Search Results

Search found 39511 results on 1581 pages for 'exc bad access'.

Page 246/1581 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• Cisco PIX firewall blocking inbound Exchange email

  - by sumsaricum

  [Cisco PIX, SBS2003] I can telnet server port 25 from inside but not outside, hence all inbound email is blocked. (as an aside, inbox on iPhones do not list/update emails, but calendar works a charm) I'm inexperienced in Cisco PIX and looking for some assistance before mails start bouncing :/ interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 192.168.1.10 SERVER access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.1.96 255.255.255.240 access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.96 255.255.255.240 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq 3389 access-list outside_acl permit tcp any interface outside eq ftp access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq https access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq www access-list outside_acl permit tcp any interface outside eq 993 access-list outside_acl permit tcp any interface outside eq imap4 access-list outside_acl permit tcp any interface outside eq 465 access-list outside_acl permit tcp any host 213.xxx.xxx.xxx eq smtp access-list outside_cryptomap_dyn_40 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANYVPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list COMPANY_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_60 permit ip any 192.168.1.96 255.255.255.240 access-list COMPANY_VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any access-list outside_cryptomap_dyn_80 permit ip any 192.168.1.96 255.255.255.240 pager lines 24 icmp permit host 217.157.xxx.xxx outside mtu outside 1500 mtu inside 1500 ip address outside 213.xxx.xxx.xxx 255.255.255.128 ip address inside 192.168.1.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool VPN 192.168.1.100-192.168.1.110 pdm location 0.0.0.0 255.255.255.128 outside pdm location 0.0.0.0 255.255.255.0 inside pdm location 217.yyy.yyy.yyy 255.255.255.255 outside pdm location SERVER 255.255.255.255 inside pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_outbound_nat0_acl nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx 3389 SERVER 3389 netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx smtp SERVER smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx https SERVER https netmask 255.255.255.255 0 0 static (inside,outside) tcp 213.xxx.xxx.xxx www SERVER www netmask 255.255.255.255 0 0 static (inside,outside) tcp interface imap4 SERVER imap4 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 993 SERVER 993 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface 465 SERVER 465 netmask 255.255.255.255 0 0 static (inside,outside) tcp interface ftp SERVER ftp netmask 255.255.255.255 0 0 access-group outside_acl in interface outside route outside 0.0.0.0 0.0.0.0 213.zzz.zzz.zzz timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout sip-disconnect 0:02:00 sip-invite 0:03:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ max-failed-attempts 3 aaa-server TACACS+ deadtime 10 aaa-server RADIUS protocol radius aaa-server RADIUS max-failed-attempts 3 aaa-server RADIUS deadtime 10 aaa-server RADIUS (inside) host SERVER *** timeout 10 aaa-server LOCAL protocol local http server enable http 217.yyy.yyy.yyy 255.255.255.255 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server community public no snmp-server enable traps floodguard enable sysopt connection permit-ipsec crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 40 match address outside_cryptomap_dyn_40 crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 60 match address outside_cryptomap_dyn_60 crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-MD5 crypto dynamic-map outside_dyn_map 80 match address outside_cryptomap_dyn_80 crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map client authentication RADIUS LOCAL crypto map outside_map interface outside isakmp enable outside isakmp policy 20 authentication pre-share isakmp policy 20 encryption 3des isakmp policy 20 hash md5 isakmp policy 20 group 2 isakmp policy 20 lifetime 86400 telnet 217.yyy.yyy.yyy 255.255.255.255 outside telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 217.yyy.yyy.yyy 255.255.255.255 outside ssh 0.0.0.0 255.255.255.0 inside ssh timeout 5 management-access inside console timeout 0 dhcpd address 192.168.1.20-192.168.1.40 inside dhcpd dns SERVER 195.184.xxx.xxx dhcpd wins SERVER dhcpd lease 3600 dhcpd ping_timeout 750 dhcpd auto_config outside dhcpd enable inside : end I have Kiwi SysLog running but could use some pointers in that regard to narrow down the torrent of log messages, if that helps?!

  Read the article

• Formatting a former RAID 0 drive through USB

  - by EXC

  I'll try to be as specific as possible here: I was using two Hitachi 2.5" 500 gb HDDs in my Gateway P-7805u laptop in a RAID 0 configuration. The array was causing the laptop to run extremely hot, however, so I removed them and deleted the RAID array through Intel Matrix HDD manager. I did a clean install of Windows 7 on the original 320 gb HDD that came with the laptop. I never did format the original RAID array HDDs before taking them out of the computer. Now, I am attempting to format the Hitachi 500 gb RAID array HDDs externally through a USB external enclosure. The external HDD drivers install on my clean install OS, but when I go into 'My Computer' there is no external drive available. I cannot format in CMD Prompt because my computer will not designate a drive letter to the external HDD. The drivers install and the HDD is recognized as a Hitachi external drive, but nothing seems to show up in my computer window. I need to know if there is a way to format these drives to NTFS externally.

  Read the article

• how to access mysql table from wamp database using this php code? [migrated]

  - by user3909877

  how to access tables from database by using php in wamp server.i have done the following code but its not working for some reason.is there anything to put in 'action=""'.it is not giving any error but displaying the same page.i want to display table from database on any different entry in dropdown menu and pressing search button.. <p class="h2">Quick Search</p> <div class="sb2_opts"> <p> </p> <form method="post" action="" > <p>Enter your source and destination.</p> <p> From:</p> <select name="from"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <p> To:</p> <select name="To"> <option value="Islamabad">Islamabad</option> <option value="Lahore">Lahore</option> <option value="murree">Murree</option> <option value="Muzaffarabad">Muzaffarabad</option> </select> <input type="submit" value="search" /> </form> </form> </table> <?php if(isset($_POST['from']) and isset($_POST['To'])) { $from = $_POST['from'] ; $to = $_POST['To'] ; $table = array($from, $to); $con=mysqli_connect("localhost"); $mydb=mysql_select_db("homedb"); if (mysqli_connect_errno()) { echo "Failed to connect to MySQL: " . mysqli_connect_error(); } switch ($table) { case array ("Islamabad", "Lahore") : $result = mysqli_query($con,"SELECT * FROM flights"); echo "</flights>"; //table name is flights break; case array ("Islamabad", "Murree") : $result = mysqli_query($con,"SELECT * FROM `isb to murree`"); echo "</`isb to murree`>"; //table name isb to murree ; break; case array ("Islamabad", "Muzaffarabad") : $result = mysqli_query($con,"SELECT * FROM `isb to muzz`"); echo "</`isb to muzz`>"; break; //..... //...... default: echo "Your choice is nor valid !!"; } } mysqli_close($con); ?>

  Read the article

• Remote Desktop to Your Azure Virtual Machine

  - by Shaun

  The Windows Azure Team had just published their new development portal this week and the SDK 1.3. Within this new release there are a lot of cool feature available. The one I’m looking forward to is Remote Desktop Access to your running Windows Azure Virtual Machine.   Configuration Remote Desktop Access It would be very simple to make the azure service enable the remote desktop access. First of all let’s create a new windows azure project from the Visual Studio. In this example I just created a normal MVC 2 web role without any modifications. Then we right-click the azure project node in the solution explorer window and select “Publish”. Then let’s select the “Deploy your Windows Azure project to Windows Azure” on the top radio button. And then select the credential, deployment service/slot, storage and label as susal. You must have the Management API Certificates uploaded to your Windows Azure account, and install the certification on you machine before in order to use this one-click deployment feature. If you are familiar with this dialog you will notice that there’s a linkage named “Configure Remote Desktop connections”. Here is where you need to make this service enable the remote desktop feature. After clicked this link we will set the configuration of the remote desktop access authorization information. There are 4 steps we need to do to configure our access. Certificates: We need either create or select a certificate file in order to encypt the access cerdenticals. In this example I will use the certificate file for my Management API. Username: The remote desktop user name to access the virtual machine. Password: The password for the access. Expiration: The access cerdentals would be expired after 1 month by default but we can amend here. After that we clicked the OK button to back to the publish dialog.   The next step is to back to the new windows azure portal and navigate to the hosted services list. I created a new hosted service and upload the certificate file onto this service. The user name and password access to the azure machine must be encrypted from the local machine, and then send to the windows azure platform, then decrypted on the azure side by the same file. This is why we need to upload the certificate file onto azure. We navigated to the “Hosted Services, Storage Accounts & CDN"” from the left panel and created a new hosted service named “SDK13” and selected the “Certificates” node. Then we clicked the “Add Certificates” button. Then we select the local certificate file and the password to install it into this azure service.   The final step would be back to our Visual Studio and in the pulish dialog just click the OK button. The Visual Studio will upload our package and the configuration into our service with the remote desktop settings.   Remote Desktop Access to Azure Virtual Machine All things had been done, let’s have a look back on the Windows Azure Development Portal. If I selected the web role that I had just published we can see on the toolbar there’s a section named “Remote Access”. In this section the Enable checkbox had been checked which means this role has the Remote Desktop Access feature enabled. If we want to modify the access cerdentals we can simply click the Configure button. Then we can update the user name, password, certificates and the expiration date.   Let’s select the instance node under the web role. In this case I just created one instance for demo. We can see that when we selected the instance node, the Connect button turned enabled. After clicked this button there will be a RDP file downloaded. This is a Remote Desctop configuration file that we can use to access to our azure virtual machine. Let’s download it to our local machine and execute. We input the user name and password we specified when we published our application to azure and then click OK. There might be some certificates warning dislog appeared. This is because the certificates we use to encryption is not signed by a trusted provider. Just select OK in these cases as we know the certificate is safty to us. Finally, the virtual machine of Windows Azure appeared.   A Quick Look into the Azure Virtual Machine Let’s just have a very quick look into our virtual machine. There are 3 disks available for us: C, D and E. Disk C: Store the local resource, diagnosis information, etc. Disk D: System disk which contains the OS, IIS, .NET Frameworks, etc. Disk E: Sotre our application code. The IIS which hosting our webiste on Azure. The IP configuration of the azure virtual machine.   Summary In this post I covered one of the new feature of the Azure SDK 1.3 – Remote Desktop Access. We can set the access per service and all of the instances of this service could be accessed through the remote desktop tool. With this feature we can deep into the virtual machines of our instances to see the inner information such as the system event, IIS log, system information, etc. But we should pay attention to modify the system settings. 2 reasons from what I know for now: 1. If we have more than one instances against our service we should ensure that all system settings we modifed are applied to all instances/virtual machines. Otherwise, as the machines are under the azure load balance proxy our application process may doesn’t work due to the defferent settings between the instances. 2. When the virtual machine encounted some problem and need to be translated to another physical machine all settings we made would be disappeared.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Why can I not access the internet when Windows 7 finds no issue with the ethernet connection and the network can see my device?

  - by WannabeCoder

  So I just moved from a house to an apartment. In the house and the apartment I had Uverse set up - and in both I had my desktop connected via a ~40 foot long cat5 cable. However, upon moving to the apartment I found that my ethernet connection no longer provides internet. This would seem like a mundane problem if not for: The router can see the computer on the network Windows 7 (the desktop's OS) detects no problems with the ethernet connection. Connections over the internet (i.e. browser windows, Pandora, etc.) do not immediately fail. Instead they load for 2 minutes and then finally give up. Devices connected over the Wifi (PS4, Laptop) access the internet just fine While removing the cat5 cable from my house, I accidentally damaged the locking tab but managed to bend it back into the appropriate position. I would suspect that a bad cat5 cable might be to blame if not for the above issues (thought I've heard bad cat5 cables cause the most nonsensical problems) and the fact that I tested the cat5 cable by having it share internet between my laptop (working internet) to my desktop and it functioned just fine and provided the desktop with internet. My ipconfig /all successfully finds a default gateway, DHCP server, and DNS server. What could possibly be causing the problem?

  Read the article

• RRAS VPN on windows 2k3 AD, can access rras server only.

  - by nopsax

  I'm setting up a test lab and here is the current configuration: 192.168.86.201 - a windows 2003 machine acting as PDC with AD/DNS/DHCP/WINS. 192.168.86.62 - windows 2003 machine is the RRAS server with IAS, also a file/print server. 192.168.86.6 - gateway/router to internet 192.168.86.21 - Windows XP Workstation Everything works on the internal network, File/Print/AD etc. Whenever a user connects via vpn to the RRAS server remotely using their domain credentials, they are assigned an ip address from the 192.168.86.201 machine along with the wins server address etc. The vpn user can then ping/access resources on the RRAS server, but cannot ping/access resources of any other machines by name or ip. However, if I ping by name, it does resolve to the correct ip address, just no replies. I did notice that on the RRAS server the 'internal' interface gets an ip address of 192.168.86.75 when a remote user connects, and the remote user is assigned, for example 192.168.86.71 . The RRAS server responds on both the .62 and .75 ip addresses. The client also unchecks the 'use remote default gateway option'. Also, I tried connecting a laptop to the physical network, joining the domain, then going remote and dialing the connection before domain login, and everything seems to work, e.g. browse-able shares via network neighborhood. But I can't really join the domain remotely if I cannot access any other resources. I really need to monitor traffic to see whats happening to those packets but won't be able to until this weekend. Any help is appreciated, will provide whatever configurations are needed.

  Read the article

• How can I manage AWS VPC ssh access accounts and keys across multiple instances?

  - by deitch

  I am setting up a standard AWS VPC structure: a public subnet some private subnets, hosts on each, ELB, etc. Operational network access will be via either an ssh bastion host or an openvpn instance. Once on the network (bastion or openvpn), admins use ssh to access the individual instances. From what I can tell all of the docs seem to depend on a single user with sudo rights and a single public ssh key. But is that really best practice? Isn't it much better to have each user access each host under their own name? So I can deploy accounts and ssh public keys to each server, but that rapidly gets unmanageable. How do people recommend managing user accounts? I've looked at: IAM: It doesn't like like IAM has a method for automatically distributing accounts and ssh keys to VPC instances. IAM via LDAP: IAM doesn't have an LDAP API LDAP: set up my own LDAP servers (redundant, of course). Bit of a pain to manage, still better than managing on every host, especially as we grow. Shared ssh key: rely on the VPN/bastion to track user activities. I don't love it, but... What do people recommend? NOTE: I moved this over from accidentally posting in StackOverflow.

  Read the article

• How to run a WebPy server on port 8080 using DDNS of dlink router and to access this site from internet?

  - by nuke1010

  I have two major issue with setting up a web server using my dlink DIR-600L router. Issue 1: I run a WebPy server on port 8080. But the DDNS service providers (like dlinkddns.com or dyndns.org) only allows port 80. I can run the server in port 80 with sudo command. But my server become vulnerable if i give root access. So I tried port forwarding in the router and server. But no use. I don't know if I done that correctly. Issue 2: Even though the server runs on port 80, I can access my site from my local machines only using registered domain names ( say, nikz.dyndns.org). No one on internet cannot load this site even when its totally up. As I observed server log, the request from other clients never reached my server. I need to run this server on port 8080 and i need to access this site from internet. How can I do it? any idea?

  Read the article

• I have added a port to the public zone in firewalld but still can't access the port

  - by mikemaccana

  I've been using iptables for a long time, but have never used firewalld until recently. I have enabled port 3000 TCP via firewalld with the following command: # firewall-cmd --zone=public --add-port=3000/tcp --permanent However I can't access the server on port 3000. From an external box: telnet 178.62.16.244 3000 Trying 178.62.16.244... telnet: connect to address 178.62.16.244: Connection refused There are no routing issues: I have a separate rule for a port forward from port 80 to port 8000 which works fine externally. My app is definitely listening on the port too: Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 99 36797 18662/node firewall-cmd doesn't seem to show the port either - see how ports is empty. You can see the forward rule I mentioned earlier. # firewall-cmd --list-all public (default, active) interfaces: eth0 sources: services: dhcpv6-client ssh ports: masquerade: no forward-ports: port=80:proto=tcp:toport=8000:toaddr= icmp-blocks: rich rules: However I can see the rule in the XML config file: # cat /etc/firewalld/zones/public.xml <?xml version="1.0" encoding="utf-8"?> <zone> <short>Public</short> <description>For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.</description> <service name="dhcpv6-client"/> <service name="ssh"/> <port protocol="tcp" port="3000"/> <forward-port to-port="8000" protocol="tcp" port="80"/> </zone> What else do I need to do to allow access to my app on port 3000? Also: is adding access via a port the correct thing to do? Or should I make a firewalld 'service' for my app instead?

  Read the article

• Either, nginx+php-fpm bad config or nginx+php-fpm cannot handle high query?

  - by The Wolf

  I have wordpress installed in my server configured(hopefully with nginx+php-fpm+mariaDB). I am trying to import using wordpress importer a 1.5MB xml file. Everytime I try to upload it using the importer, it got cut of... meaning just blank screen result.. Here is my error log: actually I just posted 2 of the errors [error] 858#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: xx.xxx.xx.xx, server: xxx.com, request: "GET xxxx.html HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" [error] 858#0: *13 connect() failed (111: Connection refused) while connecting to upstream, client: xxx.x.xx.xx, server: xxx.com, request: "GET xxxx.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "xxx.com" I don't know what is the reason why it can't process the wordpress export .xml. I already increased max_file_upload & etc., but nothing happens. Hope somebody can help me. Here are my conf: nginx.conf user nginx; worker_processes 8; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; server_tokens off; keepalive_timeout 65; fastcgi_read_timeout 500; #gzip on; client_max_body_size 2M; php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf [root@host etc]# vim php-fpm.conf [root@host etc]# vim php-fpm.conf ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes daemonize = no ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf ps aux [root@host etc]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 2900 1380 ? Ss Jun02 0:00 init root 2 0.0 0.0 0 0 ? S Jun02 0:00 [kthreadd/9308] root 3 0.0 0.0 0 0 ? S Jun02 0:00 [khelper/9308] root 124 0.0 0.0 2464 576 ? S<s Jun02 0:00 /sbin/udevd -d root 460 0.0 0.1 35976 1308 ? Sl Jun02 0:00 /sbin/rsyslogd -i /var/run/syslogd.pid -c 5 root 474 0.0 0.0 8940 1028 ? Ss Jun02 0:00 /usr/sbin/sshd root 481 0.0 0.0 3264 876 ? Ss Jun02 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 491 0.0 0.1 6268 1432 ? S Jun02 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/host.busilak.com. mysql 584 0.1 6.8 679072 71456 ? Sl Jun02 0:04 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib/mysql/plugin --use root 586 0.0 0.3 12008 3820 ? Ss Jun02 0:01 sshd: root@pts/0 root 629 0.0 0.0 9140 756 ? Ss Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 630 0.0 0.0 9140 520 ? S Jun02 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a pam -n 2 root 645 0.0 0.1 12788 1928 ? Ss Jun02 0:01 sendmail: accepting connections smmsp 653 0.0 0.1 12576 1728 ? Ss Jun02 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 691 0.0 0.1 7148 1184 ? Ss Jun02 0:00 crond root 698 0.0 0.1 6272 1688 pts/0 Ss Jun02 0:00 -bash root 1006 0.0 0.0 7828 924 ? Ss 00:30 0:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf nginx 1007 0.0 0.1 8156 1724 ? S 00:30 0:00 nginx: worker process nginx 1008 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1009 0.0 0.1 8020 1356 ? S 00:30 0:00 nginx: worker process nginx 1011 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1012 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1013 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1014 0.0 0.1 8024 1360 ? S 00:30 0:00 nginx: worker process nginx 1015 0.0 0.1 8024 1344 ? S 00:30 0:00 nginx: worker process root 1030 0.0 0.2 25396 2904 ? Ss 00:30 0:00 php-fpm: master process (/etc/php-fpm.conf) apache 1031 0.0 1.9 40700 20624 ? S 00:30 0:00 php-fpm: pool www apache 1032 0.0 2.0 41924 21888 ? S 00:30 0:01 php-fpm: pool www apache 1033 0.0 1.9 41212 20848 ? S 00:30 0:01 php-fpm: pool www apache 1034 0.0 1.9 40956 20792 ? S 00:30 0:01 php-fpm: pool www apache 1035 0.0 2.0 41560 21556 ? S 00:30 0:02 php-fpm: pool www apache 1040 0.0 1.8 39292 19120 ? S 00:30 0:00 php-fpm: pool www root 1125 0.0 0.0 6080 1040 pts/0 R+ 01:04 0:00 ps aux netstat -l [root@host etc]# netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 *:ssh *:* LISTEN tcp 0 0 localhost.localdomain:smtp *:* LISTEN tcp 0 0 localhost.locald:cslistener *:* LISTEN tcp 0 0 *:mysql *:* LISTEN tcp 0 0 *:http *:* LISTEN tcp 0 0 *:ssh *:* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 60575947 /var/run/saslauthd/mux unix 2 [ ACC ] STREAM LISTENING 60574168 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 60575873 /var/lib/mysql/mysql.sock Hope somebody can help me to figure out what is the problem.

  Read the article

• How To Get Browser To Open From Same Folder?

  - by Bad Learner

  I don't know how to make the title any more clear. Let me give an example - When I want to add an image to an article on my blog, I click "Browse" button in the image uploader, and then upload the image to the blog. The problem is, when I want to upload another image to my blog, I want the browser to look into the same directory; but it's always takes me to the "Recently Used" directory. Is there a way to change this? I hope I have made myself clear enough. EDIT: I only use Chrome, so I am referring to it.

  Read the article

• How to install Chrome browser properly via command line?

  - by Bad Learner

  Setting up and managing an Ubuntu server all by myself, in coming months, is a part of my current plans. Hence, I am planning a swtich from Windows to Linux - - Ubuntu. I now need to get some grip on the command line, since I am all used to Windows' GUI. Anyway... the most obvious start is installing apps on my computer, and I thought I should learn to do it via CLI. And this is what I did: $ apt-cache search chrome browser the results showed that the proper term is "chrome-browser," so... $ sudo apt-get install chrome-browser And then "Y" for the Y/n question. But the installation threw errors. (I do not have my PC at hand, so can't mention what error exactly.) Does someone see anything wrong with the commands I issued? I am probably missing some command(s) in between, I think.

  Read the article

• How do I access my samba drive through several layers of network topology?

  - by stephenmm

  I have a new windows 7 Home Premium machine that is in a different room than my main computer area. As such I have to use a bridge and another router. Everything is working wonderfully except I cannot access the SAMBA drive with the new machine. I know that SAMBA is accessible as an older WinXP machine can access it. A picture of my network would probably be helpfull: To ISP | | +---------------------------+ | WAN | | Cable Modem | | (2WIRE678) | | | | | +---------------------------+ | +---------------------------+ | | (|) (|) +-----------+ | Belkin Router | | | | Wireless | | (F5D) |--+ +--| WinXP | | | |SAMBA USER | | | +-----------+ +---------------------------+ | | | | +------------+ | | Ubuntu | | | Apache + | | |SAMBA Server| | +------------+ | | +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ # # +---------------------------+ | | | Netgear Bridge | | (XET1001) | | | +---------------------------+ | +---------------------------+ | | | D-Link Router | | (DI-524) | | | | | +---------------------------+ | | | | +-----------+ | | | Win7 | |SAMBA USER?| +-----------+ More interesting data points: 1. I can ping the SAMBA server from the Win7 machine locally (Ie. 192.168.2.2) 2. I can access the webserver from the Win7 machine locally (Ie. 192.168.2.2) 3. I followed the advice to get Win7 and SAMBA to play nice: http://www.tannerwilliamson.com/2009/09/windows-7-seven-network-file-sharing-fix-samba-smb/ Sorry for being so long winded but it is kind of complex and I am really at a loss as to how to fix it. If any of you have some suggestions I would love to hear it!

  Read the article

• IIS7: How to block access with a web.config file?

  - by neves

  I know that IIS7 allows me to have a per directory configuration with the web.config xml file. I have a directory with some configuration files that don't want to be web accessible. A local web.config file forbidding read access to it would be a nice solution. What should be the contents of a web.config file to forbid web access to the files? Edit: I'm trying to put a web.config file with these contents in a file: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <authorization> <deny users="*" /> <!-- Denies all users --> </authorization> </system.web> </configuration> But I can still directly access a file inside the directory. What's wrong with it? How do I debug what's happening?

  Read the article

• File Server Resource Manager attempting to access quota.xml on System Reserved partition?

  - by pmellett

  I've got a new install of Server 2008 R2 that is designed to be our quota server for user home directories and shared areas. I installed FSRM and set up a few quotas to try out. They worked fine but at some point over the weekend it's stopped loading the FSRM console quota screen and gives the following error, with Event ID 8228: File Server Resource Manager was unable to access the following file or volume: '\\?\Volume{73649de6-7f04-11e1-a344-005056b10310}\System Volume Information\SRM\quota.xml'. This file or volume might be locked by another application right now, or you might need to give Local System access to it. I have removed and reinstalled the FSRM Role Service, cleared the \System Volume Information\SRM folder on each volume and am at the verge of just starting again. I'd rather not since then I have to go through and set up all my NTFS permissions again. Since it looks like the service is trying to access the System Reserved partition, which I assume won't have any files it could possibly need, how do I remove System Reserved partition as a volume to be monitored for the quota service? (I am not aware of configuring that to be the case originally though!)

  Read the article

• How are you coping with Ubuntu's Unity app launcher? (It auto-hides, can't minimize apps)

  - by Bad Learner

  [Firstly, let me tell you that this cannot be subjective in anyway, as I think at least Ubuntu beginners will have these questions boggling in their mind; and yes, this is a question that has a definite answer - - so, I am completely within the rules.] Okay, coming to the point, I see that Ubuntu uses Unity since v10.xx (netbook edition?) and carried the same to v11.04 & v11.10. As someone who's stuck to Windows for all these years, it's somewhat difficult to cope with Ubuntu's Unity, for the following reasons: [1] The Unity app launcher (to the screen's left) auto-hides when a window is maximized. [2]- And once launched, apps cannot be minimized by clicking the app's icon in the launcher. I have to go to the top-left of the screen and click the "_" button. I do know I can fix these issues by installing some configuration tool. But the thing is, if that's how it's meant to work, Canonical/Ubuntu would have designed it that way. But they didn't. Why? w.r.t above points [1], [2]: [1] EDITED: So, does it mean, it's good to work without maximizing the windows? Because if I maximize the window, the app launcher hides. And I need to hover the mouse to the left of the screen, wait a bit (even if it's a sec or even less, I can still feel the lag), and then click on the next app icon in the launcher to switch to it. I do know, I can use Alt+TAB to switch, but I am not sure which window comes next. This, I feel, isn't productive. Also, this makes me feel, Ubuntu is designed for large screens (it's nice on my 1920x1080p screen), because I can have two windows side-by-side or something like that on a large screen. This is not possible on smaller screens. [2]- Being able to minimize an application's window by clicking on its icon in the launcher (just like it works on Windows & probably elsewhere) would have been great, rather than having to go to the top-left and clicking the _ (minimize) button which brings up the app launcher itself (from hiding) most of the time. It's too tiring to have these small issues in the UI. I really would like to know how you are coping with these issues the way they are?

  Read the article

• Display turns off when watching videos (then video starts to lag), how to fix it?

  - by Bad Learner

  Okay, here's the thing - - On my Ubuntu 11.10 64-bit installation, I have the display set to turn off automatically after 3 minutes of inactivity. There are two problems now: the display turns off even when I am watching videos. But I don't want to keep fiddling my mouse or keyboard when I am watching a movie. Okay, like I said above, the display turns off, then I move the mouse a bit each time, and the display turns back on. But now, the video doesn't play properly, it lags. A lot actually. Are these issues common? Can these be fixed?

  Read the article

• How To Investigate/Restore MySQL Permissions? MySQL ERROR 1045 (28000): Access denied for user

  - by Recc

  ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) Debian. mysqld is listening on 3306 supposedly Telnet to 3306 works Also tried binding it specifically yo localhost and then 127.0.0.1 which made no difference However: # netstat -ln | grep mysql unix 2 [ ACC ] STREAM LISTENING 78993 /var/run/mysqld/mysqld.sock # mysql -P3306 -ptest ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) Things I've tried: dpkg-reconfigure mysql-server-5.1 Doesn't help http://www.debian-administration.org/articles/442 Doesn't help This command (source): UPDATE mysql.user SET Password=PASSWORD('MyNewPass') WHERE User='root'; FLUSH PRIVILEGES; Doesn't help, in fact: Query OK, 0 rows affected (0.00 sec) Rows matched: 0 Changed: 0 Warnings: 0 So might the user be deleted? Extremely unlikely as all this started after packages update a colleague did and some separate services started screwing around but my colleague said he removed the offenders. Theres more: while # mysqld_safe --skip-grant-tables is running one can access the data tables, only with the valid passwords! So there's users and some authentication takes place hence the 0 rows affected above. Can the privileges tables be damaged somehow and how can I recreate/restore them when my only way of getting a mysql console is to skip them? Can I spare my reinstall of MySQL? Either way I did get a dump of the DBs now that I could get in with the above mode.

  Read the article

• Is there a clean way to obtain exclusive access to a physical partition under Windows?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive for writing. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it first. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. I'm not sure I want to do that. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away? What I'd be looking for, I suppose, is a way to put just partitions offline instead of whole physical drives.

  Read the article

• How to access XAMPP virtual hosts from iPad on local network?

  - by martin's

  Using XAMPP on one machine. Multiple virtual hosts defined. One per project. Format is .local For example: apple.local microsoft.local client-site.local our-own-internal-site.local All works perfectly from that one machine. I now want to have other systems within the network access the various sites. The main reason for wanting to do this is to be able to test site functionality and layout from mobile devices without having to upload partial work to public servers. I can access the main XAMPP default site by simply entering the IP address of the XAMPP machine in, say, Safari on an iPad. However, there is no way to reach .local that I can see. Would this entail setting up a DNS server within the network? We have a mixture of Windows and Mac machines. No Linux. The XAMPP machine is Vista 64. I don't want real external internet access to be affected in any way, just ".local" pointed to the XAMPP machine if that makes sense.

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• How do I restrict access to certain web files/folders on an IIS 7.5 based web server?

  - by cpuguru

  We're moving a website that was previously hosted on Win2k3 & IIS 6 to a Win2k8 R2 & IIS 7.5 platform. The website is public, but we want to restrict anonymous access to certain files and folders such that the user would be prompted for a password to access them. If this were Apache, a simple .htaccess file would serve the purpose. However, since it's IIS 7.5 and we're serving up mainly static HTML files and a few classic ASP pages I'm in a bit of a quandry as to how to restrict access to individual files and folders for various committees such that attempts to committee_1's files and/or folders would prompt the user for a password and, if entered correctly, would serve up their files. Same thing for committee_2 and so on. Under IIS 6, we would take away the read privileges for IIS_IUSRS and create a user called "committee_1" with a password known by the group and give that user read privileges to the files/folders. There's got to be a better (and more secure) way. Reminder, these are not *.aspx pages that are being served up. Any suggestions on how to password protect key files and/or folders under IIS 7.5 are much appreciated.

  Read the article

• VLAN across a router to give wireless access to remote sites?

  - by Don

  I've been looking online for this answer, but getting conflicting information. I was under the impression that you couldn't use a VLAN across a router, but maybe it's possible (according to some documentation I see online)? I was hoping someone could clear it up for me. Here's what I'm working with: We have a remote site with a handful of users. We recently gave them an access point (Cisco 1142n) for internal wireless. It's plugged into a switch and working fine (getting IPs from the same DHCP scope as the wired users are getting). Private wireless is set on VL50. At the home office we have private wireless for our internal network working and on VL50, with a test VLAN setup for VL60, which points to our DSL line for the time being. Both private and public wireless works fine internally (not crossing a router). VL50 is named the same at both sites for consistency in naming. If we wanted to give the remote site access to the public wireless (VL60), would that be possible across the routers? For more information, currently the site is connected to the home office via a T1 connection, Cisco routers on both ends. I didn't think it was possible due to the nature of VLANS being layer 2. But, I am from from an expert on this and would appreciate any instruction as to the actual truth of the matter. The end result I'm going for is, how to get our remote sites access to a public (outside) connection along with their private connection, without actually having a DSL (or similar type line) dropped at their location? Thanks in advance for your thoughts.

  Read the article

• Folder doesn't show up in explorer, cmd, and python even though I can access it, how can I fix this?

  - by Miebster

  I am accessing another computer on the network using a mapped network drive. The path looks like \\192.168.0.100\d$ which is mapped to my computer's "m" drive. I can access, view, create, delete, move, etc folders on this drive. However, some folders don't show up in windows explorer, even tho I can access them. Example: Lets say that M:\stuff\more_stuff is a directory. What I can't do: When windows explorer is pointed at M:\stuff I can't see more_stuff In cmd prompt pointed at M:\stuff "dir" doesn't find more_stuff In cmd prompt pointed at M:\stuff "dir /a" doens't find more_stuff In python, os.listdir at M:\stuff doens't find more_stuff What I can do: Typing M:\stuff\more_stuff into the address bar lets me access the folder like normal. Because there is no indication that this folder even exists, there could be more like them. I have no way of knowing how many folders are magically hidden on this mapped drive. What are some steps I can do to figure out why this folder is hidden? (With the end goal of making it no longer hidden).

  Read the article

• seaudit report detail

  - by user1014130

  I've just started using selinux in the last 6 months and am getting to grips with it. However, using sealert on a new CENTOS 6 server, Im not getting the level of detail I was with CENTOS 5. To illustrate: Running sealert -a /var/log/audit/audit.log On CENTOS 5 I get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Additional Information: Source Context root:system_r:postfix_postdrop_t Target Context system_u:object_r:httpd_log_t Target Objects /var/log/httpd/error_log [ file ] Source postdrop Source Path /usr/sbin/postdrop Port Host Source RPM Packages postfix-2.3.3-2.1.el5_2 Target RPM Packages Policy RPM selinux-policy-2.4.6-279.el5_5.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name server109-228-26-144.live-servers.net Platform Linux server109-228-26-144.live-servers.net 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:04:48 EDT 2010 x86_64 x86_64 Alert Count 1 First Seen Wed Jun 13 11:43:55 2012 Last Seen Wed Jun 13 11:43:55 2012 but on CENTOS 6 I just get: Summary: SELinux is preventing postdrop (postfix_postdrop_t) "getattr" to /var/log/httpd/error_log (httpd_log_t). Detailed Description: SELinux denied access requested by postdrop. It is not expected that this access is required by postdrop and this access may signal an intrusion attempt. It is also possible that the specific version or configuration of the application is causing it to require additional access. Allowing Access: Sometimes labeling problems can cause SELinux denials. You could try to restore the default system file context for /var/log/httpd/error_log, restorecon -v '/var/log/httpd/error_log' If this does not work, there is currently no automatic way to allow this access. Instead, you can generate a local policy module to allow this access - see FAQ (http://fedora.redhat.com/docs/selinux-faq-fc5/#id2961385) Or you can disable SELinux protection altogether. Disabling SELinux protection is not recommended. Please file a bug report (http://bugzilla.redhat.com/bugzilla/enter_bug.cgi) against this package. Im running exactly the same command. Does anyone have any idea why Im not getting the "Additional information" that I do with CENTOS 5? Thanks in advance Dylan

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >