Search Results

Search found 1827 results on 74 pages for 'pci compliance'.

Page 25/74 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • How do I connect to a wireless network?

    - by Keith Groben
    I just installed 10.10 x64 and cannot even find my wireless network let alone connect to it. I've searched all over SE and Ubuntu forums and cannot find out how to do this simple thing. Can some one please give me the answer? It is plugged in right now and is 100% updated. It is a Desktop with wireless card. 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Here's the output: *-network DISABLED description: Wireless interface product: RT2860 vendor: RaLink physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 70:1a:04:f4:de:e9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=2.6.35-27-generic firmware=N/A latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:fcff0000-fcffffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: 00:23:54:fd:c2:32 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.14 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:44 ioport:d800(size=256) memory:fceff000-fcefffff memory:ddffc000-ddffffff memory:fcec0000-fcedffff === Update === I have discovered that this is a know issue with the rt2860. I have been following step by step the instructions found here: http://www.ctbarker.info/2010/05/ubuntu-1004-wireless-chipsets-and-wpa.html I decided to stat over because I was getting stuck on step 5: 'sudo rmmod rt2860sta' is was giving me this problem: 'ERROR: Module rt2860sta does not exist in /proc/modules' Since I started over I cannot even get past step 5 'sudo make' I get this: 'make: * No targets specified and no makefile found. Stop.' I am lost. Any help would be appreciated.

    Read the article

  • radeon display driver clones monitors while using Xinerama

    - by gregmuellegger
    I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

    Read the article

  • Multi-screen and Nvidia GT220

    - by Bohors
    Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

    Read the article

  • ubuntu 11.10 can't find wireless after waking from sleep

    - by Colleen
    I've tried a lot of proposed solutions, most of them adding files to /etc/pm/config.d, as well as WiFi stops working after waking from suspend and nothing has worked. hardware info: [colleen@colleen-HP ~]$ sudo lshw -C network [sudo] password for colleen: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 2c:27:d7:b1:ea:67 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:4000(size=256) memory:c1404000-c1404fff memory:c1400000-c1403fff *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:0d:00.0 logical name: wlan0 version: 00 serial: 8c:a9:82:99:48:8c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-21-generic-pae firmware=39.31.5.1 build 35138 ip=192.168.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:c5500000-c5501fff Is anyone else still having this problem? The two solutions I haven't tried are installing wicd and upgrading because I've heard both are kind of unstable/buggy and wicd frankly scares me.

    Read the article

  • Unable to enable wireless in ubuntu 12.04

    - by Joe
    I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes

    Read the article

  • Lenovo v570 ubuntu 12.04 wireless hard blocked even when ext. switch is on

    - by user100987
    When I run iwconfig it say's lo and eth0 have no wireless extensions, but wlan0 it says IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS the:off Fragment the:off Power Management:off and I believe that's my problem, I just don't know how to turn it back on Any help? When I ran lspci | grep Network it gave me this 02:00.0 Network controller: Intell Corporation Centrino Wireless -N + WiMAX 6150 (rev 67) How I know that my wireless is hard blocked because when I run sudo rfkill list all I get 0: Ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes when I run lshw -c network I get. *-network DISABLED description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: mon1 version: 67 serial: 40:25:c2:d2:96:2c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-32-generic-pae firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:43 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: f0:de:f1:d7:a0:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.65 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff

    Read the article

  • Drive reporting incorrect free space

    - by Oli
    So I swapped my shiny SATA SSD for an even shinier PCI-E SSD. I run my core OS on the SSD because it's silly-fast. I did this on my old SSD so I created a new EXT4 partition and then just dded the data across (sorry I don't know the exact command I ran anymore) and after reinstalling grub, I booted onto the PCI-E SSD. At first glance everything had worked perfectly and things were running faster than ever. But then I noticed the free disk space on the new, larger drive: it was almost exactly the same as it was on the other disk... A disk that was half its size. So it looks as if I've copied the files across incorrectly and it's copied some of the filesystem metadata along with it. Tools like du and Disk Usage Analyzer come back with the correct figures. Things that look at the partition (and not the files) seem to think the drive is 120GB I've been using this drive for a week now so it's way out of sync with the old SSD so dumping the data and starting again isn't a job that fills me with joy but two questions: Is there a way to fix my filesystem so it knows what it's really on about? fsck e2fsck and badblocks all seem to be able to scan it without finding a problem with it. If I do plug my old SSD back in, copy the data off my PCI-E on to it and then copy it back onto a fresh filesystem (eg juggle the data around), what's the best way of doing that? I obviously want to keep all the permissions and softlinks where they are.

    Read the article

  • After upgrade to 12.04 wireless keeps dropping on BCM4312

    - by Sheket
    I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • No WIFI on Ubuntu 12.04 LTS after today software update

    - by Adchara
    I just got new dell inspiron3537 with Ubuntu 12.04 LTS (no windows O/S). It got some wireless (hard block) yesterday. So, this morning, I ran the software update all the security update. After that I can't see "Wireless" in system setting. So, I updated all the software update and looked thru several web site and found "sudo lshw -c network" command. I tried and found the result below. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: 74:86:7a:40:5d:48 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.10 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:60 ioport:4000(size=256) memory:c0700000-c0700fff memory:c0400000-c0403fff *-network UNCLAIMED description: Network controller product: QCA9565 / AR9565 Wireless Network Adapter vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:c0600000-c067ffff memory:9fb00000-9fb0ffff Please suggest what I should do to fix it. Thx in advance

    Read the article

  • Toorcon14

    - by danx
    Toorcon 2012 Information Security Conference San Diego, CA, http://www.toorcon.org/ Dan Anderson, October 2012 It's almost Halloween, and we all know what that means—yes, of course, it's time for another Toorcon Conference! Toorcon is an annual conference for people interested in computer security. This includes the whole range of hackers, computer hobbyists, professionals, security consultants, press, law enforcement, prosecutors, FBI, etc. We're at Toorcon 14—see earlier blogs for some of the previous Toorcon's I've attended (back to 2003). This year's "con" was held at the Westin on Broadway in downtown San Diego, California. The following are not necessarily my views—I'm just the messenger—although I could have misquoted or misparaphrased the speakers. Also, I only reviewed some of the talks, below, which I attended and interested me. MalAndroid—the Crux of Android Infections, Aditya K. Sood Programming Weird Machines with ELF Metadata, Rebecca "bx" Shapiro Privacy at the Handset: New FCC Rules?, Valkyrie Hacking Measured Boot and UEFI, Dan Griffin You Can't Buy Security: Building the Open Source InfoSec Program, Boris Sverdlik What Journalists Want: The Investigative Reporters' Perspective on Hacking, Dave Maas & Jason Leopold Accessibility and Security, Anna Shubina Stop Patching, for Stronger PCI Compliance, Adam Brand McAfee Secure & Trustmarks — a Hacker's Best Friend, Jay James & Shane MacDougall MalAndroid—the Crux of Android Infections Aditya K. Sood, IOActive, Michigan State PhD candidate Aditya talked about Android smartphone malware. There's a lot of old Android software out there—over 50% Gingerbread (2.3.x)—and most have unpatched vulnerabilities. Of 9 Android vulnerabilities, 8 have known exploits (such as the old Gingerbread Global Object Table exploit). Android protection includes sandboxing, security scanner, app permissions, and screened Android app market. The Android permission checker has fine-grain resource control, policy enforcement. Android static analysis also includes a static analysis app checker (bouncer), and a vulnerablity checker. What security problems does Android have? User-centric security, which depends on the user to grant permission and make smart decisions. But users don't care or think about malware (the're not aware, not paranoid). All they want is functionality, extensibility, mobility Android had no "proper" encryption before Android 3.0 No built-in protection against social engineering and web tricks Alternative Android app markets are unsafe. Simply visiting some markets can infect Android Aditya classified Android Malware types as: Type A—Apps. These interact with the Android app framework. For example, a fake Netflix app. Or Android Gold Dream (game), which uploads user files stealthy manner to a remote location. Type K—Kernel. Exploits underlying Linux libraries or kernel Type H—Hybrid. These use multiple layers (app framework, libraries, kernel). These are most commonly used by Android botnets, which are popular with Chinese botnet authors What are the threats from Android malware? These incude leak info (contacts), banking fraud, corporate network attacks, malware advertising, malware "Hackivism" (the promotion of social causes. For example, promiting specific leaders of the Tunisian or Iranian revolutions. Android malware is frequently "masquerated". That is, repackaged inside a legit app with malware. To avoid detection, the hidden malware is not unwrapped until runtime. The malware payload can be hidden in, for example, PNG files. Less common are Android bootkits—there's not many around. What they do is hijack the Android init framework—alteering system programs and daemons, then deletes itself. For example, the DKF Bootkit (China). Android App Problems: no code signing! all self-signed native code execution permission sandbox — all or none alternate market places no robust Android malware detection at network level delayed patch process Programming Weird Machines with ELF Metadata Rebecca "bx" Shapiro, Dartmouth College, NH https://github.com/bx/elf-bf-tools @bxsays on twitter Definitions. "ELF" is an executable file format used in linking and loading executables (on UNIX/Linux-class machines). "Weird machine" uses undocumented computation sources (I think of them as unintended virtual machines). Some examples of "weird machines" are those that: return to weird location, does SQL injection, corrupts the heap. Bx then talked about using ELF metadata as (an uintended) "weird machine". Some ELF background: A compiler takes source code and generates a ELF object file (hello.o). A static linker makes an ELF executable from the object file. A runtime linker and loader takes ELF executable and loads and relocates it in memory. The ELF file has symbols to relocate functions and variables. ELF has two relocation tables—one at link time and another one at loading time: .rela.dyn (link time) and .dynsym (dynamic table). GOT: Global Offset Table of addresses for dynamically-linked functions. PLT: Procedure Linkage Tables—works with GOT. The memory layout of a process (not the ELF file) is, in order: program (+ heap), dynamic libraries, libc, ld.so, stack (which includes the dynamic table loaded into memory) For ELF, the "weird machine" is found and exploited in the loader. ELF can be crafted for executing viruses, by tricking runtime into executing interpreted "code" in the ELF symbol table. One can inject parasitic "code" without modifying the actual ELF code portions. Think of the ELF symbol table as an "assembly language" interpreter. It has these elements: instructions: Add, move, jump if not 0 (jnz) Think of symbol table entries as "registers" symbol table value is "contents" immediate values are constants direct values are addresses (e.g., 0xdeadbeef) move instruction: is a relocation table entry add instruction: relocation table "addend" entry jnz instruction: takes multiple relocation table entries The ELF weird machine exploits the loader by relocating relocation table entries. The loader will go on forever until told to stop. It stores state on stack at "end" and uses IFUNC table entries (containing function pointer address). The ELF weird machine, called "Brainfu*k" (BF) has: 8 instructions: pointer inc, dec, inc indirect, dec indirect, jump forward, jump backward, print. Three registers - 3 registers Bx showed example BF source code that implemented a Turing machine printing "hello, world". More interesting was the next demo, where bx modified ping. Ping runs suid as root, but quickly drops privilege. BF modified the loader to disable the library function call dropping privilege, so it remained as root. Then BF modified the ping -t argument to execute the -t filename as root. It's best to show what this modified ping does with an example: $ whoami bx $ ping localhost -t backdoor.sh # executes backdoor $ whoami root $ The modified code increased from 285948 bytes to 290209 bytes. A BF tool compiles "executable" by modifying the symbol table in an existing ELF executable. The tool modifies .dynsym and .rela.dyn table, but not code or data. Privacy at the Handset: New FCC Rules? "Valkyrie" (Christie Dudley, Santa Clara Law JD candidate) Valkyrie talked about mobile handset privacy. Some background: Senator Franken (also a comedian) became alarmed about CarrierIQ, where the carriers track their customers. Franken asked the FCC to find out what obligations carriers think they have to protect privacy. The carriers' response was that they are doing just fine with self-regulation—no worries! Carriers need to collect data, such as missed calls, to maintain network quality. But carriers also sell data for marketing. Verizon sells customer data and enables this with a narrow privacy policy (only 1 month to opt out, with difficulties). The data sold is not individually identifiable and is aggregated. But Verizon recommends, as an aggregation workaround to "recollate" data to other databases to identify customers indirectly. The FCC has regulated telephone privacy since 1934 and mobile network privacy since 2007. Also, the carriers say mobile phone privacy is a FTC responsibility (not FCC). FTC is trying to improve mobile app privacy, but FTC has no authority over carrier / customer relationships. As a side note, Apple iPhones are unique as carriers have extra control over iPhones they don't have with other smartphones. As a result iPhones may be more regulated. Who are the consumer advocates? Everyone knows EFF, but EPIC (Electrnic Privacy Info Center), although more obsecure, is more relevant. What to do? Carriers must be accountable. Opt-in and opt-out at any time. Carriers need incentive to grant users control for those who want it, by holding them liable and responsible for breeches on their clock. Location information should be added current CPNI privacy protection, and require "Pen/trap" judicial order to obtain (and would still be a lower standard than 4th Amendment). Politics are on a pro-privacy swing now, with many senators and the Whitehouse. There will probably be new regulation soon, and enforcement will be a problem, but consumers will still have some benefit. Hacking Measured Boot and UEFI Dan Griffin, JWSecure, Inc., Seattle, @JWSdan Dan talked about hacking measured UEFI boot. First some terms: UEFI is a boot technology that is replacing BIOS (has whitelisting and blacklisting). UEFI protects devices against rootkits. TPM - hardware security device to store hashs and hardware-protected keys "secure boot" can control at firmware level what boot images can boot "measured boot" OS feature that tracks hashes (from BIOS, boot loader, krnel, early drivers). "remote attestation" allows remote validation and control based on policy on a remote attestation server. Microsoft pushing TPM (Windows 8 required), but Google is not. Intel TianoCore is the only open source for UEFI. Dan has Measured Boot Tool at http://mbt.codeplex.com/ with a demo where you can also view TPM data. TPM support already on enterprise-class machines. UEFI Weaknesses. UEFI toolkits are evolving rapidly, but UEFI has weaknesses: assume user is an ally trust TPM implicitly, and attached to computer hibernate file is unprotected (disk encryption protects against this) protection migrating from hardware to firmware delays in patching and whitelist updates will UEFI really be adopted by the mainstream (smartphone hardware support, bank support, apathetic consumer support) You Can't Buy Security: Building the Open Source InfoSec Program Boris Sverdlik, ISDPodcast.com co-host Boris talked about problems typical with current security audits. "IT Security" is an oxymoron—IT exists to enable buiness, uptime, utilization, reporting, but don't care about security—IT has conflict of interest. There's no Magic Bullet ("blinky box"), no one-size-fits-all solution (e.g., Intrusion Detection Systems (IDSs)). Regulations don't make you secure. The cloud is not secure (because of shared data and admin access). Defense and pen testing is not sexy. Auditors are not solution (security not a checklist)—what's needed is experience and adaptability—need soft skills. Step 1: First thing is to Google and learn the company end-to-end before you start. Get to know the management team (not IT team), meet as many people as you can. Don't use arbitrary values such as CISSP scores. Quantitive risk assessment is a myth (e.g. AV*EF-SLE). Learn different Business Units, legal/regulatory obligations, learn the business and where the money is made, verify company is protected from script kiddies (easy), learn sensitive information (IP, internal use only), and start with low-hanging fruit (customer service reps and social engineering). Step 2: Policies. Keep policies short and relevant. Generic SANS "security" boilerplate policies don't make sense and are not followed. Focus on acceptable use, data usage, communications, physical security. Step 3: Implementation: keep it simple stupid. Open source, although useful, is not free (implementation cost). Access controls with authentication & authorization for local and remote access. MS Windows has it, otherwise use OpenLDAP, OpenIAM, etc. Application security Everyone tries to reinvent the wheel—use existing static analysis tools. Review high-risk apps and major revisions. Don't run different risk level apps on same system. Assume host/client compromised and use app-level security control. Network security VLAN != segregated because there's too many workarounds. Use explicit firwall rules, active and passive network monitoring (snort is free), disallow end user access to production environment, have a proxy instead of direct Internet access. Also, SSL certificates are not good two-factor auth and SSL does not mean "safe." Operational Controls Have change, patch, asset, & vulnerability management (OSSI is free). For change management, always review code before pushing to production For logging, have centralized security logging for business-critical systems, separate security logging from administrative/IT logging, and lock down log (as it has everything). Monitor with OSSIM (open source). Use intrusion detection, but not just to fulfill a checkbox: build rules from a whitelist perspective (snort). OSSEC has 95% of what you need. Vulnerability management is a QA function when done right: OpenVas and Seccubus are free. Security awareness The reality is users will always click everything. Build real awareness, not compliance driven checkbox, and have it integrated into the culture. Pen test by crowd sourcing—test with logging COSSP http://www.cossp.org/ - Comprehensive Open Source Security Project What Journalists Want: The Investigative Reporters' Perspective on Hacking Dave Maas, San Diego CityBeat Jason Leopold, Truthout.org The difference between hackers and investigative journalists: For hackers, the motivation varies, but method is same, technological specialties. For investigative journalists, it's about one thing—The Story, and they need broad info-gathering skills. J-School in 60 Seconds: Generic formula: Person or issue of pubic interest, new info, or angle. Generic criteria: proximity, prominence, timeliness, human interest, oddity, or consequence. Media awareness of hackers and trends: journalists becoming extremely aware of hackers with congressional debates (privacy, data breaches), demand for data-mining Journalists, use of coding and web development for Journalists, and Journalists busted for hacking (Murdock). Info gathering by investigative journalists include Public records laws. Federal Freedom of Information Act (FOIA) is good, but slow. California Public Records Act is a lot stronger. FOIA takes forever because of foot-dragging—it helps to be specific. Often need to sue (especially FBI). CPRA is faster, and requests can be vague. Dumps and leaks (a la Wikileaks) Journalists want: leads, protecting ourselves, our sources, and adapting tools for news gathering (Google hacking). Anonomity is important to whistleblowers. They want no digital footprint left behind (e.g., email, web log). They don't trust encryption, want to feel safe and secure. Whistleblower laws are very weak—there's no upside for whistleblowers—they have to be very passionate to do it. Accessibility and Security or: How I Learned to Stop Worrying and Love the Halting Problem Anna Shubina, Dartmouth College Anna talked about how accessibility and security are related. Accessibility of digital content (not real world accessibility). mostly refers to blind users and screenreaders, for our purpose. Accessibility is about parsing documents, as are many security issues. "Rich" executable content causes accessibility to fail, and often causes security to fail. For example MS Word has executable format—it's not a document exchange format—more dangerous than PDF or HTML. Accessibility is often the first and maybe only sanity check with parsing. They have no choice because someone may want to read what you write. Google, for example, is very particular about web browser you use and are bad at supporting other browsers. Uses JavaScript instead of links, often requiring mouseover to display content. PDF is a security nightmare. Executible format, embedded flash, JavaScript, etc. 15 million lines of code. Google Chrome doesn't handle PDF correctly, causing several security bugs. PDF has an accessibility checker and PDF tagging, to help with accessibility. But no PDF checker checks for incorrect tags, untagged content, or validates lists or tables. None check executable content at all. The "Halting Problem" is: can one decide whether a program will ever stop? The answer, in general, is no (Rice's theorem). The same holds true for accessibility checkers. Language-theoretic Security says complicated data formats are hard to parse and cannot be solved due to the Halting Problem. W3C Web Accessibility Guidelines: "Perceivable, Operable, Understandable, Robust" Not much help though, except for "Robust", but here's some gems: * all information should be parsable (paraphrasing) * if not parsable, cannot be converted to alternate formats * maximize compatibility in new document formats Executible webpages are bad for security and accessibility. They say it's for a better web experience. But is it necessary to stuff web pages with JavaScript for a better experience? A good example is The Drudge Report—it has hand-written HTML with no JavaScript, yet drives a lot of web traffic due to good content. A bad example is Google News—hidden scrollbars, guessing user input. Solutions: Accessibility and security problems come from same source Expose "better user experience" myth Keep your corner of Internet parsable Remember "Halting Problem"—recognize false solutions (checking and verifying tools) Stop Patching, for Stronger PCI Compliance Adam Brand, protiviti @adamrbrand, http://www.picfun.com/ Adam talked about PCI compliance for retail sales. Take an example: for PCI compliance, 50% of Brian's time (a IT guy), 960 hours/year was spent patching POSs in 850 restaurants. Often applying some patches make no sense (like fixing a browser vulnerability on a server). "Scanner worship" is overuse of vulnerability scanners—it gives a warm and fuzzy and it's simple (red or green results—fix reds). Scanners give a false sense of security. In reality, breeches from missing patches are uncommon—more common problems are: default passwords, cleartext authentication, misconfiguration (firewall ports open). Patching Myths: Myth 1: install within 30 days of patch release (but PCI §6.1 allows a "risk-based approach" instead). Myth 2: vendor decides what's critical (also PCI §6.1). But §6.2 requires user ranking of vulnerabilities instead. Myth 3: scan and rescan until it passes. But PCI §11.2.1b says this applies only to high-risk vulnerabilities. Adam says good recommendations come from NIST 800-40. Instead use sane patching and focus on what's really important. From NIST 800-40: Proactive: Use a proactive vulnerability management process: use change control, configuration management, monitor file integrity. Monitor: start with NVD and other vulnerability alerts, not scanner results. Evaluate: public-facing system? workstation? internal server? (risk rank) Decide:on action and timeline Test: pre-test patches (stability, functionality, rollback) for change control Install: notify, change control, tickets McAfee Secure & Trustmarks — a Hacker's Best Friend Jay James, Shane MacDougall, Tactical Intelligence Inc., Canada "McAfee Secure Trustmark" is a website seal marketed by McAfee. A website gets this badge if they pass their remote scanning. The problem is a removal of trustmarks act as flags that you're vulnerable. Easy to view status change by viewing McAfee list on website or on Google. "Secure TrustGuard" is similar to McAfee. Jay and Shane wrote Perl scripts to gather sites from McAfee and search engines. If their certification image changes to a 1x1 pixel image, then they are longer certified. Their scripts take deltas of scans to see what changed daily. The bottom line is change in TrustGuard status is a flag for hackers to attack your site. Entire idea of seals is silly—you're raising a flag saying if you're vulnerable.

    Read the article

  • Unity 3d support for multiple X-screens

    - by stewbond
    I've installed Ubuntu 12.04 this weekend and have had problems getting Unity3d to work with my triple monitor set-up. I've installed the latest nVidia drivers for my 2 nVidia video cards and have used NVIDIA X Server Settings to configure everything. If I stick each monitor on a separate X screen, all but the primary X screen will appear white and the cursor will be a black X. I can start a terminal on this screen but cannot drag other windows to it. If I kill the "Nautilus" process, the white background disappears and I see my desktop background, but my cursor is still an X and I still cannot drag windows to it. If I enable TwinView, I can get one screen on two monitors to work properly, but the white screen remains on my third monitor. In addition, I don't like using TwinView because my full-screen applications get stretched. My current solution is to "Enable Xinerama", use all separate X screens and revert to Unity2d. I'd love a solution to this as Ubuntu 12.10 is not planned to support Unity-2d and prefer the aesthetics of 3d anyways. I can provide Xorg.conf for all configurations and any other suggested diagnostic information. Below is my closest-to-working xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" RightOf "Screen2" Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9500 GT" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 2 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: 1280x1024_75 +0+0; DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" Monitor "Monitor3" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Other people have had similar issues. I haven't been successful at any of the few suggestions submitted. Can not get Dual Monitors to work on Different GPUs http://askubuntu.com/questions/30412/3-monitors-with-2-video-cards-not-working?rq=1 How to get second display to work alongside primary display? http://askubuntu.com/questions/148007/multiple-monitors-only-work-with-unity-2d/201086#201086 xorg.conf and Unity3D?

    Read the article

  • Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

    - by Mark
    I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

    Read the article

  • EXC_BAD_ACCESS and KERN_INVALID_ADDRESS after intiating a print sequence.

    - by Edward M. Bergmann
    MAC G4/1.5GHz/2GB/1TB+ OS10.4.11 Start up Volume has been erased/complete reinstall with updated software. Current problem only occurs when printing to an Epson Artisan 800 [USB as well as Ethernet connected] when using Macromedia FreeHand 10.0.1.67. All other apps/printers work fine. Memory has been removed/swapped/reinstalled several times, CPU was changed from 1.5GB to 1.3GB. Page(s) will print, but application quits within a second or two after selecting "print." Apple has never replied, Epson hasn't a clue, and I am befuddled!! Perhaps there is GURU out their who and see a bigger-better picture and understands how to interpret all of this stuff. If so, it would be a terrific pleasure to get a handle on how to cure this problem or get some A M M U N I T I O N to fire in the right direction. I thank you in advance. FreeHand 10 MAC OS10.4.11 unexpectedly quits after invoking a print command, the result: Date/Time: 2010-04-20 14:23:18.371 -0700 OS Version: 10.4.11 (Build 8S165) Report Version: 4 Command: FreeHand 10 Path: /Applications/Macromedia FreeHand 10.0.1.67/FreeHand 10 Parent: WindowServer [1060] Version: 10.0.1.67 (10.0.1.67, Copyright © 1988-2002 Macromedia Inc. and its licensors. All rights reserved.) PID: 1217 Thread: 0 Exception: EXC_BAD_ACCESS (0x0001) Codes: KERN_INVALID_ADDRESS (0x0001) at 0x07d7e000 Thread 0 Crashed: 0 <<00000000>> 0xffff8a60 __memcpy + 704 (cpu_capabilities.h:189) 1 FreeHand X 0x011d2994 0x1008000 + 1878420 2 FreeHand X 0x01081da4 0x1008000 + 499108 3 FreeHand X 0x010f5474 0x1008000 + 971892 4 FreeHand X 0x010d0278 0x1008000 + 819832 5 FreeHand X 0x010fa808 0x1008000 + 993288 6 FreeHand X 0x01113608 0x1008000 + 1095176 7 FreeHand X 0x01113748 0x1008000 + 1095496 8 FreeHand X 0x01099ebc 0x1008000 + 597692 9 FreeHand X 0x010fa358 0x1008000 + 992088 10 FreeHand X 0x010fa170 0x1008000 + 991600 11 FreeHand X 0x010f9830 0x1008000 + 989232 12 FreeHand X 0x01098678 0x1008000 + 591480 13 FreeHand X 0x010f7a5c 0x1008000 + 981596 Thread 1: 0 libSystem.B.dylib 0x90005dec syscall + 12 1 com.apple.OpenTransport 0x9ad015a0 BSD_waitevent + 44 2 com.apple.OpenTransport 0x9ad06360 CarbonSelectThreadFunc + 176 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 2: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad01e94 CarbonOperationThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 3: 0 libSystem.B.dylib 0x9002bfc8 semaphore_wait_signal_trap + 8 1 libSystem.B.dylib 0x90030aac pthread_cond_wait + 480 2 com.apple.OpenTransport 0x9ad11df0 CarbonInetOperThreadFunc + 80 3 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 4: 0 libSystem.B.dylib 0x90053f88 semaphore_timedwait_signal_trap + 8 1 libSystem.B.dylib 0x900707e8 pthread_cond_timedwait_relative_np + 556 2 ...ple.CoreServices.CarbonCore 0x90bf9330 TSWaitOnSemaphoreCommon + 176 3 ...ple.CoreServices.CarbonCore 0x90c012d0 TimerThread + 60 4 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 5: 0 libSystem.B.dylib 0x9001f48c select + 12 1 com.apple.CoreFoundation 0x907f1240 __CFSocketManager + 472 2 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 6: 0 libSystem.B.dylib 0x9002188c access + 12 1 ...e.print.framework.PrintCore 0x9169a620 CreateProxyURL(__CFURL const*) + 192 2 ...e.print.framework.PrintCore 0x9169a4f8 CreateOriginalPrinterProxyURL() + 80 3 ...e.print.framework.PrintCore 0x9169a034 CheckPrinterProxyVersion(OpaquePMPrinter*, __CFURL const*) + 192 4 ...e.print.framework.PrintCore 0x91699d94 PJCPrinterProxyCreateURL + 932 5 ...e.print.framework.PrintCore 0x916997bc PJCLaunchPrinterProxy(OpaquePMPrinter*, PMLaunchPCReason) + 32 6 ...e.print.framework.PrintCore 0x91699730 PJCLaunchPrinterProxyThread(void*) + 136 7 libSystem.B.dylib 0x9002b908 _pthread_body + 96 Thread 0 crashed with PPC Thread State 64: srr0: 0x00000000ffff8a60 srr1: 0x000000000200f030 vrsave: 0x00000000ff000000 cr: 0x24002244 xer: 0x0000000020000002 lr: 0x00000000011d2994 ctr: 0x00000000000003f6 r0: 0x0000000000000000 r1: 0x00000000bfffea60 r2: 0x0000000000000000 r3: 0x00000000083bb000 r4: 0x00000000083c0040 r5: 0x0000000000014d84 r6: 0x0000000000000010 r7: 0x0000000000000020 r8: 0x0000000000000030 r9: 0x0000000000000000 r10: 0x0000000000000060 r11: 0x0000000000000080 r12: 0x0000000007d7e000 r13: 0x0000000000000000 r14: 0x00000000005cbd26 r15: 0x0000000000000001 r16: 0x00000000017b03a0 r17: 0x0000000000000000 r18: 0x000000000068fa80 r19: 0x0000000000000001 r20: 0x0000000006c639c4 r21: 0x00000000006900f8 r22: 0x0000000006e09480 r23: 0x0000000006e0a250 r24: 0x0000000000000002 r25: 0x0000000000000000 r26: 0x00000000bfffed2c r27: 0x0000000006e05ce0 r28: 0x0000000000014d84 r29: 0x0000000000000000 r30: 0x0000000000014d84 r31: 0x00000000083bb000 Binary Images Description: 0x1000 - 0x2fff LaunchCFMApp /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp 0x27f000 - 0x2ce3c7 CarbonLibpwpc PEF binary: CarbonLibpwpc 0x2ce3d0 - 0x2e66bd Apple;Carbon;Multimedia PEF binary: Apple;Carbon;Multimedia 0x2e7c00 - 0x2e998b Apple;Carbon;Networking PEF binary: Apple;Carbon;Networking 0x31ab10 - 0x31abb3 CFMPriv_QuickTime PEF binary: CFMPriv_QuickTime 0x31ac20 - 0x31ac97 CFMPriv_System PEF binary: CFMPriv_System 0x31af30 - 0x31b000 CFMPriv_CarbonSound PEF binary: CFMPriv_CarbonSound 0x31b080 - 0x31b153 CFMPriv_CommonPanels PEF binary: CFMPriv_CommonPanels 0x31b230 - 0x31b2eb CFMPriv_Help PEF binary: CFMPriv_Help 0x31b2f0 - 0x31b3ba CFMPriv_HIToolbox PEF binary: CFMPriv_HIToolbox 0x31b440 - 0x31b516 CFMPriv_HTMLRendering PEF binary: CFMPriv_HTMLRendering 0x31b550 - 0x31b602 CFMPriv_CoreFoundation PEF binary: CFMPriv_CoreFoundation 0x31b7f0 - 0x31b8a5 CFMPriv_DVComponentGlue PEF binary: CFMPriv_DVComponentGlue 0x31f760 - 0x31f833 CFMPriv_ImageCapture PEF binary: CFMPriv_ImageCapture 0x31f8c0 - 0x31f9a5 CFMPriv_NavigationServices PEF binary: CFMPriv_NavigationServices 0x31fa20 - 0x31faf6 CFMPriv_OpenScripting?MacBLib PEF binary: CFMPriv_OpenScripting?MacBLib 0x31fbd0 - 0x31fc8e CFMPriv_Print PEF binary: CFMPriv_Print 0x31fcb0 - 0x31fd7d CFMPriv_SecurityHI PEF binary: CFMPriv_SecurityHI 0x31fe00 - 0x31fee2 CFMPriv_SpeechRecognition PEF binary: CFMPriv_SpeechRecognition 0x31ff60 - 0x320033 CFMPriv_CarbonCore PEF binary: CFMPriv_CarbonCore 0x3200b0 - 0x320183 CFMPriv_OSServices PEF binary: CFMPriv_OSServices 0x320260 - 0x320322 CFMPriv_AE PEF binary: CFMPriv_AE 0x320330 - 0x3203f5 CFMPriv_ATS PEF binary: CFMPriv_ATS 0x320470 - 0x320547 CFMPriv_ColorSync PEF binary: CFMPriv_ColorSync 0x3205d0 - 0x3206b3 CFMPriv_FindByContent PEF binary: CFMPriv_FindByContent 0x320730 - 0x32080a CFMPriv_HIServices PEF binary: CFMPriv_HIServices 0x320880 - 0x320960 CFMPriv_LangAnalysis PEF binary: CFMPriv_LangAnalysis 0x3209f0 - 0x320ad6 CFMPriv_LaunchServices PEF binary: CFMPriv_LaunchServices 0x320bb0 - 0x320c87 CFMPriv_PrintCore PEF binary: CFMPriv_PrintCore 0x320c90 - 0x320d52 CFMPriv_QD PEF binary: CFMPriv_QD 0x320e50 - 0x320f39 CFMPriv_SpeechSynthesis PEF binary: CFMPriv_SpeechSynthesis 0x405000 - 0x497f7a PowerPlant Shared Library PEF binary: PowerPlant Shared Library 0x498000 - 0x4f0012 Player PEF binary: Player 0x4f1000 - 0x54a4c0 KodakCMSC PEF binary: KodakCMSC 0x6bd000 - 0x6eca10 <Unknown disk fragment> PEF binary: <Unknown disk fragment> 0x7fc000 - 0x7fdb8b xRes Palette Importc PEF binary: xRes Palette Importc 0x1008000 - 0x17770a5 FreeHand X PEF binary: FreeHand X 0x17770b0 - 0x17a6fe7 MW_MSL.Carbon.Shlb PEF binary: MW_MSL.Carbon.Shlb 0x17fb000 - 0x17fff03 Smudge PEF binary: Smudge 0x5ce6000 - 0x5cecebe PICT Import Export68 PEF binary: PICT Import Export68 0x5ced000 - 0x5d24267 PNG Import Exportr68 PEF binary: PNG Import Exportr68 0x5d25000 - 0x5d30dde Release To Layerswpc PEF binary: Release To Layerswpc 0x5d31000 - 0x5d37fd2 Roughen PEF binary: Roughen 0x5d38000 - 0x5d459ae Shadow PEF binary: Shadow 0x5d46000 - 0x5d4b0de Spiral PEF binary: Spiral 0x5d4c000 - 0x5d57f07 Targa Import Export8 PEF binary: Targa Import Export8 0x5d58000 - 0x5d8d959 TIFF Import Export68 PEF binary: TIFF Import Export68 0x5d93000 - 0x5da0f65 Color Utilities PEF binary: Color Utilities 0x5f62000 - 0x5f6e795 Mirror PEF binary: Mirror 0x5f6f000 - 0x5fbd656 HTML Export PEF binary: HTML Export 0x5fc8000 - 0x5fd442f Graphic Hose PEF binary: Graphic Hose 0x5fd5000 - 0x5fe4b5a BMP Import Exportr68 PEF binary: BMP Import Exportr68 0x5fe5000 - 0x60342d6 PDF Export PEF binary: PDF Export 0x6041000 - 0x6042f44 Fractalizej@ PEF binary: Fractalizej@ 0x6043000 - 0x6075214 Chart Tool™ PEF binary: Chart Tool™ 0x6076000 - 0x607d46d Bend PEF binary: Bend 0x607e000 - 0x60cda7b PDF Import PEF binary: PDF Import 0x60dc000 - 0x60e38f2 Photoshop ImportChartCursor PEF binary: Photoshop ImportChartCursor 0x60e4000 - 0x60eb9b1 3D Rotationp PEF binary: 3D Rotationp 0x60ec000 - 0x611b458 JPEG Import ExportANEL PEF binary: JPEG Import ExportANEL 0x611c000 - 0x613d89f GIF Import Export PEF binary: GIF Import Export 0x613e000 - 0x616d7f7 Flash Export PEF binary: Flash Export 0x616e000 - 0x6175d75 Fisheye Lens PEF binary: Fisheye Lens 0x6176000 - 0x6182343 IPTC File Info PEF binary: IPTC File Info 0x6184000 - 0x6193790 PEF binary: 0x6194000 - 0x61965e5 Photoshop Palette Import PEF binary: Photoshop Palette Import 0x6197000 - 0x619c5a4 Add PointsZ PEF binary: Add PointsZ 0x619d000 - 0x61ad92b Emboss PEF binary: Emboss 0x61ae000 - 0x61be6e1 AppleScript™ Xtrawpc PEF binary: AppleScript™ Xtrawpc 0x61bf000 - 0x61d16de Navigation PEF binary: Navigation 0x61d2000 - 0x61ff94e CorelDRAW 7-8 Import PEF binary: CorelDRAW 7-8 Import 0x620a000 - 0x620d7f1 Trap PEF binary: Trap 0x620e000 - 0x62149d4 Import RGB Color Table PEF binary: Import RGB Color Table 0x6215000 - 0x6217dfe Arc PEF binary: Arc 0x6218000 - 0x62211e3 Delete Empty Text Blocks PEF binary: Delete Empty Text Blocks 0x6222000 - 0x624c8da MIX Services PEF binary: MIX Services 0x7d0b000 - 0x7d37fff com.apple.print.framework.Print.Private 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/Current/Plugins/PrintCocoaUI.bundle/Contents/MacOS/PrintCocoaUI 0x7dbf000 - 0x7ddffff com.apple.print.PrintingCocoaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Plugins/PrintingCocoaPDEs.bundle/Contents/MacOS/PrintingCocoaPDEs 0x7f05000 - 0x7f39fff com.epson.ijprinter.pde.PrintSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/PrintSetting.plugin/Contents/MacOS/PrintSetting 0x7f49000 - 0x8044fff com.epson.ijprinter.IJPFoundation 6.54 /Library/Printers/EPSON/InkjetPrinter/Libraries/IJPFoundation.framework/Versions/A/IJPFoundation 0x809a000 - 0x80cdfff com.epson.ijprinter.pde.ColorManagement.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ColorManagement.plugin/Contents/MacOS/ColorManagement 0x80dd000 - 0x8110fff com.epson.ijprinter.pde.ExpandMargin.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExpandMargin.plugin/Contents/MacOS/ExpandMargin 0x8120000 - 0x8153fff com.epson.ijprinter.pde.ExtensionSetting.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/ExtensionSetting.plugin/Contents/MacOS/ExtensionSetting 0x8163000 - 0x8196fff com.epson.ijprinter.pde.DoubleSidePrint.EP0827MSA 6.36 /Library/Printers/EPSON/InkjetPrinter/PrintingModule/EP0827MSA_Core.plugin/Contents/PDEs/DoubleSidePrint.plugin/Contents/MacOS/DoubleSidePrint 0x81a6000 - 0x81bffff com.apple.print.PrintingTiogaPDEs 4.6 (163.10) /System/Library/Frameworks/Carbon.framework/Frameworks/Print.framework/Versions/A/Plugins/PrintingTiogaPDEs.bundle/Contents/MacOS/PrintingTiogaPDEs 0x838f000 - 0x8397fff com.apple.print.converter.plugin 4.5 (163.8) /System/Library/Printers/CVs/Converter.plugin/Contents/MacOS/Converter 0x78e00000 - 0x78e07fff libLW8Utils.dylib /System/Library/Printers/Libraries/libLW8Utils.dylib 0x79200000 - 0x7923ffff libLW8Converter.dylib /System/Library/Printers/Libraries/libLW8Converter.dylib 0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld 0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib 0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib 0x9021b000 - 0x90268fff com.apple.CoreText 1.0.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreText.framework/Versions/A/CoreText 0x90293000 - 0x90344fff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ATS.framework/Versions/A/ATS 0x90373000 - 0x9072efff com.apple.CoreGraphics 1.258.85 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics 0x907bb000 - 0x90895fff com.apple.CoreFoundation 6.4.11 (368.35) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation 0x908de000 - 0x908defff com.apple.CoreServices 10.4 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices 0x908e0000 - 0x909e2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib 0x90a3c000 - 0x90ac0fff libobjc.A.dylib /usr/lib/libobjc.A.dylib 0x90aea000 - 0x90b5cfff IOKit /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit 0x90b72000 - 0x90b84fff libauto.dylib /usr/lib/libauto.dylib 0x90b8b000 - 0x90e62fff com.apple.CoreServices.CarbonCore 681.19 (681.21) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore 0x90ec8000 - 0x90f48fff com.apple.CoreServices.OSServices 4.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServices.framework/Versions/A/OSServices 0x90f92000 - 0x90fd4fff com.apple.CFNetwork 129.24 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwork.framework/Versions/A/CFNetwork 0x90fe9000 - 0x91001fff com.apple.WebServices 1.1.2 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServicesCore.framework/Versions/A/WebServicesCore 0x91011000 - 0x91092fff com.apple.SearchKit 1.0.8 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchKit.framework/Versions/A/SearchKit 0x910d8000 - 0x91101fff com.apple.Metadata 10.4.4 (121.36) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadata.framework/Versions/A/Metadata 0x91112000 - 0x91120fff libz.1.dylib /usr/lib/libz.1.dylib 0x91123000 - 0x912defff com.apple.security 4.6 (29770) /System/Library/Frameworks/Security.framework/Versions/A/Security 0x913dd000 - 0x913e6fff com.apple.DiskArbitration 2.1.2 /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration 0x913ed000 - 0x913f5fff libbsm.dylib /usr/lib/libbsm.dylib 0x913f9000 - 0x91421fff com.apple.SystemConfiguration 1.8.3 /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfiguration 0x91434000 - 0x9143ffff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib 0x91444000 - 0x914bffff com.apple.audio.CoreAudio 3.0.5 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio 0x914fc000 - 0x914fcfff com.apple.ApplicationServices 10.4 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices 0x914fe000 - 0x91536fff com.apple.AE 312.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/AE.framework/Versions/A/AE 0x91551000 - 0x91623fff com.apple.ColorSync 4.4.13 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ColorSync.framework/Versions/A/ColorSync 0x91676000 - 0x91707fff com.apple.print.framework.PrintCore 4.6 (177.13) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/PrintCore.framework/Versions/A/PrintCore 0x9174e000 - 0x91805fff com.apple.QD 3.10.28 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/QD.framework/Versions/A/QD 0x91842000 - 0x918a0fff com.apple.HIServices 1.5.3 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/HIServices.framework/Versions/A/HIServices 0x918cf000 - 0x918f0fff com.apple.LangAnalysis 1.6.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LangAnalysis.framework/Versions/A/LangAnalysis 0x91904000 - 0x91929fff com.apple.FindByContent 1.5 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/FindByContent.framework/Versions/A/FindByContent 0x9193c000 - 0x9197efff com.apple.LaunchServices 183.1 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/LaunchServices 0x9199a000 - 0x919aefff com.apple.speech.synthesis.framework 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/SpeechSynthesis.framework/Versions/A/SpeechSynthesis 0x919bc000 - 0x91a02fff com.apple.ImageIO.framework 1.5.9 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/ImageIO 0x91a19000 - 0x91ae0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib 0x91b2e000 - 0x91b43fff libcups.2.dylib /usr/lib/libcups.2.dylib 0x91b48000 - 0x91b66fff libJPEG.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib 0x91b6c000 - 0x91c23fff libJP2.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib 0x91c72000 - 0x91c76fff libGIF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib 0x91c78000 - 0x91ce2fff libRaw.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRaw.dylib 0x91ce7000 - 0x91d02fff libPng.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libPng.dylib 0x91d07000 - 0x91d0afff libRadiance.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libRadiance.dylib 0x91d0c000 - 0x91deafff libxml2.2.dylib /usr/lib/libxml2.2.dylib 0x91e0a000 - 0x91e48fff libTIFF.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/libTIFF.dylib 0x91e4f000 - 0x91e4ffff com.apple.Accelerate 1.2.2 (Accelerate 1.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate 0x91e51000 - 0x91f36fff com.apple.vImage 2.4 /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.framework/Versions/A/vImage 0x91f3e000 - 0x91f5dfff com.apple.Accelerate.vecLib 3.2.2 (vecLib 3.2.2) /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/vecLib 0x91fc9000 - 0x92037fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvMisc.dylib 0x92042000 - 0x920d7fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libvDSP.dylib 0x920f1000 - 0x92679fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libBLAS.dylib 0x926ac000 - 0x929d7fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Versions/A/libLAPACK.dylib 0x92a07000 - 0x92af5fff libiconv.2.dylib /usr/lib/libiconv.2.dylib 0x92af8000 - 0x92b80fff com.apple.DesktopServices 1.3.7 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/DesktopServicesPriv 0x92bc1000 - 0x92df4fff com.apple.Foundation 6.4.12 (567.42) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 0x92f27000 - 0x92f45fff libGL.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib 0x92f50000 - 0x92faafff libGLU.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib 0x92fc8000 - 0x92fc8fff com.apple.Carbon 10.4 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon 0x92fca000 - 0x92fdefff com.apple.ImageCapture 3.0 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture.framework/Versions/A/ImageCapture 0x92ff6000 - 0x93006fff com.apple.speech.recognition.framework 3.4 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecognition.framework/Versions/A/SpeechRecognition 0x93012000 - 0x93027fff com.apple.securityhi 2.0 (203) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.framework/Versions/A/SecurityHI 0x93039000 - 0x930c0fff com.apple.ink.framework 101.2 (69) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework/Versions/A/Ink 0x930d4000 - 0x930dffff com.apple.help 1.0.3 (32) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framework/Versions/A/Help 0x930e9000 - 0x93117fff com.apple.openscripting 1.2.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting.framework/Versions/A/OpenScripting 0x93131000 - 0x93140fff com.apple.print.framework.Print 5.2 (192.4) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framework/Versions/A/Print 0x9314c000 - 0x931b2fff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering.framework/Versions/A/HTMLRendering 0x931e3000 - 0x93232fff com.apple.NavigationServices 3.4.4 (3.4.3) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationServices.framework/Versions/A/NavigationServices 0x93260000 - 0x9327dfff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.framework/Versions/A/CarbonSound 0x9328f000 - 0x9329cfff com.apple.CommonPanels 1.2.2 (73) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels.framework/Versions/A/CommonPanels 0x932a5000 - 0x935b3fff com.apple.HIToolbox 1.4.10 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.framework/Versions/A/HIToolbox 0x93703000 - 0x9370ffff com.apple.opengl 1.4.7 /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL 0x93714000 - 0x93734fff com.apple.DirectoryService.Framework 3.3 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryService 0x93787000 - 0x93787fff com.apple.Cocoa 6.4 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa 0x93789000 - 0x93dbcfff com.apple.AppKit 6.4.10 (824.48) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit 0x94149000 - 0x941bbfff com.apple.CoreData 91 (92.1) /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData 0x941f4000 - 0x942b9fff com.apple.audio.toolbox.AudioToolbox 1.4.7 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox 0x9430c000 - 0x9430cfff com.apple.audio.units.AudioUnit 1.4 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit 0x9430e000 - 0x944cefff com.apple.QuartzCore 1.4.12 /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore 0x94518000 - 0x94555fff libsqlite3.0.dylib /usr/lib/libsqlite3.0.dylib 0x9455d000 - 0x945adfff libGLImage.dylib /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dylib 0x945b6000 - 0x945cffff com.apple.CoreVideo 1.4.2 /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo 0x9477d000 - 0x9478cfff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib 0x94794000 - 0x947a1fff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib 0x947a7000 - 0x947c6fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib 0x947e7000 - 0x94800fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib 0x94807000 - 0x94b3afff com.apple.QuickTime 7.6.4 (1327.73) /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime 0x94c22000 - 0x94c93fff libstdc++.6.dylib /usr/lib/libstdc++.6.dylib 0x94e09000 - 0x94f39fff com.apple.AddressBook.framework 4.0.6 (490) /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook 0x94fcc000 - 0x94fdbfff com.apple.DSObjCWrappers.Framework 1.1 /System/Library/PrivateFrameworks/DSObjCWrappers.framework/Versions/A/DSObjCWrappers 0x94fe3000 - 0x95010fff com.apple.LDAPFramework 1.4.1 (69.0.1) /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP 0x95017000 - 0x95027fff libsasl2.2.dylib /usr/lib/libsasl2.2.dylib 0x9502b000 - 0x9505afff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib 0x9506a000 - 0x95087fff libresolv.9.dylib /usr/lib/libresolv.9.dylib 0x9acff000 - 0x9ad1dfff com.apple.OpenTransport 2.0 /System/Library/PrivateFrameworks/OpenTransport.framework/OpenTransport 0x9ad98000 - 0x9ad99fff com.apple.iokit.dvcomponentglue 1.7.9 /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue 0x9b1db000 - 0x9b1f2fff libCFilter.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCFilter.A.dylib 0x9c69b000 - 0x9c6bdfff libmx.A.dylib /usr/lib/libmx.A.dylib 0xeab00000 - 0xeab25fff libConverter.dylib /System/Library/Printers/Libraries/libConverter.dylib Model: PowerMac3,1, BootROM 4.2.8f1, 1 processors, PowerPC G4 (3.3), 1.3 GHz, 2 GB Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB Memory Module: DIMM0/J21, 512 MB, SDRAM, PC133-333 Memory Module: DIMM1/J22, 512 MB, SDRAM, PC133-333 Memory Module: DIMM2/J23, 512 MB, SDRAM, PC133-333 Memory Module: DIMM3/J24, 512 MB, SDRAM, PC133-333 Modem: Spring, UCJ, V.90, 3.0F, APPLE VERSION 0001, 4/7/1999 Network Service: Built-in Ethernet, Ethernet, en0 PCI Card: SeriTek/1V2E2 v.5.1.3,11/22/05, 23:47:18, ata, SLOT-B PCI Card: pci-bridge, pci, SLOT-C PCI Card: firewire, ieee1394, 2x8 PCI Card: usb, usb, 2x9 PCI Card: usb, usb, 2x9 PCI Card: pcie55,2928, 2x9 PCI Card: ATTO,ExpressPCIPro, scsi, SLOT-D Parallel ATA Device: MATSHITADVD-ROM SR-8585 Parallel ATA Device: IOMEGA ZIP 100 ATAPI USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMic USB audio system, Griffin Technology, Inc, Up to 12 Mb/sec, 500 mA USB Device: USB Storage Device, Generic, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 MFP, EPSON, Up to 12 Mb/sec, 500 mA USB Device: DYMO LabelWriter Twin Turbo, DYMO, Up to 12 Mb/sec, 500 mA USB Device: USB 2.0 CD + HDD, DMI, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: USB2.0 Hub, Up to 12 Mb/sec, 500 mA USB Device: iMate, USB To ADB Adaptor, Griffin Technology, Inc., Up to 1.5 Mb/sec, 500 mA USB Device: Hub in Apple Pro Keyboard, Alps Electric, Up to 12 Mb/sec, 500 mA USB Device: Griffin PowerMate, Griffin Technology, Inc., Up to 1.5 Mb/sec, 100 mA

    Read the article

  • eth0 and eth1 both assigned same IP on boot

    - by Banjer
    I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: banjer@harp:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

    Read the article

  • WebCenter Customer Spotlight: College of American Pathologists

    - by me
    Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution Summary College of American Pathologists Goes Live with OracleWebCenter - Imaging, AP Invoice Automation, and EBS Managed Attachment with Support for Imaging ContentThe College of American Pathologists (CAP), the leading organization of board-certified pathologists serving more then 18,000 physician members, 7,000 laboratories are accredited by the CAP, and approximately 22,000 laboratories are enrolled in the College’s proficiency testing programs. The business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application. The solution improves customer services turnaround time, provides better compliance and improves maintenance and management of the technology infrastructure. Company OverviewThe College of American Pathologists (CAP), celebrating 50 years as the gold standard in laboratory accreditation, is a medical society serving more than 17,000 physician members and the global laboratory community. It is the world’s largest association composed exclusively of board certified pathologists and is the worldwide leader in laboratory quality assurance. The College advocates accountable, high-quality, and cost-effective patient care. The more than 17,000 pathologist members of the College of American Pathologists represent board-certified pathologists and pathologists in training worldwide. More than 7,000 laboratories are accredited by the CAP, and approximately 23,000 laboratories are enrolled in the College’s proficiency testing programs.  Business ChallengesThe CAP business objective was to content-enable their Oracle E-Business Suite (EBS) enterprise application by combining the best of Imaging and Manage Attachment functionality providing a unique opportunity for the business to have unprecedented access to both structure and unstructured content from within their enterprise application.  Bring more flexibility to systems and programs in order to adapt quickly Get a 360 degree view of the customer Reduce cost of running the business Solution DeployedWith the help of Oracle Consulting, the customer implemented Oracle WebCenter Content as the centralized E-Business Suite Document Repository.  The solution enables to capture, present and manage all unstructured content (PDFs,word processing documents, scanned images, etc.) related to Oracle E-Business Suite transactions and exposing the related content using the familiar EBS User Interface. Business ResultsThe CAP achieved following benefits from the implemented solution: Managed Attachment Solution Align with strategic Oracle Fusion Middleware platform Integrate with the CAP existing data capture capabilities Single user interface provided by the Managed Attachment solution for all content Better compliance and improved collaboration  Account Payables Invoice Processing Imaging Solution Automated invoice management eliminating dependency on paper materials and improving compliance, collaboration and accuracy A single repository to house and secure scanned invoices and all supplemental documents Greater management visibility of invoice entry process Additional Information CAP OpenWorld Presentation Oracle WebCenter Content Oracle Webcenter Capture Oracle WebCenter Imaging Oracle  Consulting

    Read the article

  • Product News: Oracle Unveils a Waste Management Solution for the Oracle E-Business Suite

    - by Evelyn Neumayr
    Oracle recently announced a new product to help organizations reduce the cost and compliance with international hazmat (short for hazardous materials) and recycling and environmental protection laws. This new waste management solution for Oracle E-Business Suite extends the capabilities of  Oracle Depot Repair, Oracle Transportation Management and Oracle Global Trade Management. It automates and monitors waste management processes to help ensure that hazardous materials are tracked and handled in accordance with regulatory requirements. Oracle’s waste management solution for the Oracle E-Business Suite leverages Oracle Transportation Management and Oracle Global Trade Management, enabling customers to view in-transit inventory across the extended supply chain, while also providing a single repository for all legal, regulatory and compliance related information. Read here for more information.

    Read the article

  • Oracle OpenWorld - 3 Days and Counting!

    - by Theresa Hickman
    If you haven’t set your schedule for OpenWorld yet, here’s your chance to reserve a seat at some of the key Financial Management sessions. There’s over 120 sessions specific to our Financials audience that will not only focus on Oracle’s financial product lines, but will also discuss controls and compliance, as well as analytics, budgeting/planning, and financial reporting and the close process. For a complete list of sessions, view any of the Focus on Documents located on the OpenWorld site. Key Sessions: Day Time Session Location Monday 3:15 Oracle Fusion Financials: Overview, Strategy, Customer Experiences, and Roadmap Moscone West - 2003 Monday 3:15 Oracle Financials: Strategy, Update, and Roadmap Moscone West - 3006 Tuesday 11:45 General Session: What’s Next for Financial Management Solutions at Oracle? Moscone West - 3002/3004 Tuesday 1:15 Exploring Oracle Preventive Controls Governor’s Features Through Real-Life Examples Palace Hotel - Presidio Weds 10:15 Oracle Hyperion Enterprise Performance Management: A Bridge to Oracle Fusion Financials Palace Hotel - Concert Weds 1:15 Oracle Fusion Financials Coexistence with Oracle E-Business Suite Moscone West - 2011 Weds 3:30 McDonald’s Adopts Financial Analytics to Increase Business Performance Moscone West - 2011 Thursday 12:45 User Panel: Reducing Upgrade Errors and Effort While Improving Compliance Palace Hotel Palace Hotel - Presidio

    Read the article

  • WebCenter Customer Spotlight: Institute of Financing for Agriculture and Fisheries

    - by kellsey.ruppel
     Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryThe Institute of Financing for Agriculture and Fisheries (IFAP) provides access, process payments, and oversee the application of EU and domestic funds distribution to individuals and companies. IFAP business objectives were to establish electronic processing of EU funds, improve relations between government agencies and public in compliance with the International Organization for Standardization (ISO) requirements for information management and security They implemented a complete solution for managing the entire document content life cycle through the use of Oracle WebCenter Content and Oracle WebCenter Capture. IFAP improved relationships with the public by accelerating payments electronically to individuals and organizations engaged in agriculture and fisheries, which is much easier, faster, and more secure than paper-based payments and the solution complies with ISO information and security requirements.  Company OverviewAs part of the Ministry of Agriculture, Rural Development, and Fisheries, the mission of the Institute of Financing for Agriculture and Fisheries (IFAP) is to provide access, process payments, and oversee the application of European Union (EU) and domestic funds distribution to individuals and companies engaged in the agriculture, rural development, and fisheries industries. Business ChallengesIFAP main business objective was to establish electronic processing of EU funds invested in agriculture and fisheries, improve relations between government agencies and the public and  comply with International Organization for Standardization (ISO) requirements for information management and security systems regarding access to stored documents. Solution DeployedIFAP implemented a complete solution for managing the entire document content life cycle through the use of Oracle WebCenter Content and Oracle WebCenter Capture.  The use of paper was replaced with digital formats, accelerating internal processes and ensuring compliance with ISO requirements Business Results Scalability The number of documents included and managed in the document system, called iDOC, increased to a total of 490,847, of which 103,298 are internally generated, 113,824 are digitized correspondence, and 264,870 are forms that have been digitized or received via the institute’s Web site. Efficiency  IFAP improved relationships with the public by accelerating payments electronically to individuals and organizations engaged in agriculture and fisheries, which is much easier, faster, and more secure than paper-based payments. The overall productivity increased through the use of digital formats and citizens’ ID cards as digital signatures. Compliance The implemented solution complies with International Organization for Standardization (ISO) requirements for information management and security systems regarding access to stored documents. Oracle Products and Services IFAP Customer Snapshot Oracle WebCenter Content Oracle WebCenter Capture Oracle Application Server Oracle Forms Oracle Reports

    Read the article

  • Microphone not capturing sound on 12.04 Lenovo G580

    - by Yam Marcovic
    In both Skype and the Sound Recorder application, I am not capturing any audio from my built-in microphone. I'm not sure why. Otherwise, sound output is working well. I have tried running gstreamer-properties and setting the Default Input plugin to PulseAUdio as well (to match the output), and it didn't help. I have tried running alsamixer -V all and I only get 2 input-related entries: Capture(L R) which is on 100 and not muted (can't be either), and Analog Mic Boost which is on 20db. Extra info: Camera (video) is working well on Skype and Kamerka. Can you please help me get my microphone to work? lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at e0600000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at e0614000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0619000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at e0610000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0500000-e05fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e0400000-e04fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 3977 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at e0618000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at e0617000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) Subsystem: Lenovo Device 3977 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 10 Region 0: Memory at e0615000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c-i801 01:00.0 Ethernet controller: Atheros Communications Inc. AR8162 Fast Ethernet (rev 08) Subsystem: Lenovo Device 3979 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 2000 [size=128] Capabilities: <access denied> 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Lenovo Device 31a1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • Most Innovative IDM Projects: Awards at OpenWorld

    - by Tanu Sood
    On Tuesday at Oracle OpenWorld 2012, Oracle recognized the winners of Innovation Awards 2012 at a ceremony presided over by Hasan Rizvi, Executive Vice President at Oracle. Oracle Fusion Middleware Innovation Awards recognize customers for achieving significant business value through innovative uses of Oracle Fusion Middleware offerings. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. This year’s Award honors customers for their cutting-edge solutions driving business innovation and IT modernization using Oracle Fusion Middleware. The program has grown over the past 6 years, receiving a record number of nominations from customers around the globe. The winners were selected by a panel of judges that ranked each nomination across multiple different scoring categories. Congratulations to both Avea and ETS for winning this year’s Innovation Award for Identity Management. Identity Management Innovation Award 2012 Winner – Avea Company: Founded in 2004, AveA is the sole GSM 1800 mobile operator of Turkey and has reached a nationwide customer base of 12.8 million as of the end of 2011 Region: Turkey (EMEA) Products: Oracle Identity Manager, Oracle Identity Analytics, Oracle Access Management Suite Business Drivers: ·         To manage the agility and scale required for GSM Operations and enable call center efficiency by enabling agents to change their identity profiles (accounts and entitlements) rapidly based on call load. ·         Enhance user productivity and call center efficiency with self service password resets ·         Enforce compliance and audit reporting ·         Seamless identity management between AveA and parent company Turk Telecom Innovation and Results: ·         One of the first Sun2Oracle identity management migrations designed for high performance provisioning and trusted reconciliation built with connectors developed on the ICF architecture that provides custom user interfaces for  dynamic and rapid management of roles and entitlements along with entitlement level attestation using closed loop remediation between Oracle Identity Manager and Oracle Identity Analytics. ·         Dramatic reduction in identity administration and call center password reset tasks leading to 20% reduction in administration costs and 95% reduction in password related calls. ·         Enhanced user productivity by up to 25% to date ·         Enforced enterprise security and reduced risk ·         Cost-effective compliance management ·         Looking to seamlessly integrate with parent and sister companies’ infrastructure securely. Identity Management Innovation Award 2012 Winner – Education Testing Service (ETS)       See last year's winners here --Company: ETS is a private nonprofit organization devoted to educational measurement and research, primarily through testing. Region: U.S.A (North America) Products: Oracle Access Manager, Oracle Identity Federation, Oracle Identity Manager Business Drivers: ETS develops and administers more than 50 million achievement and admissions tests each year in more than 180 countries, at more than 9,000 locations worldwide.  As the business becomes more globally based, having a robust solution to security and user management issues becomes paramount. The organizations was looking for: ·         Simplified user experience for over 3000 company users and more than 6 million dynamic student and staff population ·         Infrastructure and administration cost reduction ·         Managing security risk by controlling 3rd party access to ETS systems ·         Enforce compliance and manage audit reporting ·         Automate on-boarding and decommissioning of user account to improve security, reduce administration costs and enhance user productivity ·         Improve user experience with simplified sign-on and user self service Innovation and Results: 1.    Manage Risk ·         Centralized system to control user access ·         Provided secure way of accessing service providers' application using federated SSO. ·         Provides reporting capability for auditing, governance and compliance. 2.    Improve efficiency ·         Real-Time provisioning to target systems ·         Centralized provisioning system for user management and access controls. ·         Enabling user self services. 3.    Reduce cost ·         Re-using common shared services for provisioning, SSO, Access by application reducing development cost and time. ·         Reducing infrastructure and maintenance cost by decommissioning legacy/redundant IDM services. ·         Reducing time and effort to implement security functionality in business applications (“onboard” instead of new development). ETS was able to fold in new and evolving requirement in addition to the initial stated goals realizing quick ROI and successfully meeting business objectives. Congratulations to the winners once again. We will be sure to bring you more from these Innovation Award winners over the next few months.

    Read the article

  • BPM in Financial Services Industry

    - by Sanjeev Sharma
    The following series of blog posts discuss common BPM use-cases in the Financial Services industry: Financial institutions view compliance as a regulatory burden that incurs a high initial capital outlay and recurring costs. By its very nature regulation takes a prescriptive, common-for-all, approach to managing financial and non-financial risk. Needless to say, no longer does mere compliance with regulation will lead to sustainable differentiation. For details, check out the 2 part series on managing operational risk of financial services process (part 1 / part 2). Payments processing is a central activity for financial institutions, especially retail banks, and intermediaries that provided clearing and settlement services. Visibility of payments processing is essentially about the ability to track payments and handle payments exceptions as payments flow from initiation to settlement. For details, check out the 2 part series on improving visibility of payments processing (part 1 / part 2).

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >