Search Results

Search found 7542 results on 302 pages for 'debug backtrace'.

Page 244/302 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

• UITableView UITableViewCell dynamic UILabel Height storyboard

  - by Mikel Nelson

  This isn'an a question, just a results log on an issue I had with XCode 4.5 storyboards and dynamic height UITableCell with a UILabel. The issue was; the initial display of a cell would only show part of the resized UILabel contents, and that the visual UILabel was not resized. It would only display correctly after scrolling off the top of the Table and back down. I did the calculations in hieghtForRowAtIndexPath and sizeToFit the UILabel in rowAtIndexPath. The sizes where coming up ok in debug, but the device was not updating the display with the correct size and UILable.text value. I had created the dynamic UITableCell in a storyboard. However, I had set the width and height to a nominal value (290x44). It turns out, this was causing my issues. I set the width and height to zero (0) in the story board, and everything started working correctly. (i.e. the UILabels displayed at the correct size with full content). I was unable to find anything online on this issue, except for some references to creating the custom table cell with a frame of zero. Turns out, that was really the answer (for me).

  Read the article

• Form Encoding Problems on GRAILS 2.0

  - by ArmlessJohn

  I have an Grails application that is configured everywhere to function as UTF-8. While running a debug version, headers say Content-Type:text/html;charset=utf-8, and meta tags agree. Browser identified page as UTF-8 and shows characters correctly. When posting a form, the browser correctly sends it encoded as UTF-8. When reading the data via params.paramname, however, the data looks garbled; maçã becomes maçã. Upon further inspection, it seems the form is sending UTF-8 data, but Grails seem to try and read it as if it was ISO-8859-1. Setting accept-charset="ISO-8859-1" on the form confirms this problem, as it fixes the problem. I also have this on applicationContext.xml: <bean id="characterEncodingFilter" class="org.springframework.web.filter.CharacterEncodingFilter"> <property name="encoding"> <value>utf-8</value> </property> <property name="forceEncoding"> <value>true</value> </property> </bean> Is there an solution for this besides adding accept-charset="ISO-8859-1" to all forms in the application? Thanks.

  Read the article

• Developing ASP.Net User Control to be imported to SharePoint MOSS 2007

  - by Don Kirkham

  Apologies if this has been answered, but I could not find a similar question: I am developing a webpart for MOSS 2007. I am using WSPBuilder to built a visual webpart (ascx) and everything works fine, but the development/debug cycle is just painfully slow, so I'd like to know if it is possible (without being too painful) to develop the user control faster using an .Net Web Application project with all of the nice F5 debugging, then import the final product into my SharePoint visual webpart. The user control interacts with a LOB system (SQL) and does not reference the SharePoint API at all. (The reason I am building this as a webpart is because I don't need another web app to run this one page, so putting it into a webpart on a new webpart page on my existing site is the best solution IMO.) I would obviously need to import (reference?) my data access classes into my "temp" web app, but think that would not be too much trouble. I realize this will be extra effort to get this set up, but am thinking the payoff will be reduced development time of the actual user control using a little web application vs having to use the compile/build WSP/deploy WSP/reset ISS/test/make a change/repeat cycle that MOSS requires. (I guess SP2010/VS2010 has spoiled me with the native SharePoint tools available.)

  Read the article

• Unable to create a breakpoint in Eclipse and Tomcat

  - by Traroth

  Since yesterday, I get a strange error message when I start my Tomcat (6.0.35) under Eclipse Juno (build 20120614-1722): Among the things I tried in order to get rid of the error: Check in Preferences - Java - Compiler if all "Classfile Generation" checkboxes where checked. I did that for both general preferences and project preference Uncheck them, build, check them build again (found on another question) Add org.eclipse.jdt.core.compiler.debug.lineNumber=generate to my .settings/org.eclipse.jdt.core.prefs file Use a new CVS checkout (same symptoms) And now, I don't know what to do anymore. The problem is really stopping me from get anything done. I can't work anymore. Crazy is: the problem doesn't happen on every class, only on some of them. Neither does it happen on my other Eclipse projects. And it didn't happen before yesterday, even if I can't remeber having done anything weird. Actually, I have never seen a problem like this in almost 10 years I'm using Eclipse... If you have any idea, I would be really grateful... Edit: I also tried to ignore the message and go on with my tests: If I create another breakpoint upstream from my problematic class, when I enter this problematic class, it tries to open a $Proxy132 class, which means it actually opens an empty page, with a source not found message

  Read the article

• LuaEdit can't find module when Lua files all in the same folder

  - by joverboard

  I downloaded LuaEdit to use as an IDE and debug tool however I'm having trouble using it for even the simplest things. I've created a solution with 2 files in it, all of which are stored in the same folder. My files are as follows: --startup.lua require("foo") test("Testing", "testing", "one, two, three") --foo.lua foo = {} print("In foo.lua") function test(a,b,c) print(a,b,c) end This works fine when in my C++ compiler when accessed through some embed code, however when I attempt to use the same code in LuaEdit, it crashes on line 3 require("foo") with an error stating: module 'foo' not found: no field package.preload['foo'] no file 'C:\Program Files (x86)\LuaEdit 2010\lua\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\lua\foo\init.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo\init.lua' no file '.\foo.lua' no file 'C:\Program Files (x86)\LuaEdit 2010\foo.dll' no file 'C:\Program Files (x86)\LuaEdit 2010\loadall.dll' no file '.\battle.dll' I have also tried creating these files prior to adding them to a solution and still get the same error. Is there some setting I'm missing? It would be great to have an IDE/debugger but it's useless to me if it can't run linked functions.

  Read the article

• Why is Request not available for my PDF request?

  - by Beska

  We're trying to create a .NET aspx page that will have a PDF within it. Doing this by hardcoding it is easy. <object height="1250px" width="100%" type="application/pdf" data="our.pdf"> <param value="our.pdf" name="src" /> <param value="transparent" name="wmode" /> </object> (don't worry too much about the transparent thing...we're doing that for other reasons...but I include it here "just in case".) The problem is when we want to generate the PDF dynamically. Our code to populate the literal on the front end looks like this: ltrPDF.Text = String.Format("<object height=\"1250px\" width=\"100%\" type=\"application/pdf\" data=\"ourPdfGenerator.aspx?var0={0}&var1={1}&var2={2}\">", var0, var1, var2); ltrPDF.Text += String.Format("<param value=\"ourPdfGenerator.aspx?var0={0}&var1={1}&var2={2}\">", var0, var1, var2); ltrPDF.Text += "<param value=\"transparent\" name=\"wmode\"/>"; ltrPDF.Text += "</object>"; Kind of ugly, but it seems like it should work. But it doesn't. When I debug, and put a breakpoint on the first line of ourPdfGenerator.aspx.cs Page_Load method, I reach the breakpoint without any difficulty. However, the first thing we do is try to use Request.QueryString: string var0 = Request.QueryString["var0"]; which immediately throws an HttpException: "Request is not available in this context." I'm not clear on: Why isn't it available? What can I do about it?

  Read the article

• How to (kindly) ask your users to upgrade from IE6?

  - by nickf

  It's no secret at all that IE6 has been a major roadblock to the advancement of the web over the last few years. I couldn't count the number of hours I've spent bashing my head against a wall trying to fix or debug IE6 issues. The way I see it, there are two types of IE6 user. a) the poor corporate schmoe whose IT department doesn't want to upgrade in case something breaks, and b) the mums and dads of the world who think the internet is the blue E on their desktop (and I don't mean that in a nasty way). There's probably a couple of people who know about all the other browsers, but still choose to run IE6. They get what they deserve, IMO. Anyway, getting to the point, I'd say that 90% of my IE6-using visitors are in the the mums and dads category - they're not stupid, they just don't know WHY they should upgrade to IE7 or Firefox or whatever. How do I educate these people without pissing them off? Is there a nice and friendly website I can direct these people to, which explains the reasons for upgrading in plain language? Any mention of "security" or "web standards" I think would just come across as scary. I've just seen http://www.whatbrowser.org which seems to fit the bill nicely. It explains in very basic terms: what a web browser is why you'd want to upgrade it how old your current browser is (subtle hint to those with a 9 year old browser) ..aaaand it's in 22 languages. It's from Google but displays no bias (it links to Firefox, Chrome, Opera, Safari, Internet Explorer displayed in a random order).

  Read the article

• Has anyone setup tomcat to run virtual hosts using mod_jk

  - by Adam

  I work in OSX primarily with mostly PHP. Normally I work locally using MAMP and virtual hosts setup in my httpd.conf so that I can point a browser to http://some-project and have as many projects as I need setup. We have a project coming up where we need to serve JSP pages and I would like to set up my local apache server to serve only JSP files to Tomcat and everything else to MAMP using the same virtual hosts setup in: ~/applications/MAMP/conf/apache/httpd.conf So far I have: Successfully installed Tomcat Placed mod_jd.so in ~/applications/MAMP/Library/modules/mod_jk.so Added the module by placing: LoadModule jk_module modules/mod_jk.so in ~/applications/MAMP/conf/apache/httpd.conf Created /Library/Tomcat/Home/conf/jk/workers.properties and added the following lines: workers.tomcat_home=/Library/Tomcat workers.java_home=/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home ps=/ worker.list=ajp12, ajp13 worker.ajp13.port=8009 worker.ajp13.host=localhost worker.ajp12.type=ajp13 worker.ajp13.mount=/*.jsp added the following lines: JkWorkersFile /Library/Tomcat/Home/conf/workers.properties JkLogFile /Library/Tomcat/Home/logs/mod_jk.log JkLogLevel debug to ~/applications/MAMP/conf/apache/httpd.conf I cannot start my MAMP however when these last two lines are present in my httpd.conf. Does anyone work like this? Any tips? Any clear ideas of what I'm doing wrong?

  Read the article

• Upgraded to Xcode 4 -- Endless stream of duplicate symbol errors causing build errors

  - by D-Nice

  Everything was working perfectly fine in Xcode 3 yesterday before I upgraded. So I completed the upgrade, restarted my computer, and opened my old project. I had to reconfigure a few settings like the header paths so that I could begin to compile. I'm using AdWhirl for ad mediation, and at this point my errors begin to read something like duplicate symbol _OBJC_METACLASS_$_SBJSON in /Users/Admin/Desktop/TMapLiteAdwhirl/AdWhirl/MMSDK/libMMSDK.a(SBJSON.o) and /Users/Admin/Library/Developer/Xcode/DerivedData/TruxMapLite-bgpylibztethnlhkfkdumpvrjvgy/Build/Intermediates/TruxMapLite.build/Debug-iphoneos/TruxMapLite.build/Objects-normal/armv6/SBJSON.o for architecture armv6 The library it's referring to is the SDK for one of the ad networks I'm including in AdWhirl. Both of the 'duplicate symbols' refer to the SAME FILE, but they use different paths. If I had still had XCode 3, I would simply try excluding these libraries from the build path, but I have no idea how that can be done in Xcode 4. I've tried everything all the way down to deleting the library and all associated files from my project, but when I do this, i will simply get the same type of error for a different library in the AdWhirl directory. This is incredibly frustrating because before my upgrade everything was working smoothly and I was prepared to submit my binary. If anyone has any advice, id be more than happy to give it a try. Thanks!

  Read the article

• How can I change the Python that my Django project is using?

  - by Burak

  I have 2 versions installed in my server. I used virtualenv to install Python 2.7. I am using WSGI to deploy my project. WSGIPythonPath /home/ENV/lib/python2.7/site-packages WSGIScriptAlias / /var/www/html/my_project/wsgi.py My http.conf is like that. python -V gives Python 2.7.3 But in my projects Debug window, it says Django is using 2.6.8. Where am I wrong? UPDATE: Here is my wsgi file import os import sys sys.path.append('/var/www/html') os.environ.setdefault("DJANGO_SETTINGS_MODULE", "myproject.settings") from django.core.wsgi import get_wsgi_application application = get_wsgi_application() Python Version: 2.6.8 Python Path: ['/home/ENV/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg', '/home/ENV/lib/python2.7/site-packages/pip-1.1-py2.7.egg', '/home/ENV/lib/python2.7/site-packages/Django-1.4-py2.7.egg', '/home/ENV/lib/python2.7/site-packages', '/usr/lib/python2.6/site-packages/pip-1.1-py2.6.egg', '/usr/lib/python2.6/site-packages/django_transmeta-0.6.7-py2.6.egg', '/usr/lib/python2.6/site-packages/ipython-0.13-py2.6.egg', '/usr/lib/python2.6/site-packages/virtualenv-1.7.2-py2.6.egg', '/usr/lib64/python26.zip', '/usr/lib64/python2.6', '/usr/lib64/python2.6/plat-linux2', '/usr/lib64/python2.6/lib-tk', '/usr/lib64/python2.6/lib-old', '/usr/lib64/python2.6/lib-dynload', '/usr/lib64/python2.6/site-packages', '/usr/lib64/python2.6/site-packages/gtk-2.0', '/usr/lib/python2.6/site-packages', '/usr/lib/python2.6/site-packages/setuptools-0.6c11-py2.6.egg-info', '/var/www/html'] In my error_log of httpd: [Tue Jul 10 20:51:29 2012] [error] python_init: Python version mismatch, expected '2.6.7', found '2.6.8'. [Tue Jul 10 20:51:29 2012] [error] python_init: Python executable found '/usr/bin/python'. [Tue Jul 10 20:51:29 2012] [error] python_init: Python path being used '/usr/lib64/python26.zip:/usr/lib64/python2.6/:/usr/lib64/python2.6/plat-linux2:/usr/lib64/python2.6/lib-tk:/usr/lib64/python2.6/lib-old:/usr/lib64/python2.6/lib-dynload'.

  Read the article

• What is the best practice for including third party jar files in a Java program?

  - by ZoFreX

  I have a program that needs several third-party libraries, and at the moment it is packaged like so: zerobot.jar (my file) libs/pircbot.jar libs/mysql-connector-java-5.1.10-bin.jar libs/c3p0-0.9.1.2.jar As far as I know the "best" way to handle third-party libs is to put them on the classpath in the manifest of my jar file, which will work cross-platform, won't slow down launch (which bundling them might) and doesn't run into legal issues (which repackaging might). The problem is for users who supply the third party libraries themselves (example use case, upgrading them to fix a bug). Two of the libraries have the version number in the file, which adds hassle. My current solution is that my program has a bootstrapping process which makes a new classloader and instantiates the program proper using it. This custom classloader adds all .jar files in lib/ to its classpath. My current way works fine, but I now have two custom classloaders in my application and a recent change to the code has caused issues that are difficult to debug, so if there is a better way I'd like to remove this complexity. It also seems like over-engineering for what I'm sure is a very common situation. So my question is, how should I be doing this?

  Read the article

• NHibernate's ISQLQuery returns instances that are of an unexpected type.

  - by Frederik Gheysels

  Hi all, I'm using NHibernate 2.1.2.400, and I'm having an issue with a an ISQLQuery query. The reason why I use an ISQLQuery here, is that this query uses a table for which I have no entity mapped in NHibernate. The query looks like this: ISQLQuery query = session.CreateSQLQuery ( "select p.*, price.* " + "from prestation p left outer join prestationprice price on p.PrestationId = price.PrestationId " + "where p.Id IN ( select id from prestationregistry where ..."); 'Prestationregistry' is the table that is not known by NHibernate (unmapped, so therefore the native SQL Query). my code continues like this: query.AddEntity ("p", typeof(Prestation)); query.AddJoin ("price", typeof(PrestationPrice)); query.SetResultTransformer (Transformers.DistinctRootEntity); var result = query.List(); So far so good. I expect that I'm given a list of 'Prestation' instances as a result of this query, since I declared 'Prestation' as being the root-object that has to be returned by the AddEntity method. I also expect that the PrestationPrices for each Prestation are eagerly loaded by this query (hence the AddJoin method). To my surprise, the List() method returns a collection of PrestationPrice instances instead of Prestation instances. How come ? Am I doing something wrong ? And if so, could you be so kind to tell me what I'm doing wrong ? Edit: Additional Info: When I debug, and put a watch on the 'query' instance, I can see that the queryReturns member of the query contains 2 items: - one NativeSqlQueryRootReturn instance who'se ReturnEntityName is 'Prestation' - one NativeSqlQueryJoinReturn When I do not specify the 'DistinctRootEntity' result transformer, the query returns instances of 'Prestation' instead of PrestationPrice. However, it contains multiple copies of the same instance.

  Read the article

• WCF cross-domain policy security error

  - by George2

  Hello everyone, I am using VSTS 2008 + C# + WCF + .Net 3.5 + Silverlight 3.0. I host Silverlight control in an html page and debug it from VSTS 2008 (press F5, then run in VSTS 2008 built-in ASP.Net development web server), then call another WCF service (hosted in another machine running IIS 7.0 + Vista). The WCF service is very simple, just return a constant string to client. When invoking the WCF service from Silverlight, I got the following error message, An error occurred while trying to make a request to URI 'https://LabTest/Test.svc'. This could be due to attempting to access a service in a cross-domain way without a proper cross-domain policy in place, or a policy that is unsuitable for SOAP services. You may need to contact the owner of the service to publish a cross-domain policy file and to ensure it allows SOAP-related HTTP headers to be sent. This error may also be caused by using internal types in the web service proxy without using the InternalsVisibleToAttribute attribute. Please see the inner exception for more details. Here is the clientaccesspolicy.xml file, anything wrong? <?xml version="1.0" encoding="utf-8" ?> <access-policy> <cross-domain-access> <policy> <allow-from http-request-headers="*"> <domain uri="*"> </domain> </allow-from> <grant-to> <resource path="/" include-subpaths="true"></resource> </grant-to> </policy> </cross-domain-access> </access-policy> thanks in advance, George

  Read the article

• How should I configure grub for booting linux kernel from a USB hard drive?

  - by skolima

  I have a laptop hard drive in an external enclosure which I use as a large pendrive. For an added twist, I have installed Linux on it, so I can boot any machine with my distribution of choice (e.g. for data recovery or repairing a b0rked system or just using a borrowed laptop without destroying the preinstalled Windows). The problem is that, depending on the hardware configuration, the USB hard drive may be visible under different paths. For grub configuration I just use (hda0,0) as it is relative to the device the grub was launched from. I have UUID entries in /etc/fstab. I also specify rootwait in the kernel parameters so that it waits for the USB subsystem to settle down before trying to mount the device. What should I pass to the kernel as root= ? Currently boot from the pendrive once, check the debug messages to see what /dev/sdX device has been assigned to the USB drive by the kernel, then reboot and edit the grub configuration. I can't change anything on the PC besides enabling Boot from USB hard drive in BIOS and setting it to higher priority than internal hard drives. There are various initrd generating scripts which include support for UUID in root device path, unfortunately the Gentoo native one (genkernel) does not support rootwait and I had no luck trying to use others. The boot process goes like this (it is quite similar in Windows): The BIOS chooses the boot device and loads whatever is its MBR (which happens to be grub stage-1). Grub loads it's configuration and stage-2 files from device it has set as root, using (hd0) for the device it was loaded from by BIOS. Grub loads and starts a kernel (still the same numbering, so I can use (hd0,0) again ). Kernel initializes all built-in devices (rootwait does it's magic now). Kernel mounts the partition it was passed as root (this is a kernel parameter, not grub parameter). init.d starts the userland booting process, including mounting things from /etc/fstab. Part 5 is the one giving me problems.

  Read the article

• MinGW-gcc PCH not speeding up wxWidget build times. Is my setup correct?

  - by Victor T.

  Hi all, I've been building wxMSW 2.8.11 with the latest stable release of mingw-gcc 4.5.1 and I'm trying to see if the build could be sped up using precompiled headers. My initial attempts at this doesn't seem to work. I basically followed the given instructions here. I created a wxprec.h precompiled header with the following: g++ -O2 -mthreads -DHAVE_W32API_H -D__WXMSW__ -DNDEBUG -D_UNICODE -I..\..\lib\gcc_dll\mswu -I..\..\include -W -Wall -DWXBUILDING -I..\.. \src\tiff -I..\..\src\jpeg -I..\..\src\png -I..\..\src\zlib -I..\..\src \regex -I..\..\src\expat\lib -DwxUSE_BASE=1 -DWXMAKINGDLL -Wno-ctor- dtor-privacy ../../include/wx/wxprec.h That does successfully create a wxprec.h.gch that's about ~1.6meg in size. Now I proceed to build wxmsw using the follow make command from cmd.exe shell: mingw32-make -f makefile.gcc While, the build does succeed I noticed no speedup whatsoever then if pch wasn't used. To make sure gcc was actually using the pch I added -H in the config.gcc and did another rebuild. Indeed, the outputted include list does show a '!' next to the wxprec.h so gcc is supposely using it. What's the reason for pch not working? Did I setup the precompiled headers correctly or am I missing a step? Just for reference comparison, here's the compile times I get when building wxmsw 2.8.11 with the other compilers(visual studio 2010 and C++ Builder 2007). The time savings is pretty significant. | | release, pch | release, nopch | debug, nopch ------------------------------------------------------- | gcc451 | 8min 33sec | 8min 17sec | 8min 49sec | msc_1600 | 2min 23sec | 13min 11sec | -- | bcc593 | 0min 59sec | 2min 29sec | -- Thanks

  Read the article

• iPhone - Problem with in-app purchases

  - by Satyam svv

  I've created iPhone app with in-app purchase. Now, I'm in testing phase. I created provisioning profile com.satyam.testapp In iTunes connected I created the application and uploaded the images, screen shots, desscription etc. I also created two id's for in-app purchase. One is com.satyam.testapp.book1 and the other one is com.satyam.testapp.book5 I created test account also for verifying my in-app purchases. Using com.stayam.testapp i created developer test profile and using the same in my developed application. I logged out the itunes app store account in my iphone. Now i started running my application on my iphone. Its saying that no items are there to purchase. But its not even asking me for credentials where i've to enter test account username and password..... how to debug it? Here's my delegate: - (void)productsRequest:(SKProductsRequest *)request didReceiveResponse:(SKProductsResponse *)response { NSArray *myProduct = [[NSArray alloc] initWithArray:response.products]; for(int i=0;i<[myProduct count];i++) { SKProduct *product = [myProduct objectAtIndex:i]; NSLog(@"Name: %@ - Price: %f",[product localizedTitle],[[product price] doubleValue]); NSLog(@"Product identifier: %@", [product productIdentifier]); } for(NSString *invalidProduct in response.invalidProductIdentifiers) NSLog(@"Problem in iTunes connect configuration for product: %@", invalidProduct); [request autorelease]; [myProduct release]; }

  Read the article

• Logging to a file on Android

  - by Greg B

  Is there any way of retrieving log messages from an Android handset. I'm building an application which uses the GPS of my HTC Hero. I can run and debug the application from eclipse but this isn't a good use case of GPS, sat at my desk. When I fire the app up when I am walking around, I get an intermittent exception. Is there anyway I can output these exceptions to a text file on the SD card or output calls to Log.x("") to a text file so that I can see what the exception is. Thanks EDIT : Solution Here is the code I finally went with... Thread.currentThread().setUncaughtExceptionHandler(new Thread.UncaughtExceptionHandler() { @Override public void uncaughtException(Thread thread, Throwable ex) { PrintWriter pw; try { pw = new PrintWriter( new FileWriter(Environment.getExternalStorageDirectory()+"/rt.log", true)); ex.printStackTrace(pw); pw.flush(); pw.close(); } catch (IOException e) { e.printStackTrace(); } } }); I had to wrap the line pw = new PrintWriter(new FileWriter(Environment.getExternalStorageDirectory()+"/rt.log", true)); in a try/catch as Eclipse would not let me compile the app. It kept saying Unhandled exception type IOException 1 quick fix Sorround with try/catch So I did and it all works which is fine by me but it does make me wonder what Eclipse was on about...

  Read the article

• VS 2008 debugger: How does it decide what Cassini port to run a web service under?

  - by BDW

  I have a VS 2008 solution that includes a web site and a web service. I'm developing both at once, and it's helpful to be able to debug from one into the other. It occasionally can't find the web service. If I look in the web.config, I find the port number it's looking at is not the port number it auto-runs the service in when I use the debugger. For example, the web.config reference says something like: add key="mynamespace.mywebservice" value="http://localhost:55765/mywebservice.asmx" When I hover over the Cassini port icon, I find that the web service is running in port 55382 (or some other non-55765 port). No wonder it can't find it. Is there a way to enforce that the port number it runs under is the one specified in the web config? And if it's not using the web config port number to figure out where to run it... where does it decide? I know in VS2005, there was a way to specify the port number to use when debugging, but I can't find that anywhere in the web service project in VS 2008. This is really going to cause problems as more developers come on to this project - how can I fix it? Deleting and re-adding the web services to the project fixes it, but I'd literally have to do it a couple times a day, not an ideal solution.

  Read the article

• gwtQuery's outerWidth(true) and IE8 not working without putting a delay

  - by Christopher

  I recently came across an odd behavior when trying to calculate the width (with margins) of an element using gwtQuery. The goal is to get the width (including padding, borders and margins) of a given element as a child of a certain parent. This parent may define specific CSS rules for some children so I clone it, add my element to this parent, call .outerWidth(true) to get the width and finally remove the clone from the parent. It works fine on Chrome, Firefox and IE 10, but randomly fails (outputs 0) on IE 8. However I noticed that if I put a "sleep" between the moment I add the element to the DOM and the moment I get the outer width, it always succeeds. I obviously don't want to keep that sleep. So my question is does anyone has any insights on how to work around this behavior or even a better way of achieving the same goal? Thank you! Here's a code snippet private Integer computeTabWidth(IsWidget tab) { GQuery $tab = $("<li></li>").append($(tab).clone()); $(containerPanel).append($tab); // IE 8 debug. sleep(100); Integer tabWidth = $tab.outerWidth(true); $tab.remove(); return tabWidth; } private void sleep(int i) { long time = new Date().getTime() + i; while (time > new Date().getTime()); }

  Read the article

• Unusual heap size limitations in VS2003 C++

  - by Shane MacLaughlin

  I have a C++ app that uses large arrays of data, and have noticed while testing that it is running out of memory, while there is still plenty of memory available. I have reduced the code to a sample test case as follows; void MemTest() { size_t Size = 500*1024*1024; // 512mb if (Size > _HEAP_MAXREQ) TRACE("Invalid Size"); void * mem = malloc(Size); if (mem == NULL) TRACE("allocation failed"); } If I create a new MFC project, include this function, and run it from InitInstance, it works fine in debug mode (memory allocated as expected), yet fails in release mode (malloc returns NULL). Single stepping through release into the C run times, my function gets inlined I get the following // malloc.c void * __cdecl _malloc_base (size_t size) { void *res = _nh_malloc_base(size, _newmode); RTCCALLBACK(_RTC_Allocate_hook, (res, size, 0)); return res; } Calling _nh_malloc_base void * __cdecl _nh_malloc_base (size_t size, int nhFlag) { void * pvReturn; // validate size if (size > _HEAP_MAXREQ) return NULL; ' ' And (size _HEAP_MAXREQ) returns true and hence my memory doesn't get allocated. Putting a watch on size comes back with the exptected 512MB, which suggests the program is linking into a different run-time library with a much smaller _HEAP_MAXREQ. Grepping the VC++ folders for _HEAP_MAXREQ shows the expected 0xFFFFFFE0, so I can't figure out what is happening here. Anyone know of any CRT changes or versions that would cause this problem, or am I missing something way more obvious?

  Read the article

• Flex profiling - what is [enterFrameEvent] doing?

  - by Herms

  I've been tasked with finding (and potentially fixing) some serious performance problems with a Flex application that was delivered to us. The application will consistently take up 50 to 100% of the CPU at times when it is simply idling and shouldn't be doing anything. My first step was to run the profiler that comes with FlexBuilder. I expected to find some method that was taking up most of the time, showing me where the bottleneck was. However, I got something unexpected. The top 4 methods were: [enterFrameEvent] - 84% cumulative, 32% self time [reap] - 20% cumulative and self time [tincan] - 8% cumulative and self time global.isNaN - 4% cumulative and self time All other methods had less than 1% for both cumulative and self time. From what I've found online, the [bracketed methods] are what the profiler lists when it doesn't have an actual Flex method to show. I saw someone claim that [tincan] is the processing of RTMP requests, and I assume [reap] is the garbage collector. Does anyone know what [enterFrameEvent] is actually doing? I assume it's essentially the "main" function for the event loop, so the high cumulative time is expected. But why is the self time so high? What's actually going on? I didn't expect the player internals to be taking up so much time, especially since nothing is actually happening in the app (and there are no UI updates going on). Is there any good way to find dig into what's happening? I know something is going on that shouldn't be (it looks like there must be some kind of busy wait or other runaway loop), but the profiler isn't giving me any results that I was expecting. My next step is going to be to start adding debug trace statements in various places to try and track down what's actually happening, but I feel like there has to be a better way.

  Read the article

• Bug with DataBinding in WPF Host in Winforms?

  - by Tigraine

  Hi Guys, I've spent far too much time with this and can't find the mistake. Maybe I'm missing something very obvious or I may have just found a bug in the WPF Element Host for Winforms. I am binding a ListView to a ObeservableList that lives on my ProductListViewModel. I'm trying to implement searching for the ListView with the general Idea to just change the ObservableList with a new list that is filtered. Anyway, the ListView Binding code looks like this: <ListView ItemsSource="{Binding Path=Products}" SelectedItem="{Binding Path=SelectedItem}" SelectionMode="Single"> <ListView.ItemContainerStyle> <Style TargetType="{x:Type ListViewItem}"> <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}"></Setter> </Style> </ListView.ItemContainerStyle> <ListView.ItemTemplate> <DataTemplate> <TextBlock Text="{Binding Name}"></TextBlock> </DataTemplate> </ListView.ItemTemplate> </ListView> And the ViewModel code is as vanilla as it can get: private ObservableCollection<ProductViewModel> products; public ObservableCollection<ProductViewModel> Products { get { return products; } private set { if (products != value) { products = value; OnPropertyChanged("Products"); } } } Now the problem here: Once I debug into my OnPropertyChanged method, I can see that there are no subscribers to the PropertyChanged event (it's null), so nothing happens on the UI.. I already tried Mode=TwoWay and other Binding modes, it seems I can't get the ListView to subscribe to the ItemsSource... Can anyone help me with this? I'm just about to forget about the ElemenHost and just do it in Winforms greetings Daniel

  Read the article

• VB.Net - Launch app on Windows startup

  - by Queops

  We all now the tricky folders where your application runs when you publish your VB.NET to other people, but I won't give up on the benefits of the system (auto-update, you know). Problem is: Program is supposed to startup, or not, with Windows if the user wishes so. I'm saving program preferences into My.Settings. All fine with that. If you debug it it will save the values between sessions. The problem is after deployment. I installed the program on a testing machine. Application works okay, the settings load, if it's the user launching it by themselfs (using shortcut on desktop for example). Now upon restarting the program does indeed start up as I want it to but the My.Settings don't show up! It's like the config file has been erased. If I close program and re-open by clicking shorcut it loads the settings just fine though. So I wonder what's the problem? This is the code I use to save the registry key: regKey = Registry.CurrentUser.OpenSubKey("SOFTWARE\Microsoft\Windows\CurrentVersion\Run", True) regKey.SetValue("ScapeTracker", Chr(34) & Application.ExecutablePath & Chr(34) & " startup") Does what it's supposed to. The startup parameter is needed so the program knows if it's launched on startup on not (to show up on tray and idle there until user decides to use it). So the problem is that I can't use the settings upon restart of Windows, so I'm assuming the VB.Net applications have some extra parameters when launching? How can I solve this?

  Read the article

• HTTP POST with URL query parameters -- good idea or not?

  - by Steven Huwig

  I'm designing an API to go over HTTP and I am wondering if using the HTTP POST command, but with URL query parameters only and no request body, is a good way to go. Considerations: "Good Web design" requires non-idempotent actions to be sent via POST. This is a non-idempotent action. It is easier to develop and debug this app when the request parameters are present in the URL. The API is not intended for widespread use. It seems like making a POST request with no body will take a bit more work, e.g. a Content-Length: 0 header must be explicitly added. It also seems to me that a POST with no body is a bit counter to most developer's and HTTP frameworks' expectations. Are there any more pitfalls or advantages to sending parameters on a POST request via the URL query rather than the request body? Edit: The reason this is under consideration is that the operations are not idempotent and have side effects other than retrieval. See the HTTP spec: In particular, the convention has been established that the GET and HEAD methods SHOULD NOT have the significance of taking an action other than retrieval. These methods ought to be considered "safe". This allows user agents to represent other methods, such as POST, PUT and DELETE, in a special way, so that the user is made aware of the fact that a possibly unsafe action is being requested. ... Methods can also have the property of "idempotence" in that (aside from error or expiration issues) the side-effects of N 0 identical requests is the same as for a single request. The methods GET, HEAD, PUT and DELETE share this property. Also, the methods OPTIONS and TRACE SHOULD NOT have side effects, and so are inherently idempotent.

  Read the article

• List iterator not dereferencable?

  - by Roderick

  Hi All I get the error "list iterator not dereferencable" when using the following code: bool done = false; while (!_list_of_messages.empty() && !done) { // request the next message to create a frame // DEBUG ERROR WHEN NEXT LINE IS EXECUTED: Counted_message_reader reader = *(_list_of_messages.begin()); if (reader.has_more_data()) { _list_of_frames.push_back(new Dlp_data_frame(reader, _send_compressed_frames)); done = true; } else { _list_of_messages.pop_front(); } } (The line beginning with "Counted_message_reader..." is the one giving the problem) Note that the error doesn't always occur but seemingly at random times (usually when there's lots of buffered data). _list_of_messages is declared as follows: std::list<Counted_message_reader> _list_of_messages; In the surrounding code we could do pop_front, push_front and size, empty or end checks on _list_of_messages but no erase calls. I've studied the STL documentation and can't see any glaring problems. Is there something wrong with the above code or do I have a memory leak somewhere? Thanks! Appreciated!

  Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >