Search Results

Search found 6448 results on 258 pages for 'pdf reader'.

Page 243/258 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• SQL SERVER – Weekly Series – Memory Lane – #048

  - by Pinal Dave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Order of Result Set of SELECT Statement on Clustered Indexed Table When ORDER BY is Not Used Above theory is true in most of the cases. However SQL Server does not use that logic when returning the resultset. SQL Server always returns the resultset which it can return fastest.In most of the cases the resultset which can be returned fastest is the resultset which is returned using clustered index. Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT One of the Jr. Developer asked me this question (What will be the Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT?) while I was rushing to an important meeting. I was getting late so I asked him to talk with his Application Tech Lead. When I came back from meeting both of them were looking for me. They said they are confused. I quickly wrote down following example for them. 2008 SQL SERVER – Guidelines and Coding Standards Complete List Download Coding standards and guidelines are very important for any developer on the path of a successful career. A coding standard is a set of guidelines, rules and regulations on how to write code. Coding standards should be flexible enough or should take care of the situation where they should not prevent best practices for coding. They are basically the guidelines that one should follow for better understanding. Download Guidelines and Coding Standards complete List Download Get Answer in Float When Dividing of Two Integer Many times we have requirements of some calculations amongst different fields in Tables. One of the software developers here was trying to calculate some fields having integer values and divide it which gave incorrect results in integer where accurate results including decimals was expected. Puzzle – Computed Columns Datatype Explanation SQL Server automatically does a cast to the data type having the highest precedence. So the result of INT and INT will be INT, but INT and FLOAT will be FLOAT because FLOAT has a higher precedence. If you want a different data type, you need to do an EXPLICIT cast. Renaming SP is Not Good Idea – Renaming Stored Procedure Does Not Update sys.procedures I have written many articles about renaming a tables, columns and procedures SQL SERVER – How to Rename a Column Name or Table Name, here I found something interesting about renaming the stored procedures and felt like sharing it with you all. The interesting fact is that when we rename a stored procedure using SP_Rename command, the Stored Procedure is successfully renamed. But when we try to test the procedure using sp_helptext, the procedure will be having the old name instead of new names. 2009 Insert Values of Stored Procedure in Table – Use Table Valued Function It is clear from the result set that , where I have converted stored procedure logic into the table valued function, is much better in terms of logic as it saves a large number of operations. However, this option should be used carefully. The performance of the stored procedure is “usually” better than that of functions. Interesting Observation – Index on Index View Used in Similar Query Recently, I was working on an optimization project for one of the largest organizations. While working on one of the queries, we came across a very interesting observation. We found that there was a query on the base table and when the query was run, it used the index, which did not exist in the base table. On careful examination, we found that the query was using the index that was on another view. This was very interesting as I have personally never experienced a scenario like this. In simple words, “Query on the base table can use the index created on the indexed view of the same base table.” Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries Working with SQL Server has never seemed to be monotonous – no matter how long one has worked with it. Quite often, I come across some excellent comments that I feel like acknowledging them as blog posts. Recently, I wrote an article on SQL SERVER – Execution Plan and Results of Aggregate Concatenation Queries Depend Upon Expression Location, which is well received in the community. 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 2011 Startup Parameters Easy to Configure If you are a regular reader of this blog, you must be aware that I have written about SQL Server Denali recently. Here is the quickest way to reach into the screen where we can change the startup parameters. Go to SQL Server Configuration Manager >> SQL Server Services >> Right Click on the Server >> Properties >> Startup Parameters 2012 Validating Unique Columnname Across Whole Database I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. For example “Our business requirement is when we add new column we want it unique across current database.” Read the solution to this strange request in this blog post. Excel Losing Decimal Values When Value Pasted from SSMS ResultSet It is very common when users are coping the resultset to Excel, the floating point or decimals are missed. The solution is very much simple and it requires a small adjustment in the Excel. By default Excel is very smart and when it detects the value which is getting pasted is numeric it changes the column format to accommodate that. Basic Calculation and PEMDAS Order of Operation Read this interesting blog post for fantastic conversation about the subject. Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video http://www.youtube.com/watch?v=x_-3tLqTRv0 Delete From Multiple Table – Update Multiple Table in Single Statement There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? Read the answer in the blog post. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Dynamic Bursting ... no really!

  - by Tim Dexter

  If any of you have seen me or my colleagues present BI Publisher to you then we have hopefully mentioned 'bursting.' You may have even seen a demo where we talk about being able to take a batch of data, say invoices. Then split them by some criteria, say customer id; format them with a template; generate the output and then deliver the documents to the recipients with a click. We and especially I, always say this can be completely dynamic! By this I mean, that you could store customer preferences in a database. What layout would each customer like; what output format they would like and how they would like the document delivered. We (I) talk a good talk, but typically don't do the walk in a demo. We hard code everything in the bursting query or bursting control file to get the concept across. But no more peeps! I have finally put together a dynamic bursting demo! Its been minutes in the making but its been tough to find those minutes! Read on ... It's nothing amazing in terms of making the burst dynamic. I created a CUSTOMER_PREFS table with some simple UI in an APEX application so that I can maintain their requirements. In EBS you have descriptive flexfields that could do the same thing or probably even 'contact' fields to store most of the info. Here's my table structure: Name                           Type ------------------------------ -------- CUSTOMER_ID                    NUMBER(6) TEMPLATE_TYPE                  VARCHAR2(20) TEMPLATE_NAME                  VARCHAR2(120) OUTPUT_FORMAT                  VARCHAR2(20) DELIVERY_CHANNEL               VARCHAR2(50) EMAIL                          VARCHAR2(255) FAX                            VARCHAR2(20) ATTACH                         VARCHAR2(20) FILE_LOC                       VARCHAR2(255) Simple enough right? Just need CUSTOMER_ID as the key for the bursting engine to join it to the customer data at burst time. I have not covered the full delivery options, just email, fax and file location. Remember, its a demo people :0) However the principal is exactly the same for each delivery type. They each have a set of attributes that need to be provided and you will need to handle that in your bursting query. On a side note, in EBS, you use a bursting control file, you can apply the same principals that I'm laying out here you just need to get the customer bursting info into the XML data stream so that you can refer to it in the control file using XPATH expressions. Next, we need to look up what attributes or parameters are required for each delivery method. that can be found in the documentation here.  Now we know the combinations of parameters and delivery methods we can construct the query using a series a decode statements: select distinct cp.customer_id "KEY", cp.template_name TEMPLATE, cp.template_type TEMPLATE_FORMAT, 'en-US' LOCALE, cp.output_format OUTPUT_FORMAT, 'false' SAVE_FORMAT, cp.delivery_channel DEL_CHANNEL, decode(cp.delivery_channel,'FILE', cp.file_loc , 'EMAIL', cp.email , 'FAX', cp.fax) PARAMETER1, decode(cp.delivery_channel,'FILE', c.cust_last_name||'_orders.pdf' ,'EMAIL','[email protected]' ,'FAX', 'faxserver.com') PARAMETER2, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX', null) PARAMETER3, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Your current orders' ,'FAX',NULL) PARAMETER4, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','Please find attached a copy of your current orders with BI Publisher, Inc' ,'FAX',NULL) PARAMETER5, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','false' ,'FAX',NULL) PARAMETER6, decode(cp.delivery_channel,'FILE',NULL ,'EMAIL','[email protected]' ,'FAX',NULL) PARAMETER7 from cust_prefs cp, customers c, orders_view ov where cp.customer_id = c.customer_id and cp.customer_id = ov.customer_id order by cp.customer_id Pretty straightforward, just need to test, test, test, the query and ensure it's bringing back the correct data based on each customers preferences. Notice the NULL values for parameters that are not relevant for a given delivery channel. You should end up with bursting control data that the bursting engine can use:  Now, your users can run the burst and documents will be formatted, generated and delivered based on the customer prefs. If you're interested in the example, I have used the sample OE schema data for the base report. The report files and CUST_PREFS table are zipped up here. The zip contains the data model (.xdmz), the report and templates (.xdoz) and the sql scripts to create and load data to the CUST_PREFS table.  Once you load the report into the catalog, you'll need to create the OE data connection and point the data model at it. You'll probably need to re-point the report to the data model too. Happy Bursting!

  Read the article

• Kill a tree, save your website? Content strategy in action, part III

  - by Roger Hart

  A lot has been written about how driving content strategy from within an organisation is hard. And that's true. Red Gate is pretty receptive to new ideas, so although I've not had a total walk in the park, it's been a hike with charming scenery. But I'm one of the lucky ones. Lots of people are involved in content, and depending on your organisation some of those people might be the kind who'll gleefully call themselves "stakeholders". People holding a stake generally want to stick it through something's heart and bury it at a crossroads. Winning them over is not always easy. (Richard Ingram has made a nice visual summary of how this can feel - Content strategy Snakes & ladders - pdf ) So yes, a lot of content strategy advocates are having a hard time. And sure, we've got a nice opportunity to get together and have a hug and a cry, but in the interim we could use a hand. What to do? My preferred approach is, I'll confess, brutal. I'd like nothing so much as to take a scorched earth approach to our website. Burn it, salt the ground, and build the new one right: focusing on clearly delineated business and user content goals, and instrumented so we can tell if we're doing it right. I'm never getting buy-in for that, but a boy can dream. So how about just getting buy-in for some small, tenable improvements? Easier, but still non-trivial. I sat down for a chat with our marketing and design guys. It seemed like a good place to start, even if they weren't up for my "Ctrl-A + Delete"  solution. We talked through some of this stuff, and we pretty much agreed that our content is a bit more broken than we'd ideally like. But to get everybody on board, the problems needed visibility. Doing a visual content inventory Print out the internet. Make a Wall Of Content. Seriously. If you've already done a content inventory, you know your architecture, and you know the scale of the problem. But it's quite likely that very few other people do. So make it big and visual. I'm going to carbon hell, but it seems to be working. This morning, I printed out a tiny, tiny part of our website: the non-support content pertaining to SQL Compare I made big, visual, A3 blowups of each page, and covered a wall with them. A page per web page, spread over something like 6M x 2M, with metrics, right in front of people. Even if nobody reads it (and they are doing) the sheer scale is shocking. 53 pages, all told. Some are redundant, some outdated, some trivial, a few fantastic, and frighteningly many that are great ideas delivered not-quite-right. You have to stand quite far away to get it all in your field of vision. For a lot of today, a whole bunch of folks have been gawping in amazement, talking each other through it, peering at the details, and generally getting excited about content. Developers, sales guys, our CEO, the marketing folks - they're engaged. Will it last? I make no promises. But this sort of wave of interest is vital to getting a content strategy project kicked off. While the content strategist is a saucer-eyed orphan in the cupboard under the stairs, they're not getting a whole lot done. Of course, just printing the site won't necessarily cut it. You have to know your content, and be able to talk about it. Ideally, you'll also have page view and time-on-page metrics. One of the most powerful things you can do is, when people are staring at your wall of content, ask them what they think half of it is for. Pretty soon, you've made a case for content strategy. We're also going to get folks to mark it up - cover it with notes and post-its, let us know how they feel about our content. I'll be blogging about how that goes, but it's exciting. Different business functions have different needs from content, so the more exposure the content gets, and the more feedback, the more you know about those needs. Fingers crossed for awesome.

  Read the article

• In Case You Weren’t There: Blogwell NYC

  - by Mike Stiles

  0 0 1 1009 5755 Vitrue 47 13 6751 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman";} Your roving reporter roved out to another one of Socialmedia.org’s fantastic Blogwell events, this time in NYC. As Central Park and incredible weather beckoned, some of the biggest brand names in the world gathered to talk about how they’re incorporating social into marketing and CRM, as well as extending social across their entire organizations internally. Below we present a collection of the live tweets from many of the key sessions GE @generalelectricJon Lombardo, Leader of Social Media COE How GE builds and extends emotional connections with consumers around health and reaps the benefits of increased brand equity in the process. GE has a social platform around Healthyimagination to create better health for people. If you and a friend are trying to get healthy together, you’ll do better. Health is inherently. Get health challenges via Facebook and share with friends to achieve goals together. They’re creating an emotional connection around the health context. You don’t influence people at large. Your sphere of real influence is around 5-10 people. They find relevant conversations about health on Twitter and engage sounding like a friend, not a brand. Why would people share on behalf of a brand? Because you tapped into an activity and emotion they’re already having. To create better habits in health, GE gave away inexpensive, relevant gifts related to their goals. Create the context, give the relevant gift, get social acknowledgment for giving it. What you get when you get acknowledgment for your engagement and gift is user generated microcontent. GE got 12,000 unique users engaged and 1400 organic posts with the healthy gift campaign. The Dow Chemical Company @DowChemicalAbby Klanecky, Director of Digital & Social Media Learn how Dow Chemical is finding, training, and empowering their scientists to be their storytellers in social media. There are 1m jobs coming open in science. Only 200k are qualified for them. Dow Chemical wanted to use social to attract and talk to scientists. Dow Chemical decided to use real scientists as their storytellers. Scientists are incredibly passionate, the key ingredient of a great storyteller. Step 1 was getting scientists to focus on a few platforms, blog, Twitter, LinkedIn. Dow Chemical social flow is Core Digital Team - #CMs – ambassadors – advocates. The scientists were trained in social etiquette via practice scenarios. It’s not just about sales. It’s about growing influence and the business. Dow Chemical trained about 100 scientists, 55 are active and there’s a waiting list for the next sessions. In person social training produced faster results and better participation. Sometimes you have to tell pieces of the story instead of selling your execs on the whole vision. Social Media Ethics Briefing: Staying Out of TroubleAndy Sernovitz, CEO @SocialMediaOrg How do we get people to share our message for us? We have to have their trust. The difference between being honest and being sleazy is disclosure. Disclosure does not hurt the effectiveness of your marketing. No one will get mad if you tell them up front you’re a paid spokesperson for a company. It’s a legal requirement by the FTC, it’s the law, to disclose if you’re being paid for an endorsement. Require disclosure and truthfulness in all your social media outreach. Don’t lie to people. Monitor the conversation and correct misstatements. Create social media policies and training programs. If you want to stay safe, never pay cash for social media. Money changes everything. As soon as you pay, it’s not social media, it’s advertising. Disclosure, to the feds, means clear, conspicuous, and understandable to the average reader. This phrase will keep you in the clear, “I work for ___ and this is my personal opinion.” Who are you? Were you paid? Are you giving an honest opinion based on a real experience? You as a brand are responsible for what an agency or employee or contactor does in your behalf. SocialMedia.org makes available a Disclosure Best Practices Toolkit. Socialmedia.org/disclosure. The point is to not ethically mess up and taint social media as happened to e-mail. Not only is the FTC cracking down, so is Google and Facebook. Visa @VisaNewsLucas Mast, Senior Business Leader, Global Corporate Social Media Visa built a mobile studio for the Olympics for execs and athletes. They wanted to do postcard style real time coverage of Visa’s Olympics sponsorships, and on a shoestring. Challenges included Olympic rules, difficulty getting interviews, time zone trouble, and resourcing. Another problem was they got bogged down with their own internal approval processes. Despite all the restrictions, they created and published a variety of and fair amount of content. They amassed 1000+ views of videos posted to the Visa Communication YouTube channel. Less corporate content yields more interest from media outlets and bloggers. They did real world video demos of how their products work in the field vs. an exec doing a demo in a studio. Don’t make exec interview videos dull and corporate. Keep answers short, shoot it in an interesting place, do takes until they’re comfortable and natural. Not everything will work. Not everything will get a retweet. But like the lottery, you can’t win if you don’t play. Promoting content is as important as creating it. McGraw-Hill Companies @McGrawHillCosPatrick Durando, Senior Director of Global New Media McGraw-Hill has 26,000 employees. McGraw-Hill created a social intranet called Buzz. Intranets create operational efficiency, help product dev, facilitate crowdsourcing, and breaks down geo silos. Intranets help with talent development, acquisition, retention. They replaced the corporate directory with their own version of LinkedIn. The company intranet has really cut down on the use of email. Long email threats become organized, permanent social discussions. The intranet is particularly useful in HR for researching and getting answers surrounding benefits and policies. Using a profile on your company intranet can establish and promote your internal professional brand. If you’re going to make an intranet, it has to look great, work great, and employees are going have to want to go there. You can’t order them to like it. 

  Read the article

• HPCM 11.1.2.2.x - How to find data in an HPCM Standard Costing database

  - by Jane Story

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} When working with a Hyperion Profitability and Cost Management (HPCM) Standard Costing application, there can often be a requirement to check data or allocated results using reporting tools e.g Smartview. To do this, you are retrieving data directly from the Essbase databases related to your HPCM model. For information, running reports is covered in Chapter 9 of the HPCM User documentation. The aim of this blog is to provide a quick guide to finding this data for reporting in the HPCM generated Essbase database in v11.1.2.2.x of HPCM. In order to retrieve data from an HPCM generated Essbase database, it is important to understand each of the following dimensions in the Essbase database and where data is located within them: Measures dimension – identifies Measures AllocationType dimension – identifies Direct Allocation Data or Genealogy Allocation data Point Of View (POV) dimensions – there must be at least one, maximum of four. Business dimensions: Stage Business dimensions – these will be identified by the Stage prefix. Intra-Stage dimension – these will be identified by the _Intra suffix. Essbase outlines and reporting is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s02.html For additional details on reporting measures, please review this section of the documentation:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/apas03.html Reporting requirements in HPCM quite often start with identifying non balanced items in the Stage Balancing report. The following documentation link provides help with identifying some of the items within the Stage Balancing report:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/generatestagebalancing.html The following are some types of data upon which you may want to report: Stage Data: Direct Input Assigned Input Data Assigned Output Data Idle Cost/Revenue Unassigned Cost/Revenue Over Driven Cost/Revenue Direct Allocation Data Genealogy Allocation Data Stage Data Stage Data consists of: Direct Input i.e. input data, the starting point of your allocation e.g. in Stage 1 Assigned Input Data i.e. the cost/revenue received from a prior stage (i.e. stage 2 and higher). Assigned Output Data i.e. for each stage, the data that will be assigned forward is assigned post stage data. Reporting on this data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s03.html Dimension Selection Measures Direct Input: CostInput RevenueInput Assigned Input (from previous stages): CostReceivedPriorStage RevenueReceivedPriorStage Assigned Output (to subsequent stages): CostAssignedPostStage RevenueAssignedPostStage AllocationType DirectAllocation POV One member from each POV dimension Stage Business Dimensions Any members for the stage business dimensions for the stage you wish to see the Stage data for. All other Dimensions NoMember Idle/Unassigned/OverDriven To view Idle, Unassigned or Overdriven Costs/Revenue, first select which stage for which you want to view this data. If multiple Stages have unassigned/idle, resolve the earliest first and re-run the calculation as differences in early stages will create unassigned/idle in later stages. Dimension Selection Measures Idle: IdleCost IdleRevenue Unassigned: UnAssignedCost UnAssignedRevenue Overdriven: OverDrivenCost OverDrivenRevenue AllocationType DirectAllocation POV One member from each POV dimension Dimensions in the Stage with Unassigned/ Idle/OverDriven Cost All the Stage Business dimensions in the Stage with Unassigned/Idle/Overdriven. Zoom in on each dimension to find the individual members to find which members have Unassigned/Idle/OverDriven data. All other Dimensions NoMember Direct Allocation Data Direct allocation data shows the data received by a destination intersection from a source intersection where a direct assignment(s) exists. Reporting on direct allocation data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s04.html You would select the following to report direct allocation data Dimension Selection Measures CostReceivedPriorStage AllocationType DirectAllocation POV One member from each POV dimension Stage Business Dimensions Any members for the SOURCE stage business dimensions and the DESTINATION stage business dimensions for the direct allocations for the stage you wish to report on. All other Dimensions NoMember Genealogy Allocation Data Genealogy allocation data shows the indirect data relationships between stages. Genealogy calculations run in the HPCM Reporting database only. Reporting on genealogy data is explained in the documentation here:http://docs.oracle.com/cd/E17236_01/epm.1112/hpm_user/ch09s05.html Dimension Selection Measures CostReceivedPriorStage AllocationType GenealogyAllocation (IndirectAllocation in 11.1.2.1 and prior versions) POV One member from each POV dimension Stage Business Dimensions Any stage business dimension members from the STARTING stage in Genealogy Any stage business dimension members from the INTERMEDIATE stage(s) in Genealogy Any stage business dimension members from the ENDING stage in Genealogy All other Dimensions NoMember Notes If you still don’t see data after checking the above, please check the following Check the calculation has been run. Here are couple of indicators that might help them with that. Note the size of essbase cube before and after calculations ensure that a calculation was run against the database you are examing. Export the essbase data to a text file to confirm that some data exists. Examine the date and time on task area to see when, if any, calculations were run and what choices were used (e.g. Genealogy choices) If data does not exist in places where they are expecting, it could be that No calculations/genealogy were run No calculations were successfully run The model/data at feeder location were either absent or incompatible, resulting in no allocation e.g no driver data. Smartview Invocation from HPCM From version 11.1.2.2.350 of HPCM (this version will be GA shortly), it is possible to directly invoke Smartview from HPCM. There is guided navigation before the Smartview invocation and it is then possible to see the selected value(s) in SmartView. Click to Download HPCM 11.1.2.2.x - How to find data in an HPCM Standard Costing database (Right click or option-click the link and choose "Save As..." to download this pdf file)

  Read the article

• Massive Silverlight Giveaway! DevExpress , Syncfusion, Crypto Obfuscator and SL Spy!

  - by mbcrump

  Oh my, have we grown! Maybe I should change the name to Multiple Silverlight Giveaways. So far, my Silverlight giveaways have been such a success that I’m going to be able to give away more than one Silverlight product every month. Last month, we gave away 3 great products. 1) ComponentOne Silverlight Controls 2)  ComponentOne XAP Optimizer (with obfuscation) and 3) Silverlight Spy. This month, we will give away 4 great Silverlight products and have 4 different winners. This way the Silverlight community can grow with more than just one person winning all the prizes. This month we will be giving away: DevExpress Silverlight Controls – Over 50+ Silverlight Controls Syncfusion User Interface Edition - Create stunning line of business silverlight applications with a wide range of components including a high performance grid, docking manager, chart, gauge, scheduler and much more. Crypto Obfuscator – Works for all .NET including Silverlight/Windows Phone 7. Silverlight Spy – provides a license EVERY month for this giveaway. ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of one of the products listed above! 4 winners will be announced on April 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. – Use Google Reader, email or whatever is best for you.  Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump . Register here: http://mcrump.me/fTSmB8 ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit each of the vendors sites because they made this possible. MichaelCrump.Net provides Silverlight Giveaways every month. You can also see the latest giveaway by bookmarking http://giveaways.michaelcrump.net . ---------------------------------------------------------------------------------------------------------------------------------------------------------- DevExpress Silverlight Controls Let’s take a quick look at some of the software that is provided in this giveaway. Before we get started with the Silverlight Controls, here is a couple of links to bookmark for the DevExpress Silverlight Controls: The Live Demos of the Silverlight Controls is located here. Great Video Tutorials of the Silverlight Controls are here. One thing that I liked about the DevExpress is how easy it was to find demos of each control. After you install the controls the following Program Group appears complete with “demos” that include full-source.   So, the first question that you may ask is, “What is included?” Here is the official list below. I wanted to show several of the controls that I think developers will use the most. The Book – Very rich animation between switching pages. Very easy to add your own images and custom text. The Menu – This is another control that just looked great. You can easily add images to the menu items with a few lines of XAML. The Window / Dialog Box – You can use this control to make a very beautiful “Wizard” to help your users navigate between pages. This is useful in setup or installation. Calculator – This would be useful for any type of Banking app. Also a first that I’ve seen from a 3rd party Control company. DatePicker – This controls feels a lot smoother than the one provided by Microsoft. It also provides the ability to “Clear” the selection. Overall the DevExpress Silverlight Controls feature a lot of quality controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. If you win the contest you can simply enter your registration key and continue using the product without reinstalling. Syncfusion User Interface Edition Before we get started with the Syncfusion User Interface Edition, here is a couple of links to bookmark. The Live Demos can be found here. You can download a demo of it now at http://www.syncfusion.com/downloads/evalstart. After you install the Syncfusion, you can view the dashboard to run locally installed samples. You may also download the documentation to your local machine if needed. Since the name of the package is “User Interface Edition”, I decided to share several samples that struck me as “awesome”. Dashboard Gauges – I was very impressed with the various gauges they have included. The digital clock also looks very impressive. Diagram – The diagrams are also very easy to build. In the sample project below you can drag/drop the shapes onto the content pane. More complex lines like the Bezier lines are also easy to create using Syncfusion. Scheduling – Another strong component was the Scheduling with built-in support for Themes. Tools – If all of that wasn’t enough, it also comes with a nice pack of essential tools. Syncfusion has a nice variety of Silverlight Controls that you should check out. You can go ahead and download a trial version of it right now by clicking here. Crypto Obfuscator The following feature set is what is important to me in an Obfuscator since I am a Silverlight/WP7 Developer: And thankfully this is what you get in Crypto Obfuscator. You can download a trial version right now if you want to go ahead and play with it. Let’s spend a few moments taking a look at the application. After you have installed Crypto Obfuscator you will see the following screen: After you click on Assemblies you have the option to add your .XAP file in: I went ahead and loaded my .xap file from a Silverlight Application. At this point, you can simply save your project and hit “Obfuscate” and your done. You don’t have to mess with any of the other settings if you don’t want too. Of course, you can change the settings and add obfuscation rules, watermarks and signing if you wish.  After Obfuscation, it looks like this in .NET Reflector: I was trying to browse through methods and it actually crashed Reflector. This confirms the level of protection the obfuscator is providing. If this were a commercial application that my team built, I would have a huge smile on my face right now. Crypto Obfuscator is a great product and I hope you will spend the time learning more about it. Silverlight Spy Silverlight Spy is a runtime inspector tool that will tell you pretty much everything that is going on with the application. Basically, you give it a URL that contains a Silverlight application and you can explore the element tree, events, xaml and so much more. This has already been reviewed on MichaelCrump.net. _________________________________________________________________________________________ Thanks for reading and don’t forget to leave a comment below in order to win one of the four prizes available! Subscribe to my feed

  Read the article

• How to Use RDA to Generate WLS Thread Dumps At Specified Intervals?

  - by Daniel Mortimer

  Introduction There are many ways to generate a thread dump of a WebLogic Managed Server. For example, take a look at: Taking Thread Dumps - [an excellent blog post on the Middleware Magic site]or  Different ways to take thread dumps in WebLogic Server (Document 1098691.1) There is another method - use Remote Diagnostic Agent! The solution described below is not documented, but it is relatively straightforward to execute. One advantage of using RDA to collect the thread dumps is RDA will also collect configuration, log files, network, system, performance information at the same time. Instructions 1. Not familiar with Remote Diagnostic Agent? Take a look at my previous blog "Resolve SRs Faster Using RDA - Find the Right Profile" 2. Choose a profile, which includes the WebLogic Server data collection modules (for example the profile "WebLogicServer"). At RDA setup time you should see the prompt below: ------------------------------------------------------------------------------- S301WLS: Collects Oracle WebLogic Server Information ------------------------------------------------------------------------------- Enter the location of the directory where the domains to analyze are located (For example in UNIX, <BEA Home>/user_projects/domains or <Middleware Home>/user_projects/domains) Hit 'Return' to accept the default (/oracle/11AS/Middleware/user_projects/domains) > For a successful WLS connection, ensure that the domain Admin Server is up and running. Data Collection Type:   1  Collect for a single server (offline mode)   2  Collect for a single server (using WLS connection)   3  Collect for multiple servers (using WLS connection) Enter the item number Hit 'Return' to accept the default (1) > 2 Choose option 2 or 3. Note: Collect for a single server or multiple servers using WLS connection means that RDA will attempt to connect to execute online WLST commands against the targeted server(s). The thread dumps are collected using the WLST function - "threadDumps()". If WLST cannot connect to the managed server, RDA will proceed to collect other data and ignore the request to collect thread dumps. If in the final output you see no Thread Dump menu item, then it's likely that the managed server is in a state which prevents new connections to it. If faced with this scenario, you would have to employ alternative methods for collecting thread dumps. 3. The RDA setup will create a setup.cfg file in the RDA_HOME directory. Open this file in an editor. You will find the following parameters which govern the number of thread dumps and thread dump interval. #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=5000 The example lines above show the default settings. In other words, RDA will collect 10 thread dumps at 5000 millisecond (5 second) intervals. You may want to change this to something like: #N.Number of thread dumps to capture WREQ_THREAD_DUMP=10 #N.Thread dump interval WREQ_THREAD_DUMP_INTERVAL=30000 However, bear in mind, that such change will increase the total amount of time it takes for RDA to complete its run. 4. Once you are happy with the setup.cfg, run RDA. RDA will collect, render, generate and package all files in the output directory. 5. For ease of viewing, open up the RDA Start html file - "xxxx__start.htm". The thread dumps can be found under the WLST Collections for the target managed server(s). See screenshots belowScreenshot 1:RDA Start Page - Main Index Screenshot 2: Managed Server Sub Index Screenshot 3: WLST Collections Screenshot 4: Thread Dump Page - List of dump file links Screenshot 5: Thread Dump Dat File Link Additional Comment: A) You can view the thread dump files within the RDA Start Page framework, but most likely you will want to download the dat files for in-depth analysis via thread dump analysis tools such as: Thread Dump Analyzer -  Samurai - a GUI based tail , thread dump analysis tool If you are new to thread dump analysis - take a look at this recorded Support Advisor Webcast  Oracle WebLogic Server: Diagnosing Performance Issues through Java Thread Dumps[Slidedeck from webcast in PDF format]B) I have logged a couple of enhancement requests for the RDA Development Team to consider: Add timestamp to dump file links, dat filename and at the top of the body of the dat file Package the individual thread dumps in a zip so all dump files can be conveniently downloaded in one go.

  Read the article

• Exception Handling Differences Between 32/64 Bit

  - by Alois Kraus

  I do quite a bit of debugging .NET applications but from time to time I see things that are impossible (at a first look). I may ask you dear reader what your mental exception handling model is. Exception handling is easy after all right? Lets suppose the following code:         private void F1(object sender, EventArgs e)         {             try             {                 F2();             }             catch (Exception ex)             {                 throw new Exception("even worse Exception");             }           }           private void F2()         {             try             {                 F3();             }             finally             {                 throw new Exception("other exception");             }         }           private void F3()         {             throw new NotImplementedException();         }   What will the call stack look like when you break into the catch(Exception) clause in Windbg (32 and 64 bit on .NET 3.5 SP1)? The mental model I have is that when an exception is thrown the stack frames are unwound until the catch handler can execute. An exception does propagate the call chain upwards.   So when F3 does throw an exception the control flow will resume at the finally handler in F2 which does throw another exception hiding the original one (that is nasty) and then the new Exception will be catched in F1 where the catch handler is executed. So we should see in the catch handler in F1 as call stack only the F1 stack frame right? Well lets try it out in Windbg. For this I created a simple Windows Forms application with one button which does execute the F1 method in its click handler. When you compile the application for 64 bit and the catch handler is reached you will find with the following commands in Windbg   Load sos extension from the same path where mscorwks was loaded in the current process .loadby sos mscorwks   Beak on clr exceptions sxe clr   Continue execution g   Dump mixed call stack container C++  and .NET Stacks interleaved 0:000> !DumpStack OS Thread Id: 0x1d8 (0) Child-SP         RetAddr          Call Site 00000000002c88c0 000007fefa68f0bd KERNELBASE!RaiseException+0x39 00000000002c8990 000007fefac42ed0 mscorwks!RaiseTheExceptionInternalOnly+0x295 00000000002c8a60 000007ff005dd7f4 mscorwks!JIT_Throw+0x130 00000000002c8c10 000007fefa6942e1 WindowsFormsApplication1!WindowsFormsApplication1.Form1.F1(System.Object, System.EventArgs)+0xb4 00000000002c8c60 000007fefa661012 mscorwks!ExceptionTracker::CallHandler+0x145 00000000002c8d60 000007fefa711a72 mscorwks!ExceptionTracker::CallCatchHandler+0x9e 00000000002c8df0 0000000077b055cd mscorwks!ProcessCLRException+0x25e 00000000002c8e90 0000000077ae55f8 ntdll!RtlpExecuteHandlerForUnwind+0xd 00000000002c8ec0 000007fefa637c1a ntdll!RtlUnwindEx+0x539 00000000002c9560 000007fefa711a21 mscorwks!ClrUnwindEx+0x36 00000000002c9a70 0000000077b0554d mscorwks!ProcessCLRException+0x20d 00000000002c9b10 0000000077ae5d1c ntdll!RtlpExecuteHandlerForException+0xd 00000000002c9b40 0000000077b1fe48 ntdll!RtlDispatchException+0x3cb 00000000002ca220 000007fefdaeaa7d ntdll!KiUserExceptionDispatcher+0x2e 00000000002ca7e0 000007fefa68f0bd KERNELBASE!RaiseException+0x39 00000000002ca8b0 000007fefac42ed0 mscorwks!RaiseTheExceptionInternalOnly+0x295 00000000002ca980 000007ff005dd8df mscorwks!JIT_Throw+0x130 00000000002cab30 000007fefa6942e1 WindowsFormsApplication1!WindowsFormsApplication1.Form1.F2()+0x9f 00000000002cab80 000007fefa71b5b3 mscorwks!ExceptionTracker::CallHandler+0x145 00000000002cac80 000007fefa70dcd0 mscorwks!ExceptionTracker::ProcessManagedCallFrame+0x683 00000000002caed0 000007fefa7119af mscorwks!ExceptionTracker::ProcessOSExceptionNotification+0x430 00000000002cbd90 0000000077b055cd mscorwks!ProcessCLRException+0x19b 00000000002cbe30 0000000077ae55f8 ntdll!RtlpExecuteHandlerForUnwind+0xd 00000000002cbe60 000007fefa637c1a ntdll!RtlUnwindEx+0x539 00000000002cc500 000007fefa711a21 mscorwks!ClrUnwindEx+0x36 00000000002cca10 0000000077b0554d mscorwks!ProcessCLRException+0x20d 00000000002ccab0 0000000077ae5d1c ntdll!RtlpExecuteHandlerForException+0xd 00000000002ccae0 0000000077b1fe48 ntdll!RtlDispatchException+0x3cb 00000000002cd1c0 000007fefdaeaa7d ntdll!KiUserExceptionDispatcher+0x2e 00000000002cd780 000007fefa68f0bd KERNELBASE!RaiseException+0x39 00000000002cd850 000007fefac42ed0 mscorwks!RaiseTheExceptionInternalOnly+0x295 00000000002cd920 000007ff005dd968 mscorwks!JIT_Throw+0x130 00000000002cdad0 000007ff005dd875 WindowsFormsApplication1!WindowsFormsApplication1.Form1.F3()+0x48 00000000002cdb10 000007ff005dd786 WindowsFormsApplication1!WindowsFormsApplication1.Form1.F2()+0x35 00000000002cdb60 000007ff005dbe6a WindowsFormsApplication1!WindowsFormsApplication1.Form1.F1(System.Object, System.EventArgs)+0x46 00000000002cdbc0 000007ff005dd452 System_Windows_Forms!System.Windows.Forms.Control.OnClick(System.EventArgs)+0x5a   Hm okaaay. I see my method F1 two times in this call stack. Looks like we did get some recursion bug. But that can´t be given the obvious code above. Let´s try the same thing in a 32 bit process.  0:000> !DumpStack OS Thread Id: 0x33e4 (0) Current frame: KERNELBASE!RaiseException+0x58 ChildEBP RetAddr  Caller,Callee 0028ed38 767db727 KERNELBASE!RaiseException+0x58, calling ntdll!RtlRaiseException 0028ed4c 68b9008c mscorwks!Binder::RawGetClass+0x20, calling mscorwks!Module::LookupTypeDef 0028ed5c 68b904ff mscorwks!Binder::IsClass+0x23, calling mscorwks!Binder::RawGetClass 0028ed68 68bfb96f mscorwks!Binder::IsException+0x14, calling mscorwks!Binder::IsClass 0028ed78 68bfb996 mscorwks!IsExceptionOfType+0x23, calling mscorwks!Binder::IsException 0028ed80 68bfbb1c mscorwks!RaiseTheExceptionInternalOnly+0x2a8, calling KERNEL32!RaiseExceptionStub 0028eda8 68ba0713 mscorwks!Module::ResolveStringRef+0xe0, calling mscorwks!BaseDomain::GetStringObjRefPtrFromUnicodeString 0028edc8 68b91e8d mscorwks!SetObjectReferenceUnchecked+0x19 0028ede0 68c8e910 mscorwks!JIT_Throw+0xfc, calling mscorwks!RaiseTheExceptionInternalOnly 0028ee44 68c8e734 mscorwks!JIT_StrCns+0x22, calling mscorwks!LazyMachStateCaptureState 0028ee54 68c8e865 mscorwks!JIT_Throw+0x1e, calling mscorwks!LazyMachStateCaptureState 0028eea4 02ffaecd (MethodDesc 0x7af08c +0x7d WindowsFormsApplication1.Form1.F1(System.Object, System.EventArgs)), calling mscorwks!JIT_Throw 0028eeec 02ffaf19 (MethodDesc 0x7af098 +0x29 WindowsFormsApplication1.Form1.F2()), calling 06370634 0028ef58 02ffae37 (MethodDesc 0x7a7bb0 +0x4f System.Windows.Forms.Control.OnClick(System.EventArgs))   That does look more familar. The call stack has been unwound and we do see only some frames into the history where the debugger was smart enough to find out that we have called F2 from F1. The exception handling on 64 bit systems does work quite differently which seems to have the nice property to remember the called methods not only during the first pass of exception filter clauses (during first pass all catch handler are called if they are going to catch the exception which is about to be thrown)  but also when the actual stack unwind has taken place. This makes it possible to follow not only the call stack right at the moment but also to look into the “history” of the catch/finally clauses. In a 64 bit process you only need to look at the ExceptionTracker to find out if a catch or finally handler was called. The two frames ProcessManagedCallFrame/CallHandler does indicate a finally clause whereas CallCatchHandler/CallHandler indicates a catch clause. That was a interesting one. Oh and by the way if you manage to load the Microsoft symbols you can also find out the hidden exception which. When you encounter in the call stack a line 0016eb34 75b79617 KERNELBASE!RaiseException+0x58 ====> Exception Code e0434f4d cxr@16e850 exr@16e838 Then it is a good idea to execute .exr 16e838 !analyze –v to find out more. In the managed world it is even easier since we can dump the objects allocated on the stack which have not yet been garbage collected to look at former method parameters. The command !dso which is the abbreviation for dump stack objects will give you 0:000> !dso OS Thread Id: 0x46c (0) ESP/REG  Object   Name 0016dd4c 020737f0 System.Exception 0016dd98 020737f0 System.Exception 0016dda8 01f5c6cc System.Windows.Forms.Button 0016ddac 01f5d2b8 System.EventHandler 0016ddb0 02071744 System.Windows.Forms.MouseEventArgs 0016ddc0 01f5d2b8 System.EventHandler 0016ddcc 01f5c6cc System.Windows.Forms.Button 0016dddc 020737f0 System.Exception 0016dde4 01f5d2b8 System.EventHandler 0016ddec 02071744 System.Windows.Forms.MouseEventArgs 0016de40 020737f0 System.Exception 0016de80 02071744 System.Windows.Forms.MouseEventArgs 0016de8c 01f5d2b8 System.EventHandler 0016de90 01f5c6cc System.Windows.Forms.Button 0016df10 02073784 System.SByte[] 0016df5c 02073684 System.NotImplementedException 0016e2a0 02073684 System.NotImplementedException 0016e2e8 01ed69f4 System.Resources.ResourceManager From there it is easy to do 0:000> !pe 02073684 Exception object: 02073684 Exception type: System.NotImplementedException Message: Die Methode oder der Vorgang sind nicht implementiert. InnerException: <none> StackTrace (generated):     SP       IP       Function     0016ECB0 006904AD WindowsFormsApplication2!WindowsFormsApplication2.Form1.F3()+0x35     0016ECC0 00690411 WindowsFormsApplication2!WindowsFormsApplication2.Form1.F2()+0x29     0016ECF0 0069038F WindowsFormsApplication2!WindowsFormsApplication2.Form1.F1(System.Object, System.EventArgs)+0x3f StackTraceString: <none> HResult: 80004001 to see the former exception. That´s all for today.

  Read the article

• PASS Summit 2011 &ndash; Part III

  - by Tara Kizer

  Well we’re about a month past PASS Summit 2011, and yet I haven’t finished blogging my notes! Between work and home life, I haven’t been able to come up for air in a bit.  Now on to my notes… On Thursday of the PASS Summit 2011, I attended Klaus Aschenbrenner’s (blog|twitter) “Advanced SQL Server 2008 Troubleshooting”, Joe Webb’s (blog|twitter) “SQL Server Locking & Blocking Made Simple”, Kalen Delaney’s (blog|twitter) “What Happened? Exploring the Plan Cache”, and Paul Randal’s (blog|twitter) “More DBA Mythbusters”.  I think my head grew two times in size from the Thursday sessions.  Just WOW! I took a ton of notes in Klaus' session.  He took a deep dive into how to troubleshoot performance problems.  Here is how he goes about solving a performance problem: Start by checking the wait stats DMV System health Memory issues I/O issues I normally start with blocking and then hit the wait stats.  Here’s the wait stat query (Paul Randal’s) that I use when working on a performance problem.  He highlighted a few waits to be aware of such as WRITELOG (indicates IO subsystem problem), SOS_SCHEDULER_YIELD (indicates CPU problem), and PAGEIOLATCH_XX (indicates an IO subsystem problem or a buffer pool problem).  Regarding memory issues, Klaus recommended that as a bare minimum, one should set the “max server memory (MB)” in sp_configure to 2GB or 10% reserved for the OS (whichever comes first).  This is just a starting point though! Regarding I/O issues, Klaus talked about disk partition alignment, which can improve SQL I/O performance by up to 100%.  You should use 64kb for NTFS cluster, and it’s automatic in Windows 2008 R2. Joe’s locking and blocking presentation was a good session to really clear up the fog in my mind about locking.  One takeaway that I had no idea could be done was that you can set a timeout in T-SQL code view LOCK_TIMEOUT.  If you do this via the application, you should trap error 1222. Kalen’s session went into execution plans.  The minimum size of a plan is 24k.  This adds up fast especially if you have a lot of plans that don’t get reused much.  You can use sys.dm_exec_cached_plans to check how often a plan is being reused by checking the usecounts column.  She said that we can use DBCC FLUSHPROCINDB to clear out the stored procedure cache for a specific database.  I didn’t know we had this available, so this was great to hear.  This will be less intrusive when an emergency comes up where I’ve needed to run DBCC FREEPROCCACHE. Kalen said one should enable “optimize for ad hoc workloads” if you have an adhoc loc.  This stores only a 300-byte stub of the first plan, and if it gets run again, it’ll store the whole thing.  This helps with plan cache bloat.  I have a lot of systems that use prepared statements, and Kalen says we simulate those calls by using sp_executesql.  Cool! Paul did a series of posts last year to debunk various myths and misconceptions around SQL Server.  He continues to debunk things via “DBA Mythbusters”.  You can get a PDF of a bunch of these here.  One of the myths he went over is the number of tempdb data files that you should have.  Back in 2000, the recommendation was to have as many tempdb data files as there are CPU cores on your server.  This no longer holds true due to the numerous cores we have on our servers.  Paul says you should start out with 1/4 to 1/2 the number of cores and work your way up from there.  BUT!  Paul likes what Bob Ward (twitter) says on this topic: 8 or less cores –> set number of files equal to the number of cores Greater than 8 cores –> start with 8 files and increase in blocks of 4 One common myth out there is to set your MAXDOP to 1 for an OLTP workload with high CXPACKET waits.  Instead of that, dig deeper first.  Look for missing indexes, out-of-date statistics, increase the “cost threshold for parallelism” setting, and perhaps set MAXDOP at the query level.  Paul stressed that you should not plan a backup strategy but instead plan a restore strategy.  What are your recoverability requirements?  Once you know that, now plan out your backups. As Paul always does, he talked about DBCC CHECKDB.  He said how fabulous it is.  I didn’t want to interrupt the presentation, so after his session had ended, I asked Paul about the need to run DBCC CHECKDB on your mirror systems.  You could have data corruption occur at the mirror and not at the principal server.  If you aren’t checking for data corruption on your mirror systems, you could be failing over to a corrupt database in the case of a disaster or even a planned failover.  You can’t run DBCC CHECKDB against the mirrored database, but you can run it against a snapshot off the mirrored database.

  Read the article

• Disk Drive not working

  - by user287681

  The CD/DVD drive on my sisters' (I'm helping her shift from Win. XP (now officially deprecated by Microsoft) to Ubuntu) system. Now, it may end up being a failed attempt, all together (Almost the whole last year (when she's been on XP) the disk drive hasn't (not even powering on) been working.), I just want to make sure I've explored every remote possibility. Because I figure, "Huh, now that I've got Ubuntu running, instead of XP, that (just) might make a difference.". I have tried using the sudo lshw command in the terminal, to (seemingly) no avil, but, who knows, you might be able to make something out of it. Here's the output: kyra@kyra-Satellite-P105:~$ sudo lshw [sudo] password for kyra: kyra-satellite-p105 description: Notebook product: Satellite P105 () vendor: TOSHIBA version: PSPA0U-0TN01M serial: 96084354W width: 64 bits capabilities: smbios-2.4 dmi-2.4 vsyscall32 configuration: administrator_password=disabled boot=oem-specific chassis=notebook frontpanel_password=unknown keyboard_password=unknown power-on_password=disabled uuid=00900559-F88E-D811-82E0-00163680E992 *-core description: Motherboard product: Satellite P105 vendor: TOSHIBA physical id: 0 version: Not Applicable serial: 1234567890 *-firmware description: BIOS vendor: TOSHIBA physical id: 0 version: V4.70 date: 01/19/20092 size: 92KiB capabilities: isa pci pcmcia pnp upgrade shadowing escd cdboot acpi usb biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM)2 CPU T5 slot: U2E1 size: 1667MHz capacity: 1667MHz width: 64 bits clock: 166MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1 Cache size: 16KiB capacity: 16KiB capabilities: asynchronous internal write-back *-cache:1 description: L2 cache physical id: 6 slot: L2 Cache size: 2MiB capabilities: burst external write-back *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB capacity: 3GiB *-bank:0 description: SODIMM DDR2 Synchronous physical id: 0 slot: M1 size: 1GiB width: 64 bits *-bank:1 description: SODIMM DDR2 Synchronous physical id: 1 slot: M2 size: 1GiB width: 64 bits *-pci description: Host bridge product: Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display:0 description: VGA compatible controller product: Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 03 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:d0200000-d027ffff ioport:1800(size=8) memory:c0000000-cfffffff memory:d0300000-d033ffff *-display:1 UNCLAIMED description: Display controller product: Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 03 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:d0280000-d02fffff *-multimedia description: Audio device product: NM10/ICH7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d0340000-d0343fff *-pci:0 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:84000000-841fffff ioport:84200000(size=2097152) *-pci:1 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:4000(size=4096) memory:84400000-846fffff ioport:84700000(size=2097152) *-network description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d6:d2:35 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.13.0-29-generic firmware=15.32.2.9 ip=10.110.20.157 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:43 memory:84400000-84400fff *-pci:2 description: PCI bridge product: NM10/ICH7 Family PCI Express Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:5000(size=4096) memory:84900000-84afffff ioport:84b00000(size=2097152) *-usb:0 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:1820(size=32) *-usb:1 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:1840(size=32) *-usb:2 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:1860(size=32) *-usb:3 description: USB controller product: NM10/ICH7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:1880(size=32) *-usb:4 description: USB controller product: NM10/ICH7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:d0544000-d05443ff *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list resources: ioport:2000(size=4096) memory:d0000000-d00fffff ioport:80000000(size=67108864) *-pcmcia description: CardBus bridge product: PCIxx12 Cardbus Controller vendor: Texas Instruments physical id: 4 bus info: pci@0000:0a:04.0 version: 00 width: 32 bits clock: 33MHz capabilities: pcmcia bus_master cap_list configuration: driver=yenta_cardbus latency=176 maxlatency=5 mingnt=192 resources: irq:17 memory:d0004000-d0004fff ioport:2400(size=256) ioport:2800(size=256) memory:80000000-83ffffff memory:88000000-8bffffff *-firewire description: FireWire (IEEE 1394) product: PCIxx12 OHCI Compliant IEEE 1394 Host Controller vendor: Texas Instruments physical id: 4.1 bus info: pci@0000:0a:04.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm ohci bus_master cap_list configuration: driver=firewire_ohci latency=64 maxlatency=4 mingnt=3 resources: irq:17 memory:d0007000-d00077ff memory:d0000000-d0003fff *-storage description: Mass storage controller product: 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) vendor: Texas Instruments physical id: 4.2 bus info: pci@0000:0a:04.2 version: 00 width: 32 bits clock: 33MHz capabilities: storage pm bus_master cap_list configuration: driver=tifm_7xx1 latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0005000-d0005fff *-generic description: SD Host controller product: PCIxx12 SDA Standard Compliant SD Host Controller vendor: Texas Instruments physical id: 4.3 bus info: pci@0000:0a:04.3 version: 00 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=sdhci-pci latency=64 maxlatency=4 mingnt=7 resources: irq:17 memory:d0007800-d00078ff *-network description: Ethernet interface product: PRO/100 VE Network Connection vendor: Intel Corporation physical id: 8 bus info: pci@0000:0a:08.0 logical name: eth0 version: 02 serial: 00:16:36:80:e9:92 size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half latency=64 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10Mbit/s resources: irq:20 memory:d0006000-d0006fff ioport:2000(size=64) *-isa description: ISA bridge product: 82801GBM (ICH7-M) LPC Interface Bridge vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide description: IDE interface product: 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:18b0(size=16) *-serial UNCLAIMED description: SMBus product: NM10/ICH7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:18c0(size=32) *-scsi physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: ST9250421AS vendor: Seagate physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: SD13 serial: 5TH0B2HB size: 232GiB (250GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=000d7fd5 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: 13bb4bdd-8cc9-40e2-a490-dbe436c2a02d size: 230GiB capacity: 230GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2014-06-01 17:37:01 filesystem=ext4 lastmountpoint=/ modified=2014-06-01 21:15:21 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2014-06-01 21:15:21 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 2037MiB capacity: 2037MiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 2037MiB capabilities: nofs *-remoteaccess UNCLAIMED vendor: Intel physical id: 1 capabilities: inbound kyra@kyra-Satellite-P105:~$

  Read the article

• Can you help me fix my broken packages?

  - by Andreas Hartmann

  I would like to upgrade from 13.04 to 13.10, but some broken packages are preventing upgrade success: grep Broken /var/log/dist-upgrade/apt.log output: Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libunity9:amd64 Breaks on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) (< 7.1.2) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ i386 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libmutter0b:amd64 Breaks on libmutter0a [ amd64 ] < 3.6.3-0ubuntu2 > ( libs ) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken apache2:amd64 Conflicts on apache2.2-common [ amd64 ] < 2.2.22-6ubuntu5.1 > ( httpd ) Broken chromium-codecs-ffmpeg-extra:amd64 Conflicts on chromium-codecs-ffmpeg [ amd64 ] < 28.0.1500.71-0ubuntu1.13.04.1 -> 29.0.1547.65-0ubuntu2 > ( universe/web ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken libsnmp30:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) Broken apache2.2-bin:amd64 Breaks on gnome-user-share [ amd64 ] < 3.0.4-0ubuntu1 > ( gnome ) (< 3.8.0-2~) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken lib32asound2:amd64 Depends on libasound2 [ amd64 ] < 1.0.25-4ubuntu3.1 -> 1.0.27.2-1ubuntu6 > ( libs ) (= 1.0.25-4ubuntu3.1) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken icaclient:amd64 Depends on lib32asound2 [ amd64 ] < 1.0.25-4ubuntu3.1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken apache2-bin:amd64 Conflicts on apache2.2-bin [ amd64 ] < 2.2.22-6ubuntu5.1 -> 2.4.6-2ubuntu2 > ( httpd ) (< 2.3~) Output for cat /etc/apt/sources.list /etc/apt/sources.list.d/*.list # deb cdrom:[Ubuntu 13.04 _Raring Ringtail_ - Release amd64 (20130424)]/ raring main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ raring universe deb http://de.archive.ubuntu.com/ubuntu/ raring-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ raring multiverse deb http://de.archive.ubuntu.com/ubuntu/ raring-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu raring-security main restricted deb http://security.ubuntu.com/ubuntu raring-security universe deb http://security.ubuntu.com/ubuntu raring-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu raring partner # deb-src http://archive.canonical.com/ubuntu raring partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu raring main # deb-src http://extras.ubuntu.com/ubuntu raring main # deb http://linux.dropbox.com/ubuntu precise main output for sudo dpkg -l | grep -e "^iU" -e "^rc": rc ibm-lotus-cae 8.5.2-20100805.0821 i386 IBM Lotus Composite Application Editor rc ibm-lotus-cae-nl1 8.5.2-20100805.0821 i386 IBM Lotus CAE NL1 rc ibm-lotus-feedreader 8.5.2-20100805.0821 i386 Feeds for IBM Lotus Notes 8.5.2 rc ibm-lotus-feedreader-nl1 8.5.2-20100805.0821 i386 IBM Lotus Feed Reader NL1 rc ibm-lotus-notes 8.5.2-20100805.0821 i386 IBM Lotus Notes rc ibm-lotus-notes-core-de 8.5.2-20100805.0821 i386 IBM Lotus Notes Native German (de) rc ibm-lotus-notes-nl1 8.5.2-20100805.0821 i386 IBM Lotus Notes Java NL1 rc ibm-lotus-sametime 8.5.2-20100805.0821 i386 IBM Lotus Sametime rc ibm-lotus-symphony 8.5.2-20100805.0821 i386 IBM Lotus Symphony rc ibm-lotus-symphony-nl1 8.5.2-20100805.0821 i386 IBM Lotus Symphony NL1 rc libapache2-mod-php5filter 5.4.9-4ubuntu2.2 amd64 server-side, HTML-embedded scripting language (apache 2 filter module) rc libavcodec53:amd64 6:0.8.6-1ubuntu2 amd64 Libav codec library rc libavutil51:amd64 6:0.8.6-1ubuntu2 amd64 Libav utility library rc libmotif4:amd64 2.3.3-7ubuntu1 amd64 Open Motif - shared libraries rc linux-image-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP

  Read the article

• Do you know your ADF "grace period?"

  - by Chris Muir

  What does the term "support" mean to you in context of vendors such as Oracle giving your organization support with our products? Over the last few weeks I'm taken a straw poll to discuss this very question with customers, and I've received a wide array of answers much to my surprise (which I've paraphrased): "Support means my staff can access dedicated resources to assist them solve problems" "Support means I can call Oracle at anytime to request assistance" "Support means we can expect fixes and patches to bugs in Oracle software" The last expectation is the one I'd like to focus on in this post, keep it in mind while reading this blog. From Oracle's perspective as we're in the business of support, we in fact offer numerous services which are captured on the table in the following page. As the text under the table indicates, you should consult the relevant Oracle Lifetime Support brochures to understand the length of time Oracle will support Oracle products. As I'm a product manager for ADF that sits under the FMW tree of Oracle products, let's consider ADF in particular. The FMW brochure is found here. On page 8 and 9 you'll see the current "Application Development Framework 11gR1 (11.1.1.x)" and "Application Development Framework 11gR2 (11.1.2)" releases are supported out to 2017 for Extended Support. This timeframe is pretty standard for Oracle's current released products, though as new releases roll in we should see those dates extended. On page 8 of the PDF note the comment at the end of this page that refers to the Oracle Support document 209768.1: For more-detailed information on bug fix and patch release policies, please refer to the “Error Correction Support Policy” on MyOracle Support. This policy document is important as it introduces Oracle's Error Correction Support Policy which addresses "patches and fixes". You can find it attached the previous Oracle Support document 209768.1. Broadly speaking while Oracle does provide "generalized support" up to 2017 for ADF, the Error Correction Support Policy dictates when Oracle will provide "patches and fixes" for Oracle software, and this is where the concept of the "grace period" comes in. As Oracle releases different versions of Oracle software, say 11.1.1.4.0, you are fully supported for patches and fixes for that specific version. However when we release the next version, say 11.1.1.5.0, Oracle provides at minimum of 3 months to a maximum of 1 year "grace period" where we'll continue to provide patches and fixes for the previous version. This gives you time to move from 11.1.1.4.0 to 11.1.1.5.0 without being unsupported for patches and fixes. The last paragraph does generalize as I've attempted to highlight the concept of the grace period rather than the specific dates for any version. For specific ADF and FMW versions and their respective grace periods and when they terminated you must visit Oracle Support Note 1290894.1. I'd like to include a screenshot here of the relevant table from that Oracle Support Note but as it is will be frequently updated it's better I force you to visit that note. Be careful to heed the comment in the note: According to policy, the Grace Period has passed because a newer Patch Set has been released for more than a year. Its important to note that the Lifetime Support Policy and Error Correction Support Policy documents are the single source of truth, subject to change, and will provide exceptions when required. This My Oracle Support document is providing a summary of the Grace Period dates and time lines for planning purposes. So remember to return to the policy document for all definitions, note 1290894.1 is a summary only and not guaranteed to be up to date or correct. A last point from Oracle's perspective. Why doesn't Oracle provide patches and fixes for all releases as long as they're supported? Amongst other reasons, it's a matter of practicality. Consider JDeveloper 10.1.3 released in 2005. JDeveloper 10.1.3 is still currently supported to 2017, but since that version was released there has been just under 20 newer releases of JDeveloper. Now multiply that across all Oracle's products and imagine the number of releases Oracle would have to provide fixes and patches for, and maintain environments to test them, build them, staff to write them and more, it's simple beyond the capabilities of even a large software vendor like Oracle. So the "grace period" restricts that patches and fixes window to something manageable. In conclusion does the concept of the "grace period" matter to you? If you define support as "getting assistance from Oracle" then maybe not. But if patches and fixes are important to you, then you need to understand the "grace period" and operate within the bounds of Oracle's Error Correction Support Policy. Disclaimer: this blog post was written July 2012. Oracle Support policies do change from time to time so the emphasis is on you to double check the facts presented in this blog.

  Read the article

• The challenge of communicating externally with IRM secured content

  - by Simon Thorpe

  I am often asked by customers about how they handle sending IRM secured documents to external parties. Their concern is that using IRM to secure sensitive information they need to share outside their business, is troubled with the inability for third parties to install the software which enables them to gain access to the information. It is a very legitimate question and one i've had to answer many times in the past 10 years whilst helping customers plan successful IRM deployments. The operating system does not provide the required level of content security The problem arises from what IRM delivers, persistent security to your sensitive information where ever it resides and whenever it is in use. Oracle IRM gives customers an array of features that help ensure sensitive information in an IRM document or email is always protected and only accessed by authorized users using legitimate applications. Examples of such functionality are; Control of the clipboard, either by disabling completely in the opened document or by allowing the cut and pasting of information between secured IRM documents but not into insecure applications. Protection against programmatic access to the document. Office documents and PDF documents have the ability to be accessed by other applications and scripts. With Oracle IRM we have to protect against this to ensure content cannot be leaked by someone writing a simple program. Securing of decrypted content in memory. At some point during the process of opening and presenting a sealed document to an end user, we must decrypt it and give it to the application (Adobe Reader, Microsoft Word, Excel etc). This process must be secure so that someone cannot simply get access to the decrypted information. The operating system alone just doesn't have the functionality to deliver these types of features. This is why for every IRM technology there must be some extra software installed and typically this software requires administrative rights to do so. The fact is that if you want to have very strong security and access control over a document you are going to send to someone who is beyond your network infrastructure, there must be some software to provide that functionality. Simple installation with Oracle IRM The software used to control access to Oracle IRM sealed content is called the Oracle IRM Desktop. It is a small, free piece of software roughly about 12mb in size. This software delivers functionality for everything a user needs to work with an Oracle IRM solution. It provides the functionality for all formats we support, the storage and transparent synchronization of user rights and unique to Oracle, the ability to search inside sealed files stored on the local computer. In Oracle we've made every technical effort to ensure that installing this software is a simple as possible. In situations where the user's computer is part of the enterprise, this software is typically deployed using existing technologies such as Systems Management Server from Microsoft or by using Active Directory Group Policies. However when sending sealed content externally, you cannot automatically install software on the end users machine. You need to rely on them to download and install themselves. Again we've made every effort for this manual install process to be as simple as we can. Starting with the small download size of the software itself to the simple installation process, most end users are able to install and access sealed content very quickly. You can see for yourself how easily this is done by walking through our free and easy self service demonstration of using sealed content. How to handle objections and ensure there is value However the fact still remains that end users may object to installing, or may simply be unable to install the software themselves due to lack of permissions. This is often a problem with any technology that requires specialized software to access a new type of document. In Oracle, over the past 10 years, we've learned many ways to get over this barrier of getting software deployed by external users. First and I would say of most importance, is the content MUST have some value to the person you are asking to install software. Without some type of value proposition you are going to find it very difficult to get past objections to installing the IRM Desktop. Imagine if you were going to secure the weekly campus restaurant menu and send this to contractors. Their initial response will be, "why on earth are you asking me to download some software just to access your menu!?". A valid objection... there is no value to the user in doing this. Now consider the scenario where you are sending one of your contractors their employment contract which contains their address, social security number and bank account details. Are they likely to take 5 minutes to install the IRM Desktop? You bet they are, because there is real value in doing so and they understand why you are doing it. They want their personal information to be securely handled and a quick download and install of some software is a small task in comparison to dealing with the loss of this information. Be clear in communicating this value So when sending sealed content to people externally, you must be clear in communicating why you are using an IRM technology and why they need to install some software to access the content. Do not try and avoid the issue, you must be clear and upfront about it. In doing so you will significantly reduce the "I didn't know I needed to do this..." responses and also gain respect for being straight forward. One customer I worked with, 6 months after the initial deployment of Oracle IRM, called me panicking that the partner they had started to share their engineering documents with refused to install any software to access this highly confidential intellectual property. I explained they had to communicate to the partner why they were doing this. I told them to go back with the statement that "the company takes protecting its intellectual property seriously and had decided to use IRM to control access to engineering documents." and if the partner didn't respect this decision, they would find another company that would. The result? A few days later the partner had made the Oracle IRM Desktop part of their approved list of software in the company. Companies are successful when sending sealed content to third parties We have many, many customers who send sensitive content to third parties. Some customers actually sell access to Oracle IRM protected content and therefore 99% of their users are external to their business, one in particular has sold content to hundreds of thousands of external users. Oracle themselves use the technology to secure M&A documents, payroll data and security assessments which go beyond the traditional enterprise security perimeter. Pretty much every company who deploys Oracle IRM will at some point be sending those documents to people outside of the company, these customers must be successful otherwise Oracle IRM wouldn't be successful. Because our software is used by a wide variety of companies, some who use it to sell content, i've often run into people i'm sharing a sealed document with and they already have the IRM Desktop installed due to accessing content from another company. The future In summary I would say that yes, this is a hurdle that many customers are concerned about but we see much evidence that in practice, people leap that hurdle with relative ease as long as they are good at communicating the value of using IRM and also take measures to ensure end users can easily go through the process of installation. We are constantly developing new ideas to reducing this hurdle and maybe one day the operating systems will give us enough rich security functionality to have no software installation. Until then, Oracle IRM is by far the easiest solution to balance security and usability for your business. If you would like to evaluate it for yourselves, please contact us.

  Read the article

• Thoughts on Build 2013

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/30/153294.aspxAnd so another Build conference has come to an end. Below are my thoughts/perspectives on various aspects of the event. I’ll do a separate blog post on my thoughts of the Build message for developers. The Good Moscone center was a great venue for Build! Easy to get around, easy to get to, and well maintained, it was a very comfortable conference venue. Yeah, the free swag was nice. Build has built up an expectation that attendees will always get something; it’ll be interesting to see how Microsoft maintains this expectation over the next few Build events. I still maintain that free swag should never be the main reason one attends an event, and for me this was definitely just an added bonus. I’m planning on trying to use the Surface as a dedicated 2nd device at work for meetings, I’ll share my experiences over the next few months. The hackathon event was a great idea, although personally I couldn’t justify spending the money on a conference registration just to spend the entire conference coding. Still, the apps that were created were really great and there was a lot of passion and excitement around the hackathon. I wonder if they couldn’t have had the hackathon on the Monday/Tuesday for those that wanted to participate so they didn’t miss any of the actual conference over Wed/Thurs. San Francisco was a great city to host Build. Getting from hotels to the conference center was very easy (well especially for me, I was only 3 blocks away) and the city itself felt very safe. However, if I never have to fly into SFO again I’ll be alright with that! Delays going into and out of SFO and both apparently were due to the airport itself. The Bad Build is one of those oddities on the conference landscape where people will pay to commit to attending an event without knowing anything about the sessions. We got our list of conference sessions when we registered on Tuesday, not before. And even then, we only got titles and not descriptions (those were eventually made available via the conference’s mobile application). I get it…they’re going to make announcements and they don’t want to give anything away through the session titles. But honestly, there wasn’t anything in the session titles that I would have considered a surprise. Breakfasts were brutal. High-carb pastries, donuts, and muffins with fruit and hard boiled eggs does not a conference breakfast make. I can’t believe that the difference between a continental breakfast per person and a hot breakfast buffet would have been a huge impact to a conference fee that was already around $2000. The vendor area was anemic. I don’t know why Microsoft forces the vendors into cookie-cutter booth areas (this year they were all made of plywood material). WPC, TechEd – booth areas there allow the vendors to be creative with their displays. Not so much for Build. Really odd was the lack of Microsoft’s own representation around Bing. In the day 1 keynote Microsoft made a big deal about Bing as an API. Yet there was nobody in the vendor area set up to provide more information or have discussions with about the Bing API. The Ugly Our name badges were NFC enabled. The purpose of this, beyond the vendors being able to scan your info, wasn’t really made clear. An attendee I talked to showed how you could get a reader app on your phone so you can scan other members cards and collect their contact info – which is a kewl idea; business cards are so 1990’s. But I was *shocked* at the amount of information that was on our name badges! Here’s what’s displayed on our name badge: - Name - Company - Twitter Handle I’m ok with that. But here’s what actually gets read: - Name - Company - Address Used for Registration - Phone Number Used for Registration So sharing that info with another attendee, they get way more of my info than just how to find me on Twitter! Microsoft, you need to fix this for the future. If vendors want to collect information on attendees, they should be able to collect an ID from the badge, then get a report with corresponding records afterwards. My personal information should not be so readily available, and without my knowledge! Final Verdict Maybe its my older age, maybe its where I’m at in life with family, maybe its where I’m at in my career, but when I consider whether a conference experience was valuable I get to the core reason I attend: opportunities to learn, opportunities to network, opportunities to engage with Microsoft. Opportunities to Learn:  Sessions I attended were generally OK, with some really stand out ones on Day 2. I would love to see Microsoft adopt the Dojo format for a portion of their sessions. Hands On Labs are dull, lecture style sessions are great for information sharing. But a guided hands-on coding session (Read: Dojo) provides the best of both worlds. Being that all content is publically available online to everyone (Build attendee or not), the value of attending the conference sessions is decreased. The value though is in the discussions that take part in person afterwards, which leads to… Opportunities to Network: I enjoyed getting together with old friends and connecting with Twitter friends in person for the first time. I also had an opportunity to meet total strangers. So from a networking perspective, Build was fantastic! I still think it would have been great to have an area for ad-hoc discussions – where speakers could announce they’d be available for more questions after their sessions, or attendees who wanted to discuss more in depth on a topic with other attendees could arrange space. Some people have no problems being outgoing and making these things happen, but others are not and a structured model is more attractive. Opportunities to Engage with Microsoft: Hit and miss on this one. Outside of the vendor area, unless you cornered or reached out to a speaker, there wasn’t any defined way to connect with blue badges. And as I mentioned above, Microsoft didn’t have full representation in the vendor area (no Bing). All in all, Build was a fun party where I was informed about some new stuff and got some free swag. Was it worth the time away from home and the hit to my PD budget? I’d say Somewhat. Build is a great informational conference, but I wouldn’t call it a learning conference. Considering that TechEd seems to be moving to more of an IT Pro focus, independent developer conferences seem to be the best value for those looking to learn and not just be informed. With the rapid development cycle Microsoft is embracing, we’re already seeing Build happening twice within a 12 month period. If that continues, the value of attending Build in person starts to diminish – especially with so much content available online. If Microsoft wants Build to be a must-attend event in the future, they need to start incorporating aspects of Tech Ed, past PDCs, and other conferences so those that want to leave with more than free swag have something to attract them.

  Read the article

• Agile Like Jazz

  - by Jeff Certain

  (I’ve been sitting on this for a week or so now, thinking that it needed to be tightened up a bit to make it less rambling. Since that’s clearly not going to happen, reader beware!) I had the privilege of spending around 90 minutes last night sitting and listening to Sonny Rollins play a concert at the Disney Center in LA. If you don’t know who Sonny Rollins is, I don’t know how to explain the experience; if you know who he is, I don’t need to. Suffice it to say that he has been recording professionally for over 50 years, and helped create an entire genre of music. A true master by any definition. One of the most intriguing aspects of a concert like this, however, is watching the master step aside and let the rest of the musicians play. Not just play their parts, but really play… letting them take over the spotlight, to strut their stuff, to soak up enthusiastic applause from the crowd. Maybe a lot of it has to do with the fact that Sonny Rollins has been doing this for more than a half-century. Maybe it has something to do with a kind of patience you learn when you’re on the far side of 80 – and the man can still blow a mean sax for 90 minutes without stopping! Maybe it has to do with the fact that he was out there for the love of the music and the love of the show, not because he had anything to prove to anyone and, I like to think, not for the money. Perhaps it had more to do with the fact that, when you’re at that level of mastery, the other musicians are going to be good. Really good. Whatever the reasons, there was a incredible freedom on that stage – the ability to improvise, for each musician to showcase their own specialization and skills, and them come back to the common theme, back to being on the same page, as it were. All this took place in the same venue that is home to the L.A. Phil. Somehow, I can’t ever see the same kind of free-wheeling improvisation happening in that context. And, since I’m a geek, I started thinking about agility. Rollins has put together a quintet that reflects his own particular style and past. No upright bass or piano for Rollins – drums, bongos, electric guitar and bass guitar along with his sax. It’s not about the mix of instruments. Other trios, quartets, and sextets use different mixes of instruments. New Orleans jazz tends towards trombones instead of sax; some prefer cornet or trumpet. But no matter what the choice of instruments, size matters. Team sizes are something I’ve been thinking about for a while. We’re on a quest to rethink how our teams are organized. They just feel too big, too unwieldy. In fact, they really don’t feel like teams at all. Most of the time, they feel more like collections or people who happen to report to the same manager. I attribute this to a couple factors. One is over-specialization; we have a tendency to have people work in silos. Although the teams are product-focused, within them our developers are both generalists and specialists. On the one hand, we expect them to be able to build an entire vertical slice of the application; on the other hand, each developer tends to be responsible for the vertical slice. As a result, developers often work on their own piece of the puzzle, in isolation. This sort of feels like working on a jigsaw in a group – each person taking a set of colors and piecing them together to reveal a portion of the overall picture. But what inevitably happens when you go to meld all those pieces together? Inevitably, you have some sections that are too big to move easily. These sections end up falling apart under their own weight as you try to move them. Not only that, but there are other challenges – figuring out where that section fits, and how to tie it into the rest of the puzzle. Often, this is when you find a few pieces need to be added – these pieces are “glue,” if you will. The other issue that arises is due to the overhead of maintaining communications in a team. My mother, who worked in IT for around 30 years, once told me that 20% per team member is a good rule of thumb for maintaining communication. While this is a rule of thumb, it seems to imply that any team over about 6 people is going to become less agile simple because of the communications burden. Teams of ten or twelve seem like they fall into the philharmonic organizational model. Complicated pieces of music requiring dozens of players to all be on the same page requires a much different model than the jazz quintet. There’s much less room for improvisation, originality or freedom. (There are probably orchestral musicians who will take exception to this characterization; I’m calling it like I see it from the cheap seats.) And, there’s one guy up front who is running the show, whose job is to keep all of those dozens of players on the same page, to facilitate communications. Somehow, the orchestral model doesn’t feel much like a self-organizing team, either. The first violin may be the best violinist in the orchestra, but they don’t get to perform free-wheeling solos. I’ve never heard of an orchestra getting together for a jam session. But I have heard of teams that organize their work based on the developers available, rather than organizing the developers based on the work required. I have heard of teams where desired functionality is deferred – or worse yet, schedules are missed – because one critical person doesn’t have any bandwidth available. I’ve heard of teams where people simply don’t have the big picture, because there is too much communication overhead for everyone to be aware of everything that is happening on a project. I once heard Paul Rayner say something to the effect of “you have a process that is perfectly designed to give you exactly the results you have.” Given a choice, I want a process that’s much more like jazz than orchestral music. I want a process that doesn’t burden me with lots of forms and checkboxes and stuff. Give me the simplest, most lightweight process that will work – and a smaller team of the best developers I can find. This seems like the kind of process that will get the kind of result I want to be part of.

  Read the article

• 12c??? - Active Data Guard Far Sync

  - by Jian Zhang(??)

  ?? ================ Active Data Guard Far Sync?Oracle 12c????(???Far Sync Standby),Far Sync?????????????(Primary Database)?????????Far Sync??,??(Primary Database) ??(synchronous)??redo?Far Sync??,??Far Sync????redo??(asynchronous)???????(Standby Database)???????????????????????Far Sync????????,init?????????,???????? ??redo ????Maximum Availability??,???????????(Primary Database)?????????Far Sync??,??(Primary Database)??(synchronous)??redo?Far Sync??,???????(zero data loss),?????Far Sync????,??????,??????????????Far Sync????redo??(asynchronous)???????(Standby Database)? ??redo ????Maximum Performance??,???????????(Primary Database)?????????Far Sync??,??(Primary Database) ????redo?Far Sync??,??Far Sync???????redo?????????(Standby Database)????????????????(Standby Database)??redo???(offload)? Far Sync????Data Guard ????(role transitions)????,?switchover/failover?????12c????? ???????Data Guard ????,?switchover/failover,???????????????Far Sync??,??Far Sync???????????????????? ???Far Sync???????,??????????????2?Far Sync??,???????? ???????Far Sync????? Far Sync??? ================ ????Far Sync ================ 1. ??Data Guard,???11.2??,??????«Active Database Duplication for A standby database» 2. ????Far Sync??,Far Sync????????,init?????????,???????? ??Far Sync???????,?????: SQL> ALTER DATABASE CREATE FAR SYNC INSTANCE CONTROLFILE AS '/tmp/controlfs01.ctl'; 3. ????redo?????Far Sync??,????LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cfs SYNC AFFIRM MAX_FAILURE=1 ALTERNATE=LOG_ARCHIVE_DEST_3 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dg12cfs' 4. ??Far Sync??????redo???,??Far Sync??LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cs ASYNC VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=dg12cs' 5. ????Far Sync???????,??????????????2?Far Sync??? 6. ???????: SQL> select * from  V$DATAGUARD_CONFIG; DB_UNIQUE_NAME       PARENT_DBUN       DEST_ROLE         CURRENT_SCN     CON_ID ------------------------------ ------------------------------     ----------------- ----------- ---------- dg12cfs                        dg12cp          FAR SYNC INSTANCE      682995          0 dg12cs                         dg12cfs         PHYSICAL STANDBY       682995          0 dg12cp                        NONE             PRIMARY DATABASE      683138          0 ????????????????:Oracle_12c_Active_Data_Guard_Far_Sync_v1.pdf

  Read the article

• Implications of Java 6 End of Public Updates for EBS Users

  - by Steven Chan (Oracle Development)

  The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates after February 2013. In other words, nothing will change for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6. These Java SE 6 updates will be made available to EBS users for the Extended Support periods documented in the Oracle Lifetime Support policy document for Oracle Applications (PDF): EBS 11i Extended Support ends November 2013 EBS 12.0 Extended Support ends January 2015 EBS 12.1 Extended Support ends December 2018 Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? No. This upgrade will be highly recommended but currently remains optional. JRE 6 will be available to Windows users to run with EBS for the duration of your respective EBS Extended Support period.  Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  The certification of Oracle E-Business Suite with JRE 7 (for desktop clients accessing EBS Forms-based content) is in its final stages.  If you plan to upgrade your EBS desktop clients to JRE 7 when that certification is released, you can get a head-start on that today. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 will be highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290801.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What will Mac users need? Oracle will provide updates to JRE 7 for Mac OS X users. EBS users running Macs will need to upgrade to JRE 7 to receive JRE updates. The certification of Oracle E-Business Suite with JRE 7 for Mac-based desktop clients accessing EBS Forms-based content is underway. Mac users waiting for that certification may find this article useful: How to Reenable Apple Java 6 Plug-in for Mac EBS Users Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? No. This upgrade will be highly recommended but will be optional for EBS application tier servers running on Windows, Linux, and Solaris.  You can choose to remain on JDK 6 for the duration of your respective EBS Extended Support period.  If you remain on JDK 6, you will continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6. The certification of Oracle E-Business Suite with JDK 7 for EBS application tier servers on Windows, Linux, and Solaris as well as other platforms such as IBM AIX and HP-UX is planned.  Customers running platforms other than Windows, Linux, and Solaris should refer to their Java vendors's sites for more information about their support policies. Related Articles Planning Bulletin for JRE 7: What EBS Customers Can Do Today EBS 11i and 12.1 Support Timeline Changes Frequently Asked Questions about Latest EBS Support Changes Critical Patch Updates During EBS 11i Exception to Sustaining Support Period

  Read the article

• WebLogic JDBC Use of Oracle Wallet for SSL

  - by Steve Felts

  Introduction Secure Sockets Layer (SSL) can be used to secure the connection between the middle tier “client”, WebLogic Server (WLS) in this case, and the Oracle database server.  Data between WLS and database can be encrypted.  The server can be authenticated so you have proof that the database can be trusted by validating a certificate from the server.  The client can be authenticated so that the database only accepts connections from clients that it trusts. Similar to the discussion in an earlier article about using the Oracle wallet for database credentials, the Oracle wallet can also be used with SSL to store the keys and certificates.  By using it correctly, clear text passwords can be eliminated from the JDBC configuration and client/server configuration can be simplified by sharing the wallet across multiple datasources. There is a very good Oracle Technical White Paper on using SSL with the Oracle thin driver at http://www.oracle.com/technetwork/database/enterprise-edition/wp-oracle-jdbc-thin-ssl-130128.pdf [LINK1].  The link http://www.oracle.com/technetwork/middleware/weblogic/index-087556.html [LINK2] describes how to use WebLogic Server with Oracle JDBC Driver SSL. The information in this article is a guide on what steps need to be taken in the variety of available options; use the links above for details. SSL from the driver to the database server is basically turned on by specifying a protocol of “tcps” in the URL.  However, there is a fair amount of setup needed.  Also remember that there is an overhead in performance. Creating the wallets The common use cases are 1. “data encryption and server-only authentication”, requiring just a trust store, or 2. “data encryption and authentication of both tiers” (client and server), requiring a trust store and a key store. It is recommended to use the auto-login wallet type so that clear text passwords are not needed in the datasource configuration to open the wallet.  The store type for an auto-login wallet is “SSO” (Single Sign On), not “JKS” or “PKCS12” as in [LINK2].  The file name is “cwallet.sso”. Wallets are created using the orapki tool.  They need to be created based on the usage (encryption and/or authentication).  This is discussed in detail in [LINK1] in Appendix B or in the Advanced Security Administrator’s Guide of the Database documentation. Database Server Configuration It is necessary to update the sqlnet.ora and listener.ora files with the directory location of the wallet using WALLET_LOCATION.  These files also indicate whether or not SSL_CLIENT_AUTHENTICATION is being used (true or false). The Oracle Listener must also be configured to use the TCPS protocol.  The recommended port is 2484. LISTENER = (ADDRESS_LIST= (ADDRESS=(PROTOCOL=tcps)(HOST=servername)(PORT=2484))) WebLogic Server Classpath The WebLogic Server CLASSPATH must have three additional security files. The files that need to be added to the WLS CLASSPATH are $MW_HOME/modules/com.oracle.osdt_cert_1.0.0.0.jar $MW_HOME/modules/com.oracle.osdt_core_1.0.0.0.jar $MW_HOME/modules/com.oracle.oraclepki_1.0.0.0.jar One way to do this is to add them to PRE_CLASSPATH environment variable for use with the standard WebLogic scripts. Setting the Oracle Security Provider It’s necessary to enable the Oracle PKI provider on the client side.  This can either be done statically by updating the java.security file under the JRE or dynamically by setting it in a WLS startup class using java.security.Security.insertProviderAt(new oracle.security.pki.OraclePKIProvider (), 3); See the full example of the startup class in [LINK2]. Datasource Configuration When creating a WLS datasource, set the PROTOCOL in the URL to tcps as in the following. jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=host)(PORT=port))(CONNECT_DATA=(SERVICE_NAME=myservice))) For encryption and server authentication, use the datasource connection properties: - javax.net.ssl.trustStore=location of wallet file on the client - javax.net.ssl.trustStoreType=”SSO” For client authentication, use the datasource connection properties: - javax.net.ssl.keyStore=location of wallet file on the client - javax.net.ssl.keyStoreType=”SSO” Note that the driver connection properties for the wallet require a file name, not a directory name. Active GridLink ONS over SSL For completeness, there is another SSL usage for WLS datasources.  The communication with the Oracle Notification Service (ONS) for load balancing information and node up/down events can use SSL also. Create an auto-login wallet and use the wallet on the client and server.  The following is a sample sequence to create a test wallet for use with ONS. orapki wallet create -wallet ons -auto_login -pwd ONS_Wallet orapki wallet add -wallet ons -dn "CN=ons_test,C=US" -keysize 1024 -self_signed -validity 9999 -pwd ONS_Wallet orapki wallet export -wallet ons -dn "CN=ons_test,C=US" -cert ons/cert.txt -pwd ONS_Wallet On the database server side, it’s necessary to define the walletfile directory in the file $CRS_HOME/opmn/conf/ons.config and run onsctl stop/start. When configuring an Active GridLink datasource, the connection to the ONS must be defined.  In addition to the host and port, the wallet file directory must be specified.  By not giving a password, a SSO wallet is assumed. Summary To use SSL with the Oracle thin driver without any clear text passwords, use an SSO Oracle Wallet.  SSL support in the Oracle thin driver is available starting in 10g Release 2.

  Read the article

• Announcing Solaris Technical Track at NLUUG Spring Conference on Operating Systems

  - by user9135656

  The Netherlands Unix Users Group (NLUUG) is hosting a full-day technical Solaris track during its spring 2012 conference. The official announcement page, including registration information can be found at the conference page.This year, the NLUUG spring conference focuses on the base of every computing platform; the Operating System. Hot topics like Cloud Computing and Virtualization; the massive adoption of mobile devices that have their special needs in the OS they run but that at the same time put the challenge of massive scalability onto the internet; the upspring of multi-core and multi-threaded chips..., all these developments cause the Operating System to still be a very interesting area where all kinds of innovations have taken and are taking place.The conference will focus specifically on: Linux, BSD Unix, AIX, Windows and Solaris. The keynote speech will be delivered by John 'maddog' Hall, infamous promotor and supporter of UNIX-based Operating Systems. He will talk the audience through several decades of Operating Systems developments, and share many stories untold so far. To make the conference even more interesting, a variety of talks is offered in 5 parallel tracks, covering new developments in and  also collaboration  between Linux, the BSD's, AIX, Solaris and Windows. The full-day Solaris technical track covers all innovations that have been delivered in Oracle Solaris 11. Deeply technically-skilled presenters will talk on a variety of topics. Each topic will first be introduced at a basic level, enabling visitors to attend to the presentations individually. Attending to the full day will give the audience a comprehensive overview as well as more in-depth understanding of the most important new features in Solaris 11.NLUUG Spring Conference details:* Date and time:        When : April 11 2012        Start: 09:15 (doors open: 8:30)        End  : 17:00, (drinks and snacks served afterwards)* Venue:        Nieuwegein Business Center        Blokhoeve 1             3438 LC Nieuwegein              The Nederlands          Tel     : +31 (0)30 - 602 69 00        Fax     : +31 (0)30 - 602 69 01        Email   : [email protected]        Route   : description - (PDF, Dutch only)* Conference abstracts and speaker info can be found here.* Agenda for the Solaris track: Note: talks will be in English unless marked with 'NL'.1.      Insights to Solaris 11         Joerg Moellenkamp - Solaris Technical Specialist         Oracle Germany2.      Lifecycle management with Oracle Solaris 11         Detlef Drewanz - Solaris Technical Specialist         Oracle Germany3.      Solaris 11 Networking - Crossbow Project        Andrew Gabriel - Solaris Technical Specialist        Oracle UK4.      ZFS: Data Integrity and Security         Darren Moffat - Senior Principal Engineer, Solaris Engineering         Oracle UK5.      Solaris 11 Zones and Immutable Zones (NL)         Casper Dik - Senior Staff Engineer, Software Platforms         Oracle NL6.      Experiencing Solaris 11 (NL)         Patrick Ale - UNIX Technical Specialist         UPC Broadband, NLTalks are 45 minutes each.There will be a "Solaris Meeting point" during the conference where people can meet-up, chat with the speakers and with fellow Solaris enthousiasts, and where live demos or other hands-on experiences can be shared.The official announcement page, including registration information can be found at the conference page on the NLUUG website. This site also has a complete list of all abstracts for all talks.Please register on the NLUUG website.

  Read the article

• Silverlight 4 Twitter Client &ndash; Part 7

  - by Max

  Download this article as a PDF Welcome back :) This week we are going to look at something more exciting and a much required feature for any twitter client – auto refresh so as to show new status updates. We are going to achieve this using Silverlight 4 Timers and a bit and refresh our datagrid every 2 minutes to show new updates. We will do this so that we do only minimal request to the twitter api, so that twitter does not block us – there is a limit of 150 request an hour. Let us get started now. Also we will get the profile user id hyperlinked, so that when ever the user click on it, we will take them to their twitter page. Also it was a pain to always run this application by pressing F5, then it would open in a browser you would have to right click uninstall and install it again to see any changes. All this and yet we were not able to debug it :( Now there is a solution for this to run a silverlight application directly out of browser and yet have the debug feature. Super cool, here is how. Right on the Silverlight project and go to debug and then select the Out-Of-Browser application option and choose the *.Web project. Then just right click on the SL project and set as Startup Project. There you go, now every time you press F5, it will automatically run out of browser and still have the debug options. I go to know about this after some binging. Now let us jump to the core straight away. 1) To get the user id hyperlinked, we need to have a DataGridTemplateColumn and within that have a HyperLinkButton. The code for this will  be <data:DataGridTemplateColumn> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <HyperlinkButton Click="HyperlinkButton_Click" Content="{Binding UserName}" TargetName="_blank" ></HyperlinkButton> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> </data:DataGridTemplateColumn> 2) Now let us look at how we are getting this done by looking into HyperlinkButton_Click event handler. There we will dynamically set the NavigateUri to the twitter page. I tried to do this using some binding, eval like stuff as in ASP.NET, but no luck! private void HyperlinkButton_Click(object sender, RoutedEventArgs e) { HyperlinkButton hb = (HyperlinkButton)e.OriginalSource; hb.NavigateUri = new Uri("http://twitter.com/" + hb.Content.ToString(), UriKind.Absolute); } 3) Now we need to switch on our Timer right in the OnNavigated to event on our SL page. So we need to modify our OnNavigated event to some thing like below: protected override void OnNavigatedTo(NavigationEventArgs e) { image1.Source = new BitmapImage(new Uri(GlobalVariable.profileImage, UriKind.Absolute)); this.Title = GlobalVariable.getUserName() + " - Home"; if (!GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Login", UriKind.Relative)); else { currentGrid = "Timeline-Grid"; TwitterCredentialsSubmit(); myDispatcherTimer.Interval = new TimeSpan(0, 0, 0, 60, 0); myDispatcherTimer.Tick += new EventHandler(Each_Tick); myDispatcherTimer.Start(); } } I use a global string – here it is currentGrid variable to indicate what is bound in the datagrid so that after every timer tick, I can rebind the latest data to it again. Like I will only rebind the friends timeline again if the data grid currently holds it and I’ll only rebind the respective list status again in the data grid, if already a list status is bound to the data grid. In the above timer code, its set to trigger the Each_Tick event handler every 1 minute (60 seconds). TimeSpan takes in (days, hours, minutes, seconds, milliseconds). 4) Now we need to set the list name in the currentGrid variable when a list button is clicked. So add the code line below to the list button event handler currentGrid = currentList = b.Content.ToString(); 5) Now let us see how Each_Tick event handler is implemented. public void Each_Tick(object o, EventArgs sender) { if (!currentGrid.Equals("Timeline-Grid")) getListStatuses(currentGrid); else { WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(GlobalVariable.getUserName(), GlobalVariable.getPassword()); myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); } } If the data grid hold friends timeline, I just use the same bit of code we had already to bind the friends timeline to the data grid. Copy Paste. But if it is some list timeline that is bound in the datagrid, I then call the getListStatus method with the currentGrid string which will actually be holding the list name. 6) I wanted to make the hyperlinks inside the status message as hyperlinks and when the user clicks on it, we can then open that link. I tried using a convertor and using a regex to recognize a url and wrap it up with a href, but that is not gonna work in silverlight textblock :( Anyways that convertor code is in the zip file. 7) You can get the complete project files from here. 8) Please comment below for your doubts, suggestions, improvements. I will try to reply as early as possible. Thanks for all your support. Technorati Tags: Silverlight 4,Datagrid,Twitter API,Silverlight Timer

  Read the article

• Using Transaction Logging to Recover Post-Archived Essbase data

  - by Keith Rosenthal

  Data recovery is typically performed by restoring data from an archive.  Data added or removed since the last archive took place can also be recovered by enabling transaction logging in Essbase.  Transaction logging works by writing transactions to a log store.  The information in the log store can then be recovered by replaying the log store entries in sequence since the last archive took place.  The following information is recorded within a transaction log entry: Sequence ID Username Start Time End Time Request Type A request type can be one of the following categories: Calculations, including the default calculation as well as both server and client side calculations Data loads, including data imports as well as data loaded using a load rule Data clears as well as outline resets Locking and sending data from SmartView and the Spreadsheet Add-In.  Changes from Planning web forms are also tracked since a lock and send operation occurs during this process. You can use the Display Transactions command in the EAS console or the query database MAXL command to view the transaction log entries. Enabling Transaction Logging Transaction logging can be enabled at the Essbase server, application or database level by adding the TRANSACTIONLOGLOCATION essbase.cfg setting.  The following is the TRANSACTIONLOGLOCATION syntax: TRANSACTIONLOGLOCATION [appname [dbname]] LOGLOCATION NATIVE ENABLE | DISABLE Note that you can have multiple TRANSACTIONLOGLOCATION entries in the essbase.cfg file.  For example: TRANSACTIONLOGLOCATION Hyperion/trlog NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Hyperion/trlog NATIVE DISABLE The first statement will enable transaction logging for all Essbase applications, and the second statement will disable transaction logging for the Sample application.  As a result, transaction logging will be enabled for all applications except the Sample application. A location on a physical disk other than the disk where ARBORPATH or the disk files reside is recommended to optimize overall Essbase performance. Configuring Transaction Log Replay Although transaction log entries are stored based on the LOGLOCATION parameter of the TRANSACTIONLOGLOCATION essbase.cfg setting, copies of data load and rules files are stored in the ARBORPATH/app/appname/dbname/Replay directory to optimize the performance of replaying logged transactions.  The default is to archive client data loads, but this configuration setting can be used to archive server data loads (including SQL server data loads) or both client and server data loads. To change the type of data to be archived, add the TRANSACTIONLOGDATALOADARCHIVE configuration setting to the essbase.cfg file.  Note that you can have multiple TRANSACTIONLOGDATALOADARCHIVE entries in the essbase.cfg file to adjust settings for individual applications and databases. Replaying the Transaction Log and Transaction Log Security Considerations To replay the transactions, use either the Replay Transactions command in the EAS console or the alter database MAXL command using the replay transactions grammar.  Transactions can be replayed either after a specified log time or using a range of transaction sequence IDs. The default when replaying transactions is to use the security settings of the user who originally performed the transaction.  However, if that user no longer exists or that user's username was changed, the replay operation will fail. Instead of using the default security setting, add the REPLAYSECURITYOPTION essbase.cfg setting to use the security settings of the administrator who performs the replay operation.  REPLAYSECURITYOPTION 2 will explicitly use the security settings of the administrator performing the replay operation.  REPLAYSECURITYOPTION 3 will use the administrator security settings if the original user’s security settings cannot be used. Removing Transaction Logs and Archived Replay Data Load and Rules Files Transaction logs and archived replay data load and rules files are not automatically removed and are only removed manually.  Since these files can consume a considerable amount of space, the files should be removed on a periodic basis. The transaction logs should be removed one database at a time instead of all databases simultaneously.  The data load and rules files associated with the replayed transactions should be removed in chronological order from earliest to latest.  In addition, do not remove any data load and rules files with a timestamp later than the timestamp of the most recent archive file. Partitioned Database Considerations For partitioned databases, partition commands such as synchronization commands cannot be replayed.  When recovering data, the partition changes must be replayed manually and logged transactions must be replayed in the correct chronological order. If the partitioned database includes any @XREF commands in the calc script, the logged transactions must be selectively replayed in the correct chronological order between the source and target databases. References For additional information, please see the Oracle EPM System Backup and Recovery Guide.  For EPM 11.1.2.2, the link is http://docs.oracle.com/cd/E17236_01/epm.1112/epm_backup_recovery_1112200.pdf

  Read the article

• Can Google Employees See My Saved Google Chrome Passwords?

  - by Jason Fitzpatrick

  Storing your passwords in your web browser seems like a great time saver, but are the passwords secure and inaccessible to others (even employees of the browser company) when squirreled away? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader MMA is curious if Google employees have (or could have) access to the passwords he stores in Google Chrome: I understand that we are really tempted to save our passwords in Google Chrome. The likely benefit is two fold, You don’t need to (memorize and) input those long and cryptic passwords. These are available wherever you are once you log in to your Google account. The last point sparked my doubt. Since the password is available anywhere, the storage must in some central location, and this should be at Google. Now, my simple question is, can a Google employee see my passwords? Searching over the Internet revealed several articles/messages. Do you save passwords in Chrome? Maybe you should reconsider: Talks about your passwords being stolen by someone who has access to your computer account. Nothing mentioned about the central storage security and vulnerability. There is even a response from Chrome browser security tech lead about the first issue. Chrome’s insane password security strategy: Mostly along the same line. You can steal password from somebody if you have access to the computer account. How to Steal Passwords Saved in Google Chrome in 5 Simple Steps: Teaches you how to actually perform the act mentioned in the previous two when you have access to somebody else’s account. There are many more (including this one at this site), mostly along the same line, points, counter-points, huge debates. I refrain from mentioning them here, simply carry a search if you want to find them. Coming back to my original query, can a Google employee see my password? Since I can view the password using a simple button, definitely they can be unhashed (decrypted) even if encrypted. This is very different from the passwords saved in Unix-like OS’s where the saved password can never be seen in plain text. They use a one-way encryption algorithm to encrypt your passwords. This encrypted password is then stored in the passwd or shadow file. When you attempt to login, the password you type in is encrypted again and compared with the entry in the file that stores your passwords. If they match, it must be the same password, and you are allowed access. Thus, a superuser can change my password, can block my account, but he can never see my password. So are his concerns well founded or will a little insight dispel his worry? The Answer SuperUser contributor Zeel helps put his mind at ease: Short answer: No* Passwords stored on your local machine can be decrypted by Chrome, as long as your OS user account is logged in. And then you can view those in plain text. At first this seems horrible, but how did you think auto-fill worked? When that password field gets filled in, Chrome must insert the real password into the HTML form element – or else the page wouldn’t work right, and you could not submit the form. And if the connection to the website is not over HTTPS, the plain text is then sent over the internet. In other words, if chrome can’t get the plain text passwords, then they are totally useless. A one way hash is no good, because we need to use them. Now the passwords are in fact encrypted, the only way to get them back to plain text is to have the decryption key. That key is your Google password, or a secondary key you can set up. When you sign into Chrome and sync the Google servers will transmit the encrypted passwords, settings, bookmarks, auto-fill, etc, to your local machine. Here Chrome will decrypt the information and be able to use it. On Google’s end all that info is stored in its encrpyted state, and they do not have the key to decrypt it. Your account password is checked against a hash to log in to Google, and even if you let chrome remember it, that encrypted version is hidden in the same bundle as the other passwords, impossible to access. So an employee could probably grab a dump of the encrypted data, but it wouldn’t do them any good, since they would have no way to use it.* So no, Google employees can not** access your passwords, since they are encrypted on their servers. * However, do not forget that any system that can be accessed by an authorized user can be accessed by an unauthorized user. Some systems are easier to break than other, but none are fail-proof. . . That being said, I think I will trust Google and the millions they spend on security systems, over any other password storage solution. And heck, I’m a wimpy nerd, it would be easier to beat the passwords out of me than break Google’s encryption. ** I am also assuming that there isn’t a person who just happens to work for Google gaining access to your local machine. In that case you are screwed, but employment at Google isn’t actually a factor any more. Moral: Hit Win + L before leaving machine. While we agree with zeel that it’s a pretty safe bet (as long as your computer is not compromised) that your passwords are in fact safe while stored in Chrome, we prefer to encrypt all our logins and passwords in a LastPass vault. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• ApiChange Is Released!

  - by Alois Kraus

  I have been working on little tool to simplify my life and perhaps yours as developer as well. It is basically a command line tool that allows you to execute queries on your compiled .NET code base. The main purpose is to find out how big the impact of an api change would be if you changed this or that.  Now you can do high level operations like Diff public types for breaking changes. Who uses a method? Who uses a type? Who uses implements an interface? Who references me? What format has the binary  (32/64, Managed C++, Pure IL, Unmanaged)? Search for all event subscribers and unsubscribers. A unique feature is to check for event subscription imbalances. Forgotten event subscriptions are the 90% cause of managed memory leaks. It is done at a per class level. If one class does subscribe to one event more often than it does unsubscribe it is treated as possible event subscription imbalance. Another unique ability is to search for users of string literals which allows you to track users of a string constant which is not possible otherwise. For incremental builds the ShowRebuildTargets command can be used to identify the dependant targets that need a rebuild after you did compile one assembly. It has some heuristics in place to determine the impact of breaking changes and finds out which targets need to be recompiled as well. It has a ton of other features and a an API to access these things programmatically so you can build upon these simple queries create even better tools. Perhaps we get a Visual Studio plug in? You can download it from CodePlex here. It works via XCopy deployment. Simply let it run and check the command line help out. The best feature in my opinion is that the output of nearly all commands can be piped to Excel for further analysis. Since it does read also the pdbs it can show you the source file name and line number as well for all matches. The following picture shows the output of a –WhousesType query. The following command checks where type from BaseLibraryV1.dll are used inside DependantLibV1.dll. All matches are printed out with the reason and matching item along with file and line number. There is even a hyper link to the match which will open Visual Studio. ApiChange -whousestype "*" BaseLibraryV1.dll -in DependantLibV1.dll –excel The "*” is the actual query which means all types. The syntax is the same like in C# just that placeholders are allowed ;-). More info's can be found at the Codeplex Documentation.     The tool was developed in a TDD style manner which means that it is heavily tested and already used by a quite large user base inside the company I do work for. Luckily for you I got the permission to make it public so you take advantage of it. It is fully instrumented with tracing. If you find bugs simply add the –trace command line switch to find out what is failing and send me the output. How is it done? Your first guess might be that it uses reflection. Wrong. It is based on Mono Cecil a free IL parser with a fantastic API to access all internals of a managed assembly. The speed is awesome and to make it even faster I did make the tool heavily multi threaded. The query above did execute in 1.8s with the Excel output. On a rather slow machine I can analyze over 1500 assemblies in less than 40s with a very low memory consumption. The true power of Mono Cecil is that I can load an assembly like any other data file. I have no problems unloading a file but if I would have used reflection I would need to unload a whole AppDomain just to get rid of one assembly in my memory. Just to give you a glimpse how ApiChange.Api.dll can be used I show you one of the unit tests:           public void Can_Find_GenericMethodInvocations_With_Type_Parameters()         { // 1. Create an aggregator to collect our matches             UsageQueryAggregator agg = new UsageQueryAggregator();   // 2. This is the type we want to search for. Load it via the type query             var decimalType = TypeQuery.GetTypeByName(TestConstants.MscorlibAssembly, "System.Decimal");   // 3. register the type query which searches for uses of the Decimal type             new WhoUsesType(agg, decimalType);   // 4. Search for all users of the Decimal type in the DependandLibV1Assembly             agg.Analyze(TestConstants.DependandLibV1Assembly);   // Extract matches and assert             Assert.AreEqual(2, agg.MethodMatches.Count, "Method match count");             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[0].Match.Name);             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[1].Match.Name);         } Many thanks go from here to Jb Evian for the creation of Mono.Cecil. Without this fantastic piece of code it would have been much much harder. There are other options around like the Common Compiler Infrastructure  Metadata Api which should do the same thing but it was not a real option since the Microsoft reader did fail on even simple assemblies (at least in September 2009 this was the case). Besides this I found the CCI Apis much harder to use. The only real competitor was Reflector which does support many things but does not let me access his cool high level analyze commands. So I decided to dig into the IL specs and as a result you can query your compiled binaries from the command line or programmatically. The best thing is you try it out for yourself and give me some feedback what you miss. If you want to contribute or have a cool idea what should be added drop me a mail at A Kraus1@___No [email protected]. There is much more inside the tool I did not talk about it (yet).

  Read the article

• Book Review: Brownfield Application Development in .NET

  - by DotNetBlues

  I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

  Read the article

• Xobni Plus for Outlook [Review]

  - by The Geek

  Overview Xobni Plus is an addin that will bring a sidebar to Outlook which allows you to search through your inbox and contacts a lot easier. It provides the ability to search and keep track of your favorite social networks. Searching with Xobni is a lot more powerful than the default search feature in Outlook. It let’s you drill down your searches to conversations, email, links, and attachments. It now supports Outlook 2010 both 32 & 64-bit versions. Installation & Setup Installation is easy following the wizard. After completing the wizard you can tell you’re friends on Facebook and Twitter that you are now using it. You can also decide to join their Product Improvement Program if you want. After installation when you open Outlook, Xobni appears as a sidebar on the right side. Don’t worry about it always being in the way, as you can hide it if you need more room for other Outlook functions. After Xobni free is installed, you can upgrade to the Plus version at any time. A new window will open up and you can use your Credit Card, PayPal, or redeem a code if you have one. Features & Use Where to begin with the amount of features available in Xobni Plus? It really has an amazing amount of cool features. Of course you’ll have all of the features of the Free Version which we previously covered…and a lot more. After Xobni is installed you’ll notice a section for it on the Ribbon. From here you can search Xobni, show or hide the Sidebar, and change other options. It allows you to easily keep up with various social networks like Facebook, Twitter, and LinkedIn… Check out email analytics and contact ranks. Click on the Files Exchanged tab to search for specific attachments. Quickly search links exchanged with your contacts. Hover over a link to get a preview of what it entails. It gives you the ability to index all of your Yahoo mail as well, without the need for purchasing Yahoo Plus! Then your Yahoo messages appear in the Xobni sidebar. When you select a contact you can see related messages from you Yahoo account. Easily index all of your mail…including Yahoo mail for better organization and faster search results. There are several options you can select to change the way Xobni works. From setting up your Yahoo email, Indexing options, and much more. Additional Features of Xobni Plus Advanced Search Capabilities – Filter results, Boolean & Phrase Search, Ability to search Appointments & Tasks, Advanced Search Builder Search unlimited PST data files Xobni contacts in the compose screen Find links exchanged with your contacts View calendar appointments One year premium tech support No Ads! Performance We ran Xobni Plus on Outlook 2010 32-bit on a Dual-Core AMD Athlon system with 4GB of RAM and found it to run quite smoothly. However, we did notice it would sometimes slow down launching Outlook, especially if other apps are running at the same time. Product Support When you buy a license for Xobni Plus you get a full year of premium tech support. They provide a Questions and Answers page on their site where you can run a search query and answers appear instantly. You can contact support directly as a Plus member through their web form and they advise the turn around time is 2 business days. However, when we tested it, we received a response within 24 hours. They also provide FAQ, Community forum, and you can download the Owners Manual in PDF format from the support page. Conclusion Xobni Plus is a very powerful addin for Outlook and includes a lot more features that we didn’t cover in this review. You can download Xobni free edition which includes an 8 day free trial of the Plus version. This provides a good way to start getting familiar with it. Then upgrade to Xobni Plus at any time for $29.95. Once you get started, you’ll find the sidebar is nicely laid out and intuitive to use. If you live out of Outlook during the day, Xobni Plus is a great addition for fast and powerful searches. It provides an easy way to keep all of your contacts and messages well organized and easy to find. Xobni Plus works with XP, Vista, and Windows 7 (32 & 64-bit editions) Outlook 2003, 2007 and both 32 & 64-bit editions of Outlook 2010. Download Xobni Plus Download Xobni Free Edition Rating Installation: 8 Ease of Use: 8 Features: 9 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Xobni Free Powers Up Outlook’s Search and ContactsCreate an Email Template in Outlook 2003Add Social Elements to Your Gmail Contacts with RapportiveChange Outlook Startup FolderClear Outlook Searches and MRU (Most Recently Used) Lists TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >