into hours of lost time (regardless of who on the team was doing the work) my boss finally caved in it was rewritten.

  Read the article

• Working with a company as a Junior Developer [closed]

  - by user1601973

  We all have started our careers in some way or other. Well, I am a college student based in North America & I am doing my second internship with the same company with which I did my first internship. I came back here because people here were helpful always and supportive. But it just happened today, and I wanted to share this on SO. Well since I started I have been doing documentation and that kind of stuff only as compared to my first internship in which I actually worked along with the developers & learned so many things. Well, I was in a conversation with my Team lead, and he asked me if I completed that particular work or not? Well, That particular work had slipped from my mind. He was indeed I kind of pissed, and said "You don't have to worry about it, I will figure out". Well, I felt so bad and was about to literally cry. I stopped my lunch and then went on to complete that work. I always ask for work in office, and I always try to be an asset for whoever I am working but this was the first time that it happened. What are your thoughts on this and should I apologise or not? I think I should.

  Read the article

• Trendnet tew-424ub wireless not working after update 12.10

  - by dwa

  I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Click buttons on the mouse stopped working in 12.10

  - by Kushal

  everything was great for a couple weeks after the upgrade, and then all of a sudden, the click buttons on my trackpad (as well as any other USB mouse I would hook up) stopped working. The pointer moves fine, but the clicks don't work. Sometimes the left click doesn't work but right click does, and then some times, neither works. I noticed this would begin when I would accidentally drag some text in a web browser (you know how when you try to move your pointer through the trackpad, but you accidentally tap down and it starts to drag whatever text you've selected on the window), and then you're done. The clicks won't work after that. They would work upon rebooting or logging off and back on, but then after a few minutes of usage, things would go back to being broken again. It happened a LOT when I was trying to play Scrabble on Facebook. I've raised a bug for this, but I haven't heard back anything on it. Here's the bug report: https://bugs.launchpad.net/bugs/1077805 Since the system was unusable this way, I had to remove it and install another OS based on 12.04. Has anyone else faced this issue or does someone know what to do to fix it? I'd go back to vanilla Ubuntu in a heartbeat if this issue can be fixed.

  Read the article

• Select (loop) or command not working in shell-script

  - by user208098

  I've been tinkering with Linux and Unix for years but still a novice in my mind and recently find myself trying to be more pro with it as I work in IT. So with that notion I'm studying shell scripting. I've hit a snag in ubuntu using the latest version 13.10 Saucy. When I use the select command in a sh script it doesn't work, depending on how I format the command it will either return Unexpected "do" or Unexpected "done". See the following two examples: This section of code produces an unexpected "do" error: #/bin/bash PS3='Please enter your choice' select opt in option1 option2 option3 quit do case $opt in "option1") echo "you chose choice 1" ;; "option2") echo "you chose choice 2" ;; "option3") echo "you chose choice 3" ;; "quit") break ;; *) echo invalid option ;; esac done This section of code produces an unexpected "done" error. #/bin/bash PS3='Please enter your choice' select opt in option1 option2 option3 quit ; do case $opt in "Option1") echo "you chose choice 1" ;; "Option2") echo "you chose choice 2" ;; "Option3") echo "you chose choice 3" ;; "quit") break ;; *) echo invalid option ;; esac done When I enter these parameters into the command line interactively or manually I get the desired result which is a list of choices to choose from. However when executed from a script I get the before mentioned errors. Also a side note I have tried this in Fedora as a script and it worked perfectly so my question is why isn't it working in Ubuntu, is this a difference between RHL and Debian? Or is it a bug in the latest version of Ubuntu? Thanks in advance for any help! KG

  Read the article

• Touchpad stops working after desktop shows up

  - by gsedej

  Hi! I have problem with touch-pad. It is not working correctly. It goes like this. When laptop is booting, right after desktop shows, I can move mouse with touch-pad for a second, but when icons shows up, touch-pad does not want to move cursor at all. Even buttons stops work. The same problem with Ubuntu 10.04 and Ubuntu 10.10 I can see "Touchpad" tab in "Mouse" menu, and I can even set "two finger scrolling". I checked in gconf-editor under "desktop-gnome-pheriferals-touchpad" and it's enabled. Furthermore I checked xinput and it is as it should be: SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]. I tried to create new master reattach but still nothing... EDIT: Laptop has fn + F7 to control touch-pad. Ubuntu shows bobble showing touchpad OFF and touchpad ON. But it does nothing. No matter if it say ON, it still does not work.

  Read the article

• GRUB2 not working after installing xubuntu 14.04

  - by h3bm

  I have a vaio laptop and it used to have installed windows 8 and Xubuntu 13.04 in dual boot, everything was working fine. I decided to update my version of xubuntu 14.04 LTS mainly because the support for 13.04 is finished and LTS version have 3 years of support. What I did was to format the partition where xubuntu 13.04 was installed and install 14.04 in that formated partition. When I restarted my computer willing to start using my new system I got the following message: error: symbol 'grub_term_highlight_color' not found and I was not able to enter any OS. I tried boot-repair from live USB more than two times and it did not fix the problem. I tried to enter to my computer using super GRUB2 disk, however it does not apperar to work with UEFI active (besides super grub2 disk says it can) I only get the message "no operating system found". If I boot super grub2 disk with UEFI disabled, super grub2 disk can not detect any OS,I also tried Rescatux distro, however, as of super grub2 disk, rescatux cannot enter when UEFI is active. I tried boot-repair with the option of "restore EFI backups", after that I was able to boot on windows, but no grub menu appeared. I ran boot-repair again with no improving results Here is the last Bootinfo report I got: http://paste.ubuntu.com/7609801/ Do you have any idea of what is happening? I really appreciate your help, Best regards,

  Read the article

• Electricsheep Not Working in Raring 13.04

  - by Nhoeh37

  I just downloaded Electricsheep four days before I updated my Ubuntu software and I fell in love with it. After I upgraded to 13.04, I'm kind of upset in saying that Electricsheep no longer works. I have no idea how to fix it and I feel helpless with Linux. As I said, it was working completely fine in 12.10, but now with the Raring Ringtail update: I use Xscreensaver to launch Electricsheep. When I open Xscreensaver, "Electricsheep" is one of the options to choose. When I "preview" ES or even launch the "xscreensaver-demo" in the terminal, it doesn't work anymore; I get an error message. The error message says: "detected another electric sheep process. rendering of sheep is disabled using read only access." Damnit, can someone please help me? I want my trippy screensaver back, it shouldn't be this hard! EDIT: I contacted the creator of Electricsheep (Scott Draves) via the link to his email address on his personal website and asked for his assistance. Hopefully the Askubuntu community will be able to fix this problem, I'm sure I am not the only one who is having this problem as I have searched and searched.

  Read the article

• Oracle Worldwide Product Translation Group and Applications User Experience Working Together

  - by ultan o'broin

  The Applications User Experience (UX) Mobile team has been extending its ethnographic research to even more countries. Recently, the team conducted research in Sweden, and I am pleased to say I made the connection for the UX team with the Oracle's Worldwide Translation Product Group (WPTG) local (that is, in-country) language specialists. It struck me that WPTG's local market knowledge and insight that we heard about at an Oracle Usability Advisory Board meeting in the UK in 2011 would be very valuable to the UX efforts while, at the same time, UX could afford WPTG an opportunity to understand our design and development direction so that linguistic resources (terminology, style guides, translatability guidelines, and so on) for any translation of our mobile solutions could be prepared in advance. Brent White of the Mobile UX team takes notes as ethnography participant Capri Norman uses mobile technology to work in Stockholm. Pic credit: Oracle Applications UX. The UX team acknowledges Capri's kind permission to use this image. I'm told by Brent White of the Mobile UX team that the co-operation was a big success.  A WPTG Swedish language specialist joined a couple of ethnographic sessions, taking great notes and turning them around very fast for the UX team. And of course, a great local insight into Swedish culture and ways of working was provided too, along with some nice socializing!  More research in more countries is planned. Watch out for future blog posts and other communications about this great co-operation worldwide.

  Read the article

• this.BoundingBox.Intersects(Wall[0].BoundingBox) not working properly

  - by Pieter

  I seem to be having this problem a lot, I'm still learning XNA / C# and well, trying to make a classic paddle and ball game. The problem I run into (and after debugging have no answer) is that everytime I run my game and press either of the movement keys, the Paddle won't move. Debugging shows that it never gets to the movement part, but I can't understand why not? Here's my code: // This is the If statement for checking Left movement. if (keyboardState.IsKeyDown(Keys.Left) || keyboardState.IsKeyDown(Keys.A)) { if (!CheckCollision(walls[0])) { Location.X -= Velocity; } } //This is the CheckCollision(Wall wall) boolean public bool CheckCollision(Wall wall) { if (this.BoundingBox.Intersects(wall.BoundingBox)) { return true; } return false; } As far as I can tell there should be absolutely no problem with this, I initialize the bounding box in the constructor whenever a new instance of Walls and Paddle is created. this.BoundingBox = new Rectangle(0, 0, Sprite.Width, Sprite.Height); Any idea as to why this isn't working? I have previously succeeded with using the whole Location.X < Wall.Location.X + Wall.Texture.Width code... But to me that seems like too much coding if a simple boolean check could be done.

  Read the article

• keyPressed is not working after adding ActionListener to JButton

  - by Yehonatan

  I have a serious problem while trying to build a menu for my game. I've added two JButton to a main JPanel and added an ActionListener for each of them. The main JPanel also contains the game JPanel which have the keyPressed method inside keyController. That's how it looks - Main -       JPanel -         JButton, JButton,         JPanel which contains the game and keyPressed function inside KeyController class which worked fine before I added the ActionListener for JButton. For some reason after I added an ActionListener for each of the button, the game JPanel is not getting any keyPreseed events nor KeyRealesed. Does anyone know the solution for my situation? Thank you very much! Main window - Scanner in = new Scanner(System.in); JFrame f = new JFrame("Square V.S Circles"); f.setUndecorated(true); f.setResizable(false); f.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE); f.add(new JPanelHandler()); f.pack(); f.setVisible(true); f.setLocationRelativeTo(null); JPanelHandler(main JPanel) - super.setFocusable(true); JButton mybutton = new JButton("Quit"); JButton sayhi = new JButton("Say hi"); sayhi.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { System.out.println("Hi"); } }); mybutton.addActionListener(new ActionListener() { @Override public void actionPerformed(ActionEvent e) { System.exit(0); } }); add(mybutton); add(sayhi); add(new Board(2)); Board KeyController(The code inside is working so it's unnecessary to put it here) - private class KeyController extends KeyAdapter { public KeyController() { ..Code } @Override public void keyPressed(KeyEvent e) { ...Code } @Override public void keyReleased(KeyEvent e){ ...Code } }

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• Laptop Display Not Working

  - by etrask

  Hello, I just purchased this laptop. It is working fine but I want to use Xubuntu on it. I managed to get 10.04 installed and running but it did not recognize/use the wireless card. So I want to try 10.10. However, every time I try, the screen goes black and never comes back on. I have tried the Live CD and Alternate install CDs, for both Ubuntu and Xubuntu 10.10. After I select "Install Ubuntu" or "Try Ubuntu", the screen blacks out and never displays anything. So I deleted "quiet" and "splash" off the command line to see what messages would come up. A bunch of text flies by but it ends at: [time] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [time] TCP bind hash table entries 65536 (order: 8, 1048576 bytes) [time] TCP: Hash tables configured (established 524288 bind 65536) [time] TCP reno registered [time] UDP hash table entries: 2048 (order: 4, 65536 bytes) [time] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [time] NET: Registered protocol family 1 And freezes here forever. I have tried nomodeset, vga=771, and xforcevesa with no progress. Is my video card simply not going to work with this distro? It seems strange that 10.04 would work fine but not 10.10. Any help is appreciated, thank you.

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• Mplayer not working after update

  - by R. Morgenstern

  After an update with update-manager in Unbuntu 12.04, Mplayer is not working anymore. It needs ffmpeg, but it can't be installed due to unmet dependencies. I added a ppa for fmpeg, but did not solve the problem. see output: Python (v2.7) requires to install .... GStreamer ffmpeg video plugin. Codecs to play mpeg, divx, mpeg4, ac3, wmv and asf files. Using Install, I get an error messages that it can't be installed due to unmet dependencies. see list below. How can I fix this problem? Thanks in advance for guidance. Renate The following packages have unmet dependencies: gstreamer0.10-ffmpeg: Depends: libavcodec-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavformat-extra-53 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libavutil-extra-51 (>= 4:0.7.3-1) but 6:0.10.4.0ubuntu0jon2.2 is to be installed Depends: libc6 (>= 2.7) but 2.15-0ubuntu10 is to be installed Depends: libglib2.0-0 (>= 2.31.2) but 2.32.3-0ubuntu1 is to be installed Depends: libgstreamer-plugins-base0.10-0 (>= 0.10.31) but 0.10.36-1 is to be installed Depends: libgstreamer0.10-0 (>= 0.10.31) but 0.10.36-1ubuntu1 is to be installed Depends: liborc-0.4-0 (>= 1:0.4.16) but 1:0.4.16-1ubuntu2 is to be installed Depends: libpostproc-extra-52 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed Depends: libswscale-extra-2 (>= 4:0.7.3-1) but 4:0.8.3ubuntu0.12.04.1 is to be installed

  Read the article

• Can't get wireless working after installing ubuntu 12.10 on acer aspire 5560-7414

  - by markdel

  I have been struggling all day trying different solutions from different posts on how to get my wifi working but none have worked. Any help would be greatly appreciated. Below are some wireless preferences to help find the problem. mark@mark-Aspire-5560:~$ sudo rfkill list all [sudo] password for mark: 0: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 1: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 10 serial: 20:6a:8a:7f:63:82 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=full firmware=sb ip=158.65.194.244 latency=0 link=yes multicast=yes port=twisted pair speed=10Mbit/s resources: irq:16 memory:f0000000-f000ffff memory:f0010000-f001ffff memory:f0050000-f00507ff *-network description: Wireless interface product: BCM43227 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth1 version: 00 serial: 08:ed:b9:01:e0:8b width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.112 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:f0100000-f0103fff

  Read the article

• Is my gedit-latex-plugin working properly?

  - by arroy_0209

  I have installed gedit-latex-plugin(0.2 rc3) to be used with gedit(2.30.3) in ubuntu 10.04. If I use the command gedit file.tex& in terminal the file is opened and it seems everything works fine but in the terminal, lots of comments appear, some of which are: 2012-03-31 22:14:27,263 DEBUG resources - Initializing resource locating 2012-03-31 22:14:27,361 DEBUG Preferences - not found 2012-03-31 22:14:27,373 DEBUG JobManager - Created JobManager instance 147209196 2012-03-31 22:14:27,379 DEBUG GeditLaTeXPlugin - activate 2012-03-31 22:14:27,379 DEBUG WindowContext - init 2012-03-31 22:14:27,444 DEBUG GeditWindowDecorator - _init_tab_decorators: initialized 0 decorators 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - active_tab_changed 2012-03-31 22:14:27,511 DEBUG GeditWindowDecorator - ---------- ADJUST: None 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - No window-scope views for this extension 2012-03-31 22:14:27,513 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:27,514 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 2012-03-31 22:14:27,539 DEBUG GeditWindowDecorator - tab_added 2012-03-31 22:14:27,952 DEBUG GeditTabDecorator - loaded 2012-03-31 22:14:27,964 DEBUG GeditTabDecorator - _adjust_editor: URI has changed 2012-03-31 22:14:27,965 DEBUG LaTeXCompletionHandler - init 2012-03-31 22:14:27,966 DEBUG LanguageModelFactory - Pickled object found: /home/abcd/.gnome2/gedit/plugins/GeditLaTeXPlugin/latex.pkl 2012-03-31 22:14:28,075 DEBUG CompletionDistributor - init 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view LaTeXOutlineView 2012-03-31 22:14:28,078 DEBUG WindowContext - Created view IssueView 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - init(file:///home/abcd/dir1/file1.tex) 2012-03-31 22:14:28,079 DEBUG LaTeXEditor - Parsing document... 2012-03-31 22:14:28,080 DEBUG IssueView - init 2012-03-31 22:14:28,082 DEBUG IssueView - init finished 2012-03-31 22:14:28,092 INFO LaTeXEditor - LaTeXParser.parse: 0.010000 2012-03-31 22:14:28,092 DEBUG LaTeXEditor - Parsed 1599 bytes of content 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - set_outline 2012-03-31 22:14:28,093 DEBUG LaTeXOutlineView - init 2012-03-31 22:14:28,097 DEBUG LaTeXValidator - validate 2012-03-31 22:14:28,098 DEBUG LanguageModel - set_newcommands: 2012-03-31 22:14:28,102 DEBUG LaTeXEditor - Parsing finished 2012-03-31 22:14:28,105 DEBUG GeditWindowDecorator - ---------- ADJUST: .tex 2012-03-31 22:14:28,119 DEBUG GeditWindowDecorator - _set_selected_bottom_view: 0 2012-03-31 22:14:28,120 DEBUG GeditWindowDecorator - _set_selected_side_view: 0 I am not sure if the gedit-latex-plugin is working properly or is it facing some problem. Why are there so many debug messages? Can anybody please suggest what I should do?

  Read the article

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• Password not working for sudo ("Authentication failure")

  - by Souta

  Before I mention anything further, DO NOT give me a response saying that terminal won't show password input. I'm AWARE of that. I'm typing my user password in (not a capslock issue), and for some reason it still says 'Authentication Failure'. Is there some other password (one I'm not aware of) I'm supposed to be using other than my user password? I've had this ubuntu before, on another hard drive and I didn't have this problem. (And it was the same ubuntu, ubuntu 12.04 LTS) ai@AiNekoYokai:~$ groups ai adm cdrom sudo dip plugdev lpadmin sambashare ai@AiNekoYokai:~$ lsb_release -rd Description: Ubuntu 12.04 LTS Release: 12.04 ai@AiNekoYokai:~$ pkexec cat /etc/sudoers # # This file MUST be edited with the 'visudo' command as root. # # Please consider adding local content in /etc/sudoers.d/ instead of # directly modifying this file. # # See the man page for details on how to write a sudoers file. # Defaults env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" # Host alias specification # User alias specification # Cmnd alias specification # User privilege specification root ALL=(ALL:ALL) ALL # Members of the admin group may gain root privileges %admin ALL=(ALL) ALL # Allow members of group sudo to execute any command %sudo ALL=(ALL:ALL) ALL # See sudoers(5) for more information on "#include" directives: #includedir /etc/sudoers.d I can log in with my password, but it's not accepted as valid for authentication <-- That is pretty much my issue. (Although, I haven't gone into recovery mode.) I've ran: ai@AiNekoYokai:~$ ls /etc/sudoers.d README And also reinstalled sudo with: pkexec apt-get update pkexec apt-get --purge --reinstall install sudo pkexec usermod -a -G admin $USER <- Says admin does not exist su $USER <- worked for me, however, my password still does not do much (in sense of not working for other things) I changed my password with pkexec passwd $USER. I was able to change it no problem. gksudo xclock was something I was able to get into, no problem. (Clock showed) ai@AiNekoYokai:~$ gksudo xclock

  Read the article

• Drawing Grid in 3D view - Mathematically calculate points and draw line between them (Not working)

  - by Deukalion

  I'm trying to draw a simple grid from a starting point and expand it to a size. Doing this mathematically and drawing the lines between each point, but since the "DrawPrimitives(LineList)" doesn't work the way it should work, And this method can't even draw lines between four points to create a simple Rectangle, so how does this method work exactly? Some sort of coordinate system: [ ][ ][ ][ ][ ][ ][ ] [ ][2.2][ ][0.2][ ][2.2][ ] [ ][2.1][1.1][ ][1.1][2.1][ ] [ ][2.0][ ][0.0][ ][2.0][ ] [ ][2.1][1.1][ ][1.1][2.1][ ] [ ][2.2][ ][0.2][ ][2.2][ ] [ ][ ][ ][ ][ ][ ][ ] I've checked with my method and it's working as it should. It calculates all the points to form a grid. This way I should be able to create Points where to draw line right? This way, if I supply the method with Size = 2 it starts at 0,0 and works it through all the corners (2,2) on each side. So, I have the positions of each point. How do I draw lines between these? VerticeCount = must be number of Points in this case, right? So, tell me, if I can't supply this method with Point A, Point B, Point C, Point D to draw a four vertice rectangle (Point A - B - C - D) - how do I do it? How do I even begin to understand it? As far as I'm concered, that's a "Line list" or a list of points where to draw lines. Can anyone explain what I'm missing? I wish to do this mathematically so I can create a a custom grid that can be altered.

  Read the article

• Windows domain full hostnames cannot be resolved resulting in intranet not working

  - by OpethR

  the domain: is foo.bar.local full hostname is: bla.foo.bar.local short hostname is: bla I installed winbind. here is my smb.conf: name resolve order = lmhosts host wins bcast here is my nsswitch.conf: hosts: files mdns4_minimal [NOTFOUND=return] dns wins mdns4 when I try to ping full hostname, I get: "ping: unknown host" when I ping short hostname it works and shows me PING bla.foo.bar.local (10.11.20.135) 56(84) bytes of data. 64 bytes from bla.foo.bar.local (10.11.20.135): icmp_req=1 ttl=62 time=49.7 ms *notice that it manages to get the full hostname!? :S now the only reason I need it is cuz I'm trying to reach intranet websites. when I type short hostname "bla" in firefox address bar, it automatically changes it to the full hostname (which is good, right?!) but then it says: Server not found Firefox can't find the server at bla.foo.bar.local. what am I doing wrong? it's driving me nutz. so if you are wandering then yes, it is company intranet I'm trying to reach from ubuntu. If I use my crappy winxp everything is working perfectly well.

  Read the article

• Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

  - by user90841

  Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

  Read the article

• Working with Git on multiple machines

  - by Tesserex

  This may sound a bit strange, but I'm wondering about a good way to work in Git from multiple machines networked together in some way. It looks to me like I have two options, and I can see benefits on both sides: Use git itself for sharing, each machine has its own repo and you have to fetch between them. You can work on either machine even if the other is offline. This by itself is pretty big I think. Use one repo that is shared over the network between machines. No need to do git pulls every time you switch machines, since your code is always up to date. Never worry that you forgot to push code from your other non-hosting machine, which is now out of reach, since you were working off a fileshare on this machine. My intuition says that everyone generally goes with the first option. But the downside I see is that you might not always be able to access code from your other machines, and I certainly don't want to push all my WIP branches to github at the end of every day. I also don't want to have to leave my computers on all the time so I can fetch from them directly. Lastly a minor point is that all the git commands to keep multiple branches up to date can get tedious. Is there a third handle on this situation? Maybe some third party tools are available that help make this process easier? If you deal with this situation regularly, what do you suggest?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >