Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 248/627 | < Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >

• Ubuntu 11 and 12 initially fast but later bogs down, CPU pegged

  - by uos??

  I started with Ubuntu 11 a few weeks ago. It's on a DELL M4300 with a OCZ SSD. Default setup, except that I've installed the proprietary NVIDIA graphics and BROADCOM wireless drivers. Dual boot with Windows. If I cold boot into Ubuntu, it is very fast, just like the Windows experience that I'm used to. But SOMETHING happens, and I haven't yet determined what, but the system gets incredibly slow and stays that way. At first I thought it had to do with Adobe Flash because it seemed to be triggered by sites with Flash. But then I removed Flash and the problem remains. I thought it was just an overheating problem, but I've now upgraded to 12.04 which supposedly fixes the overheating problems I've read about. Perhaps the heat situation was brought on by Flash in my early cases? So I installed Jupiter for CPU management, but the thermometer reports a familiar Windows-side temperature of 53 degrees Celsius. Switching Jupiter to lower performance doesn't help. When I check the System Monitor application, sorting by CPU usage, there are no obvious problem processes. However, in the graphs tab, both CPU cores are pegged at 100%! I notice that the slowness seems to be similar to the extremely bad performance I got prior to installing the NVIDIA drivers. I'm not sure if that helps. This is the strangest part to me - although the temperature seems OK, even after rebooting, the system remains slow - starting with GRUB2 which is very noticeably delayed, all the way through to either Ubuntu or Windows! That's right, even the Windows side suffers effects and takes several minutes to complete booting whereas normally (with my SSD) it's ready to use in 15 seconds. The only way to fix it is to shutdown and let the parts cool down. Or maybe it just needs to completely power off and boot rather than a soft reboot, temperature has nothing to do with it? - is that possible? But know that I have never had this problem in Windows, even if Windows gets very hot (135 F) a reboot would be enough time for it to recover. For this reason, I don't think it's a heat thing, but I can't imagine what else could be surviving the reboot. I'm entirely updated - there are no pending updates. I have the Post-Release updates of NVIDIA too, btw. If this sounds CLOSE to something you know about, but one of the details doesn't line up exactly, it might be a mistake in my perception. Are there tests you can suggest to rule something out? Thanks! processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5187.00 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz stepping : 6 microcode : 0x60c cpu MHz : 800.000 cache size : 6144 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 5186.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: (Redundant figures removed. You can view them in the edits if they are still relevant) ps: %CPU PID USER COMMAND 9.4 2399 jason gnome-terminal 6.2 2408 jason bash 17.3 1117 root /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background none 13.7 1667 jason compiz 1.3 1960 jason /usr/lib/unity/unity-panel-service 1.3 1697 jason python /usr/bin/jupiter 0.9 1964 jason /usr/lib/indicator-appmenu/hud-service 0.6 1689 jason nautilus -n 0.4 1458 jason //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session I should highlight specifically that GRUB2 can also be very slow. I don't know the relationship of which scenarios GRUB2 is also slow, but WHEN it is slow, it is slow both before the menu appears and after the selection is made - although for the diagnosis of GRUB2 it is harder for me to tell what the normal speeds should be. With SSD, I would expect that GRUB2 could load instantly, and that the GRUB2 purple would disappear instantly after the selection. The only delay to be expected is the change in graphics modes (though I couldn't guess why that ever requires any noticeable time)

  Read the article

• Simple-Talk development: a quick history lesson

  - by Michael Williamson

  Up until a few months ago, Simple-Talk ran on a pure .NET stack, with IIS as the web server and SQL Server as the database. Unfortunately, the platform for the site hadn’t quite gotten the love and attention it deserved. On the one hand, in the words of our esteemed editor Tony “I’d consider the current platform to be a “success”; it cost $10K, has lasted for 6 years, was finished, end to end in 6 months, and although we moan about it has got us quite a long way.” On the other hand, it was becoming increasingly clear that it needed some serious work. Among other issues, we had authors that wouldn’t blog because our current blogging platform, Community Server, was too painful for them to use. Forgetting about Simple-Talk for a moment, if you ask somebody what blogging platform they’d choose, the odds are they’d say WordPress. Regardless of its technical merits, it’s probably the most popular blogging platform, and it certainly seemed easier to use than Community Server. The issue was that WordPress is normally hosted on a Linux stack running PHP, Apache and MySQL — quite a difference from our Microsoft technology stack. We certainly didn’t want to rewrite the entire site — we just wanted a better blogging platform, with the rest of the existing, legacy site left as is. At a very high level, Simple-Talk’s technical design was originally very straightforward: when your browser sends an HTTP request to Simple-Talk, IIS (the web server) takes the request, does some work, and sends back a response. In order to keep the legacy site running, except with WordPress running the blogs, a different design is called for. We now use nginx as a reverse-proxy, which can then delegate requests to the appropriate application: So, when your browser sends a request to Simple-Talk, nginx takes that request and checks which part of the site you’re trying to access. Most of the time, it just passes the request along to IIS, which can then respond in much the same way it always has. However, if your request is for the blogs, then nginx delegates the request to WordPress. Unfortunately, as simple as that diagram looks, it hides an awful lot of complexity. In particular, the legacy site running on IIS was made up of four .NET applications. I’ve already mentioned one of these applications, Community Server, which handled the old blogs as well as managing membership and the forums. We have a couple of other applications to manage both our newsletters and our articles, and our own custom application to do some of the rendering on the site, such as the front page and the articles. When I say that it was made up of four .NET applications, this might conjure up an image in your mind of how they fit together: You might imagine four .NET applications, each with their own database, communicating over well-defined APIs. Sadly, reality was a little disappointing: We had four .NET applications that all ran on the same database. Worse still, there were many queries that happily joined across tables from multiple applications, meaning that each application was heavily dependent on the exact data schema that each other application used. Add to this that many of the queries were at least dozens of lines long, and practically identical to other queries except in a few key spots, and we can see that attempting to replace one component of the system would be more than a little tricky. However, the problems with the old system do give us a good place to start thinking about desirable qualities from any changes to the platform. Specifically: Maintainability — the tight coupling between each .NET application made it difficult to update any one application without also having to make changes elsewhere Replaceability — the tight coupling also meant that replacing one component wouldn’t be straightforward, especially if it wasn’t on a similar Microsoft stack. We’d like to be able to replace different parts without having to modify the existing codebase extensively Reusability — we’d like to be able to combine the different pieces of the system in different ways for different sites Repeatable deployments — rather than having to deploy the site manually with a long list of instructions, we should be able to deploy the entire site with a single command, allowing you to create a new instance of the site easily whether on production, staging servers, test servers or your own local machine Testability — if we can deploy the site with a single command, and each part of the site is no longer dependent on the specifics of how every other part of the site works, we can begin to run automated tests against the site, and against individual parts, both to prevent regressions and to do a little test-driven development In the next part, I’ll describe the high-level architecture we now have that hopefully brings us a little closer to these five traits.

  Read the article

• Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

  - by terje

  Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled.  To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that.   However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code.  If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks.   I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post.  When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate.  Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset  (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check.   Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds.   Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build   In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”.     The ruleset checks The following list is the essential and critical memory checks.  CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No  http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else  http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No  http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No  http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description  http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level  http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level  http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources  http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No  http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash   The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set.   ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx   Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones.  All three rulesets can be found in the  zip archive  “Inmeta.Memorycheck” downloadable from here.   Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN :  Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

  Read the article

• Cumulative Feature Overview Tool

  - by Matthew Haavisto

  The popular Cumulative Feature Overview Tool now has a new column that indicates if functionality was introduced in a bundle or maintenance pack (see example).   The CFO tool helps you plan your upgrades by providing concise descriptions of new and enhanced solutions and functionality that have become available between your starting and target releases. You simply identify the products you own, your existing release, and your target implementation release. With a single click, the tool quickly produces a customized set of high-level, concise descriptions of features developed between your starting and target releases. The CFO is available for PeopleTools as well as PeopleSoft applications.

  Read the article

• Verizon Wireless Supports its Mission-Critical Employee Portal with MySQL

  - by Bertrand Matthelié

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Cambria","serif"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Verizon Wireless, the #1 mobile carrier in the United States, operates the nation’s largest 3G and 4G LTE network, with the most subscribers (109 millions) and the highest revenue ($70.2 Billion in 2011). Verizon Wireless built the first wide-area wireless broadband network and delivered the first wireless consumer 3G multimedia service in the US, and offers global voice and data services in more than 200 destinations around the world. To support 4.2 million daily wireless transactions and 493,000 calls and emails transactions produced by 94.2 million retail customers, Verizon Wireless employs over 78,000 employees with area headquarters across the United States. The Business Challenge Seeing the stupendous rise in social media, video streaming, live broadcasting…etc which redefined the scope of technology, Verizon Wireless, as a technology savvy company, wanted to provide a platform to its employees where they could network socially, view and host microsites, stream live videos, blog and provide the latest news. The IT team at Verizon Wireless had abundant experience with various technology platforms to support the huge number of applications in the company. However, open-source products weren’t yet widely used in the organization and the team had the ambition to adopt such technologies and see if the architecture could meet Verizon Wireless’ rigid requirements. After evaluating a few solutions, the IT team decided to use the LAMP stack for Vzweb, its mission-critical, 24x7 employee portal, with Drupal as the front end and MySQL on Linux as the backend, and for a few other internal websites also on MySQL. The MySQL Solution Verizon Wireless started to support its employee portal, Vzweb, its online streaming website, Vztube, and internal wiki pages, Vzwiki, with MySQL 5.1 in 2010. Vzweb is the main internal communication channel for Verizon Wireless, while Vztube hosts important company-wide webcasts regularly for executive-level announcements, so both channels have to be live and accessible all the time for its 78,000 employees across the United States. However during the initial deployment of the MySQL based Intranet, the application experienced performance issues. High connection spikes occurred causing slow user response time, and the IT team applied workarounds to continue the service. A number of key performance indexes (KPI) for the infrastructure were identified and the operational framework redesigned to support a more robust website and conform to the 99.985% uptime SLA (Service-Level Agreement). The MySQL DBA team made a series of upgrades in MySQL: Step 1: Moved from MyISAM to InnoDB storage engine in 2010 Step 2: Upgraded to the latest MySQL 5.1.54 release in 2010 Step 3: Upgraded from MySQL 5.1 to the latest GA release MySQL 5.5 in 2011, and leveraging MySQL Thread Pool as part of MySQL Enterprise Edition to scale better After making those changes, the team saw a much better response time during high concurrency use cases, and achieved an amazing performance improvement of 1400%! In January 2011, Verizon CEO, Ivan Seidenberg, announced the iPhone launch during the opening keynote at Consumer Electronic Show (CES) in Las Vegas, and that presentation was streamed live to its 78,000 employees. The event was broadcasted flawlessly with MySQL as the database. Later in 2011, Hurricane Irene attacked the East Coast of United States and caused major life and financial damages. During the hurricane, the team directed more traffic to its west coast data center to avoid potential infrastructure damage in the East Coast. Such transition was executed smoothly and even though the geographical distance became longer for the East Coast users, there was no impact in the performance of Vzweb and Vztube, and the SLA goal was achieved. “MySQL is the key component of Verizon Wireless’ mission-critical employee portal application,” said Shivinder Singh, senior DBA at Verizon Wireless. “We achieved 1400% performance improvement by moving from the MyISAM storage engine to InnoDB, upgrading to the latest GA release MySQL 5.5, and using the MySQL Thread Pool to support high concurrent user connections. MySQL has become part of our IT infrastructure, on which potentially more future applications will be built.” To learn more about MySQL Enterprise Edition, Get our Product Guide.

  Read the article

• Defining the Features we would like to see

  - by Patrick Liekhus

  OK, now that we have a very rough idea of what we are building, let’s get a list of the top features that this application needs to allow us to do.  In this next list we are not prioritizing them yet, just getting on paper the high level backlog of items that this system must do. Add a new task to my work queue Change the status of the task Print a hard copy of the task list by day for my records Log a phone conversation A manager should be able to assign tasks to another user How do we login? Change the Covey roles per user Manage the statuses used Manage the Covey quadrants Can we make this available on the following user interfaces? Windows Desktop Web Browser Sliverlight (WPF) Excel Add-in Outlook Add-in Android Devices iPhone Devices Windows Mobile Devices Blackberry Devices While this looks like a simple spread sheet, it can get pretty complex and busy quickly.  Next time we will work on making this into a Product Backlog and prioritizing the features we would like to see.

  Read the article

• SLK opens SCORM package as a ZIP file

  - by Cherie Riesberg

  Symptom: After installing SharePoint Learning Kit successfully, (http://www.codeplex.com/SLK), everything works except that the SCORM package (a ZIP extension) is opening as a ZIP file instead of a course. You get the normal ZIP message "Do you want to open or save this file?" Problem: The package is zipped at the upper folder level and does not create a manifest that allows SharePoint to recognize it as a SCORM file instead of a ZIP file. Solution: Add the contents of the course to the ZIP, not the outer (uppermost) folder.  This creates a ZIP file that SharePoint can recognize as a SCORM package.

  Read the article

• Azure, don't give me multiple VMs, give me one elastic VM

  - by FransBouma

  Yesterday, Microsoft revealed new major features for Windows Azure (see ScottGu's post). It all looks shiny and great, but after reading most of the material describing the new features, I still find the overall idea behind all of it flawed: why should I care on how much VMs my web app runs? Isn't that a problem to solve for the Windows Azure engineers / software? And what if I need the file system, why can't I simply get a virtual filesystem ? To illustrate my point, let's use a real example: a product website with a customer system/database and next to it a support site with accompanying database. Both are written in .NET, using ASP.NET and use a SQL Server database each. The product website offers files to download by customers, very simple. You have a couple of options to host these websites: Buy a server, place it in a rack at an ISP and run the sites on that server Use 'shared hosting' with an ISP, which means your sites' appdomains are running on the same machine, as well as the files stored, and the databases are hosted in the same server as the other shared databases. Hire a VM, install your OS of choice at an ISP, and host the sites on that VM, basically the same as the first option, except you don't have a physical server At some cloud-vendor, either host the sites 'shared' or in a VM. See above. With all of those options, scalability is a problem, even the cloud-based ones, though not due to the same reasons: The physical server solution has the obvious problem that if you need more power, you need to buy a bigger server or more servers which requires you to add replication and other overhead Shared hosting solutions are almost always capped on memory usage / traffic and database size: if your sites get too big, you have to move out of the shared hosting environment and start over with one of the other solutions The VM solution, be it a VM at an ISP or 'in the cloud' at e.g. Windows Azure or Amazon, in theory allows scaling out by simply instantiating more VMs, however that too introduces the same overhead problems as with the physical servers: suddenly more than 1 instance runs your sites. If a cloud vendor offers its services in the form of VMs, you won't gain much over having a VM at some ISP: the main problems you have to work around are still there: when you spin up more than one VM, your application must be completely stateless at any moment, including the DB sub system, because what's in memory in instance 1 might not be in memory in instance 2. This might sounds trivial but it's not. A lot of the websites out there started rather small: they were perfectly runnable on a single machine with normal memory and CPU power. After all, you don't need a big machine to run a website with even thousands of users a day. Moving these sites to a multi-VM environment will cause a problem: all the in-memory state they use, all the multi-page transitions they use while keeping state across the transition, they can't do that anymore like they did that on a single machine: state is something of the past, you have to store every byte of state in either a DB or in a viewstate or in a cookie somewhere so with the next request, all state information is available through the request, as nothing is kept in-memory. Our example uses a bunch of files in a file system. Using multiple VMs will require that these files move to a cloud storage system which is mounted in each VM so we don't have to store the files on each VM. This might require different file paths, but this change should be minor. What's perhaps less minor is the maintenance procedure in place on the new type of cloud storage used: instead of ftp-ing into a VM, you might have to update the files using different ways / tools. All in all this makes moving an existing website which was written for an environment that's based around a VM (namely .NET with its CLR) overly cumbersome and problematic: it forces you to refactor your website system to be able to be used 'in the cloud', which is caused by the limited way how e.g. Windows Azure offers its cloud services: in blocks of VMs. Offer a scalable, flexible VM which extends with my needs Instead, cloud vendors should offer simply one VM to me. On that VM I run the websites, store my DB and my files. As it's a virtual machine, how this machine is actually ran on physical hardware (e.g. partitioned), I don't care, as that's the problem for the cloud vendor to solve. If I need more resources, e.g. I have more traffic to my server, way more visitors per day, the VM stretches, like I bought a bigger box. This frees me from the problem which comes with multiple VMs: I don't have any refactoring to do at all: I can simply build my website as if it runs on my local hardware server, upload it to the VM offered by the cloud vendor, install it on the VM and I'm done. "But that might require changes to windows!" Yes, but Microsoft is Windows. Windows Azure is their service, they can make whatever change to what they offer to make it look like it's windows. Yet, they're stuck, like Amazon, in thinking in VMs, which forces developers to 'think ahead' and gamble whether they would need to migrate to a cloud with multiple VMs in the future or not. Which comes down to: gamble whether they should invest time in code / architecture which they might never need. (YAGNI anyone?) So the VM we're talking about, is that a low-level VM which runs a guest OS, or is that VM a different kind of VM? The flexible VM: .NET's CLR ? My example websites are ASP.NET based, which means they run inside a .NET appdomain, on the .NET CLR, which is a VM. The only physical OS resource the sites need is the file system, however this too is accessed through .NET. In short: all the websites see is what .NET allows the websites to see, the world as the websites know it is what .NET shows them and lets them access. How the .NET appdomain is run physically, that's the concern of .NET, not mine. This begs the question why Windows Azure doesn't offer virtual appdomains? Or better: .NET environments which look like one machine but could be physically multiple machines. In such an environment, no change has to be made to the websites to migrate them from a local machine or own server to the cloud to get proper scaling: the .NET VM will simply scale with the need: more memory needed, more CPU power needed, it stretches. What it offers to the application running inside the appdomain is simply increasing, but not fragmented: all resources are available to the application: this means that the problem of how to scale is back to where it should be: with the cloud vendor. "Yeah, great, but what about the databases?" The .NET application communicates with the database server through a .NET ADO.NET provider. Where the database is located is not a problem of the appdomain: the ADO.NET provider has to solve that. I.o.w.: we can host the databases in an environment which offers itself as a single resource and is accessible through one connection string without replication overhead on the outside, and use that environment inside the .NET VM as if it was a single DB. But what about memory replication and other problems? This environment isn't simple, at least not for the cloud vendor. But it is simple for the customer who wants to run his sites in that cloud: no work needed. No refactoring needed of existing code. Upload it, run it. Perhaps I'm dreaming and what I described above isn't possible. Yet, I think if cloud vendors don't move into that direction, what they're offering isn't interesting: it doesn't solve a problem at all, it simply offers a way to instantiate more VMs with the guest OS of choice at the cost of me needing to refactor my website code so it can run in the straight jacket form factor dictated by the cloud vendor. Let's not kid ourselves here: most of us developers will never build a website which needs a truck load of VMs to run it: almost all websites created by developers can run on just a few VMs at most. Yet, the most expensive change is right at the start: moving from one to two VMs. As soon as you have refactored your website code to run across multiple VMs, adding another one is just as easy as clicking a mouse button. But that first step, that's the problem here and as it's right there at the beginning of scaling the website, it's particularly strange that cloud vendors refuse to solve that problem and leave it to the developers to solve that. Which makes migrating 'to the cloud' particularly expensive.

  Read the article

• Ryan Weber On KCNext | #AJIReport

  - by Jeff Julian

  We sit down with Ryan Weber of KCNext in our office to talk about the Kansas City market for technology. The Technology Council of Greater Kansas City is committed to growing the existing base of technology firms, recruiting and attracting technology companies, aggregating and promoting our regional IT assets and providing peer interaction and industry news. During this show we talk about why KCNext is great for Kansas City. They offer some great networking and educational events, but also focus on connecting companies together to help build relationships on a business level. Make sure you visit their website to see what events are coming up and link up with them on Twitter to stay on top of news from the KC technology community. Listen to the Show Site: http://www.kcnext.com/ Twitter: @KCNext LinkedIn: KCNext - The Technology Council of Greater Kansas City

  Read the article

• Integrating Code Metrics in TFS 2010 Build

  - by Jakob Ehn

  The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications.  This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

  Read the article

• Analysing and measuring the performance of a .NET application (survey results)

  - by Laila

  Back in December last year, I asked myself: could it be that .NET developers think that you need three days and a PhD to do performance profiling on their code? What if developers are shunning profilers because they perceive them as too complex to use? If so, then what method do they use to measure and analyse the performance of their .NET applications? Do they even care about performance? So, a few weeks ago, I decided to get a 1-minute survey up and running in the hopes that some good, hard data would clear the matter up once and for all. I posted the survey on Simple Talk and got help from a few people to promote it. The survey consisted of 3 simple questions: Amazingly, 533 developers took the time to respond - which means I had enough data to get representative results! So before I go any further, I would like to thank all of you who contributed, because I now have some pretty good answers to the troubling questions I was asking myself. To thank you properly, I thought I would share some of the results with you. First of all, application performance is indeed important to most of you. In fact, performance is an intrinsic part of the development cycle for a good 40% of you, which is much higher than I had anticipated, I have to admit. (I know, "Have a little faith Laila!") When asked what tool you use to measure and analyse application performance, I found that nearly half of the respondents use logging statements, a third use performance counters, and 70% of respondents use a profiler of some sort (a 3rd party performance profilers, the CLR profiler or the Visual Studio profiler). The importance attributed to logging statements did surprise me a little. I am still not sure why somebody would go to the trouble of manually instrumenting code in order to measure its performance, instead of just using a profiler. I personally find the process of annotating code, calculating times from log files, and relating it all back to your source terrifyingly laborious. Not to mention that you then need to remember to turn it all off later! Even when you have logging in place throughout all your code anyway, you still have a fair amount of potentially error-prone calculation to sift through the results; in addition, you'll only get method-level rather than line-level timings, and you won't get timings from any framework or library methods you don't have source for. To top it all, we all know that bottlenecks are rarely where you would expect them to be, so you could be wasting time looking for a performance problem in the wrong place. On the other hand, profilers do all the work for you: they automatically collect the CPU and wall-clock timings, and present the results from method timing all the way down to individual lines of code. Maybe I'm missing a trick. I would love to know about the types of scenarios where you actively prefer to use logging statements. Finally, while a third of the respondents didn't have a strong opinion about code performance profilers, those who had an opinion thought that they were mainly complex to use and time consuming. Three respondents in particular summarised this perfectly: "sometimes, they are rather complex to use, adding an additional time-sink to the process of trying to resolve the existing problem". "they are simple to use, but the results are hard to understand" "Complex to find the more advanced things, easy to find some low hanging fruit". These results confirmed my suspicions: Profilers are seen to be designed for more advanced users who can use them effectively and make sense of the results. I found yet more interesting information when I started comparing samples of "developers for whom performance is an important part of the dev cycle", with those "to whom performance is only looked at in times of crisis", and "developers to whom performance is not important, as long as the app works". See the three graphs below. Sample of developers to whom performance is an important part of the dev cycle: Sample of developers to whom performance is important only in times of crisis: Sample of developers to whom performance is not important, as long as the app works: As you can see, there is a strong correlation between the usage of a profiler and the importance attributed to performance: indeed, the more important performance is to a development team, the more likely they are to use a profiler. In addition, developers to whom performance is an important part of the dev cycle have a higher tendency to use a much wider range of methods for performance measurement and analysis. And, unsurprisingly, the less important performance is, the less varied the methods of measurement are. So all in all, to come back to my random questions: .NET developers do care about performance. Those who care the most use a wider range of performance measurement methods than those who care less. But overall, logging statements, performance counters and third party performance profilers are the performance measurement methods of choice for most developers. Finally, although most of you find code profilers complex to use, those of you who care the most about performance tend to use profilers more than those of you to whom performance is not so important.

  Read the article

• DLL-s needed to run ASP.NET MVC 3 RC on Windows Azure

  - by DigiMortal

  In this weekend I made one of my new apps run on Windows Azure. I am building this application using ASP.NET MVC 3 RC and Razor view engine. In this posting I will list DLL-s you need to have as local copies to get ASP.NET MVC 3 RC run on Windows Azure web role. Besides assemblies that are already references you may need to add references to some more assemblies. List of assemblies is here: Microsoft.Web.Infrastructure System.Web.Helpers System.Web.Mvc System.Web.Razor System.Web.WebPages System.Web.WebPages.Razor WebMatrix.Data You can find Razor and ASP.NET Web Pages related assemblies from folder: C:\Program Files\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\Assemblies\ NB! If your project is using dynamically loaded assemblies that are not referenced from any of your project make sure you are including them as project items that are located in bin folder. This way these DLL-s are also put to deployment package and you don’t have to create code level references to them.

  Read the article

• Oracle Linux and Oracle VM pricing guide

  - by wcoekaer

  A few days ago someone showed me a pricing guide from a Linux vendor and I was a bit surprised at the complexity of it. Especially when you look at larger servers (4 or 8 sockets) and when adding virtual machine use into the mix. I think we have a very compelling and simple pricing model for both Oracle Linux and Oracle VM. Let me see if I can explain it in 1 page, not 10 pages. This pricing information is publicly available on the Oracle store, I am using the current public list prices. Also keep in mind that this is for customers using non-oracle x86 servers. When a customer purchases an Oracle x86 server, the annual systems support includes full use (all you can eat) of Oracle Linux, Oracle VM and Oracle Solaris (no matter how many VMs you run on that server, in case you deploy guests on a hypervisor). This support level is the equivalent of premier support in the list below. Let's start with Oracle VM (x86) : Oracle VM support subscriptions are per physical server on which you deploy the Oracle VM Server product. (1) Oracle VM Premier Limited - 1- or 2 socket server : $599 per server per year (2) Oracle VM Premier - more than 2 socket server (4, or 8 or whatever more) : $1199 per server per year The above includes the use of Oracle VM Manager and Oracle Enterprise Manager Cloud Control's Virtualization management pack (including self service cloud portal, etc..) 24x7 support, access to bugfixes, updates and new releases. It also includes all options, live migrate, dynamic resource scheduling, high availability, dynamic power management, etc If you want to play with the product, or even use the product without access to support services, the product is freely downloadable from edelivery. Next, Oracle Linux : Oracle Linux support subscriptions are per physical server. If you plan to run Oracle Linux as a guest on Oracle VM, VMWare or Hyper-v, you only have to pay for a single subscription per system, we do not charge per guest or per number of guests. In other words, you can run any number of Oracle Linux guests per physical server and count it as just a single subscription. (1) Oracle Linux Network Support - any number of sockets per server : $119 per server per year Network support does not offer support services. It provides access to the Unbreakable Linux Network and also offers full indemnification for Oracle Linux. (2) Oracle Linux Basic Limited Support - 1- or 2 socket servers : $499 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem. (3) Oracle Linux Basic Support - more than 2 socket server (4, or 8 or more) : $1199 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management. It includes ocfs2 as a clustered filesystem (4) Oracle Linux Premier Limited Support - 1- or 2 socket servers : $1399 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (5) Oracle Linux Premier Support - more than 2 socket servers : $2299 per server per year This subscription provides 24x7 support services, access to the Unbreakable Linux Network and the Oracle Support portal, indemnification, use of Oracle Clusterware for Linux HA and use of Oracle Enterprise Manager Cloud control for Linux OS management, XFS filesystem support. It also offers Oracle Lifetime support, backporting of patches for critical customers in previous versions of package and ksplice zero-downtime updates. (6) Freely available Oracle Linux - any number of sockets You can freely download Oracle Linux, install it on any number of servers and use it for any reason, without support, without right to use of these extra features like Oracle Clusterware or ksplice, without indemnification. However, you do have full access to all errata as well. Need support? then use options (1)..(5) So that's it. Count number of 2 socket boxes, more than 2 socket boxes, decide on basic or premier support level and you are done. You don't have to worry about different levels based on how many virtual instance you deploy or want to deploy. A very simple menu of choices. We offer, inclusive, Linux OS clusterware, Linux OS Management, provisioning and monitoring, cluster filesystem (ocfs), high performance filesystem (xfs), dtrace, ksplice, ofed (infiniband stack for high performance networking). No separate add-on menus. NOTE : socket/cpu can have any number of cores. So whether you have a 4,6,8,10 or 12 core CPU doesn't matter, we count the number of physical CPUs.

  Read the article

• JavaOne pictures and Community Commentary on JCP Awards

  - by heathervc

  We posted some pictures from JCP related events at JavaOne 2012 on the JCP Facebook page today.  The 2012 JCP Program Award winners and some of the nominees responded to the community recognition of their achievements during some of the JCP events last week.     “Our job on the EC is to balance the need of innovation – so we don’t standardize too early, or too late. We try to find that sweet spot that makes innovation and standardization work together, and not against each other.”- Ben Evans, CEO of jClarity and Executive Committee (EC) representative of the London Java Community, 2012 JCP Member/Participant of the Year Winner“SouJava has been evangelizing the Java platform, promoting the Java ecosystem in Brazil, and contributing to JSRs for several years. It’s very gratifying to have our work recognized, on behalf of many developers and Java User Groups around the world. This really is the work of a large group of people, represented by the few that can be here tonight.”- Michael Santos, representative of SouJava, 2012 JCP Member/Participant of the Year Winner "In the last years Credit Suisse has contributed to the development of Java EE specifications through participation in many customer advisory boards, through statements of requirements for extensions to the core Java related products in use, and active participation in JSRs. Winning the JCP Outstanding Spec Lead Award 2012 is very encouraging for our engagement and also demonstrates the level of expertise and commitment to drive the evolution of Java. Victor Grazi is happy and honored to receive this award." - Susanne Cech Previtali, Executive Committee (EC) representative of Credit Suisse, accepting award for 2012 JCP Outstanding Spec Lead Winner "Managing a JSR is difficult. There are so many decisions to be made and so many good and varied opinions, you never really know if you have decided correctly. The key to success is transparency and collaboration. I am truly humbled by receiving this award, there are so many other active JSRs.” Victor added that going forward in the JCP EC, they would like to simplify and open the process of participation – being addressed in the JCP.Next initiative of the JCP EC. "We would also like to encourage the engagement of universities, professors and students – as an important part of the Java community. While innovation is the lifeblood of our community and industry, without strong standards and compatibility requirements, we all end up in a maze of technology where everything is slightly different and doesn’t quite work with everything else." Victo Grazi, Executive Committee (EC) representative of Credit Suisse, 2012 JCP Outstanding Spec Lead Winner“I am very pleased, of course, to accept this award, but the credit really should go to all of those who have participated in the work of the JCP, while pushing for changes in the way it operates.  JCP.Next represents three JSRs. The first two are done, but the final step, JSR 358, is the complicated one, and it will bring in the lawyers. Just to give you an idea of what we’re dealing with, it affects licensing, intellectual property, patents, implementations not based on the Reference Implementation (RI), the role of the RI, compatibility policy, possible changes to the Technical Compatibility Kit (TCK), transparency, where do individuals fit in, open source, and more.”- Patrick Curran, JCP Chair, Spec Lead on JCP.Next JSRs (JSR 348, JSR 355 and JSR 358), 2012 JCP Most Significant JSR Winner“I’m especially glad to see the JCP community recognize JCP.Next for its importance. The governance work it represents is KEY to moving the Java platform forward and the success of the technology.”- John Rizzo, Executive Committee (EC) representative of Aplix Corporation, JSR Expert Group Member “I am deeply honored to be nominated. I had the privilege to receive two awards on behalf of Expert Groups and Spec Leads two years ago. But this time, I am nominated personally, which values my own contribution to the JCP, and of course, participation in JSRs and the EC work. I’m a fan of Agile Principles and Values Working. Being an Agile Coach and Consultant, I use it for some of the biggest EC Member companies and projects. It fuels my ability to help the JCP become more agile, lean and transparent as part of the JCP.Next effort.” - Werner Keil, Individual Executive Committee (EC) Member, a 2012 JCP Member/Participant of the Year Nominee, JSR Expert Group Member“The JCP ever has been some kind of institution for me,” Markus said. “If in technical doubt, I go there, look for the specifications of the implementation I work with at the moment and verify what I had observed. Since the beginning of my Java journey more than 12 years back now, I always had a strong relationship with the JCP. Shaping the future of a technology by joining the JCP – giving feedback and contributing to the road ahead through individual JSRs – that brings you to a whole new level.”Calling himself, “the new kid on the block,” he explained that for years he was afraid to join the JCP and contribute. But in reality, “Every single one of the big names I meet from the different Expert Groups is a nice person. People you can actually work with,” he says. “And nobody blames you for things you don't know. As long as you are committed and bring what is worth the most: passion, experiences and the desire to make a difference.” - Markus Eisele, a 2012 JCP Member of the Year Nominee, JSR Expert Group MemberCongratulations again to all of the nominees and winners of the JCP Program Awards.  Next year, we will add another award for the group of JUG members (not an entire JUG) that makes the best contribution to the Adopt-a-JSR program.  Let us know if you have other suggestions or improvements.

  Read the article

• MIX 2010 Covert Operations Day 2 Silverlight + Windows 7 Phone

  - by GeekAgilistMercenary

  Left the Circus Circus and headed to the geek circus at Mandalay Bay.  Got in, got some breakfast, met a few more people and headed to the keynote. Upon arriving the crew I was hanging with at the event; Erik Mork, Beth Murray, and Brian Henderson and I were entertained with several other thousand geeks by the wicked yo-yoing. The first video demo of something was of Bing Maps and various aspects of Microsoft Research integrated together.  Namely the pictures, put in place, on real 3d element maps of various environments. Silverlight Scott Guthrie, as one would guess, kicked off the keynote.  His first point was that user experience has become a priority at Microsoft.  This can be seen by any observant soul with the release and push of Expression, Silverlight, and the other tools.  This is even more apparent when one takes note of Microsoft bringing in people that can actually do good design and putting them at the forefront. The next thing Scott brought up was a few key points about Silverlight.  Currently Silverlight is a little over 2 years old and has achieved a pretty solid 60% penetration.  Silverlight has all sorts of capabilities that have been developed and are now provided as open source including;  ad injection, smoothing, playback editing, and more.  Another thing he showed, which really struck me as awesome being in the analytics space, was the Olympics and a quick glimpse of the ad statistics, viewer experience, video playback performance, audience trends, and overall viewer participation.  All of it rendered in Silverlight in beautiful detail. The key piece of Scott's various points were all punctuated with the fact that all of this code is available as open source.  Not only is Microsoft really delving into this design element of things, they're getting involved in the right ways. One of the last points I'll bring up about Silverlight 4 is the ability to have HD video on a monitor, and an entirely different activity being done on the other monitor, effectively making Silverlight the only RIA framework that supports multi-monitor support.  Overall, Silverlight is continuing to impress – providing superior capabilities tit-for-tat with the competition. Windows 7 Phone The Windows 7 Phone has 3 primary buttons (yes, more than the iPhone, don't let your mind explode!!).  Start, Search, and Back control all of the needed functionality of the phone.  At the same time, of course, there is the multi-touch, touch, and other interactive abilities of the interface.  The intent, once start is pressed is to have all the information that a phone owner wants displayed immediately.  Avoiding the scrolling through pages of apps or rolling a ball to get through multitudes of other non-interactive phone interfaces.  The Windows 7 Phone simply has the data right in front of you, basically a phone dashboard.  From there it is easy to dive into the interactive areas of the phone. Each area of the interface of the phone is broken into hubs.  These hubs include applications, data, and other things based on a relative basis.  This basis being determined by the user.  These applications interact on many other levels, and form a kind of relationship between each other adding more and more meta-data to the phone user, their interactions between the applications, and of course the social element of their interactions on the phone.  This makes this phone a practical must have for a marketer involved in social media.  The level of wired together interaction is massive, and of course, if you've seen Office Outlook 2010 you know that the power that is pulled into the phone by being tied to Outlook is massive. Joe Belfiore also showed several UI & specifically UX elements of the phone interface that allows paging to be instinctual by simple clipped items, flipping page to page, and other excellent user experience advances for phone devices.  Belfiore's also showed how his people hub had a massive list of people, with pictures, all from various different social networks and other associated relations.  The rendering, speed, and viewing of these people's, their pictures, their social network information, and other characteristics was smooth and in some situations unbelievably rendered.  This demo showed some of the great power of the beta phone, which isn't even as powerful as the planned end device. Joe finished up by jumping into the music, videos, and other media with the Zune Component of the Windows 7 Mobile Phone.  This was all good stuff, but I'll get to what really sold me on the media element in a moment. When Joe was done, Scott Guthrie stepped back up to walk through building a Windows 7 Mobile Phone.  This is were I have to give serious props.  He built this application, in Visual Studio 2010, in front of 2000+ people.  That was cool, but what really was amazing that he build the application in about 2 minutes.  The IDE, side by side design that is standard in Visual Studio is light years ahead of x-Code or any of the iPhone IDEs.  The Windows 7 Mobile System, if it can get market penetration, poses a technologically superior development and phone platform over anything on the market right now.  The biggest problem with the phone, is it just isn't available yet.  I personally can't wait for a chance to build some apps for the new Windows Phone. Netflix, I May Start Up an Account Again! When I get my Windows 7 Phone device, I am absolutely getting a Netflix account again.  The Vertigo crew, as I wrote on Twitter "#MIX10 Props @seesharp on @netflix demo", displayed an application on the phone for Netflix that actually ran HD Video of Rescue Me (with Dennis Leary).  The video played back smooth as it would on a dedicated computer, I was instantly sold.  So this didn't actually sell me on the phone, because I'm already sold, but it did sell me whole heartedly on the media capabilities of the pending phone. Anyway, I try not to do this but I may double post today.  Lunch is over and I'm off to another session very near and dear to the heart of my occupation, Analytics Tracking.  Stay tuned and I should have that post up by the end of the day. Original Post – Check out my other blog for even more technical ramblings and reads.

  Read the article

• Mark Hurd on Oracle's Strategy to Be the Best

  - by Tuula Fai

  Mark Hurd, President of Oracle, energized a packed audience this Monday morning at OpenWorld with his keynote outlining Oracle’s four-pillar strategy: Be the leader at every level of the technology stack—applications, middleware, database, operating system, virtual machine, servers, and storage Vertically integrate these levels into differentiated solutions Offer Fusion, the next generation of applications, which are modular and can run in the cloud, on-premise, or both (hybrid) Deliver this technology portfolio through industry lenses to help Oracle customers solve their problems while innovating and becoming more efficient. Hurd’s message resonated throughout Monday’s Customer Experience (CX) sessions as we learned about Oracle’s investment in integrating its best-of-breed CX solutions to deliver an end-to-end suite that addresses every part of the customer lifecycle. For example, in the area of customer service, Oracle is developing enhancements to help contact center agents: Better understand customer needs through social listening tools that are integrated with knowledge management Empower themselves with internal collaboration and mobility tools Adapt to customer needs by engaging them through chat during a service or commerce interaction so they can deliver a great customer experience while transforming from a cost- into a profit center.

  Read the article

• New Whitepaper: Oracle E-Business Suite on Exadata

  - by Steven Chan

  Our Maximum Availability Architecture (MAA) team has quietly been amassing a formidable set of whitepapers about the Oracle Exadata Database Machine.  They're available here:MAA Best Practices - Exadata Database MachineIf you're one of the lucky ones with access to this hardware platform, you'll be pleased to hear that the MAA team has just published a new whitepaper with best practices for EBS environments:Oracle E-Business Suite on ExadataThis whitepaper covers the following topics:Getting to Exadata -- a high level overview of fresh installation on, and migration to, Exadata Database Machine with pointers to more detailed documentation High Availability and Disaster Recovery -- an overview of our MAA best practices with pointers to our detailed MAA Best Practices documentation Performance and Scalability -- best practices for running Oracle E-Business Suite on Exadata Database Machine based on our internal testing

  Read the article

• How to setup Thinkpad features on Thinkpad T500

  - by gijoemike

  I have a IBM-Lenovo Thinkpad T500. I was previously a exclusive windows user, but recently installed ubuntu and loving it because of speed and interface. The only thing is that I don't get some features that I came to enjoy in windows. I need help setting these up: Hard-drive protection - active protection software that pauses drive when there is movement My printer doesn't work (can't find the driver for this one): canon Ip2600 A way to change which graphics chip to use while in OS. I have both the integrated and non integrated (dual-graphics). (If not easy to setup, I know there's a way to do it before it boots, but don't know how). CPU performance level - in windows you can pick "high performance", "power saver", etc.. to save batteries. My integrated camera w/light - it works but need an app where I can record videos, take snapshots, etc. can't find one that works. Thanks!

  Read the article

• Universal navigation menu across domains - would it be considered duplicate content?

  - by Jon Harley

  Across different sites on different second-level domains exists a universal navigation bar with a collection of roughly 30 links. This universal bar is exactly the same for every page on each domain. The bar's HTML, CSS and JavaScript are all stored in a subfolder for each domain and the HTML is embedded upon serving the page and is not being injected on the client side. None of the links use any rel directives and are as vanilla as can be. My question is about Google's duplicate content rule. Would something like this be considered duplicate content? Matt Cutt's blog post about duplicate content mentions boilerplate repetition, but then he mentions lengthy legalese. Since the text in this universal bar is brief and uses common terms, I wonder if this same rule applies. If this is considered duplicate content, what would be a good way to correct the problem?

  Read the article

• Managed Languages vs Compiled Language difference?

  - by l46kok

  I get confused when people try to make a distinction between compiled languages and managed languages. From experience, I understand that most consider compiled languages to be C,C++ while managed languages are Java,C# (There are obviously more, but these are just few examples). But what exactly is the core difference between the two types of languages? My understanding is that any program, regardless of what language you use is essentially "compiled" into a low-level machine code which is then interpreted, so does that kinda make managed languages a subset of compiled languages (That is, all managed languages are compiled languages but not the other way around)?

  Read the article

• IFS Achieves Oracle Exadata Optimized and Oracle Exalogic Optimized Status

  - by Javier Puerta

  IFS, the global enterprise applications company, announces that it has earned Oracle Exadata Optimized and Oracle Exalogic Optimized status through Oracle PartnerNetwork (OPN), demonstrating that IFS Applications Release 8 has been tested and tuned on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud to deliver speed, scalability and reliability to customers. By combining IFS Applications with the Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud, IFS customers will be able to leverage benefits such as faster time to implementation, increased performance, as well as reduced energy and hardware footprint. IFS is a Platinum level member in Oracle PartnerNetwork. Initial test results showed that IFS Applications Release 8 material resource planning (MRP) batch jobs achieved a 2.5x performance improvement and a 2.2x increase in user transactions on Oracle Exadata Database Machine and Oracle Exalogic Elastic Cloud. Additionally, IFS Applications 8 achieved a 37x higher compression ratio, resulting in significantly shorter time for daily backup routines and lowering storage costs. Read full press release here

  Read the article

• Cannot set a credential for principal 'sa'

  - by hailey

  I was trying to change the SA password on my development server this morning and got an error. Msg 15535, Level 16, State 1, Line 1 Cannot set a credential for principal 'sa'. It was a little frustrating to get an error for a seemingly simple task but then agian maybe I screwed something up.  After doing a couple of searches i found a Microsoft KB (support.microsoft.com/kb/956177) "You receive an exception in SQL Server 2008 when you try to modify the properties of the SQL Server Administrator account by using SQL Server Management Studio".  It was for SQL 2008 but it worked for my SQL 2005 sp3 server just fine.  You have to click the Map to Credential check box but you don't have to add any credetials just click the OK button to complete and that's it.

  Read the article

• design of 'game engine' for small javascript games?

  - by Matt Ball

  I'm making a group of two or three simple javascript games for fun. After someone finishes one game, they'll be presented with a harder or easier version of another game depending on whether the original game was won or lost. I have a high-level question about the design of things: So far I've created a class for one game type that manages the interaction with the UI and the state of the game itself. But for tracking how many of the subgames have been won, or for understanding whether the next game presented should be more or less difficult, are there arguments to be made for making a 'game engine' class? How does the engine communicate to the games? For instance, when a game is won, how is that information relayed to the engine? Is there a better or more common design? (If you want to see what I have so far, the games are slowly taking shape here: https://github.com/yosemitebandit/candela and can be viewed at http://yosemitebandit.com/candela)

  Read the article

• ASP.NET 4 Website Fails to Start on Your TFS 2010 Server?

  - by jdanforth

  Getting a “Could not find permission set named ‘ASP.Net’” error on your TFS 2010 server? It may have to do with the fact you’re trying to run ASP.NET as a child site of a SharePoint Web Site. The problem is described in the “ASP.NET 4 braking changes” site:   This error occurs because the ASP.NET 4 code access security (CAS) infrastructure looks for a permission set named ASP.Net. However, the partial trust configuration file that is referenced by WSS_Minimal does not contain any permission sets with that name. Currently there is not a version of SharePoint available that is compatible with ASP.NET. As a result, you should not attempt to run an ASP.NET 4 Web site as a child site underneath SharePoint Web sites.   There is a workaround you could try by setting this in your web.config, if you know what you’re doing: <trust level="Full" originUrl="" />

  Read the article

• GDD-BR 2010 [2E] Building Business Apps using Google Web Toolkit and Spring Roo

  GDD-BR 2010 [2E] Building Business Apps using Google Web Toolkit and Spring Roo Speaker: Chris Ramsdale Track: Cloud Computing Time: 14:40 - 15:25 Room: sala[2] Level: 201 Who says you can't build rich web apps for your business? Follow along in this session to learn how you can use the latest integrated set of tools from Google and VMware to take your internal business apps into the cloud. We'll cover how to get started using GWT with Spring Roo and SpringSource Tool Suite (STS), as well as the new data presentation widgets and MVP framework that will be available in the 2.1 release of GWT. From: GoogleDevelopers Views: 69 0 ratings Time: 45:56 More in Science & Technology

  Read the article

< Previous Page | 244 245 246 247 248 249 250 251 252 253 254 255  | Next Page >