Search Results

Search found 21884 results on 876 pages for 'external address'.

Page 25/876 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Can I recover data from external HDD or do I format and lose it all?

  - by Col

  I have a Maxtor external HDD 500GB but haven't used it for a year or so. I have plugged it into a new laptop as the one I used it with before is busted. I know that there is a ton of data on the HDD that I would love to have the use of - mostly family and friends photos to be honest. But when I click on the HDD in Windows Explorer the only option I am given is to reformat the drive and lose the data. I'd be grateful if anyone could tell me if there is a way to get the data off the external drive before formatting it and losing it all.

  Read the article

• Is there a limit of max. number of files in external hard drive folder?

  - by tfs

  I have a FAT32 external hard drive where I keep backups downloaded from webserver. I have a directory with 30 subdirectories. One of the subdirectories contains 21381 files and when I try to copy more files into this directory I get 0x80070052 error. However,it's possible to copy one more file in this directory (only one) if I make it's name shorter (8 characters instead of 22 as it's original name). How do I solve this problem? Now I can not synchronize external hard disk files with server files which is very important for me.

  Read the article

• Win7 not detecting external HDD but Ubuntu is detecting. Why?

  - by unlimit

  I have a 500GB Toshiba external HDD. Since yesterday Windows 7 stopped detecting it, however I do see it listed on the "Safely remove hardware and eject media" icon on the taskbar. Then I tried the same external HDD on my Ubuntu and it detected it just fine. Ubuntu and Windows 7 are on the same laptop. I have dual boot. Can someone tell me why is it happening? Am I missing a driver in Windows 7? Additional info: 1. This drive has worked perfectly fine in the past. 2. I did not format this drive ever. 3. It just stopped working yesterday in windows.

  Read the article

• Windows 7 not detecting external hard drive but Ubuntu is detecting. Why?

  - by unlimit

  I have a 500 GB Toshiba external hard drive. Since yesterday Windows 7 stopped detecting it, however I do see it listed on the "Safely remove hardware and eject media" icon on the taskbar. Then I tried the same external hard drive on my Ubuntu and it detected it just fine. Ubuntu and Windows 7 are on the same laptop. I have dual boot. Can someone tell me why is it happening? Am I missing a driver in Windows 7? Additional info: This drive has worked perfectly fine in the past. I did not format this drive ever. It just stopped working yesterday in windows.

  Read the article

• Extract tar with multiple tars inside?

  - by Andrew Fashion

  Is there a way to untar a file with multiple tars inside? It's suppose to just untar everything inside including untarring the tars inside the tar... With windows it does it, quite annoying I can't figure it out on linux... Here is what I am doing: # tar -xvf socialengine4.0.5p1.tar core-base-4.0.5.tar core-install-4.0.7.tar external-autocompleter-4.0.0.tar external-calendar-4.0.1.tar external-chootools-4.0.3.tar external-fancyupload-4.0.1.tar external-firebug-4.0.0.tar external-flowplayer-4.0.0.tar external-moocomet-4.0.0.tar external-moocrop-4.0.0.tar external-moolasso-4.0.0.tar external-mootools-4.0.2.tar external-mootree-4.0.0.tar external-open-flash-chart-4.0.0.tar external-smoothbox-4.0.0.tar external-swfobject-4.0.0.tar external-tagger-4.0.2.tar external-tinymce-4.0.2.tar library-engine-4.0.5.tar library-facebook-4.0.0.tar library-ofc-4.0.0.tar library-pear-4.0.1.tar library-scaffold-4.0.3.tar module-activity-4.0.5p1.tar module-announcement-4.0.3.tar module-authorization-4.0.5.tar module-core-4.0.5.tar module-fields-4.0.5p1.tar module-invite-4.0.3.tar module-messages-4.0.5.tar module-network-4.0.5p1.tar module-storage-4.0.4.tar module-user-4.0.5.tar widget-rss-4.0.2.tar widget-weather-4.0.0.tar changelog.html [root@D18634 se4]# ls -l total 36980 -rw-r--r-- 1 1000 1000 27188 Oct 8 15:39 changelog.html -rw-r--r-- 1 1000 1000 359424 Oct 8 16:13 core-base-4.0.5.tar -rw-r--r-- 1 1000 1000 1122304 Oct 8 16:13 core-install-4.0.7.tar -rw-r--r-- 1 1000 1000 38400 Oct 8 16:13 external-autocompleter-4.0.0.tar -rw-r--r-- 1 1000 1000 100352 Oct 8 16:13 external-calendar-4.0.1.tar -rw-r--r-- 1 1000 1000 31232 Oct 8 16:13 external-chootools-4.0.3.tar -rw-r--r-- 1 1000 1000 66560 Oct 8 16:13 external-fancyupload-4.0.1.tar -rw-r--r-- 1 1000 1000 85504 Oct 8 16:13 external-firebug-4.0.0.tar -rw-r--r-- 1 1000 1000 216576 Oct 8 16:13 external-flowplayer-4.0.0.tar -rw-r--r-- 1 1000 1000 11776 Oct 8 16:13 external-moocomet-4.0.0.tar -rw-r--r-- 1 1000 1000 16384 Oct 8 16:13 external-moocrop-4.0.0.tar -rw-r--r-- 1 1000 1000 27648 Oct 8 16:13 external-moolasso-4.0.0.tar -rw-r--r-- 1 1000 1000 1445376 Oct 8 16:13 external-mootools-4.0.2.tar -rw-r--r-- 1 1000 1000 45568 Oct 8 16:13 external-mootree-4.0.0.tar -rw-r--r-- 1 1000 1000 330240 Oct 8 16:13 external-open-flash-chart-4.0.0.tar -rw-r--r-- 1 1000 1000 43008 Oct 8 16:13 external-smoothbox-4.0.0.tar -rw-r--r-- 1 1000 1000 18432 Oct 8 16:13 external-swfobject-4.0.0.tar -rw-r--r-- 1 1000 1000 19968 Oct 8 16:13 external-tagger-4.0.2.tar -rw-r--r-- 1 1000 1000 5711360 Oct 8 16:13 external-tinymce-4.0.2.tar -rw-r--r-- 1 1000 1000 1230848 Oct 8 16:13 library-engine-4.0.5.tar -rw-r--r-- 1 1000 1000 28672 Oct 8 16:13 library-facebook-4.0.0.tar -rw-r--r-- 1 1000 1000 125952 Oct 8 16:13 library-ofc-4.0.0.tar -rw-r--r-- 1 1000 1000 1715200 Oct 8 16:13 library-pear-4.0.1.tar -rw-r--r-- 1 1000 1000 340480 Oct 8 16:13 library-scaffold-4.0.3.tar -rw-r--r-- 1 1000 1000 354304 Oct 8 16:13 module-activity-4.0.5p1.tar -rw-r--r-- 1 root root 327680 Jan 8 02:37 module-albums-4.0.5.tar -rw-r--r-- 1 1000 1000 80896 Oct 8 16:13 module-announcement-4.0.3.tar -rw-r--r-- 1 1000 1000 147456 Oct 8 16:13 module-authorization-4.0.5.tar -rw-r--r-- 1 1000 1000 2643968 Oct 8 16:13 module-core-4.0.5.tar -rw-r--r-- 1 root root 665600 Jan 8 02:37 module-events-4.0.5.tar -rw-r--r-- 1 1000 1000 377344 Oct 8 16:13 module-fields-4.0.5p1.tar -rw-r--r-- 1 root root 501760 Jan 8 02:37 module-forum-4.0.5p1.tar -rw-r--r-- 1 1000 1000 81408 Oct 8 16:14 module-invite-4.0.3.tar -rw-r--r-- 1 1000 1000 147968 Oct 8 16:14 module-messages-4.0.5.tar -rw-r--r-- 1 1000 1000 111616 Oct 8 16:14 module-network-4.0.5p1.tar -rw-r--r-- 1 1000 1000 99840 Oct 8 16:14 module-storage-4.0.4.tar -rw-r--r-- 1 1000 1000 844288 Oct 8 16:14 module-user-4.0.5.tar -rw-r--r-- 1 root root 18094080 Jan 8 02:40 socialengine4.0.5p1.tar -rw-r--r-- 1 1000 1000 12288 Oct 8 16:14 widget-rss-4.0.2.tar -rw-r--r-- 1 1000 1000 13824 Oct 8 16:14 widget-weather-4.0.0.tar

  Read the article

• Problem with FedEx Address validation web service

  - by DJ Matthews

  Hi, I'm trying to get started with Fedex'es Address validation service and I'm running into a road block with FedEx's own demo application. This is the code in there app: Sub Main() ''# Build a AddressValidationRequest object Dim request As AddressValidationRequest = New AddressValidationRequest() Console.WriteLine("--- Setting Credentials ---") request.WebAuthenticationDetail = New WebAuthenticationDetail() request.WebAuthenticationDetail.UserCredential = New WebAuthenticationCredential() request.WebAuthenticationDetail.UserCredential.Key = "###" ''# Replace "XXX" with the Key request.WebAuthenticationDetail.UserCredential.Password = "###" ''# Replace "XXX" with the Password Console.WriteLine("--- Setting Account Information ---") request.ClientDetail = New ClientDetail() request.ClientDetail.AccountNumber = "###" ''# Replace "XXX" with clients account number request.ClientDetail.MeterNumber = "###" ''# Replace "XXX" with clients meter number request.TransactionDetail = New TransactionDetail() request.TransactionDetail.CustomerTransactionId = "Address Validation v2 Request using VB.NET Sample Code" ''# This is just an echo back request.Version = New VersionId() request.RequestTimestamp = DateTime.Now Console.WriteLine("--- Setting Validation Options ---") request.Options = New AddressValidationOptions() request.Options.CheckResidentialStatus = True request.Options.MaximumNumberOfMatches = 5 request.Options.StreetAccuracy = AddressValidationAccuracyType.LOOSE request.Options.DirectionalAccuracy = AddressValidationAccuracyType.LOOSE request.Options.CompanyNameAccuracy = AddressValidationAccuracyType.LOOSE request.Options.ConvertToUpperCase = True request.Options.RecognizeAlternateCityNames = True request.Options.ReturnParsedElements = True Console.WriteLine("--- Address 1 ---") request.AddressesToValidate = New AddressToValidate(1) {New AddressToValidate(), New AddressToValidate()} request.AddressesToValidate(0).AddressId = "WTC" request.AddressesToValidate(0).Address = New Address() request.AddressesToValidate(0).Address.StreetLines = New String(0) {"10 FedEx Parkway"} request.AddressesToValidate(0).Address.PostalCode = "38017" request.AddressesToValidate(0).CompanyName = "FedEx Services" Console.WriteLine("--- Address 2 ---") request.AddressesToValidate(1).AddressId = "Kinkos" request.AddressesToValidate(1).Address = New Address() request.AddressesToValidate(1).Address.StreetLines = New String(0) {"50 N Front St"} request.AddressesToValidate(1).Address.PostalCode = "38103" request.AddressesToValidate(1).CompanyName = "FedEx Kinkos" Dim addressValidationService As AddressValidationService.AddressValidationService = New AddressValidationService.AddressValidationService ''# Try ''# This is the call to the web service passing in a AddressValidationRequest and returning a AddressValidationReply Console.WriteLine("--- Sending Request..... ---") Dim reply As New AddressValidationReply() reply = addressValidationService.addressValidation(request) Console.WriteLine("--- Processing request.... ---") ''#This is where I get the error If (Not reply.HighestSeverity = NotificationSeverityType.ERROR) And (Not reply.HighestSeverity = NotificationSeverityType.FAILURE) Then If (Not reply.AddressResults Is Nothing) Then For Each result As AddressValidationResult In reply.AddressResults Console.WriteLine("Address Id - " + result.AddressId) Console.WriteLine("--- Proposed Details ---") If (Not result.ProposedAddressDetails Is Nothing) Then For Each detail As ProposedAddressDetail In result.ProposedAddressDetails Console.WriteLine("Score - " + detail.Score) Console.WriteLine("Address - " + detail.Address.StreetLines(0)) Console.WriteLine(" " + detail.Address.StateOrProvinceCode + " " + detail.Address.PostalCode + " " + detail.Address.CountryCode) Console.WriteLine("Changes -") For Each change As AddressValidationChangeType In detail.Changes Console.WriteLine(change.ToString()) Next Console.WriteLine("") Next End If Console.WriteLine("") Next End If Else For Each notification As Notification In reply.Notifications Console.WriteLine(notification.Message) Next End If Catch e As SoapException Console.WriteLine(e.Detail.InnerText) Catch e As Exception Console.WriteLine(e.Message) End Try Console.WriteLine("Press any key to quit !") Console.ReadKey() End Sub It seems to send the request object to the web service, but the"reply" object is returned with "Nothing". I could understand if I wrote the code, but good god... they can't even get their own code to work? Has anyone else seen/fixed this problem?

  Read the article

• How do I make an external hard drive keep the same drive letter permanently?

  - by andygrunt

  I have a desktop PC (2002 vintage) running Windows XP that I turn on about 2 or 3 times per week. I have a mains powered 250Gb Western Digital hard disk connected to it via USB. I always turn the hard disk on before the PC so it's up and running as the PC boots. When I first connected the external hard disk, the PC assigned it a letter ('i' if it matters) and I've installed software to it, created shortcuts to various files and folders on the disk using that letter. For years everything was fine then I would boot the PC and the hard disk was assigned a different letter. I'd then have to go into 'my computer/manage/disk management' and manually change the letter back to 'i'. If I then rebooted the PC, the hard disk would usually still be 'i' but after the next reboot would be some other random letter and I have to manually change it back to 'i'. This would go on for some time then there'd be periods when the it would always be 'i' then, for no apparent reason (no new devices added, for example), the drive letter would start changing again. At the moment it's in random drive letter mood so I thought I'd ask the following question... How do I assign the external hard disk to be 'i' permanently? Answer: Thanks Molly that seems to have done the trick (after a little fiddling) - slightly disappointed there wasn't a way to do it within Windows without installing something else though. For anyone else trying this, it wasn't completely straightforward so here's what happened with me. I installed USBDLM as per the instructions on its website. I guessed that I had to assign the first USB letter to i so replaced the 'Letter1=' lines to 'Letter=I' in the ini file. To test it, I rebooted the PC only to find it came back up with the display set to 640x480 in 16 colours. After some investigation, I re-installed the display drivers and rebooted and set the display back to its usual setting. The external hard disk now gets set to 'i' but I found I had to re-apply sharing status to it so it was seen from my laptop which is on the same network. The end result of all this is that it now does what I wanted although it does act as though the hard drive has just been plugged in a few seconds after the Windows desktop appears i.e. the little box appears with a progress bar as it searches through the contents of the 'new' hard drive and I eventually get a dialogue box saying 'This disk or device contains more than one type of content. What do you want Windows to do?' and lists options such as play media files, print the pictures or open folder to view the files. This is a tiny pain I wish didn't happen but not exactly a huge price to pay. Other than that - it seems to work fine :) Looks like a spoke too soon... Every time I reboot, I have to re-share the 'i' drive (which I didn't have to do before) so it can be seen by my laptop on the same network. Any ideas how to make that permanent?

  Read the article

• How to go to a website on a shared server by its ip address?

  - by user1502776

  I have a few questions, please help: Fist, I can access google search just by typing http://74.125.224.211 because this is the ip address returned by nslookup. However, I could not do so with ip addresses returned from www.yahoo.com. How do I go to yahoo search page by its ip ? Another example, http://www.allaboutcircuits.com will resolve to 68.233.243.63 by DNS server, but if I go to http://68.233.243.63 I got "Hello world!" , lol ! Second, for some reason, there is something wrong with DNS resolvers with my web hosting service (it will not be fixed !!). So command like, get_file_contents("http://www.allaboutcircuits.com"); will return php_network_getaddresses: getaddrinfo failed: Name or service not known How do I get around this with IP address , 68.233.243.63 I mean somehow attach the HTTP hostname parameter to get_file_contents() ? I would like to solve this on my own side (in my code), no troubleshooting/adjustment will be done by server admin.

  Read the article

• How to lookup an IP address in an Excel spreadsheet?

  - by Kevin Williams

  I am working with a decent sized spreadsheet of domains and server names. Another user of the spreadsheet needs the IP address for each of the DNS entries on the worksheet. Instead of manually adding and then having to maintain this list I was hoping there was an easy way to do an IPAddress lookup to display the IP address in a cell. I've seen some VBScripts that call gethostbyname, e.g.: Declare Function GetHostByName Lib "wsock32.dll" Alias "gethostbyname" (ByVal Host As String) As Long But I'm not a VB expert so I'm not sure if this is the right way to go. Any advice/links would be appreciated! also if this is a question better suited for Stack Overflow - let me know, I'm new here.

  Read the article

• Proper way for changing MAC address in a linux VM?

  - by HappyDeveloper

  I tried to change the MAC address in a ubuntu VM (virtualbox), but after that it threw lots of errors during boot, and then I had no internet connection. Then I saw that the interface was renamed to eth1, so I edited /etc/network/interfaces to change eth0 to eth1, rebooted (didn't know how to restart the network), and boot was now faster and internet worked fine. But now after every time I log in, I get 1 or 2 error messages that say nothing, they only ask me if I want to report them. So I was wondering, is there was a proper way to change MAC address, to avoid these issues?

  Read the article

• How to find ip address of my Asus RT-AC86U in Access Point mode?

  - by WilliamKF

  I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

  Read the article

• How do I configure Shrewsoft's VPN client to only route traffic to a certain IP address through the VPN?

  - by dommer

  We're using Shrewsoft's VPN client to connect to a third party development server. However, it seems to be configured to send all or nothing through the VPN. The devs have to disconnect from the VPN to get email/internet access back. The server that needs to be accessed via the VPN is on a specific (local - 10.x.x.x) IP address and a specific ports. Can we configure the Shrewsoft client application to only route traffic to that one address and/or port through the VPN and to route anything else though the usual channels? If so, how is it done? I'm not a VPN specialist and the options are confusing. In the absence of any Shewsoft VPN client specific advice, what should I be search for? Split tunnels?

  Read the article

• How can I know IP address of the sender in Gmail/Yahoo/Hotmail?

  - by luvboy

  Is there a way to know sender's IP address sent in Gmail/Yahoo Mail/Hotmail any mail?

  Read the article

• Can you convert an address to a zip code in a spreadsheet?

  - by moe37x3

  Given a column of street addresses with city and state but no zip in a spreadsheet, I'd like to put a formula in a second column that yields the ZIP code. Do you know a way to do this? I'm dealing with US addresses, but answers pertaining to other countries are interesting, too. UPDATE: I guess I'm mostly hoping that there's a way to do this in Google Spreadsheets. I realize that you need to access a vast ZIP code database to do this, but it seems to me that such a database is already inside Google Maps. If I put an address in there without ZIP code, I get back an address with ZIP code. If Maps can do that lookup, maybe there's a way to make it happen in Spreadsheets, too.

  Read the article

• How is the MAC address on a computer determined?

  - by Zero Stack

  While imaging some computers today, I started to wonder... what if two LAN MAC addresses on two different computers matched?... That would cause some problems. I later came to understand that the MAC address' 48-bit address space contains potentially 248 or 281,474,976,710,656 possible MAC addresses. [ in other-words, a lot of networking devices ] How are these MAC addresses determined? Will we ever run out of them? ( I know the second question is speculation, but there are a lot of devices that require a mac addresses...) Do MAC addresses get recycled?

  Read the article

• For buffer overflows, what is the stack address when using pthreads?

  - by t2k32316

  I'm taking a class in computer security and there is an extra credit assignment to insert executable code into a buffer overflow. I have the c source code for the target program I'm trying to manipulate, and I've gotten to the point where I can successfully overwrite the eip for the current function stack frame. However, I always get a Segmentation fault, because the address I supply is always wrong. The problem is that the current function is inside a pthread, and therefore, the address of the stack seems to always change between different runs of the program. Is there any method for finding the stack address within a pthread (or for estimating the stack address within a pthread)? (note: pthread_create's 2nd argument is null, so we're not manually assigning a stack address)

  Read the article

• win8: access denied to external USB disk; update access rights fails

  - by Gerard

  I use to work with 2 laptops (vista and win7), my work being files on an external usb disk. My oldest laptop broke down, so I bought a new one. I had no option other than take win8. 1/ I suspect something changed with access rights, as my external disk suffered some "access denied" problem on win8. I was prompted (by win8) somehow to fix the access rights, which I tried to do, getting to the properties - security. This process was very slow and ended up saying "disk is not ready". Additonnally, the usb somehow was not recognized anymore. 2/ Back to win7, I was warned that my disk needed to be verified, which I did. In this process, some files were lost (most of them i could recover from the folder found00x, but I have some backup anyway). Also, I don't know why, but under win7, all the folder showed with a lock. 3/ Then back again to win8. Same problem : access denied to my disk + no way to change access rights as it gets stuck "disk is not ready". Now I am pretty sure there is some kind of bug or inconsistence in win8 / win7. I did 2/ and 3/ a few times. At some point, I also got an access denied in win7. I could restore access rigths to the disk to "system" (properties - security - EDIT for full control to group "system" ...). But then I still get the same access right pb on win8, and getting stuck in the process to restore full control to "system" -- and "admin" groups. Now, after I tried for more than 3 days, I am losing my patience with that bloody win8 which I did not want to buy but had no choice. I upgraded win8 with the windows updates available. Does not help. Anybody can help me ?

  Read the article

• How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

  - by joe larson

  Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

  Read the article

• How do I install Windows XP from an external hard drive?

  - by Plasmer

  I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

  Read the article

• Can I clone my hard drive to an external and boot from the clone?

  - by willbuntu

  First thing: I am not asking what software I'm supposed to use. I already know the answer: Ghost (proprietary), Clonezilla, and dd (if I'm careful). What I really want to know is if it is possible to (essentially) bit-for-bit clone my entire installation (OS, installed software, activation(s), etc.) to an external USB hard-drive, and then boot off of that (if I need to, I know how to edit BIOS settings and use Plop boot manager), and work with it day-to-day as if there was virtually no difference from using my internal HDD now. Again, I'm not asking how to install Windows to an external (because I know I'd need to do some special workaround), I'm asking if I can clone everything and boot off of it. In case you're wondering why I'm going to this trouble: I'm using a Lenovo Essentials laptop that has an unmodifiable partition table (due to recovery crap), and has all 4 of its partitions spoken for (3 primary, one extended, cannot change the extended). Anyway, my thought is that if I can clone everything and boot off of it when I need to, and just have a Linux distro on the internal HDD, then that could work.

  Read the article

• Which Cardbus/PCMCIA -> USB card works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Need recommendation: which USB card (PCMCIA) works with external hard drive?

  - by Carl

  I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

  Read the article

• Eclipse: How to build an executable jar with external jar?

  - by Ben

  Hi all, I am trying to build an executable jar program which depends on external jar downloaded. In my project, I included them in the build path and can be run and debug within eclipse. When I tried to export it to a jar, I can run the program but I can't when I try to press a button which includes function calls and classes from the external jar. I have edited the environment variables (Windows XP) CLASSPATH to include paths of all the external jar, but it doesn't work. A point to note is that I got compile warnings while exporting my executable jar, but it doesn't show up any description about the warnings. Would someone kindly provide a thorough guide on how to include an external jar program using eclipse? Best regards, KWAN Chiu Yin, Ben

  Read the article

• How do I solve an unresolved external when using C++ Builder packages (with TForm based classes)?

  - by José Renato

  Hi, i'm working with Bulder C++ 6 and 2010, and i'm having this problem: http://stackoverflow.com/questions/2727001/how-do-i-solve-an-unresolved-external-when-using-c-builder-packages But, the difference here is that i'm using a FORM compiled inside the package, so, take the example above, but in addition i'm including a form classe, like TForm2: class TForm2 : public TForm { __published: // IDE-managed Components TButton *Button1; void __fastcall Button1Click(TObject *Sender); private: // User declarations public: // User declarations __fastcall TForm2(TComponent* Owner); }; //--------------------------------------------------------------------------- extern PACKAGE TForm2 *Form2; //--------------------------------------------------------------------------- So, when i'm trying to use this class in any project the linker stops and give me the unresolved external error. When i got that error i tried to include the word PACKAGE, like this: class PACKAGE TForm2 But, when i tried to compile the PACKAGE, the compiler stops with the unresolved external error: [ILINK32 Error] Error: Unresolved external '__fastcall Forms::TCustomForm::~TCustomForm()' referenced from c:\projects\UNIT2.OBJ How can i solve this problem? PS.: Sorry about the bad English.

  Read the article

• How do I check for the existence of an external file with XSL?

  - by LOlliffe

  I've found a lot of examples that reference Java and C for this, but how do I, or can I, check for the existence of an external file with XSL. First, I realize that this is only a snippet, but it's part of a huge stylesheet, so I'm hoping it's enough to show my issue. <!-- Use this template for Received SMSs --> <xsl:template name="ReceivedSMS"> <!-- Set/Declare "SMSname" variable (local, evaluates per instance) --> <xsl:variable name="SMSname"> <xsl:value-of select=" following-sibling::Name"/> </xsl:variable> <fo:table font-family="Arial Unicode MS" font-size="8pt" text-align="start"> <fo:table-column column-width=".75in"/> <fo:table-column column-width="6.75in"/> <fo:table-body> <fo:table-row> <!-- Cell contains "speakers" icon --> <fo:table-cell display-align="after"> <fo:block text-align="start"> <fo:external-graphic src="../images/{$SMSname}.jpg" content-height="0.6in"/> What I'd like to do, is put in an "if" statement, surronding the {$SMSname}.jpg line. That is: <fo:block text-align="start"> <xsl:if test="exists( the external file {$SMSname}.jpg)"> <fo:external-graphic src="../images/{$SMSname}.jpg" content-height="0.6in"/> </xsl:if> <xsl:if test="not(exists( the external file {$SMSname}.jpg))"> <fo:external-graphic src="../images/unknown.jpg" content-height="0.6in"/> </xsl:if> </fo:block> Because of "grouping", etc., I'm using XSLT 2.0. I hope that this is something that can be done. I hope even more that it's something simple. As always, thanks in advance for any help. LO

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >