Search Results

Search found 18781 results on 752 pages for 'ip port'.

Page 25/752 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Duplicate IP address detection with multiple NICs

  - by sfink

  I am using arping -D to detect duplicate IP addresses within a network when setting up servers. (The network is controlled by someone else, and we have had many issues with IP allocation in the past.) It works fine as long as my host has a single NIC on a given VLAN, but when my host has more than one (I have one with 9 NICs on one VLAN and 1 on the other), arping -D always returns false collisions. The problem is that all 9 of my NICs respond to an ARP request for any of the IPs on those NICs. (These are real physical NICs, not aliases or anything.) I send out one ARP request packet, and get 9 ARP is-at ARP replies, one for each MAC address. I could implement my own solution by sniffing packets and checking for any replies with a MAC address other than the local NICs', but it seems like there ought to be an easier way.

  Read the article

• Problem Assigning Static IP to CentOS Server

  - by nategood

  We have a sandbox server running CentOS that we run inside our office. Our ISP has assigned us a block of 5 static IPs. We now want to assign it a static IP. DEVICE=eth0 BOOTPROTO=none # have also tried "static" here HWADDR=00:13:72:*:*:* ONBOOT=yes TYPE=Ethernet NETMASK=255.255.255.0 IPADDR=173.*.*.161 GATEWAY=10.1.10.1 /etc/resolv.cnf is also set with the appropriate name servers from our ISP. When I ifdown eth0 then ifup eth0 I get... SIOCADDRT: Network is unreachable When I switch to DCHP, the machine has an IP assigned and there are no connection problems. Any ideas?

  Read the article

• Subnet mask and how to resolve IP range [duplicate]

  - by user2789433

  This question already has an answer here: How does IPv4 Subnetting Work? 5 answers If you click on this link WHO IS query You will see the results from a who is query for a random IP address. On the line "inetnum": "122.4.0.0/14", What does it mean for the prefix to be 14? I am using this as a reference Subnet Mask Cheatsheet While resolving it, I get a very wide range which is something like 122.7.0.0-122.4.0.0 I am not able to understand how the IP range is calculate from the subnet mask and I am only able to find calculators online and not a method to solve it.

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Relaying requests between third party server and Heroku for static IP

  - by Gady

  I have a rails application hosted on Heroku that I need to integrate with 3rd party payments provider. The payment provider requires that my application will have a static IP for incoming and outgoing HTTPS requests. I want to deploy a proxy on a Linode VPS so it can relay the information as a proxy. Relaying the request to the service provider seems easy, I just use their IP. Can I relay requests coming from the service provider to the heroku application? Can I realy the request using a URL (https://myapp.herokuapp.com) ? What is the recommended proxy server to use?

  Read the article

• Email Tracking - By IP

  - by disasm

  I am trying to track an Email I received to see where it originated from (harmful scam Email). Here is the full header: Received-SPF: pass (domain of aol.com designates 205.188.109.203 as permitted sender) ZSwgeW91ciBpbmZvcm1hdGlvbiBoYXMgYmVlbiBhY2NlcHRlZCBhbmQgYXBw cm92ZWQgYnkgb3VyIFJlY3J1aXRpbmcgRGVwYXJ0bWVudC4gWU9VUiBGSVJT VCBBU1NJR05NRU5UIERFVEFJTFMuIFdlc3Rlcm4gVW5pb24gTW9uZXkgVHJh bnNmZXIgaGFkIHJlcG9ydHMgYWJvdXQgbGFwc2VzIGluIHRoZSBzZXJ2aWNl cyBvZiBzb21lIG9mIHRoZWlyIG91dGxldHMgYW5kIHNvbWUgbwEwAQEBAQN0 ZXh0L3BsYWluAwMwAgN0ZXh0L2h0bWwDAzIx X-YMailISG: HeDj35sWLDvNbQaO2B72kIm7hhiubE2qUysyBFo2m3GE4wsk FOs6uaYWwBVUBbL_ubGEs5Gitm1b86QFPuQYdS3g5s2f_uY3dyHhXh7DcBIB Ad4mJBzeRozs5.0s6vbqhsIEYlaKI4EDrsocJEbDbTUiUq2UyxZ7Ery8Iqow _sBVN0msHJvcI09KwmaXUteV_qCL7qFlj7WNSmdMM.wVUm3pyiWzw1VUZlyD nwoEzdEImQdwmJqoTM1YE8XU6BE8IkmUkh1Z8XkfLtHqmAsPi1_.Msbi8ubk QD71BcTABjb7ixELg5NfomsyZKVN.9G.TnuISlX5umByjS701ITyQ2PUYXai hoVCWg37bKWNR9MAWdogUK8PIV3MWPv5gdglNAKuPdS5Z7.01J39UGyH7R60 aIiIWdAsQ7_3VQBgIi9Seg2YM2j1U5g9QtdcJxBe0.1oigmj7G2sC9.YXNGX 3abQ1EcWVlJLuSuBbQ4Flpbe_Y3_ssz8nZIK2YjKy0U8WWe77vfnxdEBsknf w2OA_PAzHtuAAuxETnAOU_MeMIssgRAtihKC_26Au1LnKYCGPGADFBLaLNHF 30itI.kBvUjdvUfqV11dnGe50kFVzBGDMJFm8mXvb5WtIKq6qU1ZZmUroCew EgXjVZ.JKbux2KQmHh2zZbIJO3nOmLGkzuRczYiWCUNBDtmUZE6imuIQ4P6S RjusSbMITf2fIL_xe.qFCnW563sOdc4u.uXLDx.lq30740l8lWkkLX6KaDMF k9TY0VQKsMynqa4vXKpkTVNdukAcGd0p2i3newxY4q_9eZLn9czsJimfpKNW SX1bqjs0iCQHb4FTydf1Zpa2b.6lIhdjVlIM8tiWhfGhlUeM267T3njEM6nz 0vxyjparR_G_s0VnIVhSeLw2F5KpAL226w2yA.WBcqoG2ROSa7fK.0ZYwy36 Qcmk8C.HKj8Fng1qFLtEfaI4F66rCEJi7h1d6EK0Jk4a_TJnBBub1VQVoU.s SJ2ehs8aDjDqJw27_Ia4vYekKhIU8Oak0vYSmMXhZ5IvJfGfOHYVy4ebkoQf IDE3lSfex1nHZqcMqq0agPOZUOdznSIGJVx4T8m6MGwrEouvL.grhT6KUJQ5 g8UX6DVTgj.8lHuTyOzj3A3NRwDFs2JqicprOMJRS4UWYX8eQ1y4j.4ora36 LnWYm7k1n6X0lDBW5ZdZlsLy7.0al0G1uCIAZwBNo7FnHr6q2mQNwgFaPkNO FOiykqFHu0khLO_cZw87MpDslZO_3lFbJGlnchSs81hkESSQsldUxqdNkIV. yWsS58p1uuwVNksp4NB.QW41wfBtY5FU.Q80g8KiOZIz0daou3GlzoahcHoQ GPgSa86GKtSo.ew2xEUKk6c.ffAT9RjqNh5fzyhBdzEYURxJBYgMlL5DQp2G yYIGhlIS5h9JzPFVkk2XhBoY2NgEAAfJfAfqKoMNNKIW.bEwbgNa9xtSzHNg YdmDfOSkYkAGZDqwa.uONguq5.jqtnWDnx3GDyuoVg-- X-Originating-IP: [205.188.109.203] Authentication-Results: mta1343.mail.bf1.yahoo.com from=aol.com; domainkeys=neutral (no sig); from=mx.aol.com; dkim=pass (ok) Received: from 127.0.0.1 (EHLO omr-d06.mx.aol.com) (205.188.109.203) by mta1343.mail.bf1.yahoo.com with SMTP; Fri, 18 Oct 2013 10:11:15 -0700 Received: from mtaomg-da05.r1000.mx.aol.com (mtaomg-da05.r1000.mx.aol.com [172.29.51.141]) by omr-d06.mx.aol.com (Outbound Mail Relay) with ESMTP id ACFAD7012DFB4 for <.confidential.; Fri, 18 Oct 2013 13:11:15 -0400 (EDT) Received: from core-mfb002c.r1000.mail.aol.com (core-mfb002.r1000.mail.aol.com [172.29.47.199]) by mtaomg-da05.r1000.mx.aol.com (OMAG/Core Interface) with ESMTP id 2ADB6E000089 for <.confidential.; Fri, 18 Oct 2013 13:11:15 -0400 (EDT) References: <[email protected] <[email protected] <[email protected] To: .confidential. Subject:.confidential. In-Reply-To: <[email protected] X-MB-Message-Source: WebUI MIME-Version: 1.0 From: .confidential. X-MB-Message-Type: User Content-Type: multipart/alternative; boundary="--------MB_8D09A3C2FD3105D_1338_33A66_webmail-d257.sysops.aol.com" X-Mailer: AOL Webmail 38109-STANDARD Received: from 66.199.226.81 by webmail-d257.sysops.aol.com (205.188.17.42) with HTTP (WebMailUI); Fri, 18 Oct 2013 13:11:15 -0400 Message-Id: <[email protected] X-Originating-IP: [66.199.226.81] Date: Fri, 18 Oct 2013 13:11:15 -0400 (EDT) x-aol-global-disposition: G DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20121107; t=1382116275; bh=9TXLF90L8beaMnjNzoKDwcv3Eq06jiZGN40YTBw2YOI=; h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type; b=xHVjoH5AccrOpPZoZZW+b41uJ7nzHDrryGsO6WzvtBOFGWX3xJMO3RB1ILFlJAsF6 P9olk8Gz6LDydX9SOZ4w/yPI8y8eU6z1AauwOPxw9F1lu82goIGwK3jIcvOv72koB5 Izq9By7L6PESEmmJ5nFc4ko9vH2CBMcJKPV95HTg= x-aol-sid: 3039ac1d338d52616bb37d53 Content-Length: 26445 The Email was from the aol domain, so I understand the IP of aol. My question is, looking at 66.199.226.81 , would it be safe to say that the Email originated from "Access Integrated Technologies"? Thanks for any help!

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Force an LXC container to use its own IP address

  - by emma sculateur

  Sorry if this question has already been asked. I could not find it, I have this setup : +---------------------------------------------------------------------------------------------+ |HOST | | | | +-------------------------------------------------+ | | | UBUNTU-VM | | | | | | | | +-------------------+ | | | | |UBUNTU-LXC | | +------------------+ | | | | 10.0.0.3/24 | 10.0.0.1/24 | |OTHER VM | | | | | eth0-----lxcbr0----------eth0-----------br0----------eth0 | | | | | | 192.168.100.2/24| 192.168.100.1/24 |192.168.100.3/24 | | | | +-------------------+ | +------------------+ | | +-------------------------------------------------+ | +---------------------------------------------------------------------------------------------+ When I ping 192.168.100.3 from my UBUNTU-LXC, the source IP address is automatically changed to 192.168.100.2 by UBUNTU-VM. It's like having a NAT, whereas I really want my UBUNTU-LXC to talk with it own IP address. Is there any way to do this ? Edit : these info may be relevant : I am using KVM +libvirt to set up my VMs Here is how I create my interface in UBUNTU-VM : <interface type='bridge'> <mac address='52:54:00:cb:aa:74'/> <source bridge='br0'/> <model type='e1000'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/> </interface>

  Read the article

• Wireless connection switches off IP address

  - by Sanjay Gupta

  I have a Lenovo laptop with windows XP and a wireless connection at home. The wireless connection works when initially I switch on the computer. but if I leave it for even 5 minutes, the wireless is gone. Then I have to shut it off and start computer all over again, waiting for 5 minutes. Even if the wireless speed is 48Mbps or better, it gives the message "Renewing IP address" and gets stuck there not moving to the next stage. Other laptop in the household works fine and can be left on. Why does this happen ? I suspect that IP address is the problem and somehow is not registered in all the necessary files.

  Read the article

• Accessing the physical IP address of a computer on my network that is no longer available

  - by floebs

  I'm trying to find out how to access the IP address of a computer (macbook pro) that I once had on my network at home. Does terminal store the 'connected' or 'linked' computer ID or IP of a networked computer anywhere that I can access after the laptop is no-longer within range? The laptop was part of my airport extreme network, its now out of range (stolen!), and I would like to know if its possible to discover the physical address of that laptop, even though I no-longer have physical access to the laptop. I have my airport extreme configured (somewhere??) to sniff out that laptop if it comes within range, and then connect to it. Where would this 'configured info' be stored on my desktop?

  Read the article

• IP addresses not updating, but showing correctly in the DHCP Address Leases

  - by Bobby

  I first noticed this when I tried a RDP to wxp-38-shop and it connected me to the computer wxp-alvinm As you can see in the picture I pinged wxp-38-shop and it shows a different IP then whats given in the Address Leases page (w2k3 server). I tried to do ipconfig /flushdns on the server as well as the client computer, but it didn't update that way. If I do an ipconfig on wxp-38-shop is also shows 192.168.0.153, so why when I ping it from any other computer why would it be showing the wrong IP?

  Read the article

• Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

  - by gvkv

  I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

  Read the article

• Direct wan ip behind router

  - by DanSpd

  I need to have a wan ip to be listen in ipconfig but computer is behind router.

  Read the article

• bad switchs duplicate my ip

  - by tacoen

  I had a large area LAN. There were many switch and AP on it, then somehow I couldn't ping my servers, and it's said that the IP was duplicated. I use arpwatch and found out that one of the switch flip-flop-ing the IP. I isolated that troublesome switch using his mac-address. But, since this a large area LAN... I doubt this will be the last cases. If there any software or hardware that I can use to prevent this kind of error? Sorry for my bad English.

  Read the article

• Accessing locally hosted webpage via public IP

  - by Mk12

  Sorry if this is in the wrong place.I don't really know anything about server-related things, but I'm really curious about this. On my mac I figured out how to make a simple web page viewable via the local ip address or computer name on the LAN, and also how to hook it up with a free hostname from dyndns.com. So the dyndns hostname points to something, how can I access it directly? Typing in the global ip address (of the router) doesn't work, but if it did, how would it know which computer to point to? There must be some way of directly accessing what dyndns hostname points to by typing in some number, right? Sorry I don't really understand how it works.

  Read the article

• Block (or only allow certian) incoming IP addresses on Verizon FIOS Actiontec Router

  - by jmlumpkin

  I opened a few ports to the outside of my home network so I can get into a few of my machines from outside. When checking some logs, I noticed that I was getting scanned on some ports from various other countries. I already moved my port forward to a non-standard port. I would like to be able to block specific IP's (or even subnets) from my Verizon FIOS router. There is a little bit of documentation online, but I can't find anything specific on how to do this. To start, I just want to block a specific IP. But if it is not to hard, I would also like to know how to possibly block a range of IPs. And with the inverse of this - is there a way to allow only certain IPs or range?

  Read the article

• Can't access server from external IP

  - by Mathias

  I have a problem with my web server; I can't access it from the external IP address. I'm using an IIS 7 server, but I've tried with apache on Linux as well. I have forwarded all traffic on port 80 to my computer, but it just won't work. I've done port forwarding with my Minecraft server, and it did work, but when I try it with a web server, no. I've been looking on many many forums, but their methods don't work for me. My router is a Speedport W 723V, if anyone knows that one. Any help is appreciated.

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• ip recognition is different

  - by Cougar

  some months ago i bought a dedicated server from usa (http://www.dacentec.com/) datacenter. my ips are look like this : 162.248.243.blo blo blo when i check my ip in this site : http://whatismyipaddress.com/ it shows me : ISP: Dacentec Services: None Detected Country: United States why Services: None Detected and what did they do with this ip block? also when i open some sites like google, yahoo, etc they show me india or china as country. what is the problem about these ips and why i don't have a stable location for them?

  Read the article

• Unmasking fake IP address

  - by Omousso

  I need to unmask I masked IP..that has hacked my account & a family members account(s)... Can anyone help me...I have know no Idea where to start and know nothing about even where to begin. PLEASE someone reply, this is not a random hacking but someone trying to cause my family trouble...at least my instinct says so. My family member and myself both believe we know who it is.. They have gotten into several of my accounts and I've been acting is I don't know...tracking ip's..but I feel like they are masked! Also, my family member changed there email/password numerous time and they still got in....how?? Any & all help is appreciated!!

  Read the article

• Python: Socket set source port number

  - by beratch

  Hi all, I'd like to send a specific UDP broadcast packet.. unfortunatly i need to send the udp packet from a very specific port for all packet I send. Let say I broadcast via UDP "BLABLAH", the server will only answer if my incoming packet source port was 1444, if not the packet is discarded. My broadcast socket setup look like this : s = socket(AF_INET,SOCK_DGRAM) s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1) How can i do that (set the source port) in python ? Thanks!

  Read the article

• Parallel port recording to file on Win XP

  - by Nikola Kotur

  Hi there. I need to write a simple program that records all the input from parallel port into a file. Data flows from industrial machine, setup is fairly simple, but I can't find any good open source examples on parallel port reading for Windows. Do you know a software that does this (and lets me learn how to do it myself), or is there any guideline for parallel port programming on XP? Thanks.

  Read the article

• Programmatically talking to a Serial Port in OS X or Linux

  - by deadprogrammer

  I have a Prolite LED sign that I like to set up to show scrolling search queries from a apache logs and other fun statistics. The problem is, my G5 does not have a serial port, so I have to use a usb to serial dongle. It shows up as /dev/cu.usbserial and /dev/tty.usbserial . When i do this everything seems to be hunky-dory: stty -f /dev/cu.usbserial speed 9600 baud; lflags: -icanon -isig -iexten -echo iflags: -icrnl -ixon -ixany -imaxbel -brkint oflags: -opost -onlcr -oxtabs cflags: cs8 -parenb Everything also works when I use the serial port tool to talk to it. If I run this piece of code while the above mentioned serial port tool, everthing also works. But as soon as I disconnect the tool the connection gets lost. #!/usr/bin/python import serial ser = serial.Serial('/dev/cu.usbserial', 9600, timeout=10) ser.write("<ID01><PA> \r\n") read_chars = ser.read(20) print read_chars ser.close() So the question is, what magicks do I need to perform to start talking to the serial port without the serial port tool? Is that a permissions problem? Also, what's the difference between /dev/cu.usbserial and /dev/tty.usbserial?

  Read the article

• Issues writing to serial port on MAC OSX using unistd.h in c

  - by Schuyler

  I am trying to write to a bluetooth device on MAC OSX using the unistd.h Linux functions in c. I am connecting fine and writing the first few bytes with success. When I try to write other commands to it (there are bytes added to the write buffer every 15ms), I don't see any results even though the write() function returns 1 (write success). If you start a write and it doesn't finish by the time you try to start another write (since it is non-blocking), could that possibly screw up the initial write? (If so, is there any way to check if a write has completed?) That is the only thing I can think of since the writes are occurring fairly frequently and the first two are successfully sent. qwbyte() simply adds a byte to the output array and increments its length The open port function: BAMid = -1; struct termios options; struct termios originalTTYAttrs; // Open the serial port read/write, nonblocking, with no controlling terminal, and don't wait for a connection. BAMid = open(strPath, O_RDWR | O_NOCTTY | O_NONBLOCK); if (BAMid == -1) { printf("Error opening serial port %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Issue TIOCEXCL ioctl to prevent additional opens except by root-owned processes. if (ioctl(BAMid, TIOCEXCL) == -1) { printf("Error setting TIOCEXCL on %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // Get the current options and save them so we can restore the default settings later. if (tcgetattr(BAMid, &originalTTYAttrs) == -1) { printf("Error getting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } // The serial port attributes such as timeouts and baud rate are set by modifying the termios // structure and then calling tcsetattr() to cause the changes to take effect. Note that the // changes will not become effective without the tcsetattr() call. options = originalTTYAttrs; // Set raw input (non-canonical) mode, with reads blocking until either a single character // has been received or a one second timeout expires. [should be moot since we are leaving it as nonblocking] cfmakeraw(&options); options.c_cc[VMIN] = 1; options.c_cc[VTIME] = 10; cfsetspeed(&options, B57600); // Set 57600 baud options.c_cflag |= CS8; // Use 8 bit words // Cause the new options to take effect immediately. if (tcsetattr(BAMid, TCSANOW, &options) == -1) { printf("Error setting tty attributes %s - %s(%d).\n", strPath, strerror(errno), errno); goto error; } //flush old transmissions if (tcflush(BAMid,TCIOFLUSH) == -1) { printf("Error flushing BAM serial port - %s(%d).\n", strerror(errno), errno); } oBufLength = 0; // Ask it to start if (! qwbyte(CmdStart) ) { goto error; } if (! qwbyte(CmdFull) ) { goto error; } //this transmit works txbytes(); printf("success opening port!"); return -1; // Failure path error: if (BAMid != -1) { close(BAMid); } printf("returning an error--%d",errno); return errno; } The write function (txbytes): int i, bufSize, numBytes; if(oBufLength != 0) { //if the output array isn't empty //duplicating the output array and its size so it can //be overwritten while this write is occuring printf("about to transmit: "); for(i = 0; i < oBufLength; i++) { printf(" %u",oBuf[i]); tempBuf[i] = oBuf[i]; } printf("\n"); bufSize = oBufLength; oBufLength = 0; numBytes = write(BAMid, &tempBuf, bufSize); printf("bytes written = %d\n",numBytes); if (numBytes == -1) { printf("Error writing to port - %s(%d).\n", strerror(errno), errno); } return (numBytes 0); } else { return 0; }

  Read the article

• How to send a reply message to sender machine via serial port using c#

  - by karthik

  I am using the below code to receive the message via serial port which is working fine. Now i need to send back a acknowledgment message to the sender machine. How can send the message ? private void MonitorSP_DataReceived(object sender, SerialDataReceivedEventArgs e) { try { System.IO.Ports.SerialPort SP = (System.IO.Ports.SerialPort)sender; //Get the ports available in system string[] theSerialPortNames = System.IO.Ports.SerialPort.GetPortNames(); string strAvlPortNames = ""; foreach (string s in theSerialPortNames) { strAvlPortNames += s.ToString() + ", "; } //Read an contruct the message Thread.Sleep(1000); string msg = SP.ReadExisting(); string ConstructedMsg = "Port's Found : " + strAvlPortNames + "\n" + "Port Used : " + SP.PortName + "\n" + "Message Received : " + msg; if (InvokeRequired) { richTextBox1.Invoke(new MethodInvoker(delegate { richTextBox1.Text = ConstructedMsg; })); //Send acknowlegement to sender port SP.Write(SP.PortName); return; } } catch (Exception ex) { MessageBox.Show(ex.StackTrace.ToString()); } }

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >