Search Results

Search found 5723 results on 229 pages for 'turing machines'.

Page 25/229 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• How do I make ESXi 5.0 to shutdown virtual machines when the physical power button is pushed?

  - by Pawel Sawicki

  I have a home NAS/DLNA server built out of an HP Micro Server with the HP branded VMware ESXi 5.0.0 build-623860 (free license) installed. Being a home media center I'd like it to be "manageable" by all my household members. This requires that it needs to be powered on an off (including all the VMs inside) by anybody with the physical access to the server by simply pressing the power button on the chassis. The "startup" part is easy to obtain - all I had to do was to configure the startup/shutdown policy: Once the server powers up, all VMs start as well and that's exactly what I need. Well.. it did work up until 5.0.0U1, but that's a different story: http://blogs.vmware.com/vsphere/2012/03/free-esxi-hypervisor-auto-start-breaks-with-50-update-1.html Unfortunately, pressing the power button doesn't gracefully shutdown the guest machines - they are terminated instead. If I run the "shut down" command from the vSphere Client interface guests are powered off. I'd like to get the same end result when the physical power button is switched. I've poked around a bit on the ESXi server. There's a "/sbin/shutdown.sh" script that seemed to do exactly what I need... but after trying it does exactly what the power off button. The "/etc/inittab" contains an entry for the "shutdown" level but I suppose it's not hooked to the power button. I can't find any acpi related configuration, neither do I know what exactly is executed when the power button is pressed. Does anybody have a clue how can I make the VMs shutdown automatically when the physical power switch is pressed to turn of the computer?

  Read the article

• How do I load balance between two Linux machines?

  - by William Hilsum

  Inspired by the Stack Overflow network, I am now obsessed with HAProxy and trying to use it myself. At the moment, each HAProxy box has got two network cards (well, two configured, I can have a maximum of 4 and wasn't sure if they needed their own one for management between the boxes). On both machines, the backend one (eth1) is a private IP that goes to a switch connected to the webservers, and the front facing one (eth0) has a public internet IP that is routed straight though. In addition, I have created an additional virtual ip for eth0 called eth0:0 which has got a third public ip address. I just about get how to use it for load balancing between multiple web servers that are behind it, but, I am failing to load balance between the two HAProxy boxes - they appear to fight for the virtual IP, but, this does not appear to be a smart solution. Now, by using the virtual shared IP address, this solution appears to work and does seem to give me maximum uptime, but, is this the correct way to do it, or is there a smarter way? I have been looking at other Linux packages such as keepalived, but, I have only been using Linux (server) for a week now and am at the limits of my understanding. Is there anyone who has done this before and can you advise anything for maximum uptime?

  Read the article

• Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

  - by kafka

  All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

  Read the article

• How can I install .NET framework 3.5 on XP machines without internet connection?

  - by EricSchaefer

  I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

  Read the article

• How to backup virtual machines on a standalone ESXi host?

  - by Massimo

  Standalone ESXi (4.1) host without any vCenter Server. How to backup virtual machines as quickly and storage-friendly as possible? I know I can access the ESXi console and use the standard Unix cp command, but this has the downfall of copying the whole VMDK files, not only their actually used space; so, for a 30-GB VMDK of which only 1 GB is used, the backup would take 30 full GBs of space, and time accordingly. And yes, I know about thin-provisioned virtual disks, but they tend to behave very badly when physically copied, and/or to blow up to their full provisioned size; also, they are not recommended for actual VM performance. It is ok for me to shut down the VMs before backing them up (i.e. I don't need "live" backups); but I need a way to copy them around efficiently; and yes, a way to automate shutdown/startup when taking a backup would also help. I only have ESXi; no Service Console, no vCenter Server... what's the best way to handle this task? Also, what about restores?

  Read the article

• Turing's Craft exercise stumped me... seems too easy.

  - by Chris

  "Write a for loop that prints the integers 1 through 40, separated by spaces or new lines. You may use only one variable, count which has already been declared as an integer." So I use... for(count = 1; count <= 40; count++) { cout << " " << count; } but they are using stdio.h as the only header and cout is not recognized. It hints that the output format should be (" ",count), but I can't figure out what print function to use. stdio.h can use fprintf or fwrite, but I don't have enough parameters for either function. Any ideas?

  Read the article

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

• Dynamic State Machine in Ruby? Do State Machines Have to be Classes?

  - by viatropos

  Question is, are state machines always defined statically (on classes)? Or is there a way for me to have it so each instance of the class with has it's own set of states? I'm checking out Stonepath for implementing a Task Engine. I don't really see the distinction between "states" and "tasks" in there, so I'm thinking I could just map a Task directly to a state. This would allow me to be able to define task-lists (or workflows) dynamically, without having to do things like: aasm_event :evaluate do transitions :to => :in_evaluation, :from => :pending end aasm_event :accept do transitions :to => :accepted, :from => :pending end aasm_event :reject do transitions :to => :rejected, :from => :pending end Instead, a WorkItem (the main workflow/task manager model), would just have many tasks. Then the tasks would work like states, so I could do something like this: aasm_initial_state :initial tasks.each do |task| aasm_state task.name.to_sym end previous_state = nil tasks.each do |tasks| aasm_event task.name.to_sym do transitions :to => "#{task.name}_phase".to_sym, :from => previous_state ? "#{task.name}_phase" : "initial" end previous_state = state end However, I can't do that with the aasm gem because those methods (aasm_state and aasm_event) are class methods, so every instance of the class with that state machine has the same states. I want it so a "WorkItem" or "TaskList" dynmically creates a sequence of states and transitions based on the tasks it has. This would allow me to dynamically define workflows and just have states map to tasks. Are state machines ever used like this?

  Read the article

• Analyzing Windows crash dumps generated on XP/32 machines with Win7/64 ?

  - by Martin

  We have a problem with analyzing our Windows crash-dumps that were created on customer Windows XP/32 boxes on our development machines. Many of our development machines are now Win7/64 boxes, but it appears that the crash-dumps generated under Windows XP cannot full resolve their binary dependency, thereby leading to warnings when displaying the call stacks in Visual Studio (2005). For example, the msvcr80.dll cannot be resolved when loaded from a Win7 machine when the dump was generated on Windows XP: On XP, the WinSxS path appears to be C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\msvcr80.dll -- on Win7, the WinSxS path to the same DLL version seems to be: x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4053_none_d08d7da0442a985d (I got this info from a forum thread on codeguru that link to an msdn article.) Visual Studio (2005) can now no longer correctly resolve the binaries for the crash-dump. How can I get Visual Studio to resolve all the correct binaries for my dump file? Note: I have already correctly set up the symbol server. The public symbols for most system DLLs (kernel32.dll, etc) and our symbols of our own DLLs are correctly loaded. It is just that the symbols of DLLs that reside in the WinSxS folder are not loaded, because it appears that Vista/7 uses a different path scheme for these DLLs than XP does and therefore Visual Studio cannot find the dll (not the pdb) on the local dev machine and so cannot load the corresponding symbols for the dump file.

  Read the article

• MySql ODBC connection in VB6 on WinXP VERY slow. Other machines on same network are fast.

  - by Matthew

  Hi All, I have a VB6 application that has been performing very well. Recently, we upgraded our server to a Windows 2003 server. Migration of the databases and shares went well and we experienced no problems. Except one. And it has happened at multiple sites. I use the MySQL ODBC 5.1 connector to point to my MySQL database. On identical machines (as far as I can tell, they are client machines not ours), access to the DB is lightning fast on all but one computer. They use the same software and have the same connection strings. And I'm sure it's not the program, but the ODBC connection. When I press the 'Test Connection' button in the ODBC connection string window, it can take up to 10 seconds on the poorly performing machine to respond with a success. All the other computers are instantaneous. I have tried using ip address versus the machine name in the UDL, no change. I enabled option 256, which sped it up initially, but it's slow again. Most of the time on a restart the program will be fast for an hour or so then go slow again with the option 256 enabled. Frankly, I am out of ideas and willing to entertain any and all ideas or suggestions. This is getting pretty frustrating. Anyone ever experience anything like this?

  Read the article

• cannot access a site from Mac OSX Lion but can from other machines on network?

  - by house9

  SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

  Read the article

• Using Excel.Application in ASP where Excel is installed on Client Machines instead of the Server.

  - by simonalexander2005

  Hi, I have a server with an asp page on it that generates a report in Excel, using the Excel.Application object. Normally, Excel would have to be installed on the server to work. I was wondering, however, if it is possible to utilise the excel install on client machines to do this instead, as I can't install Excel on the server? Thanks for any help you can give

  Read the article

• How do I get the Virtual Machines folder on Win7?

  - by xpmore

  I'm writing a tool called XP-More, which should help manage Windows 7 Virtual Machines. The first thing the tool has to do when launched is find the VM folder. However, turns out that folder is not listed as a Windows Special Folder. I use a workaround, but it's unreliable. Ideally, Environment.GetFolderPath(Environment.SpecialFolder.VMFolder) or so would have done the job, but VMFolder is a fiction of my imagination. Is there any real way to get that folder?

  Read the article

• What application virtual machines are written in high level languages?

  - by jeshan

  What application virtual machines are out there that are written in higher level languages? C/C++ looks like the languages of choice (for obvious reasons). What I have found on google is at least two written in Java (both meta-circular) : JikesRVM and Maxine. Anything else that you have found?

  Read the article

• Is is feasible to use the single self-signed certificate on multiple machines which are two way ssl

  - by Vinds

  I have came across a situation where I need to have same certificate on 4 machines which are communicating with each other in a two way ssl. Will it be problematic to have same certificate on client as well as server side for two way ssl communication.? Thanks, Vinds

  Read the article

• What is the reason for the rise of programmers using Apple machines?

  - by jassuncao

  I noticed a rise in the number of developers (mostly doing web development) using Apple machines. Does Mac OS offer a better environment for programming or is it because of the hardware? What are the reasons?

  Read the article

• Best way to cache apt downloads on a LAN?

  - by Ken Simon

  I have multiple Ubuntu machines at home and a pretty slow internet connection, and sometimes multiple machines need to be updated at once (especially during new Ubuntu releases.) Is there a way where only one of my machines needs to download the packages, and the other machines can use the first machine to get the debs? Does it involve setting up my own local mirror? Or a proxy server? Or can it be made simpler?

  Read the article

• Best way to cache apt downloads on a LAN?

  - by Ken Simon

  I have multiple Ubuntu machines at home and a pretty slow internet connection, and sometimes multiple machines need to be updated at once (especially during new Ubuntu releases.) Is there a way where only one of my machines needs to download the packages, and the other machines can use the first machine to get the debs? Does it involve setting up my own local mirror? Or a proxy server? Or can it be made simpler?

  Read the article

• on some Windows machines, skinned applications sometimes loses their skin. any ideas?

  - by Lior

  Hi we are developing a skinned application, and under vista/windows 7, on some machines, skinned applications sometimes loses their skin. here's an example for the problem, and here's how the application looks when it's good. this happens to us whether we develop with native Win32 API or in QT. It happens spontanously, with no event that might explain it. btw, we see it happens sometimes to some other applications, too we solve it by repainting everything every 2-3 seconds. but this is an ugly hack... any ideas why this could happen? thanks _very_much_ for any lead - Lior

  Read the article

• Why does Perl's Crypt::SSLeay timeout on Intel Mac OS X machines?

  - by Joe

  A have a Perl cron job that recently started having its HTTPS connections start failing with an error of "500 SSL read timeout". I've tracked that the error is being thrown as part of an alarm in Crypt::SSLeay, but I don't know if this is simply something taking too long to respond. So far, I've adjusted the timeout from the default 30 seconds to 10 minutes and it still times out. I've moved the script to other machines, and those on Intel Mac OS X systems all time out, while those under Linux, or on PPC Mac OS X systems run fine, so I don't think it's changes on the network or remote server. When the process started having problems does not coincide with any software updates or reboots on the machine, and I've contacted the server I'm connecting to, and everyone claims that they haven't changed anything. Does anyone have recommendations on trying to debug HTTPS, or have you ever seen this behavior and give recommendations on something I might've overlooked at that could've caused this problem?

  Read the article

• How to maintain fixed size of C variable types over different machines?

  - by Alex

  I've all this kind of functions. ssize_t fuc1(int var1, void *buf, size_t count); int func2(char *charPtr, int mode, int dev); short func3( long var2); problem is that data types in C has different sizes when compiled on different machines(64bit & 32bit). This is true for even void*. For some reasons. I need to ensure that these sizes all are same on every machine(64bit & 32bit). So, how should I modify these ?

  Read the article

• Method for SharePoint list/item locking across processes/machines?

  - by Steve

  In general, is there a decent way in SharePoint to control race conditions due to two processes or even two machines in the farm operating on the same list or list item at the same time? That is, is there any mechanism either built in or that can be fabricated via the Object Model for doing cross-process or cross-machine locking of individual list items? I want to write a timer job that performs a bunch of manipulations on a list. This list is written to by the SharePoint UI and then read by the UI. I want to be able to make sure that the UI doesn't either write to or read from the list when it is in an inconsistent state due to the timer job being in the middle of a manipulation. Is there any way to do this? Also, I want to allow for multiple instances of the timer job to run simultaneously. This, again, will require a lock to be sure that the two jobs don't attempt to operate on the same list/item at the same time. TIA for any help!

  Read the article

• XP, how to apply security to files, now have simple file sharing and can't access some files from other machines ?

  - by Jules

  For a month or two now I've been using simple file sharing, for several months before that I didn't, then before that I had simple file sharing tuned on. So at the moment I don't have a security tab (on files or folders) or sharing permissions settings there too. As an example, from another machine, I can access files from 2007 but not from the summer of last year in the same folder. I can access all files on that local machine. So I think I just need to re-apply security or permissions somehow? What should I do?

  Read the article

• Run Microsoft SCCM Remote Control Viewer on Client Machines?

  - by David Mackey

  I've install SCCM 2012 on a server and have successfully used the Remote Control option to take control of a system I've setup to be managed by SCCM. Now, I don't want to have to log in to a server every time I want to access this client...is there a way to run the Remote Control Viewer client on my desktop OS so I can take remote control of systems rather than having to remote in from the server? This seems like very basic functionality...but I haven't been able to figure it out thus far.

  Read the article

• Can I set up OpenVPN on two or more machines so that they can each act as client and server?

  - by ianfuture

  The question summarises what I want to achieve. In more detail: I have a Windows XP Pro PC at a work location that I want to be able to access my home Windows XP Pro PC and other home computers from. But I also want to be able to connect to the work PC from home. I think the term generally used is a "mesh" network. Can I do this with OpenVPN ? If so how would I do it? What are the most important things to remember to do? EDIT: The work Windows XP Pro PC is largely managed by IT Dept, I do have local admin rights to install things. Some settings are disabled. My main concern was firewalls and port forwarding on the work PC. Any suggestions?

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >