Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 247/750 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Map path server with workgroup to other server with domain

  - by bzamfir

  I have the following situation, and I need some help to setup properly I have two VPS (hosted with the same provider, maximumasp). Server A is 2008R2, set with WORKGROUP, and server B is 2012, set with domain, maximumasp.local. On server A I have an old web app, which uses a special folder, c:\MyUploads, to store uploaded files. App is using this using an appSetting. It will be kept running for a while for safety / compatibility reasons. I installed a new version of the application on server B, running under AppPoolIdentity. Both instances of the app (A and B) will connect to the same database, so I need them to share also the access to upload folder c:\MyUploads. How should I setup the app on machine B to access the folder c:\MyUploads ? My idea is to share the folder as \A\MyUploads, and then map it to server B. But the problem is, I don't know to give Read/write to c:\MyUploads on machine A to IIS AppPools\ on machine B I was trying a test, and shared the c:\MyUploads to Everyone, ReadWrite. I was able to access it from machine B using \\MyUploads But when app from machine B tried to access a file, it gave error. Any idea how can I accomplish this? Some advice on best practices for such situation would be great. Thank you

  Read the article

• 403 Forbiden on Apache (CentOS) Server

  - by pouya

  These are my VM setup: HOST: windows 7 ultimate 32bit GUEST: CentOs 6.3 i386 Virtualization soft: Oracle virtualBox 4.1.22 Networking: NAT -> (PORT FORWARD: HOST:8080 => GUEST:80) Shared Folder: centos all the project files goes into shared folder and for each project file a virtualhost conf file is created in /etc/httpd/conf.d/ like /etc/httpd/conf.d/$domain I wasn't able to see anything in my browser before disabling both windows firewall and iptables in centos after that if i type for example: http://www.$domain:8080/ all i see is: Forbidden You don't have permission to access / on this server. Apache/2.2.15 (CentOS) Server at www.$domain.com Port 8080 A sample Virtual Host conf file: <VirtualHost *:80> #General DocumentRoot /media/sf_centos/path/to/public_html ServerAdmin webmaster@$domain ServerName www.$domain ServerAlias $domain *.$domain #Logging ErrorLog /var/log/httpd/$domain-error.log CustomLog /var/log/httpd/$domain-access.log combined #mod rewrite RewriteEngine On RewriteLog /var/log/httpd/$domain-rewrite.log RewriteLogLevel 0 </VirtualHost> centos shared folder is availabe to guest at /media/sf_centos These are file permissons for sf_centos: drwxrwx--- root vboxsf vboxsf group includes: apache and root So these are my questions: 1- How to solve Forbidden Problem? 2- How to setup both host and guest firewalls? 3- How can i improve this developement environment to simulate production environment as much as possible specially security improvements?

  Read the article

• Server needs to ping outgoing before allowing connection

  - by QuintenVK

  Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

  Read the article

• Windows 7 32bit resolution is limited for HDTV monitor

  - by Nick

  I have a small Magnavox HDTV that i am using to test a Frankenstein PC build. The goal is to eventually connect to my old rear projection HDTV which supports 1080i via component input. The goal is also not to buy anymore stuff, otherwise i will just buy a smartTV and be done. I have a ATI Radeon HD 3450 with component out adapter YPrPb. The monitor supports 1080p, but over analog component out, should only go upto 1080i. I have had this working with another setup. On this particular setup, i have Windows 7 32bit, with the latest 12.8 catalyst drivers installed. the windows splash screen starts in 480p, then switches to 480i when the login prompt is shown. When try to change the resolution, 720x480 is the maximum value of the slider. I have also tried the "list all modes" and that also maxes out at 720x480. There are two options for this monitor in the devices seciton, Generic PNP monitor, and Generic non-PNP monitor. Neither setting fixes this. Any ideas on how to get 1080i?

  Read the article

• Linux iptables / conntrack performance issue

  - by tim

  I have a test-setup in the lab with 4 machines: 2 old P4 machines (t1, t2) 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t3) Intel e1000 1 Xeon 5420 DP 2.5 GHz 8 GB RAM (t4) Intel e1000 to test linux firewall performance since we got bitten by a number of syn-flood attacks in the last months. All machines run Ubuntu 12.04 64bit. t1, t2, t3 are interconnected through an 1GB/s switch, t4 is connected to t3 via an extra interface. So t3 simulates the firewall, t4 is the target, t1,t2 play the attackers generating a packetstorm thorugh (192.168.4.199 is t4): hping3 -I eth1 --rand-source --syn --flood 192.168.4.199 -p 80 t4 drops all incoming packets to avoid confusion with gateways, performance issues of t4 etc. I watch the packet stats in iptraf. I have configured the firewall (t3) as follows: stock 3.2.0-31-generic #50-Ubuntu SMP kernel rhash_entries=33554432 as kernel parameter sysctl as follows: net.ipv4.ip_forward = 1 net.ipv4.route.gc_elasticity = 2 net.ipv4.route.gc_timeout = 1 net.ipv4.route.gc_interval = 5 net.ipv4.route.gc_min_interval_ms = 500 net.ipv4.route.gc_thresh = 2000000 net.ipv4.route.max_size = 20000000 (I have tweaked a lot to keep t3 running when t1+t2 are sending as many packets as possible). The result of this efforts are somewhat odd: t1+t2 manage to send each about 200k packets/s. t4 in the best case sees aroung 200k in total so half of the packets are lost. t3 is nearly unusable on console though packets are flowing through it (high numbers of soft-irqs) the route cache garbage collector is no way near to being predictable and in the default setting overwhelmed by very few packets/s (<50k packets/s) activating stateful iptables rules makes the packet rate arriving on t4 drop to around 100k packets/s, efectively losing more than 75% of the packets And this - here is my main concern - with two old P4 machines sending as many packets as they can - which means nearly everyone on the net should be capable of this. So here goes my question: Did I overlook some importand point in the config or in my test setup? Are there any alternatives for building firewall system especially on smp systems?

  Read the article

• Allow outgoing connections for DNS

  - by Jimmy

  I'm new to IPtables, but I am trying to setup a secure server to host a website and allow SSH. This is what I have so far: #!/bin/sh i=/sbin/iptables # Flush all rules $i -F $i -X # Setup default filter policy $i -P INPUT DROP $i -P OUTPUT DROP $i -P FORWARD DROP # Respond to ping requests $i -A INPUT -p icmp --icmp-type any -j ACCEPT # Force SYN checks $i -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Drop all fragments $i -A INPUT -f -j DROP # Drop XMAS packets $i -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Drop NULL packets $i -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Stateful inspection $i -A INPUT -m state --state NEW -p tcp --dport 22 -j ACCEPT # Allow established connections $i -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow unlimited traffic on loopback $i -A INPUT -i lo -j ACCEPT $i -A OUTPUT -o lo -j ACCEPT # Open nginx $i -A INPUT -p tcp --dport 443 -j ACCEPT $i -A INPUT -p tcp --dport 80 -j ACCEPT # Open SSH $i -A INPUT -p tcp --dport 22 -j ACCEPT However I've locked down my outgoing connections and it means I can't resolve any DNS. How do I allow that? Also, any other feedback is appreciated. James

  Read the article

• Computer freezes after watching Youtube videos

  - by Roberts

  I had Windows 7 installed all september. But I installed Windows XP Professional back because my computer couldn't handle the new OS. After first boot I tried to install newest flash player (from Adobe website), but it failed. I had my old setup on USB drive and it worked. I don't know is it important or not. I am watching Youtube videos in my free time (almost every hour). After few days the computer started to freeze when I open a page with the video or close the page with video, not while I watch a video. No BSODs. Nothing in Event viewer. I use Firefox only. When computer freezes the sound wont. If iTunes is playing a radio station or is it another video playing in background, the sound wont freeze. Last few days the mouse wont freeze. Its a strange symptom. If I click few times then the cursor will actually freeze. I just want to know where does this problem come from (hardware - graphics card, old motherboard or it's just some glitch in setups). If it's not graphics card then I will be happy. The graphics card is ATI Radeon HD 4650 - brand new. Catalyst 11.8 installed. Things I have tried: Installed newest flash player after a week (the setup didn't fail this time) Installed latest video drivers Deleting cookies Defragmenting hard drive Using TuneUp utilities for computer cleenup Installed latest Mozilla Firefox Cleaned the PC Changed CPU Fan speed almost to max (just to be sure) Things I haven't tried yet: Didn't try playing videos on other browsers What can I do now?

  Read the article

• haproxy + nginx: https trailing slashes redirected to http

  - by user1719907

  I have a setup where HTTP(S) traffic goes from HAProxy to nginx. HAProxy nginx HTTP -----> :80 ----> :9080 HTTPS ----> :443 ----> :9443 I'm having troubles with implicit redirects caused by trailing slashes going from https to http, like this: $ curl -k -I https://www.example.com/subdir HTTP/1.1 301 Moved Permanently Server: nginx/1.2.4 Date: Thu, 04 Oct 2012 12:52:39 GMT Content-Type: text/html Content-Length: 184 Location: http://www.example.com/subdir/ The reason obviously is HAProxy working as SSL unwrapper, and nginx sees only http requests. I've tried setting up the X-Forwarded-Proto to https on HAProxy config, but it does nothing. My nginx setup is as follows: server { listen 127.0.0.1:9443; server_name www.example.com; port_in_redirect off; root /var/www/example; index index.html index.htm; } And the relevant parts from HAProxy config: frontend https-in bind *:443 ssl crt /etc/example.pem prefer-server-ciphers default_backend nginxssl backend nginxssl balance roundrobin option forwardfor reqadd X-Forwarded-Proto:\ https server nginxssl1 127.0.0.1:9443

  Read the article

• Can I have a single solid state drive and a RAID array on the same machine? [closed]

  - by jaminto

  Hi- To summarize, i'm looking to use a single solid state drive as my primary drive, and two conventional sata drives in a RAID 1 configuration for data. I am trying to install 64-bit Windows 7 onto this configuration. Is this possible? Here are the details: I built a desktop that has been running 64-bit Vista on two 500Gb in a RAID 1 array for a few years. I just purchased an Intel X25-M 80Gb Sata Solid-State Drive, and was planning on using this a my primary drive, and keeping the RAID 1 array as my data drive. I added the SSD drive and in the RAID setup, configured it as a RAID 0 array of only one disk. Then, I tried to do a clean install of windows 7 64-bit, but got stuck in the "Missing driver for CD/DVD drive" black hole of selecting driver files and Windows telling me that i don't have the appropriate driver for my hardware. The missing hardware is NOT a CD/DVD drive, since i'm installing off of my only CD/DVD drive. Plus at one point i was able to point it at a driver for my raid controller, and then my hard drives magically showed up as browsable sources for finding drivers for some other unnamed device that setup couldn't recognize. After a few hours of trying drivers (this was a very slow process) i decided to reboot and look at the BIOS settings. I'm using an ASUS M2A-VM motherboard which has an ATI SB600 RAID controller on board. I switched the "On board SATA Type" setting from "SATA" to "AHCI" thinking that since AHCI is an Intel thing, this would help. Unfortunately, this abandoned my RAID configuration, and my previously mirrored drives are showing up as separate drives when i boot into my current windows installation. Am i trying to do the impossible here? Should i just buy a separate SATA/RAID PCI card and plug the SSD into that? Any help would be greatly appreciated.

  Read the article

• Distributing Microsoft Office Template or Macro over the network

  - by zfranciscus

  We have around 400 users who use Word and we want to make their life easier by distributing templates and macros over the network. The easiest way to do this of course to setup a shared network folder and let them get the appropriate templates and macros. Of course, each user has to know where to copy these files to in their local PC, and we have to rely on constant email communication to let them know for newer version of the macro and templates. The next alternative is to ask them to configure Word to point to these network folder. But of course any disruption to the network means disruption to their work. We are thinking to setup a synchronization mechanism that downloads new templates to their local machine. We are also thinking to make this sync tool to prompt users that it will download new templates - you know just to give them visibility that they are receiving changes. We are wondering what is the best approach that people usually use in their workplaces ? Are there any specific tool that can make this task easier ?

  Read the article

• Is it possible to command a common router without using the web interface?

  - by MDeSchaepmeester

  Some background The internet arrangement in my student home is really weird. There is one ethernet outlet and several wifi hotspots. Either way requires a login through a web site to get internet access. This is annoying as each device needs to login seperately and with a PS3 for example, it is impossible to get connected at all since the web login procedure doesn't work. Therefore I have installed a D-Link DIR-635 router which is connected to the ethernet outlet. It has DHCP enabled so it uses NAT, but whatever it is connected to also uses NAT and I've read this should not work. A fellow student tried it with an Apple Airport but that keeps giving errors related to NAT after NAT. Anyway my setup does work so bonus points if you can clarify this. I need to login to the web site I mentioned earlier with any device, after which all devices in my LAN have connectivity. This is great. Except... In short From time to time, I lose internet connectivity and my D-Link DIR-635 router needs to do a DHCP renew. I can do this via the web interface but my life would be easier if I could just run a cmd file which tells my router to do this without all the hassle. This would setup a connection to my router and execute the proper command. I have tried googling but couldn't find much helpful stuff.

  Read the article

• Setting up a virtual ftp directory that points to another computer

  - by AngryHacker

  I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• Remotely port forward/launch process or a client-less remote desktop app?

  - by DC177E

  I have an XP box running Logmein at a remote location behind a linksys router, which was running well for a whole of four days, until we had a power failure. Our ISP gave us a new IP, the machine restarted, and logmein did not autorun (or, at least, it did not automatically sign in), and our service (which may or may not be a Minecraft server with non-backed-up save files) also did not run upon startup. Logmein does not register the new IP (it still displays the old one). I have a DDNS updater service, so I do know the new dynamic address. I have tried using the built in XP remote desktop service, but, as with almost all non-cloud-based remote desktop services, it requires a port forward. Thus, I would appreciate it if anyone has any ideas as to: A: Any way of accessing our router remotely to forward the remote desktop port. I've seen the Remote Management option (forwarding the setup page to port 8080), but I do not have it enabled. I've tried UPnP, but again, the setup page for our router is not forwarded. B: Any way of remotely launching a process that does not require port forwarding (or uses ports 255XX, 18XXX, or 9000.), such as a remote console service built into XP. I realize this is a near impossibility. C: A Way to remotely start logmein, and sign in, which is likely a definite impossibility. Sorry if this is too specific for Stackexchange, or if I've put it into the wrong section (is SuperUser the correct place for this?). Ideas would, again be much appreciated, as shot-in-the-dark-like this may be.

  Read the article

• How to divert traffic based on hostname using HAProxy?

  - by Bosky

  I've had some initial success with HAProxy setting up a bunch of app servers listening on various other ports. I now have another webserver listening on one port, and i'd like to what changes to make to my config to flow traffic by hostname as well. The following is the current setup, assuming: my apache webserver is running at examplecom:8001 my bunch of app servers 0.0.0.0:8081, 0.0.0.0:8082 , 0.0.0.0:8083 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 debug #quiet #user haproxy #group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appservers 0.0.0.0:80 mode http balance roundrobin option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 server inst1 0.0.0.0:8081 cookie server01 check inter 2000 fall 3 server inst2 0.0.0.0:8082 cookie server02 check inter 2000 fall 3 server inst3 0.0.0.0:8083 cookie server01 check inter 2000 fall 3 server inst4 0.0.0.0:8084 cookie server02 check inter 2000 fall 3 capture cookie vgnvisitor= len 32 (any other comments on the ^ setup are welcome.) Now I'd like to continue the same above, but in addition in case - if the hostname is myspecialtopleveldomain<dot>com, then would like to flow traffic to example<dot>com:8001 ~B

  Read the article

• Changing farm account in Sharepoint 2010

  - by user55709

  After changing the the farm account to a domain user account I get the following error when trying to access the Central Administration page: "Cannot connect to configuration database" After I realized the headache may not be worth it, I decided to a reinstall using the following SP user account guidelines: http://technet.microsoft.com/en-us/library/ee662513.aspx After getting everything up, I am getting an error when using the designated farm account under the Central Admin Website Manage Service Accounts: "Access denied" If it is the farm administrator, why would I not be able to manage service accounts? I am able to access the other part of the admin site. Also, when logging in with the farm account it lists me as a "system account" not the domain account which I used for log in. Am I missing something or is this normal behavior? Am I not suppose to login with the farm account? When I log in with the Setup account (also a domain account) I can access everything with no errors on the site. The only difference between the two accounts is one has local admin privileges on the Sharepoint farm server which is the setup account. if you notice those privileges are not necessary for the farm account according to the article cited.

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• USB Hub vs. Dockinstation USB vs. Laptop USB

  - by Will

  I recently had thougts about my current setup in my office, especially about the UBS ports distribution. Here's my setup: I have a Lenovo T410 docked to a Lenovo Dockingstation Series 3, that providey me with 6 USB ports, which I use all (3 ext. drives, mouse, keyboard, USB Hub of monitor). The USB hub on my ext. monitor (most probably powered by the ext. monitor's power supply) provides me with 2 USB ports, where I use one for my webcam and another for USB sticks. On my T410 itself I have 4 USB slots, that are usually not used, as don't want to mess with USB plugs when undocking my laptop, now and then I plug my printer on one of these, just because I don't have any UBS ports left. Now I'm wondering how fast each of these slots are: I assume that all the 6 USB ports from the dockinstation somehow go through the docking connector on the bottom of my laptop. Does this connector has such a big bandwidth for all these 6 USB ports to perform like if they were dedicated ports as the 4 ones on my laptop? Also how is generally the performance of USB hubs (like the one on my ext. monitor?)?

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

• IPtables and Remote Desktop with Proxy

  - by Sebastian

  So I setup a windows 2008 web server R2 on VirtualBox. Currently using Bridged Network. I can remote desktop to the machine hosting the VM (10.0.0.183) but cannot remote desktop to the VM itself (10.0.0.195). The remote port on the VM set to 5003. VM setup to accept remote connections (windows side). We also use a proxy for our internet, and I added these rules under NAT. (centOS 5) on our proxy box. -A INPUT -p tcp --dport 3389 -j ACCEPT -A REROUTING -i ppp0 -p tcp --dport 3389 -j REDIRECT --to-port 5003 -A FORWARD -d 10.0.0.195 --dport 5003 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT I've been trying for hours and hours and just cannot get it to work. I also used freedns so that we can use a domain name to connect too this VM over the internet. (the DNS points to our external IP address). If we don't get this right we will have to purchase a PPoE from an ISP to connect to this VM remotely, but I know that there is an alternative route if I can just get this port forwarding right!

  Read the article

• "No such file or directory"?

  - by user1509541

  Ok, so I have a VDS laying around, and I thought I would turn it into a TF2 game server. When I connect to my server through PuTTY, and use wget to download the package "hldsupdatetool.bin" from Steampowered.com. I go to run it and it says "No such file or directory found". When I use "ls" to see what files are in directory, it lists "hldsupdatetool.bin" as being in the directory. So, why is it saying it's not there? This has been a headache for the past 2 days. It's returning: root@10004:~# wget http://www.steampowered.com/download/hldsupdatetool.bin --2012-07-08 06:04:49-- http://www.steampowered.com/download/hldsupdatetool.bin Resolving www.steampowered.com... 208.64.202.68 Connecting to www.steampowered.com|208.64.202.68|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3513408 (3.4M) [application/octet-stream] Saving to: “hldsupdatetool.bin.3” 100%[======================================>] 3,513,408 2.45M/s in 1.4s 2012-07-08 06:04:51 (2.45 MB/s) - “hldsupdatetool.bin.3” saved [3513408/3513408] root@10004:~# chmod +x hldsupdatetool.bin.3 root@10004:~# ./hldsupdatetool.bin.3 -bash: ./hldsupdatetool.bin.3: No such file or directory root@10004:~# More: root@10004:~# ls ffmpeg-packages hldsupdatetool.bin.1 hldsupdatetool.bin.3 hldsupdatetool.bin hldsupdatetool.bin.2 setup.sh root@10004:~# ls -la total 13828 drwx------ 4 root root 4096 Jul 8 06:04 . drwxr-xr-x 21 root root 4096 Jul 8 05:57 .. -rw------- 1 root root 8799 Jul 8 06:26 .bash_history -rw-r--r-- 1 root root 570 Jan 31 2010 .bashrc -rw-r--r-- 1 root root 4 Jul 2 19:39 .custombuild drwxr-xr-x 2 root root 4096 Jul 4 18:49 ffmpeg-packages ---x--xrwx 1 root root 3513408 Sep 2 2005 hldsupdatetool.bin -rwxr-xr-x 1 root root 3513408 Sep 2 2005 hldsupdatetool.bin.1 -rw-r--r-- 1 root root 3513408 Sep 2 2005 hldsupdatetool.bin.2 -rwxr-xr-x 1 root root 3513408 Sep 2 2005 hldsupdatetool.bin.3 -rw-r--r-- 1 root root 140 Nov 19 2007 .profile -rw------- 1 root root 1024 Jul 2 19:49 .rnd -rwxr-xr-x 1 root root 38866 May 23 22:02 setup.sh drwxr-xr-x 2 root root 4096 Jul 2 19:44 .ssh root@10004:~#

  Read the article

• Multiple SSL certificates on one server

  - by Kyle O'Brien

  We're hosting two websites on our fairly tiny but dedicated production server. Both website require SSL authentication. So, we have virtualhosts set up for both of them. They both reference their own domain.key, domain.crt and domain.intermediate.crt files. Each CSR and certificate file for each site was setup using its own unique information and nothing is shared between them (other than the server itself) However, which ever site's symbolic link (set up in /etc/apache2/sites-enabled) is reference first, is the site who's certificate is referenced even if we're visiting the second site. So for example, assume our companies are Cadbury and Nestle. We set up both sites with their own certificates but we create Cadbury's symbolic link in apache's site-enabled folder first and then Nestle's. You can visit Nestle perfectly fine but if you check the certificate installation, it reference's Cadbury's certificate. We're hosting these websites on a dedicated Ubuntu 12.04.3 LTS server. Both certificates are provided by Thawte.com. I came across a few potential solutions with no degree of success. I'm hoping someone else has a decent solution? Thanks Edit: The only other solution that seems to have provided success to some people is using SNI with Apache. However, the setups here didn't seem to coincide with our setup at all.

  Read the article

• How can I document and automate a system's configuration?

  - by Diomidis Spinellis

  Having a system's configuration represented by its current state is risky, inefficient, and opaque. At some point you may be left with an unsupported system and no upgrade path. Then configuring a new system compatible with the old is a process or trial and error. Furthermore, if at some point the system is damaged the only option is to go back to the most recent full backup, and try to remember what changes followed from that point. Also, the only way to create a system compatible with the original is through a complete dump/restore. Finally, in such a setup there's no way to know how you solved a particular problem; the only thing you can do is to look at the corresponding configuration files and try to guess what you changed to achieve the desired effect. Currently for each system I maintain, I keep a log file where I record all system administration activity, starting from the installation: installation options, added packages, changes in configuration files, updates, problem fixes etc. In theory this allows me to (manually) replay all changes to arrive at the current state, or to unroll an erroneous change by executing the reverse commands. However, this process is also inefficient, error-prone, and relies on human judgment. Another thing I've tried is to put /etc configuration files under version control with git. This helps me document the changes automatically and also apply them on a clean setup. But it's not without problems: git has to run under sudo, passwords and private keys may be stored in the repository, installed packages can't be meaningfully tracked, and git will have a fit if I try to extend this approach to all the system's directories. I've also thought about performing all changes through shell scripts or makefiles, but I think this process will require a lot of effort and will be fragile. Are there some better methods or tools that I'm missing?

  Read the article

• Windows Server 2008 - Non-Domain users can see my server shares

  - by ManovrareSoft

  Windows Server 2008 - Server Machine Windows 7 Professional - Client Machine I have a domain. It was setup by the client. The shares on the server are restricted correctly when a user logs on to the domain and uses their workstation, I have a few groups setup to restrict some access but the groups are at their core "Domain Users". The problem I am having is that when a user brings in a laptop with Windows 7 Pro on it, they can type up the name of the server in the "Run Dialog" on the start menu like "\SERVERNAME\" and access all of the shares freely... because they are not logged in to the domain there are no restrictions it seems.I have reviewed the permissions on the folders and they all have to be "Domain Users" and I have removed "Everyone" from the list of people able to see it. Guest access is also disabled...What am I doing wrong? Only group in the list is "Domain Users" isn't a domain user a user that is logged in to the domain? How do I stop non-domain users from seeing the shared folder? I noticed this on Windows Server 2003 too at another time. I assume they both had similar security issues and neither were set up by myself so I am not sure what could have been enabled or specifically deactivated that makes this issue appear.

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >