Search Results

Search found 6703 results on 269 pages for 'gnome terminal'.

Page 243/269 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• Running a program on boot without login, using the screen

  - by configurator

  Preface: I have a server running on an old laptop. The screen is always on with a login prompt, but because its keyboard is in pretty bad shape, I use it exclusively via ssh. The screen is in a good position, though; I want to use it to display a clock and some stats about what my server is doing. I have scripts to display all those things, but I want to always show them on the monitor screen. My question is, how do I get my script (called HUD) to run on /dev/tty1, instead of the login prompt. Hopefully, it should be possible to accept keyboard input as well as display its output, so that it can use the keyboard to show more info where needed in a future version. I'd also like tty2 etc. to remain active as login screens, in face I actually do need to login locally. For a start, I tried creating a script that I can run from ssh to start the HUD. It goes something like this: ( flock -n 9 watch --interval 0.2 --precise --color --notitle --exec /path/to/script & disown ) 9> /var/lock/hud > /dev/tty1 2> /dev/tty1 < /dev/tty1 (I had to use & disown instead of nohup because nohup recognized the tty and redirects output to nohup.out instead.) This sort-of works. However, it has a few issues: It doesn't steal the terminal's keyboard input, so you can't ctrl+c to get out of it (nor change the script to actually use the keyboard input), and if you press enter it show it and scrolls the display, never refreshing it correctly afterwards. Oddly, if I disconnect the ssh session which created it, it stops working and shows a message: exec: No such file or directory. If I reconnect to ssh, it resumes functioning properly. It feels hackish. Is there a better way to do this? How?

  Read the article

• Ubuntu doesn't "see" external USB Hard Disk

  - by Mina Michael

  It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

  Read the article

• What's about Java?

  - by Silviu Turuga

  What is Java? In very short words, Java is a programming language that let you make an application that can be run on different operating systems, no matter we are talking about Windows, Mac OS, Linux or even embedded devices, such as RaspberryPi. When you compile a Java program, instead of getting a binary output as you get on other programming languages, you'll get a Java intermediate code, called Java bytecode. This is interpreted at run time, by a virtual machine that is specifically for the hardware and operating system you are using. What Java do i need? There are 5 major versions of Java: Java SE(Standard Edition) - this is what I'll use on most of my tutorials. Most of the examples will run on Java 6, but for others you'll need Java 7. Java EE (Enterprise Edition) - used for enterprise development Java ME (Micro Edition) - for running Java on mobile and different embedded devices such as PDAs, TV set-top boxes, printers, etc. Java Embedded - for some embedded devices such as Raspberry Pi, where the resources are limited JavaFX - to develop rich content User Interfaces. This is also something that will use a lot. More detailed information can be found on Oracle's website If you just want to run java applications you'll need the JRE (Java Runtime Environment) installed. If you want to program and create new applications, then you'll need the JDK (Java Development Kit).  How to check if Java is already installed? From command line, if you are on Windows, or from Terminal on Mac enter the following: java -version You should get something like this, if you have java installed on your system: java version "1.6.0_37" Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909) Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode) Note: your current Java version might be different from mine. More information https://www.java.com/en/download/faq/whatis_java.xml http://en.wikipedia.org/wiki/Java_(programming_language) Next steps Install Java SDK Chose an IDE. I recommend NetBeans as it is very easy to use and also let you quickly create the GUI of your application Alternatives are Eclipse, Komodo Edit (for Mac), etc. There are plenty of solutions both free or paid. Resources on web Oracle Tutorials - lot of tutorials and useful resources JavaRanch - forum about java

  Read the article

• Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

  - by XaviGG

  I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

  Read the article

• problem in repairing software center

  - by REGZEN

  what should be done regarding this error(software center) - installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 90% Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. this error is repeating whenever i am repairing software center. I'm having problems with my software center .. when i want to install some package that following message it appears "items cannot be installed or removed until the package catalog is repaired. do you want to repair it now?" after i click Repair, another window pops up, saying : "Package operation fails - The installation or removal of a software package failed" I click repair, and a few seconds later, it pops up again!!!! no matter how many times i click repair, nothing happens. Also .. I've Another Problem With Update Manager That Shows Me The Following Message: " the package system is broken. Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f" also, i tried sudo apt-get install -f i got this error... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Extracting templates from packages: 100% Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) Please provide a solution

  Read the article

• Why Java's JMF doesn't work in Linux?

  - by Visruth CV

  I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• Cannot install "ATI/AMD proprietary FGLRX graphics driver" (SystemError)

  - by Fisherman John

  I have just installed a fresh copy of 12.04.1 64bit. I formatted my PC completely and enabled updates during the installation. After the installation was complete, I went on updating my software. However, when I wanted to install the additional drivers using the Additional Drivers tool (namely "ATI/AMD proprietary FGLRX graphics driver"), it gave me this error: SystemError: E:Unable to correct problems, you have held broken packages. The same error shows up if I try installing the post-release updates driver. Installing the drivers from the terminal results in this output: XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." I get this using "sudo apt-get update": http://pastebin.com/AWAtDXjY But "sudo apt-get install fglrx" still get me this error: http://pastebin.com/RYM55bVN & "sudo apt-get -f install fglrx" gives me this error: http://pastebin.com/xxekajvP Any help would be greatly appreciated. (Please note that I'm new to Linux, coming directly from Windows. I have tried Ubuntu twice or so before, but it was not for a long period of time. The drivers got installed smoothly the few times I've tried Ubuntu, but post-release updates never worked for me.) [I am going to work now, so I can only answer from my phone. Can't really test any new solutions you may give me until ~10 hours from now on. Maybe more.] @stonedsquirrel When I try to run that command, I get this error: "XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." ie. I get the same error. ( I am Fisherman John, dunno how to login & thereby respond to your comment again _ )

  Read the article

• Introducing the Metro User Interface on Windows 2012

  - by andywe

  Although I am a big fan of using PowerShell to do many of my server operations, that aspect is well covered by those far more knowledgeable than I, and there is vast information around the web already on that. The new Metro interface, and getting around both Windows 8 and Windows Server 2012 though is relatively new, even for those whop ran the previews. What is this? A blank Desktop!   Where did the start button go? Well, it is still there...sort of. It is hidden, and acts like an auto hidden component that appear only when the mouse is hovered over the lower left corner of the screen. Those familiar with Gnome or OSX can relate this to the "Hot Corners" functions. To get to the start button, hover your mouse in the very left corner of the task bar. Let it sit there a moment, and a small blue square with colored tiles in it called start will appear. Click it. I clicked it and now I have all the tiles..What is this?   Welcome to the Metro interface. This is a much more modern look, and although at first seems weird and cumbersome, I have actually found that it is a bit more extensible, allowing greater organization and customization than the older explorer desktop. If you look closely, you'll see each box represents either a program, or program group. First, a few basics about using the start view. First and foremost, a right mouse click will bring up a bar on the bottom, with an icon towards the right. Notice it is titled “All Apps”. An even easier way in many places is to hover your mouse in the exact opposite corner, in the upper right. A sidebar will open and expose what used to be a widget bar (remember Vista?), and there are options for Search, Start, and Settings.   Ok Great, but where is everything? It’s all there…Click the All Apps icon.   Look better? Notice the scroll bar at the bottom. Move it right..your desktop is sized to your content..so you can have a smaller, or larger amount of programs exposed. Each icon can be secondary clicked (right mouse click for most of us, and an options bar at the bottom, rather than the old small context menu, is opened with some very familiar options.   Notice the top of the Windows Explorer window has some new features. You still have your right mouse click functions, but since the shortcuts for these items already exist..just copy them. There are many ways, but here is a long way to show you more of the interface. 1. Right mouse click a program icon, and select the Open File Location option. 2. Trusty file manager opens…but if you look closely up at top edge of the window, you’ll see a nifty enhancement. An orange colored box that is titled Shortcut Tools and another lavender box Title Application tools. Each of these adds options at the top of the file manager window to make selection easy. Of course, you can still secondary click an item in the listing window too. 3. Click shortcut tools, right click your app shortcut and copy it. Then simply paste it into the desktop outside the File Explorer window Also note some of the newer features. The large icons up top below the menu that has many common operations. The options change as you select each menu item. Well, that’s it for this installment. I hope this helps you out.

  Read the article

• ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

  - by Monkey Drone

  Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

  Read the article

• Upgrade to Xubuntu 13.10 - Saucy Salamander

  As a common 'fashion' it is possible to upgrade an existing installation of Ubuntu or one of its derivates every six months. Of course, you might opt-in for the adventure and directly keep your system always on the latest version (including alphas and betas), or you might like to play safe and stay on the long-term support (LTS) versions which are updated every two years only. As for me, I'd like to jump from release to release on my main desktop machine. And since 17th October Saucy Salamander or also known as Ubuntu 13.10 has been released for general use. The following paragraphs document the steps I went in order to upgrade my system to the recent version. Don't worry about the fact that I'm actually using Xubuntu. It's mainly a flavoured version of Ubuntu running Xfce 4.10 as default X Window manager. Well, I have Gnome and LXDE on the same system... just out of couriosity. Preparing the system Before you think about upgrading you have to ensure that your current system is running on the latest packages. This can be done easily via a terminal like so: $ sudo apt-get update && sudo apt-get -y dist-upgrade --fix-missing Next, we are going to initiate the upgrade itself: $ sudo update-manager As a result the graphical Software Updater should inform you that a newer version of Ubuntu is available for installation. Ubuntu's Software Updater informs you whether an upgrade is available Running the upgrade After clicking 'Upgrade...' you will be presented with information about the new version. Details about Ubuntu 13.10 (Saucy Salamander) Simply continue with the procedure and your system will be analysed for the next steps. Analysing the existing system and preparing the actual upgrade to 13.10 Next, we are at the point of no return. Last confirmation dialog before having a coffee break while your machine is occupied to download the necessary packages. Not the best bandwidth at hand after all... yours might be faster. Are you really sure that you want to start the upgrade? Let's go and have fun! Anyway, bye bye Raring Ringtail and Welcome Saucy Salamander! In case that you added any additional repositories like Medibuntu or PPAs you will be informed that they are going to be disabled during the upgrade and they might require some manual intervention after completion. Ubuntu is playing safe and third party repositories are disabled during the upgrade Well, depending on your internet bandwidth this might take something between a couple of minutes and some hours to download all the packages and then trigger the actual installation process. In my case I left my PC unattended during the night. Time to reboot Finally, it's time to restart your system and see what's going to happen... In my case absolutely nothing unexpected. The system booted the new kernel 3.11.0 as usual and I was greeted by a new login screen. Honestly, 'same' system as before - which is good and I love that fact of consistency - and I can continue to work productively. And also Software Updater confirms that we just had a painless upgrade: System is running Ubuntu 13.10 - Saucy Salamander - and up to date See you in six months again... ;-) Post-scriptum In case that you would to upgrade to the latest development version of Ubuntu, run the following command in a console: $ sudo update-manager -d And repeat all steps as described above.

  Read the article

• Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

  - by BubbaJ

  I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

  Read the article

• Laptop freezes and seems to crash, but continues working after waiting for a few minutes [closed]

  - by Corwin

  I've had this old notebook laying around and because i was missing a second machine (My wife usually steals the first ;) ) I considered installing Linux. As a php developer I work with Linux servers (usually fedora) on a daily basis and because its an older machine that I want to use for development, linux seemed the best option. Speedwise I expected a good experience, better than Windows 7 on the same machine. The results where terrible. I tried ubuntu 12.04. The shell never got past showing the background. The system doesn't freeze since the mouse still works and I can use ctrl+alt+f2 etc to enter terminal mode. I expected hardware problems en even exchanged the harddisk en Ram memory. No luck though, so I started over and tried 11.10 Same results so I tried 10.04.4 which did install properly. Not sure if unity was the problem, but it seems likely. But then I tried simply things like surfing on the net, the system frooze and I thought it crashed so after a few minutes I pulled the plug and rebooted. But it happened again and I waited. After a few minutes the system came back to life like nothing happened. Long story short. Besides the fact that the entire interface is very sluggish, any and all graphical functions freezes the system. The more elaborate the animation would be, the longer it freezes. I switch chromium from window to fullscreenmode and had to wait 15 minutes to continue. I don't see the animation that's probably supposed to be in between. It just freezes and then after unfreezing its fullscreen. I don't think its a bug. I suspect the problem is with my graphics card. Like I said, its and old system. So old that I can't even find the original Ati drivers anywere. (I'll post the details of my system at the end of my post) I'm at a loss as to what to do next. I tried other Distro's. So far only dreamlinux works normally. Linux Mint won't start as a live CD. I think I simply need a driver update but I can't find them anywhere. Does anyone have the same experience ? Maybe even someone who has or had the same notebook running Ubuntu at some point ? Anyway, here are the specs: http://www.nec-driver.com/nec-driver/NEC-Versa-P550---FP550-Driver_421.html

  Read the article

• Running MS Access Programs

  - by fredhappier

  I have an old program developed in MS Access and would like to convert it to Kexi somehow. The program on Windows is launched with Access. Is there any way that Kexi can launch this program? I know my way around Ubuntu and the terminal, but not well versed on databases. Once you make something in Kexi how do you "run" it or "view" what you've made? So far I am able to import the MDB file into Kexi and see all of the database data, but that is as far I have gone. The program was made by a relative years ago for my dad. I myself am an Ubuntu only user for 6+ years now and have no intentions to touch Windows and am looking for a linux solution. My dad is also an Ubuntu user, hence why Im looking for a solution. If Kexi cannot launch and run an MDB file, what else can I try? Anything browser based? Any tips or direction would be extremely helpful. I spoke to my brother who originally made the program. I told him about Kexi and here is what he said. Does any of this make sense? Thanks. This is how I would try to get them to work: Stand alone setup - after import, look for an option where you designate which form object you want to open upon startup. It might be in the tools tab in the picture below. After you save that change, it re-start it and it should work. Front end/back end setup - Do what I suggested for the stand alone setup to the "front-end" MDB file. After you do that, put the other file (table MDB file) where you want it to reside on the network. Now, open back up the "front end" file and look for an option that will allow you to "connect" to those tables in the other file. It looks like it could be in the "External data" tab in the picture below. For this setup, you may need to do these two tasks in the reverse order I just mentioned. Thanks! Fred

  Read the article

• Linked server problem on SQL Server 2005

  - by BradyKelly

  I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

  Read the article

• How to avoid lftp Certificate verification error?

  - by pattulus

  I'm trying to get my Pelican blog working. It uses lftp to transfer the actual blog to ones server, but I always get an error: mirror: Fatal error: Certificate verification: subjectAltName does not match ‘blogname.com’ I think lftp is checking the SSL and the quick setup of Pelican just forgot to include that I don't have SSL on my FTP. This is the code in Pelican's Makefile: ftp_upload: $(OUTPUTDIR)/index.html lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" which renders in terminal as: lftp ftp://[email protected] -e "mirror -R /Volumes/HD/Users/me/Test/output /myblog_directory ; quit" What I managed so far is, denying the SSL check by changing the Makefile to: lftp ftp://$(FTP_USER)@$(FTP_HOST) -e "set ftp:ssl-allow no" "mirror -R $(OUTPUTDIR) $(FTP_TARGET_DIR) ; quit" Due to my incorrect implementation I get logged in correctly (lftp [email protected]:~>) but the one line feature doesn't work anymore and I have to enter the mirror command by hand: mirror -R /Volumes/HD/Users/me/Test/output/ /myblog_directory This works without an error and timeout. The question is how to do this with a one liner. In addition I tried: set ssl:verify-certificate/ftp.myblog.com no This trick to disable certificate verification in lftp: $ cat ~/.lftp/rc set ssl:verify-certificate no However, it seems there is no "rc" folder in my lftp directory - so this prompt has no chance to work.

  Read the article

• Trying to run chrooted suPHP with UserDir, getting 500 server error

  - by Greg Antowski

  I've managed to get suPHP working fine with UserDir (i.e. PHP files run from the /home/$username/public_html) directory, but I can't get it to work when I chroot it to the user's home directory. I've been following this guide: http://compilefailure.blogspot.co.nz/2011/09/suphp-chroot-gotchas.html And adapting it to my needs. I'm not creating vhosts, I just want PHP scripts to be jailed to the user's home directory. I've gotten to the part where you use makejail and set up a symlink. However even with the symlink set up correctly, PHP scripts won't run. This is what's shown in the Apache error log: SoftException in Application.cpp:537: Could not execute script "/home/jimmy/public_html/test.php" [error] [client 127.0.0.1] Caused by SystemException in API_Linux.cpp:444: execve() for program "/usr/bin/php-cgi" failed: No such file or directory The thing is, if I try running either of the following commands in the terminal it works without any issues: /home/jimmy/usr/bin/php-cgi /home/jimmy/public_html/test.php /usr/bin/php-cgi /home/jimmy/public_html/test.php I've been trying for hours to get this going and documentation for this kind of stuff is almost non-existent. If anyone could help me out with this, I'd be extremely grateful.

  Read the article

• Remote App Authentication Error (Code:0x507)

  - by CMK

  Hi I'm trying to get RDP services running with Windows 2008 R2. I'm at a WINXP SP3 client that was modified to run RDP with NLA. When I start the client connect to the local DC and get an authentification error (Code 0x507). I've already done the following: • Server Setup to run as a standalone local "DC" to provide Terminal services to a single application. Remote Desktop Session Host CAL License is running & operational, RD Gateway Manager w/ Local Server RAP & CAP running NLA & operational etc..... Server has NLA & temporary use of port 3389 (which is directly connected to and accessible from the internet (I am planning to change the port to 443, but want to get the current system running first). • XP Client(s): RDP-Version on win xp clients is 6.1 If had SP2, then added SP3 and edited the registry settings to allow NLA, by: Click Start, click Run, type regedit, and then press ENTER. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\Lsa In the details pane, right-click Security Packages, and then click Modify. In the Value data box, type tspkg. Leave any data that is specific to other SSPs, and then click OK. In the navigation pane, locate and then click the following registry subkey: HKEY_LOCAL_MACHINE \SYSTEM\CurrentControlSet\Control\SecurityProviders In the details pane, right-click SecurityProviders, and then click Modify. In the Value data box, type credssp.dll. Leave any data that is specific to other SSPs, and then click OK. Exit Registry Editor. Restart the computer.

  Read the article

• Firebird 2.1: gfix -online returns "database shutdown"

  - by darvids0n

  Hey all. Googling this one hasn't made a bit of difference, unfortunately, as most results specify the syntax for onlining a database after using gfix -shut -force 30 (or any other number of seconds) as gfix -online dbname, and I have run gfix -online dbname with and without login credentials for the DB in question. The message that I get is: database dbname shutdown Which is fine, except that I want to bring it online now. It's out of the question to close fbserver.exe (running on a Windows box, afaik it's Classic Server 2.1.1 but it may be Super) since we have other databases running off of that which need almost 24/7 uptime. The message from doing another gfix -shut -force or -attach or -tran is invalid shutdown mode for dbname which appears to match with the documentation of what happens if the database is already fully shut down. Ideas and input greatly appreciated, especially since at the moment time is a factor for me. Thanks! EDIT: The whole reason I shut down the DB is to clear out "active" transactions which were linked to a specific IP address, and that computer is my dev terminal (actually a virtual machine where I develop frontends for the database software) but I had no processes connecting to the database at the time. They looked like orphaned transactions to me, and they weren't in limbo afaik. Running a manual sweep didn't clear them out, deleting the rows from MON$STATEMENTS didn't work even though Firebird 2.1 supposedly supports cancelling queries that way. My last resort was to "restart" the database, hence the above issue.

  Read the article

• Error cloning gitosis-admin on new setup

  - by michaelmior

  I have the following in my gitosis.conf. (Created via gitsosis-init < id_rsa.pub with the key from my laptop) [gitosis] loglevel = DEBUG [group gitosis-admin] writable = gitosis-admin members = michael@laptop When I try git clone git@SERVER:gitsos-admin.git, I get the following errors: Initialized empty Git repository in /home/michael/gitsos-admin/.git/ DEBUG:gitosis.serve.main:Got command "git-upload-pack 'gitsos-admin.git'" DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'writable' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'writeable' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' DEBUG:gitosis.access.haveAccess:Access check for 'michael@laptop' as 'readonly' on 'gitsos-admin.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'gitsos-admin.git', new value 'gitsos-admin' DEBUG:gitosis.group.getMembership:found 'michael@laptop' in 'gitosis-admin' ERROR:gitosis.serve.main:Repository read access denied fatal: The remote end hung up unexpectedly I know my key is being accepted because I have tried logging in via SSH and although a terminal won't be allocated, the authorization works.

  Read the article

• getting a pyserial not loaded error

  - by skinnyTOD

  I'm getting a "pyserial not loaded" error with the python script fragment below (running OSX 10.7.4). I'm trying to run a python app called Myro for controlling the Parallax Scribbler2 robot - figured it would be a fun way to learn a bit of Python - but I'm not getting out of the gate here. I've searched out all the Myro help docs but like a lot in-progress open source programs, they are a moving target and conflicting, out of date, or not very specific about OSX. I have MacPorts installed and installed py27-serial without error. MacPorts lists the python versions I have installed, along with the active version: Available versions for python: none python24 python25 python25-apple python26 python26-apple python27 python27-apple (active) python32 Perhaps stuff is getting installed in the wrong places or my PATH is wrong (I don't much know what I am doing in Terminal and have probably screwed something up). Trying to find out about my sys.path - here's what I get: import sys sys.path ['', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python27.zip', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-darwin', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac/lib-scriptpackages', '/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-tk', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-old', '/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload', '/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/PyObjC', '/Library/Python/2.7/site-packages'] Is that a mess? Can I fix it? Anyway, thanks for reading this far. Here's the python bit that is throwing the error. The error occurs on 'try import serial'. # Global variable robot, to set SerialPort() robot = None pythonVer = "?" rbString = None ptString = None statusText = None # Now, let's import things import urllib import tempfile import os, sys, time try: import serial except: print("WARNING: pyserial not loaded: can't upgrade!") sys.exit() try: input = raw_input # Python 2.x except: pass # Python 3 and better, input is defined try: from tkinter import * pythonver = "3" except: try: from Tkinter import * pythonver = "2" except: pythonver = "?"

  Read the article

• BSOD Before Windows Will Loads - Graphics Related

  - by Brian

  Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

  Read the article

• ssh tunnel - bind: Cannot assign requested address

  - by JosephK

  Trying to create a socks (-D) ssh tunnel - Linux box to Linux box (both centos): sshd running on remote side ok. From local machine we do / see this: ssh -D 1080 [email protected]. [email protected]'s password: bind: Cannot assign requested address (where 8.8.8.8 is really my server's IP and 'user' is my real username) I am logged into the remote side in this terminal-window. I can verify that the local port was unused prior to this command, and then used by an ssh process, after the command, via: netstat -lnp | grep 1080 So, unlike most googled-responses with this error, the problem would not seem to be the loopback interface assignment. If I try to use this tunnel with a mail client, the local-side permits the attempt (no 'proxy-failed' error), but no data / reply is returned. On the remote side, I do have "PermitTunnel yes" in my sshd_config (though 'yes' should be the default, anyway). Ideas or Clues? Here is the relevant debug-output OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * .... debug1: Authentication succeeded (password). debug1: Local connections to LOCALHOST:1080 forwarded to remote address socks:0 debug1: Local forwarding listening on 127.0.0.1 port 1080. debug1: channel 0: new [port listener] debug1: Local forwarding listening on ::1 port 1080. bind: Cannot assign requested address debug1: channel 1: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_US.utf8 Other clue: If I run a Virtual Box on the client running Windows, open a tunnel with putty in that box, that tunnel, to the same remote server, works.

  Read the article

• How do I start nginx on port 80 at OS X login?

  - by Bryson

  I installed Nginx using homebrew and after completing the installation the following message was displayed: In the interest of allowing you to run `nginx` without `sudo`, the default port is set to localhost:8080. If you want to host pages on your local machine to the public, you should change that to localhost:80, and run `sudo nginx`. You'll need to turn off any other web servers running port 80, of course. You can start nginx automatically on login running as your user with: mkdir -p ~/Library/LaunchAgents cp #{prefix}/org.nginx.nginx.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/org.nginx.nginx.plist Though note that if running as your user, the launch agent will fail if you try to use a port below 1024 (such as http's default of 80.) But I want Nginx, on port 80, running at login and I don't want to have to open terminal and type in sudo nginx to do it. I want it to load from a plist file like Redis and PostgreSQL do. I moved the plist to /Library/LaunchAgents/ from the user folder equivalent and changed its ownership, also tried setting the user directive in the nginx.conf file and still the same error message in Console.app: nginx: [emerg] bind() to 0.0.0.0:80 failed (13: Permission denied) (along with another message telling me that since nginx was being run without super-user privileges, the user directive was being ignored)

  Read the article

• "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

  - by rzetterberg

  I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >