Search Results

Search found 976 results on 40 pages for 'vms'.

Page 25/40 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

  - by chrisling106

  Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

  Read the article

• Virtualizing OpenSolaris with physical disks

  - by Fionna Davids

  I currently have a OpenSolaris installation with a ~1Tb RaidZ volume made up of 3 500Gb hard drives. This is on commodity hardware (ASUS NVIDIA based board on Intel Core 2). I'm wondering whether anyone knows if XenServer or Oracle VM can be used to install 2009.06 and get given physical access to the three SATA drives so that I can continue to use the zpool and be able to use the Xen bits for other areas. I'm thinking of installing the JeOS version of OpenSolaris, have it manage just my ZFS volume and some other stuff for work(4GB), then have a Windows(2GB) and Linux(1GB) VM (theres 8Gb RAM on that box) virtualised for testing things. Currently I am using VirtualBox installed on OpenSolaris for the Windows and Linux testing but wondered if the above was a better alternative. Essentially, 3 Disks - OpenSolaris Guest VM, it loads the zpool and offers it to the other VMs via CIFS.

  Read the article

• How to make a DHCP server on virtual machine serves other virtual machines(on different physical machines)?

  - by Tony

  I'm building a virtual cluster with VirtualBox and Opensuse. I have 10 physical machines and need several vms on each. The virtual machines are supposed to be in a "private" network, but still have internet access. I was asked to set up a virtual head node working as DHCP server. I installed DHCP server on the virtual head node and it seems works. On VirtualBox I set 2 network adapters to the head node, one bridged adapter and one internal network. One vm on the same physical machine has been set nic as internal network adapter. The vm can get IP address (so DHCP works) but can't access internet. What should I do? Specifically, what network adapter should I choose for head-node and work-nodes in VirtualBox? What in the virtual machines should I do?

  Read the article

• need help writing puppet module for sssd.conf using Hiera

  - by mr.zog

  I need to build a module to manage /etc/sssd/sssd.conf on our Red Hat VMs. The sssd modules published on the forge don't seem to do what I want, nor do I feel like forking any of them. I want to keep all the configuration data in Hiera's common.yaml file. Below is my sssd.conf file. [sssd] config_file_version = 2 services = nss, pam domains = default [nss] filter_groups = root filter_users = root reconnection_retries = 3 entry_cache_timeout = 300 entry_cache_nowait_percentage = 75 [pam] [domain/default] auth_provider = ldap ldap_id_use_start_tls = True chpass_provider = ldap cache_credentials = True ldap_search_base = dc=ederp,dc=com id_provider = ldap ldap_uri = ldaps://lvldap1.lvs01.ederp.com/ ldaps://lvldap2.lvs01.ederp.com/ ldap_tls_cacertdir = /etc/openldap/cacerts What is the best, most economical way to build the sssd.conf file? Should I have multiple .pp files such as domain.pp, pam.pp etc. or should all the lines of configuration land in init.pp?

  Read the article

• KeepLevelReg settings to eliminate sync prompts - errors occurred while Windows was synchronizing your data

  - by Detritus Maximus

  We have 2 XP pro VMs (Citrix) that both have problems with logout prompts appearing during logout. Users are closing the rdc before these appear: The Microsoft solution involves the creation of the KeepProgressLevel registry entry along with a value of 1 for "pause on errors." I have implemented this across the domain for this problem, yet these 2 VM's continue to have the prompts. Today, I experimented by changing the KeepProgressLevel option to 0. This is not one of the options given by MS, yet I stopped getting the prompts. Can anyone tell me what I've done by setting the value to 0? Have I basically turned off the feature as if the KeepProgressLevel entry is gone? If so, why no more prompts? I did notice during logoff that there is a red x and error message, yet no prompt.

  Read the article

• Keeping rackspace vserver alive

  - by mit

  It appears to me that rackspace somehow freezes cloud VMs after some idle time. This means the first page request to a php page takes much longer to respond than the subsequent requests. I am actually querying a machine with wget from a different host now to keep it "alive". But I wonder what frequency would be necessary. Does anyone know the time period after which they send a VM to "sleep"? I guess it would be some minutes. EDIT: There is no caching involved on the php site. It just recently moved from another vhost and there was never such latency on the first request.

  Read the article

• Setting DNS suffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• VMware Server guest systems are extremely slow with IO load on host (Ubuntu 8.04)

  - by Dennis G.

  We are experiencing performance issues with a VMware Server 2.x installation on an Ubuntu 8.04 host. When the host system is generating IO load (for example, copying large files as part of a backup operation), the guests (also Ubuntu 8.04) become extremely unresponsive and slow (simple Apache HTTP requests taking 5 seconds instead of the usual 200ms). We tried optimizing various aspects of the VMs, but the issue remains. Is there a known bug with VMware performance under linux if host IO load is high? Is there a way to fix this? Is this only an issue with Ubuntu systems, or have you seen it on other systems before? Thanks!

  Read the article

• Tools to monitor guest OS performance in vSphere

  - by Quick Joe Smith

  I am looking for some tool or way to retrieve performance data from guest VMs running under vSphere 4.1. I am currently interested in the 4 basic metrics: CPU(%), Memory(%), Disk availability(%) & Network utilisation(Kb/s). The issue I have is that all of vSphere's performance data is from a ESXi host perspective (active, shared, consumed, overhead, swapped etc.) which is far removed from the data from the VM's own perspective. For instance, I have a Windows server VM idling, using around 410MB (~25% of its allocated 2GB) as reported by Task Manager, and this is the value I'm after. vSphere's metrics seem unable to arrive at this figure by any reliable and repeatable means. Is anyone aware of tools that can obtain this kind of data? The simpler, the better.

  Read the article

• How can I set up VLANs in a way that won't put me at risk for VLAN hopping?

  - by hobodave

  We're planning to migrate our production network from a VLAN-less configuration to a tagged VLAN (802.1q) configuration. This diagram summarizes the planned configuration: One significant detail is that a large portion of these hosts will actually be VMs on a single bare-metal machine. In fact, the only physical machines will be DB01, DB02, the firewalls and the switches. All other machines will be virtualized on a single host. One concern that has been is that this approach is complicated (overcomplicated implied), and that the VLANs are only providing an illusion of security, because "VLAN hopping is easy". Is this a valid concern, given that multiple VLANs will be used for a single physical switch port due to virtualization? How would I setup my VLANs appropriately to prevent this risk? Also, I've heard that VMWare ESX has something called "virtual switches". Is this unique to the VMWare hypervisor? If not, is it available with KVM (my planned hypervisor of choice)?. How does that come into play?

  Read the article

• How to present shared storage for MS Cluster Services running on vSphere 5

  - by MDMarra

  I've seen two approaches to handling the presentation of shared storage to Windows Server 2008 R2 cluster VMs on VMWare vSphere. One is the traditional method of carving out a LUN on your SAN and presenting it to both hosts through the Microsoft ISCSI software initiator. The other method is to make a vmdk on an existing LUN and attach it to both hosts and made it an independent disk so that it isn't affected by snapshots. Is one way the "correct" way, or are both viable? Is there any advantage or disadvantage to doing either?

  Read the article

• Setting DNS Siffix for multiple network adapters in a VM

  - by arun_bh

  Is there a way to set the DNS Suffix for multiple network adapters in a VM using the sysprep file? We are trying to setup Windows 2003 VMs with 2 network adapters. In the one adapter case the sysprep we are able to set the suffix using DNSDomain. But this doesnt work in the 2 adapter case. The The VM is setup corrently though without any issues but one of our apps relies on the DNS Suffix value to work correctly. Thanks in advance.

  Read the article

• Make 2 virtual machines ping in virtual box

  - by darkheir

  I'm trying to make 2 virtual machines communicate in Virtual Box, but whitout any success. Here are the step I have done: I setted both VMs in Internal networking mode (using VBoxManage modifyvm "VM name" --nic<x> intnet) I setted the DHCP server that is built into VirtualBox to manage IP addresses :VBoxManage dhcpserver add --netname intnet --ip 10.13.13.100 --netmask 255.255.255.0 --lowerip 10.13.13.101 --upperip 10.13.13.254 --enable But then both of the VM have the same IP Adresse (10.13.13.101) and even if set the IP manually, the Virtual Machines are not pinging each other.

  Read the article

• Configuring BIND to use VM's DNS for specific domain

  - by Srirangan

  I work on a project for which I use an Ubuntu server vm on an Ubuntu host. The VM runs all the services / webapps through haproxy and nginx and serves it on the domain (xyz.com). I manually modify my resolv.conf to use the VMs IP address as the nameserver and I can run my app on the host browser. The problem is I am modifying an auto-generated file (resolv.conf) and I need to do it each time. Is there a smart way to say: -- are you accessing xyz.com? -- if yes use VM's DNS server, else use the hosts

  Read the article

• Convert VM running on Linux hypervisor to OVF/VMDK

  - by blade

  Hi, I have a bunch of VMs on a Linux hypervisor (cloudsigma.com to be precised). I want to convert these to deploy to an ESX hypervisor (opsource cloud server), but need to create an ovf with the vmdk. I don't have access to the hypervisor of either service but opsource allow me to import ovf/vmdk so this is possible. What tool can create an ovf (With vmdk) of a Windows OS? I am not sure if VCenter Converter would work as it requires access to the hypervisor, if I remember correctly. I am hoping for something like vhd2disk which will create a .vhd of the currently running, parent Windows OS on a system. Thanks

  Read the article

• Configuring BitLocker on existing Windows Server 2008

  - by neildeadman

  On our file server, we want to enable BitLocker so that we can encrypt a single drive and I know that we have to also encrypt the drive the system is installed on. In my tests with VMs, I have to create a partition on the same disk as Windows is installed either before I install Windows or after (I can use the BitLocker Drive Preparation Tool). This tool shrinks the C: drive to make way for a 1.5GB partition. I'm a little concerned about doing this with a live system so wanted to see if it was possible to get BitLocker to use a partition on another drive?

  Read the article

• Adaptec 2020SA RAID controller Set up in RAID5, one drive went down, can I still get data?

  - by SJaguar13

  I have 6 1tb drives in a RAID5. 1 drive went down. On the RAID was 2 virtual machines that I really need back up and running. The spare drive I have to put in the server is a 1.5tb drive, which exceeds the physical per drive limit of the 2020SA. The drive is found in the disk utility, but it is not found in the array management section. I cannot add the drive to the array to have it rebuild. I have a replacement drive along with some spares on their way from Newegg, but I am still looking at a few days of downtime. Is it possible to use the 5 working drives to get the VMs copied off and on to another server or do I just have to wait for the drives to get here?

  Read the article

• How do I make a Windows virtual machine replicate to another datacenter/cloud?

  - by zippy

  We have a Windows 2008 VM running IIS and SQL Server Express (it's an all-in-one web application). We need to have another copy at our secondary datacenter site. What is the best way to do this? It doesn't have to be running all the time but it has to have almost the latest copy of the current VM. I took a look at VMWare Fault Tolerance and after the heart attack at the price I starting looking for another solution. If need be I wouldn't mind copying it over to a cloud VM provider, if I can find one that lets me copy my own VMs up and start them up without any conversion process.

  Read the article

• Full screen not available in vmplayer 6 (on Linux)

  - by Simon

  I recently updated vmware player from 5.0.2 to 6.0.0, and now the "full screen" menu item is always grayed out. It happens with all my VMs, regardless of the guest OS. "Enter Unity" is still available for some reason. When I edit a VM to start up in full screen it works, but once I leave full screen I can't go back, which is really annoying. I've no clue where to start looking for the cause. I'm seeing this on Ubuntu 13.04 and OpenSUSE 12.3.

  Read the article

• What disk setup is needed / best practice for hypervisor-only servers?

  - by Luke404

  Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

  Read the article

• VMWare ESX installation on sata disk

  - by ilansch

  I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• Why is idle windows VM using so much CPU?

  - by Jeff Shattock

  I have 2 VMs running as guests on a KVM virtualization platform running on Ubuntu 10.04. One VM is an Ubuntu 10.04 system, the other is a Windows 7 system. When both machines are completely logged out, the Linux machine uses 1% CPU, the Windows one 45-50%, according to top. The graphs in virt-manager seem to back this up. Theres nothing installed on the Win7 image that would be running in the background; its as fresh as can be. Why is the Windows VM using so much more than the Linux VM, when both are logged out and idling?

  Read the article

• using wbadmin to backup and recover

  - by g7rpo

  HI I am using wbadmin to perform backups of a specific folder, primarily to backup my VHD files this is working fine but I tried to recover the files today using a different machine to the one which created the backup and couldnt get the machine doing the recovery to 'see' the backups. Is there a way to do this as my worry is that if I have a failure on the host which is perfmorming the backups I need to be able to install hyper-v on another host and recover the backed up VMs to there until I can rebuild the host. It appears that this isnt possible, I am hoping I am missing something. Any help would be greatly appreciated.

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >