Search Results

Search found 18121 results on 725 pages for 'support esemenyek'.

Page 244/725 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Consulting: Organizing site/environment documentation for customers?

    - by ewwhite
    Over time, I've taken on consulting and contract engineering work for various clients. More recently, customers are asking for certain types of documentation. These are small businesses and typically do not have dedicated technical staff. Within a single company, Wiki/Confluence/Sharepoint, etc. all make sense as a central repository for documentation and environment information. I struggle with finding a consistent method to deliver the following information to discrete customers. I'm shooting for a process that's more portable, secure and elegant than a simple spreadsheet or the dreaded binder full of outdated information. Important IP addresses, DHCP scope, etc. Network diagram (if needed). Administrative usernames and passwords and management URLs. Software license keys. Support contracts and warranty information. Vendor support contacts and instructions. I know there are other consultants here. Any suggestions or tips on maintaining documentation across multiple environments in a customer-friendly format? How do you do it?

    Read the article

  • how is the the linux console displayed to the user and how does the user go about changing the conso

    - by Chris
    I've been searching for the last two day on trying to understand how the console displays itself to the user and how to change the console settings. I've had some luck along the way but nothing that I've found has giving me a real clear explanation of how the console is displayed or how to change or control it's display settings. Some examples that of what I'm looking for are as follows: How is the console displayed on the screen? I know with X11 it uses your graphics card driver to display graphics to the screen, but how is the consoles text mode handled? Could some one ether explain this to me or point me to an in-depth overview of it all? Is it possible to have multi-head support in console mode with separate tty's on each screen? If so how would I go about setting this up? How would you go about changing the size of the console display from the default 80x25 to a custom size? I'm testing anything I find on a debian testing build, which is just the minimal base install on a virtual box. In time I will be using this information to setup my main system which is multi-head with 3 monitors. I would like to be able to support all three displays in console mode if possible.

    Read the article

  • 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

    Read the article

  • PHP on several servers with session-sharing

    - by Etu
    there's certanly other threads about this, but I have one more question. We are about to scale the website at work to have more than one server. And we need to share the sessions between the servers. We have been looking into different solutions, one in memcached and use Memcached as sessionhandler in PHP. That will probably work. And the idea would be to run memcached on every machine and let all webservers access all other servers memcached servers, and then we have shared sessions between the machines, yay. (we have no resources to setup with sticky-sessions yet, that's a later project. we need this running, and we need this running now. and we will loadbalance with DNS for a starter) But then... If I want to take one server down, say, for maintenance, or a server crashes, or whatever reason. I don't want the users to just loose their sessions and have to start from the beginning... That's why we need some kind of replication, which Memcached does not support. Then I found http://repcached.lab.klab.org/ -- which has multi-master replication of memcached, which is great, and is what I want. But does it work with 2 machines? Say 3, 5, 10? For future scaling. I also looked into redishttp://redis.io/ -- which also seems great, but is a bit more "shaky" with the php-session-handler support, and no multi-master-replication. The thing is that I like to use memcached, but I want to be able to power down one of two boxes without loosing half of the sessions. Any suggestions?

    Read the article

  • Stack Managed Switches over a distance

    - by Joel Coel
    We have several buildings with stacked switches, where the distance between the stacked units is considerable... separate floors, or at opposite ends of a hallway. They are 3Com switches that stack using cat6 cabling. These switches are coming up on 12 years old now, and as I look around at replacements it seems no one supports this scenario any more. Stacking switches want to use fiber links (it more for me to run and terminate the fiber stacking cables than to purchase the switch) or other custom cables that seem only intended to jump up to the next unit in a rack. What have others done to support stacking over a distance? I'm considering breaking up the stacked switches into separate managed entities and just bridging from the root switch in the buildings, but I'd really like to avoid that for what I hope are obvious reason. The closest thing I've found are from netgear that use hdmi cables for the stacking connection... I could try to support that by running an additional cat6 line and re-terminating both links into a single hdmi port, but I have concerns over that approach as well.

    Read the article

  • Linux: 3 Monitor PCI-e Graphics card (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. I'll post the exact error message here soon, but it's very useless. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. Thanks, Nick

    Read the article

  • NFS on top of GFS2 - does it work?

    - by Matthew
    We're currently using a NoSQL derivative called Splunk to receive our data. The software supports something called "search head pooling" in which the job-dispatching engine is housed on several servers which share a common storage point. Originally our intention was to use a clustered filesystem like GFS2 because of low latency, stability, and ease of setup. We set up GFS2, and it's working with no issues. However when trying to run the software, it's trying to create lock files, and a bunch of other things that their support team can't quite explain. Ultimate feedback from them was that they only support NFS. Our network administration team heavily frowns on NFS (lack of stability, file lock issues, etc). So, I was thinking about the possibility of setting up NFS on each server in the cluster to act as a wedge layer between the GFS2 filesystem and the software. Basically configure each server to export the GFS2 filesystem's mountpoint via NFS, and then tell each server to connect to that NFS share. That way we aren't introducing any single-points-of-failure should a dedicated NFS server go down, but the vendor gets their "required" NFS share. I'm just brainstorming ways around, so please tear this apart :)

    Read the article

  • Enterprise Redirection Services?

    - by Aaron Alton
    This is probably a case of "if I new what it was called, I could google it in 5 minutes" - but I don't know what it's called. It's probably best to explain the requirement using an example. We have a number of services (vpn, owa, etc) which we host from one of our datacenters. We have a number of datacenters, and we technically have the infrastructure already in place to support these services at a number of our datacenters. To provide access to these "services", I would create an external DNS entry (ex. VPN.MyCompany.com Gateway IP for one of my DCs), and clients will connect to it via the DNS entry. Since I have multiple datacenters that can support this service, I could theoretically offer a "highly available, geographically dispersed" solution if I could point this DNS entry to some sort of third party who offers highly available "redirection" services. If my primary site goes down, I could just make a change via some management console and configure the redirector to point to a different DC. Of course, it would be fairly straightforward to set this sort of thing up on one of our servers, but that would kinda defeat the purpose of a highly available third party. Is anyone familiar with a service like this? I'm thinking something like DynDNS, but with Enterprise availability guarantees.

    Read the article

  • VNC Server that can be used from command line?

    - by jesusiniesta
    I'm looking for a replacement for a custom vnc server that we have been using in my company for a long time. I need a simple executable that can be run from command line by an IT Support software without the user noticing it (our application will warn the user, we don't want him to see we are using that VNC sever). I need it to support Windows and preferably also OSX. The only option I've found is UltraVNC, but I can't configure it from command line to accept loopback connections without authentication. We have already a whole VNC Viewer + VNC Repeater + Bouncers architecture, and the only missing piece is the VNC Server. Do you know any solution you could suggest me? I'm afraid I'll end up developing a new VNC server myself, may be based on an open source one. EDIT: When I said I don't want the user to notice this VNC server, I should have added that I don't want him even noticing the installation. So better if it can be installed silently or can be executed as a portable executalbe (for instance, ultravnc can be installed and ran as a service from command line, or simply executed quietly, with only a notification icon; its problem is that I can't run it without authentication).

    Read the article

  • How to choose the right PHP Framework for web development?

    - by liliwang
    Hi! I'm a PHP Pro, but haven't use any PHP framework till now, so I have no clue on how to choose a PHP framework. Do you have some tips to help me choose the/a right PHP Framework? I want a stable and secure PHP framework for Projects with about 400 hours development time. It should be possible to use the framework on Shared-Hosting-Webservers. I don't need some AJAX support (I'm using extJS). It would be nice if the framework supports Rapid Application Development and object-relational mapping. Also some of the standard-functions (Authentification, form validation) would be nice. Caching would be a useful, but isn't needed. Needs for a PHP framework: Shared-Hosting-Webserver-Support for Projects between 200 und 400 hours work Developing Modell "Rapid Application Development" supported object-relational mapping supported If possible: Caching Already finished Modules (e.g. Authentification, form validation, ..) Easy to learn Which PHP framework is the right one I am seeking for?

    Read the article

  • Allow members of a group to be unlocked by a specific account on AD

    - by JohnLBevan
    Background I'm creating a service to allow support staff to enable their firecall accounts out of hours (i.e. if there's an issue in the night and we can't get hold of someone with admin rights, another member of the support team can enable their personal firecall account on AD, which has previously been setup with admin rights). This service also logs a reason for the change, alerts key people, and a bunch of other bits to ensure that this change of access is audited / so we can ensure these temporary admin rights are used in the proper way. To do this I need the service account which my service runs under to have permissions to enable users on active directory. Ideally I'd like to lock this down so that the service account can only enable/disable users in a particular AD security group. Question How do you grant access to an account to enable/disable users who are members of a particular security group in AD? Backup Question If it's not possible to do this by security group, is there a suitable alternative? i.e. could it be done by OU, or would it be best to write a script to loop through all members of the security group and update the permissions on the objects (firecall accounts) themselves? Thanks in advance. Additional Tags (I don't yet have access to create new tags here, so listing below to help with keyword searches until it can be tagged & this bit editted/removed) DSACLS, DSACLS.EXE, FIRECALL, ACCOUNT, SECURITY-GROUP

    Read the article

  • Software for RAID Failure Alerts?

    - by QF_Developer
    I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

    Read the article

  • Sudden "No Signal" in HDMI-DVI connection

    - by nazikus
    Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

    Read the article

  • Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

    - by Windex
    I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

    Read the article

  • 3 Monitor PCI-e Graphics card (without tremendous pain)?

    - by N Rahl
    As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

    Read the article

  • How to get Subversion repository from svn:// and https://?

    - by Hikari
    I know these are noob questions, but I never got my own Subversion running before and I'm kinda lost. I installed VisualSVN in Windows, but it doesn't support svn:// protocol by default, only HTTP or HTTPS. It is working fine over HTTP, and I'm able to manage it from its management tool, see its repositories and get their HTTP-based URL, and from that I'm able to use Tortoise to check out and check in. I'm able to check out from a repository URL using Tortoise: http://Main:90/svn/HikariKrumo/ But I need svn:// protocol for Redmine to access it. Redmine says to support http:// but it reports this error message: The entry or revision was not found in the repository.. And I need HTTPS to access it from Internet. If I can get Redmine to access it from svn:// I can just configure it to use HTTPS in place of HTTP, and I hope it all to works. I like VisualSVN because of its management tool, but I can use another Subversion distro if needed, as long as it supports svn:// and https://. I'm getting crazy on it because it should be simple but I can't get it to work.

    Read the article

  • Virtual Server HDD shrinks without apparent reason

    - by Christian
    We have a virtual hosted Linux server, and in the last few months every now and then the HDD shrinks from 400GB down to the exact byte count that is in use. All existing data can be downloaded and displayed without a problem, but we can't upload or edit any files because of the "full" hard drive. Here is a screenshot, where "size" should be 400GB: This has happened twice before, and again today. The last times, when I reported the issue to the host, they said "that isn't possible, you must be doing it wrong", but soon after the call, the problem vanished without us doing anything, so I suppose that they have some kind of problem they're not willing to admit. Even after the fact, they acted like nothing was wrong and wrote me a mail in which they explained that I can use "df -h" to view available disk space (well duh, how do you think I noticed this particular issue?). Questions about if and what they had done were ignored. It has happened around the 25th to 28th of the month, so I suspect that they might have a cronjob running every 30 days or so which wreaks havoc with some VM configs. I just want to understand the problem, but the host support hasn't been very helpful in that regard. I have tried Googling the issue, but any combination of search terms I can come up with just gives me tutorials on how to change HDD size in a virtual machine. a) What could be the cause of shrinking HDD size in a Ubuntu 12.04.3 LTS server? Could there be anything in our virtual machine or is it more likely to be an issue with the vm host? b) Can I do anything about it without needing to contact the host's support? c) Is there anyway I can prevent this from happening at all?

    Read the article

  • How to create a WHM/cPanel account, without creating a new sub-domain?

    - by Cyclops
    I have a basic VPS (full root access), with WHM/cPanel, and am learning the ropes. I'm trying to create a new account for an existing domain (mysite.com), and so far WHM won't let me - it either wants a sub-domain or fake domain, but won't allow two accounts for one domain. In the beginning, there was only the root account, and it wouldn't let me login to cPanel - a quick chat with tech support, and I am informed that I need to create a second account, which I did. So now I have an account, call it ns1me, for domain mysite.com. Now I want to create a django account. I go through the same process, but WHM won't allow me to use mysite.com as the domain for django. The docs recommend a sub-domain, so I fill the box in with django.mysite.com. I then realize that has actually created a sub-domain - going to django.mysite.com shows me its home directory, along with helpful information about what version of Apache, Python, and other mods its running (thanks, Apache). I really don't want a sub-domain, so that's out. Another chat with tech support, and they recommend a fake domain name, as it won't create anything. Sure enough, using a domain of djangomysite.com works, and WHM allows me to create a django account. But of course, I can't send email to [email protected] (where I could to [email protected]). What I want, is to be able to create a second account, associated with mysite.com (so I can run cPanel logged in as django, send email to [email protected], etc) - without creating a whole new sub-domain, or fake domain.

    Read the article

  • Nvidia GTX 660m crashes games

    - by dcap
    I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

    Read the article

  • Tunnell network requests with Windows 7

    - by mark
    I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

    Read the article

  • How to fix "The connection was restarted"?

    - by Altar
    I have a php script with ajax. Few days ago, without making any changes, the script stopped working. The script is working sometimes but it is very slow. Other times it doesn't load completely. Yet other times it loads and empty page or it shows a "The connection was restarted" message. We have tried loading the page from 4 different computers in two different countries (two different ISPs). There is nothing relevant in the server's log. We contacted iPage.com hosting support. We sent screenshots. And all we manage to get from them was an incomplete screenshot and the message 'We tested. The page loads'. So, they won't admit the fault. It looks like they loaded the page once and declared it is working and went back to playing solitaire. I know their support. We had all kind of problems with iPage hosting. My questions are: 1. There is any way to make this error more easy to reproduce? I mean instead of fixing the error to get it appear more often. 2. There is any way to test a server response, to see if it drops connections?

    Read the article

  • How to train users converting from PC to Mac/Apple at a small non profit?

    - by Everette Mills
    Background: I am part of a team that provides volunteer tech support to a local non profit. We are in the position to obtain a grant to update almost all of our computers (many of them 5 to 7 year old machines running XP), provide laptops for users that need them, etc. We are considering switching our users from PC (WinXP) to Macs. The technical aspects of switching will not be an issue for the team. We are in the process of planning data conversions, machine setup, server changes, etc regardless of whether we switch to Macs or much newer PCs. About 1/4 of the staff uses or has access to a Mac at home, these users already understand the basics of using the equipment. We have another set of (generally younger) users that are technically savvy and while slightly inconvenienced and slowed for a few days should be able to switch over quickly. Finally, several members of the staff are older and have many issues using there computers today. We think in the long run switching to Macs may provide a better user experience, fewer IT headaches, and more effective use of computers. The questions we have is what resources and training (webpages, Books, online training materials or online courses) do you recommend that we provide to users to enable the switchover to happen smoothly. Especially, with a focus on providing different levels of training and support to users with different skill levels. If you have done this in your own organization, what steps were successful, what areas were less successful?

    Read the article

  • Bing Desktop not updating the wallpaper anymore

    - by warmth
    For some reason, first my workstation and then my tablet stopped updating the wallpaper. First I thought it was my company that was avoiding the app to work properly but then I started noticing that the app itself is a mess: It has two storage and formats for the wallpapers: C:\Users\<username>\AppData\Local\Microsoft\BingDesktop\en-US\Apps\Wallpaper_5386c77076d04cf9a8b5d619b4cba48e\VersionIndependent\images with a #####.jpg (single number) image format & C:\Users\<username>\AppData\Local\Microsoft\BingDesktop\themes with a ####-##-##.jpg (date) image format. I read here that deleting the themes folder it will get remade with the new images, and it worked. However those are not the files used by the Wallpaper app and deleting the images folder won't get the same result. I have added Bing Desktop to the Firewall white list and the issue is still there. Any ideas? Currently I'm using DisplayFusion to place the wallpaper manually because the company doesn't allow change the wallpapers (policies). Note: I wrote to the DisplayFusion developers to suggest adding a feature to support Bing Wallpapers. They told me there was no API support to implement it but they will study this possibility (workaround) for the future: http://stackoverflow.com/questions/10639914/is-there-a-way-to-get-bings-photo-of-the-day

    Read the article

  • How do you get linux to honor setuid directories?

    - by Takigama
    Some time ago while in a conversation in IRC, one user in a channel I was in suggested someone setuid a directory in order for it to inherit the userid on files to solve a problem someone else was having. At the time I spoke up and said "linux doesn't support setuid directories". After that, the person giving the advice showed me a pastebin (http://codepad.org/4In62f13) of his system honouring the setuid permission set on a directory. Just to explain, when i say "linux doesnt support setuid directories" what I mean is that you can go "chmod u+s directory" and it will set the bit on the directory. However, linux (as i understood it) ignores this bit (on directories). Try as I might, I just cant quite replicate that pastebin. Someone suggested to me once that it might be possible to emulate the behaviour with selinux - and playing around with rules, its possible to force a uid on a file, but not from a setuid directory permission (that I can see). Reading around on the internet has been fairly uninformative - most places claim "no, setuid on directories does not work with linux" with the occasional "it can be done under specific circumstances" (such as this: http://arstechnica.com/etc/linux/2003/linux.ars-12032003.html) I dont remember who the original person was, but the original system was a debian 6 system, and the filesystem it was running was xfs mounted with "default,acl". I've tried replicating that, but no luck so far (tried so far with various versions of debian, ubuntu, fedora and centos) Can anyone clue me in on what or how you get a system to honor setuid on a directory?

    Read the article

  • Open source app to manage and run commands on cloud servers? [closed]

    - by Mark Theunissen
    I'm creating a SaaS platform, and I need a component / library that can create, delete and store the connection details for cloud servers. It also needs to support executing shell commands on these servers and returning the response to the caller. I want a central database of servers and their configuration, plus the ability to reach out and manage the servers via SSH execution of bash scripts. I don't want something that needs agents on every server like Chef. For example, this command is received by the hypothetical application: CREATE USER server = server12345 name = myuser It's translated into the following set of actions and executed by the app, which knows how to connect to server12345, and how to create a user on that server: $ ssh root@server12345 $ adduser myuser And returns the output from the shell: Added user myuser. I've done research on Google and can't quite quite find something that does this already. I've found: fabric This part handles the executing of the shell commands very elegantly, and can take multiple server definitions, but it's supposed to be a deployment tool so doesn't do everything that would be required above - for example, it doesn't have a daemon mode where it listens for commands - it expects to be executed on the shell. It also can't provide the central database functionality. libcloud This library can handle the server admin (CRUD) part, but doesn't have a command interface daemon either, and doesn't let you execute commands on the servers. I guess I need something that is a combination of libcloud, fabric and django for an API. Or something else that does that same thing regardless of language. Overmind Overmind is a GUI and wrapper around libcloud, but doesn't support the command execution part. What am I missing here?

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >