Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 240/365 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• Diagnosing extremely slow network operations.

  - by Chris Becke

  The network: * A windows 7 PC with 2 NICs - one connected to an old style ethernet hub - the other to the internet - with internet sharing enabled * An Apple iMac connected to the hub, successfully utilizing the ICS to access the internet. My problem: Using the Mac, copying from the internet is fast. However, if I connect to a SMB: share on the Windows 7 PC and try and copy anything a few kb the copy operation is appallingly slow with my network card using the Windows 7 control panel showing ~.1% utilization. The NICs are 100Mbs and show a 10x larger throughput (now ~1%) if I download large files over the internet using the Mac. WTF?

  Read the article

• Best motherboard power supply combo for backblaze server

  - by jin14

  Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

  Read the article

• How to Use 3 Monitors

  - by The.Anti.9

  Right now my setup has a nice big 24" flatscreen in the center, and a 19" flatscreen to the left. And a big gaping hole on the right. I have a 3rd monitor to put there, but I'm not sure how to get the computer to recognize it. Do I need a graphics card with 3 ports? Or can I span the monitors over non SLI-Linked graphics cards? Is it possible to plug my 3rd monitor into the on-board VGA port and have it work?

  Read the article

• Caching Reverse-Proxy ISP Host for a Low-Bandwidth Server

  - by Casey

  I am building a webcam w/ HTTP server that will be running from a low-bandwith connection. The content on the site will be changing every 5 to 10 minutes. Instead of serving files directly from this connection, are there hosting companies that can act as a reverse proxy for my site? Therefore, if nobody is using the site, the local internet connection remains idle. And if I receive 1000 hits all at the same time, only one HTTP GET is required, and the hosting company (on a fat pipe) continues serving the other 999 requests? This doesn't sound like a very common usage model, but I feel like this would be the optimal solution to my situation.

  Read the article

• Can't find generic USB audio driver for a Samson COU1 USB microphone

  - by marcipollo

  I am unable to use a Samson USB CO1U microphone on a PC running XP, SP3. When I plug it into the USB port, Windows generates the sound indicating that it has found new hardware, and the green LED on the mic lights. But, it does not work, and the device manager reports that it cannot find a driver after searching. The same mic works on a Vista machine. Samson has no driver on their Web site, and insists that the generic audio driver in Windows should work. (http://www.samsontech.com/PRODUCTS/productpage.cfm?prodID=1810). I cannot find a generic USB audio driver at Microsoft.com. Can anyone help? Larry

  Read the article

• Chrome: Black Screen of Death

  - by davidsinjaya

  I dont know when it started to happen. The screen will turn into full black when a page include javascript (I think so). I cannot open Youtube videos, but I can still see the source code and the pointer to find links and buttons and I can hear the sound of video. I have tried to clear my cache and reinstalled to the latest version, but nothing seems work. Moreover, I have disabled the Pepperflash Player as well, but it did not help. This my chrome version Google Chrome 22.0.1229.79 (Official Build 158531) OS Windows WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 Please help.

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Samsung syncmaster SA300

  - by lee

  I recently bought the above moniter. i am now using the DVI port in the moniter but the picture quality stil seems average like the same when i was using the VGA port. THere hasnt been a noticeable change. I am using the DVI output from my graphics card but i thought the picture quality should be alot more High Def than what it is. im just really disappointed in the out come as was expecting nearly High Def quality from my new moniter but just seems a bit normal. Could i need to change any settings?

  Read the article

• Have 3 Monitors Display the same thing? (WinXP)

  - by Drew Tenenbaum

  I have a setup in which there is a Computer running windows XP, with 3 monitors plugged into it, with a "Matrox Millennium P750" Graphics card. What I want is to enable mirroring of ALL THREE MONITORS, meaning I want all the monitors to display the same image. In Matrox Powerdesk, it does not have an option to do this, and I'm pretty sure that Windows XP does not support it nativley. I really should only need some software/drivers, right? What can i do to display the same thing on 3 screens?

  Read the article

• Good quality voice communication software over Internet for windows

  - by ORA600

  I regularly attend over-the-phone meetings, where is a polycom/polispan device on the other side. The quality of the sound is bad, even those whose English is a first language sometimes are struggling to realize what is being said on the other side. I understand this is because of too aggressive audio compression in the line. Does anyone know any good audio chat software which does not over-compress audio stream. The IP channel between two offices is wide enough. In other words, you should be able to listen to a music (not only a speech) from the remote side with good quality. So, Skype is too over-compressing as well. Does anyone know anything like that?

  Read the article

• Ubuntu displaying GDM but no login

  - by Shawn

  Ubuntu (Wubi, Lucid Lynx) boots and shows the login screen itself with the background and plays the boot sound but a list of users is never displayed. A mouse is on screen and I can move it but, alas, it does nothing. Dropping to a virtual term with CTRL+Alt+F# drops me to a cursor but I can't actually input anything. I can't boot into single-user with GRUB since it's Wubi and it never specifies a boot kernel directly in GRUB's initial menu.lst (only in files that it then reads from). Other details that may be helpful: Single monitor Same video card that's been working for months No new hardware Edit: I ssh'd in since it evidently booted up the sshd which is handy. dpkg-reconfigure gdm didn't do anything helpful. I do, however, get a "no seat-id found" when manually running it.

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• Cheapest way to go for somebody who wants to accept payments, but won't be accepting hundreds of ord

  - by blockhead

  I have a client who lectures, and wants to sell spots to his lecture online. I would preferably like to set him up with a solution that allows me to collect billing information on his site. My experience with e-commerce is in using solutions like Authorize.net, however this does not seem cost effective since I can't imagine he's making a huge profit off of this. I'm afraid he would lose money in the cost of using Authorize.net (or any payment gateway for the matter). I could use google checkout or paypal express, but this would require me to leave his site (although with google checkout, it looks like, from a glance, that I could just submit to their form from my server, and likely with paypal as well, but I don't know if this is against their TOS). What is the most cost-effective solution for accepting credit card payments in this situation?

  Read the article

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• New entries on the GRUB

  - by Kiewic

  Hello. I updated my Ubuntu, and after that there were two new lines on my GRUB screen. Ubuntu 9.04, kernel 2.6.28-16-generic Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) Ubuntu 9.04, kernel 2.6.28-11-generic Ubuntu 9.04, kernel 2.6.28-11-generic (recovey mode) Ubuntu 9.04, memtest86+ Other operating systems: Microsoft Windows XP Home Edition Do I have two kernels installed? Do the old entries are still useful? Each kernel takes up space? :P And that's not all, when a get into the old version of Ubuntu, the wireless card stops working on any Ubuntu version until I get into Windows and then go back to Ubuntu. Thanks for your help.

  Read the article

• How to quickly switch monitors on multi-monitor setup? (W7)

  - by Saxtus

  At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• Debian no lib32asound2-plugins=1.0.25

  - by erai

  I compiled git wine 1.5.6 and the sound is not working correctly. winecfg gives a message: ALSA lib ../../pulse/pcm_pulse.c:995:(_snd_pcm_pulse_open) Unknown field handle_underrun err:winediag:AUDDRV_GetAudioEndpoint PulseAudio "default" -22 without handle_underrun. Audio may hang. Please upgrade to alsa_plugins >= 1.0.24 err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded But on wheezy there is no package lib32asound2-plugins 1.0.25 So, how do I build and package alsa-plugins to install to lib32? Or how do I use automake's configure to compile a 32bit lib on a 64 bit system. All I Need now is the libavcodec-dev for 32bit, but I don't understand. What is the 32bit libavcodec-dev package for amd64 debian?

  Read the article

• unknown monitor in lenova laptop

  - by kumar

  I have set of two lenova laptops in which Fedora core 13 is installed. In one machine, the monitor is detected properly such that It is possible to connect another monitor. But In another laptop, monitor is shown as unknown monitor. I tried to fix it by reinstalling xorg-x11-drv-intel.i686. But the problem remains same(unknown monitor). it is not possible to connect another monitor with this setting. Laptop model: G460. Graphics card: Intel Graphics Media accelerator HD. Thanks!

  Read the article

• Will Bluetooth hands-free drivers be installed if BT stack doesn't support A2DP?

  - by AndrejaKo

  I have a hands-free device which has no problems being paired with windows and I can set it to be the default sound output device, I don't actually hear anything on the unit, but it worked fine with GNU/Linux and with my mobile phone. From what I can see, the cause of that is usually a problem with Bluetooth stack. I think that I have Broadcom Bluetooth stack installed, so it should be working but it isn't. To make things better, my Bluetooth radio is integrated into my laptop and manufacturer isn't providing drivers for it and Broadcom itself recently pulled support, so I can't just reinstall the stack to make sure I have newest version.

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• How can I use 2 monitors plus laptop with my Dell e6420 w/ Nvidia nvs 4200m

  - by KallDrexx

  I have just hooked up a 2nd external monitor to my Dell e6420 laptop with a Nvidia NVS 4200m graphics card, running Windows 8 64 bit. However, the computer won't let me have both monitors and the laptop display active at the same time. I installed the latest Nvidia graphics drivers (310.70) but it claims that my GPU can only support up to 2 monitors. Nivdia's website implies differently (as does various other laptops around the office). The monitors are connected both via DVI to my dell docking station that has multiple DVI ports. Both monitors are working correctly, I just can't get all 3 working together. Attempting to download the driver from dell fails, as their driver installer is broken apparently Any ideas?

  Read the article

• fdisk (linux) partitioning raid0

  - by silverrocker

  'm trying to create partitions for a slackware instalation on my computer (beside Windows 7) just to have a nice distro running mostly for school but when I run fdisk and print the partitiontable I get the following message: Partition x does not end on cylinder boundary. (in my case x = 1, just using x to help googlers). I must say I'm using a raid card (AMCC 3ware 9500S SATA RAID Controller). Maybe this is the problem. How can I fix this without loosing any data? (I've posted this qeustion on stack overflow aswell but then people sugjested it should be moved to here, but I don't know how to move my question so I just posted it here manually (I hope that's ok))

  Read the article

• Broadcomm WIDCOMM A2DP Quality Adjustment

  - by snicker

  So I got a sweet pair of bluetooth A2DP headphones for a sweet, sweet price (Motorola A805, if you were wondering). They sound great paired with an iPhone. However, when I pair with a computer using the latest and greatest WIDCOMM drivers, the quality is quite poor, almost un-listenable... clicking, popping, scratching. The remedy on one machine was using BlueSoleil, another bluetooth stack, as there is an adjustment for the Bitpool settings that allow you to jack the quality up. Sounds great. However, the bluetooth chipset in my other machine is not supported by BlueSoleil... so I'm stuck with the WIDCOMM stack. So the question is... Is there an undocumented way to turn up the quality for A2DP in the WIDCOMM drivers? first question on SU, usually lurking on SO.. =]

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >