Search Results

Search found 10800 results on 432 pages for 'e3 group'.

Page 247/432 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• m23 vs webmin vs landscape vs whatever you can propose, I need software to mantain a bunch of debian

  - by marc.riera

  Hello, I know there is landscape from canonical, but it has some $$ costs. Als there is webmin, and it can be used as a cluster management tool. Also there is m23, probably the most usable and interesting peace of manager software. But, what would you suggest to install and use on following configuration: 1) 100 desktop users, against an AD with quest authentication services installed. (ubunt8.04,9.04,9.10,10.04) 2) 50 servers (debian sid, lenny , ubuntu 8.04 and 10.04) We work on different software, so each group of persons need different configurations, each server has different pourposses, nothing is clusterized. And we have a good enough backup software. So , my objectives are: - easy install (deploy) - good reporting - easy logonscripts for users - easy bootupscripts for servers Thanks all for reading, and more thanks for your time. Marc

  Read the article

• Windows Load-Balancing, Forward-Proxying Software

  - by LandonC

  Does anyone know of any Windows software that will do forward-proxying load-balancing, like HAProxy does? There are tons of reverse-proxy solutions, but I can't find any that do what HAProxy does, that is, allows you to load-balance a group of forwarding-proxies. I have a proxy farm (don't ask) that I need to round-robin balance. HAProxy will do it, but is very unstable on Windows. Thoughts? I'd really appreciate it. And yes, this is an actual, production environment question.

  Read the article

• UAC-account-users can't see their mounted network-drives

  - by Daniel

  I wrote a few login batches in the Group Policy Management which mount specified devices to specified usergroups. The batches work as they should as long UAC is disabled. My problem is that the UAC-account-users can't see their mounted network-drives because the login scripts run in elevated context. I tried to fix the problem with PsExec (-l) so that the network-folders are mapped with limited user rigths. But it seems that this won't work. (PsExec is already installed on all computers so it can work local.) Has anyone an idea how to fix that problem? I spended a long time in trying to fix the problem but I did not find any solutions about THIS problem.

  Read the article

• Receiving "May not have permission to edit" warning, even though I have permissions

  - by Choy

  I'm using Panic Transmit as an FTP client connecting to an Ubuntu 12.x server. When I try to edit and upload a file using it, I receive the warning that tells me to check my permissions as I may not have permissions to edit a file. I'm not setting the permissions on upload and I do have permission to edit files. After clearing the warning and checking the file on the server, may changes go through. The files I'm trying to edit are set to 775 and are part of the www-data group which my user is part of as well. Any idea why I would be getting such a prompt? This only happens on some files, not all.

  Read the article

• Configuring Fortigate OS4 for FTPS

  - by Paul

  I configured iis7 ftp to allow ssl connections. I set the ssl firewall to use ports 50000-50050. If I set up a custom service on my fortigate firewall for ftps with source ports 990-50050 and destination ports 990-50050, set it to a firewall policy and connect from a client it connects and works successfully. If I create a service FTPS Control with source port 990 and destination port 990 and another service,FTP Data with source ports 50000-50050 and destination ports 50000-50050 add them to a group FTPSSL, replace the ftps policy with FTPSSL and try connecting it tries to connect to port 990 and eventually times out. Is there a way to configure the service to only use the ports I need and not every port from 990 up?

  Read the article

• RDP and New Accounts

  - by leeand00

  I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

  Read the article

• "Manual threading" in Thunderbird?

  - by sleske

  I use Thunderbird's threaded view of email messages to group emails together which are related. However, sometimes people will reply to messages using some mail program which does not properly set the headers to tell it's a reply, or will even write a new mail instead of replying. In these cases I would like to manually assign or "dock" a mail to an existing thread. Is there some way / addon to do this in Thunderbird? I'm thinking along the lines of a context menu "attach mail to thread XXX". The mail would then become part of that thread (maybe with a special marker explaining that it was manually grouped).

  Read the article

• setting up eclim to support php

  - by tipu

  i have the plugin pdt installed with my eclim using: DISPLAY=:1 ./eclipse/eclipse -nosplash -consolelog -debug \ -application org.eclipse.equinox.p2.director \ -repository http://download.eclipse.org/releases/helios \ -installIU org.eclipse.php.feature.group i compiled the thing using dargs for php: ant -Declipse.home=/home/tipu/downloads/eclipse -Dplugins=php but creating a project gives me: java.lang.IllegalArgumentException: Unable to find nature for alias 'php'. Supported aliases include: javascript=org.eclipse. wst.jsdt.core.jsNature, java=org.eclipse.jdt.core.javanature while executing command (port: 9091): -editor vim -command project_create -f "/home/tipu/phpproj2/" -n php thoughts on how to fix?

  Read the article

• What's an easy way to install a bunch of OSS apps in my home dir on my company's aging Redhat VNC servers?

  - by subopt

  My company's IT group doesn't want to install lots of common stuff on our VNC servers, which run RHEL 4. The list of stuff i want/need includes graphviz, midnight commander, various python libs, sqlite, netbeans, antlr, jdk1.6, etc. They've hobbled rpm somehow, so i can't do rpm --relocate. And i don't want the RHEL4 compatible revs of this stuff anyway. I've probably got the room to build all this stuff in my home dir, but i don't want to take forever tracking down dependencies. Looking for an easy way to get the apps/tools i need, and nothing (or very little) else. Any suggestions?

  Read the article

• Default permissions for courier imap folders

  - by JoeCoder

  I'm using courier imap. When a mail client creates a new folder, it's created on the filesystem with 640 permission. I need it to be writable by the group, or 660. I currently have /etc/courier/imapd IMAP_UMASK=007, but that's not enough. I'm not sure what else to try. Any ideas? I'm using ubuntu server 12.04. EDIT: I added a 50pt bounty to this. For an acceptable answer, I need a way to make it work from a package in a standard repo. If I download source and compile it myself, it won't be automatically kept up to date with security fixes. If I don't find a better answer, I'll add code to the admin script to call another sudo approved script to chmod -R the whole directory before every change. But this is kind of hack-ish.

  Read the article

• Excel help vlookup

  - by user123953

  I need a little help with some excel Employee Locations Hours OT Mr.One Station 1 40 6 Mrs.Seven Station 2 30 6 Mr.Two Station 3 30 4 Mr.Three Station 4 40 4 Mrs.Eight Station 1 32 6 Mr.Four Station 2 32 7 Mrs.Nine Station 3 40 6 Mr.Five Station 4 40 7 Mr.Six Station 1 25 2 Mrs.Ten Station 2 40 3 Mr.Eleven Station 3 60 1 I have spreadsheet with to worksheets one is the data sheet (shown above) on the other sheet is a summary, that has the Locations column as data validation list. I wanna use the data validation list to pull all the people and info from a specific location. I tried using a vlookup put I only know how to use to pull one person at a time not a group of specific to a location.

  Read the article

• gpupdate failing when using Samba 4 AD DC

  - by darthfoolish

  I have a Samba 4 AD domain running with 2 DCs on Centos 6.5, with a named DNS backend. I have multiple Windows 7 machines joined to this domain, which is fine. However, I can't get GPOs to apply. When running gpupdate, I get the following output The processing of Group Policy failed. Windows attempted to read the file \\sysvol\\Policies{31B2F340-016D-11D2-945F-00C04FB984F9}\gpt.ini Obviously, you don't normally see what it's trying to connect to when it's successful, but I would have thought the first place shows up, I should be seeing So, what governs what data gets put in between those angle brackets? If it is just supposed to be the domain, then what else could be going wrong? Thanks in advance for any help.

  Read the article

• Is there an effective tab manager for Google Chrome?

  - by Mahn

  I've tried a few extensions but I wasn't very satisfied, I'm basically looking for an extension that allows me to group sets of tabs in such a way that I'm able to quickly switch between the groups within the same window. That is to say, if I had 5 Wikipedia tabs and 5 Stack Exchange tabs, ideally I would create 2 groups, hide the tabs of one of them, and switch between the Wikipedia and Stack Exchange tabs back and forth as I need without leaving the same window (note that I'm not specifically looking for grouping by site, that was just a simplified example) Does an extension like this exist? PS: No, I don't actually have 5 Wikipedia tabs open while browsing Stack Exchange sites :-)

  Read the article

• Send mail from a distrobution groups email address

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us send email using the distrobution groups email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• Replication with SQL Server 2005 Express Edition and SQL Compact Edition 3.5

  - by Andy Gable

  I need some information on SQL Server 2005 Express edition. What I want to do is have my central database servin local machine databases IE back office Cental database |------------------- Shop floor Terminal 1 |------------------- Shop Floor Terminal 2 |------------------- Shop Floor Terminal 3 |------------------- Shop Floor Terminal 4 |------------------- Shop Floor Terminal 5 |------------------- Shop Floor Terminal 6 I want is so that Shop floor terminals would PULL down ANY changes to the database as and when they happen (selected changes are needed change would be Add new item / Edit Item info that is used by Shop floor terminal (ie price, description, sale group) Is this possible with SQL 2005? I have the ability to make my own Sync Applciation but I would need to know what to look for in the database that trigers a update Many thanks for any advice you can give Andy

  Read the article

• SQL Server Windows Auth Login not working

  - by Mr Shoubs

  I've had someone set up a domain controller on windows 2008 on one server, and sql server 2008 on another. The domain seems to be working fine, I'm logged on as a domain user on both servers, nothing seems to be a problem there. However, when I try to add a domain user/group to SQL Server Security (e.g. clicking ok from the create login screen) it says it can't find it (even though I've used the search to find the correct account in the first place), when I try to logon (even though I haven't added it yet) it says something about the account being part of an untrusted domain instead of saying I don't have permission to log on. Anyone have any ideas on what is set up incorrectly?

  Read the article

• CentOS, sudo Doesn't Accept root Password, but Logging in as root Works

  - by nicorellius

  I am new to Linux and I have CentOS running on a dual boot system. I was trying to edit a file requiring root permissions, so I used sudo. I typed the root password and it failed. This happened three times, and the process was ended. I then logged in as root (su) and was able to navigate to the file and make changes as root. Am I missing something? How would I edit the sudoers file such that this password would work? Or is there another way to log in to the sudo group to make these changes? How do I set sudo passwords?

  Read the article

• Secure PHP environments with PHP-FPM and SFTP

  - by pdd

  I'd like to set up secure environments for a small number of untrusted PHP websites on a Debian server. Right now everything runs on the same Apache2 with mod_php5 and vsftpd for administrative file access, so there is room for improvement. The idea is to use nginx instead of apache, SFTP through OpenSSH instead of vsftpd and chrooted (in sshd_config), individual users for each website with their own pool of PHP processes. All these users and nginx are part of the same group. Now in theory I can set 700 permissions on all PHP scripts and 750 on static files that nginx has to serve up. Theoretically, if a website is compromised all the other users' data is safe, right? Are there better solutions that require less setup time and memory per website? Cheers

  Read the article

• How can I get a scheduled task to run for a user regardless of which computer the user is logged onto?

  - by Ernst

  I've got a scheduled task that needs to run for a user at a specific time. However, the user sometimes logs onto one machine, the next day onto another, then next week onto yet another. At some pint during the day, the user might have to log onto another machine. How do I get the scheduled task to run regardless of which computer the user is using? I could of course create the task on all computers, but that seems a bit overkill. Running a script on log on (or a group policy) to create the task doesn't seem a good method either. Any ideas? Basically I want the scheduled task to be defined on the user instead of on the computer. If in the end I need to choose between the two options above, which is best?

  Read the article

• Restoring WordPress EC2 instance from snapshot results in 403 Forbidden error

  - by Eric Matthew Turano

  This problem has been perplexing me for weeks now. Here's how the issue goes: Launch Amazon Linux 64-bit instance, successfully install WordPress, and site is active w/ no issues Create snapshot of the instance's root volume Shut down instance Create volume from snapshot, attach to instance, and reboot instance Associate Elastic IP with instance Once that's done and I try logging onto the site, I am redirected to myurl.com/wp-admin/install.php and greeted with this message: Forbidden: You don't have permission to access /wp-admin/install.php on this server. Apache/2.2.25 (Amazon) Server at www.myurl.com Port 80 Port 80 is open on the inbound security group settings, so that's not the issue. Keep in mind all I am doing is merely creating a new volume and attaching it to the same instance, and this issue comes up. What am I doing wrong, and how can I create a complete backup of my instance without this error occuring?

  Read the article

• What could prevent one Amazon EC2 instance from pinging another instance's Private IP?

  - by ks78

  I have multiple Amazon EC2 instances which need to communicate using private IPs. However, so far I've been unable to ping one instance's private IP from another instance. I can ping external addresses, such as their Elastic IPs and other sites (yahoo, google, etc), so it seems there's nothing wrong with the instances' network configuration. Also, they are all in the same zone, so that shouldn't be an issue. Does anyone have any idea what I could be doing wrong? Could this related to the Security Group settings?

  Read the article

• Alfresco Community Edition Consultants

  - by Talkincat

  I am in the process of putting together an document management system based on Alfresco Community 3.2r2. Because Alfresco will not allow its partners to work with the Community edition, I have found it devilishly tricky to find consultants that specialize in Alfresco to help me with this project. Can anyone point me in the direction of someone that can help me get this system up an running? I will mostly need help with integrating Alfresco with Active Directory (LDAP passthrough, user/group sync and SSO) and performance tuning the system. Any help is greatly appreciated.

  Read the article

• Mapi session exceeds maximum count of type objtMessage

  - by wullxz

  one client (it's allways the same client) has often problems with mapi sessions killed by the exchange server. The Application Eventlog on the exchange logs eventid 9646 with source MSExchangeIS: Die MAPI-Sitzung '/o=xx/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=xxxx' hat die maximal zulässige Anzahl von 250 Objekten vom Typ 'objtMessage' überschritten. The client has no eventlogs logged about this error. I looked for installed Outlook Add-Ins and found the default add-ins from microsoft, an adobe pdf add-in (which I deactivated because it's not needed) and an "Octopus" plugin from telekom. Octopus is a CTI-application that connects to Outlook. My guess is, that Octopus (or its add-in) causes this error because this client has over 1100 contacts. My question is: how can I find out, which application/add-in causes this problem? Edit: I already looked at eventid.net but nothing helped. Edit2: Exchange-Cache-Mode is not used nor are there any shared folders / mailboxes open.

  Read the article

• Remote Desktop session on Windows Server 2003

  - by Dels

  I have some problem when I use Remote Desktop, here some description. I set some application to autorun each time Administrator (console) was login on W2K3 SP2 server I use Remote Desktop from XP SP3, using the same login as Administrator It creates a new session with the same username and the application starts autorun which make duplicity in application I just hoping i can enforce the Remote Desktop client to connect into only one session (console session), toying with Group Policy setting, successfully enforce the one session, but whenever i close remote desktop (disconnect) the console got disconnected too (which I didn't want it to behave like that). I also try some setting to limit connection, still it doesn't behave as I want it too. Simple i just want to use 1 session, but each time we close remote desktop the session still alive, much like when we use VNC solution (RealVNC, UltraVNC, TinyVNC etc.) Any solution(s)?

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >