Search Results

Search found 20475 results on 819 pages for 'multiple repositories'.

Page 250/819 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• How to remove all Couchdb versions in Ubuntu 10.04 (server)? ( after multiple installs )

  - by DjangoRocks

  Hi all, I have done multiple installs of CouchDB using sudo aptitude install couchdb sudo ap-get install couchdb and more recently based on the instructions found at L http://wiki.apache.org/couchdb/Installing_on_Ubuntu May I know how do I uninstall or remove all the above installations? Best Regards. +++++++++++++++++++UPDATE++++++++++++++++++++++++ I've tried running the following commands: apt-get remove couchdb apt-get purge couchdb but received the following errors: (Reading database ... 39814 files and directories currently installed.) Removing couchdb ... invoke-rc.d: initscript couchdb, action "stop" failed. dpkg: error processing couchdb (--remove): subprocess installed pre-removal script returned error exit status 1 invoke-rc.d: initscript couchdb, action "start" failed. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: couchdb E: Sub-process /usr/bin/dpkg returned an error code (1) May I know how do i fix this? ON issuing the command : dpkg -l | grep couchdb I received the following response: rF couchdb 0.10.0-1ubuntu2 RESTful document oriented database, system D iF couchdb-bin 0.10.0-1ubuntu2 RESTful document oriented database, programs How do i uninstall CouchDB ? I think there's some file corruption?

  Read the article

• how to authenticate once for multiple servers, using only apache configs?

  - by Wang

  My problem is, I have a number of prepackaged web apps (a print system, a wiki, a bug tracker, an email archive, etc.) running on different Mac OS X Leopard (soon to be SL) servers that each need to authenticate users from the internet at large. Right now every server presents an Apache basic authentication prompt, which takes a shared login, but it's apparently enough of an inconvenience to log in repeatedly that people are sending email without checking the wiki or bug tracker or archive. In the case of the bug tracker, a user [might need to log in twice---once for apache if he hasn't used any other protected service on that server, once for the bug tracker itself so it can distinguish different people. Since the only common component to all these apps is Apache 2 itself, does it have any way of authenticating a user once, in some way that will be respected by other servers and various web apps? Looked at http://serverfault.com/questions/32421/how-is-session-stickiness-achieved-across-multiple-web-servers but it sounds like the answer is assuming that I get to write my own web app. Looked at Ian Bicking's blog but it's four years old and recommends something available only for apache 1.3, not apache 2. Sorry not to hyperlink the second site---apparently I need 10 reputation points. Edit: Shibboleth does what I need, but I should have specified that I'm looking for a really dumb, really simple solution for in-house services that need to handle all of a dozen users, probably not more than three at a time.

  Read the article

• What are some techniques to monitor multiple instances of a piece of software?

  - by Geo Ego

  It was recommended that I ask this question here by a member of StackOverflow. I have a piece of self-serve kiosk software that will be running at multiple sites. I'd like to monitor their status remotely. The kiosk application itself is pretty much finished. I am now in the process of creating a piece of software that will monitor all of the kiosks from a central location so that the customer can view particular details remotely (for instance, how many bills are in the acceptor's cash cartridge, what customer is currently logged in, etc.). Because I am in such an early stage of development, my options are quite open. I understand that I'm not giving very many qualifications, but I'd like to try to get a good variety of potential solutions. Some details: Kiosk software is a VB6 app running on Windows Embedded Monitoring software will be run on a modern desktop version of Windows (either XP, Vista, or 7) Database is SQL Server 2008 My initial idea was to develop a .NET app that would simply report the last database transaction for each kiosk at a set interval (say every second or so) but I'd really like for the kiosk software to report its status in real-time. I'm not exactly sure where to begin in terms of what modifications may need to be made to the kiosk software, and what the monitoring software will require. Links to articles on these topics would be most welcome.

  Read the article

• Why would Windows Task Scheduler spawn multiple instances of the same task that run into each other?

  - by swagner88

  Overview: I use Windows Task Scheduler to run automated tasks. Occasionally I will see that randomly a task has failed to perform its duties. When I check Task Scheduler to see what has occurred in the history log, I see that for some reason, when the tasks are triggered at their schedules, they are spawning several instances of themselves simultaneously which turns into a train wreck for the task and it either kills the other instances and tries to run the "first" one, or it just does not run at all as it believes another instance of itself is already running. Sometimes this occurs in the same tasks and then occasionally it happens with others. The fix is just to end all instances and start the task manually. Question: Why would one single task with one single schedule decide to spawn multiple instance of itself simultaneously? Note: I've got a separate user account set to run the tasks instead of myself. That user is indeed an admin on the machine that runs the tasks and the tasks are set to tun whether or not the user is logged on. Also, the machine is windows server 08 R2.

  Read the article

• What is the best way/Software to manage multiple short lived instances of virtual machines ?

  - by Newtopian

  Hi, We have a QA department that have to test our software on multiple combination of OS and DMBS. With Windows spewing out many different versions the combinatorial math of all this can be daunting. So we decided on visualizing our setups but so far it only displaces the problem. The cost of hardware is expensive and we need many different combination far exceeding your server capacity to deliver. Also, these instances are throw away, once the test is complete we no longer need it, furthermore to ensure proper test isolation we should start fresh from a new instance. Lastly we only need a small subset of these system online at any given time. What I am looking for is a way to manage inventory so that our QA staff can order instances to be put online as required and discarded once used. Instances are spawned from a pool of freshly installed systems with the appropriate combination ready to accept our software. It also should be possible for two or more people to start the same instance at the same time, though we could manage without this if it proves too complex to put in place. Finally our budget is pretty thin, we can probably make some purchases but ideally expenditures should be kept to a minimum. To summarize we should be able to : Bring instances online on demand. Ideally should offer queue and scheduling management Destroy instances on demand Keep masters in inventory but not online. Manage large inventory of VMs (30-100 maybe more) with small staff of users (5-10). Allow adding, deleting and changing instances from inventory (bring online, make changes and check back in, or create new and check in). Allow few long lived instances for support tools (normal VM server usage) Thanks for your answers

  Read the article

• How does one make sure or even guarantee server time are sync correctly between dozens of servers across multiple datacenter on different location?

  - by forestclown

  Currently our web applications contain a logic to check if the data sent to the web server is expired or not by comparing the timestamp of the data with the date/time of the server. Everything goes will, until some dude from data center accidentally modify one of the web server date/time and causes some disruptions in our web services. My managers are of course not happy with this, and said we shouldn't use timestamp to check expiry in the first place...anyway.... Network Time Protocol is implemented, because of data centers are spread across different continents so we have one NTP server in each data center. The servers within the data center will have cron jobs to check against the time with their NTP server from the same data center. If time is out of sync it will auto update the server date/time. But then with our managers not happy with it, and think it could still easily causes the same problem. e.g. what if someone accidentally modify the NTP date/time? what if all the NTP servers are out of sync with each other? which NTP servers we can really trust? and blah blah.. So my questions are: What are the current practice to sync date/time between servers across multiple data centers or locations? How does one manages time stamp between web apps? e.g. Server A send data (contain timestamp of Server A) to Server B (compare timestamp between Server B and the timestamp from the data to see if it has expired or not. This is to avoid HTTP replay) Should we really not use timestamp check? Thanks & Best Regards

  Read the article

• Can I use multiple URLs in the URL field of KeePass?

  - by Sammy

  I am using KeePass version 2.19. What I would like to do is have more than just one URL address associated with a given user name and password. The entry for a given website might look something like this... Title google User Name email Password pass URL https://accounts.google.com/ServiceLogin?hl=en&continue=https://www.google.com/ https://accounts.google.com/ServiceLogin?hl=sv&continue=https://www.google.com/ https://accounts.google.com/ServiceLogin?hl=de&continue=https://www.google.com/ As you can see the ?hl=en changes into ?hl=sv and then to ?hl=de for the three different languages in which I wish to view the Google log-in page. But this of course could be something completely different, like different web services from the same provider like YouTube and Gmail by Google. Very much like SE where you have several websites but only use one user name and password. I imagine something along the lines of having multiple entries for one and the same website, where KeePass would actually prompt you to choose which one you want to use. So you have several user names and passwords that use the same URL. But is it possible to have several URLs using the same user name and password, so that KeePass asks me "to which of the following three URLs do you want to auto-log into with this password"?

  Read the article

• How do I setup JBoss 5.1.0.GA to run multiple instances?

  - by djangofan

  Does anyone have any experience or advice in setting up multiple JBoss 5.1.x instances on the same machine that has 1 network card? Here is what I did: Installed JBoss 5.1.0.GA into c:\myjboss 1.5. I copied the server/default directory to server/ports-01 and server/ports-02 so they have their own config. did I assume correctly? Ran .\run.bat -c ports-01 Ran .\run.bat -c ports-02 At this point there are 2 instances but the second instance doesn't load correctly because of what is probably a few port conflicts. For example: the http port ends up being 8080 for both instances, which it gets from line #49 in the C:\myjboss\server\all\conf\bindingservice.beans\META-INF\bindings-jboss-beans.xml file. Earlier in the server load it clearly gets the value from line#63 in that same file. I don't know why it gets part of the port config from line #49 and the other part from line#63. Confused. I also tried: .\run.bat -Djboss.service.binding.set=ports-01 -c ports-01 and it made little difference. Any ideas on what I am doing wrong?

  Read the article

• How do I run multiple MVC apps within a subdomain on IIS7?

  - by Matthew Patrick Cashatt

  Hello and thanks for looking. Background I am currently wrapping up a development contract and the client would like for me to push a build of the application to their IIS 7-based server in which they would like to run multiple MVC apps. One of the issues I have off of the bat is that this server is already a subdomain on their larger network. So, if I enter SERVERNAME in my browser, it automatically directs to SERVERNAME.COMPANYNAME.COM. Now, this is just fine if I place my application in the default website/root. In this scenario, clicking a link that requests admin.html directs to `SERVERNAME.COMPANYNAME.COM/admin.html' as usual. BUT they want me to place the app in a subdomain on this server so that they can also run other apps on the same server. So I assume that I need MYAPP.SERVERNAME.COMPANYNAME.COM but I have no idea how to do that. Complicating matters is that my app and the future ones they wish to install are all MVC based which intercepts and re-writes URLs. I assume that this takes care of itself if I can just successfully get my app into a subdomain to begin with. What I have tried Creating a new site on the server in it's own app pool Setting the binding for that site to MYAPP.SERVERNAME.COMPANYNAME.COM Setting the binding for that site to MYAPP Setting the binding for that site to MYAPP.SERVERNAME Setting the binding for that site to MYAPP.SERVERNAME.COM Setting the binding for that site to MYAPP.COMPANYNAME.COM Nothing is working. Am I missing something simple here? Thanks, Matt

  Read the article

• is a wildcard SSL the only option in this multiple VHOST/1IP setup?

  - by solsol

  I have a web app set up that needs the following SSL encryption: secure.myapp.com -> SSL www.myapp.com/login -> SSL www.myapp.com/signup -> SSL If I'm correct, I could run one SSL certificate for my whole www.myapp.com/* pages. The problem is that I have a subdomain called secure.myapp.com that either needs to be on a separate IP address to work with SSL. Right now I have one server, one public IP and a number of Virtual Hosts in apache to make this work. I'd rather not buy an expensive Wildcard SSL certificate to secure just one subdomain. What is your advice on this? If it IS the only solution any tips on getting a price worthy wildcard SSL cert is appreciated. I have read about SNI that allows the use of multiple SSL certs, but not all browsers (IE6!) support this. Since we are building a web app for the public, we cannot have IE6 to run on unencrypted connections. Thanks for you help

  Read the article

• Is there any way to distribute x264 encoding jobs across multiple computers (to increase the encoding speed)?

  - by Breakthrough

  Does anyone know of a current, active solution to encoding x264 videos across many computers (via the network) to increase encoding FPS? Brownie points for cross-platform and open source, but just so you all know, I usually use Windows. Programs that I have heard of, and why I do not believe they are suitable: x264farm: Not actively developed. Good interface, but does not support two-pass encoding, and fails with newer x264 builds. ELDER: Again, not actively developed, but my issue was that it didn't work with new x264 builds, and it was very difficult to configure (read: randomly stopped working). While I don't absolutely need a program which is being actively developed, I would like one that supports two-pass encoding, and works with new(er) x264 builds. Additional information: So far, I've offered (and awarded!) two separate bounties on this question since I first posted it over two years ago, and I still haven't found a solution to this problem. What I'm looking for basically is a simple program to allow me to encode x264 videos using the processing power of multiple computers connected over a LAN. Furthermore, it would be nice if it worked with new(er) x264 builds, and supported two-pass encoding. If at any time someone has an updated answer, or a new solution to this problem, please post it and it will be given some consideration.

  Read the article

• What's the best way to clone multiple PCs from one machine?

  - by Jason T.

  Where I work we have dozens and dozens of old ThinkPad laptops. A lot of these can be reused but not for our needs. They have been long since replaced. The higher-ups have decided to donate them to charity. For better or for worse I have been tasked with reimaging them. I took a laptop and installed the factory copy of Windows, updated it, configured it appropriately. Now I'm trying to reimage it to dozens of other laptops. What's some good software to do this? First I used clonezilla to clone the hdd in the laptop to an internal drive in an external enclosure and it worked. Then I tried taking the base image out and connecting it externally to a laptop that needed to be imaged and I got it to work a few times. So far so good, right? Well once I informed my boss of my findings and what I would want to do then the images started to not work on new laptops. One of three things would happen: The Thinkpads would just blink at me and Windows wouldn't load. Or Windows would load but freeze within two minutes. Last but not least the laptops would BSOD during the Windows XP bootup. These laptops are not going to be used by the company. They're going to charity. So can anyone else recommend a way to reimage multiple laptops?

  Read the article

• How can I resize images in multiple subdirectories more effectively?

  - by jtfairbank

  I have the original images in a directory structure that looks like this: ./Alabama/1.jpg ./Alabama/2.jpg ./Alabama/3.jpg ./Alaska/1.jpg ...the rest of the states... I wanted to convert all of the original images into thumbnails so I can display them on a website. After a bit of digging / experimenting, I came up with the following Linux command: find . -type f -iname '*.jpg' | sed -e 's/\.jpg$//' | xargs -I Y convert Y.jpg -thumbnail x100\> Y-small.jpg It recursively finds all the jpg images in my subdirectories, removes the file type (.jpg) from them so I can rename them later, then makes them into a thumbnail and renames them with '-small' appended before the file type. It worked for my purposes, but its a tad complicated and it isn't very robust. For example, I'm not sure how I would insert 'small-' at the beginning of the file's name (so ./Alabama/small-1.jpg). Questions: Is there a better, more robust way of creating thumbnails from images that are located in multiple subdirectories? Can I make the existing command more robust (for example, but using sed to rename the outputted thumbnail before it is saved- basically modify the Y-small.jpg part).

  Read the article

• Anyone recommend a program to print multiple HTML files at once for end users?

  - by Keith Bentrup

  I have some clients with multiple html files in folders that are occasionally updated & printed. They would like to be able to print them all at once without having to open each one. I typically do this with a quick command for myself, but I'm unaware of any freeware to do this. After a google search, I'm not finding one, so I'm hoping someone can help. I'd rather not use a script to do this for various security/ease of use/familiarity reasons, I'd rather be able to just point to a simple program they can download and use on their windows desktops. Anyone know of one or some other easy solution to do this? Maybe I'm overlooking the obvious. If anyone's curious, this is what I do for myself (not for my clients): for %h in (*.html) do type "%h" >> all.htm then open all.htm & print. If I need a page break on each doc, I just search and replace in all.htm </body> with <p style="page-break-after:always">&nbsp;</p></body>. It's quick & simple, but too unfamiliar for them. Thanks!

  Read the article

• How to keep multiple servers in sync file wise?

  - by GForceSys

  I'm currently managing a cluster of PHP-FPM servers, all of which tend to get out of sync with each other. The application that I'm using on top of the app servers (Magento) allows for admins to modify various files on the system, but now that the site is in a clustered set up modifying a file only modifies it on a single instance (on one of the app servers) of the various machines in the cluster. Is there an open-source application for Linux that may allow me to keep all of these servers in sync? I have no problem with creating a small VM instance that can listen for changes from machines to sync. In theory, the perfect application would have small clients that run on each machine to be synced, which would talk to the master server which would then decide how/what to sync from each machine. I have already examined the possibilities of running a centralized file server, but unfortunately my app servers are spread out between EC2 and physical machines, which makes this unfeasible. As there are multiple app servers (some of which are dynamically created depending on the load of the site), simply setting up a rsync cron job is not efficient as the cron job would have to be modified on each machine to send files to every other machine in the cluster, and that would just be a whole bunch of unnecessary data transfers/ssh connections.

  Read the article

• How to allow multiple filters to be selected - pagination?

  - by NewSOuser

  Hey, I am still trying to allow multiple filters to be selected for my pagination script but not sure how to do it being very new to php and programing in general. So in my pagination, when a user clicks the 'marketing' button(link) it queries the database just for the category that = marketing. The same goes for the other 2 filter buttons as seen in the script below. (automotive, sports). The problem is, I want to be able to select multiple filters like only marketing and auomotive or automotive and sports, for example if I click the marketing filter and then the automotive, it would display the categories that equal marketing, and automotive. I have no idea how to accomplish this, so I have come to the experts to help me out. This is the script I am working on: <h3>Filter results by:</h3> <a href='pagi_test.php?category=marketing'>marketing</a> <a href='pagi_test.php?category=automotive'>automotive</a> <a href='pagi_test.php?category=sports'>sports</a> <br /> <h3>Results:</h3> <?php //connecting to the database $error = "Could not connect to the database"; mysql_connect('localhost','root','root') or die($error); mysql_select_db('ajax_demo') or die($error); //max displayed per page $per_page = 3; //get start variable $start = $_GET['start']; $category = mysql_real_escape_string($_GET['category']); //count records $record_count = mysql_num_rows(mysql_query("SELECT * FROM explore WHERE category='$category'")); //count max pages $max_pages = $record_count / $per_page; //may come out as decimal if (!$start) $start = 0; //display data $get = mysql_query("SELECT * FROM explore WHERE category='$category' LIMIT $start, $per_page"); ?> <table width="800px"> <?php while ($row = mysql_fetch_assoc($get)) { // get data $id = $row['id']; $site_name = $row['site_name']; $site_description = $row['site_description']; ?> <tr> <td><?php echo $id; ?></td> <td><?php echo $site_name; ?></td> <td><?php echo $site_description; ?></td> </tr> <?php } //setup prev and next variables $prev = $start - $per_page; $next = $start + $per_page; //show prev button if (!($start<=0)) echo "<a href='pagi_test.php?category=$category&start=$prev'>Prev</a> "; //show page numbers //set variable for first page $i=1; for ($x=0;$x<$record_count;$x=$x+$per_page) { if ($start!=$x) echo " <a href='pagi_test.php?category=$category&start=$x'>$i</a> "; else echo " <a href='pagi_test.php?category=$category&start=$x'><b>$i</b></a> "; $i++; } //show next button if (!($start>=$record_count-$per_page)) echo " <a href='pagi_test.php?category=$category&start=$next'>Next</a>"; ?> Any help on this would be great. Thank you. -- EDIT -- If anyone has a better method of doing a pagination system with multiple filters than the one above, please let me know.

  Read the article

• How to search Multiple Sites using Lucene Search engine API?

  - by Wael Salman

  Hope that someone can help me as soon as possible :-) I would like to know how can we search Multiple Sites using Lucene??! (All sites are in one index). I have succeeded to search one website , and to index multiple sites, however I am not able to search all websites. Consider this method that I have: private void PerformSearch() { DateTime start = DateTime.Now; //Create the Searcher object string strIndexDir = Server.MapPath("index") + @"\" + mstrURL; IndexSearcher objSearcher = new IndexSearcher(strIndexDir); //Parse the query, "text" is the default field to search Query objQuery = QueryParser.Parse(mstrQuery, "text", new StandardAnalyzer()); //Create the result DataTable mobjDTResults.Columns.Add("title", typeof(string)); mobjDTResults.Columns.Add("path", typeof(string)); mobjDTResults.Columns.Add("score", typeof(string)); mobjDTResults.Columns.Add("sample", typeof(string)); mobjDTResults.Columns.Add("explain", typeof(string)); //Perform search and get hit count Hits objHits = objSearcher.Search(objQuery); mintTotal = objHits.Length(); //Create Highlighter QueryHighlightExtractor highlighter = new QueryHighlightExtractor(objQuery, new StandardAnalyzer(), "<B>", "</B>"); //Initialize "Start At" variable mintStartAt = GetStartAt(); //How many items we should show? int intResultsCt = GetSmallerOf(mintTotal, mintMaxResults + mintStartAt); //Loop through results and display for (int intCt = mintStartAt; intCt < intResultsCt; intCt++) { //Get the document from resuls index Document doc = objHits.Doc(intCt); //Get the document's ID and set the cache location string strID = doc.Get("id"); string strLocation = ""; if (mstrURL.Substring(0,3) == "www") strLocation = Server.MapPath("cache") + @"\" + mstrURL + @"\" + strID + ".htm"; else strLocation = doc.Get("path") + doc.Get("filename"); //Load the HTML page from cache string strPlainText; using (StreamReader sr = new StreamReader(strLocation, System.Text.Encoding.Default)) { strPlainText = ParseHTML(sr.ReadToEnd()); } //Add result to results datagrid DataRow row = mobjDTResults.NewRow(); if (mstrURL.Substring(0,3) == "www") row["title"] = doc.Get("title"); else row["title"] = doc.Get("filename"); row["path"] = doc.Get("path"); row["score"] = String.Format("{0:f}", (objHits.Score(intCt) * 100)) + "%"; row["sample"] = highlighter.GetBestFragments(strPlainText, 200, 2, "..."); Explanation objExplain = objSearcher.Explain(objQuery, intCt); row["explain"] = objExplain.ToHtml(); mobjDTResults.Rows.Add(row); } objSearcher.Close(); //Finalize results information mTsDuration = DateTime.Now - start; mintFromItem = mintStartAt + 1; mintToItem = GetSmallerOf(mintStartAt + mintMaxResults, mintTotal); } as you can see that I use the site URL 'mstrURL' when I create the search object string strIndexDir = Server.MapPath("index") + @"\" + mstrURL; How can I do the same when I want to search multiple sites?? Actually I am using the code from http://www.keylimetie.com/blog/2005/8/4/lucenenet/

  Read the article

• How to use crontab, .netrc, and git push?

  - by Jon

  Hi all, I am in the process of automating the backups from various servers to a central point then pushing those config changes into a git repo so i can track any changes over time. The rest of the scripts are working well, I can copy / rsync the files across the network to a central point. The last script is to get the config files to be put into / updated in repository. The script is as follows: #!/bin/bash clear SERVERNAME="betty" SCRIPTDIR="/home/jon" GITROOT="/tmp/git" TEMPROOT="/tmp/backups" BACKUPROOTDIR="/mnt/backups" echo " - running as user: $UID" echo "backingup git config on $SERVERNAME" echo "" # check to see if root backup folder exists, otherwise create it. if [ -d $GITROOT ]; then rm -rf $GITROOT fi mkdir $GITROOT cd $GITROOT echo " - testing if home is where I think it should be!" echo $HOME echo " - testing if it can see netrc" tail $HOME/.netrc git clone http://192.168.10.97:8000/repositories/HOH-config-backups.git cd HOH-config-backups echo " - copy Configuration Folders across" cp -r $BACKUPROOTDIR/Configuration/* $GITROOT/HOH-config-backups/ cp -r $BACKUPROOTDIR/scripts $GITROOT/HOH-config-backups/ git add . git commit -a -m "committing any new configuration changes!" git push origin master echo "" echo "Git repo updated" echo "" echo " - backing up this script" FIREWIGSCRIPTLOC="$BACKUPROOTDIR/scripts/$SERVERNAME" if [ ! -d $FIREWIGSCRIPTLOC ]; then mkdir $FIREWIGSCRIPTLOC fi cp /home/jon/gitConfig.sh $FIREWIGSCRIPTLOC The git repo is on a different machine in the network using Apache and HTTP-backend.exe (smart HTTP protocol). If I run this script as me "jon" it works. If I run it in crontab it fails. git uses the /home/jon/.netrc file for authentication: machine 192.168.10.97 login gitconfig password 1234579 The log from crontab is: TERM environment variable not set. - running as user: 1000 backingup git config on betty - testing if home is where I think it should be! /home/jon - testing if it can see netrc machine 192.168.10.97 login gitconfig password 1234579 got 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd walk 08de5bc2b27b4940d9412256e76d5e3c3d9dbcdd got be880f2d306778a538d592e7a02eb19f416612f7 got bd387e8def9f77aafa798bf53e80d949aba443e8 got 1bc1a59e12775841d4c59d77c63b8a73823138c2 walk bd387e8def9f77aafa798bf53e80d949aba443e8 Getting alternates list for http://192.168.10.97:8000/repositories/HOH-config-backups.git got 030512237bca72faf211e0e8ec2906164eac34f6 got 9bc2f575240bc1f61ff7d69777ce1a165d06b184 got b8400f7f01429104a9d4786a6bb1a16d293e37c1 got 2403b5bf611010e0b401f776f0e23b09ce744838 got 1a27944c48269ef3608a8f2466e43402d06faac0 got b686f45b7d57af4fa8ca0d528bb85216d6247e19 Getting pack list for http://192.168.10.97:8000/repositories/HOH-config-backups.git Getting index for pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff Getting pack ae881957c0f0e8c22eb6cc889a22ef78eb4ce6ff which contains ff84d6d48e9326066438d167a10251218d612b3d walk b686f45b7d57af4fa8ca0d528bb85216d6247e19 got 364e30daec17814073e668f490bb84af891fe1f7 got 23f6497e7f9b80e0d90adad73bd0407a0e5ac6ce got 9e77c47574b5e23ea669afe0c23ab235e4917ee1 got 6654e0d328a216b3783e98c47206cb2d01b3353d got 28821ffd437d2689ffb82c6e4b9c3f5372c95c4b got 8c384a24f645389e4d4b08013c79e9e73a658342 got d203be0123736ee025ce20c081f1489098648dfc got 1852603bf7709e71417d8ccec02390279d533642 got fb753a26b20b04694419fce8ecdaa8dbec105cf1 got 736028997cd84dd1c135f57e9d246674b9cd0b9d got 7af836249e20096d0476a548d5be702a071cdd4b got 240dc39d9db50df63073fc7927b2d002dfa0f54c got 93abd36e3935a01011eb753b635a1a0e984bf31e got c6269e28fecf4d8d0d98b9358aecb3acff02df44 got b0aa29432f73e64032682a351d436c24b14078ab walk 240dc39d9db50df63073fc7927b2d002dfa0f54c got 58fb66d9f35f8a5e32ff4683309c5f0c2a3a03c5 got 0da2def4de0565483cdbe6b87418ee2beb122e58 got 0f6a86c6f87ed52ad2ed01e5c6edd661d364930c got 437a93d27b5bb89c739a0564a34a616e832c3ebe got fe0385abe5c0acd8462268dac330bae00e934f1b got 24259f8f5c5c9ee974a75fe3d1e07c02e3e20fe9 got d29f624bf1a5eceedaa86c10fee35f62747c7d04 got 0154e4c987132585ea7a92b77d02dba285512d6b got eda8bf526567c25ee70addb2ad3c3c6aa57eac77 got 9f3d9d7262d66f9fa4f6a13b7c86199953f4bc4e got 8e20881e19667aa22245d0598646991067455a4d got abb1123145689b35eb19519952c71253ee45fa98 got dfeff593c79b4156ce2ce1adf043d0e80356488c got e20c5b48b1d360e0bcf34189e3f3d2bbf23e92cc got b13eb81cc274780322ecf786372320343926bec9 walk 8de83868b3fac748b0a55eba16c8f668ec852abb got b5961421bbc42afe7a07cc1c8b615aba26ba74d7 got 2650ba819019df4193b482733e29ca79b29f3f2c got b3111e1be8103e91803a97a817ed81f28025aca1 got b060be934d709684f5eb5dad3c03932a3589e864 got cf70d2043f081d7a4438e9d5a290a9f986c84060 got 80bf0f1cc836feab86d6935bb7968d8555a8d531 got da318d167920e34bc6573e4fc236249ccbbee316 got d82ac853d387b760149599e6e1ab96403f6ec672 got 0005f691d1f46550fdb4e56025f52e30a5b18cc2 Initialized empty Git repository in /tmp/git/HOH-config-backups/.git/ - copy Configuration Folders across Created commit 424df2f: committing any new configuration changes! 3 files changed, 55 insertions(+), 1 deletions(-) create mode 100755 scripts/betty/gitConfig.sh error: Cannot access URL http://192.168.10.97:8000/repositories/HOH-config-backups.git/, return code 22 error: failed to push some refs to 'http://192.168.10.97:8000/repositories/HOH-config-backups.git' Git repo updated - backing up this script cp: cannot create regular file `/mnt/backups/scripts/betty/gitConfig.sh': Permission denied my crontab is: # m h dom mon dow command 04 * * * * /home/jon/gitConfig.sh > /tmp/gitconfig.log 2>&1 I open it by doing: $crontab -e i.e. not as root. I am a bit confused as to why it is not running as my user (or what user id 1000 is). Not sure what I need to do to get the push with git to work within crontab. edit: found out about the userid: jon@betty:~$ id uid=1000(jon) gid=1000(jon) groups=4(adm),20(dialout),24(cdrom),46(plugdev),109(sambashare),114(lpadmin),115(admin),1000(jon) here is my $HOME/.gitconfig file: [user] name = Jon Hawkins email = [email protected] Thanks

  Read the article

• Apache 2: I have multiple domain names I want to point to one Virtual Host. Do I use ServerAlias?

  - by Chris Altman

  I have multiple domain names, for example: www.foo.com www.goo.com www.moo.com www.coo.com I want all of these domain names to resolve to one website AND to redirect to www.foo.com What is the best method to achieve this? Multiple entries? Use ServerAlias? Something else? If the best method is ServerAlias, what is the syntax? ServerAlias www.goo.com, www.moo.com, www.coo.com

  Read the article

• git on HTTP with gitolite and nginx

  - by Arnaud

  I am trying to setup a server where my git repo would be accessible with HTTP(S). I am using gitolite and nginx (and gitlab for web interface but I doubt it makes any difference). I have searched the whole afternoon and I think I'm stuck. I have think I have understood that nginx needs fcgiwrap to work with gitolite, so I tried several configurations, but none of them work. My repositories are at /home/git/repositories. Here's the three nginx configurations I have tried. 1: location ~ /git(/.*) { gzip off; root /usr/lib/git-core; fastcgi_pass unix:/var/run/fcgiwrap.socket; include /etc/nginx/fcgiwrap.conf; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param DOCUMENT_ROOT /usr/lib/git-core/; fastcgi_param SCRIPT_NAME git-http-backend; fastcgi_param GIT_HTTP_EXPORT_ALL ""; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; fastcgi_param PATH_INFO $1; #fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... fatal: http://myservername/projectname.git/info/refs not found: did you run git update-server-info on the server? and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed 2: location ~ /git(/.*) { fastcgi_pass localhost:9001; include /etc/nginx/fcgiwrap.conf; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param GIT_HTTP_EXPORT_ALL ""; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; fastcgi_param PATH_INFO $1; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... fatal: http://myservername/projectname.git/info/refs not found: did you run git update-server-info on the server? and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed 3: location ~ ^.*\.git/objects/([0-9a-f]+/[0-9a-f]+|pack/pack-[0-9a-f]+.(pack|idx))$ { root /home/git/repositories/; } location ~ ^.*\.git/(HEAD|info/refs|objects/info/.*|git-(upload|receive)-pack)$ { root /home/git/repositories; fastcgi_pass unix:/var/run/fcgiwrap.socket; fastcgi_param SCRIPT_FILENAME /usr/lib/git-core/git-http-backend; fastcgi_param PATH_INFO $uri; fastcgi_param GIT_PROJECT_ROOT /home/git/repositories; include /etc/nginx/fcgiwrap.conf; } Result: > git clone http://myservername/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/projectname.git/info/refs fatal: HTTP request failed and > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 502 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed Also note that with any of those configurations, when I try to clone with a project name that actually doesn't exist, I get a 502 error. Does anyone already succeeded in doing this? What am I doing wrong? Thanks. UPDATE: nginx error log file said: 2012/04/05 17:34:50 [crit] 21335#0: *50 connect() to unix:/var/run/fcgiwrap.socket failed (13: Permission denied) while connecting to upstream, client: 192.168.12.201, server: myservername, request: "GET /git/oct_editor.git/info/refs HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "myservername" So I changed permissions for /var/run/fcgiwrap.socket, and now I have : > git clone http://myservername/git/projectname.git test/ Cloning into test... error: The requested URL returned error: 403 while accessing http://myservername/git/projectname.git/info/refs fatal: HTTP request failed Here is the error.log file I have now: 2012/04/05 17:36:52 [error] 21335#0: *78 FastCGI sent in stderr: "Cannot chdir to script directory (/usr/lib/git-core/git/projectname.git/info)" while reading response header from upstream, client: 192.168.12.201, server: myservername, request: "GET /git/projectname.git/info/refs HTTP/1.1", upstream: "fastcgi://unix:/var/run/fcgiwrap.socket:", host: "myservername" I keep on investigating.

  Read the article

• How can I put multiple markers on Google maps with Javascript API v3?

  - by Doe

  Hi, I'd like to know how to put multiple markers for Google Maps using Javascript API v3. I tried the solution posted here: http://stackoverflow.com/questions/1621991/multiple-markers-in-googe-maps-api-v3-that-link-to-different-pages-when-clicked but it does not work for me for some reason. var directionDisplay; function initialize() { var myOptions = { zoom: 9, center: new google.maps.LatLng(40.81940575,-73.95647955), mapTypeId: google.maps.MapTypeId.TERRAIN } var map = new google.maps.Map(document.getElementById("map_canvas"), myOptions); setMarkers(map, properties); var properties = [ ['106 Ft Washington Avenue',40.8388485,-73.9436015,'Mjg4'], ]; function setMarkers(map, buildings) { var image = new google.maps.MarkerImage('map_marker.png', new google.maps.Size(19,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var shadow = new google.maps.MarkerImage('map_marker_shadow.png', new google.maps.Size(28,32), new google.maps.Point(0,0), new google.maps.Point(10,32)); var bounds = new google.maps.LatLngBounds; for (var i in buildings) { var myLatLng = new google.maps.LatLng(buildings[i][1], buildings[i][2]); bounds.extend(myLatLng); var marker = new google.maps.Marker({ position: myLatLng, map: map, shadow: shadow, icon: image, title: buildings[i][0] }); google.maps.event.addListener(marker, 'click', function() { window.location = ('detail?b=' + buildings[i][3]); }); } map.fitBounds(bounds); } } </script> Could anyone kindly explain why this doesn't work for me?

  Read the article

• Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken;

  - by Elad Benda

  I have just followed this tutorial: https://developers.google.com/drive/quickstart-android so I don't see a reason for duplicated libs in my project. I have added the drive Client lib via Google plugin for eclipse When I build my android app with this manifest <uses-sdk android:minSdkVersion="15" android:targetSdkVersion="16" /> <uses-permission android:name="android.permission.READ_CALENDAR" /> <uses-permission android:name="android.permission.WRITE_CALENDAR" /> <uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE"/> <uses-permission android:name="android.permission.GET_ACCOUNTS"/> <uses-permission android:name="android.permission.INTERNET" /> <application android:icon="@drawable/todo" android:label="@string/app_name" > <activity android:name=".TodosOverviewActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".TodoDetailActivity" android:windowSoftInputMode="stateVisible|adjustResize" > <intent-filter> <action android:name="android.intent.action.SEND" /> <category android:name="android.intent.category.DEFAULT" /> <data android:mimeType="image/*" /> </intent-filter> </activity> <provider android:name=".contentprovider.MyTodoContentProvider" android:authorities="de.vogella.android.todos.contentprovider" > </provider> </application> I get the following error: [2013-10-27 00:43:58 - Dex Loader] Unable to execute dex: Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken; [2013-10-27 00:43:58 - de.vogella.android.todos] Conversion to Dalvik format failed: Unable to execute dex: Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken; how can I fix this?

  Read the article

• gitosis-admin git push failed, exec hooks/post-update

  - by v14nt0

  I'm following this tutorial http://scie.nti.st/2007/11/14/hosting-git-repositories-the-easy-and-secure-way after this step git commit -a -m "Allow jdoe write access to free_monkey" git push i always failed, with this error fatal: exec hooks/post-update failed. this is from my /home/git/repositories/gitosis-admin/hooks/post-update -rwxr-xr-x 1 git git 83 Mar 10 11:49 post-update so i change gitosis.conf manually from server for adding new repositories, and repos can work fine. i've google what might cause it, i want to admin gitosis in proper way Please Help Regards, REV

  Read the article

• Using sub-repo with hgwebdir difficulties in mercurial

  - by Ton

  Allright I got myself in a deadlock with Mercurial and sub-repos... Here's what happenend: I had a large mercurial repo that I server via apache and hgweb.cgi. Due to the size of the repo I decided to move to sub-repositories and share these with hgwebdir.cgi. Using the convert tool with the filemap option I created several sub-repositories: /main/foo /main/bar Nicely created an entry for the sub-repositories in .hgsub: foo = foo bar = bar And set hgwebdir.cgi up to show $/** as the root folder. Now when I went to my site (foo.com/hg) I saw my sub-repositories with one empty reposory among them (no name, no content), but I could not download it (archive location unknown): That was allright until I added a new sub-repository. I could not push the new .hgsub file to foo.com/hg, since that page is served by hgwebdir. The only method I can work currently is switch from hgwebdir to hgweb, commit .hgsubste and switch back to hgwebdir. Does someone have a good setup for such a mess?

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >