Search Results

Search found 20114 results on 805 pages for 'network adapter'.

Page 246/805 | < Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

• Two DHCP Servers, Block Clients for one of them?

  - by Rilindo

  I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

  Read the article

• Router intermittently failing

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. All of these things work most of the time, but break down intermittently, for a few minutes at a time. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing between the bridge and my internet-facing interface: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw Ping(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Also, the router is currently "working", and I checked on a problematic client: arp infrastructure infrastructure.mydomain (10.47.94.1) at 0:23:54:bb:7d:ce on en0 ifscope [ethernet] I tried it when the router was down, and I (eventually) got the same response. It took about 30 seconds to return, though.

  Read the article

• Kubuntu not showing eth0

  - by Laurbert515

  I just installed Kubuntu 12.04.2 and do not have an internet connection. I also cannot access the Desktop and only have the terminal. When I enter xlcock I get Error: Can't open display:. I believe this is because I do not have the correct drivers and need to download them ... using the internet which I can't access. So here's what's going on ... ifconfig gives: lo Link ecap: Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:0 RX bytes:1296 (1.2 KB) TX bytes:1296 (1.2 KB) wlan0 Link encap: Ethernet HWaddr 68:17:29:58:49:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:16 errors:0 dropped:0 overrruns:0 frame:0 TX packets:16 errors:0 dropped:0 overrruns:0 frame:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lspci -nnk gives: 07:00.0 Network Controller [0280] Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) Subsystem: Intel Coporation Centrino Wireless-N 2230 BGN [8086:4062] Kernel driver in use: iwlwifi Kernel modules: iwlwifi 0d:00.0 Ethernet Controller [0200]: Atheros Communications Inc. AR8161 Gigabit Ethernet [1969:1091] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:fa77] I believe this means that it is using the ethernet connection but thinks it is a wireless connection. sudo lshw -class network gives: *-network description: Wireless interface product: Centrino Wireless=N 2230 ... *network UNCLAIMED description: Ethernet controller product: AR8161 Gigabit Ethernet I want to get the internet working so I can fix the GPU driver, etc. but I can't seem to get it working even though I have my ethernet cable plugged in (and I'm sure it is working).

  Read the article

• Alternate Out of Order TCP Packets problem

  - by Sunil

  I am having a network of windows and embedded nodes connected on a series of cisco switch. I have been seeing some serious network problems from few days. Used wireshark to capture the network trace and see every alternate tcp packets being marked as "out of order". Any pointers on how to troubleshoot this problem?

  Read the article

• Ubuntu 12.10 WiFi Problems

  - by Sean Webber

  I have a 32 bit machine running Ubuntu 12.10 with WiFi on it. I have a WPA2 network at home, but if I leave the USB Adapter plugged in while it boots, it infinitely keeps asking for the network password but never connects. If I plug it in after boot, it will connect but then I can't access ANYTHING on the LAN or Internet because "the DNS servers are unreachable". Now, if I leave the computer on a while, I get lucky sometimes and it MAGICALLY decides to connect for a little bit, lock the machine though and the Internet's gone again. The weirdest thing, is when I am connected but can't get to the internet, I do a netstat or ifconfig wlan0, I do have an IP address and everything. It says I'm connected but its not. I have a Realtek RTL8188CU USB adapter.

  Read the article

• Essential Business Server

  - by Dan

  We are trying to run the Preparation Wizard for Essential Business Server 2008 and receive the following error. "A list of servers could not be collected from Active Directory Domain Services (AD DS). Ensure that your network is functioning correctly and that this computer can access AD DS." Our network is an Windows Server 2003 network with all of the services running fine. I can't run this from either a machine or a server. Any idea where we should start?

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• Change TCP wait for ACK timeouts in Win7/WinServer

  - by maseth

  Is there any possibility to change default wait for ACK timeout in TCP network on Windows 7 or Windows Server ? I'm using very slow network ( 1200 bps ) and want to tweak TCP. When using default parameters network stuck on multiple retransmissions . If I'm able to change the ACK timeout and tx window size I think that it would work. On Windows XP it was possible but cant find any document for Win7 and Win Server.

  Read the article

• Add second ip address to an existing SQl 2008 failover clustering

  - by Cédric Boivin

  Hello, I got actually a failover cluster on Windows Server 2008, with sql server 2008. On each server i got two network card, with two different network one are on 10.10.10.x and other are on 192.168.99.x I want my sqlserver cluster listen on the two network. Is it possible and how i add new ip address. When i add a new ip address directly in the cluster, and i do a telnet on the 1433 port with the new cluster ip address it's not working. Thanks

  Read the article

• 412 Precodition Failed error only occurs on certain networks

  - by Andy

  One of my favorite websites: http://jessiejofficial.com (yes, I'm a Jessie J Fan :')) has recently started displaying the error message "412 Precondition Failed" whenever I visit it from my home network, even when I use Tor Browser. At first I thought that this was an issue with the whole website, however I have contacted the web developer and he has said that they has been plenty of hits within the last 48 hours. Plus, I discovered tonight that I can access the website from my phone, through the mobile network. So it appears to just be my network as all of the devices in my house connected to the WiFi display the same error when I try to visit any page of the site. However there have been no changes that we are aware of or are noticeable to our network since the website was accessible, and I have just heard that another person in a different part of the country is experiencing the same difficulties also. Any help/advice/suggestions would be appreciated greatly Update: When trying to ping 'jessiejofficial.com' in Windows command prompt the request times out on all four attempts, on any computer connected to the wireless network. I can now also confirm that the same thing occurs on my MacBook Pro.

  Read the article

• Send raw data to USB parallel port after upgrading to 11.10 oneiric

  - by zaphod

  I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

  Read the article

• Unable to enable wireless in ubuntu 12.04

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• How to make XAMPP virtual hosts accessible to VM's and other computers on LAN?

  - by martin's

  XAMPP running on Vista 64 Ultimate dev machine (don't think it matters). Machine / Browser configuration Safari, Firefox, Chrome and IE9 on dev machine IE7 and IE8 on separate XP Pro VM's (VMWare on dev machine) IE10 and Chrome on Windows 8 VM (VMware on dev machine) Safari, Firefox and Chrome running on a iMac (same network as dev) Safari, Firefox and Chrome running on a couple of Mac Pro's (same network as dev) IE7, IE8, IE9 running on other PC's on the same network as dev machine Development Configuration Multiple virtual hosts for different projects .local fake TLD for development No firewall restrictions on dev machine for Apache Some sites have .htaccess mapping www to non-www Port 80 is open in the dev machine's firewall Problem XAMPP local home page (http://192.168.1.98/xampp/) can be accessed from everywhere, real or virtual, by IP All .local sites can be accessed from the browsers on the dev machine. All .local sites can be accessed form the browsers in the XP VM's. Some .local sites cannot be accessed from IE10 or Chrome on the W8 VM Sites that cannot be accessed from W8 VM have a minimal .htaccess file No .local sites can be accessed from ANY machine (PC or Mac) on the LAN hosts on dev machine (relevant excerpt) 127.0.0.1 site1.local 127.0.0.1 site2.local 127.0.0.1 site3.local 127.0.0.1 site4.local 127.0.0.1 site5.local 127.0.0.1 site6.local 127.0.0.1 site7.local 127.0.0.1 site8.local 127.0.0.1 site9.local 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local httpd-vhosts.conf on dev machine (relevant excerpt) NameVirtualHost *:80 <VirtualHost *:80> ServerName localhost ServerAlias localhost *.localhost.* DocumentRoot D:/xampp/htdocs </VirtualHost> # ======================================== site1.local <VirtualHost *:80> ServerName site1.local ServerAlias site1.local *.site1.local DocumentRoot D:/xampp-sites/site1/public_html ErrorLog D:/xampp-sites/site1/logs/access.log CustomLog D:/xampp-sites/site1/logs/error.log combined <Directory D:/xampp-sites/site1> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory> </VirtualHost> NOTE: The above <VirtualHost *:80> block is repeated for each of the nine virtual hosts in the file, no sense in posting it here. hosts on all VM's and physical machines on the network (relevant excerpt) 127.0.0.1 localhost ::1 localhost 192.168.1.98 site1.local 192.168.1.98 site2.local 192.168.1.98 site3.local 192.168.1.98 site4.local 192.168.1.98 site5.local 192.168.1.98 site6.local 192.168.1.98 site7.local 192.168.1.98 site8.local 192.168.1.98 site9.local None of the VM's have any firewall blocks on http traffic. They can reach any site on the real Internet. The same is true of the real machines on the network. The biggest puzzle perhaps is that the W8 VM actually DOES reach some of the virtual hosts. It does NOT reach site2, site6 and site 9, all of which have this minimal .htaccess file. .htaccess file <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{HTTP_HOST} !^www\. RewriteRule ^(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </IfModule> Adding this file to any of the virtual hosts that do work on the W8 VM will break the site (only for W8 VM, not the XP VM's) and require a cache flush on the W8 VM before it will see the site again after deleting the file. Regardless of whether a .htaccess file exists or not, no machine on the same LAN can access anything other than the XAMPP home page via IP. Even with hosts files on all machines. I can ping any virtual host from any machine on the network and get a response from the correct IP address. I can't see anything in out Netgear router that might prevent one machine from reaching the other. Besides, once the local hosts file resolves to an ip address that's all that goes out onto the local network. I've gone through an extensive number of posts on both SO and as the result of Google searches. I can't say that I have found anything definitive anywhere.

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Random timeout now and then

  - by KenavR

  Maybe this is a to generic question, but since we have this issue for quite a while now, I give it a shot. We have some applications which use HTTP for the connection between the client (website or fat-client) and the server. The Computer who runs this applications is in a Network behind a firewall and a proxy, the server isn't inside the same network. The problem is that every now and then the https Request times out and depending on the Client the Application "hangs" or does some other funky stuff. The problem is definitely inside our network, because if i try the applications outside our network it works fine. Can you give me a hint where i can most likely find the problem?

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• An device with an unknown MAC address is connected to my router

  - by Yar

  There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

  Read the article

• Can't control connection bit rate using iwconfig with Atheros TL-WN821N (AR7010)

  - by Paul H

  I'm trying to reduce the connection bit rate on my Atheros TP-Link TL-WN821N v3 usb wifi adapter due to frequent instability issues (reported connection speed goes down to 1Mb/s and I have to physically reconnect the adapter to regain a connection). I know this is a common problem with this device, and I have tried everything I can think of to fix it, including using drivers from linux-backports; compiling and installing a custom firmware (following instructions on https://wiki.debian.org/ath9k_htc#fw-free) and (as a last resort) using ndiswrapper. When using ndiswrapper, the wifi adapter is stable and operates in g mode at 54Mb/s (whilst when using the default ath9k_htc module, the adapter connects in n mode and the bit rate fluctuates constantly). Unfortunately, with this setup I have to run my processor using only one core, since using SMP with ndiswrapper causes a kernel oops on my system. So I want to lock my bit rate to 54Mb/s (or less, if need be) for connection stability, using the ath9k_htc module. I've tried 'sudo iwconfig wlan0 rate 54M'; the command runs with no error but when I check the bit rate with 'sudo iwlist wlan0 bitrate' the command returns: wlan0 unknown bit-rate information. Current Bit Rate:78 Mb/s Any ideas? Here's some info (hopefully relevant) on my setup: Xubuntu (12.04.3) 64bit (kernel 3.2.0-55.85-generic) using Network Manager. My Router is from Virgin Media, the VMDG480. lshw -C network : *-network description: Wireless interface physical id: 1 bus info: usb@1:4 logical name: wlan0 serial: 74:ea:3a:8f:16:b6 capabilities: ethernet physical wireless configuration: broadcast=yes driver=ath9k_htc driverversion=3.2.0-55 firmware=1.3 ip=192.168.0.9 link=yes multicast=yes wireless=IEEE 802.11bgn lsusb -v: Bus 001 Device 003: ID 0cf3:7015 Atheros Communications, Inc. TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0cf3 Atheros Communications, Inc. idProduct 0x7015 TP-Link TL-WN821N v3 802.11n [Atheros AR7010+AR9287] bcdDevice 2.02 iManufacturer 16 ATHEROS iProduct 32 UB95 iSerial 48 12345 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 60 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 6 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) iwlist wlan0 scanning: wlan0 Scan completed : Cell 01 - Address: C4:3D:C7:3A:1F:5D Channel:1 Frequency:2.412 GHz (Channel 1) Quality=37/70 Signal level=-73 dBm Encryption key:on ESSID:"my essid" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=00000070cca77186 Extra: Last beacon: 5588ms ago IE: Unknown: 0007756E69636F726E IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1601080400000000000000000000000000000000000000 IE: Unknown: DD7E0050F204104A0001101044000102103B00010310470010F99C335D7BAC57FB00137DFA79600220102100074E657467656172102300074E6574676561721024000631323334353610420007303030303030311054000800060050F20400011011000743473331303144100800022008103C0001011049000600372A000120 IE: Unknown: DD090010180203F02C0000 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 iwconfig: lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"my essid" Mode:Managed Frequency:2.412 GHz Access Point: C4:3D:C7:3A:1F:5D Bit Rate=78 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0,

  Read the article

• Ubuntu 12.04 wireless disabled even though the direct connectin (thru modem) is working fine

  - by user90841

  Need help with my newly installed Ubuntu 12.04 system (dual booting along with Win 7), even thoguh I can use internet using the modem and directly plugging it, the wireless network is disabled and it says firmware missing. I tried the following options: 1) checking to see if the wireless is disabled using the hot keys (F2 or Ctrl+F2, Fn + F2 keys), the wireless is working fine in Win 7 but not in Ubuntu. 2) I am able directly plug the laptop with the modem and able connect to Internet using Ubuntu. 3) From the top right hand menu bar, te Wireless networks options say "device not ready (firmware missing) and the Enable Wireless checkbox is checked. 4) tried the command "rfkill list" , it shows all are NOT blocked. 0: phy0: Wireless LAN soft blocked:no Hard blocked: no 1: dell-wifi: Wireless LAN soft blocked:no Hard blocked: no 2: dell-bluetooth: BlueTooth soft blocked:no Hard blocked: no 3: hci0 Bluetooth soft blocked:no Hard blocked: no 5) ifconfig command shows eth0 and lo (lcoalhost) up and running but the wlan0 option is not available to show unless I type ifconfig -a, when it shows wlan0 but its down. 6) The command lspci -vvnn | grep 14e4 shows 04:00.0 network Controller [0280]: Broadcom Corp BCM4312 802.11b/g LP-PHY [14e4:4315] {rev 01) 08:00.0 Ethernet Controller [0200]: Broadcom Corp Netlink BCM5784M Gigabit Ethernet PCIe [1434:1698] {rev 10) 7) The file /var/lib/NetworkManager/NetworkManager.state shows all options are true (networking enabled, wireless enabled, wwlanenabled and wimaxenabled all options are set to true). 8) 'additional drivers' in your Dash and/or Preferences do not bring up anything at all. 9) output for lshw -C network shows *-network DISABLED description : Wireless interface physical id: 4 logical name: wlan0 serial: 78:e4_00"43:b6:ab capabilities: ethernet physical wireless Configuration: broadcast=yes driver=b43 driverversion=3.2.0.29-generic-pae firmware=N/A link=no multicast= yes wireless=IEEE 802.11bg

  Read the article

• Failure Scenarios in IP networks [closed]

  - by Karthik

  I am searching for a list of faults that may occur in a traditional IP network. To give you a better understanding of what I am looking for: For an MPLS-IP network the set of faults may be something as given in this cisco site. I want pointers to such kind of faults for a traditional IP network. Individual suggestions from you are welcome, but in doing so, please also provide a link to the official site from which you came with those failure scenarios.

  Read the article

• Proxy Server suggestions

  - by Jon Menefee

  Here is the question I have that hopefully is not too general of a question. I have a network with approximately 25 PC's, 3 servers and 25 IP cameras. I have a firewall already on the network and it works fine for what I need, but my client is asking me if there is a way to put a Proxy server on the network to monitor where his employees are going when they surf the Internet. He is not wanting to block them (at least not thru the Proxy server), but he wants to make sure that they arent going to sites that would compromise the networked PCs. I have looked at TMG and it is a little more than what I want. I hesitate adding another firewall to the system because of the security cameras that are presently on the network (IP Cameras). I just want to put a policy in AD that would make certain Users (or Computers) use a Proxy server. Any suggestions on a good proxy server are welcome. Thank you

  Read the article

• Internet connection issues after installing Windows Phone 8 SDK

  - by Mosquito

  first of all I must admit, that I'm not good in all this network stuff. I am using Windows 8 OS. On my laptop (Lenovo G570) I have installed Windows Phone 8 SDK and shortly after this I started having weird issues with internet connection. When I start my laptop, internet usually works fine, but after a few minutes it starts slowing down so much, that I'm not able to open a single page. Rebooting doesn't work, after several disabling and enabling network adapter, it usually works again for a few minutes and then again it stops. I'm sure it has something to do with Windows Phone 8 SDK, because problems started with this. With SDK there was also installed "vEthernet (Internal Ethernet Port Windows Phone Emulator Internal Switch)" network adapter. It is worth to note that problems occur mostly in my school network, not at home. Both at home and school I am using Wi-Fi connection. I hope the information given are enough to help me. Thanks in advance for any answers!

  Read the article

• (Windows 7) Dial Up Connection Locks up the Networking Service

  - by Nick

  I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

  Read the article

< Previous Page | 242 243 244 245 246 247 248 249 250 251 252 253  | Next Page >