Search Results

Search found 12330 results on 494 pages for 'old retired dude'.

Page 250/494 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• Booting a GPT USB key on older BIOS laptop

  - by fonix232

  I have an old HP EliteBook 8530p, which does not support booting from GPT USB (GPT HDDs are fine though). Lately I had the wish to have a fast-to-start OS for browsing, smaller web tasks, etc., so I grabbed a ChromeOS build (latest one by ArnoldTheBat), flashed it on an 8GB flash drive, and popped it in. It did not boot, so I dug deeper and discovered that it actually is GPT, and cannot be converted to MBR. As my laptop does not support UEFI booting from USB (there's a really-really beta UEFI support in the BIOS, but as I said, it only supports GPT hard drives, not USB devices), I'm stuck. Is there any way of booting it, say, another flash drive with a specific boot loader/manager (e.g. Plop)?

  Read the article

• Are there other application layer firewalls like Microfot TMG (ISA) that do advanced http rules?

  - by Bret Fisher

  Since the old days ISA and now TMG have had several great features that I often want to deploy to my customers because of the enhanced functionality and security, but often the cost of an additinal server HW, Windows Server, and TMG license is too much to justify when compaired to a $300-500 appliance. Are there other gateway firewalls that can perform one or more of these application layer features: pre-auth incoming http traffic against AD/LDAP before sending packets to internal server (forms auth or basic creds popup)? read host headers of incoming http traffic (even on https) to a single public IP and route packets to different internal servers based on that host header?

  Read the article

• ProFTPd not in boot: Debian

  - by 50ndr33

  I just configured my new VPS with Apache, PHP, MySQL and ProFTPd. I wanted to install a smtp server, but I was advised to do a apt-get upgrade first. I did this, and I got up a blue screen where I could choose between two alternatives. It said something about GRUB 2 installer. I chose the alternative that was already selected, the topmost. I chose not to update the GRUB2, and use the old one that was installed. Now, ProFTPd doesn't start in boot anymore. I have to /etc/init.d/proftpd start every time. How do I fix this? Should I have chosen to update GRUB2? Should I do apt-get upgrade again and try to do the same GRUB2 installer again?

  Read the article

• How should I capture Linux kernel panic stack traces?

  - by Alnitak

  What's current best practice to capture full kernel stack traces on a Linux system (RHEL 5.x, kernel 2.6.18) that occasionally panics in a device driver? I'm used to the "old" SunOS way of doing things - crash dumps get written to swap, and on reboot the dump gets retrieved in the local file system. man 8 crash refers to diskdump, but that appears to be unsupported. and/or deprecated. I've played with kdump, but it's unclear whether I can get a stack trace from that. Triggering a panic via Magic SysRq didn't create one. It also seems wasteful to reserve so much memory (128MB) just for a kexec crash recovery kernel.

  Read the article

• How to lie to Win98 about USB drivers?

  - by BCS

  I have a new printer and a old (Windows 98) system (that can't be upgraded). I've been told that some of the drivers for older printers of the same make are very likely to work just fine for it if I can talk windows into using them. Is there a way to edit the map of device IDs (VID/PID?) to USB drivers? The specific kind of tool I'm looking for should work for any kind of USB drivers, not just printers. OTOH if someone knows of a technique that work for some kinds of printers, that could be of (general) interest.

  Read the article

• Redirect to new domain and preserve username

  - by David Brown

  I recently switched to a new domain for a version control server I run. The server is usually accessed with a username included in the url such as https://[email protected]/some/stuff. I want to redirect requests to the old domain to the new domain and preserve everything else in the url (including the username). So the former url would be redirected to https://[email protected]/some/stuff. Currently I have the following rewrite condition and rule: RewriteCond %{HTTP_HOST} sub\.olddomain\.com RewriteRule (.*) https://sub.newdomain.net$1 [R=301,L] This works except it drops the userinfo part of the URL. Is there a way I can preserve the user info?

  Read the article

• Connect through SSH and type in password automatically, without using a public key

  - by binary255

  A server allows SSH connections, but not using public key authentication. It's not within my power to change this at the moment (due to technical difficulties, not organizational) but I will get on it as soon as possible! What I need now is to execute commands on the server using plain old account+password authentication from a script. That is, I need to do it in a non-interactive way. Is it possible? And how do I do it? The client which will be executing the script runs Ubuntu Server 8.04. The server runs Cygwin and OpenSSH.

  Read the article

• IPv6 in a Small Business

  - by Martyn

  I’ve been tasked to identify a new server and IT equipment for the company I work for (employees <20). I’m looking at getting a SBS 2011 Standard box. My Question is: Apart from ensuring that our router is IPv6 compliant, is there anything else I need to do/investigate to ensure that we won’t have IPv6 related problems in the future? When investigating this I can only find references to DNS Mangers etc. The SBS 2011 box will be used for exchange and remote log in access – it won’t be hosting any websites. Also will VOIP phone systems be affected by IPv6? (We are running a rather old VOIP system, would that need to be updated?

  Read the article

• Sql Server 2008 Create Foreign Key Manually

  - by tgriffiths

  I have inherited an old database which wasn't designed very well. It is a Sql Server 2008 database which is missing quite a lot of Foreign Key relationships. Below shows two of the tables, and I am trying to manually create a FK relationship between dbo.app_status.status_id and dbo.app_additional_info.application_id I am using SQL Server Management Studio when trying to create the relationship using the query below USE myDatabase; GO ALTER TABLE dbo.app_additional_info ADD CONSTRAINT FK_AddInfo_AppStatus FOREIGN KEY (application_id) REFERENCES dbo.app_status (status_id) ON DELETE CASCADE ON UPDATE CASCADE ; GO However, I receive this error when I run the query The ALTER TABLE statement conflicted with the FOREIGN KEY constraint "FK_AddInfo_AppStatus". The conflict occurred in database "myDatabase", table "dbo.app_status", column 'status_id'. I am wondering if the query is failing because each table already contains approximately 130,000 records? Please help. Thanks.

  Read the article

• Windows 7 Ult machine can see XP Pro but not vice versa

  - by Chadworthington

  My new Windows 7 Ult. PC can attach to my work laptop and pull files but my work laptop cannot find my Windows 7 on the network. Is there some sort of limitation going on here? Before I got the new XP machine, my old XP Pro PC could pull files from the XP Pro laptop but not vice versa. The common thread seems to be that the work laptop cannot see other PCs, Windows 7 or not. Could it be because that PC is on a work domain? When I pull files from the work PC, I am prompted for domain credentials, which I provide.

  Read the article

• Compressed disk image on Linux

  - by Aaron Digulla

  I just got my new computer with a much bigger harddisk. I think I copied all important files over but just to be sure, I'd like to keep a disk image of my old disk. To save space, I'd like to compress it but I didn't find an option to mount a compressed image. My goals: Result must be easy to access No need to decompress the whole thing before I can access anything Files should be quick to locate - no TAR/CPIO archive Necessary space should be less than just copying the files over So ideally, I'm looking for a read-only, compressed file system which I can create in a file and which grows automatically.

  Read the article

• Exited Emacs without saving, did it save the file somewhere?

  - by rumtscho

  Hi, I am using Emacs on Windows XP. Had it open to take some notes in a meeting, but forgot to create a file first (the text got created in the usual "scratch" buffer). Then I closed a lot of applications after the meeting, forgetting to save the notes in Emacs :( I know that when I am modifying an existing file, it creates a backup of the old file in the same directory. But I don't know if the information from the scratch buffer is available somewhere after an exit without saving. Do you know if I can restore my information? I haven't shut down/suspended/hybernated the system since, so all temp files should be still accessible.

  Read the article

• Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

  - by Wuinny

  Hello, I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that i have to upgrade my drivers to play the game. So i did it. But since i did a clean install of the new Nvidia drivers, i just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers i was able to create custom resolution (1184*740) in Nvidia control panel but now when i try it tells me that "my monitor cannot support this resolution". When i insist, it works but soon as i shut down my computer i have to recreate it.. Do anyone have a fix ? Thank you

  Read the article

• What's causing "shutdown state" after TFTP reloaded Cisco `running-config` on 871?

  - by xtian

  Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I tested the 871's flash memory with fsck and rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config?

  Read the article

• Laptop goes black after a minute or so

  - by ZEDA-NL

  I have a laptop that is behaving strangely. When I turn it on, it does everything what it is supposed to do, but after a minute or so I hear a Click and all goes black. It's like it turns off the power. It doesn't matter what the laptop is doing. It also happens when it's just waiting in the Bios setup menu. Has someone experienced this before? Can it be the power supply? Can it be a cooling problem? Any ideas? By the way, it's a Compaq Presario Laptop, maybe 3 years old already.

  Read the article

• Nginx redirect one path to another

  - by SteveEdson

  I'm sure this has been asked before, but I can't find a solution that works. A website has switched CMS services, but has the same domain, how do I set up an nginx rewrite for a single page? E.g. Old Page http://sitedomain.co.uk/content/unique-page-name New page http://sitedomain.co.uk/new-name/unique-page-name Please note, I don't want everything within the content page to be redirected, but literally just the url mentioned above. I have about 9 redirects to set up, non of which fit in a pattern. Thanks! Edit: I found this solution, which seems to be working, except for the fact that it redirects without a slash: if ( $request_filename ~ content/unique-page-name/ ) { rewrite ^ http://sitedomain.co.uk/new-name/unique-page-name/? permanent; } But this redirects to: http://sitedomain.co.uknew-name/unique-page-name/

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• Move mailbox to public folder

  - by Kim Johansson

  Hello there! I need some help moving a users mailbox to a public folder. I'm not really a sysadmin, I know some AD and Windows Server, but Exchange is new stuff to me. Basically, one user has left the company, so we disabled his account in the AD, but now it's time for the mail. I need to move his old mail to a mailbox which the owern of the company and I can acess, then I would like to forward any new emails to that public folde How can I do this with Exchange 2007?

  Read the article

• Is it possible, and is it advisable, to host a mail server on a Windows Azure VM role?

  - by JcFx

  I know this question has been asked on various forums before, and that all the answer were negative, but many of the answers are quite old, and with Azure developing so quickly it seems useful to ask it again. Can we run a mail server (such as mailenable) on an Azure VM? And if not, why not? I've seen one posting on the MS forums (here) that suggests the IP of the Azure machine would be blacklisted as a source of spam. Why would this be (as opposed to hosting a mailserver on a dedicated box)?

  Read the article

• SSL/https setup for herokuapp.com address rather than my actual domain

  - by new2ruby

  I have a subdomain of my site pointed to a rails app at mysite.herokuapp.com. I bought a certificate from godaddy and seem to have that all set up correctly. So that when I go to: http://mysite.herokuapp.com or http://dev.mysite.com it's redirected to: https://mysite.herokuapp.com or https://dev.mysite.com The problem is that when I visit dev.mysite.com, I get the error: Safari can't verify the identity of the website. But when I go to mysite.herokuapp.com, I don't get the error. I wanted this to be set up the other way, so that dev.mysite.com did not cause the error. I'm not sure where I went wrong. I used dev.mysite.com when generating the key and when setting it up at godaddy.com. Any ideas where I should look? P.S. The old site is hosted at dreamhost and the DNS info is stored there as well. So I created a subdomain there of type cname which points to mysite.herokuapp.com.

  Read the article

• Advanced merge directory tree with cp in Linux

  - by mtt

  I need to: Copy all of a tree's folders (with all files, including hidden) under /sourcefolder/* preserving user privileges to /destfolder/ If there is a conflict with a file (a file with the same name exists in destfolder), then rename file in destfolder with a standard rule, like add "old" prefix to filename (readme.txt will become oldreadme.txt) copy the conflicted file from source to destination Conflicts between folders should be transparent - if same directory exists in both sourcefolder and destfolder, then preserve it and recursively copy its content according to the above rules. I need also a .txt report that describes all files/folders added to destfolder and files that were renamed. How can I accomplish this?

  Read the article

• Can't boot into XP after setting up dual boot with Win 7 vhd.

  - by bebop

  I set up a dual boot for win 7 from vhd on 2 xp machines. One of them everything went fine, and I get the option to choose the os when I turn the machine on. The other was slightly different in that rather than seeing the current OS disk (the one with XP on) as the c:\ when I was setting up windows 7 vhd during install it saw the disk as d:. I didn't think anything of it and went ahead and created a vhd on the d: drive. Now when I turn this machine on, it boots straight to win7 and I never get the option to choose xp. When I look at the boot option in msconfig, I only see Windows 7. How can I go about adding the old XP drive as a boot option at startup again? Edit: Strangely when I rebooted this time (perhaps the first time since I removed the install DVD) it boots to XP. I suppose I'll just have to reinstall windows 7 again in a new vhd...

  Read the article

• Dell Power Edge R515 - Replacing a Bad Hard Drive in a RAID

  - by LonnieBest

  I've ordered a new hard drive to replace a bad one in a Dell Power Edge R515. The manual covers obvious topics regarding physical replacing of hard drives, but I've never done this before on a production server where RAID is involved. I've heard people talk about this topic, and I've heard that some servers have RAID controllers that are smart enough to allow you to just put in the new drive (hot swap), and then the server will know automatically how to rebuild that drive to be what the old one was to the system. Where do I find the proper procedure for replacing a failed hard drive on a live production Dell Power Edge R515? Can someone with experience tell me how easy or hard this usually is?

  Read the article

• Windows 7 RC sleep on Thinkpad R51?

  - by Ragesh

  I have an old Thinkpad R51 and Windows 7 just doesn't give me a Sleep option. I suspect it's because it's running the default VGA driver. The machine has an Intel 855 GME graphics adapter but there doesn't seem to be a WDDM driver available publicly. Lenovo's driver download page just says that drivers for Vista are bundled with the OS. Apparently, they aren't bundled with Windows 7 as it always defaults to a generic VGA driver. Is there a reliable way to get Sleep to work on this machine?

  Read the article

• Windows XP Activation failed, now what?

  - by user26379

  I have a computer with (presumably unlicensed) Windows XP. The activation (over the internet) failed, and I now I cannot get into Windows. After calling Microsoft, it seems like I will have to reinstall everything and install a freshly bought operating system. What are my options here? Is it worth trying the millions of keys and key generators out there? EDIT: I have no way of contacting the manufacturer (it's a no-name box, definitely not Dell, HP or IBM). Would there actually be a key supplied with my version of XP? If its not genuine, wouldnt I just have any old key? And that key would fail activation any way?

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >