websphere tx - Page 25 - Developer IT

Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

- by user1622959

A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

Read the article

My internet connection slows or dies unexpectedly

- by genesis

I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Read the article

Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

- by user42424

So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

Read the article

Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

- by Korakys

Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

Read the article

How to know my wireless card has injection enabled?

- by shrimpy

I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

Read the article

Unable to change IP address for eth0 without restart in Ubuntu

- by Rodnower

I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

Read the article

How to map a VPN (tun0) network adapter on host Ubuntu to a VirtualBox guest Windows?

- by Mashimom

I have a Ubuntu 10.04 running Oracle VirtualBox 3.2.6 with a Windows XP guest. I use a VPN that I would like to be accessed by the guest VM, on a ifconfig it shows as: tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.192.10.99 P-t-P:5.192.10.99 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1362 Metric:1 RX packets:14151 errors:0 dropped:0 overruns:0 frame:0 TX packets:19860 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:4415271 (4.4 MB) TX bytes:17949982 (17.9 MB) Using NAT or Bridge adapters on the VM only gives me the non-vpn adapter. How can I map the tun0 adapter to VirtualBox?

Read the article

Unable chage IP address for eth0 without restart in Ubunto

- by Rodnower

I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

Read the article

What command line tools for monitoring host network activity on linux do you use?

- by user27388

What command line tools are good for reliably monitoring network activity? I have used ifconfig, but an office colleague said that its statistics are not always reliable. Is that true? I have recently used ethtool, but is it reliable? What about just looking at /proc/net 'files'? Is that any better? EDIT I'm interested in packets Tx/Rx, bytes Tx/Rx, but most importantly drops or errors and why the drop/error might have occurred.

Read the article

Hibernate/Spring: failed to lazily initialize - no session or session was closed

- by Niko

I know something similar has been asked already, but unfortunately I wasn't able to find a reliable answer - even with searching for over 2 days. The basic problem is the same as asked multiple time. I have a simple program with two POJOs Event and User - where a user can have multiple events. @Entity @Table public class Event { private Long id; private String name; private User user; @Column @Id @GeneratedValue public Long getId() {return id;} public void setId(Long id) { this.id = id; } @Column public String getName() {return name;} public void setName(String name) {this.name = name;} @ManyToOne @JoinColumn(name="user_id") public User getUser() {return user;} public void setUser(User user) {this.user = user;} } @Entity @Table public class User { private Long id; private String name; private List events; @Column @Id @GeneratedValue public Long getId() { return id; } public void setId(Long id) { this.id = id; } @Column public String getName() { return name; } public void setName(String name) { this.name = name; } @OneToMany(mappedBy="user", fetch=FetchType.LAZY) public List getEvents() { return events; } public void setEvents(List events) { this.events = events; } } Note: This is a sample project. I really want to use Lazy fetching here. I use spring and hibernate and have a simple basic-db.xml for loading: <?xml version="1.0" encoding="UTF-8"? <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-3.0.xsd" <bean id="myDataSource" class="org.apache.commons.dbcp.BasicDataSource" destroy-method="close" scope="thread" <property name="driverClassName" value="com.mysql.jdbc.Driver" / <property name="url" value="jdbc:mysql://192.168.1.34:3306/hibernateTest" / <property name="username" value="root" / <property name="password" value="" / <aop:scoped-proxy/ </bean <bean class="org.springframework.beans.factory.config.CustomScopeConfigurer" <property name="scopes" <map <entry key="thread" <bean class="org.springframework.context.support.SimpleThreadScope" / </entry </map </property </bean <bean id="mySessionFactory" class="org.springframework.orm.hibernate3.annotation.AnnotationSessionFactoryBean" scope="thread" <property name="dataSource" ref="myDataSource" / <property name="annotatedClasses" <list <valuedata.model.User</value <valuedata.model.Event</value </list </property <property name="hibernateProperties" <props <prop key="hibernate.dialect"org.hibernate.dialect.MySQLDialect</prop <prop key="hibernate.show_sql"true</prop <prop key="hibernate.hbm2ddl.auto"create</prop </props </property <aop:scoped-proxy/ </bean <bean id="myUserDAO" class="data.dao.impl.UserDaoImpl" <property name="sessionFactory" ref="mySessionFactory" / </bean <bean id="myEventDAO" class="data.dao.impl.EventDaoImpl" <property name="sessionFactory" ref="mySessionFactory" / </bean </beans Note: I played around with the CustomScopeConfigurer and SimpleThreadScope, but that didnt change anything. I have a simple dao-impl (only pasting the userDao - the EventDao is pretty much the same - except with out the "listWith" function: public class UserDaoImpl implements UserDao{ private HibernateTemplate hibernateTemplate; public void setSessionFactory(SessionFactory sessionFactory) { this.hibernateTemplate = new HibernateTemplate(sessionFactory); } @SuppressWarnings("unchecked") @Override public List listUser() { return hibernateTemplate.find("from User"); } @Override public void saveUser(User user) { hibernateTemplate.saveOrUpdate(user); } @Override public List listUserWithEvent() { List users = hibernateTemplate.find("from User"); for (User user : users) { System.out.println("LIST : " + user.getName() + ":"); user.getEvents().size(); } return users; } } I am getting the org.hibernate.LazyInitializationException - failed to lazily initialize a collection of role: data.model.User.events, no session or session was closed at the line with user.getEvents().size(); And last but not least here is the Test class I use: public class HibernateTest { public static void main(String[] args) { ClassPathXmlApplicationContext ac = new ClassPathXmlApplicationContext("basic-db.xml"); UserDao udao = (UserDao) ac.getBean("myUserDAO"); EventDao edao = (EventDao) ac.getBean("myEventDAO"); System.out.println("New user..."); User user = new User(); user.setName("test"); Event event1 = new Event(); event1.setName("Birthday1"); event1.setUser(user); Event event2 = new Event(); event2.setName("Birthday2"); event2.setUser(user); udao.saveUser(user); edao.saveEvent(event1); edao.saveEvent(event2); List users = udao.listUserWithEvent(); System.out.println("Events for users"); for (User u : users) { System.out.println(u.getId() + ":" + u.getName() + " --"); for (Event e : u.getEvents()) { System.out.println("\t" + e.getId() + ":" + e.getName()); } } ((ConfigurableApplicationContext)ac).close(); } } and here is the Exception I get: 1621 [main] ERROR org.hibernate.LazyInitializationException - failed to lazily initialize a collection of role: data.model.User.events, no session or session was closed org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: data.model.User.events, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:380) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:372) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:119) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at data.dao.impl.UserDaoImpl.listUserWithEvent(UserDaoImpl.java:38) at HibernateTest.main(HibernateTest.java:44) Exception in thread "main" org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: data.model.User.events, no session or session was closed at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationException(AbstractPersistentCollection.java:380) at org.hibernate.collection.AbstractPersistentCollection.throwLazyInitializationExceptionIfNotConnected(AbstractPersistentCollection.java:372) at org.hibernate.collection.AbstractPersistentCollection.readSize(AbstractPersistentCollection.java:119) at org.hibernate.collection.PersistentBag.size(PersistentBag.java:248) at data.dao.impl.UserDaoImpl.listUserWithEvent(UserDaoImpl.java:38) at HibernateTest.main(HibernateTest.java:44) Things I tried but did not work: assign a threadScope and using beanfactory (I used "request" or "thread" - no difference noticed): // scope stuff Scope threadScope = new SimpleThreadScope(); ConfigurableListableBeanFactory beanFactory = ac.getBeanFactory(); beanFactory.registerScope("request", threadScope); ac.refresh(); ... Setting up a transaction by getting the session object from the deo: ... Transaction tx = ((UserDaoImpl)udao).getSession().beginTransaction(); tx.begin(); users = udao.listUserWithEvent(); ... getting a transaction within the listUserWithEvent() public List listUserWithEvent() { SessionFactory sf = hibernateTemplate.getSessionFactory(); Session s = sf.openSession(); Transaction tx = s.beginTransaction(); tx.begin(); List users = hibernateTemplate.find("from User"); for (User user : users) { System.out.println("LIST : " + user.getName() + ":"); user.getEvents().size(); } tx.commit(); return users; } I am really out of ideas by now. Also, using the listUser or listEvent just work fine.

Read the article

Error accessing a Web Service with SSL

- by Elie

I have a program that is supposed to send a file to a web service, which requires an SSL connection. I run the program as follows: SET JAVA_HOME=C:\Program Files\Java\jre1.6.0_07 SET com.ibm.SSL.ConfigURL=ssl.client.props "%JAVA_HOME%\bin\java" -cp ".;Test.jar" ca.mypackage.Main This was works fine, but when I change the first line to SET JAVA_HOME=C:\Program Files\IBM\SDP\runtimes\base_v7\java\jre I get the following error: com.sun.xml.internal.ws.client.ClientTransportException: HTTP transport error: java.net.SocketException: java.lang.ClassNotFoundException: Cannot find the specified class com.ibm.websphere.ssl.protocol.SSLSocketFactory at com.sun.xml.internal.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:119) at com.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:140) at com.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:86) at com.sun.xml.internal.ws.api.pipe.Fiber.__doRun(Fiber.java:593) at com.sun.xml.internal.ws.api.pipe.Fiber._doRun(Fiber.java:552) at com.sun.xml.internal.ws.api.pipe.Fiber.doRun(Fiber.java:537) at com.sun.xml.internal.ws.api.pipe.Fiber.runSync(Fiber.java:434) at com.sun.xml.internal.ws.client.Stub.process(Stub.java:247) at com.sun.xml.internal.ws.client.sei.SEIStub.doProcess(SEIStub.java:132) at com.sun.xml.internal.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:242) at com.sun.xml.internal.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:222) at com.sun.xml.internal.ws.client.sei.SEIStub.invoke(SEIStub.java:115) at $Proxy26.fileSubmit(Unknown Source) at com.testing.TestingSoapProxy.fileSubmit(TestingSoapProxy.java:81) at ca.mypackage.Main.main(Main.java:63) Caused by: java.net.SocketException: java.lang.ClassNotFoundException: Cannot find the specified class com.ibm.websphere.ssl.protocol.SSLSocketFactory at javax.net.ssl.DefaultSSLSocketFactory.a(SSLSocketFactory.java:7) at javax.net.ssl.DefaultSSLSocketFactory.createSocket(SSLSocketFactory.java:1) at com.ibm.net.ssl.www2.protocol.https.c.afterConnect(c.java:110) at com.ibm.net.ssl.www2.protocol.https.d.connect(d.java:14) at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:902) at com.ibm.net.ssl.www2.protocol.https.b.getOutputStream(b.java:86) at com.sun.xml.internal.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:107) ... 14 more Caused by: java.lang.ClassNotFoundException: Cannot find the specified class com.ibm.websphere.ssl.protocol.SSLSocketFactory at javax.net.ssl.SSLJsseUtil.b(SSLJsseUtil.java:20) at javax.net.ssl.SSLSocketFactory.getDefault(SSLSocketFactory.java:36) at javax.net.ssl.HttpsURLConnection.getDefaultSSLSocketFactory(HttpsURLConnection.java:16) at javax.net.ssl.HttpsURLConnection.<init>(HttpsURLConnection.java:36) at com.ibm.net.ssl.www2.protocol.https.b.<init>(b.java:1) at com.ibm.net.ssl.www2.protocol.https.Handler.openConnection(Handler.java:11) at java.net.URL.openConnection(URL.java:995) at com.sun.xml.internal.ws.api.EndpointAddress.openConnection(EndpointAddress.java:206) at com.sun.xml.internal.ws.transport.http.client.HttpClientTransport.createHttpConnection(HttpClientTransport.java:277) at com.sun.xml.internal.ws.transport.http.client.HttpClientTransport.getOutput(HttpClientTransport.java:103) ... 14 more So it seems that this problem would be related to the JRE I'm using, but what doesn't seem to make sense is that the non-IBM JRE works fine, but the IBM JRE does not. Any ideas, or suggestions?

Read the article

Could not synchronize database state with session

- by user359427

Hello all, I'm having trouble trying to persist an entity which ID is a generated value. This entity (A), at persistence time, has to persist in cascade another entity(B). The relationship within A and B is OneToMany, and the property related in B is part of a composite key. I'm using Eclipse, JBOSS Runtime, JPA/Hibernate Here is my code: Entity A: @Entity public class Cambios implements Serializable { private static final long serialVersionUID = 1L; @SequenceGenerator(name="CAMBIOS_GEN",sequenceName="CAMBIOS_SEQ",allocationSize=1) @Id @GeneratedValue(strategy=GenerationType.SEQUENCE, generator="CAMBIOS_GEN") @Column(name="ID_CAMBIO") private Long idCambio; //bi-directional many-to-one association to ObjetosCambio @OneToMany(cascade={CascadeType.PERSIST},mappedBy="cambios") private List<ObjetosCambio> objetosCambioList; public Cambios() { } ... } Entity B: @Entity @Table(name="OBJETOS_CAMBIO") public class ObjetosCambio implements Serializable { private static final long serialVersionUID = 1L; @EmbeddedId private ObjetosCambioPK id; //bi-directional many-to-one association to Cambios @ManyToOne @JoinColumn(name="ID_CAMBIO", insertable=false, updatable=false) private Cambios cambios; //bi-directional many-to-one association to Objetos @ManyToOne @JoinColumn(name="ID_OBJETO", insertable=false, updatable=false) private Objetos objetos; public ObjetosCambio() { } ... Entity B PK: @Embeddable public class ObjetosCambioPK implements Serializable { //default serial version id, required for serializable classes. private static final long serialVersionUID = 1L; @Column(name="ID_OBJETO") private Long idObjeto; @Column(name="ID_CAMBIO") private Long idCambio; public ObjetosCambioPK() { } Client: public String generarCambio(){ ServiceLocator serviceLocator = null; try { serviceLocator = serviceLocator.getInstance(); FachadaLocal tcLocal; tcLocal = (FachadaLocal)serviceLocator.getFacadeService("java:comp/env/negocio/Fachada"); Cambios cambio = new Cambios(); Iterator it = objetosLocal.iterator(); //OBJETOSLOCAL IS ALREADY POPULATED OUTSIDE OF THIS METHOD List<ObjetosCambio> ocList = new ArrayList(); while (it.hasNext()){ Objetos objeto = (Objetos)it.next(); ObjetosCambio objetosCambio = new ObjetosCambio(); objetosCambio.setCambios(cambio); //AT THIS TIME THIS "CAMBIO" DOES NOT HAVE ITS ID, ITS SUPPOSED TO BE GENERATED AT PERSISTENCE TIME ObjetosCambioPK ocPK = new ObjetosCambioPK(); ocPK.setIdObjeto(objeto.getIdObjeto()); objetosCambio.setId(ocPK); ocList.add(objetosCambio); } cambio.setObjetosCambioList(ocList); tcLocal.persistEntity(cambio); return "exito"; } catch (NamingException e) { // TODO e.printStackTrace(); } return null; } ERROR: 15:23:25,717 WARN [JDBCExceptionReporter] SQL Error: 1400, SQLState: 23000 15:23:25,717 ERROR [JDBCExceptionReporter] ORA-01400: no se puede realizar una inserción NULL en ("CDC"."OBJETOS_CAMBIO"."ID_CAMBIO") 15:23:25,717 WARN [JDBCExceptionReporter] SQL Error: 1400, SQLState: 23000 15:23:25,717 ERROR [JDBCExceptionReporter] ORA-01400: no se puede realizar una inserción NULL en ("CDC"."OBJETOS_CAMBIO"."ID_CAMBIO") 15:23:25,717 ERROR [AbstractFlushingEventListener] Could not synchronize database state with session org.hibernate.exception.ConstraintViolationException: Could not execute JDBC batch update at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:94) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:275) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:266) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:167) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:321) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:50) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1027) at org.hibernate.impl.SessionImpl.managedFlush(SessionImpl.java:365) at org.hibernate.ejb.AbstractEntityManagerImpl$1.beforeCompletion(AbstractEntityManagerImpl.java:504) at com.arjuna.ats.internal.jta.resources.arjunacore.SynchronizationImple.beforeCompletion(SynchronizationImple.java:101) at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.beforeCompletion(TwoPhaseCoordinator.java:269) at com.arjuna.ats.arjuna.coordinator.TwoPhaseCoordinator.end(TwoPhaseCoordinator.java:89) at com.arjuna.ats.arjuna.AtomicAction.commit(AtomicAction.java:177) at com.arjuna.ats.internal.jta.transaction.arjunacore.TransactionImple.commitAndDisassociate(TransactionImple.java:1423) at com.arjuna.ats.internal.jta.transaction.arjunacore.BaseTransaction.commit(BaseTransaction.java:137) at com.arjuna.ats.jbossatx.BaseTransactionManagerDelegate.commit(BaseTransactionManagerDelegate.java:75) at org.jboss.aspects.tx.TxPolicy.endTransaction(TxPolicy.java:170) at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:87) at org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:190) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.aspects.tx.TxPropagationInterceptor.invoke(TxPropagationInterceptor.java:76) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.ejb3.tx.NullInterceptor.invoke(NullInterceptor.java:42) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.ejb3.security.Ejb3AuthenticationInterceptorv2.invoke(Ejb3AuthenticationInterceptorv2.java:186) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.ejb3.ENCPropagationInterceptor.invoke(ENCPropagationInterceptor.java:41) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.ejb3.BlockContainerShutdownInterceptor.invoke(BlockContainerShutdownInterceptor.java:67) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.aspects.currentinvocation.CurrentInvocationInterceptor.invoke(CurrentInvocationInterceptor.java:67) at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:102) at org.jboss.ejb3.session.SessionSpecContainer.invoke(SessionSpecContainer.java:176) at org.jboss.ejb3.session.SessionSpecContainer.invoke(SessionSpecContainer.java:216) at org.jboss.ejb3.proxy.impl.handler.session.SessionProxyInvocationHandlerBase.invoke(SessionProxyInvocationHandlerBase.java:207) at org.jboss.ejb3.proxy.impl.handler.session.SessionProxyInvocationHandlerBase.invoke(SessionProxyInvocationHandlerBase.java:164) at $Proxy298.persistEntity(Unknown Source) at backing.SolicitudCambio.generarCambio(SolicitudCambio.java:521) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92) at javax.faces.component.UICommand.broadcast(UICommand.java:332) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:301) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126) at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Unknown Source) Caused by: java.sql.BatchUpdateException: ORA-01400: no se puede realizar una inserción NULL en ("CDC"."OBJETOS_CAMBIO"."ID_CAMBIO") Thanks in advance! JM.-

Read the article

Committed JDO writes do not apply on local GAE HRD, or possibly reused transaction

- by eeeeaaii

I'm using JDO 2.3 on app engine. I was using the Master/Slave datastore for local testing and recently switched over to using the HRD datastore for local testing, and parts of my app are breaking (which is to be expected). One part of the app that's breaking is where it sends a lot of writes quickly - that is because of the 1-second limit thing, it's failing with a concurrent modification exception. Okay, so that's also to be expected, so I have the browser retry the writes again later when they fail (maybe not the best hack but I'm just trying to get it working quickly). But a weird thing is happening. Some of the writes which should be succeeding (the ones that DON'T get the concurrent modification exception) are also failing, even though the commit phase completes and the request returns my success code. I can see from the log that the retried requests are working okay, but these other requests that seem to have committed on the first try are, I guess, never "applied." But from what I read about the Apply phase, writing again to that same entity should force the apply... but it doesn't. Code follows. Some things to note: I am attempting to use automatic JDO caching. So this is where JDO uses memcache under the covers. This doesn't actually work unless you wrap everything in a transaction. all the requests are doing is reading a string out of an entity, modifying part of the string, and saving that string back to the entity. If these requests weren't in transactions, you'd of course have the "dirty read" problem. But with transactions, isolation is supposed to be at the level of "serializable" so I don't see what's happening here. the entity being modified is a root entity (not in a group) I have cross-group transactions enabled Another weird thing is happening. If the concurrent modification thing happens, and I subsequently edit more than 5 more entities (this is the max for cross-group transactions), then nothing happens right away, but when I stop and restart the server I get "IllegalArgumentException: operating on too many entity groups in a single transaction". Could it be possible that the PMF is returning the same PersistenceManager every time, or the PM is reusing the same transaction every time? I don't see how I could possibly get the above error otherwise. The code inside the transaction just edits one root entity. I can't think of any other way that GAE would give me the "too many entity groups" error. The relevant code (this is a simplified version) PersistenceManager pm = PMF.getManager(); Transaction tx = pm.currentTransaction(); String responsetext = ""; try { tx.begin(); // I have extra calls to "makePersistent" because I found that relying // on pm.close didn't always write the objects to cache, maybe that // was only a DataNucleus 1.x issue though Key userkey = obtainUserKeyFromCookie(); User u = pm.getObjectById(User.class, userkey); pm.makePersistent(u); // to make sure it gets cached for next time Key mapkey = obtainMapKeyFromQueryString(); // this is NOT a java.util.Map, just FYI Map currentmap = pm.getObjectById(Map.class, mapkey); Text mapData = currentmap.getMapData(); // mapData is JSON stored in the entity Text newMapData = parseModifyAndReturn(mapData); // transform the map currentmap.setMapData(newMapData); // mutate the Map object pm.makePersistent(currentmap); // make sure to persist so there is a cache hit tx.commit(); responsetext = "OK"; } catch (JDOCanRetryException jdoe) { // log jdoe responsetext = "RETRY"; } catch (Exception e) { // log e responsetext = "ERROR"; } finally { if (tx.isActive()) { tx.rollback(); } pm.close(); } resp.getWriter().println(responsetext); EDIT: so I have verified that it fails after exactly 5 transactions. Here's what I do: I create a Foo (root entity), do a bunch of concurrent operations on that Foo, and some fail and get retried, and some commit but don't apply (as described above). Then, I start creating more Foos, and do a few operations on those new Foos. If I only create four Foos, stopping and restarting app engine does NOT give me the IllegalArgumentException. However if I create five Foos (which is the limit for cross-group transactions), then when I stop and restart app engine, I do get the exception. So it seems that somehow these new Foos I am creating are counting toward the limit of 5 max entities per transaction, even though they are supposed to be handled by separate transactions. It's as if a transaction is still open and is being reused by the servlet when it handles the new requests for the 2nd through 5th Foos. EDIT2: it looks like the IllegalArgument thing is independent of the other bug. In other words, it always happens when I create five Foos, even if I don't get the concurrent modification exception. I don't know if it's a symptom of the same problem or if it's unrelated. EDIT3: I found out what was causing the (unrelated) IllegalArgumentException, it was a dumb mistake on my part. But the other issue is still happening. EDIT4: added pseudocode for the datastore access EDIT5: I am pretty sure I know why this is happening, but I will still award the bounty to anyone who can confirm it. Basically, I think the problem is that transactions are not really implemented in the local version of the datastore. References: https://groups.google.com/forum/?fromgroups=#!topic/google-appengine-java/gVMS1dFSpcU https://groups.google.com/forum/?fromgroups=#!topic/google-appengine-java/deGasFdIO-M https://groups.google.com/forum/?hl=en&fromgroups=#!msg/google-appengine-java/4YuNb6TVD6I/gSttMmHYwo0J Because transactions are not implemented, rollback is essentially a no-op. Therefore, I get a dirty read when two transactions try to modify the record at the same time. In other words, A reads the data and B reads the data at the same time. A attempts to modify the data, and B attempts to modify a different part of the data. A writes to the datastore, then B writes, obliterating A's changes. Then B is "rolled back" by app engine, but since rollbacks are a no-op when running on the local datastore, B's changes stay, and A's do not. Meanwhile, since B is the thread that threw the exception, the client retries B, but does not retry A (since A was supposedly the transaction that succeeded).

Read the article

error initializing multiple configuration files

- by lurscher

Hi, during initialization startup on tomcat, the configurations are: 1) a webapp/WEB-INF/web.xml that imports yummy-servlet.xml in contextConfigLocation (although i'm aware that is not required since the servlet-name is yummy it will try to load yummy-servlet.xml by default) 2) a webapp/WEB-INF/yummy-servlet.xml that imports a spring/applicationContext-hibernate.xml file 3) a webapp/WEB-INF/spring/applicationContext-hibernate.xml that imports a applicationContext-dataSource.xml file 4) a webapp/WEB-INF/spring/applicationContext-dataSource.xml i'm getting errors about Failed to import bean definitions from relative location, but the stack trace is not very explicit about exactly what is the problem, i've been looking at these since yesterday and i really don't see any problem on the files my web.xml: <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5"> <display-name>hello-spring3-RC1</display-name> <context-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/yummy-servlet.xml</param-value> </context-param>   <context-param> <param-name>log4jConfigLocation</param-name> <param-value>classpath:log4j.properties</param-value> </context-param> <listener> <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class> </listener> <servlet> <servlet-name>yummy</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>yummy</servlet-name> <url-pattern>*.html</url-pattern> </servlet-mapping> <welcome-file-list> <welcome-file>index.html</welcome-file> </welcome-file-list> </web-app> my yummy-servlet.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd"> <import resource="spring/applicationContext-hibernate.xml"/> <context:component-scan base-package="com.mine.web.controllers"/> <bean id="jspViewResolver" class="org.springframework.web.servlet.view.InternalResourceViewResolver"> <property name="viewClass" value="org.springframework.web.servlet.view.JstlView"/> <property name="prefix" value="/WEB-INF/jsp/"/> <property name="suffix" value=".jsp"/> </bean> </beans> my applicationContext-hibernate.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx.xsd">  <import resource="applicationContext-dataSource.xml"/>   <context:property-placeholder location="classpath:jdbc.properties"/> <context:property-placeholder location="classpath:hibernate.properties"/>  <bean id="sessionFactory" class="org.springframework.orm.hibernate3.LocalSessionFactoryBean" p:dataSource-ref="dataSource" p:mappingResources="hello.hbm.xml"> <property name="hibernateProperties"> <props> <prop key="hibernate.dialect">${hibernate.dialect}</prop> <prop key="hibernate.show_sql">${hibernate.show_sql}</prop> <prop key="hibernate.generate_statistics">${hibernate.generate_statistics}</prop> </props> </property> <property name="eventListeners"> <map> <entry key="merge"> <bean class="org.springframework.orm.hibernate3.support.IdTransferringMergeEventListener"/> </entry> </map> </property> </bean> <bean id="hibernateTemplate" class="org.springframework.orm.hibernate3.HibernateTemplate"> <property name="sessionFactory" ref="sessionFactory" /> </bean>  <bean id="transactionManager" class="org.springframework.orm.hibernate3.HibernateTransactionManager" p:sessionFactory-ref="sessionFactory"/>   <context:annotation-config/>  <tx:annotation-driven transaction-manager="transactionManager"/> <bean id="EntityManager" class="com.mine.persistence.hibernate.HibernateHelloWorldDao"/> </beans> and my applicationContext-dataSource.xml: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xmlns:jdbc="http://www.springframework.org/schema/jdbc" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context.xsd http://www.springframework.org/schema/jdbc http://www.springframework.org/schema/jdbc/spring-jdbc.xsd">   <context:property-placeholder location="classpath:jdbc.properties"/> <context:property-placeholder location="classpath:hibernate.properties"/>   <bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource" destroy-method="close"> <property name="driverClass" value="${jdbc.driverClassName}"/> <property name="jdbcUrl" value="${jdbc.url}"/> <property name="user" value="${jdbc.username}"/> <property name="password" value="${jdbc.password}"/> <property name="initialPoolSize" value="${hibernate.c3p0.min_size}"/> <property name="minPoolSize" value="${hibernate.c3p0.min_size}"/> <property name="maxPoolSize" value="${jdbc.maxconn}"/> <property name="idleConnectionTestPeriod" value="150"/> <property name="acquireIncrement" value="1"/> <property name="maxStatements" value="0"/> <property name="numHelperThreads" value="5"/> </bean> </beans> and this is the stack trace: 2010-06-13 12:16:33,526 INFO [org.springframework.web.context.ContextLoader] - < Root WebApplicationContext: initialization started> 2010-06-13 12:16:33,707 INFO [org.springframework.web.context.support.XmlWebAppl icationContext] - <Refreshing Root WebApplicationContext: startup date [Sun Jun 13 12:16:33 GMT-05:00 2010]; root of context hierarchy> 2010-06-13 12:16:34,086 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from ServletContext resource [/WEB- INF/yummy-servlet.xml]> 2010-06-13 12:16:34,378 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from URL [jndi:/localhost/protoweb/ WEB-INF/spring/applicationContext-hibernate.xml]> 2010-06-13 12:16:34,473 INFO [org.springframework.beans.factory.xml.XmlBeanDefin itionReader] - <Loading XML bean definitions from URL [jndi:/localhost/protoweb/ WEB-INF/spring/applicationContext-dataSource.xml]> 2010-06-13 12:16:35,098 ERROR [org.springframework.web.context.ContextLoader] - <Context initialization failed> org.springframework.beans.factory.parsing.BeanDefinitionParsingException: Configuration problem: Failed to import bean definitions from relative location [spring/applicationContext-hibernate.xml] Offending resource: ServletContext resource [/WEB-INF/yummy-servlet.xml]; nested exception is org.springframework.beans.factory.BeanDefinitionStoreException: Un expected exception parsing XML document from URL [jndi:/localhost/protoweb/WEB-INF/spring/applicationContext-hibernate.xml]; nested exception is java.lang.NoSuchMethodError: org.springframework.beans.MutablePropertyValues.add(Ljava/lang/Str ing;Ljava/lang/Object;)Lorg/springframework/beans/MutablePropertyValues; at org.springframework.beans.factory.parsing.FailFastProblemReporter.err or(FailFastProblemReporter.java:68) at org.springframework.beans.factory.parsing.ReaderContext.error(ReaderC ontext.java:85) at org.springframework.beans.factory.parsing.ReaderContext.error(ReaderC ontext.java:76) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.importBeanDefinitionResource(DefaultBeanDefinitionDocumentReader.java:197) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseDefaultElement(DefaultBeanDefinitionDocumentReader.java:146) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:131) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:91) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registe rBeanDefinitions(XmlBeanDefinitionReader.java:475) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:372) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:316) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:284) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:149) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:125) at org.springframework.web.context.support.XmlWebApplicationContext.load BeanDefinitions(XmlWebApplicationContext.java:93) at org.springframework.context.support.AbstractRefreshableApplicationCon text.refreshBeanFactory(AbstractRefreshableApplicationContext.java:127) at org.springframework.context.support.AbstractApplicationContext.obtain FreshBeanFactory(AbstractApplicationContext.java:429) at org.springframework.context.support.AbstractApplicationContext.refres h(AbstractApplicationContext.java:356) at org.springframework.web.context.ContextLoader.createWebApplicationCon text(ContextLoader.java:270) at org.springframework.web.context.ContextLoader.initWebApplicationConte xt(ContextLoader.java:197) at org.springframework.web.context.ContextLoaderListener.contextInitiali zed(ContextLoaderListener.java:47) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3972) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 467) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:791) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:77 1) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:546) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:905) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:740 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:500 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1277) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :321) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:119) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053) at org.apache.catalina.core.StandardHost.start(StandardHost.java:785) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:5 19) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: org.springframework.beans.factory.BeanDefinitionStoreException: Unexp ected exception parsing XML document from URL [jndi:/localhost/protoweb/WEB-INF/ spring/applicationContext-hibernate.xml]; nested exception is java.lang.NoSuchMe thodError: org.springframework.beans.MutablePropertyValues.add(Ljava/lang/String ;Ljava/lang/Object;)Lorg/springframework/beans/MutablePropertyValues; at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:394) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:316) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.loadBea nDefinitions(XmlBeanDefinitionReader.java:284) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:143) at org.springframework.beans.factory.support.AbstractBeanDefinitionReade r.loadBeanDefinitions(AbstractBeanDefinitionReader.java:178) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.importBeanDefinitionResource(DefaultBeanDefinitionDocumentReader.java:187) ... 42 more Caused by: java.lang.NoSuchMethodError: org.springframework.beans.MutablePropert yValues.add(Ljava/lang/String;Ljava/lang/Object;)Lorg/springframework/beans/Muta blePropertyValues; at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.registerTransactionManager(AnnotationDrivenBeanDefinitionParser.java:95) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.access$0(AnnotationDrivenBeanDefinitionParser.java:94) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser$AopAutoProxyConfigurer.configureAutoProxyCreator(AnnotationDrivenBeanDefi nitionParser.java:121) at org.springframework.transaction.config.AnnotationDrivenBeanDefinition Parser.parse(AnnotationDrivenBeanDefinitionParser.java:79) at org.springframework.beans.factory.xml.NamespaceHandlerSupport.parse(N amespaceHandlerSupport.java:72) at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.pa rseCustomElement(BeanDefinitionParserDelegate.java:1327) at org.springframework.beans.factory.xml.BeanDefinitionParserDelegate.pa rseCustomElement(BeanDefinitionParserDelegate.java:1317) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.parseBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:134) at org.springframework.beans.factory.xml.DefaultBeanDefinitionDocumentRe ader.registerBeanDefinitions(DefaultBeanDefinitionDocumentReader.java:91) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.registe rBeanDefinitions(XmlBeanDefinitionReader.java:475) at org.springframework.beans.factory.xml.XmlBeanDefinitionReader.doLoadB eanDefinitions(XmlBeanDefinitionReader.java:372) ... 47 more 06/13/2010 12:16:35 PM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart

Read the article

Removing Duplicate Data From SQL Query Output For Display On A Web Page [migrated]

- by doubleJ

I had asked a similar question on stackoverflow but didn't really get anywhere. This page shows the output that I'm currently getting from my MSSQL server. I have a table of venue information (name, address, etc...) that our events happen on. Separately, I have a table of the actual events that are scheduled (an event may happen multiple times in one day and/or over multiple days). I join those tables with this query: <?php try { $dbh = new PDO("sqlsrv:Server=localhost;Database=Sermons", "", ""); $dbh->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); $sql = "SELECT TOP (100) PERCENT dbo.TblSermon.Day, dbo.TblSermon.Date, dbo.TblSermon.Time, dbo.TblSermon.Speaker, dbo.TblSermon.Series, dbo.TblSermon.Sarasota, dbo.TblSermon.NonFlc, dbo.TblJoinSermonLocation.MeetingName, dbo.TblLocation.Location, dbo.TblLocation.Pastors, dbo.TblLocation.Address, dbo.TblLocation.City, dbo.TblLocation.State, dbo.TblLocation.Zip, dbo.TblLocation.Country, dbo.TblLocation.Phone, dbo.TblLocation.Email, dbo.TblLocation.WebAddress FROM dbo.TblLocation RIGHT OUTER JOIN dbo.TblJoinSermonLocation ON dbo.TblLocation.ID = dbo.TblJoinSermonLocation.Location RIGHT OUTER JOIN dbo.TblSermon ON dbo.TblJoinSermonLocation.Sermon = dbo.TblSermon.ID WHERE (dbo.TblSermon.Date >= { fn NOW() }) ORDER BY dbo.TblSermon.Date, dbo.TblSermon.Time"; $stmt = $dbh->prepare($sql); $stmt->execute(); $stmt->setFetchMode(PDO::FETCH_ASSOC); foreach ($stmt as $row) { echo "<pre>"; print_r($row); echo "</pre>"; } unset($row); $dbh = null; } catch(PDOException $e) { echo $e->getMessage(); } ?> So, as it loops through the query results, it creates an array for each record and ends up like this: Array ( [Day] => Tuesday [Date] => 2012-10-30 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => The Ark Church [Pastors] => Alan & Joy Clayton [Address] => 450 Humble Tank Rd. [City] => Conroe [State] => TX [Zip] => 77305.0 [Phone] => (936) 756-1988 [Email] => [email protected] [WebAddress] => http://www.thearkchurch.org ) Array ( [Day] => Wednesday [Date] => 2012-10-31 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => The Ark Church [Pastors] => Alan & Joy Clayton [Address] => 450 Humble Tank Rd. [City] => Conroe [State] => TX [Zip] => 77305.0 [Phone] => (936) 756-1988 [Email] => [email protected] [WebAddress] => http://www.thearkchurch.org ) Array ( [Day] => Tuesday [Date] => 2012-11-06 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => Fellowship Of Faith Christian Center [Pastors] => Michael & Joan Kalstrup [Address] => 18999 Hwy. 59 [City] => Oakland [State] => IA [Zip] => 51560.0 [Phone] => (712) 482-3455 [Email] => [email protected] [WebAddress] => http://www.fellowshipoffaith.cc ) Array ( [Day] => Wednesday [Date] => 2012-11-14 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => Faith Family Church [Pastors] => Michael & Barbara Cameneti [Address] => 8200 Freedom Ave NW [City] => Canton [State] => OH [Zip] => 44720.0 [Phone] => (330) 492-0925 [Email] => [WebAddress] => http://www.myfaithfamily.com ) As you can see, The Ark Church and its associated contact information is duplicated, so when I work with those arrays and output them to the page, I see a bunch of duplicate content. I'd like to remove the duplicate information so that I get results similar to this: The Ark Church Alan & Joy Clayton 450 Humble Tank Rd. Conroe, TX 77305 (936) 756-1988 [email protected] http://www.thearkchurch.org Meetings: Tuesday, 2012-10-30 07:00 PM Wednesday, 2012-10-31 07:00 PM Fellowship Of Faith Christian Center Michael & Joan Kalstrup 18999 Hwy. 59 Oakland, IA 51560 (712) 482-3455 [email protected] http://www.fellowshipoffaith.cc Meetings: Tuesday, 2012-11-06 07:00 PM Faith Family Church Michael & Barbara Cameneti 8200 Freedom Ave NW Canton, OH 44720 (330) 492-0925 http://www.myfaithfamily.com Meetings: Wednesday, 2012-11-14 07:00 PM It doesn't necessarily have to end up like that (I'm not looking for code specific for these results, but a concept of how to not show the duplicated information). I'm assuming that an additional foreach or while will do it, but I haven't figured out any logic that says <?php if ($location == $previouslocation) echo ""; ?>.

Read the article

2D isometric picking

- by Bikonja

I'm trying to implement picking in my isometric 2D game, however, I am failing. First of all, I've searched for a solution and came to several, different equations and even a solution using matrices. I tried implementing every single one, but none of them seem to work for me. The idea is that I have an array of tiles, with each tile having it's x and y coordinates specified (in this simplified example it's by it's position in the array). I'm thinking that the tile (0, 0) should be on the left, (max, 0) on top, (0, max) on the bottom and (max, max) on the right. I came up with this loop for drawing, which googling seems to have verified as the correct solution, as has the rendered scene (ofcourse, it could still be wrong, also, forgive the messy names and stuff, it's just a WIP proof of concept code) // Draw code int col = 0; int row = 0; for (int i = 0; i < nrOfTiles; ++i) { // XOffset and YOffset are currently hardcoded values, but will represent camera offset combined with HUD offset Point tile = IsoToScreen(col, row, TileWidth / 2, TileHeight / 2, XOffset, YOffset); int x = tile.X; int y = tile.Y; spriteBatch.Draw(_tiles[i], new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); col++; if (col >= Columns) // Columns is the number of tiles in a single row { col = 0; row++; } } // Get selection overlay location (removed check if selection exists for simplicity sake) Point tile = IsoToScreen(_selectedTile.X, _selectedTile.Y, TileWidth / 2, TileHeight / 2, XOffset, YOffset); spriteBatch.Draw(_selectionTexture, new Rectangle(tile.X, tile.Y, TileWidth, TileHeight), Color.White); // End of draw code public Point IsoToScreen(int isoX, int isoY, int widthHalf, int heightHalf, int xOffset, int yOffset) { Point newPoint = new Point(); newPoint.X = widthHalf * (isoX + isoY) + xOffset; newPoint.Y = heightHalf * (-isoX + isoY) + yOffset; return newPoint; } This code draws the tiles correctly. Now I wanted to do picking to select the tiles. For this, I tried coming up with equations of my own (including reversing the drawing equation) and I tried multiple solutions I found on the internet and none of these solutions worked. Trying out lots of solutions, I came upon one that didn't work, but it seemed like an axis was just inverted. I fiddled around with the equations and somehow managed to get it to actually work (but have no idea why it works), but while it's close, it still doesn't work. I'm not really sure how to describe the behaviour, but it changes the selection at wrong places, while being fairly close (sometimes spot on, sometimes a tile off, I believe never more off than the adjacent tile). This is the code I have for getting which tile coordinates are selected: public Point? ScreenToIso(int screenX, int screenY, int tileHeight, int offsetX, int offsetY) { Point? newPoint = null; int nX = -1; int nY = -1; int tX = screenX - offsetX; int tY = screenY - offsetY; nX = -(tY - tX / 2) / tileHeight; nY = (tY + tX / 2) / tileHeight; newPoint = new Point(nX, nY); return newPoint; } I have no idea why this code is so close, especially considering it doesn't even use the tile width and all my attempts to write an equation myself or use a solution I googled failed. Also, I don't think this code accounts for the area outside the "tile" (the transparent part of the tile image), for which I intend to add a color map, but even if that's true, it's not the problem as the selection sometimes switches on approx 25% or 75% of width or height. I'm thinking I've stumbled upon a wrong path and need to backtrack, but at this point, I'm not sure what to do so I hope someone can shed some light on my error or point me to the right path. It may be worth mentioning that my goal is to not only pick the tile. Each main tile will be divided into 5x5 smaller tiles which won't be drawn seperately from the whole main tile, but they will need to be picked out. I think a color map of a main tile with different colors for different coordinates within the main tile should take care of that though, which would fall within using a color map for the main tile (for the transparent parts of the tile, meaning parts that possibly belong to other tiles).

Read the article

New OFM versions released SOA Suite 11.1.1.4 & BPM 11.1.1.4 & JDeveloper 11.1.1.4 WebLogic on JRockit 10.3.4 feedback from the community

- by Jürgen Kress

Oracle SOA Suite 11g Installations This is the latest release of the Oracle SOA Suite 11g. Please see the Documentation tab for Release Notes, Installation Guides and other release specific information. Please also see the List of New Features and Samples provided for this release. Release 11gR1 (11.1.1.4.0) Microsoft Windows (32-bit JVM) Linux (32-bit JVM) Generic Oracle JDeveloper 11g Rel 1 (11.1.1.x) (JDeveloper + ADF) Integrated development environment certified on Windows, Linux, and Macintosh. License is free (read the Pricing FAQ). Studio Edition for Windows (1.2 GB) | Studio Edition for Linux (1.3 GB) | See All See Additional Development Tools Oracle WebLogic Server 11g Rel 1 (10.3.4) Installers The WebLogic Server installers include Oracle Coherence and Oracle Enterprise Pack for Eclipse and supports development with other Fusion Middleware products . The zip includes WebLogic Server only and is intended for WebLogic Server development only. Linux x86 (1.1 GB) | Windows x86 (1 GB) Zip for Windows x86, Linux x86, Mac OS X (316 MB) | See All Oracle WebLogic Server 11gR1 (10.3.4) on JRockit Virtual Edition Download For additional downloads please visit the Oracle Fusion Middleware Products Update Center Share your feedback with the @soacommunity on twitter SOASimone Simone Geib SOA Suite 11gR1 (11.1.1.4.0) has just been released: http://www.oracle.com/technetwork/middleware/soasuite/downloads/index.html gschmutz gschmutz My new blog post: WebLogic Server, JDev, SOA, BPM, OSB and CEP 11.1.1.4 (PS3) available! - http://tinyurl.com/4negnpn simon_haslam Simon Haslam I'm very pleased to see WLS 10.3.4 for JRockit VE launched at the same time as the rest of PS3 http://j.mp/gl1nQm (32bit anyway) lucasjellema Lucas Jellema See http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml for PS3 extension downloads BPM, SOA Editor, WebCenter demed demed List of new features in @OracleSOA 11gR1 PS3: http://bit.ly/fVRwsP is not extremely long but huge release by # of bugs fixed. Go! biemond Edwin Biemond WebLogic 10.3.4 new features http://bit.ly/f7L1Eu Exalogic Elastic Cloud , JPA2 , Maven plugin, OWSM policies on WebLogic SCA applications JDeveloper JDeveloper & ADF JDeveloper and Oracle ADF 11g Release 1 Patch Set 3 (11.1.1.4.0): New Features and Bug Fixes http://bit.ly/feghnY simon_haslam Simon Haslam WebLogic Server 10.3.4 (i.e. 11gR1 PS3) available now too http://bit.ly/eeysZ2 JDeveloper JDeveloper & ADF Share your impressions on the new JDeveloper 11g Patchset 3 release that came out today! Download it here: http://bit.ly/dogRN8 VikasAatOracle Vikas Anand SOA Suite 11gR1PS3 is Hotpluggable ...see list of features that @Demed posted..#soa #soacommunity New versions of Oracle Fusion Middleware 11g R1 (11.1.1.4.x) include: Oracle WebLogic Server 11g R1 (10.3.4) Oracle SOA Suite 11g R1 (11.1.1.4.0) Oracle Business Process Management 11g R1 (11.1.1.4.0) Oracle Complex Event Processing 11g R1 (11.1.1.4.0) Oracle Application Integration Architecture Foundation Pack 11g R1 (11.1.1.4.0) Oracle Service Bus 11g R1 (11.1.1.4.0) Oracle Enterprise Repository 11g R1 (11.1.1.4.0) Oracle Identity Management 11g R1 (11.1.1.4.0) Oracle Enterprise Content Management 11g R1 (11.1.1.4.0) Oracle WebCenter 11g R1 (11.1.1.4.0) - coming soon Oracle Forms, Reports, Portal & Discoverer 11g R1 (11.1.1.4.0) Oracle Repository Creation Utility 11g R1 (11.1.1.4.0) Oracle JDeveloper & Application Development Runtime 11g R1 (11.1.1.4.0) Resources Download (OTN) Certification Documentation New Features in Oracle SOA Suite 11g Release 1 (11.1.1.4.0) Updated: January, 2011 Go to Oracle SOA Suite 11g Doc Introduction Oracle SOA Suite 11gR1 (11.1.1.4.0) includes both bug fixes as well as new features listed below - click on the title of each feature for more details. Downloads, documentation links and more information on the Oracle SOA Suite available on the SOA Suite OTN page and as always, we welcome your feedback on the SOA OTN forum. New in Oracle SOA Suite in this release BPEL Component BPEL 2.0 support in JDeveloper The BPEL editor in JDeveloper now generates BPEL 2.0 code and introduces several new activities. Augmented XML variables auto-initialization capabilities The XML variable auto-initialization capabilities have been enhanced to support two need additional use cases: to initialize the to-spec node if it doesn't exist during the rule and to initialize array elements. New Assign Activity dialog The new Assign Activity supports the same drag & drop paradigm used for the XSLT mapper, greatly streamlining the task of assigning multiple variables. Mediator Component Time window parameter for the resequencer This new parameter lets users initiate a best-effort resequencing based on a time window rather than a number of messages. Support for attachments in the Mediator assign dialog The Mediator assign dialog now supports attachment, enabling usage of the Mediator to transmit attachments even if source and target schemas are different. Adapters & Bindings ChunkSize property added to the File Adapter header properties The ChunkSize property of the File Adapter is now available as a header property, allowing in-process modification of the value for this property. Improved support for distributed WLS JMS topics though automatic rebalancing of listeners The JMS Adapter has been enhanced to subscribe to administrative events from WLS JMS. Based on these events, it dynamically rebalances listeners when there are changes to the members of a local or remote WLS JMS distributed destination. JDeveloper configuration wizard for custom JCA adapters A new wizard is available in JDeveloper to configure custom-built adapters Administration & Enterprise Manager Enhanced purging capabilities to manage database growth Historical instance data can now be purged using three different strategies: batch script, scheduled batch script or data partitioning. Asynchronous bulk instance deletion in Enterprise Manager Bulk deletion of instances in Enterprise Manager now executes as an asynchronous operation in Enterprise Manager, returning control to the user as soon as the action has been submitted and acknowledged. B2B Ability to schedule partner downtime This feature allows trading partners to notify each other about planned downtime and to delay delivery of messages during that period. Message sequencing B2B now supports both inbound and outbound message sequencing. Simplified BAM integration with B2B B2B ships with various pre-configured artifacts to simplify monitoring in BAM. Instance Message Java API for B2B The new instance message Java API supports programmatic access to B2B instance message data. Oracle Service Bus (OSB) Certification of the File and FTP JCA Adapters The File and FTP JCA adapters are now certified for use with Oracle Service Bus (in addition to the native transports). Security enhancements Oracle Service Bus now supports SAML 2.0 as well as the OWSM authorization policies. Check the Oracle Service Bus 11.1.1.4 Release Notes for a complete list of new features. Installation, Hot-Pluggability & Certifications Ability to run Oracle SOA Suite on IBM WebSphere Application Server Oracle SOA Suite can now be deployed on IBM WebSphere Application Server Network Deployment (ND) 7.0.11 and IBM WebSphere Application Server 7.0.11. Single JVM developer installation template Oracle SOA Suite can now be targeted to the WebLogic admin server - there is no requirement to also have a managed server. This topology is intended to minimize the memory foorprint of development environments. This is in addition to the list of supported browsers, operating systems and databases already certified in prior releases. Complex Event Processing (CEP) IDE enhancements This release introduces several enhancements to the development IDE, such as adapter wizards and event-type repository. CQL enhancements CQL enhancements include JDBC data cartridges and parametrized queries. Tracing and injecting events in the Event Processing Network (EPN) In the development environment you can now trace and inject events. Check the Oracle CEP 11.1.1.4 Release Notes for a complete list of new features. SOA Suite page on OTN For more information on SOA Specialization and the SOA Partner Community please feel free to register at www.oracle.com/goto/emea/soa (OPN account required) Blog Twitter LinkedIn Mix Forum Wiki Website Technorati Tags: SOA Suite 11.1.1.4,JDeveloper 11.1.1.4,WebLogic 10.3.4,JRockit 10.3.4,SOA Community,Oracle,OPN,SOA,Simone Geib,Guido Schmutz,Edwin Biemond,Lucas Jellema,Simon Haslam,Demed,Vikas Anand,Jürgen Kress

Read the article

Acer aspire 5735z wireless not working after upgrade to 11.10

- by Jon

I cant get my wifi card to work at all after upgrading to 11.10 Oneiric. I'm not sure where to start to fix this. Ive tried using the additional drivers tool but this shows that no additional drivers are needed. Before my upgrade I had a drivers working for the Rt2860 chipset. Any help on this would be much appreciated.... thanks Jon jon@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1d:72:ec:76:d5 inet addr:192.168.1.134 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21d:72ff:feec:76d5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7846 errors:0 dropped:0 overruns:0 frame:0 TX packets:7213 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8046624 (8.0 MB) TX bytes:1329442 (1.3 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:91 errors:0 dropped:0 overruns:0 frame:0 TX packets:91 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:34497 (34.4 KB) TX bytes:34497 (34.4 KB) Ive included by dmesg output below [ 0.428818] NET: Registered protocol family 2 [ 0.429003] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.430562] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.436614] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.437409] TCP: Hash tables configured (established 524288 bind 65536) [ 0.437412] TCP reno registered [ 0.437431] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437482] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.437678] NET: Registered protocol family 1 [ 0.437705] pci 0000:00:02.0: Boot video device [ 0.437892] PCI: CLS 64 bytes, default 64 [ 0.437916] Simple Boot Flag at 0x57 set to 0x1 [ 0.438294] audit: initializing netlink socket (disabled) [ 0.438309] type=2000 audit(1319243447.432:1): initialized [ 0.440763] Freeing initrd memory: 13416k freed [ 0.468362] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.488192] VFS: Disk quotas dquot_6.5.2 [ 0.488254] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.488888] fuse init (API version 7.16) [ 0.488985] msgmni has been set to 5890 [ 0.489381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.489413] io scheduler noop registered [ 0.489415] io scheduler deadline registered [ 0.489460] io scheduler cfq registered (default) [ 0.489583] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.489633] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.489699] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.489741] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.489800] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.489841] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.489904] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.489944] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X [ 0.490006] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.490047] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X [ 0.490126] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.490149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.490196] intel_idle: MWAIT substates: 0x1110 [ 0.490198] intel_idle: does not run on family 6 model 15 [ 0.491240] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.493473] ACPI: AC Adapter [ADP1] (on-line) [ 0.493590] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.496771] ACPI: Lid Switch [LID0] [ 0.496818] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.496823] ACPI: Sleep Button [SLPB] [ 0.496865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.496869] ACPI: Power Button [PWRF] [ 0.496900] ACPI: acpi_idle registered with cpuidle [ 0.498719] Monitor-Mwait will be used to enter C-1 state [ 0.498753] Monitor-Mwait will be used to enter C-2 state [ 0.498761] Marking TSC unstable due to TSC halts in idle [ 0.517627] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517630] ACPI: Thermal Zone [TZS0] (67 C) [ 0.524796] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.524799] ACPI: Thermal Zone [TZS1] (67 C) [ 0.524823] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.524852] ERST: Table is not found! [ 0.524948] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.680991] ACPI: Battery Slot [BAT0] (battery present) [ 0.688567] Linux agpgart interface v0.103 [ 0.688672] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.688865] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.689786] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.689912] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.691006] brd: module loaded [ 0.691510] loop: module loaded [ 0.691967] Fixed MDIO Bus: probed [ 0.691990] PPP generic driver version 2.4.2 [ 0.692065] tun: Universal TUN/TAP device driver, 1.6 [ 0.692067] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 0.692146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.692181] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.692206] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.692210] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.692255] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.692289] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.696181] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 0.696202] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xf8904800 [ 0.712014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.712131] hub 1-0:1.0: USB hub found [ 0.712136] hub 1-0:1.0: 6 ports detected [ 0.712230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.712243] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.712247] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.712287] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.712315] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.716201] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.716216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8904c00 [ 0.732014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.732130] hub 2-0:1.0: USB hub found [ 0.732135] hub 2-0:1.0: 6 ports detected [ 0.732209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.732223] uhci_hcd: USB Universal Host Controller Interface driver [ 0.732254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.732262] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.732265] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.732298] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.732325] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.732441] hub 3-0:1.0: USB hub found [ 0.732445] hub 3-0:1.0: 2 ports detected [ 0.732508] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.732514] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.732518] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.732553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.732577] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00001840 [ 0.732696] hub 4-0:1.0: USB hub found [ 0.732700] hub 4-0:1.0: 2 ports detected [ 0.732762] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 [ 0.732768] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.732772] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.732805] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.732829] uhci_hcd 0000:00:1a.2: irq 20, io base 0x00001860 [ 0.732942] hub 5-0:1.0: USB hub found [ 0.732946] hub 5-0:1.0: 2 ports detected [ 0.733007] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.733014] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.733017] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.733057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.733082] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 [ 0.733202] hub 6-0:1.0: USB hub found [ 0.733206] hub 6-0:1.0: 2 ports detected [ 0.733265] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.733273] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.733276] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.733313] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.733351] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018a0 [ 0.733466] hub 7-0:1.0: USB hub found [ 0.733470] hub 7-0:1.0: 2 ports detected [ 0.733532] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.733539] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.733542] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.733578] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.733610] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 [ 0.733730] hub 8-0:1.0: USB hub found [ 0.733736] hub 8-0:1.0: 2 ports detected [ 0.733843] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.751594] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.751605] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.751732] mousedev: PS/2 mouse device common for all mice [ 0.752670] rtc_cmos 00:08: RTC can wake from S4 [ 0.752770] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.752796] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.752907] device-mapper: uevent: version 1.0.3 [ 0.752976] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected] [ 0.753028] cpuidle: using governor ladder [ 0.753093] cpuidle: using governor menu [ 0.753096] EFI Variables Facility v0.08 2004-May-17 [ 0.753361] TCP cubic registered [ 0.753482] NET: Registered protocol family 10 [ 0.753966] NET: Registered protocol family 17 [ 0.753992] Registering the dns_resolver key type [ 0.754113] PM: Hibernation image not present or could not be loaded. [ 0.754131] registered taskstats version 1 [ 0.771553] Magic number: 15:152:507 [ 0.771667] rtc_cmos 00:08: setting system clock to 2011-10-22 00:30:48 UTC (1319243448) [ 0.772238] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.772240] EDD information not available. [ 0.774165] Freeing unused kernel memory: 984k freed [ 0.774504] Write protecting the kernel read-only data: 10240k [ 0.774755] Freeing unused kernel memory: 20k freed [ 0.775093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.779727] Freeing unused kernel memory: 1400k freed [ 0.801946] udevd[84]: starting version 173 [ 0.880950] sky2: driver version 1.28 [ 0.881046] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.881096] sky2 0000:02:00.0: setting latency timer to 64 [ 0.881197] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2 [ 0.881871] sky2 0000:02:00.0: irq 45 for MSI/MSI-X [ 0.896273] sky2 0000:02:00.0: eth0: addr 00:1d:72:ec:76:d5 [ 0.910630] ahci 0000:00:1f.2: version 3.0 [ 0.910647] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.910710] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X [ 0.910775] ahci: SSS flag set, parallel bus scan disabled [ 0.910812] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.910816] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 0.910821] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.941773] scsi0 : ahci [ 0.941954] scsi1 : ahci [ 0.942038] scsi2 : ahci [ 0.942118] scsi3 : ahci [ 0.942196] scsi4 : ahci [ 0.942268] scsi5 : ahci [ 0.942332] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 46 [ 0.942336] ata2: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904180 irq 46 [ 0.942339] ata3: DUMMY [ 0.942340] ata4: DUMMY [ 0.942344] ata5: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904300 irq 46 [ 0.942347] ata6: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904380 irq 46 [ 1.028061] usb 1-5: new high speed USB device number 2 using ehci_hcd [ 1.181775] usbcore: registered new interface driver uas [ 1.260062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.261126] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133 [ 1.261129] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.262360] ata1.00: configured for UDMA/133 [ 1.262518] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5 [ 1.262716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.262762] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.262824] sd 0:0:0:0: [sda] Write Protect is off [ 1.262827] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.262851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.287277] sda: sda1 sda2 sda3 [ 1.287693] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.580059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.581188] ata2.00: ATAPI: HL-DT-STDVDRAM GT10N, 1.00, max UDMA/100 [ 1.582663] ata2.00: configured for UDMA/100 [ 1.584162] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT10N 1.00 PQ: 0 ANSI: 5 [ 1.585821] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.585824] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.585953] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.586038] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.632061] usb 6-1: new low speed USB device number 2 using uhci_hcd [ 1.908056] ata5: SATA link down (SStatus 0 SControl 300) [ 2.228065] ata6: SATA link down (SStatus 0 SControl 300) [ 2.228955] Initializing USB Mass Storage driver... [ 2.229052] usbcore: registered new interface driver usb-storage [ 2.229054] USB Mass Storage support registered. [ 2.235827] scsi6 : usb-storage 1-5:1.0 [ 2.235987] usbcore: registered new interface driver ums-realtek [ 2.244451] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 2.244598] generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.244620] usbcore: registered new interface driver usbhid [ 2.244622] usbhid: USB HID core driver [ 3.091083] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.238275] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 3.348261] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.351897] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 47.138012] udevd[334]: starting version 173 [ 47.177678] lp: driver loaded but no devices found [ 47.197084] wmi: Mapper loaded [ 47.197526] acer_wmi: Acer Laptop ACPI-WMI Extras [ 47.210227] acer_wmi: Brightness must be controlled by generic video driver [ 47.566578] Disabling lock debugging due to kernel taint [ 47.584050] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 47.620666] type=1400 audit(1319239895.347:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser" [ 47.620934] type=1400 audit(1319239895.347:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser" [ 47.621108] type=1400 audit(1319239895.347:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser" [ 47.633056] [drm] Initialized drm 1.1.0 20060810 [ 47.722594] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 47.722602] i915 0000:00:02.0: setting latency timer to 64 [ 47.807152] ndiswrapper (check_nt_hdr:141): kernel is 64-bit, but Windows driver is not 64-bit;bad magic: 010B [ 47.807159] ndiswrapper (load_sys_files:206): couldn't prepare driver 'rt2860' [ 47.807930] ndiswrapper (load_wrap_driver:108): couldn't load driver rt2860; check system log for messages from 'loadndisdriver' [ 47.856250] usbcore: registered new interface driver ndiswrapper [ 47.861772] i915 0000:00:02.0: irq 47 for MSI/MSI-X [ 47.861781] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 47.861783] [drm] Driver supports precise vblank timestamp query. [ 47.861842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 47.980620] fixme: max PWM is zero. [ 48.286153] fbcon: inteldrmfb (fb0) is primary device [ 48.287033] Console: switching to colour frame buffer device 170x48 [ 48.287062] fb0: inteldrmfb frame buffer device [ 48.287064] drm: registered panic notifier [ 48.333883] acpi device:02: registered as cooling_device2 [ 48.334053] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 48.334128] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 48.334203] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 48.334644] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334652] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 48.334673] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 48.334737] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X [ 48.334772] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.356107] Adding 261116k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:261116k [ 48.380946] hda_codec: ALC268: BIOS auto-probing. [ 48.390242] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 48.390365] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 48.490870] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr [ 48.917990] ppdev: user-space parallel port driver [ 48.950729] type=1400 audit(1319239896.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 48.951114] type=1400 audit(1319239896.675:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 48.977706] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 [ 49.048871] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 49.078713] sky2 0000:02:00.0: eth0: enabling interface [ 49.079462] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 50.762266] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 50.762702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 54.751478] type=1400 audit(1319239902.475:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1039 comm="apparmor_parser" [ 54.755907] type=1400 audit(1319239902.479:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1040 comm="apparmor_parser" [ 54.756237] type=1400 audit(1319239902.483:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1040 comm="apparmor_parser" [ 54.756417] type=1400 audit(1319239902.483:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1040 comm="apparmor_parser" [ 54.764825] type=1400 audit(1319239902.491:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1041 comm="apparmor_parser" [ 54.768365] type=1400 audit(1319239902.495:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1041 comm="apparmor_parser" [ 54.770601] type=1400 audit(1319239902.495:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1041 comm="apparmor_parser" [ 54.770729] type=1400 audit(1319239902.495:14): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1038 comm="apparmor_parser" [ 54.775181] type=1400 audit(1319239902.499:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1043 comm="apparmor_parser" [ 54.775533] type=1400 audit(1319239902.499:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1043 comm="apparmor_parser" [ 54.936691] init: failsafe main process (891) killed by TERM signal [ 54.944583] init: apport pre-start process (1096) terminated with status 1 [ 55.000373] init: apport post-stop process (1160) terminated with status 1 [ 55.005291] init: gdm main process (1159) killed by TERM signal [ 59.782579] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 60.992021] eth0: no IPv6 routers present [ 61.936072] device eth0 entered promiscuous mode [ 62.053949] Bluetooth: Core ver 2.16 [ 62.054005] NET: Registered protocol family 31 [ 62.054007] Bluetooth: HCI device and connection manager initialized [ 62.054010] Bluetooth: HCI socket layer initialized [ 62.054012] Bluetooth: L2CAP socket layer initialized [ 62.054993] Bluetooth: SCO socket layer initialized [ 62.058750] Bluetooth: RFCOMM TTY layer initialized [ 62.058758] Bluetooth: RFCOMM socket layer initialized [ 62.058760] Bluetooth: RFCOMM ver 1.11 [ 62.059428] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 62.059432] Bluetooth: BNEP filters: protocol multicast [ 62.460389] init: plymouth-stop pre-start process (1662) terminated with status 1 '

Read the article

Good practices for large scale development/delivery of software

- by centic

What practices do you apply when working with large teams on multiple versions of a software or multiple competing projects? What are best practices that can be used to still get the right things done first? Is there information available how big IT companies do development and management of some of their large projects, e.g. things like Oracle Database, WebSphere Application Server, Microsoft Windows, ....?

Read the article

Wireless Connected But No Internet Connection (Ubuntu 12.04)

- by Zxy

I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

Read the article

Enterprise Service Bus (ESB): Important architectural piece to a SOA or is it just vendor hype?

Is an Enterprise Service Bus (ESB) an important architectural piece to a Service-Oriented Architecture (SOA), or is it just vendor hype in order to sell a particular product such as SOA-in-a-box? According to IBM.com, an ESB is a flexible connectivity infrastructure for integrating applications and services; it offers a flexible and manageable approach to service-oriented architecture implementation. With this being said, it is my personal belief that ESBs are an important architectural piece to any SOA. Additionally, generic design patterns have been created around the integration of web services in to ESB regardless of any vendor. ESB design patterns, according to Philip Hartman, can be classified in to the following categories: Interaction Patterns: Enable service interaction points to send and/or receive messages from the bus Mediation Patterns: Enable the altering of message exchanges Deployment Patterns: Support solution deployment into a federated infrastructure Examples of Interaction Patterns: One-Way Message Synchronous Interaction Asynchronous Interaction Asynchronous Interaction with Timeout Asynchronous Interaction with a Notification Timer One Request, Multiple Responses One Request, One of Two Possible Responses One Request, a Mandatory Response, and an Optional Response Partial Processing Multiple Application Interactions Benefits of the Mediation Pattern: Mediator promotes loose coupling by keeping objects from referring to each other explicitly, and it lets you vary their interaction independently Design an intermediary to decouple many peers Promote the many-to-many relationships between interacting peers to “full object status” Examples of Interaction Patterns: Global ESB: Services share a single namespace and all service providers are visible to every service requester across an entire network Directly Connected ESB: Global service registry that enables independent ESB installations to be visible Brokered ESB: Bridges services that are reluctant to expose requesters or providers to ESBs in other domains Federated ESB: Service consumers and providers connect to the master or to a dependent ESB to access services throughout the network References: Mediator Design Pattern. (2011). Retrieved 2011, from SourceMaking.com: http://sourcemaking.com/design_patterns/mediator Hartman, P. (2006, 24 1). ESB Patterns that "Click". Retrieved 2011, from The Art and Science of Being an IT Architect: http://artsciita.blogspot.com/2006/01/esb-patterns-that-click.html IBM. (2011). WebSphere DataPower XC10 Appliance Version 2.0. Retrieved 2011, from IBM.com: http://publib.boulder.ibm.com/infocenter/wdpxc/v2r0/index.jsp?topic=%2Fcom.ibm.websphere.help.glossary.doc%2Ftopics%2Fglossary.html Oracle. (2005). 12 Interaction Patterns. Retrieved 2011, from Oracle® BPEL Process Manager Developer's Guide: http://docs.oracle.com/cd/B31017_01/integrate.1013/b28981/interact.htm#BABHHEHD

Read the article

Portal Server comparisons / TCoO

- by Scott

We have a client whom is looking to incorporate Oracle Portal into our next release. I'm newer to this team, but the team is currently working with Apache, so whichever Portal Server we choose will likely incur a bit of a learning curve. Is there any comparison (not marketing) out there which discusses the differences in the servers and/or the total cost of ownership on them? With 5 developers, installing RAD becomes expensive, which I'd assume they'd wish to move onto us with the change to Oracle Portal and WebSphere.

Read the article

IBM DB2 Express on the Way

In the coming months, the IBM Software Group plans to offer versions of its DB2 database and WebSphere application and portal servers for midsize businesses under the Express banner, said sources close to the company. DB2 Express is slated to be released early next year.

Read the article

Fibre channel long distance woes

- by Marki

I need a fresh pair of eyes. We're using a 15km fibre optic line across which fibrechannel and 10GbE is multiplexed (passive optical CWDM). For FC we have long distance lasers suitable up to 40km (Skylane SFCxx0404F0D). The multiplexer is limited by the SFPs which can do max. 4Gb fibrechannel. The FC switch is a Brocade 5000 series. The respective wavelengths are 1550,1570,1590 and 1610nm for FC and 1530nm for 10GbE. The problem is the 4GbFC fabrics are almost never clean. Sometimes they are for a while even with a lot of traffic on them. Then they may suddenly start producing errors (RX CRC, RX encoding, RX disparity, ...) even with only marginal traffic on them. I am attaching some error and traffic graphs. Errors are currently in the order of 50-100 errors per 5 minutes when with 1Gb/s traffic. Optics Here is the power output of one port summarized (collected using sfpshow on different switches) SITE-A units=uW (microwatt) SITE-B ********************************************** FAB1 SW1 TX 1234.3 RX 49.1 SW3 1550nm (ko) RX 95.2 TX 1175.6 FAB2 SW2 TX 1422.0 RX 104.6 SW4 1610nm (ok) RX 54.3 TX 1468.4 What I find curious at this point is the asymmetry in the power levels. While SW2 transmits with 1422uW which SW4 receives with 104uW, SW2 only receives the SW4 signal with similar original power only with 54uW. Vice versa for SW1-3. Anyway the SFPs have RX sensitivity down to -18dBm (ca. 20uW) so in any case it should be fine... But nothing is. Some SFPs have been diagnosed as malfunctioning by the manufacturer (the 1550nm ones shown above with "ko"). The 1610nm ones apparently are ok, they have been tested using a traffic generator. The leased line has also been tested more than once. All is within tolerances. I'm awaiting the replacements but for some reason I don't believe it will make things better as the apparently good ones don't produce ZERO errors either. Earlier there was active equipment involved (some kind of 4GFC retimer) before putting the signal on the line. No idea why. That equipment was eliminated because of the problems so we now only have: the long distance laser in the switch, (new) 10m LC-SC monomode cable to the mux (for each fabric), the leased line, the same thing but reversed on the other side of the link. FC switches Here is a port config from the Brocade portcfgshow (it's like that on both sides, obviously) Area Number: 0 Speed Level: 4G Fill Word(On Active) 0(Idle-Idle) Fill Word(Current) 0(Idle-Idle) AL_PA Offset 13: OFF Trunk Port ON Long Distance LS VC Link Init OFF Desired Distance 32 Km Reserved Buffers 70 Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF Locked E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF LOS TOV enable OFF NPIV capability ON QOS E_Port OFF Port Auto Disable: OFF Rate Limit OFF EX Port OFF Mirror Port OFF Credit Recovery ON F_Port Buffers OFF Fault Delay: 0(R_A_TOV) NPIV PP Limit: 126 CSCTL mode: OFF Forcing the links to 2GbFC produces no errors, but we bought 4GbFC and we want 4GbFC. I don't know where to look anymore. Any ideas what to try next or how to proceed? If we can't make 4GbFC work reliably I wonder what the people working with 8 or 16 do... I don't assume that "a few errors here and there" are acceptable. Oh and BTW we are in contact with everyone of the manufacturers (FC switch, MUX, SFPs, ...) Except for the SFPs to be changed (some have been changed before) nobody has a clue. Brocade SAN Health says the fabric is ok. MUX, well, it's passive, it's only a prism, nature at it's best. Any shots in the dark? APPENDIX: Answers to your questions @Chopper3: This is the second generation of Brocades exhibiting the problem. Before we had 5000s, now we have 5100s. In the beginning when we still had the active MUX we rented a longdistance laser once to put it into the switch directly in order to make tests for a day, during that day of course it was clean. But as I said, sometimes it's clean just like that. And sometimes it's not. Alternative switches would mean to rebuild the entire SAN with those only to test. Alternative SFPs, well they're hard to come by just like that. @longneck: The line is rented. It's a dark fibre (9um monomode) so there's noone else on it. Sure there are splices. I can't go and look but I have to trust they have been done correctly. As I said the line has been checked and rechecked (using an optical time-domain reflectometer). Obviously you don't have all this equipment yourself because it's way too expensive. @mdpc: What would be the "wrong" type of cable according to you? Up to the switch everything is monomode, yes. The connectors are the correct ones too. Yeah I know there are the green ones where the fibre is cut off at a certain angle etc. But we have the correct ones for all that I know. Progress Report #1 We have had two fabrics (=2x2 switches) with Brocade 5100s with FabricOS 6.4.1 and two fabrics (another 2x4 switches) on FabricOS 7.0.2. On the longdistance ISLs (one in each fabric) it turned out that with FOS 6.4.1 setting it to long distance issues warnings about the VC Init setting and consequently the fill word. But those are only warnings. FOS 7.0.2 requires you to do modifications to VCI and the fillword for long distance links. Setting FOS 6.4.1 to the LS (long-distance static distance) setting with wrong VCI and fillword setting made the whole fabric inoperational (stuck in an SCN loop, use fabriclog -s to see, you don't see it anywhere else, no port error counters or anything increasing). Currently I'm giving the one fabric with the IMHO more correct settings a beating and it seems to do fine, whereas the other one without much traffic still has errors here and there. In short: We have eliminated the active part of the MUX (the FC retimer). We are putting the long distance SFPs into the end equipment themselves. Just to be sure we bought new monomode cables to connect the end equipment to the remaining passive part of the MUX. We are now trying out several long distance configs. It's almost black magic. Everything that happens is mostly empirical, noone seems to have a clue what are the exact reasons to do something. ("We have tried this, and it didn't work, then we tried that and it worked, so we stuck with that." But noone really seems to know why.) I'll keep you updated. Progress Report #2 We got the new lasers for one of the fabrics on warranty. It's ultra clean even on 4GbFC. They're transmitting with roughly 2mW (3dBm) whereas the others are only at 1.5mW (1.5dBm) although that should really be enough. The other fabric (where the lasers are apparently ok) still produces one or two CRCs infrequently. Using sfpshow the SFP producing the actual RX errors shows Status/Ctrl: 0x82 Alarm flags[0,1] = 0x5, 0x40 Warn Flags[0,1] = 0x5, 0x40 Now I'll have to find out what that means. Not sure if it was there before. Well I'll first clear my head with a week of vacation. 8-)

Read the article

Wicket, Spring and Hibernate - Testing with Unitils - Error: Table not found in statement [select re

- by John

Hi there. I've been following a tutorial and a sample application, namely 5 Days of Wicket - Writing the tests: http://www.mysticcoders.com/blog/2009/03/10/5-days-of-wicket-writing-the-tests/ I've set up my own little project with a simple shoutbox that saves messages to a database. I then wanted to set up a couple of tests that would make sure that if a message is stored in the database, the retrieved object would contain the exact same data. Upon running mvn test all my tests fail. The exception has been pasted in the first code box underneath. I've noticed that even though my unitils.properties says to use the 'hdqldb'-dialect, this message is still output in the console window when starting the tests: INFO - Dialect - Using dialect: org.hibernate.dialect.PostgreSQLDialect. I've added the entire dump from the console as well at the bottom of this post (which goes on for miles and miles :-)). Upon running mvn test all my tests fail, and the exception is: Caused by: java.sql.SQLException: Table not found in statement [select relname from pg_class] at org.hsqldb.jdbc.Util.sqlException(Unknown Source) at org.hsqldb.jdbc.jdbcStatement.fetchResult(Unknown Source) at org.hsqldb.jdbc.jdbcStatement.executeQuery(Unknown Source) at org.apache.commons.dbcp.DelegatingStatement.executeQuery(DelegatingStatement.java:188) at org.hibernate.tool.hbm2ddl.DatabaseMetadata.initSequences(DatabaseMetadata.java:151) at org.hibernate.tool.hbm2ddl.DatabaseMetadata.(DatabaseMetadata.java:69) at org.hibernate.tool.hbm2ddl.DatabaseMetadata.(DatabaseMetadata.java:62) at org.springframework.orm.hibernate3.LocalSessionFactoryBean$3.doInHibernate(LocalSessionFactoryBean.java:958) at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:419) ... 49 more I've set up my unitils.properties file like so: database.driverClassName=org.hsqldb.jdbcDriver database.url=jdbc:hsqldb:mem:PUBLIC database.userName=sa database.password= database.dialect=hsqldb database.schemaNames=PUBLIC My abstract IntegrationTest class: @SpringApplicationContext({"/com/upbeat/shoutbox/spring/applicationContext.xml", "applicationContext-test.xml"}) public abstract class AbstractIntegrationTest extends UnitilsJUnit4 { private ApplicationContext applicationContext; } applicationContext-test.xml: <?xml version="1.0" encoding="UTF-8"? <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tx="http://www.springframework.org/schema/tx" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.5.xsd http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.5.xsd" <bean id="dataSource" class="org.unitils.database.UnitilsDataSourceFactoryBean"/ </beans and finally, one of the test classes: package com.upbeat.shoutbox.web; import org.apache.wicket.spring.injection.annot.test.AnnotApplicationContextMock; import org.apache.wicket.util.tester.WicketTester; import org.junit.Before; import org.junit.Test; import org.unitils.spring.annotation.SpringBeanByType; import com.upbeat.shoutbox.HomePage; import com.upbeat.shoutbox.integrations.AbstractIntegrationTest; import com.upbeat.shoutbox.persistence.ShoutItemDao; import com.upbeat.shoutbox.services.ShoutService; public class TestHomePage extends AbstractIntegrationTest { @SpringBeanByType private ShoutService svc; @SpringBeanByType private ShoutItemDao dao; protected WicketTester tester; @Before public void setUp() { AnnotApplicationContextMock appctx = new AnnotApplicationContextMock(); appctx.putBean("shoutItemDao", dao); appctx.putBean("shoutService", svc); tester = new WicketTester(); } @Test public void testRenderMyPage() { //start and render the test page tester.startPage(HomePage.class); //assert rendered page class tester.assertRenderedPage(HomePage.class); //assert rendered label component tester.assertLabel("message", "If you see this message wicket is properly configured and running"); } } Dump from console when running mvn test: [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Building shoutbox [INFO] task-segment: [test] [INFO] ------------------------------------------------------------------------ [INFO] [resources:resources {execution: default-resources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. build is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 3 resources [INFO] Copying 4 resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [resources:testResources {execution: default-testResources}] [WARNING] File encoding has not been set, using platform encoding Cp1252, i.e. build is platform dependent! [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] Copying 2 resources [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] Nothing to compile - all classes are up to date [INFO] [surefire:test {execution: default-test}] [INFO] Surefire report directory: F:\Projects\shoutbox\target\surefire-reports INFO - ConfigurationLoader - Loaded main configuration file unitils-default.properties from classpath. INFO - ConfigurationLoader - Loaded custom configuration file unitils.properties from classpath. INFO - ConfigurationLoader - No local configuration file unitils-local.properties found. ------------------------------------------------------- T E S T S ------------------------------------------------------- Running com.upbeat.shoutbox.web.TestViewShoutsPage Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.02 sec INFO - Version - Hibernate Annotations 3.4.0.GA INFO - Environment - Hibernate 3.3.0.SP1 INFO - Environment - hibernate.properties not found INFO - Environment - Bytecode provider name : javassist INFO - Environment - using JDK 1.4 java.sql.Timestamp handling INFO - Version - Hibernate Commons Annotations 3.1.0.GA INFO - AnnotationBinder - Binding entity from annotated class: com.upbeat.shoutbox.models.ShoutItem INFO - QueryBinder - Binding Named query: item.getById = from ShoutItem item where item.id = :id INFO - QueryBinder - Binding Named query: item.find = from ShoutItem item order by item.timestamp desc INFO - QueryBinder - Binding Named query: item.count = select count(item) from ShoutItem item INFO - EntityBinder - Bind entity com.upbeat.shoutbox.models.ShoutItem on table SHOUT_ITEMS INFO - AnnotationConfiguration - Hibernate Validator not found: ignoring INFO - notationSessionFactoryBean - Building new Hibernate SessionFactory INFO - earchEventListenerRegister - Unable to find org.hibernate.search.event.FullTextIndexEventListener on the classpath. Hibernate Search is not enabled. INFO - ConnectionProviderFactory - Initializing connection provider: org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider INFO - SettingsFactory - RDBMS: HSQL Database Engine, version: 1.8.0 INFO - SettingsFactory - JDBC driver: HSQL Database Engine Driver, version: 1.8.0 INFO - Dialect - Using dialect: org.hibernate.dialect.PostgreSQLDialect INFO - TransactionFactoryFactory - Transaction strategy: org.springframework.orm.hibernate3.SpringTransactionFactory INFO - actionManagerLookupFactory - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) INFO - SettingsFactory - Automatic flush during beforeCompletion(): disabled INFO - SettingsFactory - Automatic session close at end of transaction: disabled INFO - SettingsFactory - JDBC batch size: 1000 INFO - SettingsFactory - JDBC batch updates for versioned data: disabled INFO - SettingsFactory - Scrollable result sets: enabled INFO - SettingsFactory - JDBC3 getGeneratedKeys(): disabled INFO - SettingsFactory - Connection release mode: auto INFO - SettingsFactory - Default batch fetch size: 1 INFO - SettingsFactory - Generate SQL with comments: disabled INFO - SettingsFactory - Order SQL updates by primary key: disabled INFO - SettingsFactory - Order SQL inserts for batching: disabled INFO - SettingsFactory - Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory INFO - ASTQueryTranslatorFactory - Using ASTQueryTranslatorFactory INFO - SettingsFactory - Query language substitutions: {} INFO - SettingsFactory - JPA-QL strict compliance: disabled INFO - SettingsFactory - Second-level cache: enabled INFO - SettingsFactory - Query cache: enabled INFO - SettingsFactory - Cache region factory : org.hibernate.cache.impl.bridge.RegionFactoryCacheProviderBridge INFO - FactoryCacheProviderBridge - Cache provider: org.hibernate.cache.HashtableCacheProvider INFO - SettingsFactory - Optimize cache for minimal puts: disabled INFO - SettingsFactory - Structured second-level cache entries: disabled INFO - SettingsFactory - Query cache factory: org.hibernate.cache.StandardQueryCacheFactory INFO - SettingsFactory - Echoing all SQL to stdout INFO - SettingsFactory - Statistics: disabled INFO - SettingsFactory - Deleted entity synthetic identifier rollback: disabled INFO - SettingsFactory - Default entity-mode: pojo INFO - SettingsFactory - Named query checking : enabled INFO - SessionFactoryImpl - building session factory INFO - essionFactoryObjectFactory - Not binding factory to JNDI, no JNDI name configured INFO - UpdateTimestampsCache - starting update timestamps cache at region: org.hibernate.cache.UpdateTimestampsCache INFO - StandardQueryCache - starting query cache at region: org.hibernate.cache.StandardQueryCache INFO - notationSessionFactoryBean - Updating database schema for Hibernate SessionFactory INFO - Dialect - Using dialect: org.hibernate.dialect.PostgreSQLDialect INFO - XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [org/springframework/jdbc/support/sql-error-codes.xml] INFO - SQLErrorCodesFactory - SQLErrorCodes loaded: [DB2, Derby, H2, HSQL, Informix, MS-SQL, MySQL, Oracle, PostgreSQL, Sybase] INFO - DefaultListableBeanFactory - Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@3e0ebb: defining beans [propertyConfigurer,dataSource,sessionFactory,shoutService,shoutItemDao,wicketApplication,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager]; root of factory hierarchy INFO - sPathXmlApplicationContext - Refreshing org.springframework.context.support.ClassPathXmlApplicationContext@a8e586: display name [org.springframework.context.support.ClassPathXmlApplicationContext@a8e586]; startup date [Tue May 04 18:19:58 CEST 2010]; root of context hierarchy INFO - XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [com/upbeat/shoutbox/spring/applicationContext.xml] INFO - XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [applicationContext-test.xml] INFO - DefaultListableBeanFactory - Overriding bean definition for bean 'dataSource': replacing [Generic bean: class [org.apache.commons.dbcp.BasicDataSource]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=close; defined in class path resource [com/upbeat/shoutbox/spring/applicationContext.xml]] with [Generic bean: class [org.unitils.database.UnitilsDataSourceFactoryBean]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in class path resource [applicationContext-test.xml]] INFO - sPathXmlApplicationContext - Bean factory for application context [org.springframework.context.support.ClassPathXmlApplicationContext@a8e586]: org.springframework.beans.factory.support.DefaultListableBeanFactory@5dfaf1 INFO - pertyPlaceholderConfigurer - Loading properties file from class path resource [application.properties] INFO - DefaultListableBeanFactory - Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5dfaf1: defining beans [propertyConfigurer,dataSource,sessionFactory,shoutService,shoutItemDao,wicketApplication,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager]; root of factory hierarchy INFO - AnnotationBinder - Binding entity from annotated class: com.upbeat.shoutbox.models.ShoutItem INFO - QueryBinder - Binding Named query: item.getById = from ShoutItem item where item.id = :id INFO - QueryBinder - Binding Named query: item.find = from ShoutItem item order by item.timestamp desc INFO - QueryBinder - Binding Named query: item.count = select count(item) from ShoutItem item INFO - EntityBinder - Bind entity com.upbeat.shoutbox.models.ShoutItem on table SHOUT_ITEMS INFO - AnnotationConfiguration - Hibernate Validator not found: ignoring INFO - notationSessionFactoryBean - Building new Hibernate SessionFactory INFO - earchEventListenerRegister - Unable to find org.hibernate.search.event.FullTextIndexEventListener on the classpath. Hibernate Search is not enabled. INFO - ConnectionProviderFactory - Initializing connection provider: org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider INFO - SettingsFactory - RDBMS: HSQL Database Engine, version: 1.8.0 INFO - SettingsFactory - JDBC driver: HSQL Database Engine Driver, version: 1.8.0 INFO - Dialect - Using dialect: org.hibernate.dialect.PostgreSQLDialect INFO - TransactionFactoryFactory - Transaction strategy: org.springframework.orm.hibernate3.SpringTransactionFactory INFO - actionManagerLookupFactory - No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended) INFO - SettingsFactory - Automatic flush during beforeCompletion(): disabled INFO - SettingsFactory - Automatic session close at end of transaction: disabled INFO - SettingsFactory - JDBC batch size: 1000 INFO - SettingsFactory - JDBC batch updates for versioned data: disabled INFO - SettingsFactory - Scrollable result sets: enabled INFO - SettingsFactory - JDBC3 getGeneratedKeys(): disabled INFO - SettingsFactory - Connection release mode: auto INFO - SettingsFactory - Default batch fetch size: 1 INFO - SettingsFactory - Generate SQL with comments: disabled INFO - SettingsFactory - Order SQL updates by primary key: disabled INFO - SettingsFactory - Order SQL inserts for batching: disabled INFO - SettingsFactory - Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory INFO - ASTQueryTranslatorFactory - Using ASTQueryTranslatorFactory INFO - SettingsFactory - Query language substitutions: {} INFO - SettingsFactory - JPA-QL strict compliance: disabled INFO - SettingsFactory - Second-level cache: enabled INFO - SettingsFactory - Query cache: enabled INFO - SettingsFactory - Cache region factory : org.hibernate.cache.impl.bridge.RegionFactoryCacheProviderBridge INFO - FactoryCacheProviderBridge - Cache provider: org.hibernate.cache.HashtableCacheProvider INFO - SettingsFactory - Optimize cache for minimal puts: disabled INFO - SettingsFactory - Structured second-level cache entries: disabled INFO - SettingsFactory - Query cache factory: org.hibernate.cache.StandardQueryCacheFactory INFO - SettingsFactory - Echoing all SQL to stdout INFO - SettingsFactory - Statistics: disabled INFO - SettingsFactory - Deleted entity synthetic identifier rollback: disabled INFO - SettingsFactory - Default entity-mode: pojo INFO - SettingsFactory - Named query checking : enabled INFO - SessionFactoryImpl - building session factory INFO - essionFactoryObjectFactory - Not binding factory to JNDI, no JNDI name configured INFO - UpdateTimestampsCache - starting update timestamps cache at region: org.hibernate.cache.UpdateTimestampsCache INFO - StandardQueryCache - starting query cache at region: org.hibernate.cache.StandardQueryCache INFO - notationSessionFactoryBean - Updating database schema for Hibernate SessionFactory INFO - Dialect - Using dialect: org.hibernate.dialect.PostgreSQLDialect INFO - DefaultListableBeanFactory - Destroying singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@5dfaf1: defining beans [propertyConfigurer,dataSource,sessionFactory,shoutService,shoutItemDao,wicketApplication,org.springframework.aop.config.internalAutoProxyCreator,org.springframework.transaction.annotation.AnnotationTransactionAttributeSource#0,org.springframework.transaction.interceptor.TransactionInterceptor#0,org.springframework.transaction.config.internalTransactionAdvisor,transactionManager]; root of factory hierarchy Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 1.34 sec <<< FAILURE! Running com.upbeat.shoutbox.integrations.ShoutItemIntegrationTest Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0 sec <<< FAILURE! Running com.upbeat.shoutbox.mocks.ShoutServiceTest Tests run: 1, Failures: 0, Errors: 1, Skipped: 0, Time elapsed: 0.01 sec <<< FAILURE! Results : Tests in error: initializationError(com.upbeat.shoutbox.web.TestViewShoutsPage) testRenderMyPage(com.upbeat.shoutbox.web.TestHomePage) initializationError(com.upbeat.shoutbox.integrations.ShoutItemIntegrationTest) initializationError(com.upbeat.shoutbox.mocks.ShoutServiceTest) Tests run: 4, Failures: 0, Errors: 4, Skipped: 0 [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] There are test failures. Please refer to F:\Projects\shoutbox\target\surefire-reports for the individual test results. [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 3 seconds [INFO] Finished at: Tue May 04 18:19:58 CEST 2010 [INFO] Final Memory: 13M/31M [INFO] ------------------------------------------------------------------------ Any help is greatly appreciated.

Search Results

Search found 1139 results on 46 pages for 'websphere tx'.

Page 25/46 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32 | Next Page >

- by user1622959

- by genesis

- by user42424

- by Korakys

- by shrimpy

- by Rodnower

- by Mashimom

- by Rodnower

- by user27388

- by Niko

- by Elie

- by user359427

- by eeeeaaii

- by lurscher

- by doubleJ

- by Bikonja

- by Jürgen Kress

- by Jon

- by centic

- by Zxy

- by Scott

- by Marki

- by John

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32 | Next Page >