Search Results

Search found 4723 results on 189 pages for 'ram amos'.

Page 25/189 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • What hardware makes a good MongoDB Server ? Where to get it ?

    - by João Pinto Jerónimo
    Suppose you're on dell.com right now and you're buying a server to run your MongoDB database for your small startup. You will have to handle literally tens of thousands of writes and reads per minute (but small objects). Would you go for 2 processors ? Invest more on RAM ? I've heard (correct me if I'm wrong) MongoDB handles the most it can on the RAM and then flushes everything to the disk, in that case I should invest on a CPU with a large L2 cache, probably 40GB of RAM and a solid state drive.. right ? Would I be better off with a high end (~$11,309, 2 expensive processors, 96GB of RAM) server or 2x(~$6,419, 2 expensive processors, 12GB of RAM) servers ? Is Dell ok or do you have better sugestions ? (I'm outside the US, on Portugal)

    Read the article

  • How can menu bars that require a right click be activated?

    - by Amos Annoy
    I've noticed that NetworkManager only has a single, left or right, click menu and no longer has an About menu option to show it's splash screen. In fact all the top bar mini short cut icons have been amputated and crippled leaving them with no rights. This severely impacts on our custom aps., similar to FireFox bookmarks, which can no longer be right clicked to bring up a context menu. It is possible to disengage FF's File|Edit|... menu bar from the top by running it in safe-mode so the menu bar is resident in a window, restoring right clicks, but our aps. do not have "safe modes". How can right clicks in menu bars be restored? reference

    Read the article

  • How does one find out which application is associated with an indicator icon in Ubuntu 12.04?

    - by Amos Annoy
    It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? (the examination of SM points out a rather poignant factor in the faster depletion and shortened run time on battery - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously it was well under 10% in 10.04, between 5% and 7%!) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators

    Read the article

  • How can menu bars that require a right click be activated like Ubuntu versions <10.10?

    - by Amos Annoy
    I've noticed that NetworkManager only has a single, left or right, click menu and no longer has an About menu option to show it's splash screen. In fact all the top bar mini short cut icons have been amputated and crippled leaving them with no rights. This severely impacts on our custom aps., similar to FireFox bookmarks, which can no longer be right clicked to bring up a context menu. It is possible to disengage FF's File|Edit|... menu bar from the top by running it in safe-mode so the menu bar is resident in a window, restoring right clicks, but our aps. do not have "safe modes". How can right clicks in menu bars be restored? reference

    Read the article

  • iTunes memory usage

    - by Jordan S. Jones
    Why does iTunes use upwards of 70 megs of ram when it is minimized to my system tray playing music? -- Update -- I understand that iTunes is a resource hog :) What I'm trying to find out, is what part of iTunes is using all that ram. Is it the music library? If I have a smaller music library, will it use less ram? Is it loading all the Album Artwork into ram for some dumb reason? Additionally, is there any recommendations on what someone could do to reduce the amount of ram it is using?

    Read the article

  • Under Windows CE, how can I check which RAM based DLLs are loaded in virtual memory space?

    - by Michal Drozdowicz
    I have a problem with loading a DLL under Windows Mobile 5.0. I'm pretty confident that this is caused by running out of the application virtual memory (the 32 MB slot of the process, as explained in Windows CE .NET Advanced Memory Management). I'm looking for a way to actually make sure that this is the issue and investigate whether my efforts bring expected results. Do you know of a way to check the contents of the virtual memory application slot? Any applications that can help me with this task?

    Read the article

  • How much RAM used by Python dict or list?

    - by Who8MyLunch
    My problem: I am writing a simple Python tool to help me visualize my data as a function of many parameters. Each change in parameters involves a non-trivial amount of time, so I would like to cache each step's resulting imagery and supporting data in a dictionary. But then I worry that this dictionary could grow too large over time. Most of my data is in the form of Numpy arrays. My question: How would one go about computing the total number of bytes used by a Python dictionary. The dictionary itself may contain lists and other dictionaries, each of which contain data stored in Numpy arrays. Ideas?

    Read the article

  • Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

    - by Anthony
    I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

    Read the article

  • Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

    - by Anthony
    I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

    Read the article

  • How to deduplicate 40TB of data?

    - by Michael Stauffer
    I've inherited a research cluster with ~40TB of data across three filesystems. The data stretches back almost 15 years, and there are most likely a good amount of duplicates as researchers copy each others data for different reasons and then just hang on to the copies. I know about de-duping tools like fdupes and rmlint. I'm trying to find one that will work on such a large dataset. I don't care if it takes weeks (or maybe even months) to crawl all the data - I'll probably throttle it anyway to go easy on the filesystems. But I need to find a tool that's either somehow super efficient with RAM, or can store all the intermediary data it needs in files rather than RAM. I'm assuming that my RAM (64GB) will be exhausted if I crawl through all this data as one set. I'm experimenting with fdupes now on a 900GB tree. It's 25% of the way through and RAM usage has been slowly creeping up the whole time, now it's at 700MB. Or, is there a way to direct a process to use disk-mapped RAM so there's much more available and it doesn't use system RAM? I'm running CentOS 6.

    Read the article

  • Automatically Kill/Restart Process(es) When Memory is Critically Low

    - by nemesisfixx
    I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

    Read the article

  • How to effectively have less php-cgi processes running?

    - by João Pinto Jerónimo
    My server is a Linode 512, and on it I run a Wordpress MU with 3 websites (they don't get a lot of visitors) and a couple of NodeJS apps. I need to switch to Lighttpd because Apache 2 was using about 59% of the server's RAM, and now I have the php-cgi processes taking up about 43.6% of the server's RAM: most often 2 processes use 16.5% of the RAM each, 4 processes use 1.8% of the RAM each, and 4 more processes use 0,8% of the RAM, each How can I have less of these processes ? I'm almost sure they're not all needed for the trafic this server gets... I tried only allowing 2 children, but I still have those 10... This is my fastcgi.server section in lighttpd.conf. fastcgi.server = ( ".php" => ( "localhost" => ( "socket" => "/var/run/lighttpd/php-fastcgi.socket", "bin-path" => "/usr/bin/php-cgi", "bin-environment" => ( "PHP_FCGI_CHILDREN" => "2", "PHP_FCGI_MAX_REQUESTS" => "4000" ) ) ) ) What else can I do to tune lighttpd to use less RAM ?

    Read the article

  • MySQL index building performance

    - by Christian
    I tried to build an index over a two columns of a 30,000,000 entry database. I canceled the process after ~60hr as it didn't seem to work. For some reason MySQL takes only 22 mb ram instead of using the RAM fully. Is index building an operation that needs no Ram or is there some way to tell MySQL to use more RAM to be faster?

    Read the article

  • Windows 7 x64 installation freezes on new PC build

    - by jhsowter
    Symptoms While attempting to install Windows 7 (64 bit) on my new PC build, it freezes usually at the point where it is expanding the windows image, but has frozen as early as accepting the licence agreement, and as late as just after the first restart. My specs are at the bottom of the post. So far I have tried the following to identify the problem, in rough chronological order: Tried different hard drives with different sata cables. Same symptoms. I later used a different computer to install windows on the same hard drive with no problems. Tried the RAM in different slots, and tried one RAM stick instead of two. Same symptoms. Updated the BIOS to 1.60. Same symptoms. Ran Memtest86+ with RAM in dual channel. It passed about 6 times when I left it running overnight. Used USB to install windows instead of an optical drive. Same symptoms. Change SATA configuration from AHCI to IDE. Same symptoms. Tried various different SATA ports. Same symptoms. Updated BIOS to 1.70. Same symptoms. I saw the RAM did not list my motherboard as being supported even though the motherboard did list the RAM as being supported. So I tried some Kingston DDR3 1333MHz RAM instead. Same symptoms. Other (possibly) pertinent information My CPU idles at about 30 °C. I can't tell what it gets to when it's working. When I installed the CPU, the lever which locks the CPU in place took quite a bit of force to pull down. Now I didn't just yank it down without rechecking the CPU was seated properly about 5 times, but it does seems unusual, and I wonder if the CPU was seated badly if I would see these symptoms? I am out of ideas and don't know how to diagnose any further. I suppose either the motherboard or CPU must be the problem. I am on the verge of taking it to a specialist. The Question How should I proceed from here? Is there anything I can rule out as being the source of the symptoms I am seeing? My Specs CPU: Intel i5 3570k RAM: G.Skill RipjawsX 8GB kit HDD: single 3.5" 500GB SATA or 160GB 2.5" SATA (at different times and sometime together. But no RAID or anything). MB: ASRock Extreme4 Z77 PSU: Silverstone Strider Plus 600W ST60F-P

    Read the article

  • Updating the value of a math equation with YUI slider and simple radio buttons.

    - by dj lewis
    I have a form that is used to show a price for a product. I have a YUI slider setup that changes the price, and it works perfectly. Now I'm trying to add in radio buttons that also should update that same price value. The price displayed should take into account all 3 fields, and update dynamically as any are updated. This is the code I have, but I don't have any radio buttons for cpanelPrice yet as I'm still just trying to get the IPs to work. <script type="text/javascript"> (function() { var Event = YAHOO.util.Event, Dom = YAHOO.util.Dom, lang = YAHOO.lang, slider, bg="slider-bg", thumb="slider-thumb", orderlink="order-link", monthlyprice="monthly-price", dram="ram", stor="storage",dcpu="cpu",bandw="bandwidth",slid="sliderbg" // The slider can move 0 pixels up var topConstraint = 0; // The slider can move 200 pixels down var bottomConstraint = 585; // Custom scale factor for converting the pixel offset into a real value var scaleFactor = 1; // The amount the slider moves when the value is changed with the arrow // keys var keyIncrement = 65; var tickSize = 65; Event.onDOMReady(function() { slider = YAHOO.widget.Slider.getHorizSlider(bg, thumb, topConstraint, bottomConstraint, tickSize); slider.setValue(1, true); slider.animate = true; slider.getRealValue = function() { return Math.round(this.getValue() * scaleFactor); } slider.subscribe("change", function(offsetFromStart) { var ordnode = Dom.get(orderlink); var prinode = Dom.get(monthlyprice); var ramnode = Dom.get(dram); var stornode = Dom.get(stor); var cpunode = Dom.get(dcpu); var bwnode = Dom.get(bandw); var slidnode = Dom.get(slid); var actualValue = slider.getRealValue(); if (actualValue < 0) { var actualValue = 0; } if (actualValue > -1 && actualValue < 5) { basePrice = 15; var pid = "7"; var ram = "128 MB"; stornode.innerHTML = "5"; cpunode.innerHTML = ".5"; bwnode.innerHTML = "50"; slidnode.innerHTML = "<img src=\"/images/sliderbg1.png\" alt=\"\" />"; } else if (actualValue > 60 && actualValue < 70) { basePrice = 25; var pid = "8"; var ram = "256 MB"; stornode.innerHTML = "10"; cpunode.innerHTML = ".5"; bwnode.innerHTML = "100"; slidnode.innerHTML = "<img src=\"/images/sliderbg2.png\" alt=\"\" />"; } else if (actualValue > 125 && actualValue < 135) { basePrice = 40; var pid = "9"; var ram = "512 MB"; stornode.innerHTML = "20"; cpunode.innerHTML = "1"; bwnode.innerHTML = "200"; slidnode.innerHTML = "<img src=\"/images/sliderbg3.png\" alt=\"\" />"; } else if (actualValue > 190 && actualValue < 200) { basePrice = 60; var pid = "10"; var ram = "1 GB"; stornode.innerHTML = "40"; cpunode.innerHTML = "1"; bwnode.innerHTML = "400"; slidnode.innerHTML = "<img src=\"/images/sliderbg4.png\" alt=\"\" />"; } else if (actualValue> 255 && actualValue < 265) { basePrice = 80; var pid = "11"; var ram = "1.5 GB"; stornode.innerHTML = "60"; cpunode.innerHTML = "1"; bwnode.innerHTML = "600"; slidnode.innerHTML = "<img src=\"/images/sliderbg5.png\" alt=\"\" />"; } else if (actualValue > 320 && actualValue < 330) { basePrice = 110; var pid = "12"; var ram = "2 GB"; stornode.innerHTML = "80"; cpunode.innerHTML = "2"; bwnode.innerHTML = "800"; slidnode.innerHTML = "<img src=\"/images/sliderbg6.png\" alt=\"\" />"; } else if (actualValue > 385 && actualValue < 395) { basePrice = 140; var pid = "13"; var ram = "2.5 GB"; stornode.innerHTML = "100"; cpunode.innerHTML = "2"; bwnode.innerHTML = "1000"; slidnode.innerHTML = "<img src=\"/images/sliderbg7.png\" alt=\"\" />"; } else if (actualValue > 450 && actualValue < 460) { basePrice = 170; var pid = "14"; var ram = "3 GB"; stornode.innerHTML = "120"; cpunode.innerHTML = "3"; bwnode.innerHTML = "1200"; slidnode.innerHTML = "<img src=\"/images/sliderbg8.png\" alt=\"\" />"; } else if (actualValue > 515 && actualValue < 525) { basePrice = 200; var pid = "15"; var ram = "3.5 GB"; stornode.innerHTML = "140"; cpunode.innerHTML = "3"; bwnode.innerHTML = "1400"; slidnode.innerHTML = "<img src=\"/images/sliderbg9.png\" alt=\"\" />"; } else if (actualValue > 580 && actualValue < 590) { basePrice = 240; var pid = "16"; var ram = "4 GB"; stornode.innerHTML = "160"; cpunode.innerHTML = "4"; bwnode.innerHTML = "1600"; slidnode.innerHTML = "<img src=\"/images/sliderbg10.png\" alt=\"\" />"; } // Setup the order link ordnode.innerHTML = "<a href=\"https://account.hostingbeast.com/cart.php?a=add&pid=" + pid + "\"><img src=\"/images/blank.gif\" alt=\"Order VPS Hosting\" height=\"100\" width=\"100\" /></a>"; ramnode.innerHTML = ram; ipPrice = 0; function setIpPrice(ips) { ipPrice = ips.value; } cpanelPrice = 0; prinode.innerHTML = basePrice + ipPrice + cpanelPrice; }); // Use setValue to reset the value to white: Event.on("putval", "click", function(e) { slider.setValue(100, false); //false here means to animate if possible }); setTimeout(function () { slider.setValue(10); },0); }); })(); </script> <div style="width: 649px; margin:auto"> <span id="sliderbg"></span> <div class="yui-skin-sam"> <div id="slider-bg" class="yui-h-slider" tabindex="-1"> <div id="slider-thumb" class="yui-slider-thumb"><img src="/images/thumb-bar.png"></div> </div> </div> </div> <div class="vpsdetails"> <div id="vpsprod"><span id="cpu"></span></div> <div id="vpsram"><span id="ram"></span></div> <div id="vpsstor"><span id="storage"></span> GB</div> <div id="vpsbw"><span id="bandwidth"></span> GB</div> <div id="slideprice">$ <span id="monthly-price"></span></div> </div> <input type="radio" name="ips" value="2" onclick="setIpPrice(this.value - 2 * 2);" checked="checked" /> 2 <input type="radio" name="ips" value="4" onclick="setIpPrice(this.value - 2 * 2);" /> 4

    Read the article

  • Automating Disk Cleanup on Windows using commands

    - by Ram
    Hi, I asked this question on MSDN forum but there was no response.. Maybe I had posted in the wrong forum... So I'm posting it again here, hoping that someone might be able to help me out here... I am trying to run Disk Cleanup in the command prompt (and through a C# program) and so I went through all the available options from this link : http://support.microsoft.com/kb/315246 While I am just trying to understand what I can do, it would be good if someone could explain why the drive option /d cannot be set while specifying /sagerun:n Or is it possible, by some way, to run /sagerun for a specific drive? Pls suggest... Thanks, Ram

    Read the article

  • What does CONTROL mean in the context of the Certificate

    - by Ram
    Hi Everyone, I am trying to implement encryption in sql server 2005 through Certificate and Symmetric Key and i came to know that the application user should have the following access in order to Encrypt and Decrypt Data 1) CONTROL permission on Certificate and 2) REFERENCES on the Symmetric Key (Let me know if i am wrong) Now my concern is what does CONTROL mean in the context of Certificate? If my User1 has Control permission on my certificate Cert1 What all can he do, Is there a way to restrict him further, but user1 still be able to Encrypt\Decrypt the data I could not find any good practice doc for certificate and key management so can some one advice the good practice for this Thanks, Ram

    Read the article

  • Redis, it's memory limit and persistance question?

    - by Kirzilla
    Hello, I'm rather new to Redis and before using it I'd like to learn some important (as for me) details on it. So.... Redis is using RAM and HDD for storing data. RAM is used as fast read/write storage, HDD is used to make this data persistant. When Redis is started it loads all data from HDD to RAM or it loads only often queried data to the RAM? What if I have 500Mb Redis storage on HDD, but I have only 100Mb or RAM for Redis. Where can I read about it? Thank you PS: Sorry for my English

    Read the article

  • SQLServer using too much memory

    - by Israel Pereira Valverde
    I have installed on my desktop machine (with windows 7) SQLServer 2008 R2 Express. I have only one local server running (./SQLEXPRESS) but the sqlserver process is taking ALL the RAM possible. With an machine with 3GB of RAM the things starts to get slow, so I limited the maximun amount of RAM in the server, and now, constantly the SQLServer give some error messages that the memory is not enought. It's using 1GB of RAM with only one LOCAL server with 2 databases completely empty, how 1GB of RAM isn't enought ? When the process start it's using an really acceptable amount of memory (around 80MB) but it's keep increasing until it reaches the maximun defined and start to complain about having not enought memory available. In that point I have to restart the server to use it again. I have read about an hotfix to solve one of the errors I got from sqlserver: There is insufficient system memory in resource pool 'internal' to run this query But it's already installed on my sqlserver. Why it's using so much memory?

    Read the article

  • Iframe scrolls over the fixed header in IE 11 , how to make it scroll under/behind the header?

    - by Ram
    In my html page, I have a header and its position is fixed. In the contant or body of the page I have an Iframe to display a youtube video and other DIV tabs. In other browsers like chrome, Morzilla etc all the contants schrolls behind the header and works fine!!. But In IE (IE 11), only the youtube video in Iframe scrolls over/aboves the header. How can I make it to scroll behind the header in IE. Thank in advance

    Read the article

  • How to execute msdb.dbo.sp_start_job from a stored procedure in user database in sql server 2005

    - by Ram
    Hi Everyone, I am trying to execute a msdb.dbo.sp_start_Job from MyDB.dbo.MyStoredProc in order to execute MyJob 1) I Know that if i give the user a SqlAgentUser role he will be able to run the jobs that he owns (BUT THIS IS WHAT I OBSERVED : THE USER WAS ABLE TO START/STOP/RESTART THE SQL AGENT SO I DO NOT WANT TO GO THIS ROUTE) - Let me know if i am wrong , but i do not understand why would such a under privileged user be able to start/stop agents . 2)I know that if i give execute permissions on executing user to msdb.dbo.Sp_Start_job and Enable Ownership chaining or enable Trustworthy on the user database it would work (BUT I DO NOT WANT TO ENABLE OWNERSHIP CHAINING NOR TRUSTWORTHY ON THE USER DATABASE) 3)I this this can be done by code signing User Database i)create a stored proc MyDB.dbo.MyStoredProc ii)Create a certificae job_exec iii)sign MyDB.dbo.MyStoredProc with certificate job_exec iv)export certificate msdb i)Import Certificate ii)create a derived user from this certificate iii)grant authenticate for this derived user iv)grant execute on msdb.dbo.sp_start_job to the derived user v)grant execute on msdb.dbo.sp_start_job to the user executing the MyDB.dbo.MyStoredProc but i tried it and it did not work for me -i dont know which piece i am missing or doing wrong so please provide me with a simple example (with scripts) for executing msdb.dbo.sp_start_job from user stored prod MyDB.dbo.MyStoredProc using code signing Many Many Many Thanks in Advance Thanks Ram

    Read the article

  • onclick event in dropdown

    - by raam
    <html> <head> </style> <script type="text/javascript"> function ram(){ document.write("Hello World!") alert("ok"); } </script> </head> <body> <select id="country"> <option value="India" id="101" onfocus="ram()">India</option> <option value="Autralia" id="102" onClick="ram();">Autralia</option> <option value="England" id="103" onfocus="ram();">England</option> <option value="Ameriaca" id="104" onfocus="ram();">Ameriaca</option> <option value="Pakistan" selected="selected" id="105" onfocus="ram();" >Pakistan</option> </select> </body> </html> In this above code the event will not fire for dropdown. I try by using focus and click event. I can I do this and I want 1 more thing if I select dropdown value as India, I want to create a dropdown with state (elements are TN, DL, etc) updation.

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >