Search Results

Search found 8706 results on 349 pages for 'boot camp'.

Page 241/349 | < Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• MAAS fails to Commission nodes

  - by user3644848

  I'm evaluating MaaS/Juju. I followed instructions in this link http://maas.ubuntu.com/docs1.5/install.html to setup MaaS. I'm running this in Oracle VirtualBox environment so Power options are not configured for the VMs. PXE booting VM works fine. The node shuts down itself and registers with MaaS in Declared state. Issues: a) When I Commission the VM (which is in the Declared state), first it gets IP-Config: no response after 60 secs - giving up errors. (See link below for a screenshot). b) Fails to mount the boot device and drops into initramfs prompt. I've copied logs here: https://www.dropbox.com/sh/5gy9nnonbnccufo/AAD9o4awSOtyaCCmRe5q7rBva Any help to get past this is greatly appreciated. Thanks!

  Read the article

• New EFI Laptop: After restart, Ubuntu boots to black screen?

  - by Henson S

  So, I've got this new laptop (Acer Aspire 5560 15") that's doing a funny thing.. If I cold booth the machine, everything is great! I see the grub menu, and Ubuntu 12.04 loads just fine. If I reboot within Ubuntu, I see the BIOS screen, but then nothing. No grub menu, no hard drive activity except for just a blip. I noticed that when installing Ubuntu this time, I had to create an EFI boot partition -- something I'm not used to. And I'm guessing that it has something to do with the issue. Could be totally wrong. Any ideas?

  Read the article

• How to replace GRUB with BURG without overwriting MBR?

  - by StepTNT

  I'd like to install BURG but I don't want it to overwrite my MBR. That's because I've got two bootloaders in my system : Default Windows 7 in MBR Grub in /dev/sda2 With the first power button, it will boot into Windows and with the second button it boots from /dev/sda2, loading Grub and then Kubuntu. Now I want to replace GRUB with BURG. I've installed Burg with burg-install /dev/sda2 --force because I don't want my MBR to be overwritten (pressing the first power button MUST load Windows and avoid showing any sign of Linux). Setup was completed without errors, If I open burg-manager it loads my settings, allowing me to change them and to test everything with burg-emu, so I've changed my settings but the second power button still loads GRUB (Even a different version from the default Kubuntu one). How can I replace GRUB that's on /dev/sda2 with BURG and without overwriting MBR?

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• 6 Start Menu Replacements for Windows 8

  - by Chris Hoffman

  Want a Start menu on your Windows 8 desktop? While Microsoft no longer includes the Start button, opting instead for a click in a hidden corner and a new Start screen, there are quite a few Start menu replacements you can choose from. You can try living without the Start button and customizing your Start screen – it’s very possible to get by without the Start button and some people seem to prefer the new interface – but you have a choice. Many of these tools also allow you to boot directly to the desktop and hide the charms and app switcher that appear when you move your cursor to the corners of the screen, giving you a more traditional desktop experience. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Week in Geek: Microsoft Kills a Huge Spammer Botnet

  - by Asian Angel

  This week we learned how e-mail works, to “fix the Windows Boot Record after a GRUB Loader meltdown, share Mac Folders with a Windows PC, & reinstate the Outlook Reminder Bell”, to use two Android tools to help cut down on phone bills, the first things that our readers recommend doing after installing a new OS, had fun setting up unique desktops with a Terran Solar System Customization set, and more. Photo by Bill Ward’s Brickpile.HTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To KnowHTG Explains: How Does Email Work?

  Read the article

• Creating a bootable USB recovery drive to be used by someone who isn't computer savvy

  - by David

  I am looking for a way to prepare an image of an Ubuntu machine which would be bootable and installable in the easiest way possible. I'm actually preparing an Ubuntu machine for someone living far, and not computer savvy. If he ever has troubles with his installation, he could just put a USB drive in, boot the machine and everything would be resetted for him. I know there are many methods of creating/loading an image of a drive, but the ones I've found so far have complicated menus with several options to choose from, etc. Ideally, perhaps only asking a Yes/No question such as "Would you like to reinstall?" would be great. Does such a tool exist? Thank you in advance!

  Read the article

• Xen 4.1 + NVidia driver = Unity has no window decorations

  - by Shade

  I am running Ubuntu 11.10 with Unity. I installed XEN and booted its kernel. The machine booted normally. However, when I started Unity (3D), there were no window decorations. I tried Unity 2D and the window decorations are present there. I then decided to remove the driver (installed through Additional Drivers) and install it manually like this: IGNORE_XEN_PRESENCE=y CC="gcc -DNV_VMAP_4_PRESENT -DNV_SIGNAL_STRUCT_RLIM" ./NVIDIA* ...but the window decorations were still missing in Unity 3D. The window decorations are there when I boot the regular Ubuntu kernel (without XEN support). What could be the problem and how to fix it?

  Read the article

• Why doesn't Microsoft support virtualizing a Server OS on Windows 7?

  - by Nathan DeWitt

  Microsoft doesn't support any server operating systems in Windows Virtual PC. Virtual Server 2005 doesn't run on Windows 7. Hyper-V is great, but I don't want to run Server 2008 as my main OS, and I love having Windows 7 run on the bare metal. I don't want to mess around with a dual boot. My only option to continue developing in Windows 7 with a virtual server environment on hand is VMWare or VirtualBox. Other members in my team use Hyper-V, and VHDs are common. I'd prefer to be able to use their VHDs, so that leaves me VirtualBox. Does anyone know if Microsoft is planning on bringing server virtualization back to the workstation?

  Read the article

• ati graphics always on

  - by naveen

  i use a lenovo y560 and has ubunto 12.04 and win 7 installed when i boot into ubunto i find that the ati car is always on which drains the battery and overheats the system is there any to switch off the ati graphics and use intel hd in ubuntu ati hd 5730 is the graphics card that i use and it has switchable graphics in it. in bios the only two options for video adapter is discrete and switchable after installing ati driver from amd website i am getting a commamd prompt as log in screen first error message comes as Your system is running in low-graphics mode with options to run in low graphics mode this time reconfigure exit all three options i am stuck i need to manually reboot the system

  Read the article

• Installing Ubuntu on btrfs over multiple drives

  - by Tom Ato

  When I installed Ubuntu 13.04, I managed to combine a couple of outdated askubuntu answers, as well as some of the btrfs documentation in order to figure out how to install Ubuntu over two SSDs using a single btrfs partition (I think /boot was on a small ext4 partition). I want to install Ubuntu 13.10 in a similar way, using a single btrfs partition striping data over the two SSDs, but I don't feel comfortable synthesizing a method that I am sure will work with current software. What is the best way to partition and install Ubuntu over two SSDs using btrfs, in an effectively RAID 0 way?

  Read the article

• Tomboy won't start

  - by torbengb

  I've just discovered Tomboy and like it. I added it to the startup applications, and on next boot Tomboy won't start. It then also won't start when I select it manually from the menu. I unchecked its entry in the startup applications and rebooted, but it still won't start. I uninstalled it and installed it again in order to perhaps fix some broken file or setting, but it didn't help. I saw this question and added the Applet. But the applet says "Tomboy Notes" has quit unexpectedly and a reload doesn't work; the message appears again. How can I determine (and fix!) what's wrong?

  Read the article

• How can I force a preferred sound output device to be used?

  - by Dave M G

  In my sound settings interface, there are two devices for sound output: Both refer to the same physical device, which is a network sound device. Both work, but only with the second one, Simultaneous output to Kenwook Audio Device Digital Stereo (IEC958) on mythbuntu@mythbuntu, does the output volume respond to being changed. The first one always plays at the same level, and ignores volume settings. Every time I boot, the first one is selected. How can I make it so the second one is the default and the first one is disabled or at least never selected?

  Read the article

• HTG Explains: What Is Windows RT and What Does It Mean To Me?

  - by Chris Hoffman

  Windows RT is a special edition of Windows 8. It runs on ARM and you’ll find it alongside Intel x86 machines in stores, but you’ll be surprised just how much Windows RT differs from the Windows you know. Windows RT is so different  that Microsoft has told Mozilla Windows RT “isn’t Windows anymore.” If you’re looking to buy a Windows system in stores, you should know the difference between Windows RT and the other editions of Windows 8. Image Credit: Kiwi Flickr HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

  Read the article

• Why do I have to reconnect my usb router cable?

  - by Searock

  I have a Iball Baton ADSD2+ Router. It's working fine but the problem is when I boot into Ubuntu I have to unplug the usb cable and then plug it again, then it starts working. Why do I have to re connect my usb cable? Let me know if you need more details. Edit : I am using a direct connection. I mean to say I don't have to enter a username or password. I am connected to internet as soon as I start my router. The problem is if I start my router before my computer I have to re connect my usb cable. Thanks.

  Read the article

• DIY HDTV Antenna Sticks To Your Window without Blocking the View

  - by Jason Fitzpatrick

  This DIY fractal-based HDTV antenna is cheap, easy to craft, and can be stuck unobtrusively on your window for better signal gains. Courtesy of HTPC-DIY, this simple build uses aluminum foil, a printed fractal pattern, clear plastic, and some basic hardware to create a lightweight and transparent antenna you can affix to a window without significantly blocking light from entering the window. Hit up the link below for the full build details as well as designs for other DIY antennas. DIY Flexible Fractal Window HDTV Antenna [via Hack A Day] HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

  Read the article

• WUBI install not completing on Dell Latitude D600 using 10.04 and 10.10

  - by Dennis

  While trying to install a dual boot from LiveCD, WUBI seems to go through all the steps correctly. It unpacks everything, reboots, starts to finalize the install, brings up the install slide show and seems to do everything necessary. The slide show disappears and what is left is what would normally be the background, however there is no login, no panels, no response to any input or keystrokes. Using 10.04 I had a mouse cursor (working) with 10.10, not even that. In 10.04 The only way to reboot is to shutdown using the power switch. When it reboots it goes through the "finalizing install" phase again. In 10.10 if I hit the power switch it brings up a shutdown menu that doesn't respond to the keyboard, but does shutdown when the 60 seconds expire.

  Read the article

• How to install XAMPP?

  - by Rani.Shemer

  Hi all im a noob on Ubuntu/Linux World, So i need some that give a full tutorial to How to install Xampp from apachefriends.org correctly on Ubuntu 11.10 + all beyond Ubuntu for 32 bit and also 64 bit Desktop Version.. and also i need this: Make a Folder on Your Home Folder and Linked to htdocs from Apache Web Server Make a GUI interface for Xmapp Start Xampp when Ubuntu Boot Up or Start Ubuntu (Note: i ask it for both X86 and X64 so people in the further can see the tutorials) New Data: What i did was i download from apachefriends.org for now and i also what to say that I'm currently running Ubuntu 11.10 X64 bit for Dell Studio 1558 processor intel i3 i will let you know guys which solution was the best, and it is for a Desktop Version of Ubuntu 11.10 (Laptop 15 inch screen ^_^ ) not Server Ubuntu

  Read the article

• Downgrading from ubuntu 11.10 to 10.10, keeping installed programs

  - by Peter

  I recently upgraded from 10.10 to 11.04 then 11.10, and I'd like to revert back to 10.10. I understand that you cannot downgrade a version as easily as you can upgrade, and that I'll probably have to get the boot CD again and reinstall the whole thing. I know that I can keep most of my files by saving the /home directory, so 2 questions: Once I've gone back to 10.10, can I juts copy my old version of home over the freshly installed one? Is there a way to keep all of my installed programs, or some sort of way of getting the new install to automatically install them? Will I have to go through the tricky setups of things like TeX all over again? Thanks

  Read the article

• First time using Ubuntu, need help with drivers!

  - by Nick

  I have just successfully built my first computer last night. I went through the boot menu and got Ubuntu 12.10 installed properly and everything. My question is...now what? There has to be some sort of drivers I need to install right? I can't connect to wi-fi or anything of that sort. I have an ASUS motherboard, model number M4N98TD EVO , and an NVIDIA Geforce GTX 650 grpahics card. I guess my main question is, can someone run me through step by step what I need to do after I install Ubuntu?

  Read the article

• Which programming language suits a system that must work without user input

  - by Ruud

  I'm building a prototype of a device that will function much alike a digital photoframe. It will display images retrieved from the internet. The device must start up and run the photoframe. It will have no user interface. The device has a minimal ubuntu installation, but I could install Xorg or whatever needed. Question: I have trouble figuring out which programming language will be suitable. I've just started using Python to try out several things and I am able to download and display images. I guess that means Python can do what I'd like, but is it suitable as a language that will be run on boot without any user interference? Related questions: - How do I set up Linux to start that script automatically? - How to setup a second Python script as a server that runs in the background to retrieve images before they are displayed (Because I think I'll need threading of some sort?)

  Read the article

• Ubuntu 10.10 USB drive not showing

  - by Ben

  USB is detecting but not showing the drives or mount details. Nothing there inside my /media folder and /mnt folder. I already enabled automatic mount and give privilege to user also. My sudo fdisk -l shows like: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d3ba7 Device Boot Start End Blocks Id System /dev/sda1 * 1 29637 238053376 83 Linux /dev/sda2 29637 30402 6142977 5 Extended /dev/sda5 29637 30402 6142976 82 Linux swap / Solaris Any idea?

  Read the article

• Not mounting/finding 1TB NTFS drive

  - by Dave

  I am having trouble with Ubuntu recognizing/finding/mounting one of my hard drives. I dual boot Ubuntu and Windows 7. I had Ubuntu 10.04 and all drives showed up under "Places" I could click on any of my Windows/NTFS drives and they would mount as they should. I have since updated to Ubuntu 10.10. One of my drives no longer shows up in "Places" or in Nautilus. I can open gparted and it is listed there, but if I try to click the mount button, I get an error. I am currently at work and can not post any screenshots or errors, but will happily do so later. I was just hoping that someone might be able to give me something to try when I get home. 250gig SATA hard drive (Windows7/NTFS) - recognized/mountable 200gig PATA hard drive (Ubuntu 10.10) - recognized (obviously) 1TB SATA hard drive (NTFS) - not recognized/won't mount Thanks!

  Read the article

• Cannot read from 2nd SATA data drive connected via SATA docking station

  - by Robbo

  Installed 10.10 this week on dual boot system. Everything else works fine but cannot read from 2nd SATA drive with all my data. Same drive works normally when booted to Windows XP. Interesting part is that I can see the drive in Ubuntu Disk Manager, can read all its attributes, can test it, shows up in Disk Manager, Storage Device Manager and Mount Manager, and can mount it, even change attributes; it appears healthy but does not show up in "Computer" or anywhere else that it can be accessed. The drive is connected via an external e-SATA docking station which is connected to a SATA port on the motherboard.

  Read the article

< Previous Page | 237 238 239 240 241 242 243 244 245 246 247 248  | Next Page >