Search Results

Search found 2008 results on 81 pages for 'greg smith'.

Page 25/81 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Losing partitions after every reboot

  - by Winston Smith

  I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

  Read the article

• Jail Linux user to directory for FTP login

  - by Greg

  I'm planning on using vsftpd to act as a secure ftp server, but I am having difficulty controlling the linux users that will be used as ftp logins. The users are required to be "jailed" into a specific directory (and subdirectories) and have full read/write access. Requirements: - User account "admin_ftp" should be jailed to /var/www directory. - Other accounts will be added as needed, for each site... e.g: - User account "picturegallery_ftp" should be jailed to /var/www/picturegallery.com directory. I have tried the following, but to no avail: # Group to store all ftp accounts in. groupadd ftp_accounts # Group for single user, with the same name as the username. groupadd admin_ftp useradd -g admin_ftp -G ftp_accounts admin_ftp chgrp -R ftp_accounts /var/www chmod -R g+w /var/www When I log into FTP using account admin_ftp, I am given the error message: 500 OOPS: cannot change directory:/home/admin_ftp But didn't I specify the home directory? Extra internets for a guide how to do this specifically for vsftpd :)

  Read the article

• How do I create an ISO image from a directory structure on CentOS?

  - by tom smith

  I'm trying to figure out the exact mkisofs cmd to create the ISO with the following directory and file structure. I've tried different commands, but when I mount the ISO that is created the directory tree has not been reproduced. The initial directory tree is: master.iso:: mount -o loop /apps/vmware/master.iso /mnt/vmtest ls /mnt/vmtest isolinux ks.cfg upgra32 upgra64 upgrade.sh ls /mnt/vmtest/isolinux boot.cat initrd.img isolinux.bin isolinux.cfg vmlinuz I've used different variations of the following mkisofs command without success: mkisofs -o '/foo/test.iso' -b 'isolinux.bin' -c 'boot.cat' -no-emul-boot -boot-load-size 4 -boot-info-table 'isolinux' How do I make an ISO that captures a directory's exact structure?

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

• Create Virtual Image of Laptop before Formatting

  - by Simon Mark Smith

  I have a 3 year old laptop running Windows XP that I used for business. Although I have not used the laptop in over a year, I now want to re-commission it with Windows 7 and a fresh install. Before I do the fresh install I want to create a Virtual Image of the laptop that I can keep and potentially run on my desktop machine should I ever need to access any of the old files/projects that it contains currently. I know that most people will say just copy the files over to your desktop, but my concern is the configuration of the laptop. I used to use it for development and it has older versions of Visual Studio, SQL Server, Active X controls etc, etc than I currently use so I really want to preserve the environment not just the files. So really I am asking what is the best tool-set/method to achieve this? I understand there are free VM tools available but I have never done this before and would appreciate any help.

  Read the article

• phpredis + pconnect

  - by john smith

  I am using phpredis on my php based website. The webserver I am using is a the simplest apache apt-get installation, no configuration involved, as this is only a development environment. The issue I am facing is that basically, while using phpredis, there is no difference between "connect" and "pconnect" commands: they both create a new connection everytime, as I can see from the "info" command on redis-cli. Now, I am pretty sure it is because of the apache configuration and the fact that it probably (most likely) is a multi-threaded env, therefore can't enstablish a single connection. My question is basically for when I will turn into production: what would the best choice of a webserver be to avoid this problem? I remember using lighttpd with thousands of users and still get only a very few (like 2 or 3) connections on mongoDB. Any ideas? Thanks in advance.

  Read the article

• Can't create a new HomeGroup in Windows 8

  - by Ian Smith

  I'm trying to create a new HomeGroup in Windows 8 for 2 new PCs with Windows 8 installed so that I can share printers etc. Both PCs use Microsoft Account to log in - a Microsoft Account I set up about a year ago with one of the early beta's with a PC that's since been repaved with the RTM of Windows 8 When I click on "HomeGroup" in the "Metro" control panel the "Create" option is not there. Instead I'm told that "HomeGroup" already exists on the PC I've since repaved and renamed and I can join it by entering the password. I have no recollection of what the password might have been and in any event that PC doesn't exist, but there is no way to say "That group doesn't exist anymore just create me a new one dammit". Even using the old Control Panel the "HomeGroup" nonsense persists with the only option being "Join" that needs a password. How do I "start afresh" and create a new HomeGroup that I can use to connect my Windows 8 and Windows 7 PCs and use common printers, network drives etc.

  Read the article

• Why does localhost and 127.0.0.1 resolve to different locations on Mac OSC 10.8?

  - by Greg Wiley

  I set up a local server without MAMP, for various reasons. I used this tutorial: http://coolestguyplanettech.com/downtown/install-and-configure-apache-mysql-php-and-phpmyadmin-osx-108-mountain-lion I'm just wondering why the local IP and localhost resolve to two different locations. Right now the IP resolves to a Virtual Host I set up and the localhost resolves to the DocumentRoot established by httpd.conf

  Read the article

• Output to TV only works if monitor is plugged in

  - by Greg Sansom

  I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

  Read the article

• Can't install apache server, refuses to find

  - by Greg Dougherty

  I'm attempting to install Apache httpd-2.4.3. running $ ./configure --with-included-apr --with-pcre=/home/gregd/httpd-2.4.3/pcre --with-mod_alias --with-mod_include --with-mod_mime --with-mod_rewrite --with-mod_speling --with-mod_ss I get the following error: configure: error: Did not find pcre-config script at /home/gregd/httpd-2.4.3/pcre But the file pcre-config most certainly DOES exist in /home/gregd/httpd-2.4.3/pcre. So does configure. Installing on ubuntu. Any help would be greatly appreciated.

  Read the article

• Server 2008 Task Scheduler and a CMD file

  - by Mark Smith

  Task Scheduler - I have a .cmd file I'm trying to execute on a regular basis through Task Scheduler. I've set the task so that it points to the cmd file. I want the task to execute even when no one is logged in. I've set the credentials associated with the task to the local service account. When I execute the task, nothing happens. The Last Run Result shows 0x1, this means it didn't execute properly. When I run the file from a command prompt it executes just fine. Any help out there would be appreciated. I would post the code but it has sensitive information in it and I'm not allowed to let the code outside. Thanks

  Read the article

• Tools to monitor guest OS performance in vSphere

  - by Quick Joe Smith

  I am looking for some tool or way to retrieve performance data from guest VMs running under vSphere 4.1. I am currently interested in the 4 basic metrics: CPU(%), Memory(%), Disk availability(%) & Network utilisation(Kb/s). The issue I have is that all of vSphere's performance data is from a ESXi host perspective (active, shared, consumed, overhead, swapped etc.) which is far removed from the data from the VM's own perspective. For instance, I have a Windows server VM idling, using around 410MB (~25% of its allocated 2GB) as reported by Task Manager, and this is the value I'm after. vSphere's metrics seem unable to arrive at this figure by any reliable and repeatable means. Is anyone aware of tools that can obtain this kind of data? The simpler, the better.

  Read the article

• What is a good encryptable disk image format suitable for rsync on a PC?

  - by Greg Joshner

  I’m looking for a solution to encrypt my XP home directory and then rsync the encrypted image file to a remote server. Since I don’t want to transfer several Gigs for even the smallest change in the image I’m looking for a solution which saves the image “chunked” into smaller files. That way Rsync can transfer only the changed elements. Do you have any ideas? Thanks a lot for your help!

  Read the article

• How to change theme in Windows 7 with Powershell script?

  - by Greg McGuffey

  I would like to have a script that would change the current theme of Windows 7. I found the registry entry where this stored, but I apparently need to take some further action to get windows to load the theme. Any ideas? Here is the script that I'm trying to use, but isn't working (registry updated, but theme not changed): ###################################### # Change theme by updating registry. # ###################################### # Define argument which defines which theme to apply. param ( [string] $theme = $(Read-Host -prompt "Theme") ) # Define the themes we know about. $knownThemes = @{ "myTheme" = "mytheme.theme"; "alien" = "oem.theme" } # Identify paths to user themes. $userThemes = " C:\Users\yoda\AppData\Local\Microsoft\Windows\" # Get name of theme file, based on theme provided $themeFile = $knownThemes["$theme"] # Build path to theme and set registry. $newThemePath = "$userThemes$themeFile" $regPath = "HKCU:\Software\Microsoft\Windows\CurrentVersion\Themes\" Set-ItemProperty -path $regPath -name CurrentTheme -value $newThemePath # Update system with this info...this isn't working! rundll32.exe user32.dll, UpdatePerUserSystemParameters Thanks!

  Read the article

• Organization: Ways to link/group documents with emails?

  - by Scott Smith

  I like keeping my stuff organized, but short of printing everything out and keeping it in an actual file cabinet, I've never figured out a good way to link/group document files with related emails. This means that when I'm looking for something, I often have to search in my email program, and then through the documents stored in some filesystem folder. Has anyone out there come up with a neat way to group related stuff like this for searching, archiving, etc?

  Read the article

• Fill a table from a RAND based formula in Excel 2010

  - by Greg Reynolds

  I am trying to do a Monte Carlo simulation using Excel, but a lot of the tutorials I have found are either for older versions of the product, or are not quite what I am after. A simple example of the kind of think I am after is: Cell A1 contains the formula to simulate (for example int(6*rand())+1 to simulate rolling a dice). I have 10 rows of "Trials". What I want is to somehow point each row at a different calculation of the formula in A1. So I would end up with something like Trial Value 1 2 2 5 3 6 4 2 5 1 6 3 7 2 8 4 9 2 10 1 I have tried playing with some of the "What-if Analysis" tools, but I am a bit lost.

  Read the article

• Prevent Windows from resizing all the apps on the desktop when switching monitors

  - by Greg Hewgill

  Short version: When moving my laptop and sleeping between using different monitors, all my open windows are crammed into the upper left corner as if they tried to fit on the laptop internal screen resolution. I plug in and switch to the external monitor before unlocking my session. Is there a way to prevent this automatic resizing? Longer version: I have a laptop that I move between two locations. I have one docking station, and the same kind of monitor configured for 1600x1200, in both locations. The internal laptop screen is awful so I don't use it. Location A: Docking station, monitor connected via DVI. Location B: No docking station, external monitor connected via VGA cable. In this location I have the laptop lid open for keyboard access but I don't use the laptop screen. When moving from Location A to Location B, the laptop wakes up from sleep, displaying the screen on the internal monitor. I switch to the external monitor display (using Fn+F8 on this laptop), and only after that do I unlock my session with my password. However, Windows has crammed all my nicely arranged windows into the upper left corner as if it were trying to fit them all on the laptop internal screen resolution. When moving from Location B to Location A, I have the laptop lid closed when using the docking station so Windows apparently concludes the screen resolution is 1600x1200 and doesn't resize any windows. The laptop is a Dell Latitude running Windows 7 Professional.

  Read the article

• Windows 7 - Opening files from Windows Explorer with Elevated Permissions?

  - by Martin Smith

  I've just started using Windows 7 and am instantly finding one aspect pretty annoying. When I open certain files from Windows Explorer / Windows Search results etc then I then cannot save them as it throws up the following message box. C:\Windows\System32\drivers\etc\hosts You don’t have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the My Documents folder instead? [Yes] [No] However I can't see any way of opening the file with elevated permissions. Is the only workflow to first open the application with elevated permissions then open the file?

  Read the article

• windows dvd maker encoding

  - by Greg Rains

  My Windows DVD Maker stops/freezes the encoding process on some movies that I have converted to AVI files. Is there an answer to this using Windows DVD Maker? Or is there another software product that is better? (using Windows 7 Professional)

  Read the article

• Configure ubuntu 12.10 to share internet through second NIC with subnetwork

  - by Dan Smith

  I have an Ubuntu 12.10 box with 2 NICs. eth0 is connected to my 192.168.1.X network, which is connected to my home router and out to the internet. I want the other interface, eth1,to support 10.0.0.x and allow devices on that network to access the internet through my ubuntu box. I do not need dhcp on the 10.0.0.x network. Here's a schematic: Internet --- home router ---- ubuntu[eth0:192.168.1.x, eth1:10.0.0.x] --- [10.0.0.x device] How do I configure the ubuntu box to share the internet with devices on that subnetwork? Thanks!

  Read the article

• Server memory issues, and expected level of service from hosting company

  - by Greg

  I'm involved in maintaining an Ubuntu VPS which runs our django websites (nginx/apache/mod_wsgi) and we've been having some memory spikes which have either caused the database to die, or induced kernel panic when the memory management system can't find any killable processes. I'm working on fixing the memory spikes, but I'm wondering whether there's anything I can do to better deal with the problem if it occurs again. Are there any tools I could use to detect the memory spikes and then, say, kill the offending process and email the server admin to fix it up? Killing off one website so that the server can remain operational is certainly preferable to the whole thing falling over. Also, we were charged $600 for after-hours service because we had to get the hosting company to restart the server - is this standard practice among hosting companies? Another provider I work with provides a panel with which I can stop and start the server myself, and given that a restart was all that was needed, $600 seems mightily excessive. (That's NZD, it's around $445 USD)

  Read the article

• Kill xserver from command line (init 3/5 does not work)

  - by John Smith

  Hi, I'm running Linux Mint 10, although I've had this same issue with other variants of Linux. I've been told/found while researching that if the X server hangs or otherwise errors, one can drop to a root prompt, usually at another tty, and execute init 3 (to drop to single user mode) and then init 5 to return to the default, graphical session. Needless to say, I've tried this before in multiple configurations on multiple machines to no avail. The only feedback I receive form executing those two commands is a listing of VMWare services (from a kernel module) that are stopped and then restarted. Note: If I run startx (either before or after init 3), then I am told that the xserver is still running and that I should remove /tmp/.X0-lock. Having tried that, it removes that error message, but claims that the xserver cannot be attached as another instance is running. How do I kill the xserver completely? Can I killall some process name?

  Read the article

• Stress test a server for simultaneous connection

  - by weston smith

  I am trying to figure out a practical way to stress test a server for 300 to 600 simultaneous connections. Any advice? Thank you everyone for the help. To be more specific (sorry I wasn't before) this is a Flash Media Server on AWS that will be streaming live video. I've been having problems with the video freezing/buffering for everyone and I need to verify if its on the user end, upload end, or server end. I mainly need help with stress testing the server with 300-600 multiple request before going live.

  Read the article

• What are these isolated resource requests in Apache's access_log?

  - by Greg

  I was looking at my Apache access log and came across some strange requests. A single IP address will access several resources (mostly css style sheets and images), but no actual pages. Sometimes they are requesting a resource that no longer exists on the server, or one that is still under the web root but no longer used (e.g. a resource in an old WordPress theme). Also: The requests list no referrer I get no useful information on the IP address by looking it up There doesn't seem to be any pattern among the IP addresses that are making these requests (e.g. different countries) Are these just links from a stale cache somewhere? Could it be a sign of an attack of some sort? Here is a typical example: GET /wp-content/themes/my-theme/images/old-image.gif HTTP/1.1" 500 809 "-" "Mozilla/4.0 (compatible;)" This was one of about 10 similar requests, some for existing resources, some for older resources. There is no other sign of this IP address in access_log. Note the internal server error, which is a topic for a different thread. What I'm asking here is where would isolated requests like this come from?

  Read the article

• Squid - Selective reverse proxy and forward proxy

  - by Dean Smith

  I'd like to setup a squid instance to do selective reverse proxy for a configured list of URLs whilst acting as a normal forward proxy for everything else. We are building new infrastructure, parallel live as it where, and I want to have a proxy that people can use that will force selective traffic into the new platform whilst just acting as a forward proxy for anything else. This makes it very easy for people/systems to test the portions of the new platform we want without having to change too much, just use a proxy address. Is such a setup possible ?

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >