Search Results

Search found 10181 results on 408 pages for 'installation'.

Page 25/408 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • Can't install Ubuntu, black screen after install

    - by Tyrone
    I tried several times, but wasn't able to make it work. I tried all recent types of Ubuntu but it didn't work. Then I tried acpi=off at the beginning of the installation. In this way I could finish the installation. But after the restart Ubuntu didn't work. Only a black screen appeared. Before that I tried it on the VirtualBox and it work. By the way my system is the following: (I use windows 7 currently) Processor AMD Athlon II P320 (2,1 GHz, second-level cache 2 ? 512 KB, HT 1600 MHz bus) Chipset AMD M880G + SB850 Memory Dual Channel, 3 GB DDR3-1066 Wide Screen 15.6 “high-definition (1366 ? 768) c LED-backlit, AU Optronics B156XW02 Video Card AMD Radeon HD 4250, from 336 MB video buffer in memory, support for DirectX 10.1 and UVD Sound system: HDA-codec IDT 92HD81B1X AMD HDMI Audio Hard drive WDC WD3200BEVT-75A23T0 (298 GB, 5400 RPM, SATA 2.0) Optical Drive: DVD ± RW Optiarc AD-7585H Communication tools Fast Ethernet (10/100 Mbit / c) Realtek RTL8102E/RTL8103E WiFi 802.11a/b/g Broadcom BCM4310 Bluetooth 2.1 + EDR Card reader Memory Card Reader 7-in-1 with support for SD / SDHC / MMC / MS / xD, and derivatives Interfaces / ports 3 USB 2.0 1 eSATA + USB 2.0 15-pin video connector VGA HDMI RJ-45 Ethernet 10/100 Mbit / c 2 analog mini-jack: a microphone / headphone jack for a Kensington lock slot AC adapter Battery Li-Ion 6-cell capacity of 4400 mA ? h (10,8, 48 W ? hr) AC power adapter 65 Watt Additional equipment integrated web-camera (1.3 mega pixels)

    Read the article

  • How do I install 10.04 on a Vortex86DX embdedded system?

    - by mathematician1975
    I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

    Read the article

  • Installing Ubuntu along with windows 7 on shrunk partition

    - by Thabo
    I am new to Ubuntu OS and ask Ubuntu community. First this is not a duplicate question. Actually this a question which is a summery of all solutions and questions were posted in this community, related to Install Ubuntu along with Windows 7. I have bought a new Hp laptop with its original windows 7.I want to install Ubuntu along with windows 7 64 bit. I ran the Ubuntu 12.4 Desktop installation CD. But Ubuntu installer doesn't show the "along with windows 7 option"only it is showing two options. I read some questions and answers posted on this community. Specially following link Ubuntu 12.04 does not see windows already install on my computer (dual installation) I tried following thinks, I ran the terminal in live CD and tried sudo dmraid -rE command and dmraid remove command .But terminals says there is no dmraid partitions. So I tried another scenario checked my partitions with g parted.There are some partitions labeled C,HP tools,Recovery and System. C is containing windows 7 Files. So I shrank the volume of C Drive. Now I have 50000Mb of unallocated disk. I tried with Gparted to create a partition on that allocated space.It says some thing that you can't create more than four primary partition.Of course all other four partitions were created on widows are actually type of primary partition. So I went back to Windows 7 and tried to create a new volume on unallocated space.But unfortunately it says,If i create a new volume it will be the type of Dynamic partition.It says we cant boot another OS from that partition. So i cancelled that step. Now i have 50000Mb unallocated space but how can i install Ubuntu on that partition without harming the existing Windows 7? Because still I have only two options: Erase and install Ubuntu. Try something else. (I can see my unallocated space by going to "something else" option.)

    Read the article

  • How do I force Wubi to install a 32-bit version?

    - by marx
    I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

    Read the article

  • Windows 7 and Ubuntu Boot/Corruption Problems

    - by Kiraisuki
    I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

    Read the article

  • Failure to Boot Windows 7 after Ubuntu install

    - by Mike
    My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

    Read the article

  • "Unable to install GRUB in /dev/sda" when installing GRUB

    - by vicban3d
    I recently bought a shiny new Lenovo Yoga 2 Pro and I want to dual boot it with Ubuntu for studying purposes. Its built-in OS is Windows 8.1 and it has a 256GB SSD. I've made a separate 90GB partition just for Ubuntu and a live USB to install it. The first time everything seemed to work great, I solved the wifi issued by blacklisting ideapad_laptop, the installation went flawlessly and Ubuntu worked fine. When I got up the next morning and turned on my laptop it booted into Windows right away without ever showing the GRUB menu. So I tried to reset, and checked my partitions with the Disk Manager and everything looked fine. Since I couldn't find a solution online I went ahead and formatted the partition to try and install again. This time and every time since, the installation was aborted and I got a fatal error saying: Unable to install GRUB in /dev/sda Executing `grub-install /dev/sda` failed. This is a fatal error. Can anyone please suggest a solution to this problem? If any further information is needed I would be happy to provide it. Thanks. When installing I get the following in details: ubuntu kernel: [ 1946.372741] FAT-fs (sda2): error, fat_get_cluster: invalid cluster chain (i_pos 0). ubuntu grub-installer: error: Running 'grub-install --force failed.

    Read the article

  • Ubuntu installed along side Win 8 but not shown in boot

    - by Mahesha999
    Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

    Read the article

  • Hard time installing Ubuntu

    - by Nick
    I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

    Read the article

  • ProStar gaming laptop, which had Ubuntu 10.10, won't boot past Grub. Thoughts?

    - by Richard Zak
    At work we have some high-end gaming laptops we use for their dual GPUs. The machines have second generation i7 CPUs, and came with Windows 7. On most of them I installed Ubuntu 10.10, and all was fine. There were two laptops that I wanted to repurpose and wanted to reinstall the OS. It boots the CD (burned Ubuntu installation CD, I've tried 10.10, 11.10, and 12.04, as well as CentOS 6), and when Grub tried to boot the kernel, I just get a cursor blinking in the upper left corner of the screen. I tried the disabling of ACPI and the other items in the advanced menu, but nothing works. I could still boot to the current Linux installation though. I was able to install Windows 7 again, and use WUBI, but I think that works because it uses the Windows bootloader and not Grub. How could it have worked before and not now? I have confirmed that the CD is fine, as are the hard drive and CD drive. I also had the same problem with Debian, and had to boot through Windows 7 to install it.

    Read the article

  • Install Ubuntu side by side with Windows

    - by Igal
    I'm trying to setup both Windows 7 and Ubuntu 14.04 Desktop on the same machine. I've partitioned the disk into 3 parts, so that I can have Windows Ubuntu Shared Partition for Files I've installed Windows 7 on the first partition (which created a small partition of 100MB for boot), so now I have 4 partitions on the disk which is all it can take. Now I am installing Ubuntu, and it's asking me whether I want to: Install Ubuntu inside Windows 7 Replace Windows 7 with Ubuntu (No!) Something else I want the Ubuntu installation to go into the partition that I prepared for it. Should I choose "Something else"? If I do so -- will I be able to choose which OS to load at boot? Can anyone explain how "Ubuntu inside Windows" work? it says that it will allow me to choose which OS to load at boot, which is desired. UPDATE: When choosing "Something else" I see also an option for Device for Boot Loader Installation: /dev/sda -- the ssd disk itself /dev/sda1 -- the Windows 7 loader (100MB partition) /dev/sda4 -- which is one of the other partitions Which one should I choose there? TIA!

    Read the article

  • PC shuts down when installing ubuntu?

    - by Robin002
    I'm now using ubuntu from USB, and I'd like to install ubuntu on my hard disk. I tried the option of removing Vista while installing ubuntu. However, near the end of the installation process (presumably the end because I can see some slideshows on how to start using ubuntu), the screen suddenly goes to black with white words running around on it. Soon the computer shuts down. After that, restarting leads to a black screen with only a small white cursor on the top left corner. The cursor keeps blinking and nothing happens. I found that I can alternatively choose to boot with USB by hitting F12 just when the computer starts. So I tried to reinstall ubuntu by running ubuntu on USB. One of the options of installation is to update ubuntu 11.04 to ubuntu 11.04, so it seems the ubuntu is already installed somehow. Anyways, I tried both update and delete and install option but the same thing happens as the 1st time (sometimes before reaching the end), while I still cannot start my PC as ubuntu (without USB). How may I install ubuntu properly?

    Read the article

  • Can't install Ubuntu in Windows 8

    - by user171635
    I’ve been trying to install Ubuntu 13.04 64-bit edition on an ASUS (K53Z) laptop. I have Windows 8 64-bit installed in a non UEFI mode (I think since it starts-up with the Windows logo and I don’t have the UEFI settings). This laptop had installed Windows 7 and when I upgraded it I didn’t knew about the UEFI advantages. I tried several times to install Ubuntu from a USB device and it loads the logo and then I can’t go further in the installation. I thought it was the version of Ubuntu and tried to install Fedora (even if I personally prefer Ubuntu). I had the same problem: Fedora’s logo appears and it gets stuck. I tried also to boot from different USB devices and didn’t work either. My Bios has EFI options to boot but they were not enabled. So I tried to enable them to boot the USB in UEFI mode. A menu shows up with the options of install Ubuntu and try Ubuntu. If I click the Install or try option, I get a black screen and I can’t go further with the install (which I think is normal since I don’t have Windows 8 in EFI mode). My hypothesis is that the Bios isn’t letting Ubuntu write or read from my SSD, because the activity LED in the USB memory is on when it’s loading the installation files. Once the files are ready and the Ubuntu logo is loaded I don’t see a LED activity on neither the SSD or the USB. Thanks If I missed data you can ask me.

    Read the article

  • Ubuntu works in try out but not when installed, how to fix?

    - by QVaren
    I've got quite a problem with it, perhaps the problem lies with me but I thought I fixed it, I believe the opposite now... Anyhow, I started off with a 64-Bit Windows 7 platform and I wanted something new then the same boring windows, I heard about Ubuntu before but I didn't see a reason to change it. Now I had found my reason, so what did I do was do the installation via an USB, I went "try out before installation" first and it worked perfectly, however... When I installed it, deleted my Window 7 and tried to reboot with my fresh oh-so-clean new OS, it didn't want to load. At a certain point it said to boot up from a bootable option or something like that. Where it came to was that I couldn't load it up. Now, I wanted to switch back to Windows 7 because it didn't work and now I can't switch back because my harddrive switched modus because of Linux files (From NTFS to 4ex or something, I forgot). I'm currently typing this in the try out version of Ubuntu since I can't switch back to either Windows 7 or to the installed version of Ubuntu. So, my question follows: Can I fix it by keeping Ubuntu? Because I like Ubuntu. Also a side note: I'm a total noob when it comes down to this sort of things.

    Read the article

  • Can I install Ubuntu 13.10 without the internet?

    - by user1526570
    I'm new to Ubuntu and Linux in general. I'm currently out of town and the dorm I am living in has terrible internet connection. It won't be another 2-3 weeks before I can go home and have proper internet connection. So my question is whether or not I can install Ubuntu 13.10 in my laptop without the internet and then do the updates once I go home? Also, I'm attempting to do a dual boot with my Lenovo G505s which was pre-installed with Windows 8. Hopefully I can pull this off. I already did the necessary things (I think and hope so) prior to installation: Disable secure boot Enable legacy and boot UEFI first Create partition Put installer in my pen drive As I am quite new to this, any advice would be of great help. Thanks in advance! EDIT: I tried yesterday. The installation asked me to connect to the internet, so I used my crappy dorm internet. When it reached the downloading/installtion of Ubuntu One, it just stopped and went on forever. So I had to stop it.

    Read the article

  • Installing 11.10 on flash drive failed

    - by lakshitha
    This is my problem. I burned Ubuntu 11.10 iso to a CD. I was able to boot my PC with it. I plugged in my flash drive, and inserted the CD and restarted the computer to boot Ubuntu. I then chose to install Ubuntu alongside with Windows (XP prof.). Then I was able to select my flash drive as the installation location. I prepared partitons by dragging a bar and allocating the size for the Ubuntu installation, and for other files. I set 3GB for ubuntu and 1GB for other files. The pen drive was partitioned and files installed on it. After sucess I ejected the CD to restart the PC to use the new OS. When it restarted I expected to be asked to select an OS to boot. But I could only boot with Windows XP. Properties of my flash drive show its total capacity is 1GB. The partitioned 3GB is missing. How can I boot with the USB stick? How can I get my 4GB USB stick back?

    Read the article

  • From the Tips Box: Pre-installation Prep Work Makes Service Pack Upgrades Smoother

    - by Jason Fitzpatrick
    Last month Microsoft rolled out Windows 7 Service Pack 1 and, like many SP releases, quite a few people are hanging back to see what happens. If you want to update but still error on the side of caution, reader Ron Troy  offers a step-by-step guide. Ron’s cautious approach does an excellent job minimizing the number of issues that could crop up in a Service Pack upgrade by doing a thorough job updating your driver sets and clearing out old junk before you roll out the update. Read on to see how he does it: Just wanted to pass on a suggestion for people worried about installing Service Packs.  I came up with a ‘method’ a couple years back that seems to work well. Run Windows / Microsoft Update to get all updates EXCEPT the Service Pack. Use Secunia PSI to find any other updates you need. Use CCleaner or the Windows disk cleanup tools to get rid of all the old garbage out there.  Make sure that you include old system updates. Obviously, back up anything you really care about.  An image backup can be real nice to have if things go wrong. Download the correct SP version from Microsoft.com; do not use Windows / Microsoft Update to get it.  Make sure you have the 64 bit version if that’s what you have installed on your PC. Make sure that EVERYTHING that affects the OS is up to date.  That includes all sorts of drivers, starting with video and audio.  And if you have an Intel chipset, use the Intel Driver Utility to update those drivers.  It’s very quick and easy.  For the video and audio drivers, some can be updated by Intel, some by utilities on the vendor web sites, and some you just have to figure out yourself.  But don’t be lazy here; old drivers and Windows Service Packs are a poor mix. If you have 3rd party software, check to see if they have any updates for you.  They might not say that they are for the Service Pack but you cut your risk of things not working if you do this. Shut off the Antivirus software (especially if 3rd party). Reboot, hitting F8 to get the SafeMode menu.  Choose SafeMode with Networking. Log into the Administrator account to ensure that you have the right to install the SP. Run the SP.  It won’t be very fancy this way.  Maybe 45 minutes later it will reboot and then finish configuring itself, finally letting you log in. Total installation time on most of my PC’s was about 1 hour but that followed hours of preparation on each. On a separate note, I recently got on the Nvidia web site and their utility told me I had a new driver available for my GeForce 8600M GS.  This laptop had come with Vista, now has Win 7 SP1.  I had a big surprise from this driver update; the Windows Experience Score on the graphics side went way up.  Kudo’s to Nvidia for doing a driver update that actually helps day to day usage.  And unlike ATI’s updates (which I need for my AGP based system), this update was fairly quick and very easy.  Also, Nvidia drivers have never, as I can recall, given me BSOD’s, many of which I’ve gotten from ATI (TDR errors).How to Enable Google Chrome’s Secret Gold IconHTG Explains: What’s the Difference Between the Windows 7 HomeGroups and XP-style Networking?Internet Explorer 9 Released: Here’s What You Need To Know

    Read the article

  • Non-standard installation (installing Linux from Linux)

    - by Evan Plaice
    So, here's my setup. I have one partition with the newest version installed, a second partition with an older version installed (as a backup just in case), a swap partition that both share, and a boot partition so the bootloader doesn't need to be setup after each upgrade. Partitions: sda1 ext3 /boot sda2 ext4 / (current version) sda3 ext4 / (old version) sda4 swap /swap sda5 ntfs (contains folders symbolically linked to /home on /) So far it has been a very good setup. I can create new boot loaders without screwing it up and adding my personal files into a new install is as simple as creating some symbolic links (the partition is NTFS in case I need to load windows on the system again). Here's the issue. I'd like to be able to drop the install into /distro on the current version and install a new version on / on the old version effectively replacing/upgrading it. The goal is to be able to just swap out new versions as they are released while maintaining redundancy in case I don't like th update. So far I have: downloaded the install.iso created a folder in /distro copied the install.iso into /distro extracted vmlinuz and initrd.lz into /distro Then I modified /boot/grub/menu.lst with the following entry: title Install Linux root (hd0,1) kernel /distro/vmlinuz initrd /distro/initrd.lz vmlinuz loads perfectly but it says it can't find initrd.lz on boot. I have also tried to uncompress the image with: unlzma < initrd.lz > initrd.img And, updating the menu.lst file to match; but that doesn't work either. I'm assuming that vmlinuz (linux kernel) loads, fires up the virtual filesystem by creating a ramdisk (initrd), mounts the iso, and launches the installer. Am I missing something here? Update: First, I wanted to say that the accepted answer would have been the best option if I was doing a normal Ubuntu install. Unfortunately, I was installing Linux Mint (which lacks the script needed to make debootstrap work. So the problem I with the above approach was, I was missing the command that vmlinuz (linux kernel) needed to execute to start boot into LiveCD mode. By looking in the /boot/grub/grub.cfg file I found what I was missing. Although this method will work, it requires that the installation files reside on their own partition. I took the easy route and used unetbootin to drop the LiveCD on a usb drive and booted from that. Like I said before. Debootstrap would have been the ideal solution here. Even though I couldn't use it I wrote down the steps it would've taken to use it. Step One: Format sda3 (the partition with the old copy of linux that's being overwritten) I used gparted to format it as ext4 from within the current linux install. How this is done varies based on what tools you prefer to use. Step Two: Mount the newly formatted partition (we'll call the mount ubuntu for simplicity) sudo mkdir /mnt/ubuntu sudo mount -o -loop /dev/sda3 /mnt/ubuntu Step Three: Get debootstrap sudo apt-get install debootstrap Step Four: Mount the install disk (replace ubuntu.iso with the name if your install disk) sudo mkdir /media/cdrom sudo mount -o loop ~/ubuntu.iso /media/cdrom Step Five: Install the OS using debootstrap (replace fiesty with the version you're installing and amd64 with your processor's architecture) sudo debootstrap --arch amd64 fiesty /mnt/ubuntu file:/media/cdrom The settings here varies. While I loaded debootstrap using an install iso, you can also have debootstrap automatically download and install if with a repository link (While most of these repositories contain debian versions I'm still not clear as to whether Ubuntu has similar repositories). Here a list of the debian package repositories and their mirrors. This is how you'd deploy debootstrap if you were doing it directly from a repository: sudo debootstrap --arch amd64 squeeze /mnt/debian http://ftp.us.debian.org/debian Here's the link that I primarily used to figure this out.

    Read the article

  • Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

    - by Arkadius
    I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

    Read the article

  • Warning message during boot after installation of kernel 3.3: Kernel needs AppArmor 2.4 compatibility patch

    - by Matus Frisik
    I have Ubuntu Server 11.10 and after installation of kernel 3.3 (I just followed instructions from site www.upbuntu.com - How To Install Linux 3.3 Kernel In Ubuntu 11.10/12.04) It shows me following message during boot: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda5: clean, 204099/1152816 files, 988854/4608639 blocks /dev/sda6: clean, 2345/1281120 files, 142711/5120710 blocks modem-manager[830]: ModemManager (version 0.5) starting... * Starting mDNS/DNS-SD daemon [154G[ OK ] * Starting CUPS printing spooler/server [154G[ OK ] * Starting Mount network filesystems [154G[ OK ] * Stopping Mount network filesystems [154G[ OK ] * Starting System V initialisation compatibility [154G[ OK ] * Stopping Failsafe Boot Delay [154G[ OK ] Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/bin.ping (/etc/apparmor.d/bin.ping line 28): profile /bin/ping network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/lightdm-guest-session (/etc/apparmor.d/lightdm-guest-session line 71): profile /usr/lib/lightdm/lightdm-guest-session-wrapper network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.dhclient (/etc/apparmor.d/sbin.dhclient line 73): profile /sbin/dhclient network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.klogd (/etc/apparmor.d/sbin.klogd line 35): profile /sbin/klogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslog-ng (/etc/apparmor.d/sbin.syslog-ng line 52): profile /sbin/syslog-ng network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslogd (/etc/apparmor.d/sbin.syslogd line 40): profile /sbin/syslogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile /usr/lib/chromium-browser/chromium-browser network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_java network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_openjdk network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-previewer network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-thumbnailer network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.deliver (/etc/apparmor.d/usr.lib.dovecot.deliver line 24): profile /usr/lib/dovecot/deliver network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.dovecot-auth (/etc/apparmor.d/usr.lib.dovecot.dovecot-auth line 24): profile /usr/lib/dovecot/dovecot-auth network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap (/etc/apparmor.d/usr.lib.dovecot.imap line 23): profile /usr/lib/dovecot/imap network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap-login (/etc/apparmor.d/usr.lib.dovecot.imap-login line 22): profile /usr/lib/dovecot/imap-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.managesieve-login (/etc/apparmor.d/usr.lib.dovecot.managesieve-login line 22): profile /usr/lib/dovecot/managesieve-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3 (/etc/apparmor.d/usr.lib.dovecot.pop3 line 22): profile /usr/lib/dovecot/pop3 network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3-login (/etc/apparmor.d/usr.lib.dovecot.pop3-login line 21): profile /usr/lib/dovecot/pop3-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/mission-control-5 network rules not enforced Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/telepathy-* network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.avahi-daemon (/etc/apparmor.d/usr.sbin.avahi-daemon line 30): profile /usr/sbin/avahi-daemon network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/lib/cups/backend/cups-pdf network rules not enforced Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/sbin/cupsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dnsmasq (/etc/apparmor.d/usr.sbin.dnsmasq line 51): profile /usr/sbin/dnsmasq network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dovecot (/etc/apparmor.d/usr.sbin.dovecot line 37): profile /usr/sbin/dovecot network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.identd (/etc/apparmor.d/usr.sbin.identd line 31): profile /usr/sbin/identd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mdnsd (/etc/apparmor.d/usr.sbin.mdnsd line 35): profile /usr/sbin/mdnsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mysqld (/etc/apparmor.d/usr.sbin.mysqld line 44): profile /usr/sbin/mysqld network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nmbd (/etc/apparmor.d/usr.sbin.nmbd line 21): profile /usr/sbin/nmbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nscd (/etc/apparmor.d/usr.sbin.nscd line 46): profile /usr/sbin/nscd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.smbd (/etc/apparmor.d/usr.sbin.smbd line 40): profile /usr/sbin/smbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.tcpdump (/etc/apparmor.d/usr.sbin.tcpdump line 64): profile /usr/sbin/tcpdump network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.traceroute (/etc/apparmor.d/usr.sbin.traceroute line 26): profile /usr/sbin/traceroute network rules not enforced * Starting AppArmor profiles [160G [154G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher Checking for running unattended-upgrades: What does this warnings mean and how can I fix it? Informations about my system: response@response:~$ uname -a Linux response 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 01:43:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • Problem adding "Network Policy and Access Services" role in Server 2008

    - by Django Reinhardt
    We are encountering an Error Code 0x80070643 when attempting to add the "Network Policy and Access Services" role on a fresh Windows Server 2008 R2 installation. Is there a known solution for this problem? Here is what information we have available so far: From ServerManager.log... 2504: 2009-11-23 11:12:01.712 [CBS] installing 'IAS NT Service RasServerAll RasRoutingProtocols ' ... 2504: 2009-11-23 11:12:01.911 [CBS] ...parents that will be auto-installed: 'RasServer ' 2504: 2009-11-23 11:12:01.912 [CBS] ...default children to turn-off: '<none>' 2504: 2009-11-23 11:12:01.924 [CBS] ...current state of 'IAS NT Service': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.924 [CBS] ...setting state of 'IAS NT Service' to 'InstallRequested' 2504: 2009-11-23 11:12:01.935 [CBS] ...current state of 'RasServerAll': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.935 [CBS] ...setting state of 'RasServerAll' to 'InstallRequested' 2504: 2009-11-23 11:12:01.946 [CBS] ...current state of 'RasRoutingProtocols': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.946 [CBS] ...setting state of 'RasRoutingProtocols' to 'InstallRequested' 2504: 2009-11-23 11:12:01.956 [CBS] ...current state of 'RasServer': p: Staged, a: Staged, s: UninstallRequested 2504: 2009-11-23 11:12:01.956 [CBS] ...setting state of 'RasServer' to 'InstallRequested' 2504: 2009-11-23 11:12:01.967 [CBS] ...'IAS NT Service' : applicability: Applicable 2504: 2009-11-23 11:12:01.977 [CBS] ...'RasServerAll' : applicability: Applicable 2504: 2009-11-23 11:12:01.987 [CBS] ...'RasRoutingProtocols' : applicability: Applicable 2504: 2009-11-23 11:12:01.998 [CBS] ...'RasServer' : applicability: Applicable 2504: 2009-11-23 11:12:02.906 [CbsUIHandler] Initiate: 2504: 2009-11-23 11:12:02.906 [InstallationProgressPage] Installing... 2504: 2009-11-23 11:12:54.311 [CbsUIHandler] Error: -2147023293 : 2504: 2009-11-23 11:12:54.313 [CbsUIHandler] Terminate: 2504: 2009-11-23 11:12:54.316 [InstallationProgressPage] Verifying installation... 2504: 2009-11-23 11:12:54.326 [CBS] ...done installing 'IAS NT Service RasServerAll RasRoutingProtocols '. Status: -2147023293 (80070643) 2504: 2009-11-23 11:12:54.329 [NPAS] Skipped configuration of 'Network Policy Server' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Remote Access Service' because install operation failed. 2504: 2009-11-23 11:12:54.330 [NPAS] Skipped configuration of 'Routing' because install operation failed. 2504: 2009-11-23 11:12:54.330 [Provider] [STAT] ---- CBS Session Consolidation ----- [STAT] For 'Network Policy Server', 'Remote Access Service', 'Routing'[STAT] installation(s) took '52.616957' second(s) total. [STAT] Configuration(s) took '0.0004948' second(s) total. [STAT] Total time: '52.6174518' second(s). From System Event Viewer... Log Name: System Source: Service Control Manager Date: 23/11/2009 11:12:23 Event ID: 7023 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Av7Analytics Description: The Network Policy Server service terminated with the following error: %%-2147013892 Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7023</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:23.653578500Z" /> <EventRecordID>1317</EventRecordID> <Correlation /> <Execution ProcessID="468" ThreadID="2308" /> <Channel>System</Channel> <Computer>Av7Analytics</Computer> <Security /> </System> <EventData> <Data Name="param1">Network Policy Server</Data> <Data Name="param2">%%-2147013892</Data> </EventData> </Event> From Setup Event Viewer... Log Name: Setup Source: Microsoft-Windows-ServerManager Date: 23/11/2009 11:12:56 Event ID: 1616 Task Category: None Level: Error Keywords: User: AV7ANALYTICS\RenamedAdmin Computer: Av7Analytics Description: Installation failed. Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-ServerManager" Guid="{8C474092-13E4-430E-9F06-5B60A529BF38}" /> <EventID>1616</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2009-11-23T11:12:56.046431200Z" /> <EventRecordID>115</EventRecordID> <Correlation /> <Execution ProcessID="2504" ThreadID="2344" /> <Channel>Setup</Channel> <Computer>Av7Analytics</Computer> <Security UserID="S-1-5-21-2753803390-1569373846-1208217686-500" /> </System> <UserData> <EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS"> <message> Roles: Network Policy and Access Services Error: Attempt to install Network Policy Server failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Remote Access Service failed with error code 0x80070643. Fatal error during installation Error: Attempt to install Routing failed with error code 0x80070643. Fatal error during installation The following role services were not installed: Network Policy Server Routing and Remote Access Services Remote Access Service Routing </message> <identifiers>14, 206, 207, 208, 205</identifiers> </EventXML> </UserData> Thanks in advance for any help. It's quite shocking that we're already having problems with Microsoft's "latest and greatest".

    Read the article

  • vmware network installation problem

    - by shantanu
    After installation from vmware_bunddle it shows network device error during configuration(First run). Log File: 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Log for VMware Workstation pid=5766 version=8.0.2 build=build-591240 option=Release 2012-04-03T20:01:24.881+06:00| vthread-3| I120: The process is 64-bit. 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Host is Linux 3.2.0-19-generic Ubuntu precise (development branch) 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.880+06:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.880+06:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.881+06:00| vthread-3| I120: PREF Failed to load user preferences. 2012-04-03T20:01:24.881+06:00| vthread-3| W110: Logging to /tmp/vmware-root/modconfig-5766.log 2012-04-03T20:01:25.200+06:00| vthread-3| I120: modconf query interface initialized 2012-04-03T20:01:25.201+06:00| vthread-3| I120: modconf library initialized 2012-04-03T20:01:25.269+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.284+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.306+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.355+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.355+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.362+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.383+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.434+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.502+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.507+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.511+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.516+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.521+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.561+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.566+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.571+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.576+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.581+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.593+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.614+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.663+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.740+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.747+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.752+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.757+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.762+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.772+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.792+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.843+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:26.838+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.848+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.853+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.858+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.863+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:28.460+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:28.460+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:28.466+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:28.488+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:28.542+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:28.542+06:00| vthread-3| I120: Building module vmmon. 2012-04-03T20:01:28.553+06:00| vthread-3| I120: Extracting the sources of the vmmon module. 2012-04-03T20:01:28.615+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:01:36.499+06:00| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:01:36.507+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmmon.ko 2012-04-03T20:01:58.314+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:58.315+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:58.336+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:58.379+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Building module vmnet. 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Extracting the sources of the vmnet module. 2012-04-03T20:01:58.541+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:05.973+06:00| vthread-3| I120: Failed to compile module vmnet! 2012-04-03T20:02:05.984+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:05.984+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:05.990+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:06.015+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Building module vmblock. 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Extracting the sources of the vmblock module. 2012-04-03T20:02:06.141+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:13.531+06:00| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:13.532+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmblock.ko 2012-04-03T20:02:19.090+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:19.090+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:19.097+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:19.117+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:19.173+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:19.173+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:02:19.174+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:02:19.284+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:28.525+06:00| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:28.526+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmci.ko 2012-04-03T20:02:31.760+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:31.760+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:31.766+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:31.786+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:31.838+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:31.838+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:02:31.839+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:02:31.864+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:33.684+06:00| vthread-3| I120: Building module vsock. 2012-04-03T20:02:33.685+06:00| vthread-3| I120: Extracting the sources of the vsock module. 2012-04-03T20:02:33.809+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:41.050+06:00| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:41.051+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vsock.ko 2012-04-03T20:03:02.757+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.762+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.767+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.771+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.776+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:02.790+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:02.814+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:02.865+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:02.958+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.968+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.973+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.978+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.983+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:04.372+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:04.372+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:04.378+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:04.399+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Building module vmmon. 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Extracting the sources of the vmmon module. 2012-04-03T20:03:04.486+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:05.976+06:00| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:05.977+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmmon.ko 2012-04-03T20:03:09.056+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:09.057+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:09.065+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:09.090+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Building module vmnet. 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Extracting the sources of the vmnet module. 2012-04-03T20:03:09.169+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:12.072+06:00| vthread-3| I120: Failed to compile module vmnet! 2012-04-03T20:03:12.090+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:12.090+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:12.098+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:12.121+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Building module vmblock. 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Extracting the sources of the vmblock module. 2012-04-03T20:03:12.205+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:15.340+06:00| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:15.341+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmblock.ko 2012-04-03T20:03:18.451+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:18.451+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:18.457+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:18.480+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:03:18.569+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:19.787+06:00| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:19.789+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmci.ko 2012-04-03T20:03:22.933+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:22.933+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:22.939+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:22.959+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:03:23.034+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:24.227+06:00| vthread-3| I120: Building module vsock. 2012-04-03T20:03:24.227+06:00| vthread-3| I120: Extracting the sources of the vsock module. 2012-04-03T20:03:24.254+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:26.125+06:00| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:26.126+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vsock.ko My System details: cpu : AMD APU dual core E450 ram: 2GB ubuntu: 12.04 (64 bit) I have downloaded Latest vmware version. Thanks in advance

    Read the article

  • Why does Dropbox fail with a "dropboxd not found" error?

    - by Kevin
    This is a fresh install of Dropbox on a 12.04 server running on a 32bit system. It does not seem to fail the installation, but when I try to run it, I am told it can't find the file. Following the instructions on the Dropbox site, I get the following message: /home/kevin/.dropbox-dist/dropboxd: 10: exec: /home/kevin/.dropbox-dist/dropbox: not found Permissions currently being used: $ ls -l ~/.dropbox-dist/dropboxd -rwxrwxrwx 1 kevin kevin 258 Jun 13 20:40 /home/kevin/.dropbox-dist/dropboxd Has anyone had this problem and know a work around?

    Read the article

  • How to fix the "Setting locale failed" error while installing vim?

    - by user211775
    When installing vim through Software Center , I get this error installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: install-info Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1

    Read the article

  • Cannot save tar.gz file to usr/local

    - by ATMathew
    I'm using the following instruction to install and configure Hadoop on Ubuntu 10.10. http://www.michael-noll.com/tutorials/running-hadoop-on-ubuntu-linux-single-node-cluster/#installation I tried to save the compressed tar.gz file to /usr/local/ but it just won't save. I've tried saving the tar.gz in my home folder and desktop and copying the files to the desired folder, but I get an error that tells me I don't have permission. How do I save and extract a tar.gz folder to /usr/local/hadoop?

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >