Search Results

Search found 2154 results on 87 pages for 'bios'.

Page 25/87 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Enable VT-x in HP 8300 elite

  - by lang2

  I have a HP 8300 elite (Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz). I'm trying to run a virtual machine via VirtualBox. But every time I start the VM, it says: VT-x is disabled in the BIOS. (VERR_VMX_MSR_VMXON_DISABLED). My lscpu output is like this: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 On-line CPU(s) list: 0-7 Thread(s) per core: 2 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 58 Stepping: 9 CPU MHz: 1600.000 BogoMIPS: 6784.74 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 8192K NUMA node0 CPU(s): 0-7 I went into the BIOS but the things the can be tweaked is very limited and I couldn't find the VT-x setting. Anybody know how to do this in this setup?

  Read the article

• How yo set up a Sony Vaio PCG-4121EM 3G modem?

  - by Ivan

  We've bought a Sony Vaio PCG-4121EM supposed to have a built-in 3G modem. It has a SIM-card slot at its bottom. We've inserted a newly-bought SIM-card but nothing happened and the modem is still not visible among the computer devices (neither in Windows device manager nor in "Modems" Control Panel applet). How to turn it on? I would usually seek to turn a built-in device in the BIOS setup, but there seem to be no BIOS setup on this Vaio - Windows 7 splash screen appears immediately as I turn the computer on.

  Read the article

• Windows Boot Manager, linking a 'device' to boot linux

  - by TheCompander

  I'm attempting to boot linux on a UEFI-GPT machine with a Windows Boot Manager (WBM). So far I have installed Archlinux (Arch) with Grub. The grubx64.efi is successfully on my windows boot partition and I can see the option to use it in UEFI-BIOS, selecting this loads grub and I'm able to get into Arch fine. I have noticed that in the Windows Boot Manager, selecting from the splash screen, 'Change defaults or choose other options' 'Choose other options' 'Use a device', shows the boot options as in UEFI-BIOS, in my case grub shows as 'Linux'. Selecting 'Linux' reboots the computer and loads grub then Arch. Is there anyway to use this entry for the device 'Linux' to show directly on the WBM splash screen under the entry for Windows 8.1? Ideally i'd like the 'Arch Linux' to link to the 'Linux' device. Guidance with bcdedit appreciated, thanks in advance.

  Read the article

• Clean up infected computer from viruses

  - by ripper234

  I have a computer which had AVG Free installed from day one. After several months of operation, it starts detecting viruses and trojans all the time. Besides running a full scan, what should I do to clean the computer? Should I install another anti-virus or anti-malware tool (can it help?), or once viruses infect a system the only real solution is a clean format? (Lately I've heard of viruses that burn themselves in the BIOS, so a clean format might not always work ... how common is this technique? Should I burn a fresh BIOS as well?)

  Read the article

• eSATA hotswap using Jmicron JMB363 controller

  - by Stephen

  I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

  Read the article

• Restore XP on Acer Aspire One netbook

  - by Imran

  I have an Acer Aspire One D250 netbook which came with Windows XP (but no CD) on which I have since installed Xubuntu 9.10. Now I am trying to sell it, but I cannot find a way to recover XP. I have read in a lot of different places that holding Alt+F10 during boot should send me to a recovery menu (which will allow me to restore XP from a "secret partition"), but I have tried many times to no avail. The best I can do is get the BIOS setup screen by holding F2, but there doesn't seem to be any recovery option there. After the initial option to go into the BIOS setup GRUB starts loading and there don't seem to be any more opportunities to enter a system setup screen. Please help!

  Read the article

• dell poweredge 860 always pxe boot

  - by Berto

  Hi, We bought a dell poweredge 860, and installed windows server 2008 std. So far so good. Now everytime the server reboots, it try's the pxe boot, and hangs on "cant find pxe bootable, press f1 to continue or f2 to setup". Now, i tried all the settings in the bios (it's the latest - A05), i have the nic active without pxe (i also tried with the nic off)... well, i tried everyting off and on the bios and it still goes to pxe booting. I have one sata drive, that is boot's after the f1. I would like to keep the system updated, but i can't because of the reboot, can someone point me to some direction? Can i give any more information of the server? If yes, what do you want? It has been a week on google trying to figure out this one. Thx

  Read the article

• "Error loading operating system": Win7/Vista

  - by LookitsPuck

  Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

  Read the article

• Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

  - by Code Sherpa

  I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

  Read the article

• Serial number not found, copy of Windows not genuine

  - by sara

  I have an HP-G71-340US notebook that I purchased 11/29/09. When I power it up, a black screen comes on that shows "serial number not found" and it also says that my copy of Windows 7 Home Basic is not genuine – but my computer came with Windows 7 Home Premium. In BIOS, my serial number is not shown either and I did pull out the little battery to reset it which allowed me to bypass the suddenly new locked BIOS that needed a password to enter. I'm sure this is a masterpiece created by my 6 or 9 yr old child while trying to play on my laptop. Can I fix these two problems?

  Read the article

• Ubuntu not showing disk

  - by ojek

  I have a laptop which had broken windows 7 installed on it. I created a ubuntu live usb and tried installing ubuntu over that win7. After a few minutes, I got an error message, so I needed to restart the computer. Now the laptop says that there is no bootable device - reasonable message given that there was an error during linux installation. But: Bios can see my hard drive, When I start ubuntu in live mode, and try either sudo fdisk -l or gparted, it doesn't show any hard disk drives. I am 90% sure that hdd is broken, but it is wierd that bios can see it, and ubuntu doesn't. How can I be 100% sure about that hdd? Is there any additional way of detecting my hdd from ubuntu?

  Read the article

• HP Envy webcam pictures all purple

  - by kousen

  I have a new HP Envy 15 with an integrated webcam, running Win 7. It works, but all the images are purple, suggesting to me that the red and blue guns are working, but the green isn't. The problem shows up on both their own software and on Skype. I talked to tech support, and they had me update the BIOS, reinstall the hardware BIOS for the webcam, and update the webcam software. It therefore sounds like a hardware problem, but they won't back that unless I do a full restore, which would wipe my disk of all the software I've spent the last couple of weeks configuring. Is there anything else I can try? Other than just buying another webcam, I mean. Any suggestions would be appreciated.

  Read the article

• Cannot boot from windows 7 DVD

  - by webnoob

  Hi All, I have just purchased windows 7 64bit. I entered the disk in the drive and it told me I couldn't upgrade as I am using XP so I have tried to boot from CD instead but it doesn't work. It seems to look at the disk for a few seconds and then ends up at a screen saying windows failed to start and then I hit enter and it loads windows XP again. Does anyone know what could cause this? Here is my system info: Time of this report: 4/15/2010, 18:11:39 Machine name: MYCOMP Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: OptiPlex 755 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09 Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs) Memory: 3316MB RAM Page File: 568MB used, 4631MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.5512 32bit Unicode

  Read the article

• Cannot boot from windows 7 DVD

  - by webnoob

  Hi All, I have just purchased windows 7 64bit. I entered the disk in the drive and it told me I couldn't upgrade as I am using XP so I have tried to boot from CD instead but it doesn't work. It seems to look at the disk for a few seconds and then ends up at a screen saying windows failed to start and then I hit enter and it loads windows XP again. Does anyone know what could cause this? Here is my system info: Time of this report: 4/15/2010, 18:11:39 Machine name: MYCOMP Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216-1514) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: OptiPlex 755 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A09 Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz (2 CPUs) Memory: 3316MB RAM Page File: 568MB used, 4631MB available Windows Dir: C:\WINDOWS DirectX Version: DirectX 9.0c (4.09.0000.0904) DX Setup Parameters: Not found DxDiag Version: 5.03.2600.5512 32bit Unicode

  Read the article

• Why my laptop doesnt boot in any OS (windows or ubuntu) after RAM upgrade?

  - by qrsq

  My laptop previously had 2 slots of RAM ( 1x1Gb , 1x2GB , both were clocked at 1066mhz) and it was working on windows 7 x86 OS. I Upgraded the ram with ( 2x4GB clcoked at 1333mhz). Bios displayed 8192MB of memory and windows was working ok but (only 2.99GB of ram from 8gb was avabile). So i decided to switch to an x64 system to be able to use all the amount of memory. But the laptop wasnt able to install any os (windows 7 x64 or windows 8 x64) so i placed the 3gb of ram instead of 8gb. Then i succesfully instaled an x64 os (windows 8). After than i placed the 8gb ram back again. Now the computer doesnt boot in the os but bios is working normally. I tried also to install ubuntu , without any succes. What should i do ?? All the help will be appreciated. thanks

  Read the article

• Impossible to create/format install window 7 on unpartioned HD

  - by fra pet

  Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

  Read the article

• super slow WINDOWS 7 installation on asus p5q se plus

  - by dasko

  am i missing something obvious in the bios as this is not normal at all.

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• IP KVM switch, or serial console box for remote admin?

  - by grahzny

  We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

  Read the article

• Freezing with black screen after booting OS with AMD Catalyst driver

  - by Oleg

  I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

  Read the article

• ThinkPad T400 backlight doesn't always turn on when booting from battery

  - by srunni

  I have a Lenovo ThinkPad T400, which I've owned for about a year. A while back, I noticed a problem in which the LED backlight would not always turn on when booting from battery. Usually, if I hold the power button down until the BIOS screen shows up, the backlight turns, but sometimes even that doesn't work. If I just press the power button and let it go right away, the backlight usually doesn't turn on. This happens before the OS (I dual-boot Linux and Windows) gets a chance to boot - the BIOS screen itself is displayed without the backlight if it fails to turn on, so the problem isn't at the OS level. Any ideas? Thanks!

  Read the article

• Windows 7 installation asks for DVD drivers

  - by koen

  I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

  Read the article

• Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

  - by Casey

  I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

  Read the article

• PERC 5/i Enable alarm on disks failures

  - by Andy M

  I'm trying to enable one the alarm of my server's raid controller PERC 5/i. Using this documentation, under the chapter Audible Alarm Warnings, it's explained that enabling an audible alarm is allowed in order to quickly spot failures on my hard disks. My trouble is that when entering the disk controller configuration (Ctrl+R at boot time), I'm able to set up lot of things but I cannot navigate to Enable Audible Alarm. I have : Enable Controller BIOS Enable Alarm Enable BIOS stop on Error I can navigate with my arrow keys to both the first and third items, but I cannot navigate to or select the second! It's not greyed out, and seems like I should be able to select go on this entry, but my cursor keep skipping it. Any ideas about what I'm missing here?

  Read the article

• "Error loading operating system": Win7/Vista

  - by LookitsPuck

  Hey fellas, Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >