Search Results

Search found 12169 results on 487 pages for 'ben none'.

Page 246/487 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• VirtualBox error with Ubuntu virtual machine

  - by user2985363

  I am trying to work on a coding project and cannot open my Ubuntu virtual machine with Oracle VM VirtualBox. I took a snapshot yesterday at about 11, and it was working fine. Several times I closed and reopened it. Today when I tried to open it, I kept getting the error below. Failed to open a session for the virtual machine Ubuntu 12.04 32-bit. VM cannot start because the saved state file 'C:\Users\Tyler\VirtualBox VMs\Ubuntu 12.04 32-bit\Snapshots\2014-01-30T19-59-05-976647800Z.sav' is invalid (VERR_FILE_NOT_FOUND). Deleted the saved state prior to starting the VM. I tried deleting the file as it said, but none of the snapshots would open still. The file is still in my recycling bin. What can I do? Also, I took the 1/31 snapshot today before I deleted the previous one.

  Read the article

• Can't get ZSH working on CentOS

  - by waveslider

  I've been using zsh for a couple of years now on Ubuntu and really like it a lot. I've installed it on our production server as well, which is running CentOS 5.2 However, I just installed it via yum on a new VM I created to use as a development box, to replicate our production box as closely as possible. Although yum shows that it is definitely installed (/bin/zsh) and that it is set as my shell, it does not appear to be working. Instead of creating the .zshrc and .profile files in my home directory, it created a .tcshrc file. Also, I did not receive the default configuration menu that is always displayed once you begin using ZSH, and none of the features (like advanced tab comple

  Read the article

• Restore Picasa people tags

  - by Paul

  I have loaded Windows 7 to my laptop. Before doing this I backed up all my pictures using the Picasa backup utility. I then ran a restore on the clean Windows 7 install. I then installed Picasa 3.5 and none of the people tags showed up. I then went and deleted what I thought was the Picasa DB and then tried running the restore again. Now each folder shows up twice in Picasa but only once under the Windows Pictures folder. How do I get rid of the duplicates in Picasa and get my people tags back?

  Read the article

• In Ubuntu I make changes to php.ini but nothing happens

  - by MrAn3

  Hi, Apache with php works well, but none of the changes I make in php.ini have effect, I've even delete all the contents of the file, then restart Apache, and run phpinfo() and surprisingly everything continues working well. The file I'm editing is the one that appears in the phpinfo() like "Loaded Configuration File". (/etc/php5/apache2/php.ini) P.S. I'm running Ubuntu 9.04 and PHP 5.2 Thanks in advance. More Details: I'm restarting with sudo /etc/init.d/apache2 restart, I've also tried sudo /etc/init.d/apache2 stop, and then start, at restarting I get: Restarting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName ... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [ OK ] "which php" did not produce any results. My installation of PHP was done using Synaptic Package Manger, choosing "Mark Packages by task" and then LAMP server. I don't have any clue of what to do...

  Read the article

• 8 Character Device names

  - by Lee Harrison

  Is there any reason to still use only 8 characters in a device name? My boss still uses this rule for printers, computers, routers, servers... basicly any device connected to our network. This leads to massive confusion among users, especially when it comes to printer. It also leads to confusion from an administration standpoint because every device is named vaguely, and similarly(its only 8 characters!). I understand the history behind this and compatibility with older systems, but none of our legacy systems will ever make use of PS-printers and Wifi networks. Is there any reason to still do this, and what is everyone else doing when it comes to naming network devices at an enterprise level?

  Read the article

• Create timestamp formula for Excel

  - by flpgdt

  The idea is simple, I'd like a function I could do something like =MOD_DATE_OF(A1:A4) and when any of the cells in such range is modified, the cell I assigned that formula gets the current date. I have found some similar questions on the web and even here, but none of them quite it. The closest I've got was this code somewhere (sorry, lost track of the source): Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Target.Column = 1 Then Target.Offset(0, 1).Value = Date End If End Sub But it is still not a function.. I am using Excel from Office 2010 thanks

  Read the article

• Dns works, can ping, but cannot load web pages in browser

  - by user1224595

  Yesterday I changed routers, and my desktop computer started acting up. I could ping websites, and nslookup was able to resolve names to addresses, but neither chrome, firefox, nor ie could load any webpages. None of my other computers connected to the same wireless router have any problems. I connect my desktop to the router through a cheap wifi dongle. I did a wireshark capture of the browser request, and I have uploaded the pcap here. https://drive.google.com/file/d/0B7AsPdhWc-SwbTV0bUJLQXo4UUE/edit?usp=sharing One strange thing I noticed was the spamming of ssdp packets. I am not super familiar with networking, but it seems that it is not a problem with the router, as dns works, and so does dhcp (the desktop is assigned an address correctly). Any help would be appreciated.

  Read the article

• Can I restore Windows 8/install Windows 7 from BIOS?

  - by Tom

  I recently got an ASUS K55A series laptop with Windows 8 on it, and have been trying to load Windows 7 on it for days to no avail, and recently I discovered how to get my Windows 7 install DVD to boot from the BIOS, but I deleted all of my Windows 8 system information from both partitions of my HDD and Windows 7 setup says it cannot install on the disc because of a partition format issue. I did not delete the recovery HDD partition for Windows 8, but I can't get the HDD to show up in my boot menu in BIOS, and none of the F keys work to get to recovery mode (only DEL and F2 work to get me into BIOS)

  Read the article

• Windows Vista Backups?

  - by skaz

  I am trying to configure a Windows Backup on Vista but don't see some capabilities I would expect to be there. For one, it looks like I can only select a Local Drive or a network share. I want to use a local drive, but I want to use a sub folder of one of the drives. Must I really pick the root? As a work-around, I made a network share to the local drive, thinking I could then pick network share. However, when I do this, I am prompted for credentials to hit the share, and none work. However, the share works Explorer, and it works from other computers, so the access is configured correctly. Is there any way to do what I am trying to do? Thanks.

  Read the article

• Postfix not delivering mails

  - by Sotocan

  I have problems with a recently configured postfix MTA. When postfix starts the following warning appears: "postfix/qmgr[5078]: warning: connect to transport private/filter: No such file or directory" I have amavis-new as a content-filter, but even if I comment-out the relevant line, the warning appears. As a result (I think), of the above, I get errors like below, for every virtual domain that I have: "postfix/error[5080]: 254851834107: to=, relay=none, delay=13082, delays=13082/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)" The good news for me, is that somehow I managed to fix that (don't ask me how!!!!) The problem is that now I have 50 or so mails, that were affected by the aforementioned problem, in the mail-queue... If I "postqueue -f " I get the same style of error as before (mail transport unavailable)...however new mails are delivered to their final destination properly... Any suggestions? Kind regards. P.S. Local mail delivery from/to Unix and virtual users, was OK write from the beginning!

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• mpstat on slackware 13.0 shows no utilization

  - by conartist6

  As the title says, the mpstat command, executed on Slack 13.0 continuously shows almost no processor utilization of any sort. In fact none of the output ever seems to change at all. The system is dual processor board with two hyperthreaded P4 Xeons. Any ideas? 08:50:06 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s 08:50:06 PM all 0.38 0.00 0.03 0.03 0.00 0.00 0.00 99.56 1510.46 08:50:06 PM 0 0.50 0.00 0.05 0.10 0.00 0.01 0.00 99.33 11.90 08:50:06 PM 1 0.32 0.00 0.03 0.01 0.00 0.00 0.00 99.64 0.00 08:50:06 PM 2 0.38 0.00 0.03 0.01 0.00 0.00 0.00 99.58 0.00 08:50:06 PM 3 0.29 0.00 0.02 0.00 0.00 0.00 0.00 99.68 0.00 This is, literally, the only output I can get from the program. No values change ever.

  Read the article

• OS X: How to create a user account with access to the applications that she has installed only.

  - by pmurillo

  Till now, I've been the sole and proud owner of an iMac. I've always logged in as an administrator and I've also installed a bunch of software following the standard procedure of dragging and dropping it into the Applications folder. This is about to change, as sharing it with a friend makes a lot of sense now that I only have time to use the computer in the mornings, and she can only use it at nights. I thought this was going to be really easy: Just create a user account for her and that's all, I thought. Unfortunately, this is not the case. When she logins into the computer using her username and password, she has access to the same applications I've installed. Even the same applications that I setup to automatically start when I login start for her when she does. How can I setup a user that has only access to the applications that she has installed, but none of the ones installed by other users? Many thanks

  Read the article

• Export Import error 'SSIS Data Flow Task could not be created' ... registering DTSPipeline.dll, cannot create task "STOCK:PipelineTask"

  - by Moin Zaman

  I'm about to throw in the towel on this one. Running SQL Server 2008 enterprise on Windows 7 x64. Can't get past this issue. When I try to Import / Export Data from databases through SQL Server Management Studio I get the following Error. Error: TITLE: SQL Server Import and Export Wizard ------------------------------ The SSIS Data Flow Task could not be created. Verify that DTSPipeline.dll is available and registered. The wizard cannot continue and it will terminate. ------------------------------ ADDITIONAL INFORMATION: Cannot create a task with the name "STOCK:PipelineTask". Verify that the name is correct. ({0194F10C-9860-4A4F-AF8B-DE7EFD89859F}) I have tried many solutions found via Google, but none of them have worked. A side issue that may be related is when I try to create an Integration Services Project in Business Intelligence Studio I get a 'project creation failed' error.

  Read the article

• Creating a seperate static content site for IIS7 and MVC

  - by JK01

  With reference to this serverfault blog post: A Few Speed Improvements where it talks about how static content for stackexchange is served from a separate cookieless domain... How would someone go about doing this on IIS7.5 for a ASP.NET MVC site? The plan so far: Register domain eg static.com, create a new website in IIS Manually copy the js / css / images folders from MVC as is so that they have the same paths on the new server Enable IIS gzip settings (js/css = high compression, images = none) Set caching with far future expiry dates <clientCache cacheControlCustom="public" /> in the web.config Never set any cookies on the static.com site Combine and minimize js / css Auto deploy changes in static content with WebDeploy Is this plan correct? And how can you use WebDeploy to deploy the whole web app to one server and then only the static items to another? I can see there is a similar question, but for apache: Creating a cookie-free domain to serve static content so it doesn't apply

  Read the article

• Bootmgr is missing for windows xp

  - by user1167074

  I know that there are so many posts on this subject but none of them worked for me. I have Ubuntu on my machine and I would like to install windows xp. As my cd/dvd reader does not work, I made a bootable usb from iso image using UNETBOOTIN, but when I try to boot in through USB it says "BOOTMGR is Missing". I have searched a lot but could not find any solution to it. Please note that my hard disk uses ext4 format and my bootable drive uses NTFS. I have set the Boot Sequence as USB Drive in BIOS. Please let me know if you need any additional information to fix this. Thanks

  Read the article

• block access to certain website types

  - by frustrated teacher

  Need to block access to certain website types without listing each URL to block. Students at secondary school are going to porn sites. Need to be able to block all such access without having to list each possible site URL. Having the Content -- Ratings tab set to None for all categories on the ratings files listed on my computers does not prevent access. Unchecking users may access sites with no rating, even with the security settings set to High, still allows the porn sites to come up. If that is checked, then ONLY listed sites can open and students would not be able to do any research via google, for example. I would rather not have to continue checking each computer and blocking sites as they find them.

  Read the article

• Is there a Linux kernel boot parameter to configure an IPv6 address?

  - by aef

  I know there is a parameter named ip which lets you configure IPv4 addresses on the Linux kernel through the boot loader. That looks like the following: ip=192.0.2.1::192.0.2.62:255.255.255.192::eth0:none I'm looking for an equal parameter for IPv6 configuration. I couldn't find anything about this in the kernel documentations. Update: Because of a lot of you asked why I would need this: The idea to use a kernel configuration came up related to this problem. I suspect the regular boot-up interface configuration is not done, because the interfaces are already up. The reason for this could be that I'm using a pre-boot environment with a Dropbear SSH server to allow me to unlock my encrypted root partition. The IP addresses for this environment are configured through GRUB with the ip= parameter. There is no DHCP or Router Advertisement available on that Ethernet segment and as this is the uplink segment provided by a large hosting company, there is no way to change that fact.

  Read the article

• Windows Vista to Windows7 upgrade

  - by Kalls

  I have a Windows Vista Home Premium and I tried installing SP2 on it and It prompted me to install SP1. Then it stopped working when I installed SP1. I don't have back up that I can use to restore it. When I use the Windows Repair mode I am unable to get access to few options none of which is working. I do have access to the command prompt. Is there way to restore this? If I am planning to upgrade to Windows 7 Home Premium what are the steps?

  Read the article

• Recover data from OST file

  - by Daniel Hilgarth

  I need to recover some mails from a backed up OST file. Unfortunately, I deleted the corresponding IMAP mail account from Outlook. When I recreate the mail account and replace the created OST file with my backup I get the following error message: The file {path}.ost cannot be accessed because it has been configured for use with a different mailbox. How to solve this problem? Please don't suggest a OST to PST tool unless you know it works. I tried numerous of those tools from dubious looking websites and none worked. Please note: I am using Outlook 2013 Preview.

  Read the article

• Windows 7 doesn't connect to mapped drives at start up.....

  - by danbo

  We are testing Windows 7 (32bit version) and logon to a windows 2003 domain that runs a logon script whichs maps our drive letters. We have no control over the domain. Of our 7 test users, 5 continually recieve red X's on their network drives after they logon. Double clicking on them connects the drives, however, any aplpication that requires files on the fileserver will fail since it thinks it has no connection to the drive. We have tried several reg edits (Enable Linked connections, KeepConn), we have tried to find information in the event viewer to no avail. We have also looked at any differences in NIC driver versions (none). The other 2 computers that can connect without problem are local admins, but, if we logon to the 5 that have the problem with the local admin credentials we get the red x's as well??? This one is a real head scratcher......

  Read the article

• NFS of NAS server blocks in cluster environment

  - by Zardoz

  In our department we have an Iomega NAS (px4-300d) connected to a Supermicro cluster with 5 nodes (12 cores per node). Each node mounts a share on that NAS by using NFS. Unfortunately after some time (several minutes) of permanent read/write operations (from all nodes) the NAS starts to block and a bit later freezes completely. We tried several options of the mount command, but nothing helped (async, intr, wsize, rsize). The NAS itself doesn't allow many options (better to say none). Do you have any recommendation how to integrate a NAS using NFS in a cluster environment?

  Read the article

• Photoshop changes colors when moved to a different monitor

  - by Jason

  This Yahoo! answers question pretty much sums up my predicament. Unfortunately I haven't really found an actual answer. Here's a screen shot of what happens when I place Photoshop between my monitors. Imagine that the left side of my laptop is the right square and the yellow is the right side of my monitor. When I move the program to one side fully or the other, it takes on the corresponding color. Obviously the color on the right is correct and Photoshop is changing the color of the image when it moves to my external monitor. Also notice how none of the tools or anything are different colors, just the actual image itself. How do I fix this? EDIT You may also notice that the color palette in the left corner is showing that yellow tinge. I didn't actually pick that yellow color, it's supposed to be showing the grey on the left that I used to fill in the square.

  Read the article

• Cannot umount device is busy

  - by user132199

  Situation I am running a RHEL server via a VM on my laptop. I have a win7 desktop sharing out a folder and the VM on my laptop running RHEL6 has a CIFS windows mount at \mnt\win When I go to unmount the device I get a device is busy message. So I went to my laptop and check to see if there were any users connected to the share, since it listed none I turned off sharing. I went back to my RHEL instance and attempted another umount \mnt\win but received the same error. Question What are other alternatives to unmounting a shared drive?

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >