Search Results

Search found 9617 results on 385 pages for 'fresh dev'.

Page 247/385 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

  • Black screen on latest Nvidia Cards when starting LightDM/Ubuntu

    - by Luis Alvarado
    Today I installed an Nvidia GT440 on my computer, changing the one that existed there, an Nvidia 9500GT. After changing it I started getting a problem where the screen just went black when loading the lightdm login screen (Where I punt my user and password). The thing is, if I disconnect the VGA cable and connect it again I get to see the lightdm greeter and everything works perfect. The problem is that I have to connect/disconnect every time I reboot the PC. I tried installing the 285.xx drivers. Same problem. I removed the Nvidia drivers installed with Jockey, rebooted, same problem. I install the current 280.xx again, same problem. After all that I installed a fresh install of Ubuntu, selected to install the Nvidia drivers while installing it from the livecd. After booting the same problem appeared. Dmesg does not say anything wrong about it. Same goes for the log from Jockey. What else should I check or what to do to solve it. Just to clarify, this does not happen BEFORE the lightdm greeter appears. Am guessing before the actual use of the video card with X starts with all the 2D/3D stuff that is used in ligthdm and unity. I can use any tty and even see the Ubuntu logo when starting. UPDATE: When I open a game in fullscreen the problem appears again. I have to unplug the monitor cable and plug it back in to see the game. Then when I quit the game I have to do it again to see the desktop. UPDATE 2: Today I bought a HDMI cable, connected the video card to the TV am testing it with and it actually did log in correctly without any black screen but it shows the resolution a little over the actual size of the screen. So I see only half of the launcher since the left side of it is hidden outside of the real resolution and the top bar is beyond the resolution. So the black screen is related to the VGA connection.

    Read the article

  • Iterative and Incremental Principle Series 2: Finding Focus

    - by llowitz
    Welcome back to the second blog in a five part series where I recount my personal experience with applying the Iterative and Incremental principle to my daily life.  As you recall from part one of the series, a conversation with my son prompted me to think about practical applications of the Iterative and Incremental approach and I realized I had incorporated this principle in my exercise regime.    I have been a runner since college but about a year ago, I sustained an injury that prevented me from exercising.  When I was sufficiently healed, I decided to pick it up again.  Knowing it was unrealistic to pick up where I left off, I set a goal of running 3 miles or approximately for 30 minutes.    I was excited to get back into running and determined to meet my goal.  Unfortunately, after what felt like a lifetime, I looked at my watch and realized that I had 27 agonizing minutes to go!  My determination waned and my positive “I can do it” attitude was overridden by thoughts of “This is impossible”.   My initial focus and excitement was not sustained so I never met my goal.   Understanding that the 30 minute run was simply too much for me mentally, I changed my approach.   I decided to try interval training.  For each interval, I planned to walk for 3 minutes, then jog for 2 minutes, and finally sprint for 1 minute, and I planned to repeat this pattern 5 times.  I found that each interval set was challenging, yet achievable, leaving me excited and invigorated for my next interval.  I easily completed five intervals – or 30 minutes!!  My sense of accomplishment soared. What does this have to do with OUM?  Have you heard the saying -- “How do you eat an elephant?  One bite at a time!”?  This adage certainly applies in my example and in an OUM systems implementation.  It is easier to manage, track progress and maintain team focus for weeks at a time, rather than for months at a time.   With shorter milestones, the project team focuses on the iteration goal.  Once the iteration goal is met, a sense of accomplishment is experience and the team can be re-focused on a fresh, yet achievable new challenge.  Join me tomorrow as I expand the concept of Iterative and incremental by taking a step back to explore the recommended approach for planning your iterations.

    Read the article

  • best way to "introduce" OOP/OOD to team of experienced C++ engineers

    - by DXM
    I am looking for an efficient way, that also doesn't come off as an insult, to introduce OOP concepts to existing team members? My teammates are not new to OO languages. We've been doing C++/C# for a long time so technology itself is familiar. However, I look around and without major infusion of effort (mostly in the form of code reviews), it seems what we are producing is C code that happens to be inside classes. There's almost no use of single responsibility principle, abstractions or attempts to minimize coupling, just to name a few. I've seen classes that don't have a constructor but get memset to 0 every time they are instantiated. But every time I bring up OOP, everyone always nods and makes it seem like they know exactly what I'm talking about. Knowing the concepts is good, but we (some more than others) seem to have very hard time applying them when it comes to delivering actual work. Code reviews have been very helpful but the problem with code reviews is that they only occur after the fact so to some it seems we end up rewriting (it's mostly refactoring, but still takes lots of time) code that was just written. Also code reviews only give feedback to an individual engineer, not the entire team. I am toying with the idea of doing a presentation (or a series) and try to bring up OOP again along with some examples of existing code that could've been written better and could be refactored. I could use some really old projects that no one owns anymore so at least that part shouldn't be a sensitive issue. However, will this work? As I said most people have done C++ for a long time so my guess is that a) they'll sit there thinking why I'm telling them stuff they already know or b) they might actually take it as an insult because I'm telling them they don't know how to do the job they've been doing for years if not decades. Is there another approach which would reach broader audience than a code review would, but at the same time wouldn't feel like a punishment lecture? I'm not a fresh kid out of college who has utopian ideals of perfectly designed code and I don't expect that from anyone. The reason I'm writing this is because I just did a review of a person who actually had decent high-level design on paper. However if you picture classes: A - B - C - D, in the code B, C and D all implement almost the same public interface and B/C have one liner functions so that top-most class A is doing absolutely all the work (down to memory management, string parsing, setup negotiations...) primarily in 4 mongo methods and, for all intents and purposes, calls almost directly into D. Update: I'm a tech lead(6 months in this role) and do have full support of the group manager. We are working on a very mature product and maintenance costs are definitely letting themselves be known.

    Read the article

  • Displaylink USB show "Logo / Loading" on monitor

    - by Ken Le
    I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

    Read the article

  • Why does switching users completely hang my system every time?

    - by Stéphane
    I have a fresh install of 11.04 64bit, with 2 administrator accounts and 4 normal accounts. The 4 normal accounts (the kids' accounts) don't have passwords, they can login simply by clicking on their names. When any of the users -- either admin or normal -- tries to switch to another account by clicking in the top-right corner of the screen and selecting another user, the screen goes black and the entire system locks up. Even CTRL+ALT+F1 through F7 does nothing. This is reproducible 100% of the time on this system. I can ssh into the box when the console locks up, and by running top, I see that Xorg is consuming about 100% of the CPU. Looking at the output of "ps axfu" in bash while the system is in this "locked up" state, here is the lightdm and X process tree: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1153 0.0 0.1 183508 4292 ? Ssl Dec26 0:00 lightdm root 2187 0.4 4.6 265976 164168 tty7 Ss+ 00:43 0:21 \_ /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch stephane 2612 0.0 0.3 266400 10736 ? Ssl 01:52 0:00 \_ /usr/bin/gnome-session --session=ubuntu stephane 2650 0.0 0.0 12264 276 ? Ss 01:52 0:00 | \_ /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu stephane 2703 0.8 3.0 562068 106548 ? Sl 01:52 0:08 | \_ compiz stephane 2801 0.0 0.0 4264 584 ? Ss 01:52 0:00 | | \_ /bin/sh -c /usr/bin/compiz-decorator stephane 2802 0.0 0.3 265744 13772 ? Sl 01:52 0:00 | | \_ /usr/bin/unity-window-decorator ...cut... root 3024 80.6 0.3 107928 13088 tty8 Rs+ 01:53 12:34 \_ /usr/bin/X :1 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch That last process, pid #3024 in this case, is what has the CPU pegged. In case it matters (I suspect it might) here is what I think may be the relevant information for my video card, taken from /var/log/Xorg.0.log: [ 3392.653] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 3392.653] (II) Module glx: vendor="FireGL - AMD Technologies Inc." [ 3392.653] compiled for 6.9.0, module version = 1.0.0 ... [ 3392.655] (II) LoadModule: "fglrx" [ 3392.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 3392.672] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 3392.672] compiled for 1.4.99.906, module version = 8.88.7 [ 3392.672] Module class: X.Org Video Driver ... [ 3392.759] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 3392.759] (--) fglrx(0): Chipset: "AMD Radeon HD 6410D" (Chipset = 0x9644) Lastly: I did see this posting: Change user on 11.10 hangs system ...but I checked, and the libpam-smbpass package isn't installed on this system.

    Read the article

  • Expanding Influence and Community

    - by Johnm
    When I was just nine years of age my father introduced me to the computer. It was a Radio Shack TRS-80 Color Computer (aka: CoCo). He shared with me the nuances of writing BASIC and it wasn't long before I was in the back seat of the school bus scribbling, on a pad of paper, the code I would later type. My father demonstrated that while my friends were playing their Atari 2600 consoles, I had the unique opportunity to create my own games on the Coco. One of which provided a great friend of mine hours and hours of hilarity and entertainment. It wasn't long before my father was inviting me to tag along as he drove to the local high school where a gathering of fellow Coco enthusiasts assembled. In these meetings all in attendance would chat about their latest challenges and solutions. They would swap the labors of their sleepless nights eagerly gazing into their green and black screens. Friendships were built and business partners were developed. While these experiences at the time in my pre-teen mind were chalked up to simply sharing time with my father, it had a tremendous impact on me later in life. This past weekend I attended the Louisville SQL Saturday (#45). It was great to see that there were some who brought along their children. It is encouraging to see fresh faces in the crowd at our  monthly IndyPASS meetings. Each time I see the youthful eyes peering from the audience while the finer details of SQL Server is presented, I cannot help but to be transported back to the experiences that I enjoyed in those Coco days. It is exciting to think of how these experiences are impacting their lives and stimulating their minds. Some of these children have actually approached me asking questions about what was presented or simply bragging about their latest discovery in programming. One of the topics that arose in the "Women in Technology" session in Louisville, which was masterfully facilitated by Kathi Kellenberger, was exploring how we could ignite the spark of interest in databases among the youth. It was awesome to hear that there were some that volunteer their time to share their experiences with students. It made me wonder what user groups could achieve if we were to consider expanding our influence and community beyond our immediate peers to include those who are simply enjoying their time with their father or mother.

    Read the article

  • Building SANE from git-source produce backend missmatch on 12.04 even if built locally

    - by deinonychusaur
    It seems to me that with Ubuntu Precise Pangolin it is all but easy to do a proper install of SANE from source (git-repo). I've found other scanning issues trying to find an answer to this, where the output people posted seems to indicate they suffer the same issue (unknowingly). If I run on a fresh install of Ubuntu 12.04 with compiled SANE source from the git I get: $ scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.22 (I basically followed the instructions on http://ubuntuportal.com/2012/02/how-to-get-an-canon-canoscan-lide-100-scanner-to-work-in-ubuntu-11-10linux-mint-12.html since I didn't find any other information making sure that sane was not installed prior to installation.) My primary interest is the epson2-backend. In 1.0.22 it offers the wrong TPU settings for Epson V700 (TPU2-mode wasn't supported in 1.0.22, and the scanner is useless to me if I don't have the TPU2-support). Since if I ask it to enter transparency mode, it shows 1.0.22 behaviour, it implies that the epson2-backend comes from 1.0.22 and not 1.0.24 even though I just built it. If I install SANE with prefix to a local folder and run that version of scanimage it still produces the mismatch. However, on another computer where I installed a custom 1.0.22 build of SANE prior to upgrading to Ubuntu 12.04, I can build and install the same SANE-git locally and have it correctly match backends: $ ./SANE/bin/scanimage -V scanimage (sane-backends) 1.0.24git; backend version 1.0.24 $ scanimage -V scanimage (sane-backends) 1.0.22; backend version 1.0.22 On this computer the 1.0.24 works correctly in finding TPU2 on Epson V700. So what am I missing/doing wrong? (And I want to replace 1.0.22 with 1.0.24 for the whole system, the local build was just debugging.) Any help would be much appreciated. Edit 1: Just tried compiling SANE using this instruction on Ubuntu 10.04 and it worked like a charm. However, when I upgraded to 12.04 (really would like to run 12.04), SANE was downgraded to 1.0.22. When trying the same set of instructions on 12.04 I was still out of luck -- the backend missmatch was there again (and I do have libusb-dev installed) Edit 2: I updated to Ubuntu 12.10 which now has the 1.0.23 SANE drivers. I haven't dared trying to compile from source on 12.10 since 1.0.23 is good enough for me. This is just a work-around and I would still like to know what's up with Ubuntu 12.04.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • Keep Learning After Your Oracle Training Class is Over - Save 50%!

    - by KJones
    Written by Amit Kumar, Senior Director Oracle University Digital Training        Every training class you take about the latest Oracle application or technology moves you closer to developing the skills you need to succeed. But after class is over, how do you keep up with today’s accelerating pace of innovation? To   To keep with the very latest technological advances, you need an ongoing and flexible training solution.       One that lets you learn during your own downtime.       Knowledge that’s easy to access.       Interactive lessons where you connect with experts.       A simple way to increase your knowledge, on your own time and at your own pace. The new Oracle Learning Streams is the flexible training solution you're looking for. Continuously Learn with Oracle Learning Streams Over time, Oracle Learning Streams help you develop the depth and breadth of knowledge that will give you the tools to become an expert in your field. By taking advantage of comprehensive and frequently updated information, you can keep learning continuously, at your own pace, when it's convenient for you. Sign up today and get 12 months of unlimited access to: •    Hundreds of videos delivered by Oracle experts for fresh and continuous product learning•    Live connections with Oracle's top instructors•    Robust video search capability to find exactly what you’re looking for•    Features that allow you to build your own custom learning queue and request new content Oracle Learning Streams are now available for Oracle Database and Oracle Middleware. Take a moment to preview the content now.  For a Limited Time - Save 50% For a limited time, save 50% when you order Oracle Learning Streams with any other Oracle Classroom, Live Virtual Class or Training On Demand course. Now there is no reason for learning to stop when class is over!

    Read the article

  • Migrating to Natty (or any other future versions of ubuntu)

    - by Nik
    I am hoping that this question would help other ubuntu users when migrating to a newer version of ubuntu. This should have all the info that they need. So please when you answer try to phrase them into points for easy understanding. I understand that some questions that I ask might have been asked before by other users. In that case just provide the links to those questions. I am running ubuntu 10.10 Maverick Meerkat in case that is important. I can say for sure that a clean install is definitely better than an upgrade since it gives you an opportunity to clean your system and get a fresh start. However some of us like to retain certain software configuration or files etc. The questions are as follows, How do you save the configuration files of certain application like for instance Thunderbird, firefox, etc...so that you can basically paste in the new version of ubuntu? (Thunderbird for instance has all my mail, so I definitely would like to backup its configuration and then use it the new installation that I do) I have some applications like MATLAB and Maple (Based on JAVA) installed. When I migrate, can I just copy the entire installation folder to the new version of ubuntu? Would it still work as now if I do that? When doing a backup which folders should be backed up? Obviously your personal files would be backup. But other than that, is it necessary to back up stuff in the home folder, /usr/bin etc? I have BURG installed. I am guessing that would be erased when I do a clean install along with the program's configuration and everything. How can I do a backup of it? I am dual booting my ubuntu alongside with Windows 7. When I perform the clean install of ubuntu, would GRUB (bootloader) be removed and in anyway jeopardize my windows installation? Over time I have added a lot of PPA which are of course compatible with my current ubuntu version. How do I make a backup of all my PPA and would they be compatible to the newer version of ubuntu when I restore them? I hope this covers all the questions or doubts that a user might face when thinking about performing a clean install of his system. If I missed anything please mention it as a comment and I will add it to my answer.

    Read the article

  • Changing jobs and leaving a project without a leader (aka, me)

    - by AnonUntilAfterTheEvent
    I'm the lead on a project that has been underway for about a year and a half. Two of us have been working on it. One is the database guy. I'm the javascript/ui guy. Which is to say, essentially no overlap in code knowledge. Here's the thing. Someone is about to offer me a sweet job with a nearly 30% bump in pay. Though I am perfectly happy with my current job and love the project, the new one would be better and I can't imagine saying no. The big problem is that my project is supposed to go into production starting in a few weeks. I will consider the new guys to have disqualified the new job by being bad people who would ruin my life if they won't cooperate and let me start after deployment. Since they seem like decent, ethical people, I don't expect that to be a problem. The current project will be brutalized by my absence. I take some comfort in the fact that I have emphatically requested an understudy for at least six months. That puts a little of the responsibility on the boss's head, but still, it's going to be a really bad thing. What do others of you do when you are a critical to a project when it's time to move on? Do I owe any obligation to stick around even though something better shows up? I know my spouse would object if I found someone else. Does that apply to work? I do have an understudy now, though he's fresh out of college. He's not going to replace me anytime soon. It's a small shop and the boss is going to be crushed. I am traumatized in anticipation of telling him and feel guilty about the practical consequences. I'm looking for some solace and some strategy about how to deal with this transition. Thank you for listening. =========================Subsequent notes ========================= @ChaosPandion, Chance: No, I can't stay to finish the project. I will insist on a compromise where I finish the current sprint (about a month from now) but there is at least a half year, probably a year of solid, full-time, work still to be done. I wouldn't expect the new employer to hold the job that long.

    Read the article

  • Ubuntu 13.XX unable to mount USB HDD. Tried everything. I/O error boot sector/file system

    - by XaviGG
    I know that there are many posts related but none of them helped me. I will jump to the last test because it is the one that should work, but it does not. An external HDD with single partition slow NTFS formatted in Windows, empty and clean. Checked for errors, it tells that not errors where found. Moving to Ubutnu 13.04... Gparted throws the first error when trying to read the disk: Input/output error It appears as unknown the content of the disk. Unable to create partition table or format it, getting the same error when trying. If I try to mount it in the terminal it tells me the same, specifying that also there is an I/O error reading the boot sector. I have this problem since I upgraded (always with fresh install) to 13.04. I thought it will be solved by the 13.10 but it has the same behavior. I tried with two different HDD (HD and SSHD) that work perfectly in Windows 7. In 13.04 at least I got a trying of mounting where the icon of the drive started showing and disappearing until finally it disappeared. But now it doesn't even try. Possible causes: -The HDD was my old main HDD, so it had WIN,RECOVERY,SYSTEM,UBU,SWAP partitions. Maybe the way or place where the partition table is defined is not the best for an external HDD but I don't know a lot in that topic. I would appreciate a lot if someone can give me a guideline to convert one of these HDD in a working external HDD. No files to recover, nothing to care about. Just format completely the disk and be able to use it for storing backups without having to move the files first to the windows partition, load windows and then copy them to the external HDD. Because I want to use a file comparator for the backups. Thanks a lot Edit 1: I found an option in Windows to convert it to a dynamic HDD that warns me that I wont be able to run O.S. after changing. I suppose that is what I need because in the current mode I cannot safely extract it. But it tells me an error that it couldn't change the mode.

    Read the article

  • Taking a Projects Development to the Next Level

    - by user1745022
    I have been looking for some advice for a while on how to handle a project I am working on, but to no avail. I am pretty much on my fourth iteration of improving an "application" I am working on; the first two times were in Excel, the third Time in Access, and now in Visual Studio. The field is manufacturing. The basic idea is I am taking read-only data from a massive Sybase server, filtering it and creating much smaller tables in Access daily (using delete and append Queries) and then doing a bunch of stuff. More specifically, I use a series of queries to either combine data from multiple tables or group data in specific ways (aggregate functions), and then I place this data into a table (so I can sort and manipulate data using DAO.recordset and run multiple custom algorithms). This process is then repeated multiple times throughout the database until a set of relevant tables are created. Many times I will create a field in a query with a value such as 1.1 so that when I append it to a table I can store information in the field from the algorithms. So as the process continues the number of fields for the tables change. The overall application consists of 4 "back-end" databases linked together on a shared drive, with various output (either front-end access applications or Excel). So my question is is this how many data driven applications that solve problems essentially work? Each backend database is updated with fresh data daily and updating each takes around 10 seconds (for three) and 2 minutes(for 1). Project Objectives. I want/am moving to SQL Server soon. Front End will be a Web Application (I know basic web-development and like the administration flexibility) and visual-studio will be IDE with c#/.NET. Should these algorithms be run "inside the database," or using a series of C# functions on each server request. I know you're not supposed to store data in a database unless it is an actual data point, and in Access I have many columns that just hold calculations from algorithms in vba. The truth is, I have seen multiple professional Access applications, and have never seen one that has the complexity or does even close to what mine does (for better or worse). But I know some professional software applications are 1000 times better then mine. So Please Please Please give me a suggestion of some sort. I have been completely on my own and need some guidance on how to approach this project the right way.

    Read the article

  • ATI propriatery drivers install latest 12.8, broke my kernel. Stuck on kernel 3.2.0-26

    - by user66987
    I messed up a bit. Hoping some here can help me. I tried to install the newest catalyst 12.8. Sadly, this broke my system. I was stuck in low graphics mode. I finally managed to restore the proprietary drivers, and get into ubuntu again. But now I am stuck on kernel 3.2.0.26. I had installed kernel 3.2.0-30, but the system no longer sees it. I have kernel 3.2.0-29 too, but the system cannot see that as well. In the grub menu. When I use sudo update-grub, they are both listed. Here are the output I get: Searching for GRUB installation directory ... found: /boot/grub Cannot determine root device. Assuming /dev/hda1 This error is probably caused by an invalid /etc/fstab Searching for default file ... found: /boot/grub/default Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst Searching for splash image ... none found, skipping ... Found kernel: /boot/vmlinuz-3.2.0-30-generic Found kernel: /boot/vmlinuz-3.2.0-29-generic Found kernel: /boot/vmlinuz-3.2.0-27-generic Found kernel: /boot/vmlinuz-3.2.0-26-generic Found GRUB 2: /boot/grub/core.img Found kernel: /boot/memtest86+.bin Updating /boot/grub/menu.lst ... done I have searched everywhere to find a solution to my problem, but can't find any solutions. If you need any log outputs to figure out the problem, please let me know which ones. Update: here is the output for grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b set locale_dir=($root)/boot/grub/locale set lang=nb_NO insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, med Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-26-generic } menuentry 'Ubuntu, med Linux 3.2.0-26-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-26-generic ...' linux /boot/vmlinuz-3.2.0-26-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-26-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, med Linux 3.2.0-25-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-25-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-25-generic ...' linux /boot/vmlinuz-3.2.0-25-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-24-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic } menuentry 'Ubuntu, med Linux 3.2.0-23-generic (gjenopprettelsesmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b echo 'Laster Linux 3.2.0-23-generic ...' linux /boot/vmlinuz-3.2.0-23-generic root=UUID=270c7c58-06d8-4e6b-b9bb-8d92f46adc0b ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd2,msdos1)' search --no-floppy --fs-uuid --set=root 270c7c58-06d8-4e6b-b9bb-8d92f46adc0b linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd1,msdos1)' search --no-floppy --fs-uuid --set=root 448AF3CE8AF3BA8E chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### How can I set kernel 3.2.0.30 as the default kernel? According to this file, kernel 3.2.0-30 does not exist.

    Read the article

  • Cannot install "ATI/AMD proprietary FGLRX graphics driver" (SystemError)

    - by Fisherman John
    I have just installed a fresh copy of 12.04.1 64bit. I formatted my PC completely and enabled updates during the installation. After the installation was complete, I went on updating my software. However, when I wanted to install the additional drivers using the Additional Drivers tool (namely "ATI/AMD proprietary FGLRX graphics driver"), it gave me this error: SystemError: E:Unable to correct problems, you have held broken packages. The same error shows up if I try installing the post-release updates driver. Installing the drivers from the terminal results in this output: XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." I get this using "sudo apt-get update": http://pastebin.com/AWAtDXjY But "sudo apt-get install fglrx" still get me this error: http://pastebin.com/RYM55bVN & "sudo apt-get -f install fglrx" gives me this error: http://pastebin.com/xxekajvP Any help would be greatly appreciated. (Please note that I'm new to Linux, coming directly from Windows. I have tried Ubuntu twice or so before, but it was not for a long period of time. The drivers got installed smoothly the few times I've tried Ubuntu, but post-release updates never worked for me.) [I am going to work now, so I can only answer from my phone. Can't really test any new solutions you may give me until ~10 hours from now on. Maybe more.] @stonedsquirrel When I try to run that command, I get this error: "XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." ie. I get the same error. ( I am Fisherman John, dunno how to login & thereby respond to your comment again _ )

    Read the article

  • The Problem Should Define the Process, Not the Tool

    - by thatjeffsmith
    All around awesome tool, but not the only gadget in your toolbox.I’m stepping down from my SQL Developer pulpit today and standing up on my philosophical soap box. I’m frequently asked to help folks transition from one set of database tools over to Oracle SQL Developer, which I’m MORE than happy to do. But, I’m not looking to simply change the way people interact with Oracle database. What I care about is your productivity. Is there a faster, more efficient way for you to connect the dots, get from A to B, or just get home to your kids or to the pub for happy hour? If you have defined a business process around a specific tool, what happens when that tool ‘goes away?’ Does the business stop? No, you feel immediate pain until you are able to re-implement the process using another mechanism. Where I get confused, or even frustrated, is when someone asks me to redesign our tool to match their problem. Tools are just tools. Saying you ‘can’t load your data anymore because XYZ’ isn’t valid when you could easily do that same task via SQL*Loader, Create Table As Selects, or 9 other different mechanisms. Sometimes changes brings opportunity for improvement in the process. Don’t be afraid to step back and re-evaluate a problem with a fresh set of eyes. Just trying to replicate your process in another tool exactly as it was done in the ‘old tool’ doesn’t always make sense. Quick sidebar: scheduling a Windows program to kick off thousands if not millions of table inserts from Excel versus using a ‘proper’ server process using SQL*Loader and or external tables means sacrificing scalability and reliability for convenience. Don’t let old habits blind you to new solutions and possibilities. Of couse I’m not going to sit here and say that our tools aren’t deficient in some areas or can’t be improved upon. But I bet if we work together we can find something that’s not only better for the business, but is also better for you. What do you ‘miss’ since you’ve started using SQL Developer as your primary Oracle database tools? I’d love to start a thread here and share ideas on how we can better serve you and your organizations needs. The end solution might not look exactly what you have in mind starting out, but I had no idea I’d be a Product Manager when I started college either What can you no longer ‘do’ since you picked up SQL Developer? What hurts more than it should? What keeps you from being great versus just good?

    Read the article

  • Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

    - by IcarusNM
    I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

    Read the article

  • Vlc And other Multi Media Problems

    - by MrMagu
    ive tried numerous Free Multimedia Programs on ubuntu and i get the same result when i go to watch one of my movies off my other hardrive it allways ends up full screening with a stuck image in the middle and vlc ends up looking pitch black. ive look all over the web for this issue im wondering if anyone is experinceing the same problems I Dont know if it has to do with the duel monitors ive tried adding and re adding the repositorys but it seems to be doing the same repetive thing for over a month now do i need to reinstall the whole system or what idk anyhelp please would be much appreciated Ty MrMagu Xorg Conf File nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 304.37 (buildd@allspice) Sun Sep 9 05:59:26 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: 1920x1080 +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-1: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Pictures http://tinypic.com/r/34o7j1h/6 http://tinypic.com/r/3rn20/6 Ty so Much Mr Magu

    Read the article

  • How do I prevent Ubuntu gradually slowing down to a stop?

    - by user29165
    I really do not know what is causing the problem of my desktop environment (D.E.) gradually slowing down. It seems to happen in Gnome 3.2, LXDE, XFCE, and KDE. I am running Ubuntu 11.10 and this problem started happening from a fresh install. I have noticed that if I restart Gnome or otherwise re-log-in with any of the D.E.s the speed resets to normal. I don't seem to have and memory leaks that account for it and there are not any processes that are using excessive CPU cycles. Due to the symptoms I am guessing that there is an underlying package that interacts with all D.E.s that is the source of the problem. Just to clarify, in extreme situations, if I let the slowdown continue without a restart of the D.E. my system will finally get to a point where everything, even my clock, freezes. The time over which Gnome slows down (noticeably after 17 hrs) is much less than LXDE, or XFCE but eventually they freeze as well. I didn't mention Unity since I haven't used it enough to verify the problem, but I don't see why it should be different. Just in case this is relevant, I Suspend my computer rather than turn it off. I do this because of the greatly reduced load time and the 17 hrs I stated above is actual up-time, not time where the D.E. is actually active. However, the slow down does not seem to be affected by how long the computer has been in suspend mode. I know that it is possible that this problem is due to an interaction between two or more of the applications that I use and as such it may not be able to be duplicated by others. In the end I am just wondering (a) are other people experiencing this issue and (b) does anyone have some advice on where to start looking for a solution if one is not already known. I am even open to the idea of switching to the beta release of 12.04 if anyone thinks it will solve the problem. Edit: I took a video of my latest freeze that you can watch at http://youtu.be/flKUqUzCmdE, sorry about the audio. Edit: Since that video I checked my memory for errors and tried installing the proprietary video drivers. No memory errors were found and the proprietary video drivers made the display unusable so I had to uninstall them. Any thoughts?

    Read the article

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

  • Is it possible to run dhcpd3 as non-root user in a chroot jail?

    - by Lenain
    Hi everyone. I would like to run dhcpd3 from a chroot jail on Debian Lenny. At the moment, I can run it as root from my jail. Now I want to do this as non-root user (as "-u blah -t /path/to/jail" Bind option). If I start my process like this : start-stop-daemon --chroot /home/jails/dhcp --chuid dhcp \ --start --pidfile /home/jails/dhcp/var/run/dhcp.pid --exec /usr/sbin/dhcpd3 I get stuck with these errors : Internet Systems Consortium DHCP Server V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ unable to create icmp socket: Operation not permitted Wrote 0 deleted host decls to leases file. Wrote 0 new dynamic host decls to leases file. Wrote 0 leases to leases file. Open a socket for LPF: Operation not permitted strace : brk(0) = 0x911b000 fcntl64(0, F_GETFD) = 0 fcntl64(1, F_GETFD) = 0 fcntl64(2, F_GETFD) = 0 access("/etc/suid-debug", F_OK) = -1 ENOENT (No such file or directory) access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb775d000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686/cmov", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/tls/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/i686", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/tls/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls/cmov", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/tls/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/tls", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/i686/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686/cmov", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/i686/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i686", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/cmov/libc.so.6", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/cmov", 0xbfc2ac84) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260e\1\0004\0\0\0t"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1294572, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb775c000 mmap2(NULL, 1300080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb761e000 mmap2(0xb7756000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x138) = 0xb7756000 mmap2(0xb7759000, 9840, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7759000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb761d000 set_thread_area({entry_number:-1 - 6, base_addr:0xb761d6b0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0 mprotect(0xb7756000, 4096, PROT_READ) = 0 open("/dev/null", O_RDWR) = 3 close(3) = 0 brk(0) = 0x911b000 brk(0x913c000) = 0x913c000 socket(PF_FILE, SOCK_DGRAM, 0) = 3 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 connect(3, {sa_family=AF_FILE, path="/dev/log"...}, 110) = 0 time(NULL) = 1284760816 open("/etc/localtime", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 fstat64(4, {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb761c000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\f\0\0\0\f\0\0\0\0\0"..., 4096) = 2945 _llseek(4, -28, [2917], SEEK_CUR) = 0 read(4, "\nCET-1CEST,M3.5.0,M10.5.0/3\n"..., 4096) = 28 close(4) = 0 munmap(0xb761c000, 4096) = 0 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Intern"..., 73, MSG_NOSIGNAL) = 73 write(2, "Internet Systems Consortium DHCP "..., 46Internet Systems Consortium DHCP Server V3.1.1) = 46 write(2, "\n"..., 1 ) = 1 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Copyri"..., 75, MSG_NOSIGNAL) = 75 write(2, "Copyright 2004-2008 Internet Syst"..., 48Copyright 2004-2008 Internet Systems Consortium.) = 48 write(2, "\n"..., 1 ) = 1 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: All ri"..., 47, MSG_NOSIGNAL) = 47 write(2, "All rights reserved."..., 20All rights reserved.) = 20 write(2, "\n"..., 1 ) = 1 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: For in"..., 77, MSG_NOSIGNAL) = 77 write(2, "For info, please visit http://www"..., 50For info, please visit http://www.isc.org/sw/dhcp/) = 50 write(2, "\n"..., 1 ) = 1 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl64(4, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(4, {sa_family=AF_FILE, path="/var/run/nscd/socket"...}, 110) = -1 ENOENT (No such file or directory) close(4) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=475, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb761c000 read(4, "# /etc/nsswitch.conf\n#\n# Example "..., 4096) = 475 read(4, ""..., 4096) = 0 close(4) = 0 munmap(0xb761c000, 4096) = 0 open("/lib/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/tls", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/tls/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/tls/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/tls/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/tls/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/tls/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/tls/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/tls", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/i486-linux-gnu/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/lib/i486-linux-gnu", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/tls/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/tls/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/tls/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/tls/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/tls/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/tls/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/tls/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/tls", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/i686/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/i686/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/i686/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/i686", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/cmov/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu/cmov", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/usr/lib/i486-linux-gnu/libnss_db.so.2", O_RDONLY) = -1 ENOENT (No such file or directory) stat64("/usr/lib/i486-linux-gnu", 0xbfc2ad5c) = -1 ENOENT (No such file or directory) open("/lib/libnss_files.so.2", O_RDONLY) = 4 read(4, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\320\30\0\0004\0\0\0\250"..., 512) = 512 fstat64(4, {st_mode=S_IFREG|0644, st_size=38408, ...}) = 0 mmap2(NULL, 41624, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 4, 0) = 0xb7612000 mmap2(0xb761b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 4, 0x8) = 0xb761b000 close(4) = 0 open("/etc/services", O_RDONLY|O_CLOEXEC) = 4 fcntl64(4, F_GETFD) = 0x1 (flags FD_CLOEXEC) fstat64(4, {st_mode=S_IFREG|0644, st_size=18480, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7611000 read(4, "# Network services, Internet styl"..., 4096) = 4096 read(4, "9/tcp\t\t\t\t# Quick Mail Transfer Pr"..., 4096) = 4096 read(4, "note\t1352/tcp\tlotusnotes\t# Lotus "..., 4096) = 4096 read(4, "tion\nafs3-kaserver\t7004/udp\nafs3-"..., 4096) = 4096 read(4, "backup\t2989/tcp\t\t\t# Afmbackup sys"..., 4096) = 2096 read(4, ""..., 4096) = 0 close(4) = 0 munmap(0xb7611000, 4096) = 0 time(NULL) = 1284760816 open("/etc/protocols", O_RDONLY|O_CLOEXEC) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=2626, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7611000 read(4, "# Internet (IP) protocols\n#\n# Upd"..., 4096) = 2626 close(4) = 0 munmap(0xb7611000, 4096) = 0 socket(PF_INET, SOCK_RAW, IPPROTO_ICMP) = -1 EPERM (Operation not permitted) time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: unable"..., 80, MSG_NOSIGNAL) = 80 write(2, "unable to create icmp socket: Ope"..., 53unable to create icmp socket: Operation not permitted) = 53 write(2, "\n"..., 1 ) = 1 open("/etc/dhcp3/dhcpd.conf", O_RDONLY) = 4 lseek(4, 0, SEEK_END) = 1426 lseek(4, 0, SEEK_SET) = 0 read(4, "#----------------------------\n# G"..., 1426) = 1426 close(4) = 0 mmap2(NULL, 401408, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb75b0000 mmap2(NULL, 401408, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb754e000 mmap2(NULL, 401408, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb74ec000 brk(0x916f000) = 0x916f000 close(3) = 0 socket(PF_FILE, SOCK_DGRAM, 0) = 3 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 connect(3, {sa_family=AF_FILE, path="/dev/log"...}, 110) = 0 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Inter"..., 74, MSG_NOSIGNAL) = 74 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Copyr"..., 76, MSG_NOSIGNAL) = 76 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: All r"..., 48, MSG_NOSIGNAL) = 48 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: For i"..., 78, MSG_NOSIGNAL) = 78 open("/var/lib/dhcp3/dhcpd.leases", O_RDONLY) = 4 lseek(4, 0, SEEK_END) = 126 lseek(4, 0, SEEK_SET) = 0 read(4, "# The format of this file is docu"..., 126) = 126 close(4) = 0 open("/var/lib/dhcp3/dhcpd.leases", O_WRONLY|O_CREAT|O_APPEND, 0666) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=126, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb74eb000 fstat64(4, {st_mode=S_IFREG|0644, st_size=126, ...}) = 0 _llseek(4, 126, [126], SEEK_SET) = 0 time(NULL) = 1284760816 time(NULL) = 1284760816 open("/var/lib/dhcp3/dhcpd.leases.1284760816", O_WRONLY|O_CREAT|O_TRUNC, 0664) = 5 fcntl64(5, F_GETFL) = 0x1 (flags O_WRONLY) fstat64(5, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb74ea000 _llseek(5, 0, [0], SEEK_CUR) = 0 close(4) = 0 munmap(0xb74eb000, 4096) = 0 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Wrote"..., 70, MSG_NOSIGNAL) = 70 write(2, "Wrote 0 deleted host decls to lea"..., 42Wrote 0 deleted host decls to leases file.) = 42 write(2, "\n"..., 1 ) = 1 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Wrote"..., 74, MSG_NOSIGNAL) = 74 write(2, "Wrote 0 new dynamic host decls to"..., 46Wrote 0 new dynamic host decls to leases file.) = 46 write(2, "\n"..., 1 ) = 1 time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Wrote"..., 58, MSG_NOSIGNAL) = 58 write(2, "Wrote 0 leases to leases file."..., 30Wrote 0 leases to leases file.) = 30 write(2, "\n"..., 1 ) = 1 write(5, "# The format of this file is docu"..., 126) = 126 fsync(5) = 0 unlink("/var/lib/dhcp3/dhcpd.leases~") = 0 link("/var/lib/dhcp3/dhcpd.leases", "/var/lib/dhcp3/dhcpd.leases~") = 0 rename("/var/lib/dhcp3/dhcpd.leases.1284760816", "/var/lib/dhcp3/dhcpd.leases") = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP) = 4 ioctl(4, SIOCGIFCONF, {0 - 64, NULL}) = 0 ioctl(4, SIOCGIFCONF, {64, {{"lo", {AF_INET, inet_addr("127.0.0.1")}}, {"eth0", {AF_INET, inet_addr("192.168.0.10")}}}}) = 0 ioctl(4, SIOCGIFFLAGS, {ifr_name="lo", ifr_flags=IFF_UP|IFF_LOOPBACK|IFF_RUNNING}) = 0 ioctl(4, SIOCGIFFLAGS, {ifr_name="eth0", ifr_flags=IFF_UP|IFF_BROADCAST|IFF_RUNNING|IFF_MULTICAST}) = 0 ioctl(4, SIOCGIFHWADDR, {ifr_name="eth0", ifr_hwaddr=00:c0:26:87:55:c0}) = 0 socket(PF_PACKET, SOCK_PACKET, 768) = -1 EPERM (Operation not permitted) time(NULL) = 1284760816 stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2945, ...}) = 0 send(3, "Sep 18 00:00:16 dhcpd: Open "..., 74, MSG_NOSIGNAL) = 74 write(2, "Open a socket for LPF: Operation "..., 46Open a socket for LPF: Operation not permitted) = 46 write(2, "\n"..., 1 ) = 1 exit_group(1) = ? I understand that dhcpd wants to create sockets on port 67... but I don't know how to authorize that through the chroot. Any idea?

    Read the article

  • TortoiseSVN hangs in Windows Server 2012 Azure VM

    - by ZaijiaN
    Following @shanselman's article on remoting into an Azure VM for development, I spun up my own VS 2013 VM, and that image runs on WS 2012. Once I was able to remote in, I started installing all my dev tools, including Tortoise SVN 1.8.3 64bit. Things went south once I started attempting to check out code from my personal svn server. It would hang and freeze often, although sometimes it would work - I was able to partially check out projects, but I would get frequent connection time out errors. My personal svn server (VisualSVN 2.7.2) runs at home on a windows 7 machine, and I have a dyndns url pointing to it. I have also configured my router to passthrough all 443 traffic to the appropriate port on the server. I self-signed a cert and made sure it was imported into the VM cert store under trusted root authorities. I have no problems connecting to my svn server from 4-5 other computers & locations. From the Azure VM, in both IE and Chrome, I can access the repository web browser with no issues. There are no outbound firewall restrictions. I have installed other SVN add-ons for Visual Studio (AnkhSVN, VisualSVN) and attempted to connect with my svn server, with largely the same results - random and persistent connection issues (hangs/timeouts). I spun up a completely fresh WS 2008 Azure VM, and installed TortoiseSVN, and had the same results. So I'm at a loss as to what the problem is and how to fix it. Web searches on tortoisesvn and windows server issues doesn't yield any current or relevant information. At this point, i'm guessing that maybe some setting or configuration that MS Azure VM images is the culprit - although I should probably attempt to spin up my own local WS VM to rule out that it's a window server issue. Any thoughts? I hope I'm just missing something really obvious!

    Read the article

  • Windows Server 2003 Trial Activation Issue

    - by Adam Batkin
    I have a Windows Server 2003 (R2 Enterprise with SP2) VM, originally installed with a trial license. We forgot about the server, and now more than 120 days has passed, and I can't do anything with the server. I seem to be at a dead end with the existing installation. When I log in, I get: The evaluation period for this copy of Windows has ended. Windows cannot start. To continue using Windows, please purchase and install a retail copy of the product. Fine. I'll do that with my MSDN media. I should add that safe mode works, but there isn't anything obvious that I found to help me there Next up, I tried repairing my installation: Boot from Server 2003 R2 Enterprise with SP2 media, tell it I want to install (as opposed to recovery console), then let it repair the existing install. Once that completes and reboots I log in: This copy of Windows must be activated with Microsoft before you can continue. You cannot log on until you activate Windows. Do you want to activate Windows now? To shut down the computer, click Cancel. Great! I click "Yes" and am left with a big blue screen. Not a blue screen of death, just a blue screen (i.e. the default windows desktop background color). No Ctrl+Alt+Del. All I can do is power cycle. I have some complex third-party software on there that I can't reinstall, which is why I haven't already built a fresh Windows VM and copied everything over. I have a backup of the VM from after trial period expired but before I installed anything. Ideas?

    Read the article

  • mod perl in apache 2.2 not parsing perl scripts

    - by futureelite7
    Hi, I've set up a fresh Apache 2.2.15 server on windows server 2008 R2 with mod_perl (mod perl v2.0.4 / perl v5.10.1). Mod_perl and Perl 5.10 has been installed and loaded without problems. However, despite my configuration, the mod_perl module is failing to recognize and execute my .pl file, instead opting to print out the perl source instead. What did I do wrong, and how do I make perl process my pl script instead of sending it to the client? My configuration: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "C:\Program Files (x86)\AWStats\wwwroot" ServerName analysis.example.com ServerAlias analysis.example.com ErrorLog "logs/analysis.example.com-error.log" CustomLog "logs/analysis.example.com-access.log" common DirectoryIndex index.php index.htm index.html PerlSwitches -T <Directory "C:\Program Files (x86)\AWStats\wwwroot"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <Directory "C:\Program Files (x86)\AWStats\wwwroot\cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all <FilesMatch "\.pl$"> SetHandler perl-script # #PerlResponseHandler ModPerl::Registry PerlOptions +ParseHeaders Options +ExecCGI </FilesMatch> </directory> </VirtualHost> Many many thanks for the help!

    Read the article

  • Penetration testing with Nikto, unknown results found

    - by heldrida
    I've scanned my new webserver and I'm surprised to find that in the results there's programs that I never installed. This is a fresh new install of Ubuntu 12.04 and just installed Php 5.3, mysql, fail2ban, apache2, git, a few other things. Not sure if related, but I've got Wordpress installed but this doesn't have anything to do with myphpnuke does it? I'd like to understand why am I getting this results ? + OSVDB-27071: /phpimageview.php?pic=javascript:alert(8754): PHP Image View 1.0 is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + OSVDB-3931: /myphpnuke/links.php?op=search&query=[script]alert('Vulnerable);[/script]?query=: myphpnuke is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + OSVDB-3931: /myphpnuke/links.php?op=MostPopular&ratenum=[script]alert(document.cookie);[/script]&ratetype=percent: myphpnuke is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + /modules.php?op=modload&name=FAQ&file=index&myfaq=yes&id_cat=1&categories=%3Cimg%20src=javascript:alert(9456);%3E&parent_id=0: Post Nuke 0.7.2.3-Phoenix is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + /modules.php?letter=%22%3E%3Cimg%20src=javascript:alert(document.cookie);%3E&op=modload&name=Members_List&file=index: Post Nuke 0.7.2.3-Phoenix is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + OSVDB-4598: /members.asp?SF=%22;}alert('Vulnerable');function%20x(){v%20=%22: Web Wiz Forums ver. 7.01 and below is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. + OSVDB-2946: /forum_members.asp?find=%22;}alert(9823);function%20x(){v%20=%22: Web Wiz Forums ver. 7.01 and below is vulnerable to Cross Site Scripting (XSS). http://www.cert.org/advisories/CA-2000-02.html. Thanks for looking!

    Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >