Search Results

Search found 7546 results on 302 pages for 'syntax highlight'.

Page 249/302 | < Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >

• Feynman's inbox

  - by user12607414

  Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

  Read the article

• BI Applications overview

  - by sv744

  Welcome to Oracle BI applications blog! This blog will talk about various features, general roadmap, description of functionality and implementation steps related to Oracle BI applications. In the first post we start with an overview of the BI apps and will delve deeper into some of the topics below in the upcoming weeks and months. If there are other topics you would like us to talk about, pl feel free to provide feedback on that. The Oracle BI applications are a set of pre-built applications that enable pervasive BI by providing role-based insight for each functional area, including sales, service, marketing, contact center, finance, supplier/supply chain, HR/workforce, and executive management. For example, Sales Analytics includes role-based applications for sales executives, sales management, as well as front-line sales reps, each of whom have different needs. The applications integrate and transform data from a range of enterprise sources—including Siebel, Oracle, PeopleSoft, SAP, and others—into actionable intelligence for each business function and user role. This blog  starts with the key benefits and characteristics of Oracle BI applications. In a series of subsequent blogs, each of these points will be explained in detail. Why BI apps? Demonstrate the value of BI to a business user, show reports / dashboards / model that can answer their business questions as part of the sales cycle. Demonstrate technical feasibility of BI project and significantly lower risk and improve success Build Vs Buy benefit Don’t have to start with a blank sheet of paper. Help consolidate disparate systems Data integration in M&A situations Insulate BI consumers from changes in the OLTP Present OLTP data and highlight issues of poor data / missing data – and improve data quality and accuracy Prebuilt Integrations BI apps support prebuilt integrations against leading ERP sources: Fusion Applications, E- Business Suite, Peoplesoft, JD Edwards, Siebel, SAP Co-developed with inputs from functional experts in BI and Applications teams. Out of the box dimensional model to source model mappings Multi source and Multi Instance support Rich Data Model    BI apps have a very rich dimensionsal data model built over 10 years that incorporates best practises from BI modeling perspective as well as reflect the source system complexities  Thanks for reading a long post, and be on the lookout for future posts.  We will look forward to your valuable feedback on these topics as well as suggestions on what other topics would you like us to cover. I Conformed dimensional model across all business subject areas allows cross functional reporting, e.g. customer / supplier 360 Over 360 fact tables across 7 product areas CRM – 145, SCM – 47, Financials – 28, Procurement – 20, HCM – 27, Projects – 18, Campus Solutions – 21, PLM - 56 Supported by 300 physical dimensions Support for extensive calendars; Gregorian, enterprise and ledger based Conformed data model and metrics for real time vs warehouse based reporting  Multi-tenant enabled Extensive BI related transformations BI apps ETL and data integration support various transformations required for dimensional models and reporting requirements. All these have been distilled into common patterns and abstracted logic which can be readily reused across different modules Slowly Changing Dimension support Hierarchy flattening support Row / Column Hybrid Hierarchy Flattening As Is vs. As Was hierarchy support Currency Conversion :-  Support for 3 corporate, CRM, ledger and transaction currencies UOM conversion Internationalization / Localization Dynamic Data translations Code standardization (Domains) Historical Snapshots Cycle and process lifecycle computations Balance Facts Equalization of GL accounting chartfields/segments Standardized values for categorizing GL accounts Reconciliation between GL and subledgers to track accounted/transferred/posted transactions to GL Materialization of data only available through costly and complex APIs e.g. Fusion Payroll, EBS / Fusion Accruals Complex event Interpretation of source data – E.g. o    What constitutes a transfer o    Deriving supervisors via position hierarchy o    Deriving primary assignment in PSFT o    Categorizing and transposition to measures of Payroll Balances to specific metrics to support side by side comparison of measures of for example Fixed Salary, Variable Salary, Tax, Bonus, Overtime Payments. o    Counting of Events – E.g. converting events to fact counters so that for example the number of hires can easily be added up and compared alongside the total transfers and terminations. Multi pass processing of multiple sources e.g. headcount, salary, promotion, performance to allow side to side comparison. Adding value to data to aid analysis through banding, additional domain classifications and groupings to allow higher level analytical reporting and data discovery Calculation of complex measures examples: o    COGs, DSO, DPO, Inventory turns  etc o    Transfers within a Hierarchy or out of / into a hierarchy relative to view point in hierarchy. Configurability and Extensibility support  BI apps offer support for extensibility for various entities as automated extensibility or part of extension methodology Key Flex fields and Descriptive Flex support  Extensible attribute support (JDE)  Conformed Domains ETL Architecture BI apps offer a modular adapter architecture which allows support of multiple product lines into a single conformed model Multi Source Multi Technology Orchestration – creates load plan taking into account task dependencies and customers deployment to generate a plan based on a customers of multiple complex etl tasks Plan optimization allowing parallel ETL tasks Oracle: Bit map indexes and partition management High availability support    Follow the sun support. TCO BI apps support several utilities / capabilities that help with overall total cost of ownership and ensure a rapid implementation Improved cost of ownership – lower cost to deploy On-going support for new versions of the source application Task based setups flows Data Lineage Functional setup performed in Web UI by Functional person Configuration Test to Production support Security BI apps support both data and object security enabling implementations to quickly configure the application as per the reporting security needs Fine grain object security at report / dashboard and presentation catalog level Data Security integration with source systems  Extensible to support external data security rules Extensive Set of KPIs Over 7000 base and derived metrics across all modules Time series calculations (YoY, % growth etc) Common Currency and UOM reporting Cross subject area KPIs (analyzing HR vs GL data, drill from GL to AP/AR, etc) Prebuilt reports and dashboards 3000+ prebuilt reports supporting a large number of industries Hundreds of role based dashboards Dynamic currency conversion at dashboard level Highly tuned Performance The BI apps have been tuned over the years for both a very performant ETL and dashboard performance. The applications use best practises and advanced database features to enable the best possible performance. Optimized data model for BI and analytic queries Prebuilt aggregates& the ability for customers to create their own aggregates easily on warehouse facts allows for scalable end user performance Incremental extracts and loads Incremental Aggregate build Automatic table index and statistics management Parallel ETL loads Source system deletes handling Low latency extract with Golden Gate Micro ETL support Bitmap Indexes Partitioning support Modularized deployment, start small and add other subject areas seamlessly Source Specfic Staging and Real Time Schema Support for source specific operational reporting schema for EBS, PSFT, Siebel and JDE Application Integrations The BI apps also allow for integration with source systems as well as other applications that provide value add through BI and enable BI consumption during operational decision making Embedded dashboards for Fusion, EBS and Siebel applications Action Link support Marketing Segmentation Sales Predictor Dashboard Territory Management External Integrations The BI apps data integration choices include support for loading extenral data External data enrichment choices : UNSPSC, Item class etc. Extensible Spend Classification Broad Deployment Choices Exalytics support Databases :  Oracle, Exadata, Teradata, DB2, MSSQL ETL tool of choice : ODI (coming), Informatica Extensible and Customizable Extensible architecture and Methodology to add custom and external content Upgradable across releases

  Read the article

• Using Appendbuffers in unity for terrain generation

  - by Wardy

  Like many others I figured I would try and make the most of the monster processing power of the GPU but I'm having trouble getting the basics in place. CPU code: using UnityEngine; using System.Collections; public class Test : MonoBehaviour { public ComputeShader Generator; public MeshTopology Topology; void OnEnable() { var computedMeshPoints = ComputeMesh(); CreateMeshFrom(computedMeshPoints); } private Vector3[] ComputeMesh() { var size = (32*32) * 4; // 4 points added for each x,z pos var buffer = new ComputeBuffer(size, 12, ComputeBufferType.Append); Generator.SetBuffer(0, "vertexBuffer", buffer); Generator.Dispatch(0, 1, 1, 1); var results = new Vector3[size]; buffer.GetData(results); buffer.Dispose(); return results; } private void CreateMeshFrom(Vector3[] generatedPoints) { var filter = GetComponent<MeshFilter>(); var renderer = GetComponent<MeshRenderer>(); if (generatedPoints.Length > 0) { var mesh = new Mesh { vertices = generatedPoints }; var colors = new Color[generatedPoints.Length]; var indices = new int[generatedPoints.Length]; //TODO: build this different based on topology of the mesh being generated for (int i = 0; i < indices.Length; i++) { indices[i] = i; colors[i] = Color.blue; } mesh.SetIndices(indices, Topology, 0); mesh.colors = colors; mesh.RecalculateNormals(); mesh.Optimize(); mesh.RecalculateBounds(); filter.sharedMesh = mesh; } else { filter.sharedMesh = null; } } } GPU code: #pragma kernel Generate AppendStructuredBuffer<float3> vertexBuffer : register(u0); void genVertsAt(uint2 xzPos) { //TODO: put some height generation code here. // could even run marching cubes / dual contouring code. float3 corner1 = float3( xzPos[0], 0, xzPos[1] ); float3 corner2 = float3( xzPos[0] + 1, 0, xzPos[1] ); float3 corner3 = float3( xzPos[0], 0, xzPos[1] + 1); float3 corner4 = float3( xzPos[0] + 1, 0, xzPos[1] + 1 ); vertexBuffer.Append(corner1); vertexBuffer.Append(corner2); vertexBuffer.Append(corner3); vertexBuffer.Append(corner4); } [numthreads(32, 1, 32)] void Generate (uint3 threadId : SV_GroupThreadID, uint3 groupId : SV_GroupID) { uint2 currentXZ = unint2( groupId.x * 32 + threadId.x, groupId.z * 32 + threadId.z); genVertsAt(currentXZ); } Can anyone explain why when I call "buffer.GetData(results);" on the CPU after the compute dispatch call my buffer is full of Vector3(0,0,0), I'm not expecting any y values yet but I would expect a bunch of thread indexes in the x,z values for the Vector3 array. I'm not getting any errors in any of this code which suggests it's correct syntax-wise but maybe the issue is a logical bug. Also: Yes, I know I'm generating 4,000 Vector3's and then basically round tripping them. However, the purpose of this code is purely to learn how round tripping works between CPU and GPU in Unity.

  Read the article

• Using IIS Logs for Performance Testing with Visual Studio

  - by Tarun Arora

  In this blog post I’ll show you how you can play back the IIS Logs in Visual Studio to automatically generate the web performance tests. You can also download the sample solution I am demo-ing in the blog post. Introduction Performance testing is as important for new websites as it is for evolving websites. If you already have your website running in production you could mine the information available in IIS logs to analyse the dense zones (most used pages) and performance test those pages rather than wasting time testing & tuning the least used pages in your application. What are IIS Logs To help with server use and analysis, IIS is integrated with several types of log files. These log file formats provide information on a range of websites and specific statistics, including Internet Protocol (IP) addresses, user information and site visits as well as dates, times and queries. If you are using IIS 7 and above you will find the log files in the following directory C:\Interpub\Logs\ Walkthrough 1. Download and Install Log Parser from the Microsoft download Centre. You should see the LogParser.dll in the install folder, the default install location is C:\Program Files (x86)\Log Parser 2.2. LogParser.dll gives us a library to query the iis log files programmatically. By the way if you haven’t used Log Parser in the past, it is a is a powerful, versatile tool that provides universal query access to text-based data such as log files, XML files and CSV files, as well as key data sources on the Windows operating system such as the Event Log, the Registry, the file system, and Active Directory. More details… 2. Create a new test project in Visual Studio. Let’s call it IISLogsToWebPerfTestDemo.   3.  Delete the UnitTest1.cs class that gets created by default. Right click the solution and add a project of type class library, name it, IISLogsToWebPerfTestEngine. Delete the default class Program.cs that gets created with the project. 4. Under the IISLogsToWebPerfTestEngine project add a reference to Microsoft.VisualStudio.QualityTools.WebTestFramework – c:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\PublicAssemblies\Microsoft.VisualStudio.QualityTools.WebTestFramework.dll LogParser also called MSUtil - c:\users\tarora\documents\visual studio 2010\Projects\IisLogsToWebPerfTest\IisLogsToWebPerfTestEngine\obj\Debug\Interop.MSUtil.dll 5. Right click IISLogsToWebPerfTestEngine project and add a new classes – IISLogReader.cs The IISLogReader class queries the iis logs using the log parser. using System; using System.Collections.Generic; using System.Text; using MSUtil; using LogQuery = MSUtil.LogQueryClassClass; using IISLogInputFormat = MSUtil.COMIISW3CInputContextClassClass; using LogRecordSet = MSUtil.ILogRecordset; using Microsoft.VisualStudio.TestTools.WebTesting; using System.Diagnostics; namespace IisLogsToWebPerfTestEngine { // By making use of log parser it is possible to query the iis log using select queries public class IISLogReader { private string _iisLogPath; public IISLogReader(string iisLogPath) { _iisLogPath = iisLogPath; } public IEnumerable<WebTestRequest> GetRequests() { LogQuery logQuery = new LogQuery(); IISLogInputFormat iisInputFormat = new IISLogInputFormat(); // currently these columns give us suffient information to construct the web test requests string query = @"SELECT s-ip, s-port, cs-method, cs-uri-stem, cs-uri-query FROM " + _iisLogPath; LogRecordSet recordSet = logQuery.Execute(query, iisInputFormat); // Apply a bit of transformation while (!recordSet.atEnd()) { ILogRecord record = recordSet.getRecord(); if (record.getValueEx("cs-method").ToString() == "GET") { string server = record.getValueEx("s-ip").ToString(); string path = record.getValueEx("cs-uri-stem").ToString(); string querystring = record.getValueEx("cs-uri-query").ToString(); StringBuilder urlBuilder = new StringBuilder(); urlBuilder.Append("http://"); urlBuilder.Append(server); urlBuilder.Append(path); if (!String.IsNullOrEmpty(querystring)) { urlBuilder.Append("?"); urlBuilder.Append(querystring); } // You could make substitutions by introducing parameterized web tests. WebTestRequest request = new WebTestRequest(urlBuilder.ToString()); Debug.WriteLine(request.UrlWithQueryString); yield return request; } recordSet.moveNext(); } Console.WriteLine(" That's it! Closing the reader"); recordSet.close(); } } }   6. Connect the dots by adding the project reference ‘IisLogsToWebPerfTestEngine’ to ‘IisLogsToWebPerfTest’. Right click the ‘IisLogsToWebPerfTest’ project and add a new class ‘WebTest1Coded.cs’ The WebTest1Coded.cs inherits from the WebTest class. By overriding the GetRequestMethod we can inject the log files to the IISLogReader class which uses Log parser to query the log file and extract the web requests to generate the web test request which is yielded back for play back when the test is run. namespace IisLogsToWebPerfTest { using System; using System.Collections.Generic; using System.Text; using Microsoft.VisualStudio.TestTools.WebTesting; using Microsoft.VisualStudio.TestTools.WebTesting.Rules; using IisLogsToWebPerfTestEngine; // This class is a coded web performance test implementation, that simply passes // the path of the iis logs to the IisLogReader class which does the heavy // lifting of reading the contents of the log file and converting them to tests. // You could have multiple such classes that inherit from WebTest and implement // GetRequestEnumerator Method and pass differnt log files for different tests. public class WebTest1Coded : WebTest { public WebTest1Coded() { this.PreAuthenticate = true; } public override IEnumerator<WebTestRequest> GetRequestEnumerator() { // substitute the highlighted path with the path of the iis log file IISLogReader reader = new IISLogReader(@"C:\Demo\iisLog1.log"); foreach (WebTestRequest request in reader.GetRequests()) { yield return request; } } } }   7. Its time to fire the test off and see the iis log playback as a web performance test. From the Test menu choose Test View Window you should be able to see the WebTest1Coded test show up. Highlight the test and press Run selection (you can also debug the test in case you face any failures during test execution). 8. Optionally you can create a Load Test by keeping ‘WebTest1Coded’ as the base test. Conclusion You have just helped your testing team, you now have become the coolest developer in your organization! Jokes apart, log parser and web performance test together allow you to save a lot of time by not having to worry about what to test or even worrying about how to record the test. If you haven’t already, download the solution from here. You can take this to the next level by using LogParser to extract the log files as part of an end of day batch to a database. See the usage trends by user this solution over a longer term and have your tests consume the web requests now stored in the database to generate the web performance tests. If you like the post, don’t forget to share … Keep RocKiNg!

  Read the article

• After each command tmux prints: ps1_update: command not found

  - by B.I.

  On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

  Read the article

• GLSL: Strange light reflections

  - by Tom

  According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices? SOLVED Solved... 3 days needed for changing one letter from this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(12*sizeof(float)) // array buffer offset ); to this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(11*sizeof(float)) // array buffer offset ); see difference? :)

  Read the article

• Fast Data - Big Data's achilles heel

  - by thegreeneman

  At OOW 2013 in Mark Hurd and Thomas Kurian's keynote, they discussed Oracle's Fast Data software solution stack and discussed a number of customers deploying Oracle's Big Data / Fast Data solutions and in particular Oracle's NoSQL Database.  Since that time, there have been a large number of request seeking clarification on how the Fast Data software stack works together to deliver on the promise of real-time Big Data solutions.   Fast Data is a software solution stack that deals with one aspect of Big Data, high velocity.   The software in the Fast Data solution stack involves 3 key pieces and their integration:  Oracle Event Processing, Oracle Coherence, Oracle NoSQL Database.   All three of these technologies address a high throughput, low latency data management requirement.   Oracle Event Processing enables continuous query to filter the Big Data fire hose, enable intelligent chained events to real-time service invocation and augments the data stream to provide Big Data enrichment. Extended SQL syntax allows the definition of sliding windows of time to allow SQL statements to look for triggers on events like breach of weighted moving average on a real-time data stream.    Oracle Coherence is a distributed, grid caching solution which is used to provide very low latency access to cached data when the data is too big to fit into a single process, so it is spread around in a grid architecture to provide memory latency speed access.  It also has some special capabilities to deploy remote behavioral execution for "near data" processing.   The Oracle NoSQL Database is designed to ingest simple key-value data at a controlled throughput rate while providing data redundancy in a cluster to facilitate highly concurrent low latency reads.  For example, when large sensor networks are generating data that need to be captured while analysts are simultaneously extracting the data using range based queries for upstream analytics.  Another example might be storing cookies from user web sessions for ultra low latency user profile management, also leveraging that data using holistic MapReduce operations with your Hadoop cluster to do segmented site analysis.  Understand how NoSQL plays a critical role in Big Data capture and enrichment while simultaneously providing a low latency and scalable data management infrastructure thru clustered, always on, parallel processing in a shared nothing architecture. Learn how easily a NoSQL cluster can be deployed to provide essential services in industry specific Fast Data solutions. See these technologies work together in a demonstration highlighting the salient features of these Fast Data enabling technologies in a location based personalization service. The question then becomes how do these things work together to deliver an end to end Fast Data solution.  The answer is that while different applications will exhibit unique requirements that may drive the need for one or the other of these technologies, often when it comes to Big Data you may need to use them together.   You may have the need for the memory latencies of the Coherence cache, but just have too much data to cache, so you use a combination of Coherence and Oracle NoSQL to handle extreme speed cache overflow and retrieval.   Here is a great reference to how these two technologies are integrated and work together.  Coherence & Oracle NoSQL Database.   On the stream processing side, it is similar as with the Coherence case.  As your sliding windows get larger, holding all the data in the stream can become difficult and out of band data may need to be offloaded into persistent storage.  OEP needs an extreme speed database like Oracle NoSQL Database to help it continue to perform for the real time loop while dealing with persistent spill in the data stream.  Here is a great resource to learn more about how OEP and Oracle NoSQL Database are integrated and work together.  OEP & Oracle NoSQL Database.

  Read the article

• What Counts For a DBA – Depth

  - by Louis Davidson

  SQL Server offers very simple interfaces to many of its features. Most people could open up SSMS, connect to a server, write a simple query and see the results. Even several of the core DBA tasks are deceptively straightforward. It doesn’t take a rocket scientist to perform a basic database backup or run a trace (even using the newfangled Extended Events!). However, appearances can be deceptive, and often times it is really important that a DBA understands not just the basics of how to perform a task, but why we do a task, and how that task works. As an analogy, consider a child walking into a darkened room. Most would know that they need to turn on the light, and how to do it, so they flick the switch. But what happens if light fails to shine forth. Most would immediately tell you that you need to consider changing the light bulb. So you hop in the car and take them to the local home store and instruct them to buy a replacement. Confronted with a 40 foot display of light bulbs, how will they decide which of the hundreds of types of bulbs, of different types, fittings, shapes, colors, power and efficiency ratings, is the right choice? Obviously the main lesson the child is going to learn this day is how to use their cell phone as a flashlight so they don’t have to ask for help the next time. Likewise, when the metaphorical toddlers who use your database server have issues, they will instinctively know something is wrong, and may even have some idea what caused it, but will have no depth of knowledge to figure out the right solution. That is where the DBA comes in and attempts to save the day. However, when one looks beneath the shiny UI, SQL Server has its own “40 foot display of light bulbs”, in the form of the tremendous number of tools and the often-bewildering amount of information they can present to the DBA, to help us find issues. Unfortunately, resorting to guesswork, to trying different “bulbs” over and over, hoping to stumble on the answer. This is where the right depth of knowledge goes a long way. If we need to write a SELECT statement, then knowing the syntax and where to find the data is not enough. Knowledge of indexes and query plans is essential. Without it, we might hit on a query that “works”, but we are basically still a user, not a programmer, because we have no real control over our platform. Is that level of knowledge deep enough? Probably not, since knowledge of the underlying metadata and structures would be very useful in helping us make sense of any query plan. Understanding the structure of an index makes the “key lookup” operator not sound like what you do when someone tapes your car key to the ceiling. So is even this level of understanding deep enough? Do we need to understand the memory architecture used to process the query? It might be a comforting level of knowledge, and will doubtless come in handy at some point, but is not strictly necessary in most cases. Beyond that lies (more or less) full knowledge of SQL language and the intricacies of every step the SQL Server engine takes to process our query. My personal theory is that, as a professional, our knowledge of a given task should extend, at a minimum, one level deeper than is strictly necessary to perform the task. Anything deeper can be left to the ridiculously smart, or obsessive, or both. As an example. tasked with storing an integer value between 0 and 99999999, it’s essential that I know that choosing an Integer over Decimal(8,0) will likely offer performance benefits. It is then useful that I also understand the value of adding a CHECK constraint, to make sure the values are valid to the desired range; and comforting that I know a little about the underlying processors, registers and computer math. Anything further, I leave to the likes of Joe Chang, whose recent blog post on the topic offers depth by the bucketful!  

  Read the article

• edited and reversed changes on .htaccess - site starts redirecting to .comindex.php/

  - by Aurigae

  Site is a Joomla 2.5 site. I wanted to add a non www to www redirect to the htaccess file, did so, then the redirection went mad, reversed but still the site redirects. When i click view site in admin panel, i get linked to http://domain.comindex.php/ The website is http://www.domain.com Visiting the website URL works without www, but once you click on projects it acts mad too. Projects is managed with joomshopping extension. EDIT: the redirect also happens when rewrite is deactivated in admin panel. ## # @package Joomla # @copyright Copyright (C) 2005 - 2012 Open Source Matters. All rights reserved. # @license GNU General Public License version 2 or later; see LICENSE.txt ## ## # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE! # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. ## ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks ## Mod_rewrite in use. RewriteEngine On ## Begin - Rewrite rules to block out some common exploits. # If you experience problems on your site block out the operations listed below # This attempts to block the most common type of exploit `attempts` to Joomla! # # Block out any script trying to base64_encode data within the URL. RewriteCond %{QUERY_STRING} base64_encode[^(]*\([^)]*\) [OR] # Block out any script that includes a <script> tag in URL. RewriteCond %{QUERY_STRING} (<|%3C)([^s]*s)+cript.*(>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL. RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL. RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Return 403 Forbidden header and show the content of the root homepage RewriteRule .* index.php [F] # ## End - Rewrite rules to block out some common exploits. ## Begin - Custom redirects # # If you need to redirect some pages, or set a canonical non-www to # www redirect (or vice versa), place that code here. Ensure those # redirects use the correct RewriteRule syntax and the [R=301,L] flags. # ## End - Custom redirects ## # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root). ## # RewriteBase / ## Begin - Joomla! core SEF Section. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # # If the requested path and file is not /index.php and the request # has not already been internally rewritten to the index.php script RewriteCond %{REQUEST_URI} !^/index\.php # and the request is for something within the component folder, # or for the site root, or for an extensionless URL, or the # requested URL ends with one of the listed extensions RewriteCond %{REQUEST_URI} /component/|(/[^.]*|\.(php|html?|feed|pdf|vcf|raw))$ [NC] # and the requested path and file doesn't directly match a physical file RewriteCond %{REQUEST_FILENAME} !-f # and the requested path and file doesn't directly match a physical folder RewriteCond %{REQUEST_FILENAME} !-d # internally rewrite the request to the index.php script RewriteRule .* index.php [L] # ## End - Joomla! core SEF Section. Redirect 301 /index.html /index.php Redirect 301 /services /project Redirect 301 /projects/projects.html /project Redirect 301 /projects/project1.html /project Redirect 301 /projects/project2.html /project Redirect 301 /projects /project Redirect 301 /keypersonnel.html /about-agrin/keystaff Redirect 301 /cooperation.htm /about-agrin/intcoop Redirect 301 /member.html /about-agrin/memberships Redirect 301 /contact.html /contacts Redirect 301 /hr.htm /jobs Redirect 301 /index.php/404 /index.php

  Read the article

• Hopping/Tumbling Windows Could Introduce Latency.

  This is a pre-article to one I am going to be writing on adjusting an event’s time and duration to satisfy business process requirements but it is one that I think is really useful when understanding the way that Hopping/Tumbling windows work within StreamInsight.  A Tumbling window is just a special shortcut version of  a Hopping window where the width of the window is equal to the size of the hop Here is the simplest and often used definition for a Hopping Window.  You can find them all here public static CepWindowStream<CepWindow<TPayload>> HoppingWindow<TPayload>(     this CepStream<TPayload> source,     TimeSpan windowSize,     TimeSpan hopSize,     WindowInputPolicy inputPolicy,     HoppingWindowOutputPolicy outputPolicy )   And here is the definition for a Tumbling Window public static CepWindowStream<CepWindow<TPayload>> TumblingWindow<TPayload>(     this CepStream<TPayload> source,     TimeSpan windowSize,     WindowInputPolicy inputPolicy,     HoppingWindowOutputPolicy outputPolicy )   These methods allow you to group events into windows of a temporal size.  It is a really useful and simple feature in StreamInsight.  One of the downsides though is that the windows cannot be flushed until an event in a following window occurs.  This means that you will potentially never see some events or see them with a delay.  Let me explain. Remember that a stream is a potentially unbounded sequence of events. Events in StreamInsight are given a StartTime.  It is this StartTime that is used to calculate into which temporal window an event falls.  It is best practice to assign a timestamp from the source system and not one from the system clock on the processing server.  StreamInsight cannot know when a window is over.  It cannot tell whether you have received all events in the window or whether some events have been delayed which means that StreamInsight cannot flush the stream for you.   Imagine you have events with the following Timestamps 12:10:10 PM 12:10:20 PM 12:10:35 PM 12:10:45 PM 11:59:59 PM And imagine that you have defined a 1 minute Tumbling Window over this stream using the following syntax var HoppingStream = from shift in inputStream.TumblingWindow(TimeSpan.FromMinutes(1),HoppingWindowOutputPolicy.ClipToWindowEnd) select new WindowCountPayload { CountInWindow = (Int32)shift.Count() };   The events between 12:10:10 PM and 12:10:45 PM will not be seen until the event at 11:59:59 PM arrives.  This could be a real problem if you need to react to windows promptly This can always be worked around by using a different design pattern but a lot of the examples I see assume there is a constant, very frequent stream of events resulting in windows always being flushed. Further examples of using windowing in StreamInsight can be found here

  Read the article

• Cloud Adoption Challenges

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2013/11/07/cloud-adoption-challenges.aspxWhile cloud computing makes sense for most organizations and countless projects, I have seen customers significantly struggle with cloud adoption challenges. This blog post is not an attempt to provide a generic assessment of cloud adoption; rather it is an account of personal experiences in the field, some of which may or may not apply to your organization. Cloud First, Burst? In the rush to cloud adoption some companies have made the decision to redesign their core system with a cloud first approach. However a cloud first approach means that the system may not work anymore on-premises after it has been redesigned, specifically if the system depends on Platform as a Service (PaaS) components (such as Azure Tables). While PaaS makes sense when your company is in a position to adopt the cloud exclusively, it can be difficult to leverage with systems that need to work in different clouds or on-premises. As a result, some companies are starting to rethink their cloud strategy by designing for on-premises first, and modify only the necessary components to burst when needed in the cloud. This generally means that the components need to work equally well in any environment, which requires leveraging Infrastructure as a Service (IaaS) or additional investments for PaaS applications, or both.  What’s the Problem? Although most companies can benefit from cloud computing, not all of them can clearly identify a business reason for doing so other than in very generic terms. I heard many companies claim “it’s cheaper”, or “it allows us to scale”, without any specific metric or clear strategy behind the adoption decision. Other companies have a very clear strategy behind cloud adoption and can precisely articulate business benefits, such as “we have a 500% increase in traffic twice a year, so we need to burst in the cloud to avoid doubling our network and server capacity”. Understanding the problem being solved through by adopting cloud computing can significantly help organizations determine the optimum path and timeline to adoption. Performance or Scalability? I stopped counting the number of times I heard “the cloud doesn’t scale; our database runs faster on a laptop”.  While performance and scalability are related concepts, they are nonetheless different in nature. Performance is a measure of response time under a given load (meaning with a specific number of users), while scalability is the performance curve over various loads. For example one system could see great performance with 100 users, but timeout with 1,000 users, in which case the system wouldn’t scale. However another system could have average performance with 100 users, but display the exact same performance with 1,000,000 users, in which case the system would scale. Understanding that cloud computing does not usually provide high performance, but instead provides the tools necessary to build a scalable system (usually using PaaS services such as queuing and data federation), is fundamental to proper cloud adoption. Uptime? Last but not least, you may want to read the Service Level Agreement of your cloud provider in detail if you haven’t done so. If you are expecting 99.99% uptime annually you may be in for a surprise. Depending on the component being used, there may be no associated SLA at all! Other components may be restarted at any time, or services may experience failover conditions weekly ( or more) based on current overall conditions of the cloud service provider, most of which are outside of your control. As a result, for PaaS cloud environments (and to a certain extent some IaaS systems), applications need to assume failure and gracefully retry to be successful in the cloud in order to provide service continuity to end users. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting (http://www.bluesyntax.net). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• how to code multiple button navigation with java activities [migrated]

  - by user1738212

  Question 1: I have 2 activities. I was wondering how to optimize it. I can either create 2 activities with multiple listeners. Or create multiple java files for each button(onclick listener) Question 2: I have tried to create multiple listeners in one java but can only get one button to work. What is the syntax for multiple listeners in one java file? Here is my *updated code: now the issue is no matter what button is clicked on it leads to the same page. package install.fineline; import android.app.Activity; import android.content.Context; import android.content.Intent; import android.os.Bundle; import android.widget.Button; import android.view.View; import android.view.View.OnClickListener; public class Activity1 extends Activity2 { Button Button1; Button Button2; Button Button3; Button Button4; Button Button5; Button Button6; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.fineline); addListenerOnButton(); } public void addListenerOnButton() { final Context context = this; Button1 = (Button) findViewById(R.id.autobody); Button1.setOnClickListener(new OnClickListener() { public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button2 = (Button) findViewById(R.id.glass); Button2.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button3 = (Button) findViewById(R.id.wheels); Button3.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button4 = (Button) findViewById(R.id.speedy); Button4.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button5 = (Button) findViewById(R.id.sevan); Button5.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); Button6 = (Button) findViewById(R.id.towing); Button6.setOnClickListener(new OnClickListener() { @Override public void onClick(View arg0) { Intent intent = new Intent(context, Activity1.class); startActivity(intent); } }); }} activity2.java package install.fineline; import android.app.Activity; import android.os.Bundle; import android.widget.Button; public class Activity2 extends Activity { Button Button1; public void onCreate1(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.autobody); } Button Button2; public void onCreate2(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.glass); } Button Button3; public void onCreate3(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.wheels); } Button button4; public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.speedy); } Button Button5; public void onCreate5(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.sevan); } Button Button6; public void onCreate6(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.towing); }}

  Read the article

• C# Dev Challenge Part 1 of n &ndash; Beginner Edition

  - by mbcrump

  I developed this challenge to test one’s knowledge of C Sharp. I am planning on creating several challenges with different skill sets, so don’t get mad if this challenge doesn’t well challenge you... I noticed that most people like short quizzes so this one only contains 5 questions. All of the challenges are clear and concise of what I am asking you to do. No smoke and mirrors here, meaning that none of the code has syntax errors. The purpose of this exercise is to test several OOP concepts and see how much of the C# language you really know. Question #1 – Lets start off Easy… Will the following code snippet compile successfully? What does this question test? - Can this compile without a namespace? Do you have to have an entry point of “static void Main()”? class Test { static int Main() { System.Console.WriteLine("Developer Challenge"); return 0; } } Answer (select text in box below): Yes, it will compile successfully. Question #2 – What is the value of the Console.WriteLine statements? What does this question test? – Do I understand reference types/value types? If a variable is declared with the @ symbol and its not a reserved keyword does the application compile successfully? using System; internal struct MyStruct { public int Value; } internal class MyClass { public int Value; } class Test { static void Main() { MyStruct @struct1 = new MyStruct(); MyStruct @struct2 = @struct1; @struct2.Value = 100; MyClass @ref1 = new MyClass(); MyClass @ref2 = @ref1; @ref2.Value = 100; Console.WriteLine("Value Type: {0} {1}", @struct1.Value, @struct2.Value); Console.WriteLine("Reference Type: {0} {1}", @ref1.Value, @ref2.Value); } } Answer (select text in box below): Value Type: 0 100 Reference Type: 100 100 Question #3 – What is the value of the Console.WriteLine statements? What does this question test? – Can 2 objects reference the same point in memory? using System; class Test { static void Main() { string s1 = "Testing2"; string t1 = s1; Console.WriteLine(s1 == t1); Console.WriteLine((object)s1 == (object)t1); } } Answer (select text in box below): True True Question #4 – What is the value of the Console.WriteLine statements? What does this question test? – How does the “Stack” work – LIFO or FIFO?   using System; using System.Collections; class Test { static void Main() { Stack a = new Stack(5); a.Push("1"); a.Push("2"); a.Push("3"); a.Push("4"); a.Push("5"); foreach (var o in a) { Console.WriteLine(o); } } } Answer (select text in box below): 5 4 3 2 1 Question #5 – What is the value of the Console.WriteLine statements? What does this question test? – Array and General Looping Knowledge. using System; namespace ConsoleApplication5 { class Program { static void Main(string[] args) { int[] J_LIST = new int[5] { 1, 2, 3, 4, 5 }; int K = 10; int L = 5; foreach (var J in J_LIST) { K = K - J; L = K + 2 * J; Console.WriteLine("J = {0, 5} K = {1, 5} L = {2, 5}", J, K, L); } Console.ReadLine(); } } } Answer (select text in box below): J = 1 K = 9 L = 11 J = 2 K = 7 L = 11 J = 3 K = 4 L = 10 J = 4 K = 0 L = 8 J = 5 K = -5 L = 5 Stay Tuned for more challenges!

  Read the article

• GMLib Could not complete the operation due to error 80020101

  - by Pierrie

  I get this error "Could not complete the operation due to error 80020101." at random times when displaying a map with a marker on it. I use Delphi 2007 and GMLib [1.2.0 Final]. I have read up on the issue and some suggestions was that the problem is due to commenting or bad syntax in java code, and it was suggested that i take out all the commenting and check for errors in the java code. This i did, i recompiled and reinstalled GMLib after modifying the map.html file. I stripped it of all commenting and parsed it through ie for faults but found none, as expected. But the problem still occurs. Here is a sample of my code to show the map and add the marker : Var newmarker : TMarker; begin newmarker := GMMarker1.Add(); newmarker.Position.Lat := MarkersToPaint[i].Latitude; newmarker.Position.Lng := MarkersToPaint[i].Longitude; newmarker.Visible := True; newmarker.Title := MarkersToPaint[i].Title; GMMap1.RequiredProp.Center.Lat := midlat; GMMap1.RequiredProp.Center.Lng := midlong; GMMap1.RequiredProp.Zoom := 18; GMMarker1.ShowElements; GMMap1.Active := True; Any help in this matter will be greatly appreciated.

  Read the article

• XCode Build Parse Error 'Unexpected @ in Program'

  - by Grymjack

  I'm following a tutorial for creating an animation using Xcode Version 4.5.2 in Mountain Lion 10.8.2. When trying to build the code below, I get a Parse Error Unexpected '@' in program showing up for the 'hopAnimation=' line. While searching, I have found examples that build simple animations in a different way, but nothing that seems to address this particular problem. I'm a noob to XCode programming and if anyone could help me correct the syntax, I would highly appreciate it. I would also like to thank all the contributors to stackflow for making this such a valuable resource. Searching for the answers to most of my prior questions always seemed to have you guys at the top of the results list. ViewController.m - (void)viewDidLoad { // load all the frames of our animation into an array NSArray *hopAnimation; hopAnimation=[[NSArray alloc] arrayWithObjects: [UIImage imageNamed:@”frame-1.png”], [UIImage imageNamed:@”frame-2.png”], [UIImage imageNamed:@”frame-3.png”], [UIImage imageNamed:@”frame-4.png”], [UIImage imageNamed:@”frame-5.png”], [UIImage imageNamed:@”frame-6.png”], [UIImage imageNamed:@”frame-7.png”], [UIImage imageNamed:@”frame-8.png”], [UIImage imageNamed:@”frame-9.png”], [UIImage imageNamed:@”frame-10.png”], [UIImage imageNamed:@”frame-11.png”], [UIImage imageNamed:@”frame-12.png”], [UIImage imageNamed:@”frame-13.png”], [UIImage imageNamed:@”frame-14.png”], [UIImage imageNamed:@”frame-15.png”], [UIImage imageNamed:@”frame-16.png”], [UIImage imageNamed:@”frame-17.png”], [UIImage imageNamed:@”frame-18.png”], [UIImage imageNamed:@”frame-19.png”], [UIImage imageNamed:@”frame-20.png”],nil]; self.bunnyView1.animationImages=hopAnimation; self.bunnyView2.animationImages=hopAnimation; self.bunnyView3.animationImages=hopAnimation; self.bunnyView4.animationImages=hopAnimation; self.bunnyView5.animationImages=hopAnimation; self.bunnyView1.animationDuration=1; self.bunnyView2.animationDuration=1; self.bunnyView3.animationDuration=1; self.bunnyView4.animationDuration=1; self.bunnyView5.animationDuration=1; [super viewDidLoad]; }

  Read the article

• Unrecognized Token : "#" C# to SQLITE

  - by user2788405

  Background + Problem: ( Begginer here ) I want to populate sqlite db with values from a list I have in my c# code. Here's the sqlite code taken from finisarsqlite website: I modified it a bit by creating my own column names like "seq#" etc. But I'm getting the following error : "unrecognized token #" Maybe my syntax is off? Code: // [snip] - As C# is purely object-oriented the following lines must be put into a class: // We use these three SQLite objects: SQLiteConnection sqlite_conn; SQLiteCommand sqlite_cmd; SQLiteDataReader sqlite_datareader; // create a new database connection: sqlite_conn = new SQLiteConnection("Data Source=database.db;Version=3;New=True;Compress=True;"); // open the connection: sqlite_conn.Open(); // create a new SQL command: sqlite_cmd = sqlite_conn.CreateCommand(); // Let the SQLiteCommand object know our SQL-Query: sqlite_cmd.CommandText = "CREATE TABLE table1 (Seq# integer primary key, Field integer primary key, Description integer primary key);"; // Now lets execute the SQL ;D sqlite_cmd.ExecuteNonQuery(); <<< ---- This is where Error Occurs ! // Lets insert something into our new table: sqlite_cmd.CommandText = "INSERT INTO table1 (Seq#, Field, Description) VALUES (list[0], list[1], list[2]);"; // And execute this again ;D sqlite_cmd.ExecuteNonQuery(); // We are ready, now lets cleanup and close our connection: sqlite_conn.Close(); }

  Read the article

• Conditionally add htmlAttributes to ASP.NET MVC Html.ActionLink

  - by macca1

  I'm wondering if it's possible to conditionally add a parameter in a call to a method. For example, I am rendering a bunch of links (six total) for navigation in my Site.Master: <%= Html.ActionLink("About", "About", "Pages") %> | <%= Html.ActionLink("Contact", "Contact", "Pages") %> <%-- etc, etc. --%> I'd like to include a CSS class of "selected" for the link if it's on that page. So in my controller I'm returning this: ViewData.Add("CurrentPage", "About"); return View(); And then in the view I have an htmlAttributes dictionary: <% Dictionary<string,object> htmlAttributes = new Dictionary<string,object>(); htmlAttributes.Add("class","selected");%> Now my only question is how do I include the htmlAttributes for the proper ActionLink. I could do it this way for each link: <% htmlAttributes.Clear(); if (ViewData["CurrentPage"] == "Contact") htmlAttributes.Add("class","selected");%> <%= Html.ActionLink("Contact", "Contact", "Pages", htmlAttributes) %> But that seems a little repetitive. Is there some way to do something like this psuedo code: <%= Html.ActionLink("Contact", "Contact", "Pages", if(ViewData["CurrentPage"] == "Contact") { htmlAttributes }) %> That's obviously not valid syntax, but is there a correct way to do that? I'm open to any totally different suggestions for rendering these links. I'd like to stay with something like ActionLink that takes advantage of using my routes though instead of hard coding the tag.

  Read the article

• Problem with jqGrid in Internet Explorer 8

  - by Dave Swersky

  I have developed an ASP.NET MVC (version 2 RC) application with a ton of jqGrids. It's working like a champ in Firefox, but I've discovered a problem in IE8. The "Main View" grids can be filtered by a search box or one of a few dropdowns above the grid. I use some javascript to reset the url for the grid, then trigger a reload, thusly: function filterByName(filter) { if (filter == 'All') { $('#list').setGridParam({ url: 'Application/GetApplications' }); $('#list').trigger("reloadGrid"); } else { $('#list').setGridParam({ url: 'Application/GetAppByName/' + filter + '/' }); $('#list').trigger("reloadGrid"); } } This works like magic in Firefox, but I'm getting an HTTP 400 Bad Request when I do this in IE8. The IE8 client-side debugger is like flint and tinder compared to Firebug's flamethrower, so I'm not having much luck figuring out why it breaks in IE8. Has anyone seen this? Also, the jqGrid "trigger" method here is swallowing the AJAX exception. Is there a way to get it to bubble up so I can get to the exception details? UPDATE: The problem was with the syntax in my "onchange" event for the dropdowns. I was using: onchange="filterByMnemonic($('#drpMnemonic')[0].value); Which Firefox apparently doesn't mind but IE sees that as nuthin'. This, however, works in both browsers: onchange = "filterByMnemonic($('#drpMnemonic > option:selected').attr('value'));"

  Read the article

• Yii urlManager language in URL

  - by TaMeR

  I am trying to add a language to the url with following syntax: http://www.example.com/en/site/page/view/about What I have so far works with short urls like: http://www.example.com/en/site/contact but not with long once as in my first example Here is what I have so far: /config/main.php 'urlManager'=>array( 'class'=>'application.components.MyCUrlManager', 'urlFormat'=>'path', 'showScriptName'=>false, 'rules'=>array( '<language:\w+>/<controller:\w+>/<id:\d+>'=>'<controller>/view', '<language:\w+>/<controller:\w+>/<action:\w+>/<id:\d+>'=>'<controller>/<action>', '<language:\w+>/<controller:\w+>/<action:\w+>'=>'<controller>/<action>', ), ), <?php // components/MyCUrlManager.php class MyCUrlManager extends CUrlManager { public function createUrl($route,$params=array(),$ampersand='&') { if(isset($_POST['_lang'])){ Yii::app()->language = $_POST['_lang']; }elseif (!isset($route['language']) && $controller != 'srbac'){ $route['language']=Yii::app()->language; }else{ Yii::app()->language = $route['language']; } return parent::createUrl($route, $params, $ampersand); } } ?> class Controller extends CController: { /// ..... function init() { parent::init(); if (isset($_POST['_lang'])) { Yii::app()->setLanguage($_POST['_lang']); Yii::app()->session['_lang'] = Yii::app()->language; }elseif (isset(Yii::app()->session['_lang'])) { Yii::app()->setLanguage(Yii::app()->session['_lang']); } } } class LangBox extends CWidget { public function run() { $currentLang = Yii::app()->language; require_once 'Zend/Locale.php'; $locale = new Zend_Locale(); //$siteLanguages = $this->getLang(); $siteLanguages = array('en','de','tr'); foreach($siteLanguages as $value){ $list[$value] = $locale->getTranslation($value, 'Language', $value); } asort($list); $this->render('langBox', array('currentLang' => $currentLang, 'list'=>$list)); } }

  Read the article

• Calling C# object method from IronPython

  - by Jason

  I'm trying to embed a scripting engine in my game. Since I'm writing it in C#, I figured IronPython would be a great fit, but the examples I've been able to find all focus on calling IronPython methods in C# instead of C# methods in IronPython scripts. To complicate things, I'm using Visual Studio 2010 RC1 on Windows 7 64 bit. IronRuby works like I expect it would, but I'm not very familiar with Ruby or Python syntax. What I'm doing: ScriptEngine engine = Python.CreateEngine(); ScriptScope scope = engine.CreateScope(); //Test class with a method that prints to the screen. scope.SetVariable("test", this); ScriptSource source = engine.CreateScriptSourceFromString("test.SayHello()", Microsoft.Scripting.SourceCodeKind.Statements); source.Execute(scope); This generates an error, "'TestClass' object has no attribute 'SayHello'" This exact set up works fine with IronRuby though using "self.test.SayHello()" I'm wary using IronRuby though because it doesn't appear as mature as IronPython. If it's close enough, I might go with that though. Any ideas? I know this has to be something simple.

  Read the article

• uploadify scriptData problem

  - by elpaso66

  Hi, I'm having problems with scriptData on uploadify, I'm pretty sure the config syntax is fine but whatever I do, scriptData is not passed to the upload script. I tested in both FF and Chrome with flash v. Shockwave Flash 9.0 r31 This is the config: $(document).ready(function() { $('#id_file').uploadify({ 'uploader' : '/media/filebrowser/uploadify/uploadify.swf', 'script' : '/admin/filebrowser/upload_file/', 'scriptData' : {'session_key': 'e1b552afde044bdd188ad51af40cfa8e'}, 'checkScript' : '/admin/filebrowser/check_file/', 'cancelImg' : '/media/filebrowser/uploadify/cancel.png', 'auto' : false, 'folder' : '', 'multi' : true, 'fileDesc' : '*.html;*.py;*.js;*.css;*.jpg;*.jpeg;*.gif;*.png;*.tif;*.tiff;*.mp3;*.mp4;*.wav;*.aiff;*.midi;*.m4p;*.mov;*.wmv;*.mpeg;*.mpg;*.avi;*.rm;*.pdf;*.doc;*.rtf;*.txt;*.xls;*.csv;', 'fileExt' : '*.html;*.py;*.js;*.css;*.jpg;*.jpeg;*.gif;*.png;*.tif;*.tiff;*.mp3;*.mp4;*.wav;*.aiff;*.midi;*.m4p;*.mov;*.wmv;*.mpeg;*.mpg;*.avi;*.rm;*.pdf;*.doc;*.rtf;*.txt;*.xls;*.csv;', 'sizeLimit' : 10485760, 'scriptAccess' : 'sameDomain', 'queueSizeLimit' : 50, 'simUploadLimit' : 1, 'width' : 300, 'height' : 30, 'hideButton' : false, 'wmode' : 'transparent', translations : { browseButton: 'BROWSE', error: 'An Error occured', completed: 'Completed', replaceFile: 'Do you want to replace the file', unitKb: 'KB', unitMb: 'MB' } }); $('input:submit').click(function(){ $('#id_file').uploadifyUpload(); return false; }); }); I checked that other values (file name) are passed correctly but session_key is not. This is the decorator code from django-filebrowser, you can see it checks for request.POST.get('session_key'), the problem is that request.POST is empty. def flash_login_required(function): """ Decorator to recognize a user by its session. Used for Flash-Uploading. """ def decorator(request, *args, **kwargs): try: engine = __import__(settings.SESSION_ENGINE, {}, {}, ['']) except: import django.contrib.sessions.backends.db engine = django.contrib.sessions.backends.db print request.POST session_data = engine.SessionStore(request.POST.get('session_key')) user_id = session_data['_auth_user_id'] # will return 404 if the session ID does not resolve to a valid user request.user = get_object_or_404(User, pk=user_id) return function(request, *args, **kwargs) return decorator

  Read the article

• What are some good/reputable/widely-used libraries written in VB.NET?

  - by Dan Tao

  Generally speaking, when VB.NET and C# are compared, there is a lot of strong support for C#, accompanied by some bashing of VB.NET until a respected developer comes along and acts as The Voice Of Reason, pointing out that while VB prior to VB.NET had its fair share of issues, VB.NET is really a very strong, fully OOP language that is, feature-wise, right about on par with C# (with the exception of certain things like a full-bodied lamba syntax [pre-VB10] or the yield keyword, as many C# faithfuls are quick to point out). I myself, having written plenty of code in both VB.NET and C#, fall squarely in the "I prefer C#, but don't consider VB.NET any less of a language" camp. However, one thing I have noticed is that when it comes to respected and/or widely-used libraries for .NET, everyting is written in C#. Or at least that's been my impression. This strikes me as a little strange because, aside from the abovementioned sprinkling of nice features (in particular the yield keyword), I tend to view the VB.NET/C# divide as primarily a matter of personal taste. Obviously, plenty of developers prefer C#. But I personally know some developers (good ones) who prefer VB.NET, which would lead me to suspect that surely some libraries (good ones) would be written in VB.NET. They must be out there, and I just haven't found them. What are some good libraries that've been written in VB.NET? The best would be open source, as that would allow interested developers to take a look at some good VB.NET code and see how effective the language can be when used properly. But I'd be interested to know about any libraries at all, particularly reputable ones.

  Read the article

• Html.DropDownListFor<> and complex object in ASP.NET MVC2

  - by dagda1

  Hi, I am looking at ASP.NET MVC2 and trying to post a complex object using the new EditorFor syntax. I have a FraudDto object that has a FraudCategory child object and I want to set this object from the values that are posted from the form. Posting a simple object is not a problem but I am struggling with how to handle complex objects with child objects. I have the following parent FraudDto object whcih I am binding to on the form: public class FraudDto { public FraudCategoryDto FraudCategory { get; set; } public List<FraudCategoryDto> FraudCategories { get; private set; } public IEnumerable<SelectListItem> FraudCategoryList { get { return FraudCategories.Select(t => new SelectListItem { Text = t.Name, Value = t.Id.ToString() }); } The child FraudCategoryDto object looks like this: public class FraudCategoryDto { public int Id { get; set; } public string Name { get; set; } } On the form, I have the following code where I want to bind the FraudCategoryDto to the dropdown. The view is of type ViewPage: <td class="tac"> <strong>Category:</strong> </td> <td> <%= Html.DropDownListFor(x => x.FraudCategory, Model.FraudTypeList)%> </td> I then have the following controller code: [HttpPost] public virtual ViewResult SaveOrUpdate(FraudDto fraudDto) { return View(fraudDto); } When the form is posted to the server, the FraudCategory property of the Fraud object is null. Are there any additional steps I need to hook up this complex object? Cheers Paul

  Read the article

• Reducing WPF binding boilerplate with styles - updating the bindings themselves via styling?

  - by Eamon Nerbonne

  I'm still learning the WPF ropes, so if the following question is trivial or my approach wrong-headed, please do speak up... I'm trying to reduce boilerplate and it sounds like styles are a common way to do so. In particular: I've got a bunch of fairly mundane data-entry fields. The controls for these fields have various properties I'd like to set based on the target of the binding - pretty normal stuff. However, I'd also like to set properties of the binding itself in the style to avoid repetitiveness. For example: <TextBox Style="{StaticResource myStyle}"> <TextBox.Text> <Binding Path="..." Source="..." ValidatesOnDataErrors="True" ValidatesOnExceptions="True" UpdateSourceTrigger="PropertyChanged"> </Binding> </TextBox.Text> </TextBox> Now, is there any way to use styling - or some other technique to write the previous example somewhat like this: <TextBox Style="{StaticResource myStyle}" Text="{Binding Source=... Path=...}/> That is, is there any way to set all bindings that match a particular selection (here, on controls with the myStyle style) to validate data and to use a particular update trigger? Is it possible to template or style bindings themselves? Clearly, the second syntax is much, much shorter and more readable, and I'd love to be able to get rid of other similar boilerplate to keep my UI code comprehensible to myself :-).

  Read the article

• Hidden Features of C#?

  - by Serhat Özgel

  This came to my mind after I learned the following from this question: where T : struct We, C# developers, all know the basics of C#. I mean declarations, conditionals, loops, operators, etc. Some of us even mastered the stuff like Generics, anonymous types, lambdas, linq, ... But what are the most hidden features or tricks of C# that even C# fans, addicts, experts barely know? Here are the revealed features so far: Keywords yield by Michael Stum var by Michael Stum using() statement by kokos readonly by kokos as by Mike Stone as / is by Ed Swangren as / is (improved) by Rocketpants default by deathofrats global:: by pzycoman using() blocks by AlexCuse volatile by Jakub Šturc extern alias by Jakub Šturc Attributes DefaultValueAttribute by Michael Stum ObsoleteAttribute by DannySmurf DebuggerDisplayAttribute by Stu DebuggerBrowsable and DebuggerStepThrough by bdukes ThreadStaticAttribute by marxidad FlagsAttribute by Martin Clarke ConditionalAttribute by AndrewBurns Syntax ?? operator by kokos number flaggings by Nick Berardi where T:new by Lars Mæhlum implicit generics by Keith one-parameter lambdas by Keith auto properties by Keith namespace aliases by Keith verbatim string literals with @ by Patrick enum values by lfoust @variablenames by marxidad event operators by marxidad format string brackets by Portman property accessor accessibility modifiers by xanadont ternary operator (?:) by JasonS checked and unchecked operators by Binoj Antony implicit and explicit operators by Flory Language Features Nullable types by Brad Barker Currying by Brian Leahy anonymous types by Keith __makeref __reftype __refvalue by Judah Himango object initializers by lomaxx format strings by David in Dakota Extension Methods by marxidad partial methods by Jon Erickson preprocessor directives by John Asbeck DEBUG pre-processor directive by Robert Durgin operator overloading by SefBkn type inferrence by chakrit boolean operators taken to next level by Rob Gough pass value-type variable as interface without boxing by Roman Boiko programmatically determine declared variable type by Roman Boiko Static Constructors by Chris Easier-on-the-eyes / condensed ORM-mapping using LINQ by roosteronacid Visual Studio Features select block of text in editor by Himadri snippets by DannySmurf Framework TransactionScope by KiwiBastard DependantTransaction by KiwiBastard Nullable<T> by IainMH Mutex by Diago System.IO.Path by ageektrapped WeakReference by Juan Manuel Methods and Properties String.IsNullOrEmpty() method by KiwiBastard List.ForEach() method by KiwiBastard BeginInvoke(), EndInvoke() methods by Will Dean Nullable<T>.HasValue and Nullable<T>.Value properties by Rismo GetValueOrDefault method by John Sheehan Tips & Tricks nice method for event handlers by Andreas H.R. Nilsson uppercase comparisons by John access anonymous types without reflection by dp a quick way to lazily instantiate collection properties by Will JavaScript-like anonymous inline-functions by roosteronacid Other netmodules by kokos LINQBridge by Duncan Smart Parallel Extensions by Joel Coehoorn

  Read the article

< Previous Page | 245 246 247 248 249 250 251 252 253 254 255 256  | Next Page >