Search Results

Search found 1614 results on 65 pages for 'emps (expensive managemen'.

Page 25/65 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Thinking about buying a LG 30" monitor

    - by evan
    I'd love to get http://www.newegg.com/Product/Product.aspx?Item=N82E16824005115 but I'm wondering if I should hold out until more LED monitors are on the market. I love really like the brightness of the 27" imac monitor and the above monitor is only rated at 5 cd/m2 less than that monitor, but wouldn't a back lit monitor appear to be much brighter than an LCD monitor? Does anyone know how the above monitor compares to the 27" imac monitor? Why are Apple monitors in general so much more expensive than other monitors - just the brand name? I must be confused about how to read the specs? Thanks in advance for your input!

    Read the article

  • Super-silent (mid tower) case and fan combo

    - by Dennis G.
    I want to build a HTPC for music/video/blu-ray playback (no gaming). I don't need an expensive HTPC case but just want to go with a standard medium tower case. However, I want it to be super silent so it doesn't make any annoying fan/disk noises when I watch movies. Ideally, it shouldn't make any noticeable noise at all. I understand that choosing a board, CPU and graphic card that run cool and don't consume a lot of power is important for designing a quiet machine, and I think I got that covered. However, there are so many choices in regards to cases, fans and power supplies that it's hard to get started. What are your recommendations for a case/fan (cpu+case)/power supply combination that run absolutely silent and can cool a standard Intel system with a low-power (possibly passively cooled) graphic card? I'm usually a fan of Antec cases, would an Antec Mini P180 be a good starting point? If so, which case fans, CPU fan and power supply would you recommend?

    Read the article

  • alternatives to altaris/symentec SVS

    - by The Journeyman geek
    I use an old copy of altaris SVS (link to lifehacker - symentec gutted the old altaris website) for testing applications - it lets me capture the changes one executable makes, or changes to a whole system into a bundle, and remove the whole bundle once i'm done. However symentec bought over altaris and apparently killed off the product, or merged it into some other bigger product. I'd like the same fine grained control SVS had, something that just does this, and preferably free (for personal use) or not too expensive. I'd like this to run on at least windows XP 32 bit, but windows 7 and 64 bit support would be nice too

    Read the article

  • How to extend Wi-Fi signal across rooms?

    - by Sriram Krishnan
    I moved into a new place and my old Wi-Fi router just doesn't have the range to get into all the rooms. I've been investigating a lot of options and I'm wondering what other folks have done here. Moving the current location of my primary Wi-Fi router is not an option thanks to our cable provider and our landlord. Buy a bigger, beefier router (seems expensive). If so, should I go for one of those draft 802.11n ones to avoid microwave/other Wi-Fi router interference? Set up a router with DD-WRT as a repeater Leech the neighbors' open Wi-Fi access point. Alright, I was kidding about the last one but I'm genuinely curious as to what my best option is.

    Read the article

  • Get IP network range after reverse DNS?

    - by Max
    For analytics purposes, I'm looking at large sets of IP addresses in server log files. I'm trying to perform reverse-DNS lookups to understand where traffic is coming from - e.g. what percentage of IPs resolve to corporations, schools, government, international etc. Despite a bunch of optimizations, individually reverse-DNS'ing every IP address still appears to be fairly expensive though. So - is there any way to obtain an entire range of IPs from a reverse-DNS? If yes, this could greatly reduce the number of actual reverse-DNS lookups. Example (numbers slightly obfuscated): Log file contains a request from an IP 128.151.162.17 Reverse DNS resolves to 11.142.152.128.in-addr.arpa 21599 IN PTR alamo.ceas.rochester.edu (So this is a visitor from Rochester University, rochester.edu) Now, would it be safe to assume that all at least all IPs from 128.151.162.* will also resolve to rochester.edu? What about 128.151.*.*? Is there a way to get the exact IP range?

    Read the article

  • Can a Mini DisplayPort to HDMI cable support resolutions above 1920x1200?

    - by cnst
    Is it theoretically possible for a cheapo Mini DisplayPort to HDMI cable or adapter to support resolutions above 1920 × 1200, e.g. 2560 × 1440 (QHD)? Or is it always electrically-equivalent to a single-link DVI, and such resolutions above 1920×1200 are out of the question? From empirical evidence, I've tried out some rather expensive brand-name adapter from a local Apple dealer that was marked as HDMI 1.3 compliant with my mid-2013 MacBook Air (5000) and also with X230 (4000), and a QHD monitor, but was only getting a maximum of FHD resulution through such an arrangement.

    Read the article

  • Why Buy Hardrives with storage server from a vendor?

    - by Mark
    Hi all, Im just browsing around at storage server's like the Dell MD100/ MD3000 and the Sun J4200 and although the storage server seems reasonable (approx $3000-$4000 AUD) the hard-drives that you buy to go along with them seems exorbitantly expensive. And I'm not sure why. Surely at most they are using good quality RAID level 7200rpm SATA hdd, but even then they are still charging almost 4 times the price. What is the advantage to buying these from them. I can see if one fails then the vendor replacing it is convenient. But at that price you could buy double the amount of hdd and just claim on warranty directly with the manufacturer. It would be much cheaper and you wouldn't be relying on someone else to fix your problems. Is this the case of "you don't get fired if you buy IBM?" mentality or is there some reason I'm not grasping here? Cheers Mark

    Read the article

  • Batch OCR for many PDF files (not already OCRed) ?

    - by David
    Hello, I use Google Desktop Search (I am on Vista) and not all my PDF files are recognized in my archive folder. It is normal as "PDF files that contain scanned images" are not indexed (http://desktop.google.com/support/bin/answer.py?hl=en&answer=90651) So I would like to OCR many of my PDF files that are not already OCRed. My goal : I give the program a folder and it search alone in the subfolders the PDF files that need to be converted into PDF-OCRed files. Note: In the past, if a PDF file was password protected, I removed the password with another batch (paying) tool: verypdf.com "pwdremover" Any (not too much expensive) idea ? I already tried : Finereader 6 pro on xp at the time, but there was no batch processor included... Paperfile paperfile.net which uses Tesseract code.google.com/p/tesseract-ocr/. But the OCR is only PDF to text, not PDF to PDF! There is also another project code.google.com/p/ocropus Thanks in advance ;)

    Read the article

  • Drawbacks of installing linux on usb stick?

    - by Znarkus
    I am setting up a router/nas/http/whatever server based on an ION mini-ITX board. I've installed Ubuntu Server on an old 160 GB drive, but it generates a lot more heat and vibrates more than my other new drive (storage). It just doesn't fit the concept, and worse: it takes up a SATA port. As SSD's are crazy expensive I'm thinking of buying an extra 4 GB USB stick, and raid0 it. From my point of view, these are the pros/cons: Pros Low power consumption No vibrations No heat Smaller Get to buy new, larger USB stick (:D) Cons Shorter life time Slower Raid 0 More work maintaing/installing? I think the pros overweighs the cons. Shorter life time and raid 0 is countered by regular backups of the configs/settings. Slower is partially countered by raid 0, and I don't know about the last one. What do You think? Experience? Another solution?

    Read the article

  • Can't change Hyper Terminal Hardware Settings

    - by Tim
    Anyone here any good with Hyperterminal? Am having a nightmare trying to use it at work to update our telephone extensions. The company who supply our PABX box have told me that XP does strange things to Hyperterminal and that I should use Win2k. Which I did with the same result. I have narrowed the problem dowwn to the Hardware Settings for the connection in Hyper Terminal. No matter what I set (and I need 7E1) it defaults back to 8N1. Has anyone seen this behaviour before and know of a simple way around it? (Apart from buying a more expensive commercial version of Hyper Terminal, as suggested by our support people). Edit: I should point out I have to connect via a phone line so a direct serial connection is not an option. Cheers Tim

    Read the article

  • pthread-stubs for CentOS

    - by Rodnower
    Hello, I try to install Mesa 7.8 for CentOS 5. During installation of Mesa I required to install librdm, and during librdm (v. 2.4.19) installing I got error about missing pthread-stubs: checking for PTHREADSTUBS... configure: error: Package requirements (pthread-stubs) were not met: When I try: yum provides *pthread-stubs* I get nothing In other place I found that libxcb-devel is what I need, but yum not find this too. During searching in Google, I found rpm's for Fedora only. Any one know whether there is some packege which provides pthread-stubs for CentOS, or other, less expensive way to install Mesa? Thank you for ahead.

    Read the article

  • Non-Apple RAID card for Mac PRO (TOWER)

    - by Arthor
    I have the following: MAC PRO (Model Number: A1186) (PCIe - SLOTS) At present I am using the software RAID however I wish to move to the hardware raid because of the following: Performance (4 x 300gb SATA II in RAID 5) Redundancy (Raid 5, 1 drive can fail and system will be online) I do not wish to use the Apple RAID card (very expensive), I would like to use an aftermarket one which is cheaper. Questions: Does anyone have a WORKING aftermarket RAID card working in their MAC PRO (TOWER)? -(Have done some research, ROCKETRAID, need confirmation) If so to the above, does it work from boot? Thanks

    Read the article

  • sniffing on a switched LAN

    - by shodanex
    Hi, I often find myself in the position of having to sniff on a connection between for example an arm board I am developing on, and another computer on the network, or out of the network. The easy situation is when I can install a sniffer on the computer talking to the embedded device. When it is not possible, I currently install an old 10Mb/s HUB. However I am afraid my HUB might stop working, and I would like to know some alternative. Here are the alternatives I could think of : Buy another HUB. Is that still possible ? Have some sort of ethernet sniffing bridge, like what they do for USB. I am afraid this kind of device is expensive. use ARP poisoning.

    Read the article

  • Comparison between these video cards?

    - by seedeg
    Currently I have a GeForce 8600GT as a video card. I started playing EVE online and it is not that smooth (Apart from the fact that my Windows 7 is starting to become slow so it needs a format). Now I have these 3 video cards on my mind: 1GB Gainward GF GT240 PCI-Express Video Card 1GB Gainward GF9800GT PCI-Express Video Card 1GB Gainward GF GT240-GS PCI-Express Video Card I tried comparing them from nvidia's site: HelpMeChoose but the GT240-GS is not available for comparison. However, when I tried comparing the GT240 with the 9800GT, the latter was the winner. You must keep in consideration that the cheapest one is the GT2400. The 9800GT is in the middle, and the one which is not available for comparison, the GT240-GS is the most expensive one (about 6 euros more than the 9800GT). Is the GT240-GS the best video card from these? Thanks in advance for your responses.

    Read the article

  • Collaborative data modelling software?

    - by at01
    I'm trying to find a tool where a lot of people can work on a data model collaboratively. Embarcadero has a an ER application called ER/studio which apparently comes with a repository system that acts like typical version control software. That sounds great except ER/studio is expensive and this is a non-profit and open source organization where we encourage members to even contribute small changes. What's the best solution? Either downloadable software or a web service would work. We don't mind paying, but the cost can't go up with the number of participants...

    Read the article

  • Samba4 advice for production use

    - by pgb
    I have an old Samba 3 + LDAP server installed that needs to be rebuilt. I'm weighting my options, and Windows Server seems too expensive at the moment, and Samba 4 appeared to be a nice option, coupled with the last Bind 9 that can dynamically add the computers to the DNS. I have about 30 workstations, so I still consider it a small network. My questions are: Is Samba 4 stable enough for production? It seems as if the Samba team is too cautious on when to call their version final, or even beta, as compared with other open source projects. What Linux distribution would you recommend to set it up? I usually use Ubuntu Server, but may use another one if installing / maintaining Samba 4 is better on that one.

    Read the article

  • redirect all youtube video requests to a specific one

    - by iTayb
    I'm on an IT team in my company and I would like to block youtube to users. I don't want to just deny access to the whole youtube domain, but only to replace the .flv/.mp4 request with the one that I want. That way, if someone tries to watch youtube videos on the network, He'll get a video of why using our expensive bandwidth for pleasure is a no-no. I thought about using a packet manipulation program and just replace the video ID with something that I want, but I didn't manage to do it right.

    Read the article

  • Microsoft Outlook x Lotus Notes in enterprise environment

    - by Ladislav Mrnka
    I'm working in company (several thousands client computers) using tools like MS Outlook + Exchange + Sharepoint + Communication server. Now our mother company shared the idea that everything should be moved to IBM Lotus Notes + Domino. The reason for this is that Outlook based solution is too expensive (it is the official statement even they don't want to replace MS Office yet). Other reason probably is that they received a lot of licences for Lotus when they bought IBM servers to new data center. My question is: Is this reasonable change or is it just some management game and IBM's marketing? Will it really save money? Other question: Is Lotus better then MS solution? This is serious question, it is not mentioned to open any kind of flame war. I just don't believe the decission and I have never used Lotus tools.

    Read the article

  • Backup software for Windows Server 2008 R2 Enterprise with 4 virtual machines (Exchange, SQL, AD, SharePoint)

    - by MadBoy
    What are the options for backup software for: HOST - Windows Server 2008 R2 Enterprise with HyperV VIRTUAL - Windows Server 2008 R2 Enterprise with Exchange 2010 VIRTUAL - Windows Server 2008 R2 Enterprise with SQL Express / SharePoint VIRTUAL - Windows Server 2008 R2 Enterprise with Terminal Services (10 users working on it) VIRTUAL - Windows Server 2008 R2 Enterprise with AD/DNS What I'm looking at is possibility of having an offsite backup thru FTP, maybe copy to usb/esata/lan drives for easy taking backup data outside of company. What I've been looking at: - Symantec Exec Backup 2010 System Recovery has an offsite backup but I would need 5 licenses and it doesn't have granular recovery. - Symantec Exec Backup 2010 seems OK but a bit expensive - Microsoft DPM 2010 requires full SQL Standard and for each machine I would need 4 Enterprise licenses. But does it allow Offsite backup without need for additional license and server outside of company (for doing DPM backup of DPM). What other options? This is 10 people company and so the costs matter but also convenience and security. Offsite backup is requirement.

    Read the article

  • Renting linux server just to make backups of my personnal data ?

    - by Matthieu
    Hi all, I would like to be able to backup ALL my computers data on a Linux server. For now, I have a home server, but soon I will be travelling, without home (so no home server). I was thinking of renting a dedicated linux webserver, but this is expensive, and I don't need a fast machine "web-oriented" with mysql server and all, I just need a full SSH access (full control, and then I install my programs). Does "backup servers" exist ? Am I doing it wrong (maybe that is not a good solution) ? Note : I run Mac OS, Windows and Linux, I backup through rsync, I want full control on my backup, not an automated "magic" backup like MobileMe or anything like that. Edit : I need around 500Gb storage

    Read the article

  • What is the best OS for a server hosting a simple Ruby on Rails based pastebin

    - by Koning Baard XIV
    I have created a simple pastebin in Ruby on Rails and Python. I want to host it in an intranet and it will have like about 1000 users. I want to use one Apache server with a cluster of Mongrel servers. The server itself is a 2 GHz Intel Centrino with 2 GB RAM. What do you think is the best OS to host this? I thought about Damn Small Linux or a custom LFS system. Ubuntu servers come with loads of stuff I don't need. Maybe there are some better OSes? It must be capable of: Running Apache Running Ruby Running Python Running Mongrel with Ruby on Rails SSH Can anyone reccomend me one? Thanks. PS: I am not going to run Windows Server or Mac OS X Server (Mac's are expensive).

    Read the article

  • Need decent undelete utility for Windows

    - by Michael Chermside
    So I get the phone call from a friend or relative or client: "Looks like I accidentally deleted 4 years worth of accounting data. Oh, and I don't have any backups. Can you help?" What I need is a good Windows tool (for NTFS I think) that scans blocks marked as deleted and attempts to recover the file. And I need one that can be run from a thumb drive or since installing new software has a decent chance of overwriting the data before it can be recovered. Googling for such tools turns up mostly carefully-crafted advertisements for moderately expensive products with a "Free! Demo! Version!" which is not exactly reassuring. Any recommendations for a good tool?

    Read the article

  • Google Chrome appears to hijack default browser

    - by Russsell Feldman
    I read all the advice on how to make Firefox or IE for windows 7 the default browser. I know how to do this but the problem is whenever a program tries to open a page through the default browser it will default to Google Chrome and when I uninstalled Google Chrome then programs like Yahoo Messanger (getting a profile) would fail looking for chrome. I don't think Google would do this sort of thing "HiJack a Default Browser" I'm convinced it must be a trogen or virus or a registery hack. If so any ideas how I would go about fixing this without purchasing every virus/trogen program until it WAS removed This method could be an expensive fix. Thank you Russell Feldman

    Read the article

  • How do I host multiple SSL websites on a single EC2 instance using Amazon Elastic Load Balancers?

    - by Developr
    If I have 3 separate websites which all require SSL (separate certificates) that I want to host on the same EC2 instance(s) across multiple availability zones so that we have the ability to scale and be highly available, how do I achieve this using ELBs in my Amazon VPC? Each site requires a separate IP address, so I have added multiple private IPs to the EC2 instance, but I am unsure how to bind the ELB to a certain IP on the instance. I was also able to setup multiple ELB pointing to the same instance, but again, I am not seeing any way to bind each ELB to a separate IP on the instance. If this is not possible, what is the best option? Run each site on a separate EC2 instance / ELB combo (expensive and harder to maintain) Give each site a separate public IP and use Route 53 to do the load balancing (seems like a hack) Use a different load balancer option such as HAProxy that should be able to work like a normal load balancer appliance. Please help!

    Read the article

  • Linux stretch cluster: MD replication, DRBD or Veritas?

    - by PieterB
    For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >