Search Results

Search found 16783 results on 672 pages for 'static typing'.

Page 240/672 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >

• esx5 debian VM vlan setup

  - by Kstro21

  i have a server with ESX5, have a switch with about 20 vlans, this is how setup the trunk port interface GigabitEthernet0/1/1 description ToOper port link-type trunk undo port trunk allow-pass vlan 1 port trunk allow-pass vlan 2 to 14 stp disable ntdp enable ndp enable bpdu enable then, i created a standar switch(sw1) using the vSphere Client, the VLAN ID is set to All (4095), i also created a VM with Debian 6, with a NIC connected to sw1, now, i want to configure this NIC for a selected group of vlans auto vlan10 iface vlan10 inet static address 11.10.1.0 netmask 255.255.255.224 mtu 1500 vlan_raw_device eth0 auto vlan14 iface vlan14 inet static address 11.10.1.65 netmask 255.255.255.248 mtu 1500 vlan_raw_device eth0 so, when i restart the network using /etc/init.d/networking restart, i got this error Reconfiguring network interfaces...SIOCSIFADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device vlan14: ERROR while getting interface flags: No such device SIOCSIFMTU: No such device vlan14: ERROR while getting interface flags: No such device Failed to bring up vlan14. done. this is just part of the error, so, my questions is: is this possible?, i mean, what i'm trying to achieve using ESX Virtual Machines, VLANS, etc is this a Debian problem? can be solved? i've read about a file named z25_persistent-net.rules in Debian but it doesn't exist in my installation. in the In the vSphere Networking for ESX5 guide, you can read: If you enter 0 or leave the option blank, the port group can see only untagged (non-VLAN) traffic. If you enter 4095, the port group can see traffic on any VLAN while leaving the VLAN tags intact. So, in theory, it should work, right? Hope you can help me up with this one Thanks

  Read the article

• Changing path to basedir of mysql

  - by shantanuo

  When-ever I need to start mysql from command line, I need to cd to the base directory and then use mysql command as shown below: # cd /home/ec2-user/percona-5.5.30-tokudb-7.0.1-fedora-x86_64/ # ./bin/mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 mysql> How do I start mysql simply by typing "mysql" at command prompt? I tried to export the path but it did not work. export path=$PATH:/home/ec2-user/percona-5.5.30-tokudb-7.0.1-fedora-x86_64/bin/

  Read the article

• Access VirtualBox-ed server from behind the router

  - by migajek

  I'm having the following configuration: Windows 7 hosting VirtualBox and it's guest: Ubuntu The machine (physical) which runs VirtualBox is behind the router and has the address of 192.168.0.110 VirtualBox runs the Bridged network, and the IP of VirtualBox-ed Ubuntu (eth0) is 192.168.0.200 Host (Win7) is running HTTP service on port 80, while guest (Ubuntu) is running it's service on port 9000 I can access both services from inside the network by typing the ip_address:port and this works fine. Both ports are forwarded on the router to their's respective IPs: 80 -> 192.168.0.110:80 9000 -> 192.168.0.200:9000 Unfortunately, accessing the router's external IP doesn't work as expected. While external_ip:80 works correctly, external_ip:9000 - doesn't I believe the problem is VBox - related, since the same network is running also other physical machine with Ubuntu and http service on 8000 and this one is forwarded correctly.

  Read the article

• Software for categorization with simple GUI

  - by rlesko

  Is there a simple software that would let me categorize, tag and search items that I input in it? It would be like a regular database but with a simplified GUI. I would add items with meaningful description and then categorize them and add tags. Then I would like to search (preferably real-time i.e. the search is showing results as I am typing) based on the item name/description, category or tag. The other option would obviously be that I just click the category or tag and it lists all the relevant results. List of categories and tags would also be a nice touch. Software is needed for Windows 7 or 8 or it can even be a Web app.

  Read the article

• CentOS: How to prevent a user from executing an application installed in a specific directory

  - by slayernoah

  I have an application installed in /etc/mydir. I have executed the following to remove the ability for users to execute this program. chown root:group1 /etc/mydir -R chmod 700 /etc/mydir -R I created a new user and logged in as this user. The new user was not added to group1 However, I was able to execute this program by just typing the program name. How can I stop users being able to run this using chmod and chown. Please let me know. PS. the new users cannot cd into /etc/mydir but they can still execute using the program name.

  Read the article

• How to handle files that don't need version control in mercurial

  - by richardh

  I am new to mercurial, and for the most part do LaTeX reports and statistical calculations in R using .csv and/or .sqlite files. Re LaTeX, all I really care is the .tex file. Re R, I don't need version control on the .csv or .sqlite files because they are static. When I do 'hg add' for a repo with a .csv and/or .sqlite file, I get a warning like: rev2.sqlite: up to 3070 MB of RAM may be required to manage this file (use 'hg revert rev2.sqlite' to cancel pending addition) So I revert and subsequently use adds like hg add -X *.sqlite. I guess I really have two questions: (1) Should I ignore these warnings? Because these large files are static, can I just add to the repo knowing that the diff files will always be empty and not worry about wasted resources? (2) If I should keep excluding these files from the repo, is there away that I can fix this option? I.E., add to my .hgrc file something that always appends an option like -I *.tex -I *.R to my 'hg add' commands? Thanks!

  Read the article

• Install Rails on linux [migrated]

  - by Jseb

  I am trying to install Ruby on Rails. and i have followed the following link for the install https://www.digitalocean.com/community/articles/how-to-install-ruby-on-rails-on-ubuntu-12-04-lts-precise-pangolin-with-rvm. This link was helpful i was able to run it, and everything, however as soon has i restarted the computer i then go into my apps and run it again with rails s and this message occurs. The program 'rails' is currently not installed. You can install it by typing: sudo apt-get install rails But work before, what should i do, do i need to set the path of somesort?? I am not that great in linux so bear with me. I am using linux ubuntu 12.04 desktop and my user is john Thanks in advance

  Read the article

• Selectively delete entries from Windows 7 autocomplete history dropdown box

  - by kez

  Random question, and I'm sure it has a very simple answer, if not already asked and answered in some shape or form. How do you selectively delete entries from the autocomplete history dropdown thingy? For example, in the Run dialog box, typing a few letters will display a dropdown box with a history of matchine entries that you have previously run. I swear I used to be able to delete from the list by using the arrow keys to highlight and then press the DEL key. Regardless of whether this is true or not, is there any way to selectively delete entries from this list? Another example is the dropdown list in the Remote Desktop Connection dialog box.

  Read the article

• port forwarding/network settings preventing from game hosting

  - by Xitcod13

  I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

  Read the article

• CloudFront with Custom Origin and ELB

  - by kmfk

  We are using CloudFront for our static assets but also wanted to allow for Gzip. We set up a new distribution with a custom origin pointing back to our application servers which are behind a elastic load balancer. We manually keep the files in sync across the cluster and update them when we publish. However, with this set up, we get nothing but Miss and RefreshHits from CloudFront, which so far has defeated the purpose. Is there any additional settings in order to use an ELB as your custom origin? In the docs, it references this as a viable solution. It appears when we point the distribution to a single server in our production cluster, cloudfront properly caches our assets. Is it possible that the sticky sessions cookie and the subsequent header that gets added by it could be an issue? Cache-Control: no-cache="set-cookie" //Added by load balancer Any ideas? FYI - currently, we have our custom origin pointing to a single EC2 instance, so caching is working correctly - in case you try to curl the file below. Example headers: curl -I http://static.quick-cdn.com/css/9850999.css HTTP/1.0 200 OK Accept-Ranges: bytes Cache-Control: max-age=3700 Cache-Control: no-cache="set-cookie" Content-Length: 23038 Content-Type: text/css Date: Thu, 12 Apr 2012 23:03:52 GMT Last-Modified: Thu, 12 Apr 2012 23:00:14 GMT Server: Apache/2.2.17 (Ubuntu) Vary: Accept-Encoding X-Cache: RefreshHit from cloudfront X-Amz-Cf-Id: K_q7Zy3_jdzlEJ85ukELVtdx1GmuXqApAbZZ7G0fPt0mxRMqPKX5pQ==,RzJmPku-rEIO9WlvuSoKa8hiAaR3dLk5KC4cQMWWrf_MDhmjWe8n6A== Via: 1.0 28c34f9fbf559a21ee16594849e4fc9c.cloudfront.net (CloudFront) Connection: close

  Read the article

• Find and raise a window in KDE4 with shortcut

  - by Andre_112

  Hi all! I was wondering about a possibility to find and raise some window in KDE4 with shortcut. Currently in KDE 4.4 there is a possibility to switch to window from krunner (Alt-F2). Say, I have an open konsole widow somewhere and to switch to it, I can Alt-F2, write konsole and choose konsole window I need from the list. This is great, but too much typing. I would like to have a keyboard shortcut to do the same. Maybe some DBUS magic can do that? Any ideas? Thaks! Andre

  Read the article

• Ubuntu server apt-get says "(-5 - No address associated with hostname)"

  - by Srini

  I have a ubuntu 12.04 server. Running sudo apt-get update on it produces errors like this: W: Failed to fetch http://au.archive.ubuntu.com/ubuntu/dists/precise-backports/main/binary-i386/Packages Something wicked happened resolving 'au.archive.ubuntu.com:http' (-5 - No address associated with hostname) I am able to ping all the other hosts on the network and also Google's DNS 8.8.8.8. But am unable to ping www.google.com. So, I'm guessing something is wrong with my DNS setup, but not sure what. I use static IP and my /etc/network/interfaces looks like this: auto eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.0.255 gateway 192.168.1.1 #dns-nameserver 203.12.160.35 203.12.160.36 #nameserver 203.12.160.35 203.12.160.36 My /etc/resolv.conf and /etc/resolvconf/resolv.conf.d/base are both empty and my /etc/resolvconf/resolv.conf.d/original says: nameserver 192.168.1.1 Any help would be greatly appreciated. P.S. I've googled it a bit and the common resolution is to switch to DHCP which I don't want to do since this is my home server. Thanks Srini

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  This might seem silly, and if there is no good and practical solution... I will live. I am a programmer and sit at a computer 10 hours a day - and even though the rest of me is nice and warm (at least warm), my fingers are cold as ice. Are there some gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad, so that it vents hot air on the mouse - and that works... But it is not very practical, plus it only works for one hand (and not very well). Tips?

  Read the article

• Can font substitutions in MS Word be controlled?

  - by Jukka K. Korpela

  Suppose that I am typing text in MS Word (any version) and I enter a character that does not exist in the font being used. Say, I’m using Times New Roman and I type 2300 Alt X, which turns to the diameter sign “?”, which does not exist in Times New Roman. MS Word picks it up from a different font, like Arial Unicode MS. This may mess up the typographic style, or line spacing. And this happens without notice. Perhaps the most inconvenient feature here is that MS Word does not automatically return to the original font. Subsequent text appears in the replacement font, unless the user sees what is happening and realizes that he needs to change the font. The question is: Can such substitutions be controlled, e.g. by specifying the font(s) to be used as backup fonts? If not, is there any reliable documentation about it?

  Read the article

• Error when I am trying to run Activiti BPM explorer

  - by test test

  I am facing the following problem : I have downloaded Activiti BPM which runs under Apache. I have installed both; Java jre7 & Java jdk1.7.0_06. I set the JAVA_HOME to be C:\Program Files\Java\jdk1.7.0_06. But when I try to run the Activiti BPM by typing the following in windows 7 command line : C:\activiti-5.10\activiti-5.10\setup>ant demo.start, the Tomcat server will start and the demo will build successfully, but if I try to navigate to the following link http://localhost:8080/activiti-explorer I get the following error : HTTP Status 404 - /activiti-explorer type Status report message /activiti-explorer description The requested resource (/activiti-explorer) is not available. Apache Tomcat/6.0.32

  Read the article

• Openvpn - stuck on Connecting

  - by user224277

  I've got a problem with openvpn server... every time when I trying to connect to the VPN , I am getting a window with login and password box, so I typed my login and password (login = Common Name (user1) and password is from a challenge password from the client certificate. Logs : Jun 7 17:03:05 test ovpn-openvpn[5618]: Authenticate/Decrypt packet error: packet HMAC authentication failed Jun 7 17:03:05 test ovpn-openvpn[5618]: TLS Error: incoming packet authentication failed from [AF_INET]80.**.**.***:54179 Client.ovpn : client #dev tap dev tun #proto tcp proto udp remote [Server IP] 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert user1.crt key user1.key <tls-auth> -----BEGIN OpenVPN Static key V1----- d1e0... -----END OpenVPN Static key V1----- </tls-auth> ns-cert-type server cipher AES-256-CBC comp-lzo yes verb 0 mute 20 My openvpn.conf : port 1194 #proto tcp proto udp #dev tap dev tun #dev-node MyTap ca /etc/openvpn/keys/ca.crt cert /etc/openvpn/keys/VPN.crt key /etc/openvpn/keys/VPN.key dh /etc/openvpn/keys/dh2048.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt #push „route 192.168.5.0 255.255.255.0? #push „route 192.168.10.0 255.255.255.0? keepalive 10 120 tls-auth /etc/openvpn/keys/ta.key 0 #cipher BF-CBC # Blowfish #cipher AES-128-CBC # AES #cipher DES-EDE3-CBC # Triple-DES comp-lzo #max-clients 100 #user nobody #group nogroup persist-key persist-tun status openvpn-status.log #log openvpn.log #log-append openvpn.log verb 3 sysctl : net.ipv4.ip_forward=1

  Read the article

• Serving images from another hostname vs Apache overload for the rewrites

  - by luison

  We are trying to improve further the speed of some sites with older HTML in order as well to obtain better SEO results. We have now applied some minify measures, combined html, css etc. We use a small virtualized infrastructure and we've always wanted to use a light + standar http server configuration so the first one can serve images and static contents vs the other one php, rewrites, etc. We can easily do that now with a VM using the same files and conf of vhosts (bind mounts) on apache but with hardly any modules loaded. This means the light httpd will have smaller fingerprint that would allow us to serve more and quicker, have more minSpareServer running, etc. So, as browsers benefit from loading static content from different hostnames as well, we've thought about building a rewrite rule on our main server (main.com) to "redirect" all images and css *.jpg, *.gif, *.css etc to the same at say cdn.main.com thus the browser being able to have more connections. The question is, assuming we have a very complex rewrite ruleset already (we manually manipulate many old URLs for SEO) will it be worth? I mean will the additional load of main's apache to have to redirect main.com/image.jpg (I understand we'll have to do a 301) to cdn.main.com/image.jpg + then cdn.main.com having to serve it, be larger than the gain we would be archiving on the browser? Could the excess of 301s of all images on a page be penalized by google? How do large companies work this out, does the original code already include images linked from the cdn with absolute paths?

  Read the article

• Language bar switched input types on me.

  - by Elijah

  I learned Japanese, but I'm not native to Japan, so I never had a Japanese keyboard. I used to use the language bar to go back and forth between English and Japanese, simply typing the words in romaji and having windows convert it into either hiragana, katakana and sometimes Kanji. Suddenly, my input type changes. I am no longer able to simply type in English, it changed my keyboard into a native Japanese keyboard, and what's worse it doesn't even allow me to write in hiragana, which I would need way more than katakana. Can anyone tell me how to restore it to the old setting where I simply chose what the output dialect would be, and typed the words phonetically in english and have it translate the sounds for me into japanese characters?

  Read the article

• The cache is getting at full level so fast

  - by CompilingCyborg

  Please, the memory and the cache are getting to the full level quite quickly under my linux mint 9 - isadora system. I used Ubuntu and Debian before, and it was not causing this issue at all. At the current time i typing the following command frequently to empty the cache "echo 3 /proc/sys/vm/drop_caches". Please any way around this? or do you know what's going wrong? | I am only programming on this machine; no graphics, no games nothing. Thanks in advance for your help!

  Read the article

• How to call a program and exit from the shell (the caller) when program is active?

  - by Jack

  I want to run a program with GUI, by typing into konsole: foo args … and exit from the shell (that's the caller) when the program (foo) is active. How do I this? Is there a Linux/Unix built-in command/program to do it? I'm not a shell-man, really. I know that it's possible by writing a small program in C or C++ (any other programming language with small I/O interface on POSIX) programming language with the fork() and one-of exec*() function family. It may take some time; I'll do it only if there is no native solution. Sorry for my bad English; it's not my native language. Also, not sure on tags, please edit for me, if I'm wrong. If it matters, I'm using OpenSUSE 10.x.

  Read the article

• Server 2008 Active directory file sharing Restriction

  - by Usman

  My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

  Read the article

• Keyboard layout to shift wasd keys

  - by Joel Coehoorn

  I like to play video games on my computer. One of the things that bugs me, though, is how the wasd keys became the standard movement keys in first person shooters and mmorpgs. To me, esdf makes a lot more sense, because that matches your normal hand placement for typing. "Fixing" that layout is always the first thing I do when installing a new game. Sadly, this is often a pain in the neck, and some games won't let you do it at all. Is there an alternative keyboard layout you can install that will just switch these around, so the wasd keys fall in the esdf positions? And is low-level enough two work with DirectX/DirectInput, perhaps that works with the language bar for easy swapping back and forth?

  Read the article

• Using a nat rule to translate 80/443 traffic to web server, but internal users cannot access it using external ip/domain name

  - by Josh

  I am using Cisco ASDM for ASA I have my internal network called soa. My outside interface is called outside. Let's say my outside IP given to me by my ISP isp is y.y.y.y I have a web server inside my network with a static ip of x.x.x.110. I have configured 2 static nat rules (one for http the other for https). Source is x.x.x.110. Interface is outside, service (http or https). Maybe I am doing this wrong, but when I run the packet tracer, I choose outside interface and for the source IP I used 8.8.8.8 and the destination ip is my outside IP address, y.y.y.y When I run that, it shows the packet traversing successfully, using 9 steps. For my other test, I switch to the soa interface, input an ip on that network, and leave the destination the same. This test comes up with 2 steps and then fails on my access list. When I see the rule that fails, it is my catch all which is source: any desitnation: any, service: ip action: deny. What rule do I need to make to allow my soa network access to go out and come back in by my external IP addess (using a domain name attached to that ip in my dns, of course)?

  Read the article

• Raspberry pi slows down my entire network

  - by gnusouth

  Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

  Read the article

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247  | Next Page >