Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 244/262 | < Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >

  • Why is writing to my external hard drive slow, while benchmarks show fast writing?

    - by matix2267
    I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

    Read the article

  • Smart card driven membership and door entry system

    - by Rob G
    I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

    Read the article

  • No LAN and SMB access, and Explorer not responsive, when using a second connection

    - by Lorenzo
    I apologize if this is a duplicate question, I know that there are several questions about multiple connection (LAN + LAN and LAN + dialup) but I haven't been able to find one that fits my scenario. I'm still using Windows XP on my corporate laptop, and I'm connected to the corporate LAN via Ethernet. The LAN NIC has a public IP address, although not accessible externally, obtained via the corporate DNS server. This connection is firewalled and requires a proxy to access Internet. To access Internet sites blocked by the corporate firewall, I use my smartphone via USB tethering. It is seen as a new LAN interface, and I get a private IP address (class 192.168..). There are two problems: The LAN is not accessible, as the default gateway goes to the tethering NIC. I'd like to solve this, but I can live with it. My PC becomes unresponsive if I use Windows Explorer to view local files, or even when I open the start menu. I guess that this is caused by attemps to connect to a mapped network drive. But I disabled the "Client for Microsoft Networks" in the tethering NIC. Why the system still hangs? Of course if I disable the Ethernet NIC, Explorer stops hanging. If you need further details, add a comment. Thanks!

    Read the article

  • Copy all installed programs & files in a hard disk (which has 32 bit Windows 7) and clone/transfer it to another computer which has 64 bit Windows 7

    - by galacticninja
    I recently got a new PC which has a 64-bit Windows 7 installed. The current PC that I am using has a 32-bit Windows 7 installed. I would like to know if there is a software that can copy all my installed programs and files in the hard disk with the 32-bit Windows 7 PC and transfer it to the newer PC's hard disk which has a 64 bit version of Windows 7. This is essentially like "cloning" a hard disk but I would like to use a 64-bit OS in the target drive, instead of also using the 32-bit OS of the source drive. I would like to do this I can avoid reinstalling and reconfiguring my installed programs and files again on the new PC. If possible, I would like the new PC to work as it was in my previous PC, with the installed programs, configuration and files intact except that the OS is now 64-bit and the hard disk has a larger capacity. I have heard of programs that can clone a hard disk, but my concern is that the 32-bit Windows 7 OS will also be cloned to the new 64-bit PC. If it is not possible to transfer my installed programs and settings like the way I described, are there software that can make it easier to migrate my installed programs, their configurations and my files from a 32-bit Windows 7 PC to a 64-bit Windows 7 PC? Details: I have a SATA to USB connector/adapter to copy files in the current hard disk to the newer one. The two PCs are connected through LAN, so I can also transfer files through LAN. Both PCs only have one hard disk.

    Read the article

  • Alfa AWUSO36H 1W dysfunctional driver

    - by BrainStorm
    I recently purchased an Alfa AWUSO36H 1W wireless USB adapter for my notebook, in order to improve signal strength and quality. I'm currently using Linux Mint 11, and the it uses the RTL8187 driver for this adapter, I'm also using a 4dbi antenna, though I have others. The problem is that this adapter does exactly the opposite of what it should, actually my internal Broadcom BCM4313 adapter works way better than the alfa. Browsing is slow, some network applications don't even work, pings against Google.com on the internal adapter runs smooth, while in the alfa it gets like 25% packets lost or more! I'm less them 50 feet from my AP, the internal adapter gets 44/70 link quality, and the alfa gets around 60/70 (iwconfig output). Also the system always sets alfa power to 20dbm(100mw), then I have to do sudo iw set reg B0 to make it 30dbm(1000mw), but apparently no significant change. I've installed wireless-compat drivers, no change either. And worst of all, in Windows 7 it works way more smoothly for browsing, though I couldn't test it properly there. I hope its a driver problem, even if it's a pain to find/compile Linux drivers for a starter, I prefer it to a hardware problem where I would need to buy another adapter, since I have no money left (except for the cantenna pieces).

    Read the article

  • Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

    - by clem
    Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. Is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions?

    Read the article

  • why Thinkpad T410s intermittent keyboard death?

    - by patrickmdnet
    I have a Thinkpad T410s running Windows 7 64-bit. I have had it for three months. It has the latest BIOS (1.41) and trackpad drivers. In the last week I have started to notice that the keyboard intermittently stops working. Specifically, keystrokes have no effect, including Fn-F12 (shutdown) and Ctrl-Alt-Del. The LED on the capslock key does not turn on or off. Whatever state the lighted keys (e.g. mute) were in remains. The trackpad and trackpoint work properly, and I can close apps and properly shut down the machine. When I attach a USB keyboard it is recognized, but no keys work. If I run the Lenovo keyboard test, all the keys register properly and the caps lock light works again. When I quit the test app, the caps lock light stops working. If I hit Fn-F12 while the keyboard test is running, it goes into hibernation. When the machine comes back from hibernation, once I exit the keyboard test I again cannot do any input on the keyboard. I'm pretty convinced there is a software or driver problem. I never saw this the first three months I had the laptop. I do not recall installing anything recently. I am sure I've received some Windows security updates. I tried using wired networking instead of wireless - no difference. There doesn't appear to be any inciting event; it usually happens when I am working over ssh. I switched from rxvt+ssh to Putty and the problem still occurs. Any ideas?

    Read the article

  • CMD/ADB - Autorun script to search, copy, and paste a file from android system to flash drive

    - by Outride
    I've looked around and can't find anything that answers my question. This is my first question, so any tips or thoughts are welcome, as well as an answer :p As explained in title, i want to create a script that launches, finds a file on android phone, copies it, and pastes it to a flash drive. As of right now, it's a mix of multiple tutorials, trial and error, and I'm at a point of giving up. As of right now, I have a flash drive, loaded with three scripts. As follows: Bold = name of file file.bat @echo off :: variables /min SET odrive=%odrive:~0,2% set backupcmd=xcopy /s /c /d /e /h /i /r /y echo off %backupcmd% "C:\Users\Outride\Desktop\kikDatabase.db" "%drive%\all" @echo off cls invisible.vbs CreateObject("Wscript.Shell").Run """" & WScript.Arguments(0) & """", 0, False launch.bat wscript.exe \invisible.vbs file.bat So far, I had to use android commander, manually go through the directory, find /data/data/kik.android/databases and then copy kikDatabase.db to my desktop. Then run this scrip. Yes i'm trying to pull the database to copy all my email contacts. I use launch.bat, which then makes file.bat invisible due to the invisible.vbs script. What would i need to do now to have the file searched for and copied to the flashdrive? Thanks in advance, i'll be glad to answer any questions if theres any :p just remember that i'm not exactly a tech expert haha EDIT* Cleared junk of prior edits. New - I now have a .bat script to recognize what drive the usb is on, and launch py_cmd (adb shell) This is the current script. pull.bat @echo off :: variables SET odrive=%odrive:~0,2% set launching=start "%drive%\Minimal ADB and Fastboot\py_cmd" echo off %launching% so how could I make it for the .bat or a new script, to type the following "adb pull /data/data/kik.android/databases/ %drive%\All\Database" into the adb terminal? please help! I've been racking my brain over this all night :3

    Read the article

  • Windows 7 Install: No drives were found

    - by Albert Bori
    I was building a computer for my wife with an older SATA hard drive that I had lying around, and when attempting to do a new install of Windows 7 on it, the installer says: "No drives were found. Click Load Driver to provide a mass storage driver for installation." I ran the diskpart command: list volume, and it showed up as "Raw". So, I formatted it to NTFS and then it showed up as a healthy drive in diskpart. I also ran check disk on it with no errors. Windows 7 installer STILL can't find the drive. As far as BIOS settings, I have tried "Native IDE", AHCI, and Both AHCI/IDE mode (SATA slots 0-2 AHCI, 3-4 IDE). I tried all combinations... still "no drives were found". At this point, I'm just scratching my head. Using the installation dos window, I can see and talk to the drive just fine, but the installer just doesn't see it at all. I've even written folders and files to the drive, and it still "can't be seen". Any help would be great. Items of interest: Motherboard model: Gigabyte GA-A75M-UD2H - BIOS Version F5 (latest) Hard drive model: 80GB Seagate Barracuda 7200.7 ST380817AS (no other drives) Installing Windows 7 using a FAT32 formatted USB Drive, which I've used for other installs

    Read the article

  • Compressing and copying large files on Windows Server?

    - by Aaron
    I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

    Read the article

  • Fedora installed in Legacy mode, how to make it work in UEFI?

    - by TryntaLearn
    I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

    Read the article

  • BIOS not detecting working SATA hard drive

    - by user28927
    Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

    Read the article

  • Hard Drive Compatibility with Motherboard

    - by Wesley
    Here are the current specs to put things in context: ECS P4VXASD2+ V5.0 Intel Pentium 4 Northwood 2.8 GHz 2x 512MB PC2100 DDR266 SDRAM Maxtor DiamondMax 10 250 GB PATA (IDE) HDD Gigabyte 52x CD-ROM NVIDIA TNT2 Pro 16 MB OKIA 300W ATX PSU USB bracket Modem PCI Before, I actually had a 300 GB hard drive installed. However, I read the FAQ for the motherboard and discovered that a maximum of 250 GB hard drive was supported. So I ended up finding the one listed above and put that in. However, upon booting up, I reset the BIOS to defaults and auto-detected all the drives installed. The 250 GB came up as something like 251.0 GB. I didn't think much about it until I tried to boot up a Windows XP installation disc. It booted up successfully and run for about a minute before the computer randomly rebooted. I've made sure that all the jumpers and settings are correct and everything has been installed correctly. I've tried running it without the addons and one stick of RAM but still the same thing. What else could be causing this problem?

    Read the article

  • Synergy: Cannot send media keys from Linux to Mac

    - by CraftyThumber
    I have a Linux Synergy server (Si-Linux) serving just one Mac client (Macbook Pro UK) (SiBook-Pro.local). On my Linux server I am using a USB Apple keyboard with the exact layout of the laptops keyboard (the compact UK aluminium keyboard). I would like to send the media keys to the Mac client at all times and I have attempted the following in my synergy.conf: keystroke(AudioPlay) = keystroke(AudioPlay,SiBook-Pro.local) This did not seem to work so I ran both the server and client as foreground processes and with debugging enabled and observed the following: Server Log: DEBUG1: activate actions DEBUG1: hotkey: keyDown(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyDown id=57523 mask=0x0000 button=0x0000 DEBUG1: send key down to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 DEBUG1: deactivate actions DEBUG1: hotkey: keyUp(AudioPlay,SiBook-Pro.local) DEBUG1: onKeyUp id=57523 mask=0x0000 button=0x0000 DEBUG1: send key up to "SiBook-Pro.local" id=57523, mask=0x0000, button=0x0000 Client Log: DEBUG1: recv key down id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: mapKey e0b3 (57523) with mask 0000, start state: 0000 DEBUG1: key e0b3 is not on keyboard DEBUG1: recv key up id=0x0000e0b3, mask=0x0000, button=0x0000 DEBUG1: recv enter, 1279,386 5 2000 As you can see, the client claims the key received is not on keyboard. I don't understand since it is the same key as is on the Macbook's keyboard. I tried to reverse the client-server config to see if I could capture the key being sent if I pressed the Play button on the Macbook but the key doesn't seem to even make it to Synergy. Almost all keyboard presses get logged but the media keys seem to bypass the logs and just execute their function locally. E.g. I press play on the Macbook (with the Macbook as the server) and the key plays music on the Macbook and the key is not logged to the debug log.

    Read the article

  • Windows 7 ignores F6/F8 and will not boot

    - by P.Brian.Mackey
    I have a work PC with sophos safeguard encryption on it. Windows failed to start. When I bootup I receive an error saying a recent hardware or software change might be the cause. File: \Boot\BCD Status: 0xc0000098 Info: The windows boot configuration data file does not contain a valid OS entry. This began after the PC forced me to run a system recovery. My machine had powered down improperly (power outage?) and simply would not respond to my keyboard input to cancel the option to scan my system. After the scan "repaired" a boot file, my system crashed. Now it tells me I can insert my windows 7 disk and run recovery. I can't simply do this because of Safeguard. The system recovery can't see my encrypted drive. I tried hitting F2 to manually login to Safeguard and then selected the option to boot from media. The computer prompts me to hit any key to boot from disk...which I do, but once again it is not reading my keyboard input. I can't get F8/F6 to bypass startup files and get me to a command prompt like the old days. If I could get to a command prompt I might could recover the file windows jacked up from its backup location...though I may need to use the windows recovery disk UI to do this..??? In the past I've been able to slap in a PS/2 keyboard when the USB keyboards stop responding like this. I have no PS/2 keyboard available. Anyone have any idea how I can undo the damage windows system recovery has done with safeguard installed?

    Read the article

  • How to restart boot Windows 7 after upgrading to a SSHD on SONY VAIO with recovery discs?

    - by Boris Okun
    The original HDD on my Sony VAIO still works, but has a damaged sector 0 and I was constantly prompted to replace the HDD because of the imminent failure. I created recovery discs as instructed, used a USB external HDD for complete back up (including Windows image back up). After installing the SSHD and using recovery discs to upload Windows and boot, I am getting the Windows welcome screen. Right after that, I'm getting the following message: Windows couldn't complete the installation. To install Windows on this computer, restart the installation. I have tried repeating the process many times all kinds of different ways and I still receive the same message. Also, when I tried to change to partitioning as the other option offered, I get the message: Windows Setup could not configure Windows to run on this computer's hardware. All troubleshooting for hardware and PCU came out solid. I tried to load the image back up from the external drive, but can't load the driver. The computer doesn't see it. Does anyone have a clue or has encountered something similar?

    Read the article

  • How to minimize the risk of employees spreading critical information?

    - by Industrial
    Hi everyone, What's common sense when it comes to minimising the risk of employees spreading critical information to rivalling companies? As of today, it's clear that not even the US government and military can be sure that their data stays safely within their doors. Thereby I understand that my question probably instead should be written as "What is common sense to make it harder for employees to spread business critical information?" If anyone would want to spread information, they will find a way. That's the way life work and always has. If we make the scenario a bit more realistic by narrowing our workforce by assuming we only have regular John Does onboard and not Linux-loving sysadmins , what should be good precautions to at least make it harder for the employees to send business-critical information to the competition? As far as I can tell, there's a few obvious solutions that clearly has both pros and cons: Block services such as Dropbox and similar, preventing anyone to send gigabytes of data through the wire. Ensure that only files below a set size can be sent as email (?) Setup VLANs between departments to make it harder for kleptomaniacs and curious people to snoop around. Plug all removable media units - CD/DVD, Floppy drives and USB Make sure that no configurations to hardware can be made (?) Monitor network traffic for non-linear events (how?) What is realistic to do in a real world? How does big companies handle this? Sure, we can take the former employer to court and sue, but by then the damage has already been caused... Thanks a lot

    Read the article

  • Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

    - by gts123
    I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

    Read the article

  • Dialog box tells me there's a missing driver when installing 64-bit version of Windows 7

    - by Eikern
    I'm trying to install Windows 7 64-bit on my computer (ASUS P6T Deluxe V2, one 80GB HDD and two 1 TB HDDs). When I'm supposed to select whether I want to Upgrade or do a Custom install, I get a dialog box telling me: Load Driver A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step. I've tried to reach this step using a 32-bit installation disc, but that doesn't generate this message at all. Through the command windows (shift-F10) I can reach all of my drives, including my optical drive, without any problems--so what kind of device driver is it the installation wants? I've tried all the obvious drivers on the CD that followed my motherboard, but I can't seem to find the right one. The problem is that I don't know what device I'm supposed to load the drivers for in the first place. Can anyone help me? Edit: It turned out that my downloaded image was corrupted. I borrowed a DVD from a friend of mine, which worked!

    Read the article

  • Extending a home wireless network using two routers running tomato

    - by jalperin
    I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

    Read the article

  • Disable or remove filter driver for single HID device

    - by snoopen
    Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

    Read the article

  • keyboard intermittently stops working, even after reinstalling windows 7; possibly a Chrome issue?

    - by neverskipbreakfast
    My keyboard intermittently stops working. Sometimes a couple of keys will work, but usually none. Sometimes if I mash a couple of the ctrl+alt+windows type keys randomly for a bit, the keyboard will let me type one more letter before stopping again. Sometimes the keys will open a program menu, but usually not. I have even completely wiped my machine and reinstalled windows 7; the problem continues. Specs: Intel iMac (early 2006, 2.0GHz, 2MB RAM, 240GB HD) running ONLY Windows 7 Professional, 32-bit (NOT through boot camp) and using a USB keyboard (Saitek Eclipse II.) *Unplugging & reconnecting keyboard does NOT fix it. *Connecting a different keyboard does NOT fix it. That one won't work, either. *Drivers are up-to-date. Removing and reinstalling drivers does NOT fix it. *Restarting the computer does NOT fix it. In fact, when the Windows logon screen appears, they keyboard won't work, and neither will the icon to pull up the on-screen keyboard. Otherwise my mouse can click around just fine. I can only log onto a non-password protected account. *Generally, logging into as different Windows user fixes it. I can then log back on to my main user account and continue work for a few hours until it happens again. *Clearing my Chrome browsing data stopped the problem from recurring for a week or so. *I use Avira free antivirus software, and repeated scans turn up nothing fishy. *I have already REINSTALLED Windows 7 (not just a restore.) The problem returned after 2 days of use. The only thing I suspect is something in Google Chrome -- I used my google account to reload all my previous Chrome extensions, saved data, etc. (Chrome Extensions Installed: AdBlock, Better Google Tasks, DropBox, FB Photo Zoom, Google Mail Checker, StayFocusd.) Any ideas? Any at all?

    Read the article

  • Recover badly recorded DVDs

    - by CesarGon
    A few years ago (2003-2005) I bought a Sony USB external DVD recorder for my Dell laptop and I used it to burn a lot of discs. Much later, when I tried to use one of these discs, I realised that I could not read it. The disc behaved as if it was scratched or dirty. I tried on a couple of different DVD drives but got the same effect. Sadly, all the discs that I burnt with that recorder suffer from the same problem. Edit. When I read one of these discs with ImgBurn, I get lots of unrecovered read errors in multiple sectors, even at 1x speed. The sectors that cause read errors seem to be quite random; it's not always the same one. I have no idea what could be wrong with the discs. I doubt that they are scratched or dirty; it would be too much of a coincidence that all the discs that I burnt with that recorder got damaged at the same time. Also, they don't show any physical defects. Is there any way to diagnose what the problem is and, hopefully, recover the contents of the discs? Many thanks.

    Read the article

  • Automatic o/s reset on a dedicated internet browsing Windows 7 pc.

    - by camelCase
    I have just purchased a new Acer Revo nettop PC for dedicated internet browsing. It will be the only pc on a home network. My original plan was to install one virtual PC for family browsing, another for remote web based server administration and ban browser use from the host Windows 7 o/s. The idea was that I could recover to a fresh VHD image once a week to eliminate any build up of malware inside the browser VMs. However now I am looking for alternative solutions since the Intel Atom cpu does not have hardware VT support which Windows Virtual PC requires. Would it be possible to engineer some type of routine overnight host o/s wipe and recovery? I guess cyber cafes do something like this? The only user data that would need to be retained across a recovery would be browser bookmarks but these could be exported to remote service. Edit 1: I am thinking the o/s reset could be done via some disk image recovery process. Edit 2: Just had a brainwave. Routine browsing could be done via the new Google Chrome O/S. I have just seen a video of the Google Chrome o/s booting off a usb pen drive in seconds.

    Read the article

  • mouse pointer moving on its own

    - by PA
    After two months of working correctly, I am experiencing an strange and very annoying problem. My mouse pointer is moving on its own. If I move the mouse to the left, as soon as I stop the movement, the pointer runs again to the far right. This makes the mouse totally unusable. The mouse device is an optical USB mouse. It is not a problem with the mouse itself. I have tried with another mouse, same problem. (both mice are OK, I have tried both mice on my laptop, both worked perfectly) Have tried different surfaces, too. Same problem. System is Windows XP Pro SP3. Computer is a desktop PC two months old. I suspected it could be a problem with the mouse driver. But both mice are from different brand, so I suppose they use different drivers. What else can I try? any suggestion?

    Read the article

< Previous Page | 240 241 242 243 244 245 246 247 248 249 250 251  | Next Page >