Search Results

Search found 64721 results on 2589 pages for 'windows usb drive'.

Page 247/2589 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• How to disable hiddev96 in linux (or tell it to ignore a specific device)

  - by Miky D

  I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

  Read the article

• Defragment an Exchange Volume

  - by IceMage

  The Scenario: I use a dedicated volume (RAID volume) to store all of my data for my Exchange 2007 server. Today, out of curiosity, I decided to check up on how fragmented the files on this data volume were. To my surprise, the answer is extremely. So, a three part question: First and Foremost, SHOULD I defragment this volume (after a full backup of course)? Be specific as to why not if I should not, or reasons I absolutely should if I should. Second, about how much time should I allow for during this maintenance period per gigabyte. The drives are all 7200 RPM SATA drives on a Hardware RAID 5 controller (Perc 5i/6i, can't remember), the files are extremely fragmented. (Over 5000 file fragments per gigabyte). Third, is there something wrong here? It seems to me like the drive shouldn't be this fragmented. Could something be configured incorrectly that could be causing this to happen?

  Read the article

• Is there a registry key change that will by-pass the Windows Domain Join Welcome page?

  - by user1256194

  I'm scripting some Windows Server 2008 R2 builds using Power Shell. Some software needs to be installed after the server has joined the domain. Since I want to automate everything, I'm looking to by-pass the domain controllers Welcome page using a registry hack script. I work for a large company and the Active Directory people are unwilling to change group policy. I figure if it's a registry key I can script the change, install the software, replace the key and reboot as the final step. Is there a registry key change that will by-pass the Domain Join Welcome page?

  Read the article

• Restoring factory image of HP Laptop

  - by Ahmed

  I use a HP G62. I am unable to use my recovery disk to restore to factory settings. I had no problems earlier until I created an additional partition which I hear might have changed my hard disk to dynamic. How do I get back to 'normal'? I don't mind formatting the disk. I just want my factory OS back. .............. i get an error message at about 69 percent telling me that the restoration process failed. I'm using the factory image disks i created using the hp recovery manager. I have tried formating the hard drive clean and then restoring woth the cd, it didn't work. I was always able to restore before i created that partition.

  Read the article

• How can I restore my deleted calendar data in Windows Live Mail ?

  - by Cheryl

  I have been using the calendar in Windows Live Mail for months now. When I logged on yesterday, all of the data and appointments I have been inputting for months is gone. The calendar is completely blank. I have performed a system restore with no luck. I have run in safe mode with no luck. I have run a check disk in DOS with no luck. Any other ideas on what I can do to find my calendar info? Could the file be corrupt? I rely on this calendar and all of my info is gone, so any help will be greatly appreciated.

  Read the article

• Is there any way to play Netflix (stream) in Windows Media Player 11?

  - by Not So Sharp

  Googling for a solution yields a ridiculous page on eHow that instructs to insert a DVD from Netflix. But I am not interested in the DVD option. I am only interested in streaming and unfortunately none of my browsers (IE, FF, Chrome) uses the hardware acceleration built into my video card. The only way I can play non-choppy video on my PC is via Windows Media Player, but WMP doesn't list Netflix as one of the supported online stores for some reason. Any idea or trick how stream Netflix on WMP 11 instead of a browser?

  Read the article

• On Windows 7, the last access date is not changed even after reading the file?

  - by Jian Lin

  I have some files on Windows 7, and want to see what time it was that I read it this morning (February 27 morning), but when I right click on the file and choose Properties, I see Accessed: Yesterday, Feb 26, 2011, 2:12:37PM so I open the file to read the content again, and then open up the Properties again, and still the Accessed (date) is the same (Feb 26). Even if I add a column to the folder for "Date Accessed", it still shows Feb 26. But today is Feb 27 and clearly I have "accessed" it... so how can I see the true last accessed date?

  Read the article

• How to Automate .inf PnP Windows 7 Drivers with Wildcard?

  - by Dos_Probie

  I am trying to automate the PnP driver installs for Windows 7 with either of the below batch files via For loop and wildcard for the .inf file. The rundll32 batch reads and echos the correct .inf file but then gives me the "Error Installation failed" and with the pnputil batch it runs without any error put does not install. How can I correct the batch files to install the inf correctly? @echo off&color a&setlocal enabledelayedexpansion cd %~dp0 set PnP=rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 .\*.inf for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ::or set PnP=pnputil -i -a "*.inf" for /f "delims=" %%a in ('dir/b %PnP%') do ( echo == Installing PnP Drivers == "%%a" ping -n 3 localhost 1>nul start "" /wait %PnP%\%%a ) cls echo. * DONE * pause exit

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• I can't uncheck the "read-only" attribute from a folder on a Windows Server 2008 machine.

  - by Andrei

  Hello everybody. I have a folder (C:\temp) on a windows server 2008 R2 installation. Initially it has the Read Only attribute checked, but I want to uncheck it. I am able to uncheck it and it even shows me the loading process (it is showing me that it is going through all the subfolders), but after I press OK and I go back to properties, it still remains checked as Read Only. Hope someone has an idea. Thanks. edit: I tried this one, but it doesn't seem to work: http://support.microsoft.com/kb/256614

  Read the article

• Can't transfer images from a camera connected to usb2 port on a pcmcia adapter

  - by agnul

  I have an old laptop (HP OmniBook vt6200, WinXp pro, sp2) that only has usb1 ports. Transferring pictures from a digital camera is too slow, so I thought of trying one of those pccards carrying usb2 ports (D-Link Dub C2 in my case). Connecting the camera to one of the ports on the pccard, Picasa seems to freeze trying to read the camera contents, until I either disconnect the camera or the pccard. Any idea on what's wrong?

  Read the article

• Hard drives (SATA/ATA) corrupting

  - by JC Denton

  Hello All, 2 years ago I bought relatives a new computer for christmas and installed Ubuntu on it. Ever since then it has been experiencing problems with the hard drives. The hard drive supplied with the machine was a SATA drive. When it appeared it was having problems (files and folders with invalid encoding started appearing) I replaced the SATA drive with the drive of their previous computer. I replaced it (The replacement) later on, the drive being rather old and thus becoming more prone to the risk of failure. The replacement drive is a IDE drive but the same problems started to appear (files and folders showing up in nautilus with invalid encoding). I fear the files and folders that are showing are existing FS entries, starting to corrupt. As it's happening to both the IDE and SATA drive it's unlikely to be the drives themselves or the IDE/SATA controller, I believe. Any ideas as to what could be causing the (assumed) corruption? EDIT: You're right about the paragraphs. They were there in edit mode but I'm still getting to grips with the whitespace format codes. The system is a "Primo Pro" AMD Phenom II X4 Quad Core 920 2.80GHz SILENT DDR2, ordered from overclockers.co.uk and nothing has been added to it except for the replacement of the SATA drive with an AMD drive. It would seem unlikely for a barebones system to be underpowered.

  Read the article

• Windows: Running an AutoIt script to launch a GUI app - on a server, when no one is logged in

  - by mrled

  I want to run an AutoIt script every day at 1:00 AM on a Windows 2003 Server Standard Edition. Since this is a server, obviously there is rarely someone sitting there logged in at the console, so the procedure needs to account for this. The AutoIt script in question launches and sends keypresses to a GUI app, so the process needs to include creating some sort of session for the user running the schedule task. Is there a way to do this? I can't just use scheduled tasks run the AutoIt script when no one is logged in - if I do, it fails to launch at all. I thought that I might be able to create an RDP session and run the scheduled task as that user, inside that session, but I haven't found a way to create an RDP session without launching mstsc.exe -- which is itself a GUI app, and I have the same problem again.

  Read the article

• How can I get the path to a Windows service executable WITHOUT using sc qc?

  - by Jared

  I need to query a windows service for the path to it's executable via the command prompt. I think the way I would do this is:sc qc myServiceName, but when I do that, I get the following error: [SC] QueryServiceConfig FAILED 122: The data area passed to a system call is too small. [SC] GetServiceConfig needs 1094 bytes I think this means that the sc command is sending a data structure to some other library that is too small for the data that needs to be returned. Instead of SC nicely retrying with a larger data structure (1094 bytes) it bombs out and gives me this ugly error message. Thanks Micro$oft. So is there a way to work around this error? I just need the path to the executable, but will parse it out of some other text if needed.

  Read the article

• Windows 7: Screen will power of, or blank and lock, but not both.

  - by Heptite

  For some reason, my Windows 7 (Ultimate, 64bit) laptop will not power off the display and keep it off if I have the screen saver and/or the timed auto-lock enabled. Either the display blanks (and locks) but never powers off, or it powers off for less then a minute, then the back light visibly powers back on and stays on, even though the screen remains blanked until I touch a key or the trackpad. I've tried varying the screen power down time to greater than, less than, and exactly equal to the blank screen/lock time, with no success. Turning the screen saver and the timed auto-lock off does allow the timed display power down in the power settings to work properly. (Note that I am not talking about system sleep or hibernate. I'm talking about when the machine remains running, but only the display should power down.)

  Read the article

• Is there such a concept as "dead thumbnails" in Windows?

  - by Pacerier

  I realised that in disk cleanup (cleanmgr.exe) there is an item "Thumbnails": Windows keeps a copy of all of your picture, video, and document thumbnails so they can be displayed quickly when you open a folder. If you delete these thumbnails, they will be automatically recreated as needed. I was pondering about why there is even an option to delete the thumbnails. Is it true that there will be "dead" thumbnails (for example if I delete a folder that has a thumbnail and the folder is deleted but the thumbnail still exists) so this option is used to clean "dead" thumbnails?

  Read the article

• Prioritize One Network Share Over Another And/Or Cap Network Share Traffic? (Windows Server 2008 R2 Enterprise)

  - by FullTimeCoderPartTimeSysAdmin

  One of my fileservers is a hyper v VM running Windows Server 2008 R2 Enterprise. The NIC in the VM maps to a 1 GB NIC on the host that is dedicated just to this VM. I have two shares on the file server. One is very important and used by a few users. The other is less important but used by many users. The issue I'm having: When a ton of users are accessing the unimportant share, it can choke out requests to the important share. What I'd like to do: I'd like to some prioritize requests for for file on the more important share, or even dedicate a portion of the NIC's bandwidth just to requests for files on that share. Is there any way to do that? Alternately, can I add another NIC and specify that all traffic to one share goes over one NIC and traffic to the other share goes over the other?

  Read the article

• Why won't my Windows 7 KMS key work on my Server 2008 KMS server?

  - by Ryan Bolger

  Our Microsoft volume licensing site was recently updated to include our Windows 7 and Server 2008 R2 KMS keys. We have an existing KMS server running on Server 2008 (not R2). In an attempt to be proactive about supporting the new OSes in our environment, I unregistered the old KMS key with slmgr.vbs and tried registering the new key. The registration failed with Error 0xC004F050. The description for that error was "The Software Licensing Service reported that the product key is invalid." What's wrong? I've checked and double checked that for typos against what is listed on the Volume Licensing website.

  Read the article

• How to disable hiddev96 in linux (or tell it to ignore a specific device)

  - by Miky D

  I'm having problems with a CentOS 5.0 system when using a certain USB device. The problem is that the device advertises itself as a HID device and linux is happy to try to provide support for it: In /ver/log/messages I see a line that reads: hiddev96: USB HID 1.11 Device [KXX USB PRO] on usb-0000:00:1d.0-1 My question comes down to: Is there a way to tell linux to not use hiddev96 for that device in particular? If yes, how? If not, what are my options - can I turn hiddev96 off completely? UPDATE I should probably have been a bit more specific about what is going on. The machine is running Centos 5.0, and on top of it I'm running VMWare workstation with Windows XP - which is where the USB device is actually supposed to operate. All works fine for other USB devices (i.e. VMWare successfully connects the USB device to the guest OS and the OS can use it, but for this particular device VMWare connects it to the guest OS, but the OS can't read/write to it) Every attempt locks up the application that is trying to communicate with the device. I've reason to believe that it is because the device is a HID device and there's some contention between the Linux host and the Windows guest OS in accessing the device. Below is the output from modprobe -l|grep -i hid as requested by @Karolis: # modprobe -l | grep -i hid /lib/modules/2.6.18-53.1.14.el5/kernel/net/bluetooth/hidp/hidp.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetservo.ko /lib/modules/2.6.18-53.1.14.el5/kernel/drivers/usb/misc/phidgetkit.ko And here is the output of lsmod # lsmod Module Size Used by udf 76997 1 vboxdrv 65696 0 autofs4 24517 2 hidp 23105 2 rfcomm 42457 0 l2cap 29633 10 hidp,rfcomm tun 14657 0 vmnet 49980 16 vmblock 20512 3 vmmon 945236 0 sunrpc 144253 1 cpufreq_ondemand 10573 1 video 19269 0 sbs 18533 0 backlight 10049 0 i2c_ec 9025 1 sbs button 10705 0 battery 13637 0 asus_acpi 19289 0 ac 9157 0 ipv6 251393 27 lp 15849 0 snd_hda_intel 24025 2 snd_hda_codec 202689 1 snd_hda_intel snd_seq_dummy 7877 0 snd_seq_oss 32577 0 nvidia 7824032 31 snd_seq_midi_event 11073 1 snd_seq_oss snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 11725 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 42945 0 snd_mixer_oss 19009 1 snd_pcm_oss snd_pcm 72133 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss joydev 13313 0 sg 36061 0 parport_pc 29157 1 snd_timer 24645 2 snd_seq,snd_pcm snd 52421 13 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer ndiswrapper 170384 0 parport 37513 2 lp,parport_pc hci_usb 20317 2 ide_cd 40033 1 tg3 104389 0 i2c_i801 11469 0 bluetooth 53925 8 hidp,rfcomm,l2cap,hci_usb soundcore 11553 1 snd cdrom 36705 1 ide_cd serio_raw 10693 0 snd_page_alloc 14281 2 snd_hda_intel,snd_pcm i2c_core 23745 3 i2c_ec,nvidia,i2c_i801 pcspkr 7105 0 dm_snapshot 20709 0 dm_zero 6209 0 dm_mirror 28741 0 dm_mod 58201 8 dm_snapshot,dm_zero,dm_mirror ahci 23621 4 libata 115833 1 ahci sd_mod 24897 5 scsi_mod 132685 3 sg,libata,sd_mod ext3 123337 3 jbd 56553 1 ext3 ehci_hcd 32973 0 ohci_hcd 23261 0 uhci_hcd 25421 0

  Read the article

• Is there an easy way to read blu-rays on Windows?

  - by ereOn

  Some time ago, I bought my parents a computer dedicated to medias (mostly photographs and movies trough DLNA). My father asked me if he could read blu-ray on it, so I bought a blu-ray reader but I can't find a software to do the playback. I installed PowerDVD (a free version we got with a Blu-Ray) but it seems it now requires a (non-free) upgrade. Even if it were free, I hardly see my parent do the upgrade by themselves as they barely understand how computers work. I thought I would find a free software (something like VLC, but for blu-rays) but so far had no luck. Do you guys have a software to suggest that would solve my issues ? It should run on Windows Vista, shouldn't require an update every monday, or at least a free one. Thank you very much.

  Read the article

• Windows Firewall: How to allow traffic on port 8080?

  - by Chadworthington

  I am trying to configure team Foundation Server so that 1) it is accessible from within my Home Network 2) and then make the Web site access accessible via the Internet I have a problem with point 1: When I access http://192.168.1.106:8080/tfs/web/ locally from 192.168.1.106, it works. When I access the same web site from another PC in my home network, the abive URL works only if I turn of the Firewall on 192.168.1.106. Can someone please tell me specifically how to allow traffic on port 8080 without turning off Windows Firewall? It seems that the exceptions that I specify are intended for listing programs on the box that need to communicate out. Is IIS the program that I need to make the exception? How do I specify that port 8080 traffic should be allowed for web site traffic on this port? I hope to have success with pt. 2 later but I figure (1) should be done first. I expect issues.

  Read the article

• Is there a way to change the default sound volume on startup in windows?

  - by Logan Dam

  I've got a Creative X-Fi Titanium running on Windows 8, which works great, but the drivers have this weird quirk where it sets my headphones volume at 30% every time I boot if I have fast boot enabled. If I disable fast boot then it remembers my previous volume but I don't want to disable fast boot any more (I have an SSD, I want to use it :P) I've asked a similar question here before but as you can see the only "solution" was to disable fast boot, which I don't want to do anymore. Is there a command line tool that will let me set my volume or something similar that I can chuck in a batch file and run on startup, or anything else similar?

  Read the article

• Folder keeps changing back to read-only. What permissions setup causes this in Windows?

  - by farmerbuzz

  I think I'm going crazy. Every time I create a folder it automatically is set to readonly, but I can still then rename the folder or add folders to it. If I attempt to uncheck the readonly flag it becomes checked again when I next open the folder properties. What the heck? Could my IT dept really have set up a policy like this somehow? If so, how? Seems crazy that Windows would even do this -- no errors when I uncheck read-only and hit ok but the change fails.

  Read the article

• Why does Windows 7 need hardware virtualization to run XP mode?

  - by Ken Pespisa

  I have a MacBook Pro and I've run VMware Fusion's unity mode and Parallels' cohesion mode along side the Mac OS X, and both work pretty seamlessly. I figured XP Mode in Windows 7 would be something similar, but I then learned my machine requires hardware virtualization support, which it does not have. My machine is an HP dc7800. That's a dual core 2.2GHz machine with 4GBs of RAM. Certainly it has the horsepower to run a virtual environment alongside the primary OS. I'm wondering: 1) Why Microsoft decided to make hardware virtualization a requirement and 2) What am I missing? Is the experience similar to Parallel's cohesion mode / Fusion's unity mode? Thanks!

  Read the article

• What does this WinImage Error Mean?

  - by Kryten

  Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >