Search Results

Search found 20465 results on 819 pages for 'remote tools'.

Page 243/819 | < Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >

• Tomato VPN connect but cannot ping LAN IP

  - by David Hamilton

  I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

  Read the article

• the kvm's terminal works weirdly

  - by Lai Yu-Hsuan

  I connect to a remote machine from the local machine and use virsh console to enter the virtual machine. I don't know how to exactly depict how it works. Normally it works well, but when I run VIM: Then it can't be recovered unless I cut the connection up: It's very hard to work with a broken terminal. Any advice? My terminal works well on my local machine and the remote machine in which the virtual machine runs.

  Read the article

• Is it worth the effort to block failed login attempts

  - by dunxd

  Is it worthwhile running fail2ban, sshdfilter or similar tools, which blacklist IP addresses which attempt and fail to login? I've seen it argued that this is security theatre on a "properly secured" server. However, I feel that it probably makes script kiddies move on to the next server in their list. Let's say that my server is "properly secured" and I am not worried that a brute force attack will actually succeed - are these tools simply keeping my logfiles clean, or am I getting any worthwhile benefit in blocking brute force attack attempts?

  Read the article

• retreive spam from webmail in outlook 2007

  - by Tom

  Hi there, I am using outlook 2007, and I have configured the bugger to retrieve emails from a 1&1 web mail address. It gets all emails from the remote in-box folder but, if one happen to have fallen into the remote spam folder, I never receive it, in outlook! Is there an easy way out for this one ? Thanks!

  Read the article

• How do I troubleshoot hardware issues related to a computer freeze/crash?

  - by KronoS

  What are some common guidelines and issues related to hardware being the issue of a computer crash? What should I look for and how do I troubleshoot these problems? What are some tools that are useful in diagnosing these hardware related crashes? I am looking to be able to isolate the problematic device with specific tools and guidelines. For example if device X is causing system failure how do I go about diagnosing it?

  Read the article

• How to use Massren with Vim?

  - by Remonn

  I want to use massren renamer in vim in order to rename files within the texteditor. First, I used this command within Vim to set Vim as default editor for massren :! c:\tools\massren_renamer\massren.exe --config editor "C:\Progra~2\Vim\vim74\gvim.exe --remote-silent-tab" Then I tried to change a number of text files with this command within Vim: :%! c:\tools\massren_renamer\massren.exe d:\t*.txt but the list of files doesn't open at all in Vim. What did I wrong?

  Read the article

• Do you get given your own IP address on dialup?

  - by Craig Johnston

  Do you get given your own IP address on dialup? I am trying to test remote connections from outside my LAN. Will I be given an IP address that I can use for remote desktop and assistance?

  Read the article

• Connection to VPN using command line

  - by plurby

  I've wrote a simple batch file to connect to a specific VPN connection using RASDIAL rasdial MyVPNConnection but it always returned the error 691 Access denied because username and/or password is invalid on the domain. Remote Access Service (RAS) Error Code List then i tried pointing to my Remote Access Phonebook (Rasphone.pbk) and see what happens rasdial MyVPNConnection /phonebook:%userprofile%\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk and still there was an error 691. I've then unchecked the following but still the same problem was reported when executing my batch file.

  Read the article

• Windows Server 2012 File Security Warning

  - by Technicolour

  I've mapped my domain users to a remote share, and I'm trying to get rid of the security warning that appears whenever a file is run from the remote share. I've tried adding the FQDN to the intranet list with no prevail and I'm starting to go crazy. I've also turned off IE Enhanced Security Configuration for both Admins and Users. The group policies are being applied, and I can see the FQDN in the intranet list in internet options. Relevant group policy: Relevant security warning:

  Read the article

• How to change the language of dictionary in word for mac

  - by TheLearner

  My friend is using Microsoft Word for Mac (which is a total train smash). and we want to change the spell check from English (US) to English (UK). This is what I have tried: Make a spelling mistake otherwise you can't get to spelling options. Click Tools Spelling and Grammar Options Dictionaries Change language to English (UK) and click OK Type an English (US) word 'Categorize' Click Tools Spelling and Grammar - 'Spelling and Grammar check complete' i.e. it did not mark the work incorrect.

  Read the article

• "rst2html: command not found" after installing docutils?

  - by AP257

  Hi I've installed docutils on my Mac OS system following the docutils instructions. I've also done: $ sudo cp tools/buildhtml.py tools/rst2html.py /usr/local/bin However, if I open a command line and type rst2html, I get 'command not found'. If I type rst2html.py, there's no problem, so the Python file itself is on my path. How do I get my system to recognize rst2html as a valid command? Thanks!

  Read the article

• error while loading shared libraries Dicom Store SCU / Echo SCU

  - by David Just

  I am running a dicom receiver on a Centos 6 box on top of a Xen server. If I attempt to send data to it from a remote server I get the following error: storescp: relocation error: /lib/libresolv.so.2: symbol memcpy, version GLIBC_2.0 not defined in file libc.so.6 with link time reference If I send data to the server locally it works, but sending to it from remote gives the above error. I do not think this is a problem that is specific to the storescp server.

  Read the article

• Linux: grab audio from a video clip

  - by liori

  Hello, I'd like to take audio track from a video clip in FLV container and save it to something playable by portable music players. Are there any easy to use tools for that? I know how to do that using console tools (mplayer+lame/oggenc), but I'd like to get something clickable, preferably for GNOME. Thanks!

  Read the article

• How do I configure a guest VM's static IP address automatically in Citrix XenServer?

  - by Kev

  To facilitate automation of guest VM provisioning, how do I set (in a script) the IP address on a guest VM's NIC (or NIC's) once a new VM has booted? Is there a way to "inject" netsh commands via the Citrix guest OS tools (for Windows for example) once the host has started? Or can this be done via the Citrix API/SDK or the xe tools? These are windows 2008 servers that have been sysprep'd so when the boot for the first time they have no IP address.

  Read the article

• ntpdate works, but ntpd can't synchronize

  - by dafydd

  This is in RHEL 5.5. First, ntpdate to the remote host works: $ ntpdate XXX.YYY.4.21 24 Oct 16:01:17 ntpdate[5276]: adjust time server XXX.YYY.4.21 offset 0.027291 sec Second, here are the server lines in my /etc/ntp.conf. All restrict lines have been commented out for troubleshooting. server 127.127.1.0 server XXX.YYY.4.21 I execute service ntpd start and check with ntpq: $ ntpq ntpq> peer remote refid st t when poll reach delay offset jitter ============================================================================== *LOCAL(0) .LOCL. 5 l 36 64 377 0.000 0.000 0.001 timeserver.doma .LOCL. 1 u 39 128 377 0.489 51.261 58.975 ntpq> opeer remote local st t when poll reach delay offset disp ============================================================================== *LOCAL(0) 127.0.0.1 5 l 40 64 377 0.000 0.000 0.001 timeserver.doma XXX.YYY.22.169 1 u 43 128 377 0.489 51.261 58.975 XXX.YYY.22.169 is the address of the host I'm working on. A reverse lookup on the IP address in my ntp.conf file validates that the ntpq output is correctly naming the remote server. However, as you can see, it appears to just roll over to my .LOCL. time server. Also, ntptrace just returns the local time server, and ntptrace XXX.YYY.4.21 times out. $ ntptrace localhost.localdomain: stratum 6, offset 0.000000, synch distance 0.948181 $ ntptrace XXX.YYY.4.21 XXX.YYY.4.21: timed out, nothing received ***Request timed out This looks like my ntp daemon is just querying itself. I am thinking about the possibility that the router-I-don't-control between my test network timeserver and the corporate network timeserver is blocking on source port. (I think ntpdate sends on port 123, which gets it around that filter and is why I can't use it while ntpd is running.) I have email in to the network folks to check that. Finally, telnet XXX.YYY.4.21 123 never times out or completes a connection. The questions: What am I missing, here? What else can I check to try to figure out where this connection is failing? Would strace ntptrace XXX.YYY.4.21 show me the source port ntptrace is sending from? I can deconstruct most strace calls, but I can't figure out the location of that datum. If I can't directly examine the gateway router between my test network and the timeserver, how might I build evidence that it's responsible for these disconnections? Alternately, how might I rule it out?

  Read the article

• rsync not writing files

  - by Cyrcle

  I'm trying to setup rsync to backup a remote directory to my local drive. I cd to the directory that I want to pull the files to, then I enter: rsync -vrtW [email protected]:~/public_html I enter the password then it starts running. I get all the files listed, but none of them actually transfer. What am I missing? Thanks

  Read the article

• General guidelines / workflow to convert or transfer video "professionally"?

  - by cloneman

  I'm an IT "professional" who sometimes has to deal with small video conversion / video cutting projects, and I'd like to learn "the right way" to do this. Every time I search Google, there's always a disaster for weird, low-maturity trialware, or random forums threads from 3-4 years ago indicating various antiquated method to do it. The big question is the following: What are the "general" guidelines and tools to transcode video into some efficient (lossless?) intermediary, for editing purposes, for the purpose of eventually re-encoding it after? It seems to me like even the simplest of formats and tasks are a disaster of endless trial & error, or expertise only known by hardened experts who have a swiss army kife of weird conversion tools that they use, almost as if mounting an attack against the project. Here are a few cases in point: Simple VOB files extracted from DVD footage can't be imported into Adobe Premiere directly. Virtualdub is an old software people keep recommending but doesn't seem to support newer formats. I don't even know how to tell with certainty which codecs a video has, and weather the image is interlaced or not, and what resolution and codecs I'm dealing with. Problems: Choosing a wrong interlace option which diminishes quality Choosing a wrong pixel aspect ratio (stretches the image) Choosing a wrong "project type" in Premiere causing footage to require scaling Being forced to use some weird program that will have any number of negative effects What I'm looking for: Books or "Real knowledge" on format conversions, recognized tools, etc. that aren't some random forum guides on how to deal with video formats. Workflow guidelines on identifying a format going from one format to another without problems as mentioned above. Documentation on what programs like Adobe Premiere can and can't do with regards to formats, so that I don't use a wrench as a hammer. TL;DR How should you convert or "prepare" a video file to ensure it will be supported by Premiere for editing? Is premiere a suitable program to handle cropping, encoding, or should other tools be used for this, when making a video montage from a variety of source formats? What are some good books to read that specifically deal with converting videos that use any number of codecs?

  Read the article

• What would cause my SendMail server not to acknowledge receiving a TCP Sequence?

  - by Mike B

  My TCP/IP Stack knowledge is a little rusty so please bear with me.... I have a CentOS 5.7 server with SendMail and am having seeing intermittent timeout issues sending email (particularly larger email) to other remote domains. It doesn't happen with all attachments or recipient domains. Just some. After some extended troubleshooting, I think I've narrowed it down to TCP Sequences not being acknowledged. Here's a breakdown of the TCP session from a packet capture I collected directly on my MTA (fooMTA): Packet 1 - 11: Standard TCP handshake followed by initial SMTP conversation. No errors. Packet #12 Recipient MTA: TCP sequence 231. Ack 91. Packet #13 FooMTA: TCP sequence 91. Ack 305. Packet #14 FooMTA: TCP sequence 1115. Ack 305. Packet #15 Recipient MTA: TCP sequence 305. Ack 2495. Packet #16 FooMTA: TCP sequence 2495. Ack 305. Packet #17 FooMTA: TCP sequence 5255. Ack 305. Packet #18: Recipient MTA: TCP sequence 305. Ack 5255. Packet #19: FooMTA: TCP sequence 6635. Ack 305. Packet #20: FooMTA: TCP sequence 8015. Ack 305. Packet #21: Recipient MTA: TCP Sequence 305. Ack 8015. Packet #22: FooMTA: TCP Sequence 10775. Ack 305. Packet #23: FooMTA: TCP Sequence 13535. Ack 305. Packet #24: Recipient MTA: TCP sequence 305. Ack 10775 Packet #25: FooMTA: TCP Sequence 14915. Ack 305 It keeps going like this with my server still thinking it hasn’t received sequence 305… in response the remote side eventually retransmits its prior data thinking that it never arrived. Eventually the gap gets so large that no new data is sent and the remote MTA keeps retransmitting old stuff. This contributes to an exponential backoff and eventually the remote side gives up. What’s strange to me is that I see the “missing” TCP sequence (305 in this case) arriving back to my server (via a packet capture collected directly from fooMTA) So I don’t get why my server keeps asking for it. Could this be firewall related? What would be the next step in troubleshooting?

  Read the article

• Creating rescue / install USB flash disk for CentOS

  - by wwwpanda

  For CentOS installation CDs, you can install OS, as well as booting into "rescue" mode so that you can do a chroot mount on the system partition for problem solving, even the system is installed in hardware RAID drives. How can we create a similar thing but on usb flash drive? I tried to do it with unetbootin, but when booting into the USB, eventually the CentOS setup still requires presence of CDs. Ultimately, I want to use this usb flash drive for remote disaster recovery through say HP iLo remote console / Dell iDrac etc.

  Read the article

• How to control DVR connected cameras as IP Cameras

  - by Ajay

  We have analog IR cameras (not IP Cameras) and they are connected to DVR model no is (DVR Model: DVR H264, 16 Channel - ECOR264-16X1). We assigned a static IP to DVR and able to view all the cameras connected to it. Our requirement is to view individual cameras and recording option in remote location (the recorded data should store in remote) as like IP Cameras. Is it possible, if not, are there any DVR Model which can support like this.

  Read the article

• Version control with no server installation

  - by Francisco Garcia

  I have ssh access to many servers where I have no root privileges. Do you know of any version control utility that can work with remote ssh repositories whichout installing anything on the remote server? I have tried a bare git repository folder, but it seems to demand some script/binary/installation on the server. I also dont like git because it is not very portable. The portable versions are made of too many files

  Read the article

• Page layout software that allows mixed visual and programatic editing

  - by Justin Love

  I'd like to use a programming model for custom graphics and precision placement, and an interactive visual mode for large scale layout and less precise placements. I've used tools (PostScript, various vector drawing programs) that do one of these modes well, but leave me pining for the other model. Which tools should I be investigating? I'm currently on OS X. Examples: Creating diagrams with precise spacing, sets of cards, either likely drawing from some sort of data.

  Read the article

• How to discover which name/address connections from one network to another uses?

  - by Jader Dias

  In MySQL you have to authorized a user based on the name of the origin network. From my network to a remote one all connections appear as sent from mail.mycompany.com. But connections to another remote network it appears with a different origin. How to discover which name/ip it is using? I tried tcpdump and netstat in the destination but it is difficult to find my connection among billions of others. In my case the destination is a Windows Server 2003

  Read the article

• SSHFS on startup CentOS 6.3

  - by salamis

  I edited the file /etc/rc.d/rc.local and added the following lines in order to mount a remote directory through sshfs at boot time: su user -c "/usr/bin/sshfs -o idmap=user -o reconnect -o allow_other -o uid=500 -o gid=500 user@remote:/home/shares/allusers /home/user/mnt" The problem is that is not mounting the directory on startup but when I execute this command manually after logging in everything works as expected an the directory is mounted. Any suggestions?

  Read the article

• How to measure TCP connection time in Linux

  - by Paul Draper

  I want to measure the overhead in creating a TCP connection. I know of many tools like hping and netperf, but they seem oriented at measuring latency. I want to know how long the 3-way handshake takes, and allocating any buffers, etc., and then closing it. So I want to open a real, legitimate TCP connection, and then close it. Are there any tools that will do that and help me measure performance?

  Read the article

< Previous Page | 239 240 241 242 243 244 245 246 247 248 249 250  | Next Page >